.. highlight:: sh
.. ATTENTION: You probably should update Misc/python.man, too, if you modify
this file.
.. _using-on-general:
Command line and environment
============================
The CPython interpreter scans the command line and the environment for various
settings.
.. impl-detail::
Other implementations' command line schemes may differ. See
:ref:`implementations` for further resources.
.. _using-on-cmdline:
Command line
------------
When invoking Python, you may specify any of these options::
python [-bBdEhiIOqsSuvVWx?] [-c command | -m module-name | script | - ] [args]
The most common use case is, of course, a simple invocation of a script::
python myscript.py
.. _using-on-interface-options:
Interface options
~~~~~~~~~~~~~~~~~
The interpreter interface resembles that of the UNIX shell, but provides some
additional methods of invocation:
* When called with standard input connected to a tty device, it prompts for
commands and executes them until an EOF (an end-of-file character, you can
produce that with :kbd:`Ctrl-D` on UNIX or :kbd:`Ctrl-Z, Enter` on Windows) is read.
* When called with a file name argument or with a file as standard input, it
reads and executes a script from that file.
* When called with a directory name argument, it reads and executes an
appropriately named script from that directory.
* When called with ``-c command``, it executes the Python statement(s) given as
*command*. Here *command* may contain multiple statements separated by
newlines. Leading whitespace is significant in Python statements!
* When called with ``-m module-name``, the given module is located on the
Python module path and executed as a script.
In non-interactive mode, the entire input is parsed before it is executed.
An interface option terminates the list of options consumed by the interpreter,
all consecutive arguments will end up in :data:`sys.argv` -- note that the first
element, subscript zero (``sys.argv[0]``), is a string reflecting the program's
source.
.. cmdoption:: -c <command>
Execute the Python code in *command*. *command* can be one or more
statements separated by newlines, with significant leading whitespace as in
normal module code.
If this option is given, the first element of :data:`sys.argv` will be
``"-c"`` and the current directory will be added to the start of
:data:`sys.path` (allowing modules in that directory to be imported as top
level modules).
.. audit-event:: cpython.run_command command cmdoption-c
.. cmdoption:: -m <module-name>
Search :data:`sys.path` for the named module and execute its contents as
the :mod:`__main__` module.
Since the argument is a *module* name, you must not give a file extension
(``.py``). The module name should be a valid absolute Python module name, but
the implementation may not always enforce this (e.g. it may allow you to
use a name that includes a hyphen).
Package names (including namespace packages) are also permitted. When a
package name is supplied instead
of a normal module, the interpreter will execute ``<pkg>.__main__`` as
the main module. This behaviour is deliberately similar to the handling
of directories and zipfiles that are passed to the interpreter as the
script argument.
.. note::
This option cannot be used with built-in modules and extension modules
written in C, since they do not have Python module files. However, it
can still be used for precompiled modules, even if the original source
file is not available.
If this option is given, the first element of :data:`sys.argv` will be the
full path to the module file (while the module file is being located, the
first element will be set to ``"-m"``). As with the :option:`-c` option,
the current directory will be added to the start of :data:`sys.path`.
:option:`-I` option can be used to run the script in isolated mode where
:data:`sys.path` contains neither the current directory nor the user's
site-packages directory. All :envvar:`PYTHON*` environment variables are
ignored, too.
Many standard library modules contain code that is invoked on their execution
as a script. An example is the :mod:`timeit` module::
python -m timeit -s 'setup here' 'benchmarked code here'
python -m timeit -h # for details
.. audit-event:: cpython.run_module module-name cmdoption-m
.. seealso::
:func:`runpy.run_module`
Equivalent functionality directly available to Python code
:pep:`338` -- Executing modules as scripts
.. versionchanged:: 3.1
Supply the package name to run a ``__main__`` submodule.
.. versionchanged:: 3.4
namespace packages are also supported
.. _cmdarg-dash:
.. describe:: -
Read commands from standard input (:data:`sys.stdin`). If standard input is
a terminal, :option:`-i` is implied.
If this option is given, the first element of :data:`sys.argv` will be
``"-"`` and the current directory will be added to the start of
:data:`sys.path`.
.. audit-event:: cpython.run_stdin "" ""
.. _cmdarg-script:
.. describe:: <script>
Execute the Python code contained in *script*, which must be a filesystem
path (absolute or relative) referring to either a Python file, a directory
containing a ``__main__.py`` file, or a zipfile containing a
``__main__.py`` file.
If this option is given, the first element of :data:`sys.argv` will be the
script name as given on the command line.
If the script name refers directly to a Python file, the directory
containing that file is added to the start of :data:`sys.path`, and the
file is executed as the :mod:`__main__` module.
If the script name refers to a directory or zipfile, the script name is
added to the start of :data:`sys.path` and the ``__main__.py`` file in
that location is executed as the :mod:`__main__` module.
:option:`-I` option can be used to run the script in isolated mode where
:data:`sys.path` contains neither the script's directory nor the user's
site-packages directory. All :envvar:`PYTHON*` environment variables are
ignored, too.
.. audit-event:: cpython.run_file filename
.. seealso::
:func:`runpy.run_path`
Equivalent functionality directly available to Python code
If no interface option is given, :option:`-i` is implied, ``sys.argv[0]`` is
an empty string (``""``) and the current directory will be added to the
start of :data:`sys.path`. Also, tab-completion and history editing is
automatically enabled, if available on your platform (see
:ref:`rlcompleter-config`).
.. seealso:: :ref:`tut-invoking`
.. versionchanged:: 3.4
Automatic enabling of tab-completion and history editing.
.. _using-on-generic-options:
Generic options
~~~~~~~~~~~~~~~
.. cmdoption:: -?
-h
--help
Print a short description of all command line options and corresponding
environment variables and exit.
.. cmdoption:: --help-env
Print a short description of Python-specific environment variables
and exit.
.. versionadded:: 3.11
.. cmdoption:: --help-xoptions
Print a description of implementation-specific :option:`-X` options
and exit.
.. versionadded:: 3.11
.. cmdoption:: --help-all
Print complete usage information and exit.
.. versionadded:: 3.11
.. cmdoption:: -V
--version
Print the Python version number and exit. Example output could be:
.. code-block:: none
Python 3.8.0b2+
When given twice, print more information about the build, like:
.. code-block:: none
Python 3.8.0b2+ (3.8:0c076caaa8, Apr 20 2019, 21:55:00)
[GCC 6.2.0 20161005]
.. versionadded:: 3.6
The ``-VV`` option.
.. _using-on-misc-options:
Miscellaneous options
~~~~~~~~~~~~~~~~~~~~~
.. cmdoption:: -b
Issue a warning when comparing :class:`bytes` or :class:`bytearray` with
:class:`str` or :class:`bytes` with :class:`int`. Issue an error when the
option is given twice (:option:`!-bb`).
.. versionchanged:: 3.5
Affects comparisons of :class:`bytes` with :class:`int`.
.. cmdoption:: -B
If given, Python won't try to write ``.pyc`` files on the
import of source modules. See also :envvar:`PYTHONDONTWRITEBYTECODE`.
.. cmdoption:: --check-hash-based-pycs default|always|never
Control the validation behavior of hash-based ``.pyc`` files. See
:ref:`pyc-invalidation`. When set to ``default``, checked and unchecked
hash-based bytecode cache files are validated according to their default
semantics. When set to ``always``, all hash-based ``.pyc`` files, whether
checked or unchecked, are validated against their corresponding source
file. When set to ``never``, hash-based ``.pyc`` files are not validated
against their corresponding source files.
The semantics of timestamp-based ``.pyc`` files are unaffected by this
option.
.. cmdoption:: -d
Turn on parser debugging output (for expert only, depending on compilation
options). See also :envvar:`PYTHONDEBUG`.
.. cmdoption:: -E
Ignore all :envvar:`PYTHON*` environment variables, e.g.
:envvar:`PYTHONPATH` and :envvar:`PYTHONHOME`, that might be set.
See also the :option:`-P` and :option:`-I` (isolated) options.
.. cmdoption:: -i
When a script is passed as first argument or the :option:`-c` option is used,
enter interactive mode after executing the script or the command, even when
:data:`sys.stdin` does not appear to be a terminal. The
:envvar:`PYTHONSTARTUP` file is not read.
This can be useful to inspect global variables or a stack trace when a script
raises an exception. See also :envvar:`PYTHONINSPECT`.
.. cmdoption:: -I
Run Python in isolated mode. This also implies :option:`-E`, :option:`-P`
and :option:`-s` options.
In isolated mode :data:`sys.path` contains neither the script's directory nor
the user's site-packages directory. All :envvar:`PYTHON*` environment
variables are ignored, too. Further restrictions may be imposed to prevent
the user from injecting malicious code.
.. versionadded:: 3.4
.. cmdoption:: -O
Remove assert statements and any code conditional on the value of
:const:`__debug__`. Augment the filename for compiled
(:term:`bytecode`) files by adding ``.opt-1`` before the ``.pyc``
extension (see :pep:`488`). See also :envvar:`PYTHONOPTIMIZE`.
.. versionchanged:: 3.5
Modify ``.pyc`` filenames according to :pep:`488`.
.. cmdoption:: -OO
Do :option:`-O` and also discard docstrings. Augment the filename
for compiled (:term:`bytecode`) files by adding ``.opt-2`` before the
``.pyc`` extension (see :pep:`488`).
.. versionchanged:: 3.5
Modify ``.pyc`` filenames according to :pep:`488`.
.. cmdoption:: -P
Don't prepend a potentially unsafe path to :data:`sys.path`:
* ``python -m module`` command line: Don't prepend the current working
directory.
* ``python script.py`` command line: Don't prepend the script's directory.
If it's a symbolic link, resolve symbolic links.
* ``python -c code`` and ``python`` (REPL) command lines: Don't prepend an
empty string, which means the current working directory.
See also the :envvar:`PYTHONSAFEPATH` environment variable, and :option:`-E`
and :option:`-I` (isolated) options.
.. versionadded:: 3.11
.. cmdoption:: -q
Don't display the copyright and version messages even in interactive mode.
.. versionadded:: 3.2
.. cmdoption:: -R
Turn on hash randomization. This option only has an effect if the
:envvar:`PYTHONHASHSEED` environment variable is set to ``0``, since hash
randomization is enabled by default.
On previous versions of Python, this option turns on hash randomization,
so that the :meth:`__hash__` values of str and bytes objects
are "salted" with an unpredictable random value. Although they remain
constant within an individual Python process, they are not predictable
between repeated invocations of Python.
Hash randomization is intended to provide protection against a
denial-of-service caused by carefully chosen inputs that exploit the worst
case performance of a dict construction, O(n\ :sup:`2`) complexity. See
http://www.ocert.org/advisories/ocert-2011-003.html for details.
:envvar:`PYTHONHASHSEED` allows you to set a fixed value for the hash
seed secret.
.. versionchanged:: 3.7
The option is no longer ignored.
.. versionadded:: 3.2.3
.. cmdoption:: -s
Don't add the :data:`user site-packages directory <site.USER_SITE>` to
:data:`sys.path`.
.. seealso::
:pep:`370` -- Per user site-packages directory
.. cmdoption:: -S
Disable the import of the module :mod:`site` and the site-dependent
manipulations of :data:`sys.path` that it entails. Also disable these
manipulations if :mod:`site` is explicitly imported later (call
:func:`site.main` if you want them to be triggered).
.. cmdoption:: -u
Force the stdout and stderr streams to be unbuffered. This option has no
effect on the stdin stream.
See also :envvar:`PYTHONUNBUFFERED`.
.. versionchanged:: 3.7
The text layer of the stdout and stderr streams now is unbuffered.
.. cmdoption:: -v
Print a message each time a module is initialized, showing the place
(filename or built-in module) from which it is loaded. When given twice
(:option:`!-vv`), print a message for each file that is checked for when
searching for a module. Also provides information on module cleanup at exit.
.. versionchanged:: 3.10
The :mod:`site` module reports the site-specific paths
and :file:`.pth` files being processed.
See also :envvar:`PYTHONVERBOSE`.
.. _using-on-warnings:
.. cmdoption:: -W arg
Warning control. Python's warning machinery by default prints warning
messages to :data:`sys.stderr`.
The simplest settings apply a particular action unconditionally to all
warnings emitted by a process (even those that are otherwise ignored by
default)::
-Wdefault # Warn once per call location
-Werror # Convert to exceptions
-Walways # Warn every time
-Wmodule # Warn once per calling module
-Wonce # Warn once per Python process
-Wignore # Never warn
The action names can be abbreviated as desired and the interpreter will
resolve them to the appropriate action name. For example, ``-Wi`` is the
same as ``-Wignore``.
The full form of argument is::
action:message:category:module:lineno
Empty fields match all values; trailing empty fields may be omitted. For
example ``-W ignore::DeprecationWarning`` ignores all DeprecationWarning
warnings.
The *action* field is as explained above but only applies to warnings that
match the remaining fields.
The *message* field must match the whole warning message; this match is
case-insensitive.
The *category* field matches the warning category
(ex: ``DeprecationWarning``). This must be a class name; the match test
whether the actual warning category of the message is a subclass of the
specified warning category.
The *module* field matches the (fully qualified) module name; this match is
case-sensitive.
The *lineno* field matches the line number, where zero matches all line
numbers and is thus equivalent to an omitted line number.
Multiple :option:`-W` options can be given; when a warning matches more than
one option, the action for the last matching option is performed. Invalid
:option:`-W` options are ignored (though, a warning message is printed about
invalid options when the first warning is issued).
Warnings can also be controlled using the :envvar:`PYTHONWARNINGS`
environment variable and from within a Python program using the
:mod:`warnings` module. For example, the :func:`warnings.filterwarnings`
function can be used to use a regular expression on the warning message.
See :ref:`warning-filter` and :ref:`describing-warning-filters` for more
details.
.. cmdoption:: -x
Skip the first line of the source, allowing use of non-Unix forms of
``#!cmd``. This is intended for a DOS specific hack only.
.. cmdoption:: -X
Reserved for various implementation-specific options. CPython currently
defines the following possible values:
* ``-X faulthandler`` to enable :mod:`faulthandler`;
* ``-X showrefcount`` to output the total reference count and number of used
memory blocks when the program finishes or after each statement in the
interactive interpreter. This only works on :ref:`debug builds
<debug-build>`.
* ``-X tracemalloc`` to start tracing Python memory allocations using the
:mod:`tracemalloc` module. By default, only the most recent frame is
stored in a traceback of a trace. Use ``-X tracemalloc=NFRAME`` to start
tracing with a traceback limit of *NFRAME* frames. See the
:func:`tracemalloc.start` for more information.
* ``-X int_max_str_digits`` configures the :ref:`integer string conversion
length limitation <int_max_str_digits>`. See also
:envvar:`PYTHONINTMAXSTRDIGITS`.
* ``-X importtime`` to show how long each import takes. It shows module
name, cumulative time (including nested imports) and self time (excluding
nested imports). Note that its output may be broken in multi-threaded
application. Typical usage is ``python3 -X importtime -c 'import
asyncio'``. See also :envvar:`PYTHONPROFILEIMPORTTIME`.
* ``-X dev``: enable :ref:`Python Development Mode <devmode>`, introducing
additional runtime checks that are too expensive to be enabled by
default.
* ``-X utf8`` enables the :ref:`Python UTF-8 Mode <utf8-mode>`.
``-X utf8=0`` explicitly disables :ref:`Python UTF-8 Mode <utf8-mode>`
(even when it would otherwise activate automatically).
* ``-X pycache_prefix=PATH`` enables writing ``.pyc`` files to a parallel
tree rooted at the given directory instead of to the code tree. See also
:envvar:`PYTHONPYCACHEPREFIX`.
* ``-X warn_default_encoding`` issues a :class:`EncodingWarning` when the
locale-specific default encoding is used for opening files.
See also :envvar:`PYTHONWARNDEFAULTENCODING`.
* ``-X no_debug_ranges`` disables the inclusion of the tables mapping extra
location information (end line, start column offset and end column offset)
to every instruction in code objects. This is useful when smaller code
objects and pyc files are desired as well as suppressing the extra visual
location indicators when the interpreter displays tracebacks. See also
:envvar:`PYTHONNODEBUGRANGES`.
* ``-X frozen_modules`` determines whether or not frozen modules are
ignored by the import machinery. A value of "on" means they get
imported and "off" means they are ignored. The default is "on"
if this is an installed Python (the normal case). If it's under
development (running from the source tree) then the default is "off".
Note that the "importlib_bootstrap" and "importlib_bootstrap_external"
frozen modules are always used, even if this flag is set to "off".
It also allows passing arbitrary values and retrieving them through the
:data:`sys._xoptions` dictionary.
.. versionchanged:: 3.2
The :option:`-X` option was added.
.. versionadded:: 3.3
The ``-X faulthandler`` option.
.. versionadded:: 3.4
The ``-X showrefcount`` and ``-X tracemalloc`` options.
.. versionadded:: 3.6
The ``-X showalloccount`` option.
.. versionadded:: 3.7
The ``-X importtime``, ``-X dev`` and ``-X utf8`` options.
.. versionadded:: 3.8
The ``-X pycache_prefix`` option. The ``-X dev`` option now logs
``close()`` exceptions in :class:`io.IOBase` destructor.
.. versionchanged:: 3.9
Using ``-X dev`` option, check *encoding* and *errors* arguments on
string encoding and decoding operations.
The ``-X showalloccount`` option has been removed.
.. versionadded:: 3.10
The ``-X warn_default_encoding`` option.
.. deprecated-removed:: 3.9 3.10
The ``-X oldparser`` option.
.. versionadded:: 3.11
The ``-X no_debug_ranges`` option.
.. versionadded:: 3.11
The ``-X frozen_modules`` option.
.. versionadded:: 3.11
The ``-X int_max_str_digits`` option.
Options you shouldn't use
~~~~~~~~~~~~~~~~~~~~~~~~~
.. cmdoption:: -J
Reserved for use by Jython_.
.. _Jython: https://www.jython.org/
.. _using-on-envvars:
Environment variables
---------------------
These environment variables influence Python's behavior, they are processed
before the command-line switches other than -E or -I. It is customary that
command-line switches override environmental variables where there is a
conflict.
.. envvar:: PYTHONHOME
Change the location of the standard Python libraries. By default, the
libraries are searched in :file:`{prefix}/lib/python{version}` and
:file:`{exec_prefix}/lib/python{version}`, where :file:`{prefix}` and
:file:`{exec_prefix}` are installation-dependent directories, both defaulting
to :file:`/usr/local`.
When :envvar:`PYTHONHOME` is set to a single directory, its value replaces
both :file:`{prefix}` and :file:`{exec_prefix}`. To specify different values
for these, set :envvar:`PYTHONHOME` to :file:`{prefix}:{exec_prefix}`.
.. envvar:: PYTHONPATH
Augment the default search path for module files. The format is the same as
the shell's :envvar:`PATH`: one or more directory pathnames separated by
:data:`os.pathsep` (e.g. colons on Unix or semicolons on Windows).
Non-existent directories are silently ignored.
In addition to normal directories, individual :envvar:`PYTHONPATH` entries
may refer to zipfiles containing pure Python modules (in either source or
compiled form). Extension modules cannot be imported from zipfiles.
The default search path is installation dependent, but generally begins with
:file:`{prefix}/lib/python{version}` (see :envvar:`PYTHONHOME` above). It
is *always* appended to :envvar:`PYTHONPATH`.
An additional directory will be inserted in the search path in front of
:envvar:`PYTHONPATH` as described above under
:ref:`using-on-interface-options`. The search path can be manipulated from
within a Python program as the variable :data:`sys.path`.
.. envvar:: PYTHONSAFEPATH
If this is set to a non-empty string, don't prepend a potentially unsafe
path to :data:`sys.path`: see the :option:`-P` option for details.
.. versionadded:: 3.11
.. envvar:: PYTHONPLATLIBDIR
If this is set to a non-empty string, it overrides the :data:`sys.platlibdir`
value.
.. versionadded:: 3.9
.. envvar:: PYTHONSTARTUP
If this is the name of a readable file, the Python commands in that file are
executed before the first prompt is displayed in interactive mode. The file
is executed in the same namespace where interactive commands are executed so
that objects defined or imported in it can be used without qualification in
the interactive session. You can also change the prompts :data:`sys.ps1` and
:data:`sys.ps2` and the hook :data:`sys.__interactivehook__` in this file.
.. audit-event:: cpython.run_startup filename envvar-PYTHONSTARTUP
Raises an :ref:`auditing event <auditing>` ``cpython.run_startup`` with
the filename as the argument when called on startup.
.. envvar:: PYTHONOPTIMIZE
If this is set to a non-empty string it is equivalent to specifying the
:option:`-O` option. If set to an integer, it is equivalent to specifying
:option:`-O` multiple times.
.. envvar:: PYTHONBREAKPOINT
If this is set, it names a callable using dotted-path notation. The module
containing the callable will be imported and then the callable will be run
by the default implementation of :func:`sys.breakpointhook` which itself is
called by built-in :func:`breakpoint`. If not set, or set to the empty
string, it is equivalent to the value "pdb.set_trace". Setting this to the
string "0" causes the default implementation of :func:`sys.breakpointhook`
to do nothing but return immediately.
.. versionadded:: 3.7
.. envvar:: PYTHONDEBUG
If this is set to a non-empty string it is equivalent to specifying the
:option:`-d` option. If set to an integer, it is equivalent to specifying
:option:`-d` multiple times.
.. envvar:: PYTHONINSPECT
If this is set to a non-empty string it is equivalent to specifying the
:option:`-i` option.
This variable can also be modified by Python code using :data:`os.environ`
to force inspect mode on program termination.
.. envvar:: PYTHONUNBUFFERED
If this is set to a non-empty string it is equivalent to specifying the
:option:`-u` option.
.. envvar:: PYTHONVERBOSE
If this is set to a non-empty string it is equivalent to specifying the
:option:`-v` option. If set to an integer, it is equivalent to specifying
:option:`-v` multiple times.
.. envvar:: PYTHONCASEOK
If this is set, Python ignores case in :keyword:`import` statements. This
only works on Windows and macOS.
.. envvar:: PYTHONDONTWRITEBYTECODE
If this is set to a non-empty string, Python won't try to write ``.pyc``
files on the import of source modules. This is equivalent to
specifying the :option:`-B` option.
.. envvar:: PYTHONPYCACHEPREFIX
If this is set, Python will write ``.pyc`` files in a mirror directory tree
at this path, instead of in ``__pycache__`` directories within the source
tree. This is equivalent to specifying the :option:`-X`
``pycache_prefix=PATH`` option.
.. versionadded:: 3.8
.. envvar:: PYTHONHASHSEED
If this variable is not set or set to ``random``, a random value is used
to seed the hashes of str and bytes objects.
If :envvar:`PYTHONHASHSEED` is set to an integer value, it is used as a fixed
seed for generating the hash() of the types covered by the hash
randomization.
Its purpose is to allow repeatable hashing, such as for selftests for the
interpreter itself, or to allow a cluster of python processes to share hash
values.
The integer must be a decimal number in the range [0,4294967295]. Specifying
the value 0 will disable hash randomization.
.. versionadded:: 3.2.3
.. envvar:: PYTHONINTMAXSTRDIGITS
If this variable is set to an integer, it is used to configure the
interpreter's global :ref:`integer string conversion length limitation
<int_max_str_digits>`.
.. versionadded:: 3.11
.. envvar:: PYTHONIOENCODING
If this is set before running the interpreter, it overrides the encoding used
for stdin/stdout/stderr, in the syntax ``encodingname:errorhandler``. Both
the ``encodingname`` and the ``:errorhandler`` parts are optional and have
the same meaning as in :func:`str.encode`.
For stderr, the ``:errorhandler`` part is ignored; the handler will always be
``'backslashreplace'``.
.. versionchanged:: 3.4
The ``encodingname`` part is now optional.
.. versionchanged:: 3.6
On Windows, the encoding specified by this variable is ignored for interactive
console buffers unless :envvar:`PYTHONLEGACYWINDOWSSTDIO` is also specified.
Files and pipes redirected through the standard streams are not affected.
.. envvar:: PYTHONNOUSERSITE
If this is set, Python won't add the :data:`user site-packages directory
<site.USER_SITE>` to :data:`sys.path`.
.. seealso::
:pep:`370` -- Per user site-packages directory
.. envvar:: PYTHONUSERBASE
Defines the :data:`user base directory <site.USER_BASE>`, which is used to
compute the path of the :data:`user site-packages directory <site.USER_SITE>`
and :ref:`Distutils installation paths <inst-alt-install-user>` for
``python setup.py install --user``.
.. seealso::
:pep:`370` -- Per user site-packages directory
.. envvar:: PYTHONEXECUTABLE
If this environment variable is set, ``sys.argv[0]`` will be set to its
value instead of the value got through the C runtime. Only works on
macOS.
.. envvar:: PYTHONWARNINGS
This is equivalent to the :option:`-W` option. If set to a comma
separated string, it is equivalent to specifying :option:`-W` multiple
times, with filters later in the list taking precedence over those earlier
in the list.
The simplest settings apply a particular action unconditionally to all
warnings emitted by a process (even those that are otherwise ignored by
default)::
PYTHONWARNINGS=default # Warn once per call location
PYTHONWARNINGS=error # Convert to exceptions
PYTHONWARNINGS=always # Warn every time
PYTHONWARNINGS=module # Warn once per calling module
PYTHONWARNINGS=once # Warn once per Python process
PYTHONWARNINGS=ignore # Never warn
See :ref:`warning-filter` and :ref:`describing-warning-filters` for more
details.
.. envvar:: PYTHONFAULTHANDLER
If this environment variable is set to a non-empty string,
:func:`faulthandler.enable` is called at startup: install a handler for
:const:`SIGSEGV`, :const:`SIGFPE`, :const:`SIGABRT`, :const:`SIGBUS` and
:const:`SIGILL` signals to dump the Python traceback. This is equivalent to
:option:`-X` ``faulthandler`` option.
.. versionadded:: 3.3
.. envvar:: PYTHONTRACEMALLOC
If this environment variable is set to a non-empty string, start tracing
Python memory allocations using the :mod:`tracemalloc` module. The value of
the variable is the maximum number of frames stored in a traceback of a
trace. For example, ``PYTHONTRACEMALLOC=1`` stores only the most recent
frame. See the :func:`tracemalloc.start` for more information.
.. versionadded:: 3.4
.. envvar:: PYTHONPROFILEIMPORTTIME
If this environment variable is set to a non-empty string, Python will
show how long each import takes. This is exactly equivalent to setting
``-X importtime`` on the command line.
.. versionadded:: 3.7
.. envvar:: PYTHONASYNCIODEBUG
If this environment variable is set to a non-empty string, enable the
:ref:`debug mode <asyncio-debug-mode>` of the :mod:`asyncio` module.
.. versionadded:: 3.4
.. envvar:: PYTHONMALLOC
Set the Python memory allocators and/or install debug hooks.
Set the family of memory allocators used by Python:
* ``default``: use the :ref:`default memory allocators
<default-memory-allocators>`.
* ``malloc``: use the :c:func:`malloc` function of the C library
for all domains (:c:data:`PYMEM_DOMAIN_RAW`, :c:data:`PYMEM_DOMAIN_MEM`,
:c:data:`PYMEM_DOMAIN_OBJ`).
* ``pymalloc``: use the :ref:`pymalloc allocator <pymalloc>` for
:c:data:`PYMEM_DOMAIN_MEM` and :c:data:`PYMEM_DOMAIN_OBJ` domains and use
the :c:func:`malloc` function for the :c:data:`PYMEM_DOMAIN_RAW` domain.
Install :ref:`debug hooks <pymem-debug-hooks>`:
* ``debug``: install debug hooks on top of the :ref:`default memory
allocators <default-memory-allocators>`.
* ``malloc_debug``: same as ``malloc`` but also install debug hooks.
* ``pymalloc_debug``: same as ``pymalloc`` but also install debug hooks.
.. versionchanged:: 3.7
Added the ``"default"`` allocator.
.. versionadded:: 3.6
.. envvar:: PYTHONMALLOCSTATS
If set to a non-empty string, Python will print statistics of the
:ref:`pymalloc memory allocator <pymalloc>` every time a new pymalloc object
arena is created, and on shutdown.
This variable is ignored if the :envvar:`PYTHONMALLOC` environment variable
is used to force the :c:func:`malloc` allocator of the C library, or if
Python is configured without ``pymalloc`` support.
.. versionchanged:: 3.6
This variable can now also be used on Python compiled in release mode.
It now has no effect if set to an empty string.
.. envvar:: PYTHONLEGACYWINDOWSFSENCODING
If set to a non-empty string, the default :term:`filesystem encoding and
error handler` mode will revert to their pre-3.6 values of 'mbcs' and
'replace', respectively. Otherwise, the new defaults 'utf-8' and
'surrogatepass' are used.
This may also be enabled at runtime with
:func:`sys._enablelegacywindowsfsencoding()`.
.. availability:: Windows.
.. versionadded:: 3.6
See :pep:`529` for more details.
.. envvar:: PYTHONLEGACYWINDOWSSTDIO
If set to a non-empty string, does not use the new console reader and
writer. This means that Unicode characters will be encoded according to
the active console code page, rather than using utf-8.
This variable is ignored if the standard streams are redirected (to files
or pipes) rather than referring to console buffers.
.. availability:: Windows.
.. versionadded:: 3.6
.. envvar:: PYTHONCOERCECLOCALE
If set to the value ``0``, causes the main Python command line application
to skip coercing the legacy ASCII-based C and POSIX locales to a more
capable UTF-8 based alternative.
If this variable is *not* set (or is set to a value other than ``0``), the
``LC_ALL`` locale override environment variable is also not set, and the
current locale reported for the ``LC_CTYPE`` category is either the default
``C`` locale, or else the explicitly ASCII-based ``POSIX`` locale, then the
Python CLI will attempt to configure the following locales for the
``LC_CTYPE`` category in the order listed before loading the interpreter
runtime:
* ``C.UTF-8``
* ``C.utf8``
* ``UTF-8``
If setting one of these locale categories succeeds, then the ``LC_CTYPE``
environment variable will also be set accordingly in the current process
environment before the Python runtime is initialized. This ensures that in
addition to being seen by both the interpreter itself and other locale-aware
components running in the same process (such as the GNU ``readline``
library), the updated setting is also seen in subprocesses (regardless of
whether or not those processes are running a Python interpreter), as well as
in operations that query the environment rather than the current C locale
(such as Python's own :func:`locale.getdefaultlocale`).
Configuring one of these locales (either explicitly or via the above
implicit locale coercion) automatically enables the ``surrogateescape``
:ref:`error handler <error-handlers>` for :data:`sys.stdin` and
:data:`sys.stdout` (:data:`sys.stderr` continues to use ``backslashreplace``
as it does in any other locale). This stream handling behavior can be
overridden using :envvar:`PYTHONIOENCODING` as usual.
For debugging purposes, setting ``PYTHONCOERCECLOCALE=warn`` will cause
Python to emit warning messages on ``stderr`` if either the locale coercion
activates, or else if a locale that *would* have triggered coercion is
still active when the Python runtime is initialized.
Also note that even when locale coercion is disabled, or when it fails to
find a suitable target locale, :envvar:`PYTHONUTF8` will still activate by
default in legacy ASCII-based locales. Both features must be disabled in
order to force the interpreter to use ``ASCII`` instead of ``UTF-8`` for
system interfaces.
.. availability:: Unix.
.. versionadded:: 3.7
See :pep:`538` for more details.
.. envvar:: PYTHONDEVMODE
If this environment variable is set to a non-empty string, enable
:ref:`Python Development Mode <devmode>`, introducing additional runtime
checks that are too expensive to be enabled by default.
.. versionadded:: 3.7
.. envvar:: PYTHONUTF8
If set to ``1``, enable the :ref:`Python UTF-8 Mode <utf8-mode>`.
If set to ``0``, disable the :ref:`Python UTF-8 Mode <utf8-mode>`.
Setting any other non-empty string causes an error during interpreter
initialisation.
.. versionadded:: 3.7
.. envvar:: PYTHONWARNDEFAULTENCODING
If this environment variable is set to a non-empty string, issue a
:class:`EncodingWarning` when the locale-specific default encoding is used.
See :ref:`io-encoding-warning` for details.
.. versionadded:: 3.10
.. envvar:: PYTHONNODEBUGRANGES
If this variable is set, it disables the inclusion of the tables mapping
extra location information (end line, start column offset and end column
offset) to every instruction in code objects. This is useful when smaller
code objects and pyc files are desired as well as suppressing the extra visual
location indicators when the interpreter displays tracebacks.
.. versionadded:: 3.11
Debug-mode variables
~~~~~~~~~~~~~~~~~~~~
.. envvar:: PYTHONTHREADDEBUG
If set, Python will print threading debug info into stdout.
Need a :ref:`debug build of Python <debug-build>`.
.. deprecated-removed:: 3.10 3.12
.. envvar:: PYTHONDUMPREFS
If set, Python will dump objects and reference counts still alive after
shutting down the interpreter.
Need Python configured with the :option:`--with-trace-refs` build option.
.. envvar:: PYTHONDUMPREFSFILE=FILENAME
If set, Python will dump objects and reference counts still alive
after shutting down the interpreter into a file called *FILENAME*.
Need Python configured with the :option:`--with-trace-refs` build option.
.. versionadded:: 3.11
Generated by dwww version 1.15 on Sun May 19 03:55:33 CEST 2024.