Copyright © 2006 Jaime E. Villate
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Xmaxima is a graphical interface for Maxima, written in Tcl/Tk. It also provides the xmaxima plotting program for Maxima (formerly called ’openmath’), which can do some of the plots done by Maxima’s default plotter (gnuplot) and a few more that gnuplot cannot do.
This manual was written for Xmaxima - the screenshots are from the Linux version of Maxima 5.43.2. Some familiarity with Maxima is assumed. There is a separate reference manual for Maxima, which can be browsed and studied from Xmaxima.
1 Command-line options | ||
2 Xmaxima Window | ||
3 Entering commands | ||
4 Session control | ||
5 Xmaxima plots | ||
6 The browser | ||
7 Getting Help | ||
Concept Index |
The executable program, xmaxima, accepts the following command-line options:
--help
-h
Displays a brief usage summary.
--url
siteStart Xmaxima’s browser with the page at the URL ‘site’
--use-version
ver-u
verLaunch version ‘ver’ of Maxima.
--lisp
flavor-l
flavorUse the lisp implementation ‘flavor’ of Maxima.
--lisp-options
lisp-options-X
lisp-optionsOptions to be given to the underlying Lisp. Option lines containing spaces have to be quoted to be passed to the lisp as a whole.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
By default, Xmaxima creates two windows, a command window, where all the commands for Maxima will be entered and the output returned by Maxima will be printed.
The second window is Xmaxima’s browser; it is used to show a quick primer, a copy of the Maxima manual and any other HTML you might want to download from the Web.
The cursor is the small vertical bar that blinks in the text window. The text that is currently being written in the text window and which could be submitted to Maxima for evaluation is rendered in green. The text sent back by Maxima is rendered in black, and the text that has been previously entered by the user and that was already evaluated by Maxima is rendered in blue.
You can also choose different types and sizes for the fonts, in the
section ‘Preferences’ of the Options
menu; those settings
will be saved for future sessions.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Most commonly, you will enter Maxima commands in the last input line that appears on the text Window. That text will be rendered in green. If you press enter, without having written a command-termination character (either ‘;’ or ‘$’) at the end, the text will remain green and you can continue to write a multi-line command. When you type a command-end character and press the enter key, the text will become blue and a response from Maxima should appear in black. You can also use the key combination Ctrl-j to move to a new line without sending the input for Maxima evaluation yet. If you want to clear all the current input (in green), even if it spans several lines, use the key combination Ctrl-u.
If you move the cursor over the (%i1)
input label, or any other
label or output text (in black), you will not be able to type any text
there; that feature will prevent you from trying to enter a command in
the wrong place, by mistake. If you really want to insert some
additional text to modify Maxima’s output, and which will not be
interpreted by Maxima, you can do that using cut and paste (we will
cover that later).
You can also write a new input command for Maxima on top of a previous input line (in blue), for instance, if you do not want to write down again everything but just want to make a slight change. Once you press the enter key, the text you modified will appear at the last input line, as if you had written it down there; the input line you modified will continue the same in Xmaxima’s and Maxima’s memory, in spite of having changed in the screen.
For example, suppose you entered ‘a: 45;’ in input line
(%i1)
, and something else in (%i2)
. You then move up over
the (%i1) a: 45;
and change the 5 for an 8. Once you press enter,
you will have in the screen (%i1) a: 48;
and (%i3) a: 48;
.
But if you write, in the current input line, (%i1)
the original
input ‘a: 45;’ will reappear. If you navigate through the input
lines history (see next section), you will also see that the first input
keeps its original value.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
When the cursor is at the end of the last (%i)
label, you can use
the key combinations Alt-p and Alt-n to recover the previous
or next command that you entered. If you have just pressed Alt-n,
the ‘next’ command means the first one you entered; but if you
press it again it will mean the second one and so on.
In the same way, if you press Alt-p repeatedly, until you reached the first input, it will then continue to the last command you entered. Once you get on the screen the command that you were looking for, it will appear in green, as if you would have just type it, and you can modify it before you press enter.
Those two key combinations can also be used to search for a previous input line with a particular string in it. You first write down the string to search, and then press Alt-p, to search backwards, or Alt-n to search forward. Pressing those key combinations repeatedly will allow you to cycle through all the lines that contain the string. If you want to try a different string in the middle of the search, you can delete the current input, type the new string, and start the search again.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
You can cut or copy a piece of text that you select, from anywhere on text window; not just from the input lines but also from the output text in black.
To select the text, you can drag the cursor with the mouse while you keep its left button depressed, or you can hold the shift key with one finger, while you move the cursor with the mouse or with the arrow keys.
Once you have selected the text, you can either cut it, with
Ctrl-x, or copy it to an internal buffer, with
Ctrl-c. Instead of those key combinations, you can also use two
options that appear inside the Edit
menu.
The text that has been cut or copied more recently can be pasted
anywhere, even in the output fields, using Ctrl-v or an option in
the Edit
menu.
There is a command similar to ‘cut’, called ‘kill’ (Ctrl-k, with two major differences: it only works in input fields (blue or green) and instead of cutting a text that was selected, it will cut all the text from the cursor until the end of the input line where the cursor is. The command ‘Clear input’ (Ctrl-u) is similar to ‘kill’, but it will cut the whole input line.
To paste the last text that you have cut with either ‘kill’ or
‘clear input’, you should use the ‘yank’ command,
Ctrl-y. If you prefer, you can use entries in the Edit
menu to kill, clear input and yank.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
There are other useful key combinations, which are not particular to Xmaxima, but are defined in most Tcl/Tk programs:
The same as the right arrow key.
The same as the left arrow key.
The same as the up arrow key.
The same as the down arrow key.
Moves to the first character in a line (either input or output)
Moves to the last character in a line (either input or output)
Moves one page up
Moves one page down
Moves the first character in the text window.
Moves to the last character in the text window.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The File
menu has sections to manage the work session in
Xmaxima. The ‘Batch file’ and ‘Batch file silently’ sections
are equivalent to Maxima’s commands batch
and
batchload
, which can also be used in Xmaxima. The advantage of
those two options is that they will open a dialog box that will allow
you to navigate through your directories, until you find the one that
you are looking for.
The ‘Restore Maxima State’ (Alt-i) section allows you to
reload the state of a Maxima session that you saved using the ‘Save
Maxima State to File’ section. The latter saves the state as a Lisp file
using Maxima’s save
command.
The ‘Save Maxima Input to File’ (Ctrl-a) section saves each
input line as Maxima code using the Maxima stringout
command. This code can be manually edited in a text editor and loaded
into Xmaxima using ‘Batch file’.
In the menu Edit
there is also an option ‘Save console to
file’ which will save the complete contents of the text window into a
file. The input and output will be saved as they look on the screen, and
not as they were originally written.
The option ‘Input prompt’ (Alt-s) will repeat the last input label sent back by Maxima. That will be useful if you are working on a text that is not near the last input label and you want to move quickly to the last input.
Option ‘Interrupt’ (Alt-g) can be used to interrupt a
calculation. And the option ‘Restart’ will end the current
execution of Maxima; a new Maxima process will be invoked, so the input
prompt will start again as (%i1)
.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Xmaxima can be used either directly or from Maxima, to plot 2d
and 3d graphs. From Maxima, it will be used by the functions
plot2d
and plot3d
, if the option [plot_format,
xmaxima]
is used. There are other plotting functions in Maxima that
will only work with the xmaxima plot_format: plotdf
, openplot_curves
and graph2d
. All those plotting functions are documented in
the Maxima Reference Manual.
A command used to create a 2d xmaxima plot, for example:
plot2d(sin(x), [x, -%pi, %pi], [plot_format, xmaxima]);
creates a window with a menu bar with the following options:
By default, each plot will be opened in a new separate window. However,
the plot windows can be embedded into Xmaxima’s text window, by
selecting the option ‘Plot windows -> Embedded’ in the
Options
menu, before the plot command is issued.
The 3d plot has a menu very similar to that obtained with
plot2d
, but with one additional option: Rotate. Normally,
if you click on the plot, it will not be enlarged, as the 2d
plots. Clicking on the left button, while dragging the mouse, will
rotate the plot, allowing to control two angles: azimuth and elevation.
The menu option ‘Zoom’, will change that default behavior, making the mouse enlarge the plot, as in the 2d case. To return to the default behavior (the mouse makes the plot rotate), the Rotate button should be used.
If Xmaxima is executed from the command line, giving as argument the name of a file, it will open that file and interpret it as a plot command, with a syntax specific of Xmaxima. The graph generated by the commands in the file will be plotted in a plot window, and the main window of Xmaxima will not be opened and no communication with Maxima will be established. An example of the contents of a file that can be passed directly to Xmaxima is the following:
plot2d -xfun "sin(A*x);cos(x)" -yradius 10 -sliders {A=1:6} -parameters {A=1}
that file will generate a plot of a cosine function with fixed period, and a sine function with a period that can be changed by moving the slider that appears on the bottom.
the sliders option of xmaxima is one feature that cannot be accessed
directly from plot2d
in Maxima. Other examples of input
files for xmaxima are the files maxoutNNNN.xmaxima (where NNNN
is the process id (an unique number) of the maxima process, that Maxima
creates; when Maxima is run from the command line, and a plotting
function that involves xmaxima is used, the data is not passed directly
to Xmaxima, but it is rather saved into that file and then xmaxima is
executed with the name of that file as argument.
The strings used in those files must be properly represented as Tcl/Tk strings.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Xmaxima’s browser is a Web browser. It lacks many features available in any modern browser, such as style-sheets and tables support. On the other hand, that browser accepts two additional tags, which are not part of HTML, but are very useful to pass commands to Xmaxima from the html page.
One example of that is the Maxima Primer that appears in the browser when Xmaxima starts. That primer has some fields where you can click to get the result inside the browser window. The syntax of the two additional tags is as follows
<eval program=maxima doinsert=0>maxima_command</eval> <eval program=maxima doinsert=1>command</eval> <result modified>result</result>
The first form will highlight the given Maxima command, and when the user double clicks on it, it will be evaluated, but its result will not be inserted back into the original web page.
The second form will act similarly to the first, but the result from
Maxima will now be inserted back into the Web page, in the next tag
‘result’ that appears in the page. The commands shown in the
eval
tags can be edited and reenter.
Some more sample active pages can be found in https://web.archive.org/web/20190926040445/https://web.ma.utexas.edu/users/wfs/netmath/netmath.html
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Xmaxima can be used to access Maxima’s documentation in several
different forms. The describe
of Maxima should work exactly
as it does in Maxima. The Help
menu has a link to the local copy
of the manual, which is distributed with Maxima. In that menu there is
also a link to the Website of Maxima, where some other documentation can be
found.
[ << ] | [ < ] | [ Up ] | [ > ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Jump to: | $
;
A B C D E F G H I K O P R S T Y Z |
---|
Jump to: | $
;
A B C D E F G H I K O P R S T Y Z |
---|
[Top] | [Contents] | [Index] | [ ? ] |
This document was generated on February 14, 2023 using makeinfo.
The buttons in the navigation panels have the following meaning:
Button | Name | Go to | From 1.2.3 go to |
---|---|---|---|
[ << ] | FastBack | Beginning of this chapter or previous chapter | 1 |
[ < ] | Back | Previous section in reading order | 1.2.2 |
[ Up ] | Up | Up section | 1.2 |
[ > ] | Forward | Next section in reading order | 1.2.4 |
[ >> ] | FastForward | Next chapter | 2 |
[Top] | Top | Cover (top) of document | |
[Contents] | Contents | Table of contents | |
[Index] | Index | Index | |
[ ? ] | About | About (help) |
where the Example assumes that the current position is at Subsubsection One-Two-Three of a document of the following structure:
This document was generated on February 14, 2023 using makeinfo.