GDB
Section: GNU Development Tools (1)
Updated: 2023-02-19
Index
Return to Main Contents
NAME
gdb - The GNU Debugger
SYNOPSIS
gdb [OPTIONS] [prog|prog procID|prog core]
DESCRIPTION
The purpose of a debugger such as GDB is to allow you to see what is
going on ``inside'' another program while it executes --- or what another
program was doing at the moment it crashed.
GDB can do four main kinds of things (plus other things in support of
these) to help you catch bugs in the act:
- •
-
Start your program, specifying anything that might affect its behavior.
- •
-
Make your program stop on specified conditions.
- •
-
Examine what has happened, when your program has stopped.
- •
-
Change things in your program, so you can experiment with correcting the
effects of one bug and go on to learn about another.
You can use GDB to debug programs written in C, C++, Fortran and
Modula-2.
GDB is invoked with the shell command "gdb". Once started, it reads
commands from the terminal until you tell it to exit with the GDB
command "quit" or "exit". You can get online help from GDB itself
by using the command "help".
You can run "gdb" with no arguments or options; but the most
usual way to start GDB is with one argument or two, specifying an
executable program as the argument:
gdb program
You can also start with both an executable program and a core file specified:
gdb program core
You can, instead, specify a process ID as a second argument or use option
"-p", if you want to debug a running process:
gdb program 1234
gdb -p 1234
would attach GDB to process 1234. With option -p you
can omit the program filename.
Here are some of the most frequently needed GDB commands:
- break [file:][function|line]
-
Set a breakpoint at function or line (in file).
- run [arglist]
-
Start your program (with arglist, if specified).
- bt
-
Backtrace: display the program stack.
- print expr
-
Display the value of an expression.
- c
-
Continue running your program (after stopping, e.g. at a breakpoint).
- next
-
Execute next program line (after stopping); step over any
function calls in the line.
- edit [file:]function
-
look at the program line where it is presently stopped.
- list [file:]function
-
type the text of the program in the vicinity of where it is presently stopped.
- step
-
Execute next program line (after stopping); step into any
function calls in the line.
- help [name]
-
Show information about GDB command name, or general information
about using GDB.
- quit
-
- exit
-
Exit from GDB.
For full details on GDB,
see Using GDB: A Guide to the GNU Source-Level Debugger,
by Richard M. Stallman and Roland H. Pesch. The same text is available online
as the "gdb" entry in the "info" program.
OPTIONS
Any arguments other than options specify an executable
file and core file (or process ID); that is, the first argument
encountered with no
associated option flag is equivalent to a --se option, and the second,
if any, is equivalent to a -c option if it's the name of a file.
Many options have
both long and abbreviated forms; both are shown here. The long forms are also
recognized if you truncate them, so long as enough of the option is
present to be unambiguous.
The abbreviated forms are shown here with - and long forms are shown
with -- to reflect how they are shown in --help. However,
GDB recognizes all of the following conventions for most options:
- "--option=value"
-
- "--option value"
-
- "-option=value"
-
- "-option value"
-
- "--o=value"
-
- "--o value"
-
- "-o=value"
-
- "-o value"
-
All the options and command line arguments you give are processed
in sequential order. The order makes a difference when the -x
option is used.
- --help
-
- -h
-
List all options, with brief explanations.
- --symbols=file
-
- -s file
-
Read symbol table from file.
- --write
-
Enable writing into executable and core files.
- --exec=file
-
- -e file
-
Use file as the executable file to execute when
appropriate, and for examining pure data in conjunction with a core
dump.
- --se=file
-
Read symbol table from file and use it as the executable
file.
- --core=file
-
- -c file
-
Use file as a core dump to examine.
- --command=file
-
- -x file
-
Execute GDB commands from file.
- --eval-command=command
-
- -ex command
-
Execute given GDB command.
- --init-eval-command=command
-
- -iex
-
Execute GDB command before loading the inferior.
- --directory=directory
-
- -d directory
-
Add directory to the path to search for source files.
- --nh
-
Do not execute commands from ~/.config/gdb/gdbinit,
~/.gdbinit, ~/.config/gdb/gdbearlyinit, or
~/.gdbearlyinit
- --nx
-
- -n
-
Do not execute commands from any .gdbinit or
.gdbearlyinit initialization files.
- --quiet
-
- --silent
-
- -q
-
``Quiet''. Do not print the introductory and copyright messages. These
messages are also suppressed in batch mode.
- --batch
-
Run in batch mode. Exit with status 0 after processing all the command
files specified with -x (and .gdbinit, if not inhibited).
Exit with nonzero status if an error occurs in executing the GDB
commands in the command files.
Batch mode may be useful for running GDB as a filter, for example to
download and run a program on another computer; in order to make this
more useful, the message
Program exited normally.
(which is ordinarily issued whenever a program running under GDB control
terminates) is not issued when running in batch mode.
- --batch-silent
-
Run in batch mode, just like --batch, but totally silent. All GDB
output is supressed (stderr is unaffected). This is much quieter than
--silent and would be useless for an interactive session.
This is particularly useful when using targets that give Loading section
messages, for example.
Note that targets that give their output via GDB, as opposed to writing
directly to "stdout", will also be made silent.
- --args prog [arglist]
-
Change interpretation of command line so that arguments following this
option are passed as arguments to the inferior. As an example, take
the following command:
gdb ./a.out -q
It would start GDB with -q, not printing the introductory message. On
the other hand, using:
gdb --args ./a.out -q
starts GDB with the introductory message, and passes the option to the inferior.
- --pid=pid
-
Attach GDB to an already running program, with the PID pid.
- --tui
-
Open the terminal user interface.
- --readnow
-
Read all symbols from the given symfile on the first access.
- --readnever
-
Do not read symbol files.
- --return-child-result
-
GDB's exit code will be the same as the child's exit code.
- --configuration
-
Print details about GDB configuration and then exit.
- --version
-
Print version information and then exit.
- --cd=directory
-
Run GDB using directory as its working directory,
instead of the current directory.
- --data-directory=directory
-
- -D
-
Run GDB using directory as its data directory. The data
directory is where GDB searches for its auxiliary files.
- --fullname
-
- -f
-
Emacs sets this option when it runs GDB as a subprocess. It tells
GDB to output the full file name and line number in a standard,
recognizable fashion each time a stack frame is displayed (which
includes each time the program stops). This recognizable format looks
like two \032 characters, followed by the file name, line number
and character position separated by colons, and a newline. The
Emacs-to-GDB interface program uses the two \032
characters as a signal to display the source code for the frame.
- -b baudrate
-
Set the line speed (baud rate or bits per second) of any serial
interface used by GDB for remote debugging.
- -l timeout
-
Set timeout, in seconds, for remote debugging.
- --tty=device
-
Run using device for your program's standard input and output.
SEE ALSO
The full documentation for GDB is maintained as a Texinfo manual.
If the "info" and "gdb" programs and GDB's Texinfo
documentation are properly installed at your site, the command
info gdb
should give you access to the complete manual.
Using GDB: A Guide to the GNU Source-Level Debugger,
Richard M. Stallman and Roland H. Pesch, July 1991.
COPYRIGHT
Copyright (c) 1988-2023 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being ``Free Software'' and ``Free Software Needs
Free Documentation'', with the Front-Cover Texts being ``A GNU Manual,''
and with the Back-Cover Texts as in (a) below.
(a) The FSF's Back-Cover Text is: ``You are free to copy and modify
this GNU Manual. Buying copies from GNU Press supports the FSF in
developing GNU and promoting software freedom.''
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- OPTIONS
-
- SEE ALSO
-
- COPYRIGHT
-
This document was created by
man2html,
using the manual pages.
Time: 12:55:14 GMT, April 27, 2024