Xpra is a tool which allows you to run X programs --- usually on a
remote host --- and then direct their display to your local machine,
disconnect from these programs, and reconnect from the same or another
machine, all without losing any state. It differs from standard X
forwarding in that it allows disconnection and reconnection without
disrupting the forwarded application; it differs from VNC and similar
remote display technologies in that xpra can run rootless: i.e.,
applications forwarded by xpra appear on your desktop as normal
windows managed by your window manager, rather than being all "trapped
in a box together". Xpra also uses a custom protocol that is
self-tuning and relatively latency-insensitive, and thus is usable
over network connections that are too slow or unreliable for standard
X forwarding.
Xpra can also be used to shadow an existing X11 display, or in
desktop mode where it behaves more like VNC.
By default the Xpra server announces available sessions (username and display
number) via mDNS to the local network. Use mdns=no to disable it.
CONNECTION STRINGS
Xpra supports many types of connection strings (some may require extra
packages to be installed):
:DISPLAY
Local displays: this is the simplest form and is only valid for the
current local displays of the current user.
TCP mode uses port numbers and not display numbers. If multiple displays
are available through a single TCP port (ie: using a proxy server),
then one can also specify the display number.
SSL adds a secure socket layer on top of the TCP mode.
Almost identical to the TCP mode, but using AF_VSOCK for transport.
ws://[USERNAME[:PASSWORD]@]HOST:PORT/[DISPLAY]
Connect using websocket protocol.
Connect using secure websocket protocol. (websocket with SSL)
Connect using secure shell. (SSH)
Further options can be specified using the --ssh command line option.
The QUERYSTRING can be used to specify an ssh proxy:
?proxy=ssh://[USERNAME[:PASSWORD]@]HOST[:SSH_PORT]
xpra will then establish an SSH connection to the specified "proxy" host,
and from that host xpra will set up an SSH connection to the xpra server.
For backwards compatibility, SSH mode also supports the syntax:
ssh:[USERNAME[:PASSWORD]@]HOST:DISPLAY but this form does not
support specifying the SSH port number.
Older versions also used the form protocol:host:port, but users
are encouraged to move to a more standard URI format using :// as
separator.
The password need only be specified when the server authentication module
requires it. (ie: often when authenticating against MS Windows servers,
or with multifile and sqlite authentication modules)
EXAMPLES
- xpra start :7
-
Start an xpra server using display number :7.
Note: using DISPLAY=:7 xterm to start applications against
a specific display is not recommended. Always prefer using xpra's
--start= command line option instead.
See this next example:
- xpra start --start=firefox
-
Start an xpra server, choosing a display automatically and start
firefox on that virtual display.
No window will appear until you attach with xpra attach.
The start child commands will inherit an environment tailored
for running under xpra.
- xpra start ssh://bigbox/7 --start=xterm
-
Start an xpra server on bigbox with an xterm in it,
and connect to it.
- xpra start-desktop --start=xfce4-session
-
Start an xfce session in a nested X11 server on an automatically
assigned display number.
- xpra list
-
Show a list of xpra servers you have running on the current host.
- xpra list-windows
-
Show a list of xpra servers you have running on the current host,
including the session name and a list of windows.
(only if the session can be queried using xpra info)
- xpra list-mdns
-
Show a list of xpra servers found via mDNS. (local network)
- xpra showconfig
-
Shows the configuration that would be used with other sub-commands,
taking into account the command line arguments.
- xpra showsetting [SETTING1..]
-
Shows the value of a specific configuration setting and which
configuration directory set this value.
- xpra attach :7
-
Attach to the xpra server that is using local display number :7.
Any apps running on that server will appear on your screen.
- xpra attach ssh://foo@frodo/7
-
Use ssh to attach to the xpra server that is running on machine
frodo as user foo and using display :7.
Any apps running on that server will appear on your local screen.
- xpra start :7 --start=screen
-
Start an xpra server and a screen(1) session. If any of the
applications inside screen attempt to use X, they will be directed to
the xpra server.
DISPLAYS
Understanding the basic idea of displays is critical to using xpra
successfully.
The idea comes from standard X. If you have multiple X servers
running on the same host, then there has to be some way to distinguish
them. X does this by assigning each server a small, unique integer
called (perhaps confusingly) its "display". In the common case of a
desktop machine that has only one X server running, that server uses
display ":0" (or sometimes you'll see ":0.0", which is effectively the
same). When an application starts under X, it needs to know how to
find the right X server to use; it does this by checking the
environment variable $DISPLAY.
Xpra faces a similar problem --- there may be multiple xpra servers
running on the same host, as well as multiple X servers. It
solves this problem by re-using X's solution --- each xpra server has
a display associated with it. This display functions as both an X
display (for when xpra is talking to X applications) and as an
identifier by which xpra clients (like xpra attach) can locate
the xpra server.
You may omit the display number when using xpra start:
a display will be chosen for you automatically.
The display number chosen will be shown in the log output, you should
also be able to see it with xpra list.
On Microsoft Windows and Mac OSX, the display number should be omitted.
Otherwise, when starting an xpra server, you may want to specify
the name of the display to use. To do this, simply pick any number
you like and stick a colon in front of it.
For instance :7, :12, and :3117 are all valid display names.
Just keep in mind that:
- •
-
Every X or xpra server that is running on a single machine must use a
different display name. If you pick a number that is already in use
then xpra will not work.
- •
-
The first few numbers (0, 1, 2) are commonly used by real X servers.
- •
-
Everyone who connects to a given machine using ssh(1) with X
forwarding enabled will also use a display number; ssh generally picks
numbers near ten (10, 11, 12, ...).
When specifying an xpra server to a client program like xpra
attach, xpra detach, xpra stop, xpra exit,
xpra version, xpra info, xpra list or xpra screenshot then you
can use a display of the form
:DISPLAY to refer to a server on the local host, or one of
the form ssh://[USER@]HOST/DISPLAY to refer to a server
on a remote host; xpra will automatically connect to the remote host
using ssh(1). Generally, if you have only one xpra session
running on a machine (which you can verify by running xpra list
on that machine), then you can omit the number entirely; xpra
attach alone will attach to the lone xpra server on the current
machine regardless of its number, xpra attach ssh://frodo will
similarly attach to the lone xpra session on a remote machine.
Connecting using the display number assumes that the client and server
use the same configuration for socket directories, or at least that
the client can find at least one of the directories used by
the unix domain sockets (see bind, socket-dir and
socket-dirs).
If the xpra server was given the --bind-tcp, --bind-ssl
--bind-udp=[HOST]:PORT,
--bind-ws, --bind-wss or --bind-vsock option
when started then you can also connect
to it using a display of the form tcp://HOST:PORT[/DISPLAY],
udp://HOST:PORT[/DISPLAY], ssl://HOST:PORT[/DISPLAY],
ws://HOST:PORT[/DISPLAY], wss://HOST:PORT[/DISPLAY] or
vsock://HOST:PORT[/DISPLAY].
SUBCOMMANDS
xpra start
This command starts a new xpra server, including any necessary setup.
(When starting a remote server with the ssh://HOST/DISPLAY syntax,
the new session will also be attached.)
xpra start-desktop
Starts a nested X11 server, all child commands will be started in the
nested X11 server.
xpra attach
This command attaches to a running xpra server, and forwards any
applications using that server to appear on your current screen.
xpra detach
Detaches the given xpra display.
xpra screenshot
Takes a screenshot and saves it to the filename specified.
Note: screenshots can only be taken when a client is attached.
xpra version
Queries the server version and prints it out.
Note: older servers may not support this feature.
xpra info
Queries the server for version, status and statistics.
xpra top
Shows the server's key health attributes.
xpra control
Modify the server at runtime by issuing commands.
The list of commands can be obtained by specifying "help" as command.
Some of those commands may support a "help" mode themselves.
xpra initenv
This internal command creates the run-xpra script used with ssh
connections.
xpra stop
This command attaches to a running xpra server, and requests that it
terminates immediately. This generally causes any applications using
that server to terminate as well.
xpra exit
This command attaches to a running xpra server, and requests that it
terminates immediately. Unlike xpra stop, the Xvfb process and
its X11 clients (if any) will be left running.
xpra showconfig
This commands shows the configuration which would be used
given the arguments provided.
You can also specify as extra arguments the specific options that
should be displayed, or use the special value all to
display all the options including the ones which are normally not
displayed because they are not relevant on the given system.
xpra list
This command finds all xpra servers that have been started by the
current user on the current machine, and lists them.
xpra upgrade
This command starts a new xpra server, but instead of creating it from
scratch, it attaches to another existing server, tells it to exit, and
takes over managing the applications that it was managing before. As
the name suggests, the main use case is to replace a server running
against an older version of xpra with a newer version, without having
to restart your session. Any currently-running xpra attach
command will exit and need to be restarted.
xpra upgrade-desktop
Same as upgrade but for servers started using start-desktop.
It is possible to upgrade seamless server into a desktop server
and vice versa.
xpra shadow
This command shadows an existing X11 display. If there is only one
X11 display active and its number is below 10, it can be auto-detected.
Note that this mode of operation uses screenscraping which is far less
efficient. Using a video encoder (h264 or vp8) is highly recommended for
this mode of operation.
xpra proxy
This command allows a single server to proxy connections for multiple
others, potentially serving as a load balancing or authentication
entry point for many sessions.
The proxy server will spawn a new process for each proxy connection,
this proxy process will create an unauthenticated new unix domain socket
which can be used with the subcommands info, version and
stop.
Important Note
Some platforms and package managers may choose to only build the client
and not the server. In this case, only the attach subcommand will
be available.
OPTIONS
General options
- --version
-
Displays xpra's version number.
- -h, --help
-
Displays a summary of command line usage.
- -d FILTER1,FILTER2,..., --debug=FILTER1,FILTER2,...
-
Enable debug logging. The special value all enables all
debugging.
- --mmap=yes|no|ABSOLUTEFILENAME
-
Enable or disable memory mapped pixel data transfer.
By default it is normally enabled automatically if the server and the
client reside on the same filesystem namespace.
This method of data transfer offers much lower overheads
and reduces both CPU consumption and local network traffic.
When attaching, you can also specify an absolute path where
the mmap file will be created.
- --mmap-group=GROUP
-
Sets the mmap file's gid to the group specified, and sets
the permissions to 660.
This is necessary to share the mmap file across user accounts.
You can also use the special GROUP values:
-
- no
-
Disable the functionality, the mmap file will use the default file
permissions and default group ownership.
- SOCKET
-
The group used will be the same one as found on the
unix domain socket file the client connects to.
Obviously, this can only work when connecting to unix domain
sockets.
- auto
-
Will use the 'xpra' group if the user is a member,
otherwise it will fallback to the same behaviour as SOCKET.
-
--windows=yes|no
Enable or disable the forwarding of windows. This is usually
the primary use for xpra and should be enabled.
- --min-size=WIDTHxHEIGHT
-
Sets the minimum size for all decorated windows.
- --max-size=WIDTHxHEIGHT
-
Sets the maximum size for all windows.
- --readonly=yes|no
-
Read only mode ignores all keyboard and mouse activity.
-
--clipboard=yes|no|clipboard-type
Enable or disable clipboard synchronization.
If disabled on the server, no clients will be able to use clipboard
synchronization at all. If turned off on the client, only this
particular connection will ignore clipboard data from the server.
This can also be used to specify a different clipboard implementation.
The clipboard types available will vary from platform to platform and
also depend on build time environment and options
so this is best left on auto.
Other clipboard types available may include:
-
- translated
-
Clipboard which can translate from one type of selection to another
- GDK
-
The most complete clipboard implementation, includes full X11 support
- default
-
Fallback clipboard, with limited X11 support
- OSX
-
OSX specific clipboard
- --clipboard-direction=to-server|to-client|both|disabled
-
Choose the direction of the clipboard synchronization.
- --pulseaudio=yes|no
-
Enable or disable the starting of a pulseaudio server with the session.
- --pulseaudio-command=SERVER-START-COMMAND
-
Specifies the pulseaudio command to use to start the pulseaudio
server, unless disabled with pulseaudio=no.
- --session-name=VALUE
-
Sets the name of this session. This value may be used in
notifications, utilities, tray menu, etc.
Setting this value on the server provides a default value which
may be overridden on the client.
- --encoding=ENCODING
-
This specifies the image encoding to use,
there are a number of encodings supported:
jpeg, png, png/P, png/L, webp, rgb, vp8, vp9, h264 and h265
(some may not be available in your environment).
The default option is auto which allows the server to
select the best encoding automatically.
-
- auto
-
default mode: the built-in heuristics will choose the most appropriate encoding
- png
-
compressed and lossless, can be quite slow.
- png/P
-
compressed and lossy: it uses a colour palette, which means better compression but still slow.
- png/L
-
compressed and lossy: grayscale only using a palette.
- rgb
-
a raw pixel format (lossless) compressed with lz4, lzo or zlib (see compressors)
the compression ratio is lower, but it is by far the fastest encoding available.
- webp
-
can be used in lossy or lossless mode,
useful for graphical applications,
it compresses better than jpeg and is reasonably fast except at high resolutions.
- jpeg
-
can be useful for graphical applications,
it is lossy and usually very fast.
- vp8
-
lossy video encoding which always uses colour subsampling.
Fast at encoding and decoding.
- vp9
-
Video encoding which supports both lossy and lossless modes,
available if your ffmpeg library version is recent enough.
- h264
-
One of the best encoding available: it is fast, efficient
and tunable via the quality and speed options.
- h265
-
Far too slow at encoding, avoid.
The default encoding which is automatically selected
if you do not specify one
will depend on what options are available on both
the server and the client:
rgb is always available (builtin),
jpeg and png require the Python Imaging Library,
vp8, vp9, webp, h264 and h265
all require their respective shared libraries,
as well as the xpra codec that uses them.
Note: when selecting a video encoding (usually h264, vp8 or vp9),
it will only be used if the screen is updating quickly enough,
some of the smaller screen updates will also be sent using
one of the other non-video encodings.
-
--video-scaling=on|off|SCALING
How much automatic video downscaling should be used,
from 1 (rarely) to 100 (aggressively), 0 to disable.
Video scaling is normally used with video regions or very large windows
(especially full screen windows) to try to maintain a decent framerate.
Video downscaling negatively affects visual quality
and will cause automatic refreshes (if enabled), it is most
useful on video content where it saves a considerable amount of bandwidth.
-
--socket-dir=DIR
Location where to write and look for the Xpra socket files.
The default location varies from platform to platform
("~/.xpra" on most Posix systems).
If unspecified, the first value from socket-dirs will be used.
It may also be specified using the XPRA_SOCKET_DIR environment variable.
When using the socket-dir option, it is generally necessary to specify
socket-dir or socket-dirs on all following commands,
for xpra to work with the open sessions.
By specifying a shared directory this can be coupled with the
mmap-group and socket-permissions option to connect
Xpra sessions across user accounts with shared memory acceleration.
-
--socket-dirs=DIR
Specifies the directories where to look for existing sockets if
a specific one was not set using socket-dir.
You may specify each directory using a new --socket-dirs
command line argument, or joined together by the path separator (: on Posix).
The paths will be expanded.
(ie: --socket-dirs=~/.xpra:/tmp)
-
--file-transfer=on|off
Enable file transfers.
- --open-files=on|off
-
This option may be used to allow the remote end to automatically
open files after they have been uploaded.
This may be a security risk if you are using xpra to constrain
what the clients can execute on the server.
-
--forward-xdg-open=on|off
Intercept execution of xdg-open and forward the request to the client.
-
--open-command=COMMAND
The command to use for opening files and URLs.
-
--bandwidth-limit=BITSPERSECOND
Restrict bandwidth usage to below the limit given.
The client's value cannot raise the limit of the server.
The value may be specified using standard units, ie:
1Mbps or 500K.
In auto mode, the client will set the bandwidth limit
value to 80% of the maximum speed of the network interface
it is using to connect to the server.
Options for start, start-desktop, upgrade, proxy and shadow
- --daemon=yes|no
-
By default, the xpra server puts itself into the background,
i.e. 'daemonizes', and redirects its output to a log file.
This can be used to prevent that behavior (useful mostly for debugging).
-
--resize-display=yes|no
Resize the virtual display to match the resolution of
the client currently connected.
This only applies to the start and start-desktop
subcommands.
-
--fake-xinerama=PATH|auto|no
Specify the path to the libfakeXinerama.so library which
will be injected into all the child processes the server starts
using LD_PRELOAD.
This can also be disabled or set to auto: the server
will then try to locate the library itself.
This only applies to the start subcommand.
-
--chdir=DIR
Change to this directory after daemonizing.
-
--uid=UID and --gid=GID
When launching the server as root, these options can be used
to drop privileges to the given UID / GID.
-
--pidfile=FILENAME
Writes the server process ID to this file on startup.
If the file has not been replaced,
it will be deleted when the server exits.
-
--bind=BIND_LOCATION
Create a local Unix domain socket (on Unix)
or named-pipe (on MS Windows) for each bind option specified.
This option can be specified multiple times to specify multiple
socket locations.
These sockets support local connections with the :7-style display
address, and remote connections with the ssh://frodo/7-style
display address.
Local sockets may also process HTTP / Websocket connections
if the html switch is enabled.
The location can take the form:
-
- none
-
do not create a socket
- auto
-
backwards compatible default which uses the current socket-dir
- DIRECTORY/
-
create a socket in the directory specified, if the directory does
not exist then it will be created - you should include the trailing
slash to prevent the confusion with the PATH form:
- PATH
-
create the socket using the path specified
- --bind-tcp=[HOST]:PORT
-
Create a TCP socket for each --bind-tcp option specified.
If the host portion is omitted, then 127.0.0.1 (localhost) will be
used. If you wish to accept connections on all interfaces, pass
0.0.0.0 for the host portion.
Using this switch without using the tcp-auth option is not recommended,
and is a major security risk (especially when passing 0.0.0.0)!
Anyone at all may connect to this port and access your session.
TCP sockets may also process HTTP / Websocket connections
if the html switch is enabled.
TCP sockets may also be upgraded to SSL sockets if the
ssl switch is enabled.
- --bind-udp=[HOST]:PORT
-
Create a UDP socket for each --bind-udp option specified.
If the host portion is omitted, then 127.0.0.1 (localhost) will be
used. If you wish to accept connections on all interfaces, pass
0.0.0.0 for the host portion.
Using this switch without using the udp-auth option is not recommended,
and is a major security risk (especially when passing 0.0.0.0)!
Anyone at all may connect to this port and access your session.
UDP sessions are trivial to hijack for anyone able to sniff
even just a single packet, it should only be used in very specific
use-cases, and never over unsecured networks.
- --bind-ws=[HOST]:PORT
-
Create an HTTP / Websocket listener.
See bind-tcp for host restrictions,
you should use the auth-ws to secure access.
- --bind-wss=[HOST]:PORT
-
Create an HTTPS / Secure Websocket listener.
See bind-tcp for host restrictions,
you should use the auth-wss to secure access.
- --bind-ssl=[HOST]:PORT
-
Just like --bind-tcp but for SSL sockets.
See ssl-auth and the other SSL options.
- --bind-rfb=[HOST]:PORT
-
Listens for RFB connections on the given port.
These sockets are only supported with the start-desktop and
shadow modes.
- --bind-vsock=CID:PORT
-
Create a VSOCK socket for each --bind-vsock option specified.
- --auth=MODULE[:OPTION=VALUE]
-
Specifies the authentication module to use for unix domain sockets
created using the bind switch. Authentication modules can
validate a username and password against a variety of backend modules:
-
- allow
-
always allows authentication - this is dangerous
and should only be used for testing
- fail
-
always fails authentication, useful for testing
- env
-
matches against the environment variable specified by the name option
(which defaults to XPRA_PASSWORD).
ie: --auth=env:name=SOME_OTHER_ENV_VAR_NAME.
- password
-
matches against the password specified using the value option.
ie: --auth=password:value=YOURPASSWORD.
Note: this command line option may be exposed to other processes
on the same system.
- file
-
checks the password against the password data found in the file
specified using the filename option.
ie: --auth=file:filename=./password.txt.
The contents of this file will be treated as binary data,
there are no restrictions on character encodings or file size.
Beware of trailing newline characters which will be included in the
password data.
- multifile
-
checks the username and password against the file specified using
the filename option.
The file must contain each user credentials on one line of the form:
username|password|uid|gid|displays|env_opts|session_opts
It is not possible to have usernames or password that contain
the pipe character | which is used as delimiter, or newlines
and carriage returns.
This module is deprecated, sqlite should be used instead.
- sqlite
-
- mysql
-
- sql
-
checks the username and password against the sqlite database file
specified using the filename option (for the sqlite backend),
or the database specified using the uri option
(mysql and sql backends).
The authentication will be processed using the following query
(which is configurable using the password_query option):
SELECT password FROM users WHERE username=(?)
The sessions available for each user will be queried using:
(this is configurable using the sessions_query option):
SELECT uid, gid, displays, env_options, session_options
FROM users WHERE username=(?)
Multiple displays may be specified as a comma separated list.
- hosts
-
checks the host using the system's tcp-wrappers library.
(Posix only, and not available on Mac OS)
See hosts.allow and hosts.deny for details.
- exec
-
Executes the command specified using the command attribute,
the arguments to this command are: a description of the access
request and the timeout value. (also configurable)
If the command is not specified, the system will try to locate
and use the auth_dialog utility which is shipped with xpra.
The command should return 0 to allow access, any other value will
deny access.
- peercred
-
checks the unix domain socket peer credentials using SO_PEERCRED.
This authentication module is only available on some Posix compliant
operating systems. This module will verify that the operating system
provides the uid and gid of the process that initiated the connection.
Access can be restricted by supplying a colon separated list of valid
uids and gids that are allowed to connect.
Those id values may be specified using numerical values or using
the usernames / group names.
This module is different from the others in that it will not require
the client to supply a username or password, as those are ignored.
Environment variables and pseudo-environment variables may also be used
as values, eg: --auth=peercred:uid=\$UID:fred,gid=xpra.
- pam
-
validates the username and password using the PAM system
- win32
-
validates the username and password using Microsoft Windows
authentication (only available on this platform)
- sys
-
chooses the appropriate system authentication module
automatically (either pam or win32)
- kerberos-password
-
validates the username and password using kerberos authentication.
Warning: this module does not use kerberos tickets and the password
will be sent in plain text to the server. This should only be used
for testing.
- kerberos-ticket
-
validates a kerberos ticket obtained by the client.
- gss
-
validates a GSS ticket obtained by the client.
- u2f
-
requests a U2F token from the client.
- ldap
-
validates the username and password against an LDAP server,
using the python-ldap library.
- ldap3
-
validates the username and password against an LDAP server,
using the python ldap3 library.
- --tcp-auth=MODULE
-
Just like the auth switch, except this one only applies
to TCP sockets (sockets defined using the bind-tcp switch).
- --udp-auth=MODULE
-
Just like the tcp-auth switch, except this one only applies
to UDP sockets (sockets defined using the bind-udp switch).
- --ws-auth=MODULE
-
Just like the auth switch, except this one only applies
to ws sockets: sockets defined using the bind-ws switch,
or TCP sockets upgraded to websockets. (if the html option is enabled).
- --wss-auth=MODULE
-
Just like the auth switch, except this one only applies
to wss sockets: sockets defined using the bind-wss switch,
ws sockets upgraded to SSL (if the ssl option is enabled) or
TCP sockets upgraded to SSL and then to wss.
(if both the ssl and html options are enabled).
- --ssl-auth=MODULE
-
Just like the auth switch, except this one only applies
to SSL sockets: sockets defined using the bind-ssl switch,
or TCP sockets upgraded by ssl=auto or ssl=on.
- --rfb-auth=MODULE
-
Authentication module to use for the bind-rfb sockets.
- --vsock-auth=MODULE
-
Just like the auth switch, except this one only applies
to VSOCK sockets (sockets defined using the bind-vsock switch).
- --challenge-handlers=MODULE:options
-
Configures which challenge handlers are used by the client and in
which order. This option may be repeated to specify multiple handlers,
which can be useful if the server sends more than one authentication
challenge.
The default value is: all which corresponds to:
uri,file,env,kerberos,gss,u2f,prompt.
-
- uri
-
Use the password specified on the connection string, if any.
- file
-
The filename used to store the password can be specified using the
filename option.
If this option is not specified, it will fallback to using the
password filename specified with the password-file switch.
- env
-
Use the password specified using the environment variable
specified using the name option, which defaults to
XPRA_PASSWORD if unspecified.
- kerberos
-
Requests a kerberos token for the service specified.
- gss
-
Requests a gss token for the service specified.
- u2f
-
Requests a token from a U2F device.
- prompt
-
Prompt the user for the value.
Terminal clients prompt using text input, GUI clients
use a dialog.
-
--min-port=PORT
The minimum port number allowed when creating UDP and TCP sockets.
You can use a lower value to allow unprivileged users to bind to
privileged ports when starting sessions via the system wide proxy server.
The default value is 1024 which is the standard value for privileged ports.
- --mdns=yes|no
-
Enable or disable the publication of new sessions via mDNS.
- --dbus-launch=COMMAND|no
-
Start the session within a dbus-launch context, you can specify
the dbus launch command to use, or turn it off completely.
Some features may not be available without a dbus context.
- --dbus-proxy=yes|no
-
Allows the client to forward dbus calls to the server.
- --dbus-control=yes|no
-
Start a dbus server which can be used to interact with the server
process.
Options for start, start-desktop, upgrade
- --exec-wrapper=CMD
-
A wrapper command which is prepended to all start commands.
Typically, this is used for starting all sub-commands via VirtualGL.
- --start=CMD
-
After starting the server, runs the command CMD using the
default shell. The command is run with its $DISPLAY set to point to
the newly-started server. This option may be given multiple times to
start multiple commands.
- --start-child=CMD
-
Identical to --start, except that the commands are taken into
account by --exit-with-children.
- --start-after-connect=CMD
-
Wait for the first client to connect before starting the command.
- --start-child-after-connect=CMD
-
Wait for the first client to connect before starting the child command.
See start-child.
- --start-on-connect=CMD
-
Execute this command every time a client connects.
- --start-child-on-connect=CMD
-
Execute this child command every time a client connects.
See start-child.
- --start-on-last-client-exit=CMD
-
Execute this command every time a client disconnects and there are
no other clients left.
- --start-child-on-last-client-exit=CMD
-
Execute this child command every time a client disconnects and there are
no other clients left.
See start-child.
- --terminate-children=yes|no
-
On server stop, terminate all the child commands that have been started
by the server. This does not affect server exit.
Most child commands are tied to the display so they are normally
forced to shutdown anyway, but this gives them more time to cleanup properly
and can be used to stop background commands that aren't tied to a display.
- --exit-with-children=yes|no
-
This option may only be used if --start-child is also
given. If it is given, then the xpra server will monitor the status
of the children started by --start-child, and will
automatically terminate itself when the last of them has exited.
- --exit-with-client=yes|no
-
The server will terminate when the last client disconnects.
- --env=KEY=VALUE
-
Extra environment variables which will only affect commands started using
fB--start or --start-child.
- --start-new-commands=yes|no
-
Allow clients to ask the server to execute new commands.
(this can also be used via the control channel)
- --start-via-proxy=yes|no|auto
-
If enabled, the start and start-desktop subcommands
will be delegated to the system wide proxy server instance.
With auto mode, this delegation will only occur if the
system wide proxy server is found.
- --systemd-run=yes|no|auto
-
Wrap server start commands with systemd-run.
- --systemd-run-args=ARGS
-
Command line arguments passed to systemd-run.
- --use-display
-
Use an existing display rather than starting one with xvfb.
You are responsible for starting the display yourself.
This can also be used to rescue an existing display whose
xpra server instance crashed or for running xpra against
an accelerated X11 server.
- --displayfd=FD
-
The xpra server will write the display number back on this
file descriptor as a newline-terminated string.
This is most useful when the display number is not specified
with the xpra start or start-desktop subcommands.
- --xvfb=CMD
-
When starting a seamless server, xpra starts a virtual X server to
run the clients on. If your Xvfb is installed in a
funny location, or you want to use some other virtual X server, then
this switch allows you to specify how to run your preferred X server
executable. The default value used depends on your platform.
For more information, see:
https://xpra.org/Xdummy.html
- --sync-xvfb=DELAY
-
The windows are normally only displayed on the client(s), they are
not painted on the virtual display.
Some applications like screen recorders may want to capture the
window contents, you can use this option to enable painting with
a configurable delay (in milliseconds).
Warning: this extra painting is expensive and quite slow, which is why
it is not enabled by default.
- --attach=yes|no|auto
-
Once the server has started, immediately connect a client to it.
With the value auto, a client is started for remote servers
only. (servers specified via a network URI)
Options for start, start-desktop, upgrade, shadow
- --tcp-proxy=HOST:PORT
-
Specifies the address to which non-xpra packets will be forwarded.
This can be used to share the same TCP port with another
TCP servers, usually a web server.
xpra clients will connect as usual, but any client that does not
speak the xpra protocol will be forwarded to the alternative
server.
- --html=on|off|auto|webrootpath
-
Respond to HTTP requests on the TCP port(s) and local sockets.
This requires at least one TCP or local socket to be configured
using the matching bind option.
The auto mode will enable support if possible.
By default the server will provide access to the HTML5 client.
You can also specify your own web root path as argument.
-
--rfb-upgrade=DELAY
Allows RFB clients (ie: VNC) to connect to a plain TCP socket.
If no data is received after DELAY seconds, the server
will send a RFB handshake.
This option is only applicable to servers started in
start-desktop or shadow modes.
-
--video-encoders=ENCODERS
Specifies the video encoders to try to load.
By default, all of them are loaded, but one may want to specify
a more restrictive list of encoders.
Use the special value 'help' to get a list of options.
Use the value 'none' to not load any video encoders.
- --csc-modules=MODULES
-
Specifies the colourspace conversion modules to try to load.
By default, all of them are loaded, but one may want to specify
a more restrictive list of modules.
Use the special value 'help' to get a list of options.
Use the value 'none' to not load any colourspace conversion modules.
- --socket-permissions=ACCESS-MODE
-
Specifies the file permissions on the server's unix domain sockets.
Defaults to 600. This is ignored when mmap-group is enabled.
Options for start, start-desktop, upgrade and attach
- --encryption=CIPHER
-
Specifies the cipher to use for securing the connection from
prying eyes.
This option requires the use of the --encryption-keyfile option.
The only cipher supported at present is AES, if the client
requests encryption it will be used by both the client and server
for all communication after the initial password verification,
but only if the server supports this feature too.
Note: this feature has not been extensively reviewed and as it is
it should not be considered safe from determined attackers.
- --tcp-encryption=CIPHER
-
Just like the encryption switch, except this one only applies
to TCP sockets (sockets defined using the bind-tcp switch).
- --encryption-keyfile=FILENAME
-
Specifies the key to use with the encryption cipher specified
with --encryption. The client and server must use the
same keyfile contents.
- --tcp-encryption-keyfile=FILENAME
-
Just like the encryption-keyfile switch, except this one only applies
to TCP sockets (sockets defined using the bind-tcp switch).
- --idle-timeout=IDLETIMEOUT
-
The connection will be terminated if there is no user activity
(mouse clicks or key presses) for the given amount of time
(in seconds). Use the value 0 to disable this timeout.
- --server-idle-timeout=IDLETIMEOUT
-
The server will exit if there are no active connections
for the given amount of time (in seconds).
Use the value 0 to disable this timeout.
- --clipboard-filter-file=FILENAME
-
Name of a file containing regular expressions, any clipboard data
that matches one of these regular expressions will be dropped.
Note: at present this only applies to copying from the machine where
this option is used, not to it.
- --dpi=VALUE
-
The 'dots per inch' value that client applications should try to honour.
This numeric value should be in the range 10 to 500 to be useful.
Many applications will only read this value when starting up,
so connecting to an existing session started with a different DPI
value may not have the desired effect.
- --pixel-depth=VALUE
-
When starting a server, this switch controls the bits per pixel
of the virtual framebuffer. Possible values: 0 (auto), 16, 24, 30.
When starting a client, this switch controls the picture rendering
with the opengl backend: values higher than 24 will enable deep color,
the value 24 enables regular true color rendering. Use the value 0
to let the client decide if the rendering will benefit from using
deep color. (this is only supported on some Posix clients)
Other values should not be used.
- --cursors=yes|no
-
Enable or disable forwarding of custom application mouse cursors.
Client applications may change the mouse cursor at any time, which
will cause the new cursor's pixels to be sent to the client each time.
This disables the feature.
- --notifications=yes|no
-
Enable or disable forwarding of system notifications.
System notifications require the xpra server to have its own instance
of a dbus daemon, if it is missing a warning will be printed on
startup. This switch disables the feature entirely, and avoids
the warning.
- --input-method=METHOD
-
Specify which input method to configure.
This sets a number of environment variables which should be
honoured by applications started with the start-child option.
The following METHODs are currently supported:
-
- none
-
Disable input methods completely and prevent it from
interfering with keyboard input. This is the default.
- keep
-
Keeps the environment unchanged. You are responsible for ensuring
it is correct.
- xim
-
Enables the X Input Method.
- IBus
-
Enables the Intelligent Input Bus.
- SCIM
-
Enables the Smart Common Input Method.
- uim
-
Enables the Universal Input Method.
Any other value will also be set up, but will trigger a warning.
- --xsettings=yes|no
-
Enable or disable xsettings synchronization. Xsettings are only forwarded
from posix clients connecting to real posix servers (not shadows).
- --system-tray=yes|no
-
Enable or disable forwarding of system tray icons.
This feature requires client support and may not be available on all
platforms.
- --bell=yes|no
-
Enable or disable forwarding of the system bell.
- --webcam=yes|no
-
Enable or disable webcam forwarding.
- --mousewheel=on|off|invert|invert-x|invert-y|invert-z
-
Mouse wheel handling: can be used to disable mouse wheel forwarding
or to invert some or all axes.
- --remote-logging=yes|no|both
-
Allow the client to forward its log output to the server.
The client can specify the value both to both send
it to the server and keep it locally.
- --av-sync=yes|no
-
Enable or disable audio-video synchronization.
The video data will be delayed so that it is displayed in sync with the audio.
Note: this only applies to video regions, either auto-detected via the builtin
heuristics or specified using the dbus interface.
Options for attach
- --modal-windows=yes|no
-
Honour modal windows.
This may have undesirable side effects when multiple applications are
forwarded through the same xpra server: modal windows will be made modal
for all the applications forwarded by xpra rather than just the one
application which owns that window.
- --password-file=FILENAME
-
Supply the password to be used for connecting to a server that
uses authentication. See auth, tcp-auth, ssl-auth
and vsock-auth for details.
Alternatively, you may use the XPRA_PASSWORD environment variable.
- --opengl=(yes|no|auto)[:backend]
-
Use OpenGL accelerated rendering on the client.
The default is to detect if the graphics card and drivers are
supported (auto mode), but one can also disable OpenGL (no)
or force it enabled (yes).
On some platforms, it is also possible to specify which backends
should be used, only gtk and native are currently
supported and only on X11 platforms.
ie: opengl=yes:native, or opengl=auto:gtk,native.
- --webcam=yes|no|/dev/deviceXXX|DEVICEID
-
Enable or disable webcam forwarding.
The webcam device to use can also be specified.
-
-zLEVEL, --compress=LEVEL
Select the level of compression xpra will use when transmitting data
over the network.
With the lz4 and lzo compressors,
there are only two possible values:
0 (meaning no compression) and 1 (compression enabled).
The zlib compressor supports values between 0
(meaning no compression) and 9, inclusive. It should only be used
when lz4 and lzo are not available.
This compression is not used on pixel data (except
when using the rgb encoding).
- --quality=VALUE
-
This option sets a fixed image compression quality for lossy encodings
(jpeg, webp, h264/h265 and vp8/vp9).
First, one of those lossy encodings must be enabled with --encoding.
Values range from 1 (lowest quality, high compression - generally unusable)
to 100 (highest quality, low compression).
Specify a value of zero to let the system tune the quality dynamically
to achieve the best bandwidth usage possible.
It is usually best not to use this option and use min-quality instead.
- --min-quality=MIN-QUALITY
-
This option sets the minimum encoding quality allowed when the quality option is
set to automatic mode.
- --speed=SPEED
-
This option sets the encoding speed. Slower compresses more, faster
will give better latency.
The system normally uses a variable speed, this option forces
a fixed speed setting to be used instead.
It is usually best not to use this option and use min-speed instead.
- --min-speed=MIN-SPEED
-
This option sets the minimum encoding speed allowed when the speed option is
set to automatic mode.
- --auto-refresh-delay=DELAY
-
This option sets a delay after which the windows are automatically
refreshed using a lossless frame.
The delay is a floating-point number and is in seconds.
This option is enabled by default with a delay of 0.25 seconds.
This option is only relevant when using a lossy encoding.
- --shortcut-modifiers=MODIFIERS
-
Defines the default shortcut modifiers required by the key-shortcuts,
these modifiers can then be referred to as #.
The default value is 'auto' which evaluates to Meta+Shift on most
platforms.
- --key-shortcut=KEY:ACTION
-
Can be specified multiple times to add multiple key shortcuts.
These keys will be caught by the client and trigger the action specified
and the key presses will not be passed on to the server.
The KEY specification may include keyboard modifiers in the form
[modifier+]*key, for example: Shift+F10 or Shift+Control+B.
You can refer to the shorcut-modifers option value using #,
ie: #+F1.
If no shortcuts are defined on the command line,
the default builtin list will be used.
Some of the actions may allow arguments (ie: the log action does),
in which case they are specified in the usual programming style
syntax: ACTION(ARG1, ARG2, etc)
String arguments must be quoted (both single and double quotes are supported)
and numeric arguments must not be quoted.
Beware the the parenthesis and quotes must usually be escaped when
used from a shell command line.
Example: --key-shortcut=Meta+Shift+F7:log\(\'hello\'\)
The following ACTIONs are currently defined:
-
- quit
-
Disconnect the xpra client.
- log(MESSAGE)
-
Sends MESSAGE to the log.
- show_session_info[(TabName)]
-
Shows the session information window. The optional TabName
allows the information tab shown to be selected. Use the value
help to get the list of options.
- show_menu
-
Shows the menu normally found in the system tray.
- show_start_new_command
-
Shows the start new command dialog.
- magic_key
-
Placeholder which can be used by some client toolkits.
- void
-
Does not do anything, and can therefore be used to prevent
certain key combinations from ever being sent to the server.
- refresh_window
-
Force the currently focused window to be refreshed.
- refresh_all_windows
-
Force all windows to be refreshed.
- toggle_keyboard_grab
-
The keyboard will be grabbed / ungrabbed by the current window.
- toggle_pointer_grab
-
The pointer will be grabbed and confined to the current window.
- toggle_fullscreen
-
Make the current window fullscreen / unfullscreen.
- toggle_debug
-
Turn debugging on or off.
- scaleup
-
Increase the current value of desktop-scaling.
- scaledown
-
Decrease the current value of desktop-scaling.
- scalereset
-
Reset the desktop-scaling to its original value.
- scalingoff
-
Turn off desktop-scaling.
- increase_quality
-
Increase the min-quality or quality setting
(whichever one is currently in use).
- decrease_quality
-
Decrease the min-quality or quality setting
(whichever one is currently in use).
- increase_speed
-
Increase the min-speed or speed setting
(whichever one is currently in use).
- decrease_speed
-
Decrease the min-speed or speed setting
(whichever one is currently in use).
- --sharing=yes|no|auto
-
Sharing allows more than one client to connect to the same session.
This must be enabled on both the server and all co-operating clients
to function.
When used server-side, the default value auto allows the clients
to decide if they are willing to share the session.
When used client-side, the default value auto evaluates to no.
To allow sharing to work with unix domain sockets (either using local
connections or via ssh), you should create at least one socket in a group
accessible directory. On Posix with a default configuration, being a
member of the xpra group should be enough to create a socket
in /run/xpra. You must also ensure that the permissions of this
socket file allow group access, see socket-permissions.
- --lock=yes|no|auto
-
Locking allows a client to refuse to hand over the session to a new client.
The session may still be shared with multiple clients (see the sharing option),
but otherwise the server will reject new clients.
When used server-side, the default value auto allows the clients
to decide if they want to lock the session.
When used client-side, the default value auto evaluates to no.
- --keyboard-sync=yes|no
-
Normally the key presses and key release events are sent to the server
as they occur so that the server can maintain a consistent keyboard state.
Disabling synchronization can prevent keys from repeating unexpectedly on
high latency links but it may also disrupt applications which access
the keyboard directly (games, etc.).
- --keyboard-raw=yes|no
-
Tells the server to process all keyboard input untranslated.
Both the client and the server must be using the same type of keyboard
interface. (ie: both using X11)
- --keyboard-layout=LAYOUTSTRING
-
The keyboard layout is normally detected automatically.
This option overrides it.
- --keyboard-layouts=LAYOUTS
-
The list of keyboard layouts to enable.
- --keyboard-variant=VARIANT
-
Override for the keyboard layout variant.
- --keyboard-variants=VARIANTS
-
Override for the keyboard layout variants.
- --keyboard-options=OPTIONS
-
Override for the keyboard options sent to the server.
- --swap-keys=YES|NO
-
This option only applies to MacOS clients, it swaps
the command and control keys and is enabled by default.
- --sound-source=PLUGIN
-
Specifies the GStreamer sound plugin used for capturing the sound stream.
This affects "speaker forwarding" on the server, and "microphone" forwarding
on the client.
To get a list of options use the special value 'help'.
It is also possible to specify plugin options using the form:
--sound-source=
pulsedevice=device.alsa_input.pci-0000_00_14.2.analog-stereo
- --speaker=on|off|disabled and --microphone=on|off|disabled|on:DEVICE|off:DEVICE
-
Sound input and output forwarding support: on will start the forwarding
as soon as the connection is established, off will require
the user to enable it via the menu, disabled will
prevent it from being used and the menu entry will be disabled.
With microphone forwarding, you may also be able to specify which
device to use.
- --speaker-codec=CODEC and --microphone-codec=CODEC
-
Specify the codec(s) to use for sound output (speaker) or input (microphone).
This parameter can be specified multiple times and the order in which the codecs
are specified defines the preferred codec order.
Use the special value 'help' to get a list of options.
When unspecified, all the available codecs are allowed and the first one is used.
- --title=VALUE
-
Sets the text shown as window title.
The string supplied can make use of remote metadata placeholders
which will be populated at runtime with the values from the
remote server.
The default value used is "@title@ on @client-machine@".
The following placeholders are defined:
-
- @title@
-
Will be replaced by the remote window's title.
- @client-machine@
-
Will be replaced by the hostname of the system where the application is running,
if provided, the xpra server's hostname otherwise.
- @server-machine@
-
Will be replaced by the hostname of the xpra server.
- @server-display@
-
Will be replaced by the name of the display on which the application is running.
- --border=BORDER
-
Specifies the color and size of the border to draw inside every xpra window.
This can be used to easily distinguish xpra windows running on remote hosts
from local windows.
The BORDER can be specified using standard color names (ie: red,
or orange) or using the web hexadecimal syntax (ie: #F00 or
#FF8C00). The special color name "auto" will derive the color
from the server target address (the connection string) so that connecting
to the same target should always give the same color.
You may also specify the size of the border in pixels, ie:
--border=yellow,10.
- --window-icon=FILENAME
-
Path to the default image which will be used for all windows.
This icon may be shown in the window's bar, its iconified
state or task switchers. This depends on the operating system,
the window manage and the application may override this too.
- --window-close=ACTION
-
Choose what action to take when the window is closed by the client.
The following actions can be used:
-
- auto
-
The client will figure out what is best based on the window type.
This is the default.
ie: it will use disconnect shadow sessions, Iforward
for seamless windows.
- forward
-
The event will be forwarded to the server.
- ignore
-
Do nothing.
- disconnect
-
Disconnect from the server.
- shutdown
-
Shutdown the server.
- --desktop-scaling=off|on|auto|VALUE
-
Desktop scaling allows the windows to be scaled
by the client.
Downscaling will mostly waste bandwidth, upscaling allows the window's
pixels to be sent over the wire at a lower resolution,
saving bandwidth and CPU time.
This option can also be used to request a specific scaling value.
For best results, use opengl client rendering, the other
display backends may show visual artifacts when scaling.
Note: the scaling may also be adjusted at runtime
through keyboard shortcuts if those are configured.
The desktop-scaling value can take the form:
-
- off
-
scaling will be disabled
- on
-
scaling will be allowed, but it will start unscaled
- auto
-
scaling will be allowed and a scaling value will be automatically
chosen if the client's desktop is large (bigger desktops will
use higher scaling values)
- scaling-value
-
scaling will be enabled and use the given value, specified as a number,
fraction or percentage. ie: 2, 3/2 or 150%.
- pair
-
the scaling will be enabled and use a different value for the X and Y axis. ie: 3x2 or 3/2x4/3
- desktop-size
-
the scaling will be enabled and the server will render to the given size. ie: 1600x1200
--tray=yes|no
Enable or disable the system tray. Not available on OSX since the dock
icon is always shown.
- --delay-tray
-
Waits for the first window or notification to appear before
showing the system tray. (posix only)
- --tray-icon=FILENAME
-
Specifies the icon shown in the dock/tray.
By default it uses a simple default 'xpra' icon.
(On Microsoft Windows, the icon must be in ico format.)
- --enable-pings
-
The client and server will exchange ping and echo packets
which are used to gather latency statistics.
Those statistics can be seen using the xpra info command.
Options for attach, stop, info, screenshot, version
- --ssh=CMD
-
When you use an ssh: address to connect to a remote display,
xpra runs ssh(1) to make the underlying connection. By default,
it does this by running the command "ssh". If your ssh program is in
an unusual location, has an unusual name, or you want to pass special
options to change ssh's behavior, then you can use the --ssh
switch to tell xpra how to run ssh.
For example, if you want to use arcfour encryption, then you should run
-
-
xpra attach --ssh="ssh -c arcfour" ssh://frodo/7
Note: Don't bother to enable ssh compression; this
is redundant with xpra's own compression, and will just waste your
CPU. See also xpra's --compress switch.
On MS Windows, where backslashes are used to separate path elements
and where spaces are often used as part of paths, you need to add
quotes around paths. (ie: ssh="C:\Program Files\Xpra\Plink.exe" -ssh -agent)
- --exit-ssh=yes|no
-
Choose whether the SSH client process should be forcibly terminated
when xpra disconnects from the server.
If you are using SSH connection sharing, you may want to avoid
stopping the SSH master process instance spawned by xpra as it may be
used by other SSH sessions.
Note: the exit-ssh=no detaches the SSH process from the
terminal which prevents the SSH process from interacting with
the terminal input, this disables the keyboard interaction required
for password input, host key verification, etc..
- --remote-xpra=CMD
-
When connecting to a remote server over ssh, xpra needs to be able to
find and run the xpra executable on the remote host. If this
executable is in a non-standard location, or requires special
environment variables to be set before it can run, then accomplishing
this may be non-trivial. If running xpra attach ssh:something
fails because it cannot find the remote xpra, then you can use this
option to specify how to run xpra on the remote host.
That said, this option should not be needed in normal usage, as xpra
tries quite hard to work around the above problems. If you find
yourself needing it often, then that may indicate a bug that we would
appreciate hearing about.
SSL Options
- --ssl=on|auto|off|tcp|www
-
Whether to enable SSL on TCP sockets and for what purpose.
The TCP sockets will automatically be upgraded to SSL when SSL
packets are received.
-
- auto
-
The server will try to guess what protocol to use for each new
SSL connection: either xpra's native protocol or https / websocket (wss)
- tcp
-
The SSL sockets will only be used for xpra's native protocol
- www
-
The SSL sockets will only be used for https and websocket (wss)
If SSL is enabled, then a ssl-cert is required.
Authentication, if required, will use the ssl-auth module specified,
and fallback to tcp-auth or auth unless the value
none is specified.
The remaining options mirror the Python ssl module attributes.
Please refer to that documentation and bear in mind that configuring
SSL for security is not trivial, and definitely not just a matter of
enabling SSL. See:
https://docs.python.org/2/library/ssl.html
Some options may not be available with older versions of Python.
Summary:
--ssl-key=KEYFILE
The key file to use.
- --ssl-cert=ERTFILEORDIR
-
Certificate file, required for server SSL support.
- --ssl-protocol=PROTOCOLVERSION
-
Specifies which version of the SSL protocol to use.
- --ssl-ca-certs=CACERTSFILE
-
The ca_certs file contains a set of concatenated 'certification
authority' certificates. If a directory is specified, it should contain
the certificates.
- --ssl-ca-data=ERTDATA
-
Certificate data.
- --ssl-ciphers=CIPHERS
-
Sets the available ciphers, it should be a string in the OpenSSL cipher list format.
- --ssl-client-verify-mode=none|optional|required
-
Whether to try to verify the client's certificates and how to behave if verification fails.
- --ssl-server-verify-mode=none|optional|required
-
Whether to try to verify the server's certificates and how to behave if verification fails.
- --ssl-verify-flags=FLAGS
-
The flags for certificate verification operations.
- --ssl-check-hostname=yes|no
-
Whether to match the peer cert's hostname.
- --ssl-options=options
-
Set of SSL options enabled on this context.
-
ENVIRONMENT
- DISPLAY
-
xpra start --start-child=... sets this variable in the
environment of the child to point to the xpra display.
xpra attach, on the other hand, uses this variable to determine
which display the remote applications should be shown on.
fIXPRA_PASSWORD may be used with xpra attach instead of the
password-file option.
FILES
xpra.conf stores default values for most options.
There is a global configuration file in /etc or /usr/local/etc,
and each user may override those defaults by creating the file .xpra/xpra.conf.
You can also split the options into multiple files by placing them
in a conf.d directory with the .conf extension.
Depending on OS and version,
xpra uses the directory ~/.xpra or /run/<uid>/xpra
to store a number of files.
(The examples below are given for the display :7.)
- ~/.xpra/:7
-
The unix domain socket that clients use to contact the xpra server,
if the system configuration uses this directory.
- ~/.xpra/:7.log
-
When run in daemon mode (the default), the xpra server directs all
output to this file. This includes all debugging output, if debugging
is enabled.
- ~/.xpra/run-xpra
-
A shell script that, when run, starts up xpra with the correct python
interpreter, PYTHONPATH, PATH, location of the main xpra script, etc.
Automatically generated by xpra initenv, xpra start
and used by xpra attach (see also the discussion of
--remote-xpra).
BUGS
Xpra has no test suite.
Xpra does not fully handle all aspects of the X protocol; for
instance, fancy input features like pressure-sensitivity on tablets,
some window manager hints, and probably other more obscure parts of the
X protocol. It does, however, degrade gracefully, and patches for each
feature would be gratefully accepted.
The xpra server allocates an over-large framebuffer when using Xvfb;
this wastes memory.
If the Xvfb does not support RandR this can also cause applications
to misbehave (e.g. by letting menus go off-screen). This is not a
problem when using Xdummy, see the --xvfb= switch for details.
Conversely, if the framebuffer is ever insufficiently large,
clients will misbehave in other ways (e.g., input events will be
misdirected).
REPORTING BUGS
Send any questions or bugs reports to http://xpra.org/trac/
SEE ALSO
screen(1),
winswitch_applet(1)
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- CONNECTION STRINGS
-
- :DISPLAY
-
- tcp://[USERNAME@]HOST:PORT[/DISPLAY]
-
- ssl://[USERNAME@]HOST:PORT[/DISPLAY]
-
- vsock://[USERNAME[:PASSWORD]@]HOST:PORT
-
- ws://[USERNAME[:PASSWORD]@]HOST:PORT/[DISPLAY]
-
- wss://[USERNAME[:PASSWORD]@]HOST:PORT/[DISPLAY]
-
- ssh://[USERNAME[:PASSWORD]@]HOST[:SSH_PORT]/[DISPLAY][?QUERYSTRING]
-
- EXAMPLES
-
- DISPLAYS
-
- SUBCOMMANDS
-
- xpra start
-
- xpra start-desktop
-
- xpra attach
-
- xpra detach
-
- xpra screenshot
-
- xpra version
-
- xpra info
-
- xpra top
-
- xpra control
-
- xpra initenv
-
- xpra stop
-
- xpra exit
-
- xpra showconfig
-
- xpra list
-
- xpra upgrade
-
- xpra upgrade-desktop
-
- xpra shadow
-
- xpra proxy
-
- Important Note
-
- OPTIONS
-
- General options
-
- Options for start, start-desktop, upgrade, proxy and shadow
-
- Options for start, start-desktop, upgrade
-
- Options for start, start-desktop, upgrade, shadow
-
- Options for start, start-desktop, upgrade and attach
-
- Options for attach
-
- Options for attach, stop, info, screenshot, version
-
- SSL Options
-
- ENVIRONMENT
-
- FILES
-
- BUGS
-
- REPORTING BUGS
-
- SEE ALSO
-
This document was created by
man2html,
using the manual pages.
Time: 06:02:39 GMT, April 25, 2024