:mod:`sys` --- System-specific parameters and functions
=======================================================
.. module:: sys
:synopsis: Access system-specific parameters and functions.
--------------
This module provides access to some variables used or maintained by the
interpreter and to functions that interact strongly with the interpreter. It is
always available.
.. data:: abiflags
On POSIX systems where Python was built with the standard ``configure``
script, this contains the ABI flags as specified by :pep:`3149`.
.. versionchanged:: 3.8
Default flags became an empty string (``m`` flag for pymalloc has been
removed).
.. versionadded:: 3.2
.. function:: addaudithook(hook)
Append the callable *hook* to the list of active auditing hooks for the
current (sub)interpreter.
When an auditing event is raised through the :func:`sys.audit` function, each
hook will be called in the order it was added with the event name and the
tuple of arguments. Native hooks added by :c:func:`PySys_AddAuditHook` are
called first, followed by hooks added in the current (sub)interpreter. Hooks
can then log the event, raise an exception to abort the operation,
or terminate the process entirely.
Note that audit hooks are primarily for collecting information about internal
or otherwise unobservable actions, whether by Python or libraries written in
Python. They are not suitable for implementing a "sandbox". In particular,
malicious code can trivially disable or bypass hooks added using this
function. At a minimum, any security-sensitive hooks must be added using the
C API :c:func:`PySys_AddAuditHook` before initialising the runtime, and any
modules allowing arbitrary memory modification (such as :mod:`ctypes`) should
be completely removed or closely monitored.
.. audit-event:: sys.addaudithook "" sys.addaudithook
Calling :func:`sys.addaudithook` will itself raise an auditing event
named ``sys.addaudithook`` with no arguments. If any
existing hooks raise an exception derived from :class:`RuntimeError`, the
new hook will not be added and the exception suppressed. As a result,
callers cannot assume that their hook has been added unless they control
all existing hooks.
See the :ref:`audit events table <audit-events>` for all events raised by
CPython, and :pep:`578` for the original design discussion.
.. versionadded:: 3.8
.. versionchanged:: 3.8.1
Exceptions derived from :class:`Exception` but not :class:`RuntimeError`
are no longer suppressed.
.. impl-detail::
When tracing is enabled (see :func:`settrace`), Python hooks are only
traced if the callable has a ``__cantrace__`` member that is set to a
true value. Otherwise, trace functions will skip the hook.
.. data:: argv
The list of command line arguments passed to a Python script. ``argv[0]`` is the
script name (it is operating system dependent whether this is a full pathname or
not). If the command was executed using the :option:`-c` command line option to
the interpreter, ``argv[0]`` is set to the string ``'-c'``. If no script name
was passed to the Python interpreter, ``argv[0]`` is the empty string.
To loop over the standard input, or the list of files given on the
command line, see the :mod:`fileinput` module.
See also :data:`sys.orig_argv`.
.. note::
On Unix, command line arguments are passed by bytes from OS. Python decodes
them with filesystem encoding and "surrogateescape" error handler.
When you need original bytes, you can get it by
``[os.fsencode(arg) for arg in sys.argv]``.
.. _auditing:
.. function:: audit(event, *args)
.. index:: single: auditing
Raise an auditing event and trigger any active auditing hooks.
*event* is a string identifying the event, and *args* may contain
optional arguments with more information about the event. The
number and types of arguments for a given event are considered a
public and stable API and should not be modified between releases.
For example, one auditing event is named ``os.chdir``. This event has
one argument called *path* that will contain the requested new
working directory.
:func:`sys.audit` will call the existing auditing hooks, passing
the event name and arguments, and will re-raise the first exception
from any hook. In general, if an exception is raised, it should not
be handled and the process should be terminated as quickly as
possible. This allows hook implementations to decide how to respond
to particular events: they can merely log the event or abort the
operation by raising an exception.
Hooks are added using the :func:`sys.addaudithook` or
:c:func:`PySys_AddAuditHook` functions.
The native equivalent of this function is :c:func:`PySys_Audit`. Using the
native function is preferred when possible.
See the :ref:`audit events table <audit-events>` for all events raised by
CPython.
.. versionadded:: 3.8
.. data:: base_exec_prefix
Set during Python startup, before ``site.py`` is run, to the same value as
:data:`exec_prefix`. If not running in a
:ref:`virtual environment <venv-def>`, the values will stay the same; if
``site.py`` finds that a virtual environment is in use, the values of
:data:`prefix` and :data:`exec_prefix` will be changed to point to the
virtual environment, whereas :data:`base_prefix` and
:data:`base_exec_prefix` will remain pointing to the base Python
installation (the one which the virtual environment was created from).
.. versionadded:: 3.3
.. data:: base_prefix
Set during Python startup, before ``site.py`` is run, to the same value as
:data:`prefix`. If not running in a :ref:`virtual environment <venv-def>`, the values
will stay the same; if ``site.py`` finds that a virtual environment is in
use, the values of :data:`prefix` and :data:`exec_prefix` will be changed to
point to the virtual environment, whereas :data:`base_prefix` and
:data:`base_exec_prefix` will remain pointing to the base Python
installation (the one which the virtual environment was created from).
.. versionadded:: 3.3
.. data:: byteorder
An indicator of the native byte order. This will have the value ``'big'`` on
big-endian (most-significant byte first) platforms, and ``'little'`` on
little-endian (least-significant byte first) platforms.
.. data:: builtin_module_names
A tuple of strings containing the names of all modules that are compiled into this
Python interpreter. (This information is not available in any other way ---
``modules.keys()`` only lists the imported modules.)
See also the :attr:`sys.stdlib_module_names` list.
.. function:: call_tracing(func, args)
Call ``func(*args)``, while tracing is enabled. The tracing state is saved,
and restored afterwards. This is intended to be called from a debugger from
a checkpoint, to recursively debug some other code.
.. data:: copyright
A string containing the copyright pertaining to the Python interpreter.
.. function:: _clear_type_cache()
Clear the internal type cache. The type cache is used to speed up attribute
and method lookups. Use the function *only* to drop unnecessary references
during reference leak debugging.
This function should be used for internal and specialized purposes only.
.. function:: _current_frames()
Return a dictionary mapping each thread's identifier to the topmost stack frame
currently active in that thread at the time the function is called. Note that
functions in the :mod:`traceback` module can build the call stack given such a
frame.
This is most useful for debugging deadlock: this function does not require the
deadlocked threads' cooperation, and such threads' call stacks are frozen for as
long as they remain deadlocked. The frame returned for a non-deadlocked thread
may bear no relationship to that thread's current activity by the time calling
code examines the frame.
This function should be used for internal and specialized purposes only.
.. audit-event:: sys._current_frames "" sys._current_frames
.. function:: _current_exceptions()
Return a dictionary mapping each thread's identifier to the topmost exception
currently active in that thread at the time the function is called.
If a thread is not currently handling an exception, it is not included in
the result dictionary.
This is most useful for statistical profiling.
This function should be used for internal and specialized purposes only.
.. audit-event:: sys._current_exceptions "" sys._current_exceptions
.. function:: breakpointhook()
This hook function is called by built-in :func:`breakpoint`. By default,
it drops you into the :mod:`pdb` debugger, but it can be set to any other
function so that you can choose which debugger gets used.
The signature of this function is dependent on what it calls. For example,
the default binding (e.g. ``pdb.set_trace()``) expects no arguments, but
you might bind it to a function that expects additional arguments
(positional and/or keyword). The built-in ``breakpoint()`` function passes
its ``*args`` and ``**kws`` straight through. Whatever
``breakpointhooks()`` returns is returned from ``breakpoint()``.
The default implementation first consults the environment variable
:envvar:`PYTHONBREAKPOINT`. If that is set to ``"0"`` then this function
returns immediately; i.e. it is a no-op. If the environment variable is
not set, or is set to the empty string, ``pdb.set_trace()`` is called.
Otherwise this variable should name a function to run, using Python's
dotted-import nomenclature, e.g. ``package.subpackage.module.function``.
In this case, ``package.subpackage.module`` would be imported and the
resulting module must have a callable named ``function()``. This is run,
passing in ``*args`` and ``**kws``, and whatever ``function()`` returns,
``sys.breakpointhook()`` returns to the built-in :func:`breakpoint`
function.
Note that if anything goes wrong while importing the callable named by
:envvar:`PYTHONBREAKPOINT`, a :exc:`RuntimeWarning` is reported and the
breakpoint is ignored.
Also note that if ``sys.breakpointhook()`` is overridden programmatically,
:envvar:`PYTHONBREAKPOINT` is *not* consulted.
.. versionadded:: 3.7
.. function:: _debugmallocstats()
Print low-level information to stderr about the state of CPython's memory
allocator.
If Python is :ref:`built in debug mode <debug-build>` (:option:`configure
--with-pydebug option <--with-pydebug>`), it also performs some expensive
internal consistency checks.
.. versionadded:: 3.3
.. impl-detail::
This function is specific to CPython. The exact output format is not
defined here, and may change.
.. data:: dllhandle
Integer specifying the handle of the Python DLL.
.. availability:: Windows.
.. function:: displayhook(value)
If *value* is not ``None``, this function prints ``repr(value)`` to
``sys.stdout``, and saves *value* in ``builtins._``. If ``repr(value)`` is
not encodable to ``sys.stdout.encoding`` with ``sys.stdout.errors`` error
handler (which is probably ``'strict'``), encode it to
``sys.stdout.encoding`` with ``'backslashreplace'`` error handler.
``sys.displayhook`` is called on the result of evaluating an :term:`expression`
entered in an interactive Python session. The display of these values can be
customized by assigning another one-argument function to ``sys.displayhook``.
Pseudo-code::
def displayhook(value):
if value is None:
return
# Set '_' to None to avoid recursion
builtins._ = None
text = repr(value)
try:
sys.stdout.write(text)
except UnicodeEncodeError:
bytes = text.encode(sys.stdout.encoding, 'backslashreplace')
if hasattr(sys.stdout, 'buffer'):
sys.stdout.buffer.write(bytes)
else:
text = bytes.decode(sys.stdout.encoding, 'strict')
sys.stdout.write(text)
sys.stdout.write("\n")
builtins._ = value
.. versionchanged:: 3.2
Use ``'backslashreplace'`` error handler on :exc:`UnicodeEncodeError`.
.. data:: dont_write_bytecode
If this is true, Python won't try to write ``.pyc`` files on the
import of source modules. This value is initially set to ``True`` or
``False`` depending on the :option:`-B` command line option and the
:envvar:`PYTHONDONTWRITEBYTECODE` environment variable, but you can set it
yourself to control bytecode file generation.
.. data:: _emscripten_info
A :term:`named tuple` holding information about the environment on the
*wasm32-emscripten* platform. The named tuple is provisional and may change
in the future.
.. tabularcolumns:: |l|L|
+-----------------------------+----------------------------------------------+
| Attribute | Explanation |
+=============================+==============================================+
| :const:`emscripten_version` | Emscripten version as tuple of ints |
| | (major, minor, micro), e.g. ``(3, 1, 8)``. |
+-----------------------------+----------------------------------------------+
| :const:`runtime` | Runtime string, e.g. browser user agent, |
| | ``'Node.js v14.18.2'``, or ``'UNKNOWN'``. |
+-----------------------------+----------------------------------------------+
| :const:`pthreads` | ``True`` if Python is compiled with |
| | Emscripten pthreads support. |
+-----------------------------+----------------------------------------------+
| :const:`shared_memory` | ``True`` if Python is compiled with shared |
| | memory support. |
+-----------------------------+----------------------------------------------+
.. availability:: Emscripten.
.. versionadded:: 3.11
.. data:: pycache_prefix
If this is set (not ``None``), Python will write bytecode-cache ``.pyc``
files to (and read them from) a parallel directory tree rooted at this
directory, rather than from ``__pycache__`` directories in the source code
tree. Any ``__pycache__`` directories in the source code tree will be ignored
and new ``.pyc`` files written within the pycache prefix. Thus if you use
:mod:`compileall` as a pre-build step, you must ensure you run it with the
same pycache prefix (if any) that you will use at runtime.
A relative path is interpreted relative to the current working directory.
This value is initially set based on the value of the :option:`-X`
``pycache_prefix=PATH`` command-line option or the
:envvar:`PYTHONPYCACHEPREFIX` environment variable (command-line takes
precedence). If neither are set, it is ``None``.
.. versionadded:: 3.8
.. function:: excepthook(type, value, traceback)
This function prints out a given traceback and exception to ``sys.stderr``.
When an exception is raised and uncaught, the interpreter calls
``sys.excepthook`` with three arguments, the exception class, exception
instance, and a traceback object. In an interactive session this happens just
before control is returned to the prompt; in a Python program this happens just
before the program exits. The handling of such top-level exceptions can be
customized by assigning another three-argument function to ``sys.excepthook``.
.. audit-event:: sys.excepthook hook,type,value,traceback sys.excepthook
Raise an auditing event ``sys.excepthook`` with arguments ``hook``,
``type``, ``value``, ``traceback`` when an uncaught exception occurs.
If no hook has been set, ``hook`` may be ``None``. If any hook raises
an exception derived from :class:`RuntimeError` the call to the hook will
be suppressed. Otherwise, the audit hook exception will be reported as
unraisable and ``sys.excepthook`` will be called.
.. seealso::
The :func:`sys.unraisablehook` function handles unraisable exceptions
and the :func:`threading.excepthook` function handles exception raised
by :func:`threading.Thread.run`.
.. data:: __breakpointhook__
__displayhook__
__excepthook__
__unraisablehook__
These objects contain the original values of ``breakpointhook``,
``displayhook``, ``excepthook``, and ``unraisablehook`` at the start of the
program. They are saved so that ``breakpointhook``, ``displayhook`` and
``excepthook``, ``unraisablehook`` can be restored in case they happen to
get replaced with broken or alternative objects.
.. versionadded:: 3.7
__breakpointhook__
.. versionadded:: 3.8
__unraisablehook__
.. function:: exception()
This function, when called while an exception handler is executing (such as
an ``except`` or ``except*`` clause), returns the exception instance that
was caught by this handler. When exception handlers are nested within one
another, only the exception handled by the innermost handler is accessible.
If no exception handler is executing, this function returns ``None``.
.. versionadded:: 3.11
.. function:: exc_info()
This function returns the old-style representation of the handled
exception. If an exception ``e`` is currently handled (so
:func:`exception` would return ``e``), :func:`exc_info` returns the
tuple ``(type(e), e, e.__traceback__)``.
That is, a tuple containing the type of the exception (a subclass of
:exc:`BaseException`), the exception itself, and a :ref:`traceback
object <traceback-objects>` which typically encapsulates the call
stack at the point where the exception last occurred.
.. index:: object: traceback
If no exception is being handled anywhere on the stack, this function
return a tuple containing three ``None`` values.
.. versionchanged:: 3.11
The ``type`` and ``traceback`` fields are now derived from the ``value``
(the exception instance), so when an exception is modified while it is
being handled, the changes are reflected in the results of subsequent
calls to :func:`exc_info`.
.. data:: exec_prefix
A string giving the site-specific directory prefix where the platform-dependent
Python files are installed; by default, this is also ``'/usr/local'``. This can
be set at build time with the ``--exec-prefix`` argument to the
:program:`configure` script. Specifically, all configuration files (e.g. the
:file:`pyconfig.h` header file) are installed in the directory
:file:`{exec_prefix}/lib/python{X.Y}/config`, and shared library modules are
installed in :file:`{exec_prefix}/lib/python{X.Y}/lib-dynload`, where *X.Y*
is the version number of Python, for example ``3.2``.
.. note::
If a :ref:`virtual environment <venv-def>` is in effect, this
value will be changed in ``site.py`` to point to the virtual environment.
The value for the Python installation will still be available, via
:data:`base_exec_prefix`.
.. data:: executable
A string giving the absolute path of the executable binary for the Python
interpreter, on systems where this makes sense. If Python is unable to retrieve
the real path to its executable, :data:`sys.executable` will be an empty string
or ``None``.
.. function:: exit([arg])
Raise a :exc:`SystemExit` exception, signaling an intention to exit the interpreter.
The optional argument *arg* can be an integer giving the exit status
(defaulting to zero), or another type of object. If it is an integer, zero
is considered "successful termination" and any nonzero value is considered
"abnormal termination" by shells and the like. Most systems require it to be
in the range 0--127, and produce undefined results otherwise. Some systems
have a convention for assigning specific meanings to specific exit codes, but
these are generally underdeveloped; Unix programs generally use 2 for command
line syntax errors and 1 for all other kind of errors. If another type of
object is passed, ``None`` is equivalent to passing zero, and any other
object is printed to :data:`stderr` and results in an exit code of 1. In
particular, ``sys.exit("some error message")`` is a quick way to exit a
program when an error occurs.
Since :func:`exit` ultimately "only" raises an exception, it will only exit
the process when called from the main thread, and the exception is not
intercepted. Cleanup actions specified by finally clauses of :keyword:`try` statements
are honored, and it is possible to intercept the exit attempt at an outer level.
.. versionchanged:: 3.6
If an error occurs in the cleanup after the Python interpreter
has caught :exc:`SystemExit` (such as an error flushing buffered data
in the standard streams), the exit status is changed to 120.
.. data:: flags
The :term:`named tuple` *flags* exposes the status of command line
flags. The attributes are read only.
============================= ==============================================================================================================
attribute flag
============================= ==============================================================================================================
:const:`debug` :option:`-d`
:const:`inspect` :option:`-i`
:const:`interactive` :option:`-i`
:const:`isolated` :option:`-I`
:const:`optimize` :option:`-O` or :option:`-OO`
:const:`dont_write_bytecode` :option:`-B`
:const:`no_user_site` :option:`-s`
:const:`no_site` :option:`-S`
:const:`ignore_environment` :option:`-E`
:const:`verbose` :option:`-v`
:const:`bytes_warning` :option:`-b`
:const:`quiet` :option:`-q`
:const:`hash_randomization` :option:`-R`
:const:`dev_mode` :option:`-X dev <-X>` (:ref:`Python Development Mode <devmode>`)
:const:`utf8_mode` :option:`-X utf8 <-X>`
:const:`safe_path` :option:`-P`
:const:`int_max_str_digits` :option:`-X int_max_str_digits <-X>` (:ref:`integer string conversion length limitation <int_max_str_digits>`)
============================= ==============================================================================================================
.. versionchanged:: 3.2
Added ``quiet`` attribute for the new :option:`-q` flag.
.. versionadded:: 3.2.3
The ``hash_randomization`` attribute.
.. versionchanged:: 3.3
Removed obsolete ``division_warning`` attribute.
.. versionchanged:: 3.4
Added ``isolated`` attribute for :option:`-I` ``isolated`` flag.
.. versionchanged:: 3.7
Added the ``dev_mode`` attribute for the new :ref:`Python Development
Mode <devmode>` and the ``utf8_mode`` attribute for the new :option:`-X`
``utf8`` flag.
.. versionchanged:: 3.11
Added the ``safe_path`` attribute for :option:`-P` option.
.. versionchanged:: 3.11
Added the ``int_max_str_digits`` attribute.
.. data:: float_info
A :term:`named tuple` holding information about the float type. It
contains low level information about the precision and internal
representation. The values correspond to the various floating-point
constants defined in the standard header file :file:`float.h` for the 'C'
programming language; see section 5.2.4.2.2 of the 1999 ISO/IEC C standard
[C99]_, 'Characteristics of floating types', for details.
.. tabularcolumns:: |l|l|L|
+---------------------+----------------+--------------------------------------------------+
| attribute | float.h macro | explanation |
+=====================+================+==================================================+
| :const:`epsilon` | DBL_EPSILON | difference between 1.0 and the least value |
| | | greater than 1.0 that is representable as a float|
| | | |
| | | See also :func:`math.ulp`. |
+---------------------+----------------+--------------------------------------------------+
| :const:`dig` | DBL_DIG | maximum number of decimal digits that can be |
| | | faithfully represented in a float; see below |
+---------------------+----------------+--------------------------------------------------+
| :const:`mant_dig` | DBL_MANT_DIG | float precision: the number of base-``radix`` |
| | | digits in the significand of a float |
+---------------------+----------------+--------------------------------------------------+
| :const:`max` | DBL_MAX | maximum representable positive finite float |
+---------------------+----------------+--------------------------------------------------+
| :const:`max_exp` | DBL_MAX_EXP | maximum integer *e* such that ``radix**(e-1)`` is|
| | | a representable finite float |
+---------------------+----------------+--------------------------------------------------+
| :const:`max_10_exp` | DBL_MAX_10_EXP | maximum integer *e* such that ``10**e`` is in the|
| | | range of representable finite floats |
+---------------------+----------------+--------------------------------------------------+
| :const:`min` | DBL_MIN | minimum representable positive *normalized* float|
| | | |
| | | Use :func:`math.ulp(0.0) <math.ulp>` to get the |
| | | smallest positive *denormalized* representable |
| | | float. |
+---------------------+----------------+--------------------------------------------------+
| :const:`min_exp` | DBL_MIN_EXP | minimum integer *e* such that ``radix**(e-1)`` is|
| | | a normalized float |
+---------------------+----------------+--------------------------------------------------+
| :const:`min_10_exp` | DBL_MIN_10_EXP | minimum integer *e* such that ``10**e`` is a |
| | | normalized float |
+---------------------+----------------+--------------------------------------------------+
| :const:`radix` | FLT_RADIX | radix of exponent representation |
+---------------------+----------------+--------------------------------------------------+
| :const:`rounds` | FLT_ROUNDS | integer constant representing the rounding mode |
| | | used for arithmetic operations. This reflects |
| | | the value of the system FLT_ROUNDS macro at |
| | | interpreter startup time. See section 5.2.4.2.2 |
| | | of the C99 standard for an explanation of the |
| | | possible values and their meanings. |
+---------------------+----------------+--------------------------------------------------+
The attribute :attr:`sys.float_info.dig` needs further explanation. If
``s`` is any string representing a decimal number with at most
:attr:`sys.float_info.dig` significant digits, then converting ``s`` to a
float and back again will recover a string representing the same decimal
value::
>>> import sys
>>> sys.float_info.dig
15
>>> s = '3.14159265358979' # decimal string with 15 significant digits
>>> format(float(s), '.15g') # convert to float and back -> same value
'3.14159265358979'
But for strings with more than :attr:`sys.float_info.dig` significant digits,
this isn't always true::
>>> s = '9876543211234567' # 16 significant digits is too many!
>>> format(float(s), '.16g') # conversion changes value
'9876543211234568'
.. data:: float_repr_style
A string indicating how the :func:`repr` function behaves for
floats. If the string has value ``'short'`` then for a finite
float ``x``, ``repr(x)`` aims to produce a short string with the
property that ``float(repr(x)) == x``. This is the usual behaviour
in Python 3.1 and later. Otherwise, ``float_repr_style`` has value
``'legacy'`` and ``repr(x)`` behaves in the same way as it did in
versions of Python prior to 3.1.
.. versionadded:: 3.1
.. function:: getallocatedblocks()
Return the number of memory blocks currently allocated by the interpreter,
regardless of their size. This function is mainly useful for tracking
and debugging memory leaks. Because of the interpreter's internal
caches, the result can vary from call to call; you may have to call
:func:`_clear_type_cache()` and :func:`gc.collect()` to get more
predictable results.
If a Python build or implementation cannot reasonably compute this
information, :func:`getallocatedblocks()` is allowed to return 0 instead.
.. versionadded:: 3.4
.. function:: getandroidapilevel()
Return the build time API version of Android as an integer.
.. availability:: Android.
.. versionadded:: 3.7
.. function:: getdefaultencoding()
Return the name of the current default string encoding used by the Unicode
implementation.
.. function:: getdlopenflags()
Return the current value of the flags that are used for
:c:func:`dlopen` calls. Symbolic names for the flag values can be
found in the :mod:`os` module (``RTLD_xxx`` constants, e.g.
:data:`os.RTLD_LAZY`).
.. availability:: Unix.
.. function:: getfilesystemencoding()
Get the :term:`filesystem encoding <filesystem encoding and error handler>`:
the encoding used with the :term:`filesystem error handler <filesystem
encoding and error handler>` to convert between Unicode filenames and bytes
filenames. The filesystem error handler is returned from
:func:`getfilesystemencoding`.
For best compatibility, str should be used for filenames in all cases,
although representing filenames as bytes is also supported. Functions
accepting or returning filenames should support either str or bytes and
internally convert to the system's preferred representation.
:func:`os.fsencode` and :func:`os.fsdecode` should be used to ensure that
the correct encoding and errors mode are used.
The :term:`filesystem encoding and error handler` are configured at Python
startup by the :c:func:`PyConfig_Read` function: see
:c:member:`~PyConfig.filesystem_encoding` and
:c:member:`~PyConfig.filesystem_errors` members of :c:type:`PyConfig`.
.. versionchanged:: 3.2
:func:`getfilesystemencoding` result cannot be ``None`` anymore.
.. versionchanged:: 3.6
Windows is no longer guaranteed to return ``'mbcs'``. See :pep:`529`
and :func:`_enablelegacywindowsfsencoding` for more information.
.. versionchanged:: 3.7
Return ``'utf-8'`` if the :ref:`Python UTF-8 Mode <utf8-mode>` is
enabled.
.. function:: getfilesystemencodeerrors()
Get the :term:`filesystem error handler <filesystem encoding and error
handler>`: the error handler used with the :term:`filesystem encoding
<filesystem encoding and error handler>` to convert between Unicode
filenames and bytes filenames. The filesystem encoding is returned from
:func:`getfilesystemencoding`.
:func:`os.fsencode` and :func:`os.fsdecode` should be used to ensure that
the correct encoding and errors mode are used.
The :term:`filesystem encoding and error handler` are configured at Python
startup by the :c:func:`PyConfig_Read` function: see
:c:member:`~PyConfig.filesystem_encoding` and
:c:member:`~PyConfig.filesystem_errors` members of :c:type:`PyConfig`.
.. versionadded:: 3.6
.. function:: get_int_max_str_digits()
Returns the current value for the :ref:`integer string conversion length
limitation <int_max_str_digits>`. See also :func:`set_int_max_str_digits`.
.. versionadded:: 3.11
.. function:: getrefcount(object)
Return the reference count of the *object*. The count returned is generally one
higher than you might expect, because it includes the (temporary) reference as
an argument to :func:`getrefcount`.
.. function:: getrecursionlimit()
Return the current value of the recursion limit, the maximum depth of the Python
interpreter stack. This limit prevents infinite recursion from causing an
overflow of the C stack and crashing Python. It can be set by
:func:`setrecursionlimit`.
.. function:: getsizeof(object[, default])
Return the size of an object in bytes. The object can be any type of
object. All built-in objects will return correct results, but this
does not have to hold true for third-party extensions as it is implementation
specific.
Only the memory consumption directly attributed to the object is
accounted for, not the memory consumption of objects it refers to.
If given, *default* will be returned if the object does not provide means to
retrieve the size. Otherwise a :exc:`TypeError` will be raised.
:func:`getsizeof` calls the object's ``__sizeof__`` method and adds an
additional garbage collector overhead if the object is managed by the garbage
collector.
See `recursive sizeof recipe <https://code.activestate.com/recipes/577504>`_
for an example of using :func:`getsizeof` recursively to find the size of
containers and all their contents.
.. function:: getswitchinterval()
Return the interpreter's "thread switch interval"; see
:func:`setswitchinterval`.
.. versionadded:: 3.2
.. function:: _getframe([depth])
Return a frame object from the call stack. If optional integer *depth* is
given, return the frame object that many calls below the top of the stack. If
that is deeper than the call stack, :exc:`ValueError` is raised. The default
for *depth* is zero, returning the frame at the top of the call stack.
.. audit-event:: sys._getframe frame sys._getframe
.. impl-detail::
This function should be used for internal and specialized purposes only.
It is not guaranteed to exist in all implementations of Python.
.. function:: getprofile()
.. index::
single: profile function
single: profiler
Get the profiler function as set by :func:`setprofile`.
.. function:: gettrace()
.. index::
single: trace function
single: debugger
Get the trace function as set by :func:`settrace`.
.. impl-detail::
The :func:`gettrace` function is intended only for implementing debuggers,
profilers, coverage tools and the like. Its behavior is part of the
implementation platform, rather than part of the language definition, and
thus may not be available in all Python implementations.
.. function:: getwindowsversion()
Return a named tuple describing the Windows version
currently running. The named elements are *major*, *minor*,
*build*, *platform*, *service_pack*, *service_pack_minor*,
*service_pack_major*, *suite_mask*, *product_type* and
*platform_version*. *service_pack* contains a string,
*platform_version* a 3-tuple and all other values are
integers. The components can also be accessed by name, so
``sys.getwindowsversion()[0]`` is equivalent to
``sys.getwindowsversion().major``. For compatibility with prior
versions, only the first 5 elements are retrievable by indexing.
*platform* will be :const:`2 (VER_PLATFORM_WIN32_NT)`.
*product_type* may be one of the following values:
+---------------------------------------+---------------------------------+
| Constant | Meaning |
+=======================================+=================================+
| :const:`1 (VER_NT_WORKSTATION)` | The system is a workstation. |
+---------------------------------------+---------------------------------+
| :const:`2 (VER_NT_DOMAIN_CONTROLLER)` | The system is a domain |
| | controller. |
+---------------------------------------+---------------------------------+
| :const:`3 (VER_NT_SERVER)` | The system is a server, but not |
| | a domain controller. |
+---------------------------------------+---------------------------------+
This function wraps the Win32 :c:func:`GetVersionEx` function; see the
Microsoft documentation on :c:func:`OSVERSIONINFOEX` for more information
about these fields.
*platform_version* returns the major version, minor version and
build number of the current operating system, rather than the version that
is being emulated for the process. It is intended for use in logging rather
than for feature detection.
.. note::
*platform_version* derives the version from kernel32.dll which can be of a different
version than the OS version. Please use :mod:`platform` module for achieving accurate
OS version.
.. availability:: Windows.
.. versionchanged:: 3.2
Changed to a named tuple and added *service_pack_minor*,
*service_pack_major*, *suite_mask*, and *product_type*.
.. versionchanged:: 3.6
Added *platform_version*
.. function:: get_asyncgen_hooks()
Returns an *asyncgen_hooks* object, which is similar to a
:class:`~collections.namedtuple` of the form ``(firstiter, finalizer)``,
where *firstiter* and *finalizer* are expected to be either ``None`` or
functions which take an :term:`asynchronous generator iterator` as an
argument, and are used to schedule finalization of an asynchronous
generator by an event loop.
.. versionadded:: 3.6
See :pep:`525` for more details.
.. note::
This function has been added on a provisional basis (see :pep:`411`
for details.)
.. function:: get_coroutine_origin_tracking_depth()
Get the current coroutine origin tracking depth, as set by
:func:`set_coroutine_origin_tracking_depth`.
.. versionadded:: 3.7
.. note::
This function has been added on a provisional basis (see :pep:`411`
for details.) Use it only for debugging purposes.
.. data:: hash_info
A :term:`named tuple` giving parameters of the numeric hash
implementation. For more details about hashing of numeric types, see
:ref:`numeric-hash`.
+---------------------+--------------------------------------------------+
| attribute | explanation |
+=====================+==================================================+
| :const:`width` | width in bits used for hash values |
+---------------------+--------------------------------------------------+
| :const:`modulus` | prime modulus P used for numeric hash scheme |
+---------------------+--------------------------------------------------+
| :const:`inf` | hash value returned for a positive infinity |
+---------------------+--------------------------------------------------+
| :const:`nan` | (this attribute is no longer used) |
+---------------------+--------------------------------------------------+
| :const:`imag` | multiplier used for the imaginary part of a |
| | complex number |
+---------------------+--------------------------------------------------+
| :const:`algorithm` | name of the algorithm for hashing of str, bytes, |
| | and memoryview |
+---------------------+--------------------------------------------------+
| :const:`hash_bits` | internal output size of the hash algorithm |
+---------------------+--------------------------------------------------+
| :const:`seed_bits` | size of the seed key of the hash algorithm |
+---------------------+--------------------------------------------------+
.. versionadded:: 3.2
.. versionchanged:: 3.4
Added *algorithm*, *hash_bits* and *seed_bits*
.. data:: hexversion
The version number encoded as a single integer. This is guaranteed to increase
with each version, including proper support for non-production releases. For
example, to test that the Python interpreter is at least version 1.5.2, use::
if sys.hexversion >= 0x010502F0:
# use some advanced feature
...
else:
# use an alternative implementation or warn the user
...
This is called ``hexversion`` since it only really looks meaningful when viewed
as the result of passing it to the built-in :func:`hex` function. The
:term:`named tuple` :data:`sys.version_info` may be used for a more
human-friendly encoding of the same information.
More details of ``hexversion`` can be found at :ref:`apiabiversion`.
.. data:: implementation
An object containing information about the implementation of the
currently running Python interpreter. The following attributes are
required to exist in all Python implementations.
*name* is the implementation's identifier, e.g. ``'cpython'``. The actual
string is defined by the Python implementation, but it is guaranteed to be
lower case.
*version* is a named tuple, in the same format as
:data:`sys.version_info`. It represents the version of the Python
*implementation*. This has a distinct meaning from the specific
version of the Python *language* to which the currently running
interpreter conforms, which ``sys.version_info`` represents. For
example, for PyPy 1.8 ``sys.implementation.version`` might be
``sys.version_info(1, 8, 0, 'final', 0)``, whereas ``sys.version_info``
would be ``sys.version_info(2, 7, 2, 'final', 0)``. For CPython they
are the same value, since it is the reference implementation.
*hexversion* is the implementation version in hexadecimal format, like
:data:`sys.hexversion`.
*cache_tag* is the tag used by the import machinery in the filenames of
cached modules. By convention, it would be a composite of the
implementation's name and version, like ``'cpython-33'``. However, a
Python implementation may use some other value if appropriate. If
``cache_tag`` is set to ``None``, it indicates that module caching should
be disabled.
:data:`sys.implementation` may contain additional attributes specific to
the Python implementation. These non-standard attributes must start with
an underscore, and are not described here. Regardless of its contents,
:data:`sys.implementation` will not change during a run of the interpreter,
nor between implementation versions. (It may change between Python
language versions, however.) See :pep:`421` for more information.
.. versionadded:: 3.3
.. note::
The addition of new required attributes must go through the normal PEP
process. See :pep:`421` for more information.
.. data:: int_info
A :term:`named tuple` that holds information about Python's internal
representation of integers. The attributes are read only.
.. tabularcolumns:: |l|L|
+----------------------------------------+-----------------------------------------------+
| Attribute | Explanation |
+========================================+===============================================+
| :const:`bits_per_digit` | number of bits held in each digit. Python |
| | integers are stored internally in base |
| | ``2**int_info.bits_per_digit`` |
+----------------------------------------+-----------------------------------------------+
| :const:`sizeof_digit` | size in bytes of the C type used to |
| | represent a digit |
+----------------------------------------+-----------------------------------------------+
| :const:`default_max_str_digits` | default value for |
| | :func:`sys.get_int_max_str_digits` when it |
| | is not otherwise explicitly configured. |
+----------------------------------------+-----------------------------------------------+
| :const:`str_digits_check_threshold` | minimum non-zero value for |
| | :func:`sys.set_int_max_str_digits`, |
| | :envvar:`PYTHONINTMAXSTRDIGITS`, or |
| | :option:`-X int_max_str_digits <-X>`. |
+----------------------------------------+-----------------------------------------------+
.. versionadded:: 3.1
.. versionchanged:: 3.11
Added ``default_max_str_digits`` and ``str_digits_check_threshold``.
.. data:: __interactivehook__
When this attribute exists, its value is automatically called (with no
arguments) when the interpreter is launched in :ref:`interactive mode
<tut-interactive>`. This is done after the :envvar:`PYTHONSTARTUP` file is
read, so that you can set this hook there. The :mod:`site` module
:ref:`sets this <rlcompleter-config>`.
.. audit-event:: cpython.run_interactivehook hook sys.__interactivehook__
Raises an :ref:`auditing event <auditing>`
``cpython.run_interactivehook`` with the hook object as the argument when
the hook is called on startup.
.. versionadded:: 3.4
.. function:: intern(string)
Enter *string* in the table of "interned" strings and return the interned string
-- which is *string* itself or a copy. Interning strings is useful to gain a
little performance on dictionary lookup -- if the keys in a dictionary are
interned, and the lookup key is interned, the key comparisons (after hashing)
can be done by a pointer compare instead of a string compare. Normally, the
names used in Python programs are automatically interned, and the dictionaries
used to hold module, class or instance attributes have interned keys.
Interned strings are not immortal; you must keep a reference to the return
value of :func:`intern` around to benefit from it.
.. function:: is_finalizing()
Return :const:`True` if the Python interpreter is
:term:`shutting down <interpreter shutdown>`, :const:`False` otherwise.
.. versionadded:: 3.5
.. data:: last_type
last_value
last_traceback
These three variables are not always defined; they are set when an exception is
not handled and the interpreter prints an error message and a stack traceback.
Their intended use is to allow an interactive user to import a debugger module
and engage in post-mortem debugging without having to re-execute the command
that caused the error. (Typical use is ``import pdb; pdb.pm()`` to enter the
post-mortem debugger; see :mod:`pdb` module for
more information.)
The meaning of the variables is the same as that of the return values from
:func:`exc_info` above.
.. data:: maxsize
An integer giving the maximum value a variable of type :c:type:`Py_ssize_t` can
take. It's usually ``2**31 - 1`` on a 32-bit platform and ``2**63 - 1`` on a
64-bit platform.
.. data:: maxunicode
An integer giving the value of the largest Unicode code point,
i.e. ``1114111`` (``0x10FFFF`` in hexadecimal).
.. versionchanged:: 3.3
Before :pep:`393`, ``sys.maxunicode`` used to be either ``0xFFFF``
or ``0x10FFFF``, depending on the configuration option that specified
whether Unicode characters were stored as UCS-2 or UCS-4.
.. data:: meta_path
A list of :term:`meta path finder` objects that have their
:meth:`~importlib.abc.MetaPathFinder.find_spec` methods called to see if one
of the objects can find the module to be imported. By default, it holds entries
that implement Python's default import semantics. The
:meth:`~importlib.abc.MetaPathFinder.find_spec` method is called with at
least the absolute name of the module being imported. If the module to be
imported is contained in a package, then the parent package's :attr:`__path__`
attribute is passed in as a second argument. The method returns a
:term:`module spec`, or ``None`` if the module cannot be found.
.. seealso::
:class:`importlib.abc.MetaPathFinder`
The abstract base class defining the interface of finder objects on
:data:`meta_path`.
:class:`importlib.machinery.ModuleSpec`
The concrete class which
:meth:`~importlib.abc.MetaPathFinder.find_spec` should return
instances of.
.. versionchanged:: 3.4
:term:`Module specs <module spec>` were introduced in Python 3.4, by
:pep:`451`. Earlier versions of Python looked for a method called
:meth:`~importlib.abc.MetaPathFinder.find_module`.
This is still called as a fallback if a :data:`meta_path` entry doesn't
have a :meth:`~importlib.abc.MetaPathFinder.find_spec` method.
.. data:: modules
This is a dictionary that maps module names to modules which have already been
loaded. This can be manipulated to force reloading of modules and other tricks.
However, replacing the dictionary will not necessarily work as expected and
deleting essential items from the dictionary may cause Python to fail. If
you want to iterate over this global dictionary always use
``sys.modules.copy()`` or ``tuple(sys.modules)`` to avoid exceptions as its
size may change during iteration as a side effect of code or activity in
other threads.
.. data:: orig_argv
The list of the original command line arguments passed to the Python
executable.
See also :data:`sys.argv`.
.. versionadded:: 3.10
.. data:: path
.. index:: triple: module; search; path
A list of strings that specifies the search path for modules. Initialized from
the environment variable :envvar:`PYTHONPATH`, plus an installation-dependent
default.
By default, as initialized upon program startup, a potentially unsafe path
is prepended to :data:`sys.path` (*before* the entries inserted as a result
of :envvar:`PYTHONPATH`):
* ``python -m module`` command line: prepend the current working
directory.
* ``python script.py`` command line: prepend the script's directory.
If it's a symbolic link, resolve symbolic links.
* ``python -c code`` and ``python`` (REPL) command lines: prepend an empty
string, which means the current working directory.
To not prepend this potentially unsafe path, use the :option:`-P` command
line option or the :envvar:`PYTHONSAFEPATH` environment variable.
A program is free to modify this list for its own purposes. Only strings
should be added to :data:`sys.path`; all other data types are
ignored during import.
.. seealso::
* Module :mod:`site` This describes how to use .pth files to
extend :data:`sys.path`.
.. data:: path_hooks
A list of callables that take a path argument to try to create a
:term:`finder` for the path. If a finder can be created, it is to be
returned by the callable, else raise :exc:`ImportError`.
Originally specified in :pep:`302`.
.. data:: path_importer_cache
A dictionary acting as a cache for :term:`finder` objects. The keys are
paths that have been passed to :data:`sys.path_hooks` and the values are
the finders that are found. If a path is a valid file system path but no
finder is found on :data:`sys.path_hooks` then ``None`` is
stored.
Originally specified in :pep:`302`.
.. versionchanged:: 3.3
``None`` is stored instead of :class:`imp.NullImporter` when no finder
is found.
.. data:: platform
This string contains a platform identifier that can be used to append
platform-specific components to :data:`sys.path`, for instance.
For Unix systems, except on Linux and AIX, this is the lowercased OS name as
returned by ``uname -s`` with the first part of the version as returned by
``uname -r`` appended, e.g. ``'sunos5'`` or ``'freebsd8'``, *at the time
when Python was built*. Unless you want to test for a specific system
version, it is therefore recommended to use the following idiom::
if sys.platform.startswith('freebsd'):
# FreeBSD-specific code here...
elif sys.platform.startswith('linux'):
# Linux-specific code here...
elif sys.platform.startswith('aix'):
# AIX-specific code here...
For other systems, the values are:
================ ===========================
System ``platform`` value
================ ===========================
AIX ``'aix'``
Emscripten ``'emscripten'``
Linux ``'linux'``
WASI ``'wasi'``
Windows ``'win32'``
Windows/Cygwin ``'cygwin'``
macOS ``'darwin'``
================ ===========================
.. versionchanged:: 3.3
On Linux, :attr:`sys.platform` doesn't contain the major version anymore.
It is always ``'linux'``, instead of ``'linux2'`` or ``'linux3'``. Since
older Python versions include the version number, it is recommended to
always use the ``startswith`` idiom presented above.
.. versionchanged:: 3.8
On AIX, :attr:`sys.platform` doesn't contain the major version anymore.
It is always ``'aix'``, instead of ``'aix5'`` or ``'aix7'``. Since
older Python versions include the version number, it is recommended to
always use the ``startswith`` idiom presented above.
.. seealso::
:attr:`os.name` has a coarser granularity. :func:`os.uname` gives
system-dependent version information.
The :mod:`platform` module provides detailed checks for the
system's identity.
.. data:: platlibdir
Name of the platform-specific library directory. It is used to build the
path of standard library and the paths of installed extension modules.
It is equal to ``"lib"`` on most platforms. On Fedora and SuSE, it is equal
to ``"lib64"`` on 64-bit platforms which gives the following ``sys.path``
paths (where ``X.Y`` is the Python ``major.minor`` version):
* ``/usr/lib64/pythonX.Y/``:
Standard library (like ``os.py`` of the :mod:`os` module)
* ``/usr/lib64/pythonX.Y/lib-dynload/``:
C extension modules of the standard library (like the :mod:`errno` module,
the exact filename is platform specific)
* ``/usr/lib/pythonX.Y/site-packages/`` (always use ``lib``, not
:data:`sys.platlibdir`): Third-party modules
* ``/usr/lib64/pythonX.Y/site-packages/``:
C extension modules of third-party packages
.. versionadded:: 3.9
.. data:: prefix
A string giving the site-specific directory prefix where the platform
independent Python files are installed; on Unix, the default is
``'/usr/local'``. This can be set at build time with the ``--prefix``
argument to the :program:`configure` script. See
:ref:`installation_paths` for derived paths.
.. note:: If a :ref:`virtual environment <venv-def>` is in effect, this
value will be changed in ``site.py`` to point to the virtual
environment. The value for the Python installation will still be
available, via :data:`base_prefix`.
.. data:: ps1
ps2
.. index::
single: interpreter prompts
single: prompts, interpreter
single: >>>; interpreter prompt
single: ...; interpreter prompt
Strings specifying the primary and secondary prompt of the interpreter. These
are only defined if the interpreter is in interactive mode. Their initial
values in this case are ``'>>> '`` and ``'... '``. If a non-string object is
assigned to either variable, its :func:`str` is re-evaluated each time the
interpreter prepares to read a new interactive command; this can be used to
implement a dynamic prompt.
.. function:: setdlopenflags(n)
Set the flags used by the interpreter for :c:func:`dlopen` calls, such as when
the interpreter loads extension modules. Among other things, this will enable a
lazy resolving of symbols when importing a module, if called as
``sys.setdlopenflags(0)``. To share symbols across extension modules, call as
``sys.setdlopenflags(os.RTLD_GLOBAL)``. Symbolic names for the flag values
can be found in the :mod:`os` module (``RTLD_xxx`` constants, e.g.
:data:`os.RTLD_LAZY`).
.. availability:: Unix.
.. function:: set_int_max_str_digits(maxdigits)
Set the :ref:`integer string conversion length limitation
<int_max_str_digits>` used by this interpreter. See also
:func:`get_int_max_str_digits`.
.. versionadded:: 3.11
.. function:: setprofile(profilefunc)
.. index::
single: profile function
single: profiler
Set the system's profile function, which allows you to implement a Python source
code profiler in Python. See chapter :ref:`profile` for more information on the
Python profiler. The system's profile function is called similarly to the
system's trace function (see :func:`settrace`), but it is called with different events,
for example it isn't called for each executed line of code (only on call and return,
but the return event is reported even when an exception has been set). The function is
thread-specific, but there is no way for the profiler to know about context switches between
threads, so it does not make sense to use this in the presence of multiple threads. Also,
its return value is not used, so it can simply return ``None``. Error in the profile
function will cause itself unset.
Profile functions should have three arguments: *frame*, *event*, and
*arg*. *frame* is the current stack frame. *event* is a string: ``'call'``,
``'return'``, ``'c_call'``, ``'c_return'``, or ``'c_exception'``. *arg* depends
on the event type.
.. audit-event:: sys.setprofile "" sys.setprofile
The events have the following meaning:
``'call'``
A function is called (or some other code block entered). The
profile function is called; *arg* is ``None``.
``'return'``
A function (or other code block) is about to return. The profile
function is called; *arg* is the value that will be returned, or ``None``
if the event is caused by an exception being raised.
``'c_call'``
A C function is about to be called. This may be an extension function or
a built-in. *arg* is the C function object.
``'c_return'``
A C function has returned. *arg* is the C function object.
``'c_exception'``
A C function has raised an exception. *arg* is the C function object.
.. function:: setrecursionlimit(limit)
Set the maximum depth of the Python interpreter stack to *limit*. This limit
prevents infinite recursion from causing an overflow of the C stack and crashing
Python.
The highest possible limit is platform-dependent. A user may need to set the
limit higher when they have a program that requires deep recursion and a platform
that supports a higher limit. This should be done with care, because a too-high
limit can lead to a crash.
If the new limit is too low at the current recursion depth, a
:exc:`RecursionError` exception is raised.
.. versionchanged:: 3.5.1
A :exc:`RecursionError` exception is now raised if the new limit is too
low at the current recursion depth.
.. function:: setswitchinterval(interval)
Set the interpreter's thread switch interval (in seconds). This floating-point
value determines the ideal duration of the "timeslices" allocated to
concurrently running Python threads. Please note that the actual value
can be higher, especially if long-running internal functions or methods
are used. Also, which thread becomes scheduled at the end of the interval
is the operating system's decision. The interpreter doesn't have its
own scheduler.
.. versionadded:: 3.2
.. function:: settrace(tracefunc)
.. index::
single: trace function
single: debugger
Set the system's trace function, which allows you to implement a Python
source code debugger in Python. The function is thread-specific; for a
debugger to support multiple threads, it must register a trace function using
:func:`settrace` for each thread being debugged or use :func:`threading.settrace`.
Trace functions should have three arguments: *frame*, *event*, and
*arg*. *frame* is the current stack frame. *event* is a string: ``'call'``,
``'line'``, ``'return'``, ``'exception'`` or ``'opcode'``. *arg* depends on
the event type.
The trace function is invoked (with *event* set to ``'call'``) whenever a new
local scope is entered; it should return a reference to a local trace
function to be used for the new scope, or ``None`` if the scope shouldn't be
traced.
The local trace function should return a reference to itself (or to another
function for further tracing in that scope), or ``None`` to turn off tracing
in that scope.
If there is any error occurred in the trace function, it will be unset, just
like ``settrace(None)`` is called.
The events have the following meaning:
``'call'``
A function is called (or some other code block entered). The
global trace function is called; *arg* is ``None``; the return value
specifies the local trace function.
``'line'``
The interpreter is about to execute a new line of code or re-execute the
condition of a loop. The local trace function is called; *arg* is
``None``; the return value specifies the new local trace function. See
:file:`Objects/lnotab_notes.txt` for a detailed explanation of how this
works.
Per-line events may be disabled for a frame by setting
:attr:`f_trace_lines` to :const:`False` on that frame.
``'return'``
A function (or other code block) is about to return. The local trace
function is called; *arg* is the value that will be returned, or ``None``
if the event is caused by an exception being raised. The trace function's
return value is ignored.
``'exception'``
An exception has occurred. The local trace function is called; *arg* is a
tuple ``(exception, value, traceback)``; the return value specifies the
new local trace function.
``'opcode'``
The interpreter is about to execute a new opcode (see :mod:`dis` for
opcode details). The local trace function is called; *arg* is
``None``; the return value specifies the new local trace function.
Per-opcode events are not emitted by default: they must be explicitly
requested by setting :attr:`f_trace_opcodes` to :const:`True` on the
frame.
Note that as an exception is propagated down the chain of callers, an
``'exception'`` event is generated at each level.
For more fine-grained usage, it's possible to set a trace function by
assigning ``frame.f_trace = tracefunc`` explicitly, rather than relying on
it being set indirectly via the return value from an already installed
trace function. This is also required for activating the trace function on
the current frame, which :func:`settrace` doesn't do. Note that in order
for this to work, a global tracing function must have been installed
with :func:`settrace` in order to enable the runtime tracing machinery,
but it doesn't need to be the same tracing function (e.g. it could be a
low overhead tracing function that simply returns ``None`` to disable
itself immediately on each frame).
For more information on code and frame objects, refer to :ref:`types`.
.. audit-event:: sys.settrace "" sys.settrace
.. impl-detail::
The :func:`settrace` function is intended only for implementing debuggers,
profilers, coverage tools and the like. Its behavior is part of the
implementation platform, rather than part of the language definition, and
thus may not be available in all Python implementations.
.. versionchanged:: 3.7
``'opcode'`` event type added; :attr:`f_trace_lines` and
:attr:`f_trace_opcodes` attributes added to frames
.. function:: set_asyncgen_hooks(firstiter, finalizer)
Accepts two optional keyword arguments which are callables that accept an
:term:`asynchronous generator iterator` as an argument. The *firstiter*
callable will be called when an asynchronous generator is iterated for the
first time. The *finalizer* will be called when an asynchronous generator
is about to be garbage collected.
.. audit-event:: sys.set_asyncgen_hooks_firstiter "" sys.set_asyncgen_hooks
.. audit-event:: sys.set_asyncgen_hooks_finalizer "" sys.set_asyncgen_hooks
Two auditing events are raised because the underlying API consists of two
calls, each of which must raise its own event.
.. versionadded:: 3.6
See :pep:`525` for more details, and for a reference example of a
*finalizer* method see the implementation of
``asyncio.Loop.shutdown_asyncgens`` in
:source:`Lib/asyncio/base_events.py`
.. note::
This function has been added on a provisional basis (see :pep:`411`
for details.)
.. function:: set_coroutine_origin_tracking_depth(depth)
Allows enabling or disabling coroutine origin tracking. When
enabled, the ``cr_origin`` attribute on coroutine objects will
contain a tuple of (filename, line number, function name) tuples
describing the traceback where the coroutine object was created,
with the most recent call first. When disabled, ``cr_origin`` will
be None.
To enable, pass a *depth* value greater than zero; this sets the
number of frames whose information will be captured. To disable,
pass set *depth* to zero.
This setting is thread-specific.
.. versionadded:: 3.7
.. note::
This function has been added on a provisional basis (see :pep:`411`
for details.) Use it only for debugging purposes.
.. function:: _enablelegacywindowsfsencoding()
Changes the :term:`filesystem encoding and error handler` to 'mbcs' and
'replace' respectively, for consistency with versions of Python prior to
3.6.
This is equivalent to defining the :envvar:`PYTHONLEGACYWINDOWSFSENCODING`
environment variable before launching Python.
See also :func:`sys.getfilesystemencoding` and
:func:`sys.getfilesystemencodeerrors`.
.. availability:: Windows.
.. versionadded:: 3.6
See :pep:`529` for more details.
.. data:: stdin
stdout
stderr
:term:`File objects <file object>` used by the interpreter for standard
input, output and errors:
* ``stdin`` is used for all interactive input (including calls to
:func:`input`);
* ``stdout`` is used for the output of :func:`print` and :term:`expression`
statements and for the prompts of :func:`input`;
* The interpreter's own prompts and its error messages go to ``stderr``.
These streams are regular :term:`text files <text file>` like those
returned by the :func:`open` function. Their parameters are chosen as
follows:
* The encoding and error handling are is initialized from
:c:member:`PyConfig.stdio_encoding` and :c:member:`PyConfig.stdio_errors`.
On Windows, UTF-8 is used for the console device. Non-character
devices such as disk files and pipes use the system locale
encoding (i.e. the ANSI codepage). Non-console character
devices such as NUL (i.e. where ``isatty()`` returns ``True``) use the
value of the console input and output codepages at startup,
respectively for stdin and stdout/stderr. This defaults to the
system :term:`locale encoding` if the process is not initially attached
to a console.
The special behaviour of the console can be overridden
by setting the environment variable PYTHONLEGACYWINDOWSSTDIO
before starting Python. In that case, the console codepages are
used as for any other character device.
Under all platforms, you can override the character encoding by
setting the :envvar:`PYTHONIOENCODING` environment variable before
starting Python or by using the new :option:`-X` ``utf8`` command
line option and :envvar:`PYTHONUTF8` environment variable. However,
for the Windows console, this only applies when
:envvar:`PYTHONLEGACYWINDOWSSTDIO` is also set.
* When interactive, the ``stdout`` stream is line-buffered. Otherwise,
it is block-buffered like regular text files. The ``stderr`` stream
is line-buffered in both cases. You can make both streams unbuffered
by passing the :option:`-u` command-line option or setting the
:envvar:`PYTHONUNBUFFERED` environment variable.
.. versionchanged:: 3.9
Non-interactive ``stderr`` is now line-buffered instead of fully
buffered.
.. note::
To write or read binary data from/to the standard streams, use the
underlying binary :data:`~io.TextIOBase.buffer` object. For example, to
write bytes to :data:`stdout`, use ``sys.stdout.buffer.write(b'abc')``.
However, if you are writing a library (and do not control in which
context its code will be executed), be aware that the standard streams
may be replaced with file-like objects like :class:`io.StringIO` which
do not support the :attr:`~io.BufferedIOBase.buffer` attribute.
.. data:: __stdin__
__stdout__
__stderr__
These objects contain the original values of ``stdin``, ``stderr`` and
``stdout`` at the start of the program. They are used during finalization,
and could be useful to print to the actual standard stream no matter if the
``sys.std*`` object has been redirected.
It can also be used to restore the actual files to known working file objects
in case they have been overwritten with a broken object. However, the
preferred way to do this is to explicitly save the previous stream before
replacing it, and restore the saved object.
.. note::
Under some conditions ``stdin``, ``stdout`` and ``stderr`` as well as the
original values ``__stdin__``, ``__stdout__`` and ``__stderr__`` can be
``None``. It is usually the case for Windows GUI apps that aren't connected
to a console and Python apps started with :program:`pythonw`.
.. data:: stdlib_module_names
A frozenset of strings containing the names of standard library modules.
It is the same on all platforms. Modules which are not available on
some platforms and modules disabled at Python build are also listed.
All module kinds are listed: pure Python, built-in, frozen and extension
modules. Test modules are excluded.
For packages, only the main package is listed: sub-packages and sub-modules
are not listed. For example, the ``email`` package is listed, but the
``email.mime`` sub-package and the ``email.message`` sub-module are not
listed.
See also the :attr:`sys.builtin_module_names` list.
.. versionadded:: 3.10
.. data:: thread_info
A :term:`named tuple` holding information about the thread
implementation.
.. tabularcolumns:: |l|p{0.7\linewidth}|
+------------------+---------------------------------------------------------+
| Attribute | Explanation |
+==================+=========================================================+
| :const:`name` | Name of the thread implementation: |
| | |
| | * ``'nt'``: Windows threads |
| | * ``'pthread'``: POSIX threads |
| | * ``'pthread-stubs'``: stub POSIX threads |
| | (on WebAssembly platforms without threading support) |
| | * ``'solaris'``: Solaris threads |
+------------------+---------------------------------------------------------+
| :const:`lock` | Name of the lock implementation: |
| | |
| | * ``'semaphore'``: a lock uses a semaphore |
| | * ``'mutex+cond'``: a lock uses a mutex |
| | and a condition variable |
| | * ``None`` if this information is unknown |
+------------------+---------------------------------------------------------+
| :const:`version` | Name and version of the thread library. It is a string, |
| | or ``None`` if this information is unknown. |
+------------------+---------------------------------------------------------+
.. versionadded:: 3.3
.. data:: tracebacklimit
When this variable is set to an integer value, it determines the maximum number
of levels of traceback information printed when an unhandled exception occurs.
The default is ``1000``. When set to ``0`` or less, all traceback information
is suppressed and only the exception type and value are printed.
.. function:: unraisablehook(unraisable, /)
Handle an unraisable exception.
Called when an exception has occurred but there is no way for Python to
handle it. For example, when a destructor raises an exception or during
garbage collection (:func:`gc.collect`).
The *unraisable* argument has the following attributes:
* *exc_type*: Exception type.
* *exc_value*: Exception value, can be ``None``.
* *exc_traceback*: Exception traceback, can be ``None``.
* *err_msg*: Error message, can be ``None``.
* *object*: Object causing the exception, can be ``None``.
The default hook formats *err_msg* and *object* as:
``f'{err_msg}: {object!r}'``; use "Exception ignored in" error message
if *err_msg* is ``None``.
:func:`sys.unraisablehook` can be overridden to control how unraisable
exceptions are handled.
Storing *exc_value* using a custom hook can create a reference cycle. It
should be cleared explicitly to break the reference cycle when the
exception is no longer needed.
Storing *object* using a custom hook can resurrect it if it is set to an
object which is being finalized. Avoid storing *object* after the custom
hook completes to avoid resurrecting objects.
See also :func:`excepthook` which handles uncaught exceptions.
.. audit-event:: sys.unraisablehook hook,unraisable sys.unraisablehook
Raise an auditing event ``sys.unraisablehook`` with arguments
``hook``, ``unraisable`` when an exception that cannot be handled occurs.
The ``unraisable`` object is the same as what will be passed to the hook.
If no hook has been set, ``hook`` may be ``None``.
.. versionadded:: 3.8
.. data:: version
A string containing the version number of the Python interpreter plus additional
information on the build number and compiler used. This string is displayed
when the interactive interpreter is started. Do not extract version information
out of it, rather, use :data:`version_info` and the functions provided by the
:mod:`platform` module.
.. data:: api_version
The C API version for this interpreter. Programmers may find this useful when
debugging version conflicts between Python and extension modules.
.. data:: version_info
A tuple containing the five components of the version number: *major*, *minor*,
*micro*, *releaselevel*, and *serial*. All values except *releaselevel* are
integers; the release level is ``'alpha'``, ``'beta'``, ``'candidate'``, or
``'final'``. The ``version_info`` value corresponding to the Python version 2.0
is ``(2, 0, 0, 'final', 0)``. The components can also be accessed by name,
so ``sys.version_info[0]`` is equivalent to ``sys.version_info.major``
and so on.
.. versionchanged:: 3.1
Added named component attributes.
.. data:: warnoptions
This is an implementation detail of the warnings framework; do not modify this
value. Refer to the :mod:`warnings` module for more information on the warnings
framework.
.. data:: winver
The version number used to form registry keys on Windows platforms. This is
stored as string resource 1000 in the Python DLL. The value is normally the
major and minor versions of the running Python interpreter. It is provided in the :mod:`sys`
module for informational purposes; modifying this value has no effect on the
registry keys used by Python.
.. availability:: Windows.
.. data:: _xoptions
A dictionary of the various implementation-specific flags passed through
the :option:`-X` command-line option. Option names are either mapped to
their values, if given explicitly, or to :const:`True`. Example:
.. code-block:: shell-session
$ ./python -Xa=b -Xc
Python 3.2a3+ (py3k, Oct 16 2010, 20:14:50)
[GCC 4.4.3] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import sys
>>> sys._xoptions
{'a': 'b', 'c': True}
.. impl-detail::
This is a CPython-specific way of accessing options passed through
:option:`-X`. Other implementations may export them through other
means, or not at all.
.. versionadded:: 3.2
.. rubric:: Citations
.. [C99] ISO/IEC 9899:1999. "Programming languages -- C." A public draft of this standard is available at https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf\ .
Generated by dwww version 1.15 on Sun May 19 01:38:19 CEST 2024.