Struct std::num::Wrapping

1.0.0 · source · []
#[repr(transparent)]
pub struct Wrapping<T>(pub T);
Expand description

Provides intentionally-wrapped arithmetic on T.

Operations like + on u32 values are intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon modular arithmetic (e.g., hashing).

Wrapping arithmetic can be achieved either through methods like wrapping_add, or through the Wrapping<T> type, which says that all standard arithmetic operations on the underlying value are intended to have wrapping semantics.

The underlying value can be retrieved through the .0 index of the Wrapping tuple.

Examples

use std::num::Wrapping;

let zero = Wrapping(0u32);
let one = Wrapping(1u32);

assert_eq!(u32::MAX, (zero - one).0);
Run

Layout

Wrapping<T> is guaranteed to have the same layout and ABI as T.

Tuple Fields

0: T

Implementations

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::MIN, Wrapping(usize::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::MAX, Wrapping(usize::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::BITS, usize::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100usize);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0usize).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000usize);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<usize>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<usize>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<usize>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<usize>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3usize).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::MIN, Wrapping(u8::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::MAX, Wrapping(u8::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::BITS, u8::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u8);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u8).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u8);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u8>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u8>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u8>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u8>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u8).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::MIN, Wrapping(u16::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::MAX, Wrapping(u16::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::BITS, u16::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u16);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u16).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u16);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u16>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u16>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u16>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u16>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u16).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::MIN, Wrapping(u32::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::MAX, Wrapping(u32::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::BITS, u32::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u32);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u32).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u32);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u32>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u32>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u32>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u32>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u32).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::MIN, Wrapping(u64::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::MAX, Wrapping(u64::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::BITS, u64::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u64);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u64).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u64);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u64>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u64>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u64>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u64>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u64).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::MIN, Wrapping(u128::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::MAX, Wrapping(u128::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::BITS, u128::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u128);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u128).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u128);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u128>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u128>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u128>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u128>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u128).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::MIN, Wrapping(isize::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::MAX, Wrapping(isize::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::BITS, isize::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100isize);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0isize).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000isize);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<isize>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<isize>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<isize>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<isize>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3isize).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::MIN, Wrapping(i8::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::MAX, Wrapping(i8::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::BITS, i8::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i8);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i8).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i8);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i8>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i8>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i8>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i8>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::MIN, Wrapping(i16::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::MAX, Wrapping(i16::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::BITS, i16::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i16);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i16).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i16);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i16>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i16>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i16>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i16>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i16).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::MIN, Wrapping(i32::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::MAX, Wrapping(i32::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::BITS, i32::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i32);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i32).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i32);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i32>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i32>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i32>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i32>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i32).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::MIN, Wrapping(i64::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::MAX, Wrapping(i64::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::BITS, i64::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i64);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i64).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i64);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i64>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i64>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i64>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i64>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i64).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::MIN, Wrapping(i128::MIN));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::MAX, Wrapping(i128::MAX));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::BITS, i128::BITS);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i128);

assert_eq!(n.count_ones(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i128).count_zeros(), 0);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i128);

assert_eq!(n.trailing_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));
Run

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i128>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i128>>::from_be(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i128>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i128>>::from_le(n), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i128).pow(4), Wrapping(81));
Run

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(isize::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100isize).abs(), Wrapping(100));
assert_eq!(Wrapping(-100isize).abs(), Wrapping(100));
assert_eq!(Wrapping(isize::MIN).abs(), Wrapping(isize::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative
Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10isize).signum(), Wrapping(1));
assert_eq!(Wrapping(0isize).signum(), Wrapping(0));
assert_eq!(Wrapping(-10isize).signum(), Wrapping(-1));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10isize).is_positive());
assert!(!Wrapping(-10isize).is_positive());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10isize).is_negative());
assert!(!Wrapping(10isize).is_negative());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i8::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i8).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i8).abs(), Wrapping(100));
assert_eq!(Wrapping(i8::MIN).abs(), Wrapping(i8::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative
Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i8).signum(), Wrapping(1));
assert_eq!(Wrapping(0i8).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i8).signum(), Wrapping(-1));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i8).is_positive());
assert!(!Wrapping(-10i8).is_positive());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i8).is_negative());
assert!(!Wrapping(10i8).is_negative());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i16::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i16).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i16).abs(), Wrapping(100));
assert_eq!(Wrapping(i16::MIN).abs(), Wrapping(i16::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative
Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i16).signum(), Wrapping(1));
assert_eq!(Wrapping(0i16).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i16).signum(), Wrapping(-1));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i16).is_positive());
assert!(!Wrapping(-10i16).is_positive());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i16).is_negative());
assert!(!Wrapping(10i16).is_negative());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i32::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i32).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i32).abs(), Wrapping(100));
assert_eq!(Wrapping(i32::MIN).abs(), Wrapping(i32::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative
Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i32).signum(), Wrapping(1));
assert_eq!(Wrapping(0i32).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i32).signum(), Wrapping(-1));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i32).is_positive());
assert!(!Wrapping(-10i32).is_positive());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i32).is_negative());
assert!(!Wrapping(10i32).is_negative());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i64::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i64).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i64).abs(), Wrapping(100));
assert_eq!(Wrapping(i64::MIN).abs(), Wrapping(i64::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative
Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i64).signum(), Wrapping(1));
assert_eq!(Wrapping(0i64).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i64).signum(), Wrapping(-1));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i64).is_positive());
assert!(!Wrapping(-10i64).is_positive());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i64).is_negative());
assert!(!Wrapping(10i64).is_negative());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i128::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i128).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i128).abs(), Wrapping(100));
assert_eq!(Wrapping(i128::MIN).abs(), Wrapping(i128::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative
Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i128).signum(), Wrapping(1));
assert_eq!(Wrapping(0i128).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i128).signum(), Wrapping(-1));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i128).is_positive());
assert!(!Wrapping(-10i128).is_positive());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i128).is_negative());
assert!(!Wrapping(10i128).is_negative());
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(usize::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16usize).is_power_of_two());
assert!(!Wrapping(10usize).is_power_of_two());
Run
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2usize).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3usize).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u8::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u8).is_power_of_two());
assert!(!Wrapping(10u8).is_power_of_two());
Run
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u8).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u8).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u16::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u16).is_power_of_two());
assert!(!Wrapping(10u16).is_power_of_two());
Run
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u16).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u16).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u32::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u32).is_power_of_two());
assert!(!Wrapping(10u32).is_power_of_two());
Run
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u32).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u32).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u64::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u64).is_power_of_two());
assert!(!Wrapping(10u64).is_power_of_two());
Run
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u64).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u64).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u128::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);
Run
🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u128).is_power_of_two());
assert!(!Wrapping(10u128).is_power_of_two());
Run
🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u128).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u128).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));
Run

Trait Implementations

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

The resulting type after applying the + operator.

Performs the + operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Performs the += operation. Read more

Formats the value using the given formatter.

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

The resulting type after applying the & operator.

Performs the & operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

Performs the &= operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

The resulting type after applying the | operator.

Performs the | operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

Performs the |= operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

The resulting type after applying the ^ operator.

Performs the ^ operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Performs the ^= operation. Read more

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Returns the “default value” for a type. Read more

Formats the value using the given formatter. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

The resulting type after applying the / operator.

Performs the / operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Performs the /= operation. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

Formats the value using the given formatter.

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

The resulting type after applying the * operator.

Performs the * operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

Performs the *= operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the - operator.

Performs the unary - operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

The resulting type after applying the ! operator.

Performs the unary ! operation. Read more

Formats the value using the given formatter.

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

The resulting type after applying the % operator.

Performs the % operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

Performs the %= operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

The resulting type after applying the << operator.

Performs the << operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

Performs the <<= operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

The resulting type after applying the >> operator.

Performs the >> operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

Performs the >>= operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

The resulting type after applying the - operator.

Performs the - operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Performs the -= operation. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Method which takes an iterator and generates Self from the elements by “summing up” the items. Read more

Formats the value using the given formatter.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

Uses borrowed data to replace owned data, usually by cloning. Read more

Converts the given value to a String. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.