2022-03-21 Karl Berry <karl@freefriends.org>
* tardate.ac (tex_live_tardate): 2020-03-21 for TL'22.
2022-01-18 Karl Berry <karl@freefriends.org>
* version.ac: 2022, no more /dev.
2021-10-04 Karl Berry <karl@freefriends.org>
* reautoconf with automake-1.16.5.
2021-06-27 Karl Berry <karl@freefriends.org>
* reautoconf: pass -Wno-obsolete by default, since Autoconf 2.70
and later obsoletes many common macros. See m4/README for more.
Also standardize shell usage, etc., but no other functional changes.
2021-04-17 Karl Berry <karl@tug.org>
* version.ac: now 2022/dev since TL'21 is released.
2021-03-23 Karl Berry <karl@tug.org>
* tardate.ac (tex_live_tardate): 2020-03-23 for TL'21.
2021-02-17 Karl Berry <karl@tug.org>
* version.ac: 2021, no more /dev.
2020-05-28 Karl Berry <karl@freefriends.org>
* Makefile.am (world): do not descend into $(texlinks_dir) if it
doesn't exist. Report from Andreas Scherer,
https://tug.org/pipermail/tlbuild/2020q1/004614.html.
2020-05-14 Karl Berry <karl@freefriends.org>
* reautoconf for removal of poppler support.
2020-04-10 Karl Berry <karl@tug.org>
* version.ac: 2020/dev.
2020-03-27 Karl Berry <karl@tug.org>
* tardate.ac (tex_live_tardate): 2020-03-27 for TL'20.
2020-03-06 Karl Berry <karl@tug.org>
* .travis.yml: attempt to reenable musl build on github.
2020-01-31 Karl Berry <karl@tug.org>
* Makefile.am (texlinks_dir): now texk/texlive/tl_support
(instead of tl_scripts).
2020-01-16 Karl Berry <karl@freefriends.org>
* version.ac (tex_live_version): remove /dev, preparing for TL'20.
2019-06-25 Karl Berry <karl@freefriends.org>
* Build: don't call buildinfo from here, the output when the CC
etc. envvars are not set is too misleading. Just write UNAME.
2019-06-24 Karl Berry <karl@freefriends.org>
* doc/buildinfo.sh (compiler_version): new shell function;
ignore useless first "Configured:" line for gcc->cc on Macs.
2019-06-23 Karl Berry <karl@freefriends.org>
* doc/buildinfo.sh: output the compiler/other names
that we pass from the buildinfo target.
* Makefile.am (buildinfo): pass OBJCXX, not OBJC.
* Build: more maintainable exports of TL_*.
2019-06-22 Karl Berry <karl@freefriends.org>
* doc/buildinfo.sh: rename from build-info.sh;
forget /etc/issue;
allow option to omit config.status output;
do not dump environment;
run lsb_release -a. We'll see ...
* Build: use buildinfo.sh instead of inline commands (mostly).
* Makefile.am (buildinfo): make dependency of all-recursive
so that it runs first; rename from build-info; remove from world.
2019-06-06 Karl Berry <karl@tug.org>
* Makefile.am (world): make build-info.
(build-info): new target to invoke doc/build-info.sh.
(build_info_target): new variable.
* Build: export TL_* variables so build-info.sh can report them.
* doc/build-info.sh: new script to report compiler versions,
dump environment, config.status, etc.
2019-05-03 Karl Berry <karl@tug.org>
* version.ac: 2020/dev.
2019-04-07 Karl Berry <karl@freefriends.org>
* tardate.ac (tex_live_tardate): let's hope for 2019-04-07.
2018-10-02 Karl Berry <karl@tug.org>
* Build: TL_MAKE_VERBOSE=VERBOSE=1 by default,
so that test-suite.log will be shown on failure.
https://lists.gnu.org/archive/html/automake/2018-09/msg00015.html
2018-04-28 Karl Berry <karl@tug.org>
* version.ac: 2019/dev.
2018-04-10 Karl Berry <karl@tug.org>
* README.*: update from new tlbuild.
2017-11-15 Karl Berry <karl@tug.org>
* *.test: use #!/bin/sh -vx. Add
2017-03-21 Karl Berry <karl@freefriends.org>
* everywhere: use EXTRA_DIST=TLpatches instead of <pkgname>-PATCHES.
2017-03-18 Karl Berry <karl@tug.org>
* version.ac (tex_live_version): 2017/dev => 2017 for TL17.
2016-11-16 Karl Berry <karl@tug.org>
* Makefile.am (install-exec-hook): warn that the
result of make install is not in itself usable.
2016-06-30 Karl Berry <karl@tug.org>
* version.ac (tex_live_version): 2016 => 2017/dev.
* tardate.ac (tex_live_tardate): 2015-05-12 => 2016-05-23.
(Though this is not used for any release.)
2016-03-16 Karl Berry <karl@tug.org>
* Build: check for exitstatus.txt not having an exit status.
2016-03-06 Karl Berry <karl@tug.org>
* version.ac: remove /dev to prepare for 2016.
2015-06-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* version.ac: Switch 2015 => 2016/dev.
* tardate.ac: Switch to 2015-06-12.
2015-05-28 Peter Breitenlohner <peb@mppmu.mpg.de>
* README.solaris (removed): Moved from here to doc/.
* Makefile.am: Adapted.
2015-04-14 Peter Breitenlohner <peb@mppmu.mpg.de>
* README.solaris: New file from Mojca (without very long lines).
* Makefile.am: Add the new file.
2015-04-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* version.ac (tex_live_version): starting pretest, no more /dev.
2015-03-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2015-03-07.
2014-11-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2014-11-24.
2014-10-21 Karl Berry <karl@tug.org>
* configure.ac: report CC/CXX values, with --version output
if available.
* Build: no need for objc any more.
2014-08-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2014-08-22.
2014-06-16 Peter Breitenlohner <peb@mppmu.mpg.de>
* version.ac: Switch 2014 => 2015/dev.
* tardate.ac: Switch to 2014-06-16.
2014-04-28 Peter Breitenlohner <peb@mppmu.mpg.de>
Makefile.am: New names for README.* files.
2014-04-17 Karl Berry <karl@tug.org>
* version.ac (tex_live_version): starting pretest, no more /dev.
2014-04-04 Karl Berry <karl@tug.org>
* Build (TL_MAKE,MAKE): set both in all cases.
(buildenv.log): include pwd, and use .log instead of .txt.
2014-04-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2014-04-01.
2014-01-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2014-01-01.
2013-12-26 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (ACLOCAL): Ensure aclocal.m4 is up to date.
2013-10-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* doc: New directory for texlive.info & Co.
* Makefile.am, configure.ac: Adapted.
2013-10-05 Karl Berry <karl@tug.org>
* Build: reorder variables and settings for clarity.
(TL_CONF_BANNER): restore variable, default is empty string.
(TL_POSTCONFIGURE): new variable, default true.
2013-09-03 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Drop ACLOCAL_AMFLAGS.
* configure.ac: Use AC_CONFIG_MACRO_DIRS.
Use KPSE_RECURSE_LIBS in m4/kpse-setup.m4 to recurse into all
TeX specific libraries.
2013-09-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2013-09-01.
* Makefile.am: Moved definition of cf_silent* from here ...
* am/recurse.am: ... to here
2013-08-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Add the make target 'texlinks'.
2013-07-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* am: new subdirectory.
* Makefile.am, configure.ac: Use am/recurse.am.
2013-06-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Added Automake options 'tar-pax' for paths
longer than 100 chars and 'no-dist-gzip'.
* version.ac: Switch 2013 => 2014/dev'
* tardate.ac: Switch to 2013-06-24.
2013-03-26 Karl Berry <karl@tug.org>
* Build: use $MAKE rather than $TL_MAKE for the make clean
in the unlikely event of a local Makefile.
2013-03-21 Mojca Miklavec <mojca.miklavec.lists@gmail.com>
* Build: Remove GNUMAKE variable (after freetype2 as the only library
which needed it has been fixed).
2013-03-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2013-03-01.
2013-02-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Building for Windows does not require 'ln -s'.
* README.config: Document '--without-ln-s'.
2013-02-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (mandir, infodir): Change texmf => texmf-dist.
2013-01-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2013-01-24.
* Makefile.am: Running texlinks in texk/texlive/tl_scripts.
2013-01-18 Karl Berry <karl@tug.org>
* Build: remove use of time.
2012-12-17 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Enable silent rules.
2012-11-16 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2012-11-16.
2012-10-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2012-10-24.
2012-08-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2012-08-19.
2012-08-08 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Running texlinks in texk/texlive/linked_scripts.
2012-07-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* Build: Add TL_COMPILER_GFLAGS also to OBJCXXFLAGS.
2012-07-09 Peter Breitenlohner <peb@mppmu.mpg.de>
* version.ac: Switch 2012 => 2013/dev.
2012-06-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2012-06-15.
2012-05-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Test for GNU make before creating Makefile,
required for FreeBSD make and perhaps others.
2012-05-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* README: Update the list of prerequisites.
* README.config: Mention configure options for biber.
2012-04-12 Karl Berry <karl@tug.org>
* Build (TL_COMPILER_GFLAGS): new envvar, used to override -g
for all three compilers, with Build -g.
2012-04-03 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2012-04-03.
2012-03-31 Karl Berry <karl@tug.org>
* Build (TL_CONF_LARGEFILE): switch default to --enable-largefile.
More info in README.config.
2012-03-12 Karl Berry <karl@tug.org>
* README.config: 32-bit rather than 32Bit
2012-03-11 Karl Berry <karl@tug.org>
* README.config: text tweaks for poppler/libxpdf/luatex/etc.
2012-01-16 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Report `$enable_largefile'.
2012-01-13 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2012-01-13.
2011-12-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am: Replace DISTCHECK_CONFIGURE_FLAGS by
AM_DISTCHECK_CONFIGURE_FLAGS (for automake-1.11.2).
2011-12-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Use TL specific installation directories only
for $enable_native_texlive_build=yes (also datarootdir).
Display the installation directories.
* README.config, README.distro: Adapted.
2011-10-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2011-10-05.
2011-08-10 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2011-08-10.
2011-07-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am [EXTRA_DIST]: Add m4/ChangeLog.
2011-07-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* version.ac: Switch 2011 => 2012/dev.
2011-06-21 Karl Berry <karl@tug.org>
* Build: report final exit status.
2011-04-15 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2011-06-15.
2011-04-14 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, configure.ac: Conditional 'cross_compiling' =>
'cross' as in libs/icu, texk/dvipng, and texk/web2c.
* version.ac: Switch 2011/dev => 2011.
2011-04-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2011-04-12.
2011-04-09 Karl Berry <karl@tug.org>
* Build (MACOSX_DEPLOYMENT_TARGET): no longer needed per koch.
2011-03-03 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac: Switch to 2011-03-03.
2011-02-16 Karl Berry <karl@tug.org>
* Build: include uname -a in log, mention log if failure.
2011-01-19 Karl Berry <karl@tug.org>
* Build: don't try to count binaries if no bindir.
2010-10-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* tardate.ac (new): Define the current TeX Live tarball version.
* version.ac: Switch to 2011/dev.
2010-07-06 Peter Breitenlohner <peb@mppmu.mpg.de>
* version.ac (new): Define the current TeX Live version.
2010-05-18 Karl Berry <karl@tug.org>
* Build (TL_CONF_BANNER): switch ident to /pretest.
2010-03-24 Peter Breitenlohner <peb@mppmu.mpg.de>
* Build (TL_CONF_THREADS): Removed, now in libs/icu/configure.
2010-03-05 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (triptrap): Run intermediate triptrap target in
texk/, texk/web2c/Makefile might not yet exist.
2010-03-04 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (triptrap): New target to run TRIP and TRAP tests.
Do not automatically run 'make check' when cross compiling.
2010-03-03 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am, configure.ac: Do not automatically run tests as
part of 'make world' when cross compiling.
2010-02-22 Karl Berry <karl@tug.org>
* Build (TL_CONF_BANNER): 2010/dev.
2009-12-24 Karl Berry <karl@tug.org>
* Makefile.am (world): also run make check.
(check_target): new variable.
(skip): new target, to do nothing.
* Build (TL_CONF_BANNER): add /dev.
2009-12-22 Karl Berry <karl@tug.org>
* build-aux/ylwrap: update from current automake (no real changes).
2009-11-12 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Disable cross compilation of xindy.
* configure.ac: Report absolute build and source dir; reject
paths with embedded spaces.
2009-09-17 Karl Berry <karl@tug.org>
* Build: show Build command itself in build.log.
2009-09-01 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.ac: Report level of compiler warnings used.
2009-08-19 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (dist*check_listfiles): Stricter checking for
'make distcheck': check for leftover files and symlinks.
This really ought to be the Automake default.
2009-06-18 Karl Berry <karl@tug.org>
* Build: eradicate -Wdecl stuff, peb has implemented something
more general.
2009-06-01 Karl Berry <karl@tug.org>
* Makefile.am (world): don't echo the echo.
2009-05-22 Peter Breitenlohner <peb@mppmu.mpg.de>
* Makefile.am (world): serialize to avoid parallel build problems.
2009-05-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* Build (TL_CONF_MAC_FONTS, TL_CONF_XINDY): removed,
no longer required.
2009-05-18 Karl Berry <karl@tug.org>
* Build (-Wdecl): allow with -g, to do -Wdeclaration-after-statement.
2009-05-16 Karl Berry <karl@tug.org>
* Build (TL_CONF_XINDY): default to disabling latex-requiring stuff.
2009-04-29 Karl Berry <karl@tug.org>
* Build (MACOSX_DEPLOYMENT_TARGET): set to 10.3 on powerpc-darwin
(but not i386-darwin).
2009-04-11 Karl Berry <karl@tug.org>
* Makefile.am (world): do the run-texlinks target in texk/tetex
to make the per-format links to binaries.
2009-03-14 Karl Berry <karl@tug.org>
* Build: include timestamps in output.
(TL_BUILD_ENV): include OBJCFLAGS for xdv2pdf.
2009-03-13 Karl Berry <karl@tug.org>
* Build (bindir): call them executables, not binaries.
Use set -vx, not +vx.
2009-03-08 Karl Berry <karl@tug.org>
* Build (TL_CONF_SHARED): new variable, --disable-shared by default.
(-g): alias for --debug.
use set -vx to see configure && make commands in the log.
2009-01-24 Karl Berry <karl@tug.org>
* utils/texinfo: remove, we will no longer include Texinfo in TeX Live
(except for texinfo.tex).
In practice it is more easily available separately,
and the (n)curses build dependency is a useless pain.
* utils/README,
* configure.in,
* Makefile.in,
* README,
* tetex.ac,
* withenable.ac: remove traces of texinfo.
2008-06-26 Peter Breitenlohner <peb@mppmu.mpg.de>
* withenable.ac (kpse_utils_pkglist): add vlna.
2008-06-09 Karl Berry <karl@tug.org>
* Build: try using find instead of ls, to avoid short param list
on hp (Tim tlbuild mail, 6 Jun 2008 10:24:41).
2008-06-08 Karl Berry <karl@tug.org>
* utils/README: warn about nohup specifically.
2008-05-29 Karl Berry <karl@tug.org>
* Makefile.in (install): do not call selfautofix, we now keep
kpathsea/texmf.cnf as a slave copy of Master/texmf/web2c.
* selfautofix: remove file.
2008-05-28 Karl Berry <karl@tug.org>
* Makefile.in (install): invoke new run-texlinks target
in texk/tetex.
* Makefile.in (install-extra): do not go to omfonts, the omega.mk
targets take care of that.
Do not try to install release-tetex-src.txt.
Do not try to run fmtutil, updmap, mktexlsr, texlinks or anything else.
(world): since strip already depends on install, omit install.
Add echo's for when targets are finished.
2008-04-07 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.in: respect library dependencies.
2008-03-25 Karl Berry <karl@tug.org>
* withenable.ac: enable xindy; rebuild configure.
* README,
* utils/README: document clisp & libffcall prerequisites.
2008-03-24 Karl Berry <karl@tug.org>
* Build: exit with appropriate status
2008-03-09 Karl Berry <karl@tug.org>
* Build: exit if no binaries.
2008-03-08 Karl Berry <karl@tug.org>
* Build: --debug
2008-03-03 Peter Breitenlohner <peb@mppmu.mpg.de>
* reautoconf: run first autoheader, then autoconf.
2008-02-29 Peter Breitenlohner <peb@mppmu.mpg.de>
* configure.in: update (AC_SET_MAKE -> AC_PROG_MAKE_SET).
* tetex.ac: append --enable-tetex-build to args in addition
to exporting enable_tetex_build=yes (for maintainer mode).
* reautoconf: add autoheader, allow subdir selection.
2008-02-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* reautoconf: major rewrite.
2008-02-21 Peter Breitenlohner <peb@mppmu.mpg.de>
* tetex.ac: --enable-muliplatform modifies libdir.
* withenable.ac (kpse_utils_pkglist): m4_defined list of all
optional packages, used to generate --without-PKG options.
* configure.in: use kpse_utils_pkglist to select subdirs.
2008-02-02 Peter Breitenlohner <peb@mppmu.mpg.de>
Convert from autoconf-2.13 to autoconf-2.59+:
* configure.in: Use KPSE_CONFIG_SUBDIRS.
* Makefile.in: Add @configure_input@ line.
* aclocal.m4 (new): Generated (aclocal -I texk/m4).
* configure: Regenerated (autoconf).
2007-10-06 Karl Berry <karl@tug.org>
* Build (TL_WORKDIR): allow override of "Work".
2007-10-02 Karl Berry <karl@tug.org>
* configure.in: remove sam2p special case, since we omitted the
program.
2007-08-14 Joachim Schrod <jschrod@acm.org>
* configure.in: dvipdfm and dvipdfmx need pnglib and zlib, too.
2007-07-16 Karl Berry <karl@tug.org>
* Makefile.in (lib): new target, depends on @LIBSDEP@.
(all): do not depend on @LIBSDEP@, redundant since we already
descend and build.
From Joachim, 28 Jun 2007 11:47:10.
2007-03-21 Karl Berry <karl@tug.org>
* Makefile.in (distclean): remove mention of klibtool.
2006-12-14 Karl Berry <karl@tug.org>
* Build: allow invoking from anywhere, and more overrides.
2006-12-11 Karl Berry <karl@tug.org>
* Makefile.in (world, install): hmm, maybe better as a dependency
than a submake.
* Makefile.in (install): reinstate strip.
(strip): actually strip.
2006-12-08 Karl Berry <karl@tug.org>
* Build: set GNUMAKE to TL_MAKE for freetype2/configure, and
export it. Reported by Manfred and Vladimir.
2006-12-05 Karl Berry <karl@tug.org>
* Build: no tlbuild.log, since then the exit status is always
successful.
2006-11-08 Karl Berry <karl@tug.org>
* configure.in (PKGS): remove sam2p after all.
2006-07-12 Karl Berry <karl@tug.org>
* utils/sam2p/Makefile (install): use cp -p, not -a.
2006-06-02 Karl Berry <karl@tug.org>
* texk/web2c/omegadir/com16bit.ch, alephdir/com16bit-rc2.ch
(sup_main_memory, sup_save_size): increase per tex.ch.
From Akira.
(This file public domain.)
Generated by dwww version 1.15 on Sat May 18 14:47:24 CEST 2024.