ARPTABLES
Section: Maintenance Commands (8)
Updated: March 2019
Index
Return to Main Contents
NAME
arptables - ARP table administration (nft-based)
SYNOPSIS
arptables [-t table] -[AD] chain rule-specification [options]
arptables [-t table] -[RI] chain rulenum rule-specification [options]
arptables [-t table] -D chain rulenum [options]
arptables [-t table] -[LFZ] [chain] [options]
arptables [-t table] -[NX] chain
arptables [-t table] -E old-chain-name new-chain-name
arptables [-t table] -P chain target [options]
DESCRIPTION
arptables
is a user space tool, it is used to set up and maintain the
tables of ARP rules in the Linux kernel. These rules inspect
the ARP frames which they see.
arptables
is analogous to the
iptables
user space tool, but
arptables
is less complicated.
CHAINS
The kernel table is used to divide functionality into
different sets of rules. Each set of rules is called a chain.
Each chain is an ordered list of rules that can match ARP frames. If a
rule matches an ARP frame, then a processing specification tells
what to do with that matching frame. The processing specification is
called a 'target'. However, if the frame does not match the current
rule in the chain, then the next rule in the chain is examined and so forth.
The user can create new (user-defined) chains which can be used as the 'target' of a rule.
TARGETS
A firewall rule specifies criteria for an ARP frame and a frame
processing specification called a target. When a frame matches a rule,
then the next action performed by the kernel is specified by the target.
The target can be one of these values:
ACCEPT,
DROP,
CONTINUE,
RETURN,
an 'extension' (see below) or a user-defined chain.
ACCEPT
means to let the frame through.
DROP
means the frame has to be dropped.
CONTINUE
means the next rule has to be checked. This can be handy to know how many
frames pass a certain point in the chain or to log those frames.
RETURN
means stop traversing this chain and resume at the next rule in the
previous (calling) chain.
For the extension targets please see the
TARGET EXTENSIONS
section of this man page.
TABLES
There is only one ARP table in the Linux
kernel. The table is
filter.
You can drop the '-t filter' argument to the arptables command.
The -t argument must be the
first argument on the arptables command line, if used.
- -t, --table
-
filter,
is the only table and contains two built-in chains:
INPUT
(for frames destined for the host) and
OUTPUT
(for locally-generated frames).
ARPTABLES COMMAND LINE ARGUMENTS
After the initial arptables command line argument, the remaining
arguments can be divided into several different groups. These groups
are commands, miscellaneous commands, rule-specifications, match-extensions,
and watcher-extensions.
COMMANDS
The arptables command arguments specify the actions to perform on the table
defined with the -t argument. If you do not use the -t argument to name
a table, the commands apply to the default filter table.
With the exception of the
-Z
command, only one command may be used on the command line at a time.
- -A, --append
-
Append a rule to the end of the selected chain.
- -D, --delete
-
Delete the specified rule from the selected chain. There are two ways to
use this command. The first is by specifying an interval of rule numbers
to delete, syntax: start_nr[:end_nr]. Using negative numbers is allowed, for more
details about using negative numbers, see the -I command. The second usage is by
specifying the complete rule as it would have been specified when it was added.
- -I, --insert
-
Insert the specified rule into the selected chain at the specified rule number.
If the current number of rules equals N, then the specified number can be
between -N and N+1. For a positive number i, it holds that i and i-N-1 specify the
same place in the chain where the rule should be inserted. The number 0 specifies
the place past the last rule in the chain and using this number is therefore
equivalent with using the -A command.
- -R, --replace
-
Replaces the specified rule into the selected chain at the specified rule number.
If the current number of rules equals N, then the specified number can be
between 1 and N. i specifies the place in the chain where the rule should be replaced.
- -P, --policy
-
Set the policy for the chain to the given target. The policy can be
ACCEPT, DROP or RETURN.
- -F, --flush
-
Flush the selected chain. If no chain is selected, then every chain will be
flushed. Flushing the chain does not change the policy of the
chain, however.
- -Z, --zero
-
Set the counters of the selected chain to zero. If no chain is selected, all the counters
are set to zero. The
-Z
command can be used in conjunction with the
-L
command.
When both the
-Z
and
-L
commands are used together in this way, the rule counters are printed on the screen
before they are set to zero.
- -L, --list
-
List all rules in the selected chain. If no chain is selected, all chains
are listed.
- -N, --new-chain
-
Create a new user-defined chain with the given name. The number of
user-defined chains is unlimited. A user-defined chain name has maximum
length of 31 characters.
- -X, --delete-chain
-
Delete the specified user-defined chain. There must be no remaining references
to the specified chain, otherwise
arptables
will refuse to delete it. If no chain is specified, all user-defined
chains that aren't referenced will be removed.
- -E, --rename-chain
-
Rename the specified chain to a new name. Besides renaming a user-defined
chain, you may rename a standard chain name to a name that suits your
taste. For example, if you like PREBRIDGING more than PREROUTING,
then you can use the -E command to rename the PREROUTING chain. If you do
rename one of the standard
arptables
chain names, please be sure to mention
this fact should you post a question on the
arptables
mailing lists.
It would be wise to use the standard name in your post. Renaming a standard
arptables
chain in this fashion has no effect on the structure or function
of the
arptables
kernel table.
MISCELLANOUS COMMANDS
- -V, --version
-
Show the version of the arptables userspace program.
- -h, --help
-
Give a brief description of the command syntax.
- -j, --jump target
-
The target of the rule. This is one of the following values:
ACCEPT,
DROP,
CONTINUE,
RETURN,
a target extension (see
TARGET EXTENSIONS)
or a user-defined chain name.
- -c, --set-counters PKTS BYTES
-
This enables the administrator to initialize the packet and byte
counters of a rule (during
INSERT,
APPEND,
REPLACE
operations).
RULE-SPECIFICATIONS
The following command line arguments make up a rule specification (as used
in the add and delete commands). A "!" option before the specification
inverts the test for that specification. Apart from these standard rule
specifications there are some other command line arguments of interest.
- -s, --source-ip [!] address[/mask]
-
The Source IP specification.
- -d, --destination-ip [!] address[/mask]
-
The Destination IP specification.
- --source-mac [!] address[/mask]
-
The source mac address. Both mask and address are written as 6 hexadecimal
numbers separated by colons.
- --destination-mac [!] address[/mask]
-
The destination mac address. Both mask and address are written as 6 hexadecimal
numbers separated by colons.
- -i, --in-interface [!] name
-
The interface via which a frame is received (for the
INPUT
chain). The flag
--in-if
is an alias for this option.
- -o, --out-interface [!] name
-
The interface via which a frame is going to be sent (for the
OUTPUT
chain). The flag
--out-if
is an alias for this option.
- -l, --h-length length[/mask]
-
The hardware length (nr of bytes)
- --opcode code[/mask]
-
The operation code (2 bytes). Available values are:
1=Request
2=Reply
3=Request_Reverse
4=Reply_Reverse
5=DRARP_Request
6=DRARP_Reply
7=DRARP_Error
8=InARP_Request
9=ARP_NAK.
- --h-type type[/mask]
-
The hardware type (2 bytes, hexadecimal). Available values are:
1=Ethernet.
- --proto-type type[/mask]
-
The protocol type (2 bytes). Available values are:
0x800=IPv4.
TARGET-EXTENSIONS
arptables
extensions are precompiled into the userspace tool. So there is no need
to explicitly load them with a -m option like in
iptables.
However, these
extensions deal with functionality supported by supplemental kernel modules.
mangle
- --mangle-ip-s IP address
-
Mangles Source IP Address to given value.
- --mangle-ip-d IP address
-
Mangles Destination IP Address to given value.
- --mangle-mac-s MAC address
-
Mangles Source MAC Address to given value.
- --mangle-mac-d MAC address
-
Mangles Destination MAC Address to given value.
- --mangle-target target
-
Target of ARP mangle operation
(DROP, CONTINUE or ACCEPT -- default is ACCEPT).
CLASSIFY
This module allows you to set the skb->priority value (and thus clas-
sify the packet into a specific CBQ class).
- --set-class major:minor
-
Set the major and minor class value. The values are always
interpreted as hexadecimal even if no 0x prefix is given.
MARK
This module allows you to set the skb->mark value (and thus classify
the packet by the mark in u32)
- --set-mark mark
-
Set the mark value. The values are always
interpreted as hexadecimal even if no 0x prefix is given
- --and-mark mark
-
Binary AND the mark with bits.
- --or-mark mark
-
Binary OR the mark with bits.
NOTES
In this nft-based version of
arptables,
support for
FORWARD
chain has not been implemented. Since ARP packets are "forwarded" only by Linux
bridges, the same may be achieved using
FORWARD
chain in
ebtables.
MAILINGLISTS
See http://netfilter.org/mailinglists.html
SEE ALSO
xtables-nft(8), iptables(8), ebtables(8), ip(8)
See https://wiki.nftables.org
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- CHAINS
-
- TARGETS
-
- TABLES
-
- ARPTABLES COMMAND LINE ARGUMENTS
-
- COMMANDS
-
- MISCELLANOUS COMMANDS
-
- RULE-SPECIFICATIONS
-
- TARGET-EXTENSIONS
-
- mangle
-
- CLASSIFY
-
- MARK
-
- NOTES
-
- MAILINGLISTS
-
- SEE ALSO
-
This document was created by
man2html,
using the manual pages.
Time: 15:13:52 GMT, April 19, 2024