# PipeWire 0.3.65 (2023-01-26)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Add back the deprecated symbols but make sure a deprecated warning is
emitted for them. This fixes compilation issues in bindings.
- Fix an error in the AVX code that could cause crackling in filter-chain
when using the mixer.
- The convolver in filter-chain can now select an IR from a list of IRs
that best matches the current samplerate. Also resampling of the IR
has been improved.
- A new native module-combine-stream was added. You can use this to create
a 5.1 device from 3 stereo soundcards, for example, or direct the output
to multiple sinks at once.
- Support for Bluetooth MIDI was added. This requires a wireplumber
addition as well.
- An ALSA plugin rule was added to tweak the buffer settings in Davinci
Resolve so that it now runs with acceptable latency. (#1697)
- Support for compress offload was added using tinycompress. This allows
compressed formats to be decoded in hardware using ALSA on some devices.
- Many more buffixes and improvements.
## PipeWire
- Add back the deprecated symbols but make sure a deprecated warning is
emitted for them. (#2952)
- Fix a regression when running older servers and newer clients (such as
flatpaks on older server) where the server would run clients too soon,
causing crashes. (#2964)
- Ensure that environment variables override any config values.
## Tools
- pw-cli has received some improvements in the output.
- pw-cat can now use ffmpeg to demux streams for compress offload.
## modules
- The convolver IR volume is now preserved after resampling.
- Adapter ports can now have a custom prefix.
- module-rt now clamps the realtime priority to the user allowed one if
it is within an acceptable range. Before it would fall back to RTKit
immediately.
- The module-echo-cancel can now have per stream channel layouts which
makes it possible to link to specific audio ports on a device. (#2939)
- Fix an error in the AVX code that could cause crackling in filter-chain
when using the mixer. (#2965)
- The convolver in filter-chain can now select an IR from a list of IRs
that best matches the current sample-rate.
- module-pipe-* now better matches the pulseaudio properties. (#2973)
- A new combine-stream module was added to combine multiple sinks into
one sink. It is also possible to merge multiple sources into one.
- module-rtp-source now has match rules to select what SAP sessions
to stream from. There were also improvements to the buffering and
latency handling.
- module-rtp-sink now handles multicast loopback correctly.
- module-rtp-sink implements min-ptime and max-ptime to control the
send packet latency.
## SPA
- A new modifier flag was added to the video format parser helper to
allow 0 (linear) as a valid modifier. (#2943)
- Params includes were reorganized to make it more scalable. Many compressed
audio formats were added.
- The alsa pcm plugin now handles invalid values from the driver
gracefully. (#2953)
- Fix some potential stuttering cause by wrong scaling and overflow
of the output buffers in audioconvert. (#2680)
- Debug output is now also sent to the log instead of stdout. (#2923)
- A debug context was added to debug macros to implement custom debug
handling. This is used to redirect the debug of pods to the debug log
instead of using some custom duplicated code.
- Fix some warnings for potentially undefined shifts in format
conversion.
- Support for compress offload was added using tinycompress. This is mostly
used on some embedded hardware where decoding of audio formats can be
done in hardware.
## Bluetooth
- Some fixes for LE audio were added.
- Support for Bluetooth MIDI was added. This requires a wireplumber
addition as well.
- Reply OK to empty commands.
- Improve compatibility with some devices that send stray \n such as
the Sennheiser HD 350BT. (#2991)
## pulse-server
- Devices with unsupported formats (by the pulseaudio API) are now also
listed in the pulseaudio API (with invalid formats).
- The native module-combine-stream is used for module-combine-sink.
## JACK
- Make jack.merge-monitor default to true to better match the jack1/2
behaviour. Add an exception for mixxx, which is more usable with
unmerged monitors. (#1760)
## ALSA
- The property handling in the ALSA plugin was improved. alsa.properties
and alsa.rules can now be added to the config file.
- A rule was added to tweak the buffer settings in Davinci Resolve so that
it can run with acceptable latency. (#1697)
- ALSA volume will now also use cubic volumes, like pulseaudio.
- The ALSA ctl plugin now also uses the client-rt.conf file.
- A new alsa.volume-method was added to configure cubic or linear volume.
This can be set per application using the rules.
## GStreamer
- pipewiresrc will now advertize DMABUF support if the pipeline suports
this.
- pipewiresrc will now always be a live source unless told otherwise.
Older versions:
# PipeWire 0.3.64 (2023-01-12)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Clear old buffer memory on ports to fix some SIGBUS errors.
- It is now possible to assign custom port names to the ports from an
adapter. This feature is helpful to those who use a multichannel
interface with long-term connections. This way they can label each
port with its designation, such as an instrument name or anything else
to be displayed in a patchbay or DAW.
- Fix some issues with node suspend and quantum and rate calculations.
- Fix some regressions in pulse-tunnel and RTP-source adaptive resampling
that could cause synchronization problems.
- UCM devices now also have a Pro Audio profile.
- NODE_TARGET (with the object.id) is now deprecated, use TARGET_OBJECT
(with the object.serial, which is not reused and can avoid races).
## PipeWire
- Clear all peer input port buffers when suspending. This fixes some
SIGBUS errors when some plugins were using old memory. (#2914)
- Fix a case where nodes that were not supposed to be suspended, were
kept suspended on a rate change. (#2929)
- Fix an error in the quantum and rate calculations that could cause
nodes to run with wrong quantum and rates when multiple rates were
allowed. (#2925)
## Tools
- pw-dump will now sort dictionaries to make it easier to compare
different outputs.
- Improve output of pw-reserve.
- pw-loopback uses TARGET_OBJECT so you will need to use the serial
id (or better the name) as the target instead of the object id.
## modules
- The filter-chain modules has seen some cleanups, refactoring and
optimizations in the various DSP functions.
- The ROC module now supports setting a custom samplerate.
- ROC 0.2.X is now required.
- The pulse tunnel and RTP source were not updating the rate field
correctly which could cause synchronization problems. (#2891)
- The filter-chain now supports an arbitrary number of control
properties. (#2933)
- It is now possible to assign custom port names to the ports from an
adapter with the PW_KEY_NODE_CHANNELNAMES.
- Support was added for capture and playback props in echo-cancel.
(#2939)
## SPA
- The ACP code now has an option to set the probe samplerate. (#1599)
- UCM devices now also have a Pro Audio profile.
- Filtering of Step ranges is now implemented.
## Pulse-Server
- The channel-map is now set correctly on the echo-cancel module.
- source_master and sink_master are now correctly handled in module
echo-cancel.
- Fix a regression in DRAIN where resuming after a DRAIN would fail.
This caused problems for espeak. (#2928)
- TARGET_OBJECT is now used to make it possible to use the indexes
as a target.
- ladspa-source and remap-source can now also link to monitors.
## ALSA
- The ALSA plugin now handles the target.object correctly when set to
-1. (#2893)
## V4L2
- The v4l2 replacement library now also follows symlinks.
- Support for getting and setting controls was added.
- Support for G_PARM was added.
- The environment variable PIPEWIRE_V4L2_TARGET can be used to force
an application onto a specific camera.
## Bluetooth
- Fix compilation without ldac_abr.
- Fix a missing brace in CIND reply. This could cause some devices to
fail.
- Fix configuration of the initial latency.
## GStreamer
- The device provider now supports setting an fd so that it can connect
to PipeWire sessions from the portal.
- DMABuf support was re-enabled in gstpipewiresrc.
# PipeWire 0.3.63 (2022-12-15)
This is a quick bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix a critical bug that causes audio distortion in some cases when using
AVX2.
- Fix a crash in mpv caused by deinit of PipeWire.
- Resample the convolver IR to match the graph samplerate for better
results.
- Many more small bugfixes and improvements.
## PipeWire
- Fix a segfault in the PipeWire deinit code triggered by mpv in some
cases. (#2881)
- Fix docs about SPA_PLUGIN_DIR.
- Always dlclose by default (even under valgrind). Add an option with
PIPEWIRE_DLCLOSE to select alternative behaviour.
- Improve PIPEWIRE_DEBUG category handling.
## modules
- Resample the IR for the convolver when the IR samplerate and graph rate
don't match.
## SPA
- Handle spurious reads from timerfd gracefully.
- Fix potential stack-use-after-scope when starting Audacity.
- Fix distorted audio when using AVX2. (#2885)
- Remove fallback to default channel map in channelmix.
- Improve sorting of MIDI events, use the same order as Ardour. (#1816)
- Enable LFE downmixing by default. (#2425)
- Make IEC958/AC3 and IEC958/DTS work better by enforcing a fixed minimal
buffering for the encoder to avoid stuttering. (#2650)
## Pulse-Server
- Add a new pulse.cmd config section to execute pulse commands, currently
only for loading modules. This removes the dependency on pactl.
- Improve debug of messages.
# PipeWire 0.3.62 (2022-12-09)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- A regression in screensharing was fixed. It was caused by a race when
activating links and driver nodes.
- Video transform metadata was added so that cameras and screen sharing
can report the video orientation and transformations.
- Support for the PulseAudio module-gsettings was added to make paprefs
work.
- Support for bluetooth offloading was added. This allows for the bluetooth
reception, decoding and playback to happen completely in hardware.
This also requires some support in WirePlumber.
- Many bugfixes and improvements.
## PipeWire
- More work on stopping nodes in a more controlled way.
- Fix a race in starting nodes and drivers. In some cases the driver
node would already be started while the link to the peer node was not
ready yet. This caused regressions in screen sharing. The driver is
now only started after all the followers and links completed.
- Fix a case where a slow capture stream would not recycle buffers
anymore and stall. (#2874)
- Fix a subtle bug in pw_loop_invoke that could cause callbacks to be
delayed and cause crashes in some cases.
- Fix a case where IPC was done from the data-thread and could cause
crashes.
## Tools
- Silence some expected errors in the pw-top output.
## modules
- The filter-chain has seen some optimizations in the copy plugin and
the convolver.
- The zeroconf plugin will now only unpublish services from the server
that was removed.
- Fix a potential crash when stopping pw-loopback.
- Some harmless errors were turned into info messages.
- Fix some cases where pw_stream methods were called from the data-thread
that could cause segfaults. (#2633)
## SPA
- There is now a video transform metadata that indicates how a video
frame was transformed (rotated/flipped). libcamera and the GStreamer
elements now have support for this metadata.
- The SPA volume plugin is now disabled from the default build.
- Handle missing control info in libcamera.
- Handle errors from loop better, don't call the callbacks on errors.
- Somewhat improve performance in some audioconvert AVX2 code for format
conversion.
- Fix PortConfig and EnumPortConfig params in audioconvert and
audioadapter to reflect what is actually going on instead of using
hardcoded values.
- Pass ignore-dB property correctly in all cases.
- Probing is now done in 48KHz again. (#2857)
## Pulse-server
- IPv4 addresses are now added first to the list and exposed first with
zeroconf discover.
- module-gsettings was added to make paprefs work.
- The pulse.idle.timeout option was disabled by default and only enabled
for selected apps (speech-dispatcher) because it caused some problems
for other apps. (#2880)
## JACK
- Only process valid ports. Could fix some crashes. (#2863)
## Bluetooth
- Support was added for offloading bluetooth handling. Some hardware can
receive, decode and play the bluetooth audio directly in hardware.
# PipeWire 0.3.61 (2022-11-24)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix a bug in audioadapter that could cause crashes when switching
bluetooth profiles.
- Fix sound in QEMU, deadbeef and openal again.
- libcamera plugin fixes, dynamic add and remove should now work with
the next wireplumber version.
- Fix a regression in pw-midiplay where the first buffer would not
play and some events would be missing.
- The network module now doesn't export other network sources
anymore.
- pulse-server now detects clients that keep underrunning for a long time
and will pause them to save power.
- Many more bugfixes and improvements.
## PipeWire
- Optimize away some useless graph recalculations.
- Increase alternative sample rates from 16 to 32.
- FreeBSD and musl build fixes.
- Silence some module loading errors when the error can be ignored.
- Fix initial buffer requested size for pw-stream when operating in
async mode. This also indirectly fixes the first buffer in
pw-midiplay. (#2843)
## Modules
- Set the network property on pulse-tunnel streams so that they are
not exported anymore. (#2384)
- Filter-chain has optimized mix functions now.
## SPA
- Handle some errors in libcamera better.
- Fix libcamera remove events. Fix the id allocation for devices.
- Fix a bug in audioadapter where it would not renegotiate after
a port reconfiguration, leading to crashes, especially when
automatically switching profiles in bluetooth. (#2764)
- Do ALSA probing in 44100Hz again. Some devices seem to fail
otherwise for some unknown reason. (#2718)
- Force playback start when the ALSA buffer is full. This fixes sound
in QEMU. (#2830)
- Support Digital 5.1 AC3 for Asus Xonar SE.
- Improve format renegotiation in audioadapter. This makes the ALSA
plugin work again for deadbeef. (#2832)
- Fix latency reporting on adapter DSP ports.
## pulse-server
- Fix a bug where openal based applications would hang. (#2821)
- Improve zeroconf publish. Only publish on the address of the first
running server. This avoids duplicate entries for IPv4 and IPv6.
Add support for republish entries when new servers are started.
- Add a pulse.idle.timeout option (default to 5 seconds) to pause
streams that have been underrunning for this amount of time. Badly
behaving clients will then not keep the graph and device busy so
that devices can be suspended to save battery. This should give
better default behaviour with speech-dispatcher. (#2839)
## JACK
- Add an option to configure the filter character.
- Fix connect_callbacks. It was only called once for output ports.
(#2841)
- Add option to set node.passive on jack clients. Make some quirks
for qsynth to make it suspend and fade out better.
# PipeWire 0.3.60 (2022-11-10)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- The filter-chain now handles errors better and has fixes for many
crasher bugs.
- A new RTP module was added with a sender and receiver. It uses SAP
to announce and consume RTP streams and is compatible with the
PulseAudio RTP modules.
- Many small bluetooth improvements and fixes.
- The alsa plugin will now only start playback when there is data. This
results in better sync and lower latency between capture and playback.
- The v4l2 and libcamera plugins have seen a lot of improvements. They
support control properties now. Also pw-v4l2 has seen many improvements
and mostly passes the v4l2-compliance test now.
- Many more bugfixes and improvements.
## PipeWire
- Code cleanups, compiler warning fixes.
- Add some extra checks to avoid scheduling an inactive node.
- Rework the sequence of events to start and stop nodes.
- Improve param enumeration.
- An option was added to give priority to the Buffer params of the
consumer. This makes it possible to use the default values of the
consumer (instead of the producer) when capturing from a source.
- The graph rate selection was improved to pick a rate closest to the
requested one (instead of picking the default).
## Modules
- Fix some crashes in filter-chain. (#2737)
- X11 Bell module will now be loaded by default when available.
- A new RTP module was added with a sender and receiver. It uses SAP
to announce and consume RTP streams and is compatible with the
PulseAudio RTP modules.
- Improve RAOP compatibility.
- The echo-cancel module now uses the resampler prefill option to align
input and output samples without buffering. Better latency control
when starting and stopping has been implemented.
- The pulse tunnel will now write aligned samples to pulseaudio even
when the ringbuffer wraps around. This fixes playback issues with
multichannel sinks.
- Add a delay option to module-loopback using a ringbuffer.
- Implement echo-cancel params.
- The filter-chain module has better error reporting.
- The LADSPA search path was extended with some more common paths.
- The echo-canceler input can now also be a monitor of a sink. This
improves compatibility with some proton games that expect a real
sink instead of a virtual one.
## Tools
- Better error reporting in pw-link.
- pw-top now also shows IEC958 passthrough formats and JPEG/H264 video
formats.
- pw-top refreshes the screen faster.
- pw-top now prints the state of the node and shows less info for
inactive nodes.
- pw-dump now uses the new seq field in the spa_param_info to discard
old param updates and avoid duplicate params in the output.
## Bluetooth
- Add ModemManager support in the native backend.
- Clean up GetManagedObjects handling.
- Handle QoS from the endpoints in the codec.
- Increase the socket buffer to have more control over the rate and QoS.
- Simplify the packet flushing code.
- Stop processing nodes before destroying them.
- Fix timers when a source switches drivers.
- Codecs can now share endpoints. This reduces the amount of endpoints and
avoids problems with devices that can't handle a large amount of
codec endpoints.
- Report batery status to UPower for HFP AG.
- Fix bitpool increase.
## SPA
- The audioresampler now avoids clicks and pops between activating and
deactivating the adaptive resampler when used by the stream API.
- Use default locale to parse float parameters.
- The upmix functions now have SSE optimizations.
- Avoid recalculating the complete channelmix setup when only the
volume changes.
- The alsa plugin will now only start playback when there is data. This
results in better sync and lower latency between capture and playback.
- The ALSA MIDI sequencer will now pull data from the graph even when it
did not output anything. Fixes some graph stalls with the sequencer in
some cases. (#2775)
- v4l2 and libcamera sources now recycle buffers when nothing is consuming
them. This avoids stalling the graph.
- libcamera now suggests a more appropriate frame size than the smallest
poster frame.
- Improve state changes in audioconvert. (#2764)
- A new seq field was added to spa_param_info to keep track of pending
param updates.
- Support speaker output only on RealTek ALC4080. (#2744)
- The v4l2 source now supports setting controls.
- The libcamera plugin now supports enumerating and setting controls.
- A new unit test for 6.1 channel mapping was added. (#2809) More debug
info was added to audioconvert for the channel matrix.
- Audioconvert will now also upmix a rear-center channel when needed.
## pulse-server
- Add support for the RTP send and recv modules with the new native
RTP module.
- Add option to set latency for pulse-tunnel streams and
module-zeroconf-discover.
- The socket will now be given the same permissions as what pulseaudio
did (0777).
- Implement module-loopback latency_msec correctly with the new delay
parameter.
- sysfs.path is now filled with the same data as pulseaudio.
- The manager now uses the new seq field in the spa_param_info.
- Fix a bug where in some cases the read pointer would get out of sync
and cause too large requests. (#2799)
## ALSA
- The alsa plugin now reuses the stream in prepare which results in
better performance.
- Some deadlocks have been fixed in the ALSA plugin.
- The ALSA plugin reports more accurate timing information in some cases.
## V4l2
- The v4l2 compatibility layer has received a lot of updates.
- Improved node names and format enumeration.
- Support for multiple /dev/videoX devices, each mapped to a unique
PipeWire node.
- Passes the v4l2-compliance test now with both the v4l2 and libcamera
backend in PipeWire.
- Improved mmap support for inline buffer memory. This makes it possible to
consume PipeWire streams.
- Negotiation works more reliably now.
## JACK
- Implement jack_acquire_real_time_scheduling() and
jack_drop_real_time_scheduling() by keeping the thread utils in a global
state.
- Fix jack_client_thread_id() to return NULL when the client is not active,
just like jack1 and jack2.
- An option was added to let the jack_set_buffer_size() function update the
global metadata. A quirk was added so that jack_bufsize uses this new feature
to make the buffer size settings persistent and global, just like jack.
- jack_port_register() and jack_port_unregister() can be called on an
active client so make this thread safe. (#2652)
# PipeWire 0.3.59 (2022-09-30)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix possible wrong samplerate in loopback streams after suspend and
rate switch.
- module-filter-chain can now adapt to the graph samplerate.
- Fix some potential stuttering and crackling in pulse-server.
- Add Bluetooth LE support. This requires experimental kernel and bluez
support.
- The ALSA plugin has more options to control the buffer size. This can
be used to work around high latency in davinci resolve.
- Many bugfixes and improvements.
## PipeWire
- Add audio capture example with volume meter.
- Fix a case where a rate switch would not suspend all the nodes of the
driver first. This could cause wrong samplerates in streams.
- Fix a case where a node would be Paused while still added to the
graph, causing potential crashes. (#2701)
## Modules
- module-filter-chain and module-loopback now use the resample.prefill
option to avoid buffering extra samples and causing unwanted latency
when resampling is activated.
- module-filter-chain can now adapt to the graph samplerate.
- Improve module-raop to support the ALAC codec as raw PCM.
- Improve RTSP parsing to improve compatibility.
## Tools
- Fix 100% CPU in pw-cli monitor mode. (#2709)
- spa-acp-tool can now be exited with ctrl-D.
## SPA
- Various libcamera fixes and improvements.
- Set stride on audioconvert output buffers.
- Make sure we always place the last requested size from the resampler
on the buffers in pw-stream.
- Add resample.prefill option in the resampler to fill the history with
0 so that we don't have smaller buffers at the start.
- Make sure that when an overflow corrupts a POD, that it will always
stay corrupted.
- Rate limit some ALSA warnings and reduce some unwanted warnings.
- Don't recalculate the audioconverter state for each pause/play. (#2701)
- Fix some POD parsing inconsistencies and potential overflows.
- Add support for Asus Xonar SE.
- Fix Flush command handling. It should not stop playback. (#2726)
- Refactor the peaks function and add some unit tests and optimizations.
- The channelmix has an optimized nXm converter and new unit tests.
- Normalization in the channelmixer was fixed.
## pulse-server
- The requested latency of record streams was reduced to fix some
stuttering in Teamspeak. (#2702)
- Tweak the max amount of bytes sent to a client. (#2711) (#2715)
- Improve maxlength calculations, this fixes some crackling noise with
high samplerate and channel counts in some players (audacious).
## Bluetooth
- Merge Bluetooth LE support.
- Make sure we are backward compatible with WirePlumber.
- Fix some HFP and HSP AT command parsing. (#2463)
- Use HFP by default over HSP.
## ALSA
- Increase max number of periods.
- The parameters handling was improved. There is now an option to set the
buffer-bytes of the ALSA plugin.
- PIPEWIRE_ALSA can now be used as an environment variable to restrict the
plugin formats and buffer size.
# PipeWire 0.3.58 (2022-09-15)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix a regression that could cause audio crackling.
- Fix a regression in RTKit because rlimit was not set correctly.
- JAVA sound applications will now alsa work with the pulseaudio-alsa plugin.
- pw-top will now show the negotiated formats of devices and streams.
- Fix some potential crashes when starting streams.
- The ALSA plugin has had improved timing reporting and poll descriptor
handling that should improve compatibility.
- Many more improvements and bugfixes.
## PipeWire
- Avoid scheduling nodes before they are added to the graph. This could
avoid some crashes when scheduling nodes that were not completely
started yet. (#2677)
## Tools
- pw-top now also shows the negotiated formats of streams and devices.
(#2566)
- pw-top prints microseconds as "us" now to avoid unicode problems.
## Modules
- Fix compilation with newer lv2.
- Fix setting realtime priority with RTKit, it was not setting rlimit
correctly and RTKit would refuse to change the priority.
- Fix some playback problems with RAOP sink. (#2673)
- Filter chain will now warn when a non-existing control property is
used in the config file. (#2685)
- Filter chain can now handle control port names with ":" in the name.
(#2685)
- The echo-cancel module and interface now has activate/deactivate
functions to make it possible for plugins to reset their state.
## SPA
- Make sure audioconvert uses the given channelmap and channels for the
volumes, even when not negotiated yet. This makes it possible to change
the volume before the node has been negotiated.
- Refactor the peaks resampler. Fix an error in the SSE code.
- Fix DSD min/max rates, avoid exposing impossible rates.
- Set monitor port buffer size correctly. This could cause some crackling
and hickups. (#2677)
- Make ALSA sequencer port names unique.
## Pulse-server
- Rework the capture buffer attributes to better match pulseaudio. This
fixes a regression where opening pavucontrol could cause crackling.
(#2671)
- Implement TRIGGER and PREBUF methods.
- Handle clients that send more than the requested amount of data.
PipeWire will now also keep this as extra buffered data like PulseAudio.
This fixes JAVA sound applications when they are running on top of the
PulseAudio ALSA plugin. (#2626,#2674)
- Update the requested amount of bytes more like PulseAudio. Fixes
stuttering after resume with the GStreamer pulseaudio sink. (#2680)
## ALSA Plugin
- More debug info was added. The time reporting was improved.
- The poll descriptor handling was improved, avoiding some spurious
wakeups. (#1697)
# PipeWire 0.3.57 (2022-09-02)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Support masking of conf.d/ files. (#2629)
- Use org.freedesktop.portal.Realtime when available. This does the
correct PID/TID mappings to make realtime also work from flatpaks.
- Fix rate adjustement logic in pulse-tunnel. This would cause
increasing delays and hickups when using tunnels. (#2548)
- Add OPUS as a new vendor codec. Add OPUS-A2DP spec. PipeWire can now
send and reveive OPUS data over bluetooth.
- An AAC decoder was added so that PipeWire can now also function as
an A2DP AAC receiver.
- Fix some issues where the wrong samplerate was used. (#2614)
- Fix rate match for sources. This fixes an error where follower sources
would generate many resync warnings.
- Many more bugfixes and improvements.
## PipeWire
- Support masking of conf.d/ files. (#2629)
- Add some more debug info to memfd.
- Improve data-loop invoke method. Also flush pending items. (#2631)
- Add a filter-chain systemd service file than can be used to start
custom filters placed in ~/.conf/pipewire/filter-chain.d/ (#2553)
- Improve triggered timestamps for remote nodes.
- Fix some potential cross compilation problems due to wrong
host_machine.
- Check return values of pw_getrandom().
## Tools
- Updates to pw-cli manpages. (#2552)
- Remove the pw-cli dump command. It is mostly implemented as part of
wpctl status, pw-dump, pw-link, pw-top and others.
- Clean up resource in pw-cat correctly on errors. (#2651)
## Modules
- Fix compilation of AVB on big-endian. Enable AVB only on Linux.
- Use org.freedesktop.portal.Realtime when available. This does the
correct PID/TID mappings to make realtime also work from flatpaks.
- Fix compilation of ROC module when headers are missing. (#2513)
- Improve some error cleanup paths in protocol-native. Improve connect
and disconnect.
- Fix a potential crash in FFT unload in filter-chain.
- Implement PIPEWIRE_NOTIFICATION_FD for notification when the socket
is ready.
- Try to use rtkit if set_nice() fails.
- Fix rate adjustement logic in pulse-tunnel. This would cause
increasing delays and hickups when using tunnels. (#2548)
- Handle disconnect in pulse-tunnel.
## Bluetooth
- Add OPUS as a new vendor codec. Add OPUS-A2DP spec. PipeWire can now
send and reveive OPUS data over bluetooth.
- An AAC decoder was added so that PipeWire can now also function as
an A2DP AAC receiver.
## SPA
- Tweak the resampler window function some more. (#2574)
- Improve format convert performance in some fallback cases.
- Fix rounding in format conversion on ARM NEON.
- Fix libcamera build error. (#2575)
- Fix some issues where the wrong samplerate was used. (#2614)
- Don't wait for more samples that can fit in the ringbuffer in ALSA.
- Improve buffer size handling in audioconvert, scale the buffers based
on the rate conversion and make things work with really large rate
conversions as well.
- Add more and better debug for ALSA devices.
- Improve channel mix: Filter FC and LFE when copying from a different
layout. Implement STEREO from FC. Avoid generating REAR from FC in PSD
mode.
- Fix rate match for sources. This fixes an error where follower sources
would generate many resync warnings.
- Improve ALSA format negotiation. If the ALSA node is not running and
there was a previously configured format, close and reopen the device
to enumerate and accept all possible formats again. (#2625).
## ALSA
- The alsa plugin will now also save the volumes set with the control
API. This saves the volumes set with alsa-mixer, for example.
## Pulse-server
- Flatpak apps with devices=all (Zoom) will now be granted Manager
permissions.
- Small tweaks to the amount of data sent to clients to work around an
issue in freerdp.
## JACK
- Clean up the transport correctly when closing a client. (#2569)
- Match context properties in addition to node properties for the jack
client rules. (#2580)
- Make sure to return an error when disconnected from the server. (#2606)
- Fix thread cast problem in jack_client_thread_id().
- Increase jack_client_name_size() length and make sure we have space for
the \0 byte.
- JACK clients from the same application will be added to the same group
so that they share the quantum and rate.
# PipeWire 0.3.56 (2022-07-19)
This is a quick bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- A critical bug that could crash JACK apps was fixed.
- Some more regressions in audiomixer were fixed. This should fix crackling
and stuttering in some cases as well as some channel mapping regressions.
- A bug in the alsa plugin was fixed that could cause stuttering in VMs.
- Bluetooth sources should have improved latency and rate control.
- Many more bugfixes and improvements.
## Modules
- An experimental AVB module was added. It can expose PipeWire as an AVB
entity and initiate (broken) streaming between entities.
- module-loopback now handles the cases where the input and output channels
are different without crashing or producing silence.
- The filter-chain module now correctly calculates the output size without
crashing in some cases. It also skips invalid ports instead of crashing.
- Handle and report pthread errors better.
## SPA
- The resampler qualities were tweaked a little.
- A bug that would sometimes cut off the last part of a buffer was fixed in
the alsa plugin. This could cause broken audio in VMs. (#2536)
- Access to the alsa mixer and devices is now checked more thoroughly.
(#2534)
- The spa-resample tool can now also handle large downsampling rates without
crashing.
- Audioconverter now uses rounding for float to int conversions, which
reduces distortions. Compilation of the c functions was separated and uses
its own optimization flags now. Unit tests were added. (#2543)
- Noise shaping was improved in audioconvert. A new Wannamaker 3 tap shaper
was added.
- Audioconvert now uses a pattern for generating keep alive noise. This
should have much less energy and be even more inaudible. (#2540)
- A channel mapping bug was fixed in audioconvert. Unit tests were added.
- The dsp audio mixer would sometimes not mix enough and cause dropouts.
(#2525)
## JACK
- A critical bug in the mixer was fixed. It would cause most JACK apps to
segfault at startup.
## Bluetooth
- A new rate control algorithm was implemented for the sources.
- The media role on HSP/HFP streams is now fixed.
## Pulse Server
- Add the resampler delay to delay reporting as well.
# PipeWire 0.3.55 (2022-07-12)
This is a quick bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix some more critical bugs in the new audioconvert and the queueing
in pw-stream that causes stuttering and hickups.
- HFP hardware volumes are now saved and restored.
- Format conversions and mixing was improved.
- Small bug fixes and improvements.
## PipeWire
- The queueing in pw-stream was improved with support for buffer prefetch
in async mode.
- Add a pw-filter unit test.
## tools
- pw-midiplay should now work again after improvements in pw-stream.
## modules
- The RAOP module was improved to support auth_setup.
- The RAOP module should now handle timing packets better.
- Add some more filter-chain examples.
- The filter-chain now has a separate config file with the boilerplate
settings. The examples are now just config snippets that can be dropped
in .conf.d/ directories, such as the filter-chain.conf.d/ one.
- Start suggesting to use target.object instead of node.target in docs
and examples.
## SPA
- Use the cosh window again for the resampler. It should now
give better resampler quality. (#2483)
- Rework the mixer functions. They were rewritten for higher precision and
better performance. Add unit tests and benchmarks.
- Improve format conversion for 32bits for avoid errors in clang because
of undefined behaviour at extreme ranges.
- Fix a bug in audioconvert where it would not consume the right
amount of samples when the resampler was disabled. This could cause
skipping and hickups. (#2519)
- Fix bug in audioconvert where it would try to convert the input samples
multiple times, causing strange artifacts when upmixing.
- Be more strict about valid JSON floats.
- device.vendor.id and device.product.id should now always show up in
0xXXXX format and should not be converted to floats in pw-dump anymore.
- Add triangular dither, add unit tests for noise generation, add some
more optimizations.
## Bluetooth
- HFP and A2DP now expose different routes and thus can have different
volumes.
- HW Volumes for HFP are now synced better. Volume changes from HW buttons
are now also saved.
# PipeWire 0.3.54 (2022-07-07)
This is a quick bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Some critical bugs in the new audioconvert were fixed. The old
adapter had internal buffering that was abused in some places.
- The bluetooth sources were rewritten using a ringbuffer to make them
more reliable to jitter and remove old audioconvert behaviour.
- Many improvements to the audio converter.
- Native DSD128 and up is now supported by pw-dsdplay.
## tools
- Support DSD128 to DSD512 as well by scaling the amount of samples
to read per time slice.
## SPA
- Format conversion is now generated with macros to remove duplication
of code.
- 24bits conversions were rewritten to use the generic conversion
functions.
- Temporary buffers in audioconvert are now made large enough in all
cases.
- Fix draining in audioconvert. This fixes speaker-test.
- Fix the channel remapping. (#2502, #2490)
- Audio conversion constants were tweaked to handle the maximum ranges
and provide lossless conversion between 24bits and floats.
- Vector code and C code are aligned and the unit tests are activated
again. A new lossless conversion test was added.
- Fix an underrun case where the adapter would not ask for more data.
- Fix PROP_INFO for audioconvert. (#2488)
- Use the blackman window again for the resampler, the cosh window has
some bugs that can cause distortion in some cases. (#2483)
- Add more unit tests for audioconvert. Add end-to-end conversion tests.
- Don't leak memory in format converter.
## pulse-server
- Card properties are now also added to sinks and sources, just like
in pulseaudio.
- Increase the maxlength size to at least 4 times the fragsize to avoid
xruns.
- Fix a race when setting default devices.
## Bluetooth
- The source was rewritten to use a ringbuffer. This avoids regressions
caused by audioconvert.
# PipeWire 0.3.53 (2022-06-30)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- The 44.1KHz samplerate was removed again from the defaults, it caused
all kinds of problems with various hardware.
- The ALSA plugin should now be able to deal with unsupported samplerates
and fall back to the nearest supported one.
- The rlimits performance tuning wiki page was updated. Please check
you limits.conf file, the version on the wiki used to give all
processes a -19 nice level instead of just the pipewire daemon.
- The audioconvert plugin was rewritten to be more maintainable and
faster. It also gained support for control ports and dithering with
optional noise shaping.
- An impossible buffering situation is avoided in pulse-server that would
cause some applications (sunshine, ...) to stutter.
## PipeWire
- 44.1KHz was removed from the allowed rates again. It caused all kinds
of regressions due to driver bugs and timing issues on HDMI.
## modules
- filter-chain now does some more error checking and reporting to
avoid some crashes.
- filter-chain now supports more channel layouts for input and output
that does not need to match the plugin layout.
- Format parsing is now more consistent in the modules.
## Tools
- pw-cli can now also work without readline support.
- pw-cat can now also read multichannel ulaw/alaw/u8/s8.
## SPA
- The audioconvert plugin was rewritten. This should make it more
maintainable. It also fixed some issues such as CPU spikes in some
cases and crashes in others. The old plugins were removed, for a
code reduction of some 6000 lines.
- The audioconvert plugin now supports control ports, which can be
enabled on nodes in the session manager. This makes it possible to
control audioconvert properties using timed events or midi.
- NoteOn 0-velocity MIDI events are no longer filtered out. This is
a valid event, nodes that can't deal with it should fix it up
themselves. The JACK layer still filters out these events by default
but this can now be configured with a per-client property.
- The running status on midi events is now disabled to match what
JACK does.
- The ALSA plugin will now deal with driver bugs when a driver announces
support for a samplerate but then refuses to use it later.
- The ALSA plugin has been optimized a little for sample IO.
- V4L2 now doesn't error when there are no controls.
- Error handling was improved in the audio converter.
- The audioconvert plugin now supports rectangular dithering and
noise shaping.
- The audioconvert plugin can now insert additional inaudible noise
that can be used to keep some amplifiers alive. (#705)
- The audioconvert format conversion was changed so that it now produces
the full 32 bits range in the C fallback conversion code as well.
- The resampler window function was changed to a cosh() window
function. (#2483)
- Vendor and device id are now in hex.
## pulse-server
- Tweak the record buffer attributes some more and make sure we don't
end up in impossible buffering situations. Fixes an issue with
distorted sound in sunshine. (#2447)
- Fix a potential crash when updating the client property list.
- Some properties on cards were aligned with pulseaudio.
## Wiki
- Change "priority" to "nice" in the example limits.conf file. It was
giving a -19 nice level to all processes, not just the pipewire
daemon.
# PipeWire 0.3.52 (2022-06-09)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Add 44.1KHz to allowed samplerates. The server can now switch by
default between 48KHz and 44.1KHz.
- Streams now allocate less resources.
- Fix some bugs that could make the server crash.
- Bluetooth now supports the LC3plus vendor codec.
- Many bugfixes and improvements.
## PipeWire
- Add 44.1KHz to allowed samplerates.
- Avoid setting the locale.
- Avoid use-after-free when destroying a node from spa-node-factory.
- Avoid using reallocarray when not available.
- Set port alias is not otherwise set.
## Modules
- Improve filter-chain parsing and error reporting. Handle empty
nodes. (#1950)
- Handle destroy of globals and factory in most modules. (#565)
- Add refcounts to client and resources to handle destroy of the
protocol. (#565)
- Handle global node.name in filter-chain and loopback again, use
it to construct unique stream names.
- Avoid a wrapped pw-node in the adapter. This reduces resources
allocated for streams.
- Fix a crash when module-x11-bell was unloaded. (#2392)
- Add a new module-pipe-tunnel that can write/read data from a
UNIX pipe.
## Tools
- Fix DSD playback again in pw-cat.
- Add -n option to pw-loopback to set node names.
- Add -P option to pw-cat to pass properties to the stream.
- Support stdin/stdout in pw-cat. (#2387)
- pw-dump now also dumps object removal when monitoring. (#2426)
## SPA
- Avoid duplicate param results in pw-dump for ports.
- Avoid endless loops in audioconvert for badly behaving client.
(#2359)
- Scale max-error in alsa based on quantum and avoid logging a warning
when starting.
- Improve debug of failed format conversion. (#2383)
- Handle offset in the audio dsp mixer inputs and clamp to the max
buffer size.
- Add option to disable locale support for JSON number conversion.
- Add support for Astro A20 Gen2.
- Fix some of the test sources, the flags were not set correctly.
- Add camera location as property in libcamera and let the session manager
Generate a localized description.
- Fix some crashes due to wrong vargar types in v4l2 controls. (#2400)
- Improve ALSA resync behaviour. (#2257)
- Add support for Komplete Audio 6 MK2.
- Improve loop cancel while iterating.
- Try not to mix surround channels and AUX channels. Make card with many
ports look better when not using the Pro Audio profile.
- Vulkan filters were added.
## Bluetooth
- Add LC3plus vendor codec.
- Handle unsupported indicators better.
- Ensure multiple devices on an adapter use different codecs because one
endpoint can only be used by one device at a time.
- Fix bitpool control as a follower.
- Handle bluetooth errors better.
- Speed up bluetooth connection by only waiting for the profiles
supported by the adapter.
- The dummy AVRCP player is disabled by default because it seems to break
more devices than it fixes.
## pulse-server
- Add initial stream latency property so that devices can be started
with a resonably accurate latency.
- Fix ringbuffer underrun case. (#2366)
- module-native-protocol-tcp now has a auth-anonymous option to give
full access to the clients.
- Report a node as being moved when it is still moving. This improves
compatibility with pasystray.
- Avoid overallocating message memory.
- Don't export NETWORK nodes in zeroconf. (#2384)
- Fix stride for TrueHD and DTSHD passthrough. (#2284)
- Make sure we don't send too small audio fragments. Fixes capture
from multiple tabs in Chrome. (#2418)
- Rework module handling some more.
- Use the new native module-pipe-tunnel for pipe-sink and pipe-source.
- Implement the STREAM_MOVED message when a stream got moved. (#2407)
- Fix a potential segfault when stopping the server and a TCP module
as still loaded.
## ALSA
- Add support for updating sw_params at runtime, mostly the min-avail
param.
- Capture and playback nodes are now assumed to use a different clock and
will activate the adaptive resampler when linked. This assumption is
removed in Pro Audio mode. This provide a better experience out of the
box with most devices.
## JACK
- Fix setting properties with PIPEWIRE_PROPS again.
- Don't use 64 bits atomic operations for sync_timeout. (#1867)
- Cleanup in error cases was improved, avoiding some crashes. (#2394)
## GStreamer
- Fix pipewiresink in mode=provide. (#1980)
- Share memory into a new buffer in pipewiresrc to avoid buffer corruption.
- Fixes to the source and fd use.
- It is now possible to set client properties as well. (#1573)
# PipeWire 0.3.51 (2022-04-28)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Improved graph reconfiguration.
- Extra configuration options for streams and filters with config
rules and environment variable.
- Improve module-pulse-tunnel latency, stability and error recovery.
- pw-top, pw-cli and pw-link improvements.
- Fix a channelmixer upmixing clipping issue.
- The ROC module has seen many improvements.
- Many more bugfixes and improvements.
## PipeWire
- The graph reconfiguration code was reworked:
* Moved nodes will update the new driver quantum correctly. (#2293)
* Inactive nodes are ignored more.
* Nodes that require a driver are now not scheduled anymore when
they are passive (unused). (#2309)
* Improved performance, the graph is reconfigured with a minimal
amount of changes.
- Method and event argument names were improved.
- A linker garbage collection problem was fixed. (#2292)
- Properties on threads are now implemented. Use common code to
set thread name and add an option to set stack-size.
- Streams and filters always want a driver now. This makes it possible
to just link a playback stream to a capture stream without a driver
and have it work. (#1761).
- Streams and filters can now also have rules in the config file.
- Streams, filters, JACK, ALSA and v4l2 now support PIPEWIRE_PROPS
environment variable to override node properties.
- Add config section extensions. This provides a way for modules to
have specific config to override the default config.
- Handle realloc errors better.
- Improve stream and filter property updates.
## Modules
- The pulse-tunnel modules has improved latency management and should
now work a lot better. (#2230)
- Module-loopback, module-echo-cancel, module-filter-chain unload the
module when a stream is destroyed. (#1754)
- Biquads in filter-chain now can have more gain (5->20 dB).
- Documentation updates. Most Wiki content was moved to the source code
inline comments.
- Filter-chain now has a builtin delay line filter. (#2320)
- Filter-chain can now parse the config key correctly in all cases.
- The ROC sink and source saw many improvements. roc-source is now a stream
by default that connects to the default sink. Both modules will try to set
a graph rate. Both modules have an option to select the FEC mode.
The ROC source has lower latency now. (#2331)
- Handle realloc errors better.
## tools
- pw-cat does not have --list-targets anymore, use one of the more
advanced and less buggy tools such as wpctl or pw-cli to list
sinks and sources.
- pw-top has seen many improvements.
* It now has some timeouts to reset the node values to their default
state when unused.
* The man page was improved.
* Invalid timings and errors are displayed in a better way.
- pw-cli and pw-link can now create links between all ports of given nodes.
- pw-cat can now save to other file formats than wav, based on the extension
of the filename.
## SPA
- The resampler now uses a different internal method for draining. It can
now also handle 0 size buffers as input without draining.
- The channelmixer now uses the front channel averages for FC and LFE.
This avoids clipping and results in much better upmixing.
- ALSA should now work again on 32 bits. (#2271)
- The JSON parser now converts escaped unicode correctly to UTF8.
## bluetooth
- Codec switch improvements when the device is disconnected. (#2334)
## pulse-server
- There is a new module-roc-sink-input module, the the PulseAudio equivalent.
- The ROC source and sink-input module now have a much lower latency.
- The ROC module now has an option to select FEC mode.
- Playback and record rate adjustements should work now. (#1159)
## JACK
- Remove some useless pthread attributes. This makes JACK work in QEMU with
sandboxing enabled. (#2297)
- The buffer_size callback is now only called when something has changed
since the last process() callback or get_buffer_size() method. This
fixes a GStreamer issue and is more in line with what JACK does. (#2324)
- Fix a potential deadlock when the process thread is doing IPC and the
IPC thread is blocking on the data thread.
- Allocation errors in metadata are handled better.
# PipeWire 0.3.50 (2022-04-13)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- pw-stream can now report more timing information and can suggest
the optimal number of samples to queue for playback.
- pw-dot now works again..
- module-pulse-tunnel latency was improved.
- WINE applications using the JACK backend should no longer crash.
- The channelmixer defaults are improved and the muffled sound when
playing back 5.1 and 7.1 material has been fixed.
- Many fixes and improvements.
## PipeWire
- pw-stream now places a suggested amount of samples in the pw-buffer
for playback. This allows you to remove some places where
spa_io_rate_match was needed to get this information.
- pw-stream has new API to request a timing update. New fields are
added in the timing info, such as number of buffered samples in
the resampler and the number of queued and dequeued buffers.
- pw-stream has support for double controls now. More controls are
exposed such as the Rate control to do adaptive resampling.
- The thread-utils object was moved to the context to avoid some
concurrent use cases that caused crashes. (#2252)
- Deactivating an exported node/stream will now remove the node from
the data-thread immediately so that the process function will not
be called anymore and resources can be safely freed. This could
fix some of the last remaining crashes when streams are stopped.
- PipeWire will now fail to load a module that tries to register
the same export type twice instead of silently doing the wrong
thing. (#2281)
## Modules
- Many modules now use the NODE_WANT_DRIVER instead of the
pipewire.dummy NODE_GROUP property. This makes it possible to use
them with any other driver and can avoid resampling in some
cases.
- module-pulse-tunnel now uses an adaptive resampler to keep the
latency under control. Latency should be much better than before
and stay constant even when there are network delays.
- There is now an option for packages to disable building the RTKit
module, which is still built by default for backwards compatibility
reasons.
- A leak was fixed in filter-chain. (#2220)
- Module node names are now made more unique with the pid.
## tools
- pw-cat verbose output has been improved.
- pw-link now has a man page. (#2263)
- pw-reserve now has an -r option to make it issue a RequestRelease
command on the owner of the device. This makes it possible to ask
WirePlumber to close and release a device.
- Fix pw-dot again. It didn't work anymore because of stray done
events that were emitted to notify the client of object serials.
(#2253)
## SPA
- The channelmixer now has PSD upmixing enabled again. We used the
simple upmixing in the previous release but that just sounds too
aweful to be a good default. (#861) and (#2219)
- The channelmixer will not upmix FC and LFE anymore when upmixing is
explicitly disabled. (#2266)
- The channelmixer will only lowpass filter FC and LFE channels when
they were upmixed. (#2280)
- The defaults of the channelmixer were tweaked a little. There is now
a little bit more bass in the LFE channel and more high fequencies
in the FC channel when upmixing. Also the channel widening has been
disabled by default.
- Locale independent float parsing now uses a more portable solution
with uselocale.
- ALSA will now only allocate a buffer size big enough to hold 4
times the quantum limit instead of as large as possible.
## pulse-server
- Internal cleanups in handling of modules.
- A quirk to force s16 sample formats for teams-insider has been added.
## JACK
- The data-loop is now started in activate and stopped in deactivate.
This makes the data-loop respect any custom thread functions you
configure. This also makes WINE apps using the JACK backend work.
(#1495).
- Port sorting was improved/fixed. (#2260)
# PipeWire 0.3.49 (2022-03-29)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Sample rate switching should work again.
- pw-dot can now use the output of pw-dump to render a graph.
- Bluetooth A2DP streaming was improved that would reduce stuttering on
some devices.
- A JACK bug was fixed that would sometimes make it impossible to add more
tracks in Ardour. (#1714)
- Many bugfixes and improvements.
## PipeWire
- Fix a potential crash when NULL params were configured.
- Add some simple functional tests to avoid some recent regressions. Improve
the test framework for this as well.
- Improvements to the poll loop to avoid some use-after-free scenarios.
- Fix samplerate switching again.
- setlocale is not called anymore from the pipewire library. This should be
called by the application. (#2223)
- pw_init() and pw_deinit() can now be nested and called multiple times.
- pw_stream will now report the resampler delay in the pw_time.queued field.
## modules
- module-filter-chain now supports arbitrary many properties and will use
property hints to assign them the right type.
- The ROC modules now accept a sink/source_properties parameter.
- The module-rt can now also be built without RT-Kit support.
- module-echo-cancel can now use a fraction to specify the delay for more
precise control.
## SPA
- The channelmixer will now do upmixing by default and will not use
normalization. It will also use a simple upmixing algorithm that duplicates
channels by default. A more interesting upmix method is also available (PSD)
but needs to be enabled manually. (#861)
- Add SSE optimized (de)interleave functions for 32 bits samples with and
without byteswap.
- JSON parsing of empty strings will now give an invalid number instead of
0.
- JSON numbers are now parsed and serialized in a locale independent way so
that , and . are not mixed up.
- The resampler will now report the resample delay and queued samples as the
extra delay.
## tools
- pw-cat will read more dsf files correctly and will not crash at the end.
- pw-top now has a man page.
- pw-dot can now use the output of pw-dump to render a graph.
## bluetooth
- Improve interactions with oFono.
- Fix recovery with slow connections.
- Improve frame size of AptX-ll.
- A2DP can now use any quantum and will flush packets in smaller chunks
when needed to adapt. This improves stuttering in some cases.
## pulse-server
- The server configuration can now be placed in pulse.properties section,
which also makes it possible to have custom overrides.
- Implement FIX_ flags for capture as well.
- Small fixes and improvements in module loading.
## JACK
- Clear the last error before executing a new action or else we could end up
with error from a previous action. This causes some problems in Ardour where
adding a track would fail after some time. (#1714)
# PipeWire 0.3.48 (2022-03-03)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix IEC958 passthrough again.
- Fix pulse-server crashes when playing a sample.
- Support for more a more advanced upmixing algorithm.
- filter-chain now supports arbitrary many ports.
- Fix multichannel support in WINE. (with new WirePlumber).
- Many bugfixes and improvements.
## PipeWire
- The work queue is now created in the context so we can fail early and
avoid further error checking in various places.
- Fix a potential use after free with threaded loops.
- The protocol now has a message footer. This is used to pass around
global state such as the last registered object serial number. This can
be used to detect when a client tries to bind to old (but reused)
object ids. This avoids some races in the session manager but also
when binding objects.
- The zero-denormals CPU flag is now not touched anymore unless explicitly
selected by the user. Denormals are avoided in filter-chain now in
software. If the zero-denormals are now only configured in the data
thread. This should fix issues with luajit. (#2160)
- Configuration parsing will not actually fail on errors.
- pw-top now correctly clips unicode characters.
- Many places now use a dynamic POD builder to support arbitrary large
property sets.
- pw-stream now support PropInfo parameters so that they can announce
custom properties.
- Serial number are now also set on metadata and session-manager objects.
## SPA
- audioadapter is now smarter when trying to fixate the format. It will
use the PortConfig format to fill in any wildcards. This results in
the least amount of conversions when the stream can handle it. It also
is part of a fix (also requires a session manager fix) for WINE
multichannel support. (#876).
- Fix 5.1 to 2 channels mixing. It was using the volume of the stereo
pair on all channels.
- Fix some weird volume issues when a source is capturing and
channelmixing.
- Add stereo to 7.1 upmixing.
- The channelmix parameters can be changed at runtime now.
- Many improvements to the upmixing algorithms. Rear channels are now
constructed from the ambient sound and can have delay and phase shift
applied to them to improve spacialization. The stereo channels can
be filtered so that the dialog is more concentrated in the center
channel. (#861)
## modules
- Module X11 bell received cleanups and improvements.
- The module now has a private method to schedule unload later. This
simplifies cleanup in many modules.
- module-filter-chain now handles arbitrary many ports and control
ports. (#2179)
- Fix a bug in RAOP where it was reading from the wrong port. (#2183)
## pulse-server
- Nodes with the DONT_MOVE property should fail with -EINVAL when
they are moved.
- Fix a segfault when playing a sample. (#2151)
- The _FIX flags in pulse-server also now ignore the configured
sample format, just like pulseaudio does. (#876)
- Fix IEC958 passthrough again. It got accidentally broken since
0.3.45 with a fix for another issue. (#1442)
- Fix module-null-sink device.description. (#2166)
## Bluetooth
- Don't try to connect HSP/HFP when no backend is available.
# PipeWire 0.3.47 (2022-02-18)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
This is a quick emergency release to fix some severe
problems with the previous release.
## Highlights
- Fixes a bug in pulse-server that caused cached notifications
to play multiple times. (#2142)
- Removed check and warnings to catch leaked listeners on the
proxy. This might access invalid memory and cause infinite
loops in older wireplumber.
# PipeWire 0.3.46 (2022-02-17)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Fix a critical bug in pipewire-pulse buffer size handling that made some
apps (MuseScore, ... ) stutter.
- Fix a critical bug where devices would not show when the kernel was
compiled without VERBOSE_PROCSFS.
- JACK clients will now use lock-quantum by default. This makes sure that
all dynamic quantum changes are disabled while a JACK app is running.
The only way to force a quantum chance is through a JACK app or with
the metadata.
- Almost all limits on number of ports, clients and nodes are removed.
- A Dummy fallback sink is now automatically created when there are no
other sinks. This avoids stalling browsers.
- Sound sharing with Zoom should work better. A new WirePlumber release
might be required.
- Many more fixes and improvements.
## PipeWire
- Update docs with new config overrides.
- The rule matching logic was moved to config and code is now shared with
pulse-server and JACK.
- Add new Romanian translation.
- When a quantum is forced with metadata, any node that asked to lock-quantum
is ignored so that the quantum change can happen.
- Fix a bug where a mixer was removed twice, leading to potential memory
corruption.
- The port limits on nodes and filters are now removed. Some code was
simplified.
- Fix a potential leak because listeners where removed while they could be
emitted.
- Improve context.exec and avoid zombie processes.
## Modules
- The RAOP module now has a default latency of 2 seconds, like PulseAudio.
- The echo-cancel module now uses the plugin loader to load the backends.
This makes it possible to add custom, out of tree, echo cancel plugins.
## Tools
- Improve help of pw-link.
- Output to stdout and error to stderr. Use setlinebuf for stdout to improve
piping between apps. (#2110)
## SPA
- Improve removing sources when dispatching. Also improve performance now
that a destroy loop can be removed. (#2114)
- Fix an fd leak in the logger when logging to a file.
- Improve loop enter/leave checks and support recursive loops.
## pulse-server
- Clamp various buffer attributes to the max length. Fixes some issues
with various applications. (#2100)
- Module properties are now remapped correctly from their pulseaudio variant
to the PipeWire ones.
- Fix module index in introspect. Use the right index when loaded from our
internal modules. (#2101)
- Improve argument parsing and node.description. (#2086)
- The sink-index should now be filled in correctly when playing a sample.
(#2129)
- module-always-sink is now implemented and loaded by default. (#1838)
- Add support for loading some modules only once.
- Module load and unload now does extra sync to make it appear synchronous,
like in PulseAudio. This improves sounds sharing in Zoom.
## ALSA
- Fix critial bug where alsa devices would not show when the kernel was
compiled without VERBOSE_PROCFS.
- Some corner cases were fixed in the ALSA timing code. When the capture node
is follower, it will now not try to read too much data and xrun but it will
instead produce a cycle of silence.
- Various fixes and improvements to make ALSA devices resync to the driver
more quickly and accurately.
## JACK
- Add an option to name the defauld device as `system` to improve
compatibility with some applications,
- Use lock-quantum by default. This makes sure that all dynamic quantum
changes are disabled while a JACK app is running. The only way to force
a quantum chance is through a JACK app or with the metadata.
- It is now possible to do IPC calls from the data thread. Note that this
is a very bad idea but required for compatibility with JACK2.
## GStreamer
- GStreamer sink will now set a default channelmap to make it possible to
remap to the channel layout of the device.
# PipeWire 0.3.45 (2022-02-03)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Zoom, telegram and other apps should be able to play sound again.
- Implement a better way to force and lock JACK buffersize.
- Default sink and source names and properties are improved.
- The config loader can now load and merge fragments in conf.d directories
for easier user configuration of config files.
- Many small bug fixes and improvements.
## PipeWire
- pw-cli can now also send Commands to nodes. This can be used to Suspend
a device, for example.
- The eventfd was removed from loops and invoke is now used to stop the loop,
this saves an fd.
- New Alpine CI target to test musl builds, various build fixes.
- Add force-quantum and force-rate properties.
- The config loader can now load and merge fragments in conf.d directories.
(#207)
- resource error methods can be called without a resource and then just
log an error message.
- link-factory can now also work from the config. (#2095)
## modules
- module-simple-protocol has better argument parsing and can handle
channelmap now. (#2068) It's also possible to configure latency and
rate.
- The native protocol now does extra checks for invalid data. (#2070)
## ALSA
- TI2902 chips as found in various Behringer cards should have inputs
again.
- Better handling of busy devices in udev, retry when the inotify close
event is emited.
## SPA
- plugins now handle alignment properly and only expect the max alignment
required for the CPU. (#2074)
## Bluetooth
- SBC-XQ is now enabled for the JBL Endurance RUN BT headset.
- Support for non-hexadecimal XAPL version strings to improve compatibility.
- Use HCI commands again to probe the adapter msbc capability. This improves
compatibility with some adapters. (#2030)
- Set the right startup volume.
- Better A2DP source idle handling.
- Fix a timer bug in SCO sink that could cause busy looping.
## pulse-server
- A playback issue when the tlength > maxlength was fixed. (#2069) This
affected Zoom and other applications.
- The STREAM_BUFFER_ATTR command is now implemented.
- Module names are improved. (#2076)
- Many small fixes and improvements.
- Fix a pavucontrol crash with invalid channels. (#1442)
## JACK
- Use the new force-quantum and force-rate properties in the JACK API to
switch quantum and ensure it can't change for the lifetime of the JACK
app. (#2079)
# PipeWire 0.3.44 (2022-01-27)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- It is now possible to run a minimal PipeWire server without a session
manager, enough to run JACK clients.
- The maximum buffer size is now configurable and can be larger than
the previously hardcoded limit of 8192 samples. When using high sample
rates, the larger buffer size can avoid xruns.
- The default maximum latency was reduced from 170ms to 42ms. This should
improve overall latency for application that ask for a large latency,
such as notifications.
- Better JACK compatibility. Patchbays should now get less confused about
ports appearing and disappearing.
- Fix some bluetooth crashes.
- Fix some races in ALSA device detection.
- Many bug fixes and improvements all over the place.
## PipeWire
- Bump the meson requirement to 0.59.0.
- pw-top now reports correct times for filter-chain and loopback.
- max-quantum is now also scaled with the rate. A new quantum-limit
property was added as a hard limit for the quantum. This makes it
possible to configure for larger than 8192 buffer sizes. Note
than many JACK applications have a hardcoded 8192 limit. (#1931)
- The max-quantum was reduced to 2048, This gives a 42ms default
latency. (#1908)
- pw-filter can now return a NULL buffer from _get_dsp_buffer().
- Add a PIPEWIRE_RATE and PIPEWIRE_QUANTUM env variable to set the
graph rate and the graph quantum and rate respectively.
- Fix a potential file descriptor leak in the connection.
- A new minimal.conf file was added to demonstrate a static setup
of a daemon that doesn't require a session manager and is able to
run JACK applicaions.
- Nice levels are now only changed on the servers, not the clients.
- Add an option to suspend nodes when idle.
- Make it possible to avoid quantum and rate changes with
pw-metadata. This is essential in a locked down system.
- Handle mixer port errors better and fail to create the link instead
of silently not working.
- Nodes that are moved to a driver now have all the linked nodes moved
as well. This makes it possible to run some graphs without a
driver, such as paplay -> zita-j2n.
- pw-cli and pw-dump can now also list objects by name, serial and
object.path using glob style pattern matching.
## modules
- filter-chain can now also configure parameters by index.
- Fix the client name of module-protocol-simple. (#2017)
- module-rtkit was merged into module-rt. This makes it easier to
ship a default config that works on more systems by default.
- module-adapter can now configure the adapter node from the config.
Previously, this was a task only performed by the session manager.
- module-metadata can now also create metadata object from the
config file.
- The ROC module should now work again. (#2045)
- An X11-bell module was added to handle X11 bell events. (#1668)
- filter-chain and loopback modules now have better unique default
names for the streams, which makes it possible to save and restore
their volumes independently. (#1983)
- module-echo-cancel now has properties to control the delay and
buffer size.
## ALSA
- The monitor names are now correctly parsed.
- The default period size for batch devices is limited now to avoid
large latency.
- The unused min/max-latency properties were removed.
- Internal latency is now also configurable with params at runtime.
- The udev rule for TI2902 was removed because it causes problems.
- Fix a race where some devices would sometimes be missing. (#2046)
- Add some more timeouts to work around a race in udev device
permission changes when switching VTs.
## SPA
- Fix potential infinite loop in audioconvert.
- The spa-resample tools can now also use optimized implementations.
- Fix a potential crash in resampler. (#1994)
- audioconvert can now also handle F64 formats. (#1990)
- The channelmixer now does normalization by default to avoid clipping
when downmixing is active.
- The channelmixer will now generate LFE channels when the lfe_cutoff
frequency is set, even when upmix is disabled.
- The channelmixer will now always generate FC when the target has it.
- Adapter now reports latency correctly, even after linking the monitor
ports.
- Reduce memory usage and preallocated memory in some of the
audioconvert nodes.
- Many properties are now exposed in adapter, such as the resample
quality.
- The resampler and channelmixer can now be disabled.
## V4L2
- pw-v4l2 now also works for ffplay. (#2029)
- Take product names from udev now that the kernel returns a generic
name.
## JACK
- The jack pkgconfig file now has the `jack_implementation=pipewire`
variable to be able to distinguish jack implementations. (#1666)
- jconvolver now starts correctly again. (#1989)
- The object.serial is now used for the port_id. This makes it easier
to track old objects in the cache.
- Add a dummy jacknet implementation. (#2043)
- A bug in the port allocation was fixed that would make it impossible
to allocate ports at some point. (#1714)
## Bluetooth
- Bluetooth profiles are now saved properly by the session manager.
- Improved profile detections, increased timeouts for slow devices.
- Implement HFP call indicator for improved compatibility.
- Handle the case where bluez does not set the adapter or address
properties on the device instead of crashing.
- Improved support for setting the profile from the session manager.
## pulse-server
- Monitor sources now have the device.class=monitor for better
compatibility.
- Behaviour after seeking is improved. The algorithm for requesting
bytes from the client was simplified and improved. (#1981)
- module-ladspa-sink implements the control argument now. (#1987)
- A potential memory leak in the message queue was fixed. (#1840)
- Use the object.serial for the pulseaudio object index. The index is
not supposed to be reused and this would cause problems with some
clients.
- Servers should now again be able to listen in IPv4. (#2047)
- module-x11-bell was added. (#1668)
- There is now support for per-application quirks and properties in
the pipewire-pulse.conf file. Per-application latency and buffering
properties can also be configured.
- Fix a regression in telegram sounds not playing.
# PipeWire 0.3.43 (2022-01-05)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Flatpak apps such as Ardour can now remove links again.
- Many fixes to pulse-server. Memory usage should be improved. Some
crashes are fixed. Underrun handling should work better. Better
compatibility with GStreamer based applications after seeking.
- Many of the samplerate and quantum changes bugs in previous releases
were fixed. This fixes some issues where the microphone would fail
to work.
- Many more small fixes and improvements all over the place.
## PipeWire
- Quantum and rate changes are now applied immediately when the driver
is idle. This avoids setting the driver in the previous samplerate.
(#1913)
- Object destruction now does not need write permissions anymore. This
restriction needs some more work. (#1920)
- When we reposition, start a sync operation. This fixes a problem
in Ardour when seeking. (#1907)
- Require meson 0.56.0
- Make the align property in BUFFER_PARAM optional. We now only set this
if the plugin has specific requirements and we default to the CPU
largest alignment requirement.
- pw-record will now also list monitors and streams as possible targets.
## modules
- Improve LV2 plugin support in filter-chain. Add support for Worker and
Options.
- The loopback module now has a unique media.name to make it possible
for the session manager to restore unique volume settings.
## SPA
- Improve sample rate for EAC3 streams, some clients scale it while
others don't so use some heuristics to make things work better.
(#1902)
- Allocate ports dynamically in audioconvert. This avoids using larger
memory blocks of preallocated memory that confuses the allocator.
(#1840)
## ALSA
- Merge the latest pulseaudio UCM improvements. (#1849)
- Fixes for selecting the sample rate. (#1892)
- Improve latency on USB devices by scaling the period size based on
the desired quantum when the device is opened.
- Add api.alsa.period-num to configure the amount of periods to use
in the device. Some devices have lower latency when a small value
is forced. (#1473)
- Allow multi-rate by default. In previous versions cards could only
be opened in one samplerate to avoid bugs in pre 5.16 kernels. This
however caused other problems so the default was removed.
- Fix a bug where a card was not freed correctly.
- Fix a bug in the alsa boundary check that could hang the alsa-plugin
for a long time.
- The ALSA plugin now has a parameter to configure the allowed
samplerates.
## JACK
- Improve handling of monitor nodes.
## Bluetooth
- Codecs now have a priority. This should improve codec selection.
## pulse-server
- The stream FIX_ flags are now implemented. (#1912)
- Improve flushing and draining behaviour. Short samples will now
play correctly. (#1549)
- Fix a crash when enumerating the formats. (#1928)
- Track quantum changes and update the amount of required buffering
accordingly. This improves forced quantum handling. (#1930)
- Improve handling of channels > 32.
- Handle the case where a module is destroyed before it could be
completely loaded.
- Fixes some issues when samples were removed while they were playing.
(#1953)
- Fix some issues in module-zeroconf-publish.
- Fix some memory leaks in module-roc.
- Add command access control. This avoids execution of commands without
proper authentication.
# PipeWire 0.3.42 (2021-12-16)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
This is a quick emergency release to fix some severe
problems with the previous release.
## Highlights
- Fixes a bug in pulse-server underrun handling that broke qemu
and orca.
- A fix was added to pulse-server to handle quantum changes
gracefully.
- Fix module-echo-cancel again.
- Fix a bug where the bluetooth headset capture was producing
noise.
# PipeWire 0.3.41 (2021-12-13)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Improved compatibility for flatpaks. Flatpaks with newer PipeWire
version can connect to an older server in all cases.
- A new RAOP module was added to stream to Apple Airplay devices.
- OBS can now capture from the monitor devices again when using
WirePlumber.
- Improved JACK compatibility. Improved stability in Carla and Ardour
when changing buffer size. Improved latency calculations and
playback latency in Ardour.
- Improved pulse-server handling of underruns and buffer size changes.
- Many bugfixes and improvements.
## PipeWire
- The systemd service files now have better names.
- client.access permission checks are improved.
- Fix some memory leaks in error paths.
- Objects now have a global serial number that is unique for the
lifetime of the server.
- Make clock.rate, clock.allowed-rates and clock.quantum
runtime tunable parameters with the settings metadata.
- Add some additional memory checks in client-node to avoid
sending invalid memory to clients. (#1859)
- Improve buffer memory allocation. If one of the nodes is a
remote node, ensure we only use memory that can be shared.
- Version checks when binding to objects is removed. This means
that newer clients can now bind to older servers, which is
a typical case for a flatpak.
- A bug in the latency calculations was fixed where it would in
some cases report the wrong minumum latency.
## modules
- module-echo-cancel has voice-detection enabled now.
- module-raop-sink and module-raop-discover to stream audio to
an Apple Airplay device.
- module-filter-chain now has preliminary support for LV2
plugins.
## SPA
- The audio resampler now has improved buffer size calculations.
In some cases it was too small and would cause distortions.
- More checks are done when doing volume changes so that the
channelmap is correct.
- Audioadapter now exposes most config options with params so that
they can be adjusted at runtime.
- The resampler can now calculate the expected input buffer size
before receiving the first buffer, which avoids some confusion
when starting streams.
- Support was added for some 10bit video formats.
- MONO channel handling was improved.
- Most plugins now set a clock name and this is configurable where
it makes sense. The clock.system.monotonic clock name is used
for most plugins that use the system clock for timing.
## pulse-server
- implement module-raop-discover
- Use STREAM_CAPTURE_SINK property when capturing from a monitor
source to better inform the session manager. This fixes some
issues where OBS would capture from the microphone instead of
the output monitor.
- Limit the amount of cache messages to 16MB and don't add large
memory blocks to the cache. This should fix some excessive
memory usage that people reported.
- Fix a potential memory leak when cleaning up a client.
- Do some additional checks to avoid buffer overruns.
- Improve recovery from underruns better. (#1857) This improves
seeking in gnome-music.
- Improve recovery when the quantum is forced larger that the
stream configured latency.
- The prebuf state is now handled correctly.
## JACK
- A per type object cache is now implemented. This ensures that
port objects remain valid for a longer time because many
JACK applications inspect objects after they are destroyed.
This improves catia/carla compatibility.
- Recompute the latencies when the buffer-size changes. Fix some
cases where we would end up with negative latencies.
- Handle regcomp errors to avoid some crashes later.
- Latency calculations are improved a lot.
- More care is taken to not call a process callback while a buffer
size change is pending. This fixes some crashes in Carla, which
expect that all clients are paused when one handles the buffersize
callback.
- Loopback links to a client are now handled correctly and without
latency. This fixes playback latency in ardour6 (#1839)
## ALSA
- ALSA devices now keep track of the samplerate of the card and
ensure that all PCM use the same rate. This is a workaround for
a kernel bug that is fixed in 5.16.
- Refactor the ALSA plugin a little.
- The ALSA plugin now reports correct delay for a capture PCM. (#1697)
- The ALSA nodes now expose all config options with params that can be
changed at runtime.
- The ALSA node has a configurable clock name. Adaptive resampling to
match clock rates is avoided when the driver has the same clock
name as the ALSA node. This can be used to link alsa devices together
with a word clock.
# PipeWire 0.3.40 (2021-11-11)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- Producers and consumers can now incrementally negotiate a format
by narrowing down the options. This can be used to select an optimal
combination of format and modifiers.
- Driver nodes such as the consumer of a headless compositor can now
throttle the speed based on a new trigger_done event.
- Headless compositors can now signal a damage event to consumers
to start the processing of the graph.
- Compatibility improvements in JACK.
- Draining and resuming is now working correctly in pulse and alsa.
- Many bugfixes and improvements.
## PipeWire
- Many BSD fixes.
- clang compilation fixes.
- Fix map implementation on big-endian machines.
- Improve tracking of param changes in pw-stream.
- Add support for renegotiation. With this change, producer and
consumer can incrementally renegotiate a format until it is fixed.
This will be used to do complex negotiation of DRM modifiers.
(#1732).
- Add a trigger-done event in the stream. This can be used to know
when processing of the complete graph has finished after issuing
a trigger_process() and it can be used to throttle processing.
- Add a RequestProcess node event and command. This can be used by
non-driver nodes to suggest to a driver to start processing. One
case is where a compositor can emit this event as a result of a
screen update to let the headless compositor start an update.
- Fix zeroconf sample format.
- pw-mon outputs to stderr now and has colors.
## SPA
- Fix compilation on ppc and armv7.
- Fix port type check for ALSA seq midi ports so that they are not
falsely listed as hardware.
- Fix crash when running SSE code on unsupported HW. (#1775)
- The libcamera plugin was rewritten. It now supports hotplug,
format enumeration and an easier to read codebase.
- Fix compatibility some more for cards with 64 channels.
## pulse-server
- Flush data in pause in combine-sink to avoid stray audio fragments.
- Fix a race where not all objects were removed correctly.
- The latency calculations and setup was improved to more closely
match pulseaudio behaviour. PULSE_LATENCY_MSEC should now resemble
pulseaudio more closely. (#1769)
- The drained reply is now sent only once and new data will be
accepted once the drain completes.
- Fix a potential crasher bug where the stream started processing
before the setup was completed.
- The server will now drop the client connections when the pipewire
connection is lost.
## JACK
- Rework the jack_port_get_buffer() method to return the same memory
when called multiple times during the process() callback. This makes
things work on a new Hydrogen. (#1748)
- Add an option to disable showing the monitor ports.
- JACK ports are now sorted per node/client and port_id. This should
more closely match JACK behaviour and avoid random port order.
(#1780)
## v4l2
- Fix v4l2 LD_PRELOAD script.
- Make sure we destroy the proxy when the global is destroyed.
## ALSA
- _prepare should exit the draining state. (#1467)
- Fix the precision of the _delay function by taking into account
the amount of queued samples are the correct samplerate.
# PipeWire 0.3.39 (2021-10-21)
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
## Highlights
- media-session is now moved into a separate module to speed up its
deprecation in favour of WirePlumber.
- There is now an LD_PRELOAD v4l2 emulation library to run some existing
v4l2 applications on top of PipeWire.
- Filter-chains should now flush out remaining samples when paused. There
is now also the option to let a filter-chain drain so that long filters
such as reverbs can fade out properly.
- Stability and compatibility improvements in JACK apps.
- Better Bluetooth compatibility with more devices.
- libcamera plugin improvements.
- Many bugfixes and improvements all over the map.
## PipeWire
- Fix compilation on ARM.
- Log topics are added to most modules.
- Documentation updates. Many improvements to the layout. Reorganisation
of the modules and groups.
- Share a work queue for all links and nodes. This removes the need for
a separate eventfd per link and per node.
- Catch errors in the map implementation.
- Add option to compile without dbus support.
- Fix biquad frequency. It was using the wrong sample rate.
- Fix a potential crash when destroying nodes, in some cases the node
would not be deactivated properly.
- Add some more helpers for dealing with properties and their values.
- Implement flush and reset on virtual sinks/sources.
- Make it possible to let virtual sinks/filter-chains run and drain
after being idle.
- Fix a bug where the quantum could exceed the maximum because it was
scaled with the sample rate.
- Fix channel_map parsing in module-zeroconf-discover so that the remote
channel map is used.
- pw-stream errors emitted on the proxy are reported but not fatal
any more. They are usually used by the session manager to signal status
to the client but otherwise does not really cause an error on the
client.
- Links now also store the output and input node id in the global
properties so that applications can parse and use them regardless of
how the link was made. (#1723)
- pw-stream and pw-filter now have an event to notify commands.
- The echo-cancel module can now operate on larger quantums.
- pw-cat now uses the right metadata to find the default devices in
--list-targets.
## media-session
- Don't try to remix unpositioned streams when linking. This ensures
that linking to Pro-Audio nodes does not remix the stream channels
but links them as they are, one by one.
- media-session is now moved to a separate module to accelerate its
deprecation in favour of WirePlumber.
## SPA
- Many libcamera improvements, handle MemFd buffers, handle errors
gracefully.
- Small improvements to make interface fall-backs easier to implement.
- Add support to enable flush-to-zero and denormals-are-zero to avoid
high CPU usage when dealing with denormals.
- AUX13 channels are no longer reported as AUX12. (#1727)
- Devices with more than 32 channels in Pro-Audio mode now only
uses AUX channels.
- Improve windowing function of the resampler to reduce aliasing and
improve the quality.
## JACK
- Port connect callbacks will not only be emitted after the port
has negotiated buffers, which improves compatibility with
applications that try to use the port right after the callback
(jack_midi_latency_test).
- Fix crash when midi ports were removed and being monitored, like
in Ardour.
## pulse-server
- The pulse tunnel will now use the specified format/rate/channels.
- Improve lookup of default source and fall back to the monitors when
no sources are available.
- Mark some nodes as network nodes so that we can set the NETWORK flag
correctly.
## GStreamer
- The GStreamer element not releases the buffers in the stream again in
all cases so that they can be reused by other streams.
## v4l2
- Add a v4l2 LD_PRELOAD library to emulate v4l2 system calls on top of
PipeWire. This is tested with firefox and GStreamer and is known to
not work with Chrome.
## Bluetooth
- AAC compatibility improvements.
- Disable hardware volume for "Tribit MAXSound Plus" and
"SoundCore mini".
- Add quirk to disable faststream. Disable faststream on "FiiO BTR3".
- Add a dummy AVRCP player to improve compatibility with some devices.
# PipeWire 0.3.38 (2021-09-30)
This is a quick bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Topic based logging was added to improve debugging.
- An off-by-one error was fixed in the audio resampler that could
cause distortion when downsampling.
- Various bluetooth compatibility improvements.
- More fixes and improvements.
## PipeWire
- module-pulse-tunnel now has better default latency to make it work
better in more cases. There is also an option to configure the
desired latency.
- pw-cli now has readline support.
- Topic based logging was added. Log lines can now be filtered by
topic using wildcards. This should improve debugging.
- The systemd service files should now have better descriptions.
- Fix a crash in module-zeroconf-discover when unloading.
- Fix a crash in filter-chain when using unaligned memory.
## ALSA
- Sync the udev rules and profiles with pulseaudio.
- Fix a memory leak.
## SPA plugins
- An off-by-one error was fixed in the resampler that could cause
distortion when downsampling. (#1646)
## Bluetooth
- Avoid probing the native backend because it might block for DBus
activation. This fixes some long startup times.
- Fix the kernel version check, 5.14.x kernels should also support
mSBC.
- Fix FastStream microphone support in more cases.
- Add workaround for Intel AX200.
- SCO sink should now also work in follower mode.
## PulseAudio server
- Make the service file require a session manager.
# PipeWire 0.3.37 (2021-09-23)
This is a quick bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Capture and playback is now avoided even more on unavailable
devices. This should fix some issues where an unusable microphone
was selected by default. It should now also again be possible
to select an unavailable device as the default.
- Native DSD audio playback is now supported. pw-cat can now also
play DSF files with the -d option.
- JACK stability improvements with buffer-size and samplerate
changes in some apps.
- Many cleanups and bugfixes all over the place.
## PipeWire
- pw-metadata -d does not cause an infinite loop anymore. (#1622)
- Increase some plugin buffer sizes to fix some issues with many
channels. (#1620)
- Protect the global plugin list with a lock. Make sure pw_init()
is locked. Fixes some issues with concurrent ALSA plugin usage.
## media-session
- Unavailable devices can be set as the default again. (#1624)
- Do a better check if a device has available routes and avoid
selecting devices with unavailable routes as default.
- Media-session was moved to its own directory. It used to live
in examples but it is past the example stage and it interferes
with the build options for the real examples.
## Bluetooth
- The hardware quirk database is now loaded by the plugin instead of
the session manager. This makes it also work with wireplumber.
## ALSA
- The ALSA mixer now handles device removal much better. (#1627)
## libcamera
- Many fixes and improvement to the libcamera plugin. (#1513)
## pulse-server
- Improve compatibility with pulseaudio module arguments.
- Parse channel_map arguments in module-loopback. (#1486)
## JACK
- Delay emitting the samplerate and buffersize callbacks until the
client is active. This fixes some crashes with Carla and other
JACK apps.
# PipeWire 0.3.36 (2021-09-16)
This is a quick bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- A quick update with mostly only bugfixes and small improvements.
- Capture and playback is now avoided on unavailable devices. This
should fix some issues where an unusable microphone was selected
by default.
- MIDI output should not stop randomly now.
- The GStreamer elements are much improved, cheese should work
a lot better now.
- Virtual sinks and sources should now always show up immediately.
- JACK processing is now delayed until buffersize and samplerate
are emitted. This should improve stability of many JACK apps.
- JACK transport sync is now implemented correctly so that preroll
in bitwig works.
## PipeWire
- The module dir environment variable can now contain multiple paths.
- Documentation now contains dot graphs of dependencies. (#1585)
- config min/max/default quantum values are now scaled with the
samplerate.
- A potential crash was fixed where destroyed memory was still used
by a node. This could cause crashes in cheese.
## pipewire-media-session
- Only allow passthrough for passthrough formats (S/PDIF) for
now. (#1587)
- Improve bluetooth profile autoswitch.
- Don't try to route audio to nodes with unavailable routes.
## ALSA
- Pass the right AES bits to the alsa device when opening an
S/PDIF stream.
- Fix a bug in the MIDI bridge port management logic. When a port
was added and immediately removed, output would stop.
## GStreamer
- The GStreamer source now handles the flushing state correctly.
- All blocking operations now have a 30 seconds timeout, to avoid
infinite locks.
## Plugins
- V4l2 Device formats and controls are now passed on the node, just
like with audio devices.
- audioconvert now also exposes the softMute property.
## JACK
- Improve stability when changing buffer size and sample rate
dynamically by pausing the processing until the application has
handled the callback.
- Improve handling of timebase master. When the master was moved to
another driver, it did not attempt to become a new timebase
master on the new driver. (#1589)
- Implement transport sync to make preroll in bitwig work. (#1589)
## pulse-server
- Fix an issue where virtual sinks/sources would not show up
immediately. (#1588)
# PipeWire 0.3.35 (2021-09-09)
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- S/PDIF passthrough over optical or HDMI is now implemented.
- Some critical fixes to MIDI, draining of streams and various
modules.
- skypeforlinux should work better now after adding it to the
quirks database.
- Bluetooth codecs are now in separate plugins to make it easier
to ship them.
## PipeWire
- Drain was fixed in pw-stream. In some cases it would not clear
the drain state correctly. Fixes the issue where speaker-test would
only play one channel.
- Loopback connections to a driver will now activate the driver. This
fixes an issue where MIDI connections between devices or some
applications (puredata) would not get any MIDI messages. (#1559)
- The audiomixer can now mix more formats. Together with the passthrough
improvements this can be used to avoid conversions to/from the DSP
format in some cases.
- Make sure we idle drivers when removing a node from it in all cases.
JACK clients could keep a driver node busy.
- Add new methods to accumulate object info. The old one was difficult
to use when applications need to accumulate multiple changes.
- A new interface to load modules has been added. Plugins can use this
to ask the host (PipeWire) to load spa plugins.
- Increase param buffer size to handle larger params. Nodes with a large
number of channels would sometimes not have properties. (#1574)
- Concurrent link negotiation that caused some links to not work,
is now avoided. This fixes monitor ports in Ardour6.
- Small tweaks to how the quantum and rate are handled when nodes move
between drivers. Make node.lock-quantum work with node.latency
## PipeWire modules
- The convolver plugin in filter-chain has been optimized some more.
- The echo-cancel stream properties were improved so that it actually
can remember the streams it links to. (#1557)
- module-pulse-tunnel had the buffer attributes wrong and would cause
high latency with older pulseaudio servers. (#1434)
- module-roc had the properties configured wrongly, which would cause
it to not work at all in most cases. (#1538)
- There is now an example of a 7.1 virtual surround sink using the
hesuvi impulse responses.
- The convolver now supports dirac pulses as the IR.
## ALSA
- UCM config is now cached per device, using up less memory. It also
temporarily works around a problem in alsa-lib that is now being
patched and rolled out. Should stop devices from disappearing when
logging out and back in. (#1553)
- Fix the MIDI clock rate matching. It was too sensitive to small
changes and would spiral out of control and break MIDI rather
quickly.
## pipewire-media-session
- The media session can now save and restore IEC958 (S/PDIF) codecs
for the sinks.
- Passthrough of IEC958 (S/PDIF) content is now possible. If the client
and the sink contain a compatible set of codecs, an exclusive
connection can be made between client and sink to pass the encoded
S/PDIF content directly to the device.
- Use new introspection info update methods to suspend nodes in all
cases. Sometimes, nodes would fail to suspend because the state info
was not evaluated.
- The media session can now work in non-DSP mode, which will try to
avoid any audio conversions between client and device when possible.
But, this will also disable compatibility with JACK applications.
## Bluetooth
- Bluetooth codecs are now compiled into separate plugins which are
dynamically loaded. This makes it possible to change the plugin
implementation or ship plugins separately without having to recompile
the bluetooth module.
## PulseAudio server
- Delay stream create reply until the stream is linked to a sink/source.
- The device-restore extension is now implemented. This makes it possible
to configure the IEC958 (S/PDIF) codecs supported by the sink with
pavucontrol.
- skypeforlinux now uses the same quirks as teams to make the sinks
show up in all cases. This fixes the issue of not being able to hear
the remote end in skypeforlinux.
## JACK
- Improve catia and carla compatibility by caching objects a little longer
after being removed. (#1531)
- JACK ports now notify the negotiated format correctly.
- A potential deadlock was fixed when multiple threads would perform a
call that would require a roundtrip.
- Improve bufsize callback, it should not be called right after doing
activate() but only when the buffersize changes later.
- Add tweak to disable the process lock. Some older apps might not
expect it. (#1576)
## Docs
- man pages are now generated with rst2man.
- DMA-BUF docs were updated.
- Documentation updates.
# PipeWire 0.3.34 (2021-08-26)
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Fixes some critical issues with previous release. Such as
devices not showing up and default devices being lost.
- Support for consumer driver streams to make the producer v-sync
to the consumer monitor in a headless compositor setup.
- Improvements to routing of streams.
- Bluetooth battery status support for head-set profile and
using Apple extensions. aptX-LL and FastStream codec support
was added.
- Internal latency of ALSA devices can now be configured.
- A fast convolver was added to the filter-chain to implement
virtual surround sinks or reverbs.
## PipeWire
- Add support for streams that are driver nodes for the graph.
This was already possible for source streams but it is now
also possible for playback streams. This can be used to let
a producer v-sync to the consumer monitor in a headless
compositor setup. (#1484)
- State files are now stored in XDG_STATE_HOME instead of
XDG_CONFIG_HOME. They will still be loaded from the config home
if they are not in the new state home, to ease migration.
- Set a driver on inactive nodes to make transport work in xjadeo.
(#1491)
- Fix parsing of filter-chain controls.
- A new FFT based convolver was added to module-filter-chain. It
uses a 0-latency 2 stage convolver with small FFT for the head
and a large FFT for the tail of the convolution. A convolution
can be used to implement IR based reverbs, HRIR surround sound
or other convolution based operations. An example HRIR
virtual surround sound sink has been added as well.
- module-filter-chain was reworked a bit to support more config
options for the plugins.
- Endian conversion and alaw/ulaw formats are now supported for
streams.
- pw-cat will now suggest a samplerate for the graph.
- SPA_PLUGIN_DIR can now search in multiple paths separated with
a ':'.
- Passthrough mode has been worked on and has been partially
merged. S/PDIF definitions have been added and ALSA devices
updated to report and configure S/PDIF formats. The session
manager changes to fully configure and enable passthrough mode
will hopefully be merged next time.
- Fix a race in pw-stream where it would not always emit the
right events.
## ALSA
- Fix volume changed check. It was checking against the wrong
value and this could cause rounding errors.
- The ALSA plugin now also uses RT scheduling.
- Fix the behringer UMC202 usb device id, it was using a generic
TI chip ID that caused problems.
- Fix USB devices that don't show up anymore. Use an ALSA
workaround to fix this. (#1478)
- Add a rule for the new firmware of Sennheiser GSX 1200.
- ALSA sink and source can now use ProcessLatency param to configure
the internal latency. The latencyOffsetNsec property is also
exposed so that the latency can be adjusted in pavucontrol as
well.
## media-session
- Fix a critical issue where the default device was not remembered
anymore when it was removed.
- Fix the issue where some apps need to be restarted when nodes go
away and reappear.
- Improve routing of streams. Streams that have a specific target
set will now be moved to the target when it appears instead of
staying on the fallback.
- Small memory leak fixes.
- Try to switch back to the user selected profile after finishing a
Bluetooth recording.
## Bluetooth
- Add support for HF indicator 2 battery status.
- Add support for XAPL battery status.
- Set the Communication intended role for HFP profile.
- Enable SBC-XQ by default if not disabled by quirks.
- Fix some potential crashes due to excessive polling.
- Add aptx-LL codec and enable duplex for aptx-LL devices.
- Add FastStream codec. This is a codec that can use a
duplex SBC channel.
## PulseAudio server
- Suggests a samplerate for the graph.
- Support for handling S/PDIF (IEC958) formats was added. This will
start working when the session manager supports configuring streams
and nodes in passthrough mode.
- Be smarter when handling devices without a negotiated format
yet so that they are visible as well. This makes virtual
devices show up immediately.
## ALSA plugin
- Now suggests a samplerate for the graph.
## JACK
- The jack.pc file can only be generated with meson >= 0.59.0. When
the jack-devel option is enabled, it will generate an error with
older meson.
- Small stability improvements when connecting/disconnecting in
Ardour.
# PipeWire 0.3.33 (2021-08-05)
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Better support for virtual sinks/sources for Pro Audio
profile.
- Better DMA-BUF format modifier negotiation.
- Support multiple sample rates in the graph. Not enabled
by default yet.
- Bluetooth can now automatically switch between headset
and audio profile.
- Documentation updates.
- Many improvements and crasher fixes.
## PipeWire
- Make AUX channels an official channel map, use this for the
PRO audio profile so that we can name the channels. This
make it possible to define virtual sources and sinks for
Pro Audio devices in a more reliable way.
- Fix scheduling of some virtual sinks/sources. (#1407)
- Fix potential corruption of ringbuffer because of multiple
concurrent writers. This might be the cause for many reported
crashes. (#1451)
- Don't place sockets in $HOME. (#1443)
- Improve DMA-BUF negotiation. Add a flag to avoid fixation
of a property so that producers can negotiate more
efficiently. This is used to negotiate DMA-BUF modifiers,
which should make more efficient use of the GPU. (#1084)
- Add support for multiple sample rates. The graph can switch
when IDLE to one of the supported rates. Add an option to
lock the rate as well. This is not enabled by default yet
because of driver bugs that need to be worked around first.
- Add node.lock-quantum property that can be used to lock the
quantum in place.
- Improve latency reporting in the loopback module.
- Make new client-node method to send the peer port id to the
mixer. This can be used to know where the buffers entering the
mixer are coming from. (#1471)
## Tools
- pw-top should now also correctly show bluetooth devices. (#1540)
## media-session
- Handle unset of the default node.
- Added a module that can switch the bluetooth profile to headset
profile when a stream wants to record from it.
## JACK
- Only call the jack callbacks when the client is active. Some
JACK applications don't expect callbacks before the client is
active and crash (x42-dpl). (#1461)
- Emit client unregister event.
- Add per-client match rules in the config file to set app
specific configuration and tweaks. (#1456)
- Use peer_id to implement jack_port_get_buffer() from one of
our peer ports to get the data before it enters the mixer.
Makes the capture monitors work in Ardour6.8. (#1471)
## Bluetooth
- Add some broken kernel versions to the mSBC blocklist
- Avoid looping and consuming CPU when we can't write to the
BT socket.
- Use libfreeaptx instead of libopenaptx.
- Fix rounding errors in HW volume conversion.
## PulseAudio server
- implement module-switch-on-connect to emulate pulseaudio
behaviour of new devices. Some desktop environments expect
this behaviour and break otherwise.
- Fix stream cleanup, make sure the stream is stopped before
destroying it. Might be cause for some of the reported
crashes.
- Update message API to use the JSON format.
## Other
- Many documentation updates.
- Many cleanups and small improvements.
- Support the latest libcamera version. (#1435)
# PipeWire 0.3.32 (2021-07-20)
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Real-time priority handling for threads was reworked. Freewheeling
will now drop RT priorities to avoid being killed.
- Problems with filter chains and echo-cancel being linked in a loop
was fixed.
- alsamixer should now be able to see the mixer controls again.
- JACK has seen some latency reporting improvements that make Ardour
report latencies correctly.
- Many bugfixes and improvements.
## PipeWire
- Fix a bug in the neon audio resampler code.
- There is now a node.link-group property to relate linked streams.
this can be used to track the dataflow with coupled streams.
- Fix a crash when recalculating latency on a destroyed port. (#1371)
- Filter chains and other modules that create streams can now also
be added to the daemon config itself. (#1309)
- Fix some potential deadlocks in timerfd. (#1377)
- Feedback links are skipped when recalculating latency to avoid
loops.
- The dummy driver and null-sink now stop the timerfd when following
another driver instead of generating useless graph wakeups.
- rt.limit was increased to 2 seconds. Some applications got killed
because they run lengthy code in the Real-Time thread. (#1344)
- Fix s24_32 to float, it was not sign extending properly. (#1393)
- The performance of the feedback loop check algorithm was improved
a lot, making complex graphs start much much faster.
- The zeroconf publish module now doesn't republish nodes every time
the volume changes. (#1406)
- A potential memory corruption error has been fixed in the loop
that could cause random crashes.
- Mempools can now be created from multiple threads at the same
time.
## media-session
- Loops in coupled streams are now avoided. (#1394)
- Port changes for inactive profiles are ignored now by the
default-route module. (#1403)
## ALSA
- Make sure that alibpref is not part of the device node name because
it is random. (#1362)
- Fixed an off-by-one that could cause midi events to end up with a
wrong timestamp and thus being discarded by some apps. (#1395)
- Fix some memory leaks when destroying a card object.
## JACK
- Fix some invalid cycle wakeups that could cause JACK application to
run with a 0 buffer size. (#1386)
- JACK can now use rtkit to manage realtime priorities on threads.
- The Real-time priority is dropped when entering freewheel mode to
make sure we don't get killed when using too much CPU.
- jack_recompute_total_latencies() is now implemented, fixing the
latency reporting in Ardour. (#1388)
- Fix some overflows in time calculations.
- Ensure frame_rate in position is never 0.
- Graph callbacks are now emitted as well.
## Bluetooth
- RTP payload type is now set correctly for aptX, LDAC and SBC, which
should improve compatibility with devices that care about this.
## PulseAudio server
- There is now a quirks database to deal with bad clients. The database
is builtin but can be made external later.
- Teams is now lied to and told all sink/sources use s16 samples to make
it show all sinks/sources.
- Firefox is forced to remove the DONT_MOVE flag on capture streams so
that you can move firefox streams with other tools.
- The UNDERFLOW warnings are now made into info log messages to not
spam the log too much. Many application just let things underrun
and PulseAudio did not warn about this either. (#910)
## ALSA plugin
- The alsa plugin now uses the right metadata for finding the default
source and sink, which makes the volume controls reappear. (#1384)
## Other
- Cleanups in pulse-server and pipewire.
- Documentation additions.
# PipeWire 0.3.31 (2021-06-28)
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Fixes for alsa-lib 1.2.5
- New pulseaudio modules: module-avahi-zeroconf,
module-pipe-source, module-roc-sink, module-roc-source.
- JACK has seen massive stability improvements. Locking
and correctness wrt to callbacks has been reworked. Also
thread priorities have improved.
- Handle various crashes and lockups when running out of file
descriptors.
- Bluetooth now uses a hardware database to disable
non-working features on listed devices.
- Scheduling quantum and rate can now be changed dynamically
with pw-metadata.
- Many bugfixes and improvements.
## PipeWire
- Improve cleanup of context in error cases.
- There is now a pw-test framework for improved unit tests.
- Improve property serialization to valid JSON.
- Fix some macros to work with better with coverity.
- Metadata permissions are checked now. Clients need the
M permission on an object to be able to set metadata for
it.
- The core metadata object will now remove metadata for
removed objects, the implementor does not need to worry
about that anymore.
- Audioadapter will now follow the rate of the graph with
the resampler adjusting itself dynamically.
- Core now has a metadata implementation helper. A context
will expose a metadata with settings that can be changed
at runtime. This can be used to change the loglevel or
graph quantum and samplerate on the fly.
- An infinite loop was fixed in the audio converter.
- Handle out-of-fds more gracefully. Handle truncated
control data by dropping the client connection.
- Fix profiler crash with many streams.
- Improve latency handling in pw-filter. There is now a
default handler and a ProcessLatency parameter to simplify
latency reporting.
- Latency reporting was improved in devices and streams.
- And example sink/source was added.
## ALSA
- hardware mute and volume are now properties on the
Route param to make things easier.
- More fixes for alsa-ucm 1.2.5.
## Tools
- spa-json-dump now properly encodes string and keys.
- pw-dump now shows the correct subject of the metadata.
## PulseAudio server
- Ensure the node.description is set, some applications
crash otherwise (TeamSpeak).
- Module loading and unloading was improved.
- module-avahi-zeroconf was implemented.
- module-pipe-source was implemented
- module-roc-sink and module-roc-source was implemented.
- The maximum amount of connections has been limited to 64,
like pulseaudio.
- Handle out-of-fds more gracefully.
- Fix overflow of read/write pointers.
- Source and sink state are now decoupled from the monitor
state and will report IDLE when not playing anything.
## media-session
- Port switching should now happen to/from the port that
actually changed.
## JACK
- The locking was reviewed. All callbacks are now emitted
from the PipeWire thread with the lock released and
the process function will be disabled for the duration
of the callback. This ensures that no two callbacks are
called at the same time.
- Improve internal consistency and try to never call callbacks
with invalid objects.
- Monitor port can now be accessed with system:monitor_%d
- client threads are now created with SCHED_FIFO and module-rt
is used to create the other RT threads. This should avoid
SIGKILL from RTKit in some cases.
## Bluetooth
- Various bugfixes to improve connections to devices.
- Handle delayed UUID connection.
- There is now a hardware database that can disable features
in listed devices.
- Use libusb to detect availability of mSBC.
## ALSA
- The virtual device name can now also contain a media role.
# PipeWire 0.3.30
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
This is a quick emergency release to fix some severe
problems with the previous release.
## Highlights
- Recording from a monitor port should work again.
- JACK applications should now be more stable again.
- Freewheeling should not lock up anymore.
- Fix lockups in many pulseaudio apps.
- module-echo-cancel was implemented in pipewire-pulse
- Many other stability fixes.
## PipeWire
- Improve module path logic.
- Improve logger formatting
## PulseAudio server
- Make sure to pass 64 bits values for time on ARM 32 bits to
avoid protocol errors.
- Avoid a crash when unloading module-combine-sink.
- Avoid overflow in requested bytes, resulting in stalled
audio.
- Implement module-echo-cancel.
## Bluetooth
- Handle latency parameters instead of failing.
## JACK
- Fix locking in many places to avoid deadlocks and crashes.
- Fix port rename.
- Stop freewheeling correctly instead of deadlocking.
# PipeWire 0.3.29
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Latency reporting is now implemented.
- Many documentation updates and cleanups.
- module-combine-sink was added to PulseAudio server.
- Better handling of multichannel input profiles.
- Fix 100% volume issue when monitor suspends or profile
changes in some cases.
- Bugfixes and crashes
## PipeWire
- A new module-rt was added to acquire real-time scheduling
privileges without using RTKit.
- Documentation fixes and updates. Docs are now using a
custom theme.
- There is now a MANDATORY flag on properties that influence
how properties are filtered.
- Filter-chain now parses the LADSPA_PATH correctly when it
contains a colon separated list.
- Move `#pipewire` IRC channel to oftc.net.
- Fix an error where param changes were not emitted in all
cases.
- Implement Latency reporting. Latency values are propagated
through the graph so that each node knows the latency to
the output/input device. Synchronization in pw-stream has
been updated to use this.
- Some more upmix cases are added so that LFE, SIDE and REAR
can be generated from a mono channel as well.
- pw-stream and pw-filter will now emit the process event from
the real-time thread in a safe way, potentially avoiding some
of the harder to debug crashes.
- Fix potential stack overflow with serialize_dict.
- Add PIPEWIRE_NO_CONFIG to run without custom config files.
- The WebRTC echo canceler was added. Next versions will
integrate this better.
## PulseAudio server
- module-combine-sink was implemented.
- Fix some segfaults when DBus connections fail.
- Support for listening on IPv6 was added.
- Fix a bug where many flushes could result in requests for too
much data from the client, causing sync, latency and garbled
sound problems after many seeks.
## ALSA
- Also probe input paths for multichannel mappings. This makes
multichannel input ports show up in more cases.
- Fix headphones/front volume issue on some cards.
- Fix max volume issue when profile changes.
- Fix issue with UCM local config that was not available when the
device was opened in the server but the UCM was opened by the
session manager. Fixes alsa 1.2.5 compatibility.
## JACK
- Implement latency reporting with the new Latency params.
# PipeWire 0.3.28
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
## Highlights
- Freewheeling was implemented. This makes it possible to
export projects in ardour.
- A new powerful filter-chain module was added that can
be used to created all kinds of filter-chains from ladspa
and builtin plugins.
- Many more pulseaudio modules are now implemented:
module-ladspa-sink, module-ladspa-source, module-pipe-sink,
module-tunnel-sink, module-tunnel-source,
module-zeroconf-discover
- Fix a bug where devices would not appear after logout/login.
- Fix a bug where the volume was reset to 0 and devices would
have no audio.
- Config files are now installed in the data dir, system
overrides in /etc/pipewire and $HOME are checked first.
## PipeWire
- Implement freewheeling for JACK clients
- Add filter-chain module that can be used to construct
arbitrary graphs from ladspa and builtin plugins.
- Add new property to easily set algorithm params
- Add module-pulse-tunnel to tunnel audio to and from
a PulseAudio compatible server.
- Add a avahi zeroconf discover module, create pulse-tunnel
when PulseAudio devices are announced.
- Config files are now installed in the data dir, system
overrides in /etc/pipewire and $HOME are checked first.
- Applications now have their monitor ports named with the
"monitor" prefix to avoid confusion with the output ports.
- LICENSE clarifications.
## GStreamer
- fixes to the pipewiresink plugin.
## SPA plugins
- Fix a bug where the volume was reset to 0
- Add events to dbus plugin. This can be used to detect dbus
disconnects.
## Media-session
- Handle dbus disconnect.
- Handle device reservation errors.
## PulseAudio server
- Implement module-ladspa-sink and a new PipeWire-only
module-ladspa-source
- Implement module-pipe-sink
- Implement module-tunnel-sink and module-tunnel-source
- Fix a bug with module argument parsing
- Implement module-zeroconf-discover
## ALSA plugin
- improve error handling
PipeWire 0.3.27
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Fix bug that caused bluetooth devices to stop working.
- Fix session-manager crash when switching users caused by
the DBus plugin cleanup errors.
- Improve volume handling of monitor ports.
- Fix GStreamer v4l2 support.
- Implement module-remap-sink and module-remap-source in
pipewire-pulse.
- More fixes and improvements.
- PipeWire
- Move the loopback code into a module. Use this in pw-loopback
and pipewire-pulse. Fix some cleanup crashes.
- A dummy echo-cancel module was added. Later versions will
include the webrtc echo-canceler.
- State files don't have the X permission anymore.
- Move i18n core into a private header file.
- Stream can now advertise properties and receive property
updates.
- Fix an issue where the wrong index was used to address a port.
It caused Bluetooth devices to stop working.
- SPA plugins
- Only do LFE filtering on channels we created.
- Improve name and description of devices.
- Improve cleanup in DBus connections and sources to avoid crash
when destroying.
- Improved volume handling. Hardware, Software and Monitor
volumes are now properly separated and handled.
- Support for S8 and S8P formats was added.
- Tools
- pw-cli can now also create Struct from JSON arrays.
- Session-manager
- The session manager can now also create passive links. This
makes is possible to suspend effect chains together with the
sinks when not in use.
- Match rules now check the complete property value instead of
only the start.
- Handle multiple pending param enumerations, take only last
result. This fixes some volume update issues.
- GStreamer plugins
- GStreamer plugins now advertise handling DMABUF explicitly. This
is currently the only way to avoid a memcpy for v4l2 devices.
- Device support
- sync ACP with pulseaudio, merge upstream patch instead of our
hack to workaround missing duplex devices.
- V4l2 devices don't expose their fd anymore. Previously the fd
and mmap offsets were passed to the client to access the buffer
memory but that could create security issues.
- Bluetooth
- Don't unregister the profiles on shutdown because this can cause
delay, just close the dbus connection.
- Bluetooth devices now try to use the global samplerate from the
graph.
- PulseAudio server
- Implement remap-sink and remap-source modules using the
new loopback module.
PipeWire 0.3.26
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- I18n support, with translations merged from PulseAudio.
- New pw-link tool.
- Many Bluetooth improvements, support for hardware volumes.
- Support for 64 channel devices.
- Stability fixes and improvements.
- PipeWire improvements
- The link factory can now also make links between nodes and
ports by name so that it can be used in scripts.
- Add module-protocol-simple that can stream raw audio on a
socket.
- Added i18n support. Merge PulseAudio translations for the ACP
library so that we don't cause regressions.
- Support more than 19 channels in the channel mixer.
This makes all channels usable on 32 and 64 channel cards.
- Detect if we're running in a VM and allow for tweaking some
settings such as the max-quantum to make things work better in
VMs.
- Fix a potential crash when connecting a client and updating
permissions.
- Fix a potential crash when trying to link incompatible ports.
- Lingering links in error will now be destroyed automatically.
- Tools
- Added new pw-link tool to list and monitor ports and to
list, monitor, create and destroy links between them.
- pw-cli can now also list params by name.
- pw-dump now outputs Spa:String:JSON types in metadata as properly
parsed and formatted JSON so that tools can parse the
metadata values using a JSON parser.
- Session-manager
- Add logind support. The bluetooth monitor can only be started
for one user at the time, so use logind detect active seats.
- ALSA icon names were improved to match what PulseAudio does.
- Improve the bluetooth icon name. Also use the device alias
as the device description, like PulseAudio.
- Device support
- When devices become inaccessible, they are now removed from
the PipeWire graph.
- Fix datatype selection for buffers in v4l2 and libcamera.
- Bluetooth
- Various memory leaks and crashes are fixed.
- Added support for AVRCP hardware volume.
- Added support for HSP/HFP hardware volume.
- PulseAudio server
- Fix module-loopback connections to monitor ports.
- Implement module-native-protocol-tcp.
- Handle nodes and streams with > 32 channels. The PulseAudio
API only supports up to 32 channels so only make those 32
first channels available with the PA API.
- Implement module-simple-protocol-tcp.
- Improve events emitted by the server.
- Improvements to channels and channel_map properties on
modules. one can imply the other and they should match when
both given.
- null-sink will now have their volume work correctly by
default.
- JACK
- JACK development files can now optionally be installed.
PipeWire 0.3.25
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Many stability improvements.
- Plug fd leak in flatpak detection
- add pw-loopback tool and support module-loopback
- volume restore for virtual sinks/sources or other sink/sources
without hardware volume.
- Fix cracks and pops in audio capture.
- Many bluetooth improvements and compatibility fixes.
- PipeWire improvements
- Hex encode invalid SEC_LABEL properties to avoid generating
invalid json.
- Small fixes to how nodes are started to avoid crashes.
- Make sure ports are only scheduled after being fully
negotiated to avoid crashes.
- Implement coverity into CI, fix some bugs detected by
coverity.
- Plug leak in flatpak detection.
- Fix crash when removing globals in some cases.
- Fix crash because the mixer info was not removed from a
port in all cases.
- Add PIPEWIRE_AUTOCONNECT environment variable to disable
stream autoconnect. Also add a config option to disable
autoconnect.
- Improve wildcard in format helpers.
- Add env variable to disable journald logging.
- Tools
- Add a new pw-loopback tool to loop a capture device to a
playback device.
- Display localized strings correctly in pw-top
- Add some more options to pw-dot
- Session-manager
- When a new node is configured and some stream have this
as the default target, move them to it.
- Fix some crashes.
- Implement volume restore on nodes without routes. This makes
it possible to restore volume on purely software nodes like
null-sinks.
- Also try to suspend errored nodes so that they may leave the
error state and be reused again.
- Break endless link loops when something went wrong.
- Device support
- Fix monitor volumes, they are now separate from the hardware
volume.
- Fix cracks and pops in alsa capture caused by mismatch between
resampler and capture source.
- Add start-delay config option to alsa sink.
- Ensure the PipeWire midi ports start from a higher number so
that the lower port numbers are available to apps as before.
- Bluetooth
- source devices are now removed when idle
- Support using pipewire as Audio Gateway.
- LDAC encoding quality can be configured now
- Implement codec switching for HFP
- Implement codec switching with new device property.
- Improved stability and compatibility
- Autoconnect device profiles at startup
- Add AAC bitrate mode configuration
- Make it possible to use an A2DP source as an input device. You
can then use your phone as an A2DP microphone, for example.
- Remove battery reporting when RFCOMM connections is closed.
- PulseAudio server
- Add some workarounds for Blueman
- Set correct errno values, fixes a hang in load-module of a
non-existing module
- Try to not send inconsistent information to clients.
- Fix some crashes.
- Add support for the new send-message API, use this to
switch bluetooth codecs.
- Fix draining by making sure we are started.
- Handle 0 sink and source as the default sink/source.
- Implement module-loopback
- JACK
- Fix some memory leaks when closing a client
- Add self-connect config option to limit where clients
can connect themselves.
- Don't crash when apps call _port_get_buffer() on a
port that is not their own but simply return NULL.
This fixes a crash in Ardour6.
- Improve client added/removed callbacks. Sometimes it would
emit a client remove when there were still ports for the
client.
- make sure midi port names are stable across reboots.
PipeWire 0.3.24
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Many JACK midi improvements and device support.
- Fixes in gnome-control-center default sink/source handling.
- Many small performance improvements in alsa device handling
and latency. There should also be less cracks/pops and xruns
now.
- Fixes for gnome-control-center default sink/source handling.
- More bluetooth compatibility improvements.
- PipeWire improvements
- Implement simple upmixing.
- Disable the resampler when not used. This improves latency
and CPU usage.
- Handle max-quantum on devices and try to not make the quantum
larger than the device buffer size.
- Improvements to how nodes and links are activated. It should
now result in less xruns and cracks/pops.
- meson uses the feature options everywhere now.
- Handle volume remap in the channelmixer. This fixes the channels
on multichannel devices.
- Try to escape invalid JSON string characters.
- Keep better track of changed parameters in audioconvert.
- Improve config files, make arrays where needed.
- Respect NO_COLOR where possible
- Support in-place config file parsing to avoid allocations and
improve startup performance.
- There is now a config option to enable non-power-of-two quantums.
- Preliminary support for upmixing and generating LFE channels.
- Session-manager
- Default nodes are not stored as JSON in the metadata. This
is more readable and introspectable.
- More default-nodes and default-routes improvements. Port
switching should work better now.
- Wait until all devices are scanned before linking clients.
- Fixes some crashes.
- Sinks (monitors) can now be set as default sources.
- Device support
- Fix startup timers for alsa devices.
- Improve timers in alsa when quantum changes. It should cause
less xruns and cracks.
- Fix UCM setup of capture devices.
- Only disable IRQ in alsa when not batch. For batch devices the
hw pointers are updated each IRQ so we need to keep them enabled.
This massively improves latency on USB batch devices to the same
level as JACK (with small enough period size).
- Bluetooth
- Improvements to profile switches.
- Improvements to volume handling.
- Fixes for A2DP sources
- Add support for battery status when available.
- Many other small improvements.
- PulseAudio server
- Handle NULL in set_default_sink/source to clear the default.
- Implement a workaround for gnome-control-center when setting
the default sink/source. It also sets the target in
stream-restore to the new default. This fixes moving streams
in gnome-control-center.
- Fix some races by replying to some requests after the operation
completed.
- Prefer formats of the extended format API.
- Create a pid file on startup to improve compatibility with apps
that look for it.
- Capture streams can now be moved to monitors with pavucontrol.
- Fixes for crashes.
- JACK
- jack clients can now connect to the 'default' server.
- Move midi ports back to the midi client.
- Only mark midi hardware ports as terminal/physical.
- Use the same midi names as a2jmidid.
- match system ports in get_ports.
- Improve compatibility with some apps that require a
fixed latency.
- Beginnings of the libjackserver implementation.
PipeWire 0.3.23
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Fixes for some critical bugs in last release.
- Fix bug where audio was not drained properly at the end of
playback, causing repeating sound.
- Profile and route switching was improved and should mimic
more what pulseaudio did.
- Various fixes for xruns in capture and playback.
- Bluetooth now supports delay adjustment and various other
improvements.
- The pulseaudio server now correctly identifies AC3 and DTS
streams and returns a not supported error instead of playing
static.
- Multichannel support was improved in the alsa plugin and
the channel mixer. Channels should now play on the right
speakers in all cases.
- PipeWire improvements
- Small fixes and improvements in JSON parsing and encoding.
- Improvements to param handling in audioconverter. It would
previously not always notify of changes.
- Avoid updating some properties that we use internally such
as the object id and the node.id.
- log.level in the config files is now actually used.
- the PIPEWIRE_LATENCY env variable should always override
any application settings in filter/stream/jack.
- The config file can now contain filer and stream properties
to, for example, control the resampler, mixer and latency.
- Add sandboxing to the systemd services
- Various FreeBSD fixes.
- Improve draining and a way to exit the drain state as well.
- Many multichannel fixes. Channel remapping should now be
correct.
- Fix bug with repeating audio at the end of playback because
the drain in the resampler was not draining all channels.
- RTKit default rt.prio has been increased to 88. This will
likely still be clamped to 20 until distros increase the
max priority.
- Session-manager
- Don't try to switch to Pro Audio profile, this should be
a user choice only.
- Don't crash when metadata was disabled such as when not
using the audio features of pipewire.
- Rework the profile and route handling.
- Add systemd unit files for the media-session
- Device names should now also have sane names so that tab
pactl completion works on them.
- Device support
- Fix ALSA format enumeration in more cases. Use the channels
and rate as a filter.
- Make sure the graph doesn't ever use buffers larger than
the alsa device buffer size or we get xruns.
- Tuning of the alsa device timeout handling and dynamic
resampler. There should now not be any xruns when streams
appear and disappear or when the quantum changes.
- Fix bug in alsa device when reassigning to a new driver,
in some cases the dynamic resampler was not activated and
things would drift out of sync and fail.
- Fixes in quantum changes for ALSA capture and how the
resampler is drained and fed with the new samples.
- Bluetooth
- Delay adjustment has been implemented now. Bluetooth
devices should now be more synchronized with video due
to proper delay reporting. Because BT delays can be
large, it can cause hickups in some players.
- Fix volume in bluetooth devices.
- Codec switch improvements.
- PulseAudio server
- Latency offset adjustment is now implemented and functional
for bluetooth devices. It is not working for alsa devices
yet.
- Handle unsupported formats. Previously we would accept encoded
formats and play noise. This fixes AC3 playback in vlc.
- Move some of the configurable parameters to the config file.
- Fix a fatal use after free when playing samples
- Improve module handling. loaded modules now show up in the
list of modules and can be unloaded. This also prepares the
core for more module implementations later.
- ALSA plugin
- Fix drain with very large buffers, we need to manually start
the stream before draining.
- Fix the channel layout handling.
- Improve compatibility with apps that expect the poll to only
return when there is activity.
- Fix drain for capture
- JACK
- Add a config option to shorten and filter client names
- Increase the length of the client name size and make sure
we don't exceed the allocated size.
- We now include our own jack header files so we can build
without depending on another jack-devel package. We don't
yet install the headers or provide pkgconfig files.
PipeWire 0.3.22
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Per client config files replace the module-profiles. It's
now possible to tweak settings and load custom modules.
- Pro Audio card profile support. You can now select the
Pro Audio profile and have raw device access with the
maximum number of channels and no mixer controls. This is
the usual setup for managing high end Pro Audio cards.
- Many fixes and improvements in the JACK library to make
devices look and integrate better.
- Many bluetooth improvements. Playback should be more
reliable and better synchronized. Support for the HFP HF
profile.
- Small fixes and improvements all over the map.
- PipeWire improvements
- Add support for restrictions requested by a client. This
makes it possible to implement Flatpak policy for emulated
PulseAudio clients as well.
- Fix removal of params in objects. Previously they would not
be removed from the cache.
- Remove mlock warnings by default. There is an option to enable
them again if you want to check if your system is optimized.
- Remove LimitMEMLOCK lines from the service files. They can
only lower the system settings and are thus not useful.
- Implement per-client config files. Each pipewire client will
now read a config file that you can use to configure the
context of the client.
- Implement state and config load/save in pipewire. This is used
by the session manager or other apps.
- Make an option to disable dbus support.
- Add tool to convert pipewire config to JSON.
- Session-manager
- Give all permissions to Manager flatpak apps. In the future
we will use the Permission store to remember user settings.
- Improvements to default audio/sink handling.
- Add option to configure device suspend time.
- Small fixes in route handling.
- Device support
- Complain when ACP profile files are not found and use
a fallback in order to get something working.
- Add volume support to monitor ports.
- Fix resume from suspend for ALSA in more cases.
- ALSA ACP cards now have a Pro Audio profile that exposes
the raw card devices.
- Bluetooth
- Enable A2DP delay reporting. This improves audio/video sync
when playing audio over bluetooth.
- Fix stuttering in A2DP source
- Tweak buffer size and latency settings to avoid stuttering
- More work on HSP and HFP support
- Fix initial profile configuration
- Add HFP HF support
- PulseAudio server
- Small tweaks in capture packet size to avoid crashes in some
apps.
- Detect Flatpak apps and requests the flatpak permissions from
the session manager. This means that Flatpak pulseaudio apps
will now run with reduced permissions.
- ALSA plugin
- Reduce min buffer size in the plugin for lower possible
latency.
- JACK
- implement some missing methods to make qjackctl work again.
- Use the context data thread instead of making our own. This
fixes the issue where the data thread was not given RT
priority correctly.
- Pass extra jack flags around in port properties. This makes
CV ports in carla work.
- Many tweaks to the port names and aliases. Unwanted characters
are filtered out, giving better names to jack apps. Default
device names are now equal to those seen in pulseaudio apps.
- Add an option to make a separate client for the monitor ports
of a device. This makes it more usable in apps.
- add support for system:playback_N and system:capture_N port
names for apps that hardcode these port names.
PipeWire 0.3.21
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Many PulseAudio compatibility fixes. Handling of corked
streams, the prebuf setting, seek modes and stream flags
are now implemented correctly.
- Ports and Profiles are now managed by the session manager
and can save and restore previous settings.
- ALSA device handling has been tweaked for maximum
compatibility at the expense of latency. There are tuning
options in the config file.
- Improved Bluetooth support. HSP is disabled by default
because it is old and deprecated and in some cases causes
conflicts with the newer HFP profile. Codec switching is
now implemented as well.
- PipeWire accepts donations with liberapay now.
- PipeWire improvements
- Improve draining in pw-stream.
- pw-stream now uses busy metadata by default. This makes sure
that no writer can write to buffers when readers are still
busy.
- Fix handling of empty array/choice instead of failing.
- Fix crashes when creating properties from empty strings.
- Make it possible to pass an array to module-access
access.allowed variables
- Fix small bug in argument parsing in pw-cat
- Session-manager
- Restore route volumes in all cases, also when switching
routes.
- Use a default route volume for unknown routes instead of
letting the system decide on a default.
- Improve profile handling. Don't try to restore unavailable
profiles. Implement the profile switching in the session
manager now.
- Fix handling of Virtual sources as defaults.
- Handle port switching in the session manager. Implement
save and restore of default ports per profile.
- GStreamer
- Fix a crash with zero SPA_PARAM_BUFFERS_size
- Device support
- v4l2-source will now respect the requested memory types.
- ALSA buffering has been tweaked. USB devices should have
less XRuns by default. Parameters can be tweaked to
decrease the latency on capable devices. Also fix a case
where a quantum change would cause an xrun.
- Fix mute in bluetooth devices
- bluetooth devices are not paused in idle anymore for
improved compatibility.
- Codec switching for bluetooth is implemented along with
config options to select the codecs manually.
- HSP for bluetooth is now disabled by default. Most devices
support the newer HFP profile and some devices fail when
both are available.
- Reduce the amount of events the ALSA plugins emit by bundling
them.
- PulseAudio server
- Implement the suspend command
- Fixes volume in sample info
- Fix playback of samples, sometimes samples would be clipped
short. Also implement the target sink for the sample.
- Use rate match to feed samples. This way the latency can
be kept to a minimum.
- Latency has been tuned some more, more closely emulating
pulseaudio behaviour.
- Improve default sink/source handling. Make sure all events
are sent correctly when defaults change.
- Handle underrun better without causing sync issues. Make sure
to pause in corked state.
- Implement rewind due to seeks, fixes GStreamer seeking.
PipeWire 0.3.20
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Latency was reduced in ALSA and PulseAudio and time
reporting has improved a lot.
- Bluetooth now has a native HFP backed, SBC XQ and
mSBC support.
- Many bugfixes and improvements, improved device
support.
- PipeWire improvements
- pw-dump can now dump all objects such as Endpoints
- pw-dump has a -m option to monitor changes
- pw-dump can now dump metadata
- pw-stream can now use the rate-match io to exactly
produce the required number of samples for the
current cycle. When using this feature, a stream can
achieve the same low-latency as pw-filter.
- spa-acp-tool can now load a custom profile-set and
correctly parses the volume updates
- There is now a nofail option when loading modules
- The connection has been made reentrant to fix some
strange random problems with metadata.
- Turn some errors into warnings or simply info.
- Executables are now built with PIE
- S24OE formats should work now (MAudio FastTrack Pro)
- Remove mlock warnings. Add support for mlockall with
a config option.
- Session-manager
- There are now config files for bluez and v4l2 modules
- Improve ALSA device and node properties
- Bluetooth devices have better properties now.
- The default device routing has been improved.
- Device support
- Port priorities are updated for UCM devices
- ACP devices notify change in routes in all cases
- There is now RW support in ALSA devices to increase
compatibility.
- Many improvements to Bluetooth. SBC XQ support can now
be enabled with a config option. mSBC can be enabled
with an option.
- Bluetooth devices not expose Routes so that they look
more like how PulseAudio handles them
- Gracefully handle missing profile-sets
- There is now a native HFP backend
- Improve card names in some cases.
- pause-on-idle is now disabled for ALSA devices. This can
reduce pops and clicks when the device is stopped.
- ALSA plugin
- Use rate-match to reduce the latency
- Implement a _delay() function to get smoother timestamps.
- Fix property parsing. Fixes volume changes in alsamixer.
- PulseAudio server
- Use rate-match to reduce the latency. This also reduces
the buffering in audioconvert and improves timestamp
reporting.
- Implement rate changes now that we have rate-match
support.
- pactl stats will now work
- Fix excessive memory usage when a capture client doesn't
read fast enough.
PipeWire 0.3.19
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Startup after login should be fixed now with inotify
used to wait for permissions.
- Channels should be mapped correctly now.
- Many bluetooth improvements in LDAC, AptX-HD. AAC was
also added. Headsets should work better now.
- pipewire-libpulse was removed. It is now completely
replaced by pipewire-pulse.
- Fix a crasher bug in pipewire-pulse and some memory leaks.
- Fix a bug with feedback loop that would cause 100% CPU.
- A new pw-top tool to display real-time graph performance.
- The example session manager now has config files.
- The config file format was changed to use the SPA JSON
tokenizer. This makes it more flexible and extensible.
- PipeWire improvements
- Fix debug of id in format channels
- Audioconvert should now remap channels correctly in all
cases.
- Feedback loops were not scheduled correctly and would
cause 100% CPU usage.
- Small improvements to the profiler to also log incomplete
graph status.
- a new tool pw-top was added that prints real-time performance
stats of the graph.
- the rtkit module now sets the nice level to -11
- Session-manager
- The session manager would sometimes link dont-reconnect
nodes to another node, which would leak monitor streams in
pipewire-pulse.
- The session manager now has configuration files. Config files
can also be placed in the user home directory to make custom
configurations.
- The session managers now creates unique device and node
names for alsa and v4l2 devices.
- Device support
- Many improvements in Bluetooth codecs, LDAC stuttering,
AptX-HD negotiation, LDAC ABR support
- Bluetooth supports AAC audio now.
- Many fixes to Bluetooth SCO transport used in headsets.
- inotify support in device monitors
- ACP was synced with the latest pulseaudio code
- Fix a bug in enumeration of device ports.
- PulseAudio server
- seek flags and offset are now supported, making gstreamer
pulse elements work better.
- Fix a crasher bug in pipewire-pulse, we sometimes would
write too much to the ringbuffer
- Fix some memory leaks in error cases.
- Fix handling of NULL string to locate default sink/source
- JACK layer
- Ports can also be found with the aliases now, making
qjackctl work in more cases.
PipeWire 0.3.18
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- More work in the PulseAudio server. It should be compatible
with more applications.
- Bluetooth now support extra codecs such as AptX/HD and LDAC.
- Support for virtual sources and sink was improved a lot.
- Added a new pw-dump tool to dump the objects in JSON formats
and for filtering them with tools like jq.
- Many more stability fixes and improvements.
- PipeWire improvements
- Silence some harmless warnings
- pw-cli can now be used to set parameters.
- Streams now perform the correct channel mapping when linked
to non-standard multichannel devices. Previously channels
would get swapped.
- port, node and device params are now cached in the server.
This avoids opening and closing devices whenever some client
enumerates formats, which improves performance a lot,
especially in cases where opening a device is slow.
- Add a command to keep a device open during negotiation. This
is used to enumerate and set a format while opening the
device just once, improving performance.
- The null-sink scheduling was fixed.
- A memory corruption bug was fixed in format conversion, this
could cause crashes, silent channels or other undefined
behaviour.
- There is now a simple JSON parser.
- Session-manager
- Settings files are now stored in JSON. With the json parser
this is easier to parse and extend
- Device support
- Bluetooth now supports additional codecs: LDAC, AptX and
AptX HD. LDAC is known to not work very well yet.
- ALSA devices will now default to the max supported channels
if nothing else is specified. This makes it possible to use
8+ channel cards with the alsa-pcm module, which is not
supported with the default alsa-acp module.
- Enable mSBC support in oFono.
- Add an option to disable hardware mixers
- ALSA now improves support for batch devices.
- The udev rules had references to Pulseaudio removed in order
to not create conflicts.
- Fix a potential crash in bluetooth devices when
disconnecting.
- UCM cards now use HW volume when possible.
- PulseAudio server
- The id can now be used as the name to locate cards and
devices
- Report streams with planar formats as well
- Better error reporting when stream create fails
- module-null-sink can now handle channels, rate and
channel_map properties
- Add support for 3 types of virtual devices: source,
sink and duplex.
- set-port was fixed
- Some buffer parameters were tweaked to improve
performance, compatibility and stuttering with lower
latency.
- NULL can be used as a name for the device sink/source
- Support lookup of monitor names
- Set properties more like pulseaudio so that some
clients (Teamspeak) don't crash anymore
PipeWire 0.3.17
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Fix crasher bug for kwin when screensharing stopped.
- Massive improvements and compatibility fixes in the
PulseAudio server.
- The session manager now has a config directory in
/etc/pipewire/media-session.d/ It will look for files there
to activate session manager modules. Packagers can use
this to only activate the audio modules when the PulseAudio
server, libjack.so or the alsa modules are installed.
- PipeWire improvements
- We now clear hooks before adding them. Some application
did not clear them and had random data for the destroy
callback.
- Return -ENOENT from unknown resources so apps can handle
this better. It's a common problem when an app tries to
introspect and object but it disappeared before the message
reached the server. Apps should ignore this.
- channelmap information is now passed with the volume
settings.
- DMABuf is not mmapp()ed anymore with the FLAG_MAP_BUFFERS in
the stream or filter. This is because DMABuf usually
requires more that just a simple mmap and is better left
for the application.
- increase the maximum number of ports for a client-node.
- adapter and node-factory now support the linger option to
keep the objects alive after the creating client disconnected.
- Device support
- ALSA now handles error in close(), like when unplugging a
USB device.
- Session-manager
- The session manager is now handling DONT_RECONNECT streams
without a target node. They get connected to a default node
once and then fail to reconnect.
- The session manager now exposes the stream setting as
metadata. This makes it possible for other components, such
as pulse-server to use this information. Information is stored
as a json object for easier consumption.
- The session manager now has a config directory in
/etc/pipewire/media-session.d/ packagers can use this
- PulseAudio server
- Pulse server now acquire the dbus name.
- Improvements in timing and compatibility with many apps.
- The stream-restore extension is now implemented so that
the event volume can be configured.
- Many stability fixes and improvements.
- Fix some issues with module-load/unload
PipeWire 0.3.16
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- Fix screensharing for old 0.2 clients
- Many pulse-server improvements. There is now a
pipewire-pulse binary that is the preferred solution for
PulseAudio compatibility. The replacement libpulse
libraries are now deprecated. This also makes audio in
Flatpak work.
- PipeWire improvements
- Fix cleanup of listeners everywhere. Force remove of
listeners in _destroy to avoid crashes.
- Add support for a journald logger module.
- Various memory leak fixes
- Silence some warnings that spammed the logs.
- Fix flush in pw_stream. This fixes small glitches when
switching streams in music players.
- Various FreeBSD fixes and improvements.
- Fix some crashes when destroying objects.
- Device support
- Reload the ALSA configuration when creating a node so that
hotplugged devices work in all cases.
- Fix memory leaks in ACP library. This also fixes issues
where the mixer device was not closed.
- Bluetooth now has support for the mSBC codec for SCO
source and sink.
- pulse-server
- Many introspection and compatibility improvements. It should
now be as good or better than the replacement library.
- Implement sample cache to make notification events work.
- JACK layer
- handle errors when linking, fixes jack_connect hang when
the ports were already linked.
PipeWire 0.3.15
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- This is a quick update to fix critical issues with the
0.3.14 update, which broke screen sharing and accidentally
enabled the experimental pulse-server.
- Fix some compatibility issues in pulse-server with
pavucontrol and fix an issue that would block the complete
server.
- PipeWire improvements
- Permission checks for new clients are now done from a
global context, which makes it possible to assign initial
permissions to objects.
- Handle EINTR everywhere
- Fix an issue with the node state changes where a quick
pause/play would hang a client.
- Session manager improvements
- Disable the bluez5 and pulse-bridge modules by default because
they interfere with pulseaudio. These options should only be
enabled if pulseaudio is removed or disabled in the system.
- Fix an issue where the session manager could end up in
infinite recursion while scanning for things to do.
- The session manager will now always configure nodes to remix
to the channel configuration of the device. This fixes the case
where mono streams would only end up on one channel of a stereo
device.
- Device support
- Initial merge of A2DP extra codec support using the new bluez5
API.
- pulse-server
- Create the runtime directory when it doesn't exist.
- Don't ever block the server, use non-blocking IO everywhere.
- Fill description of profiles with the name if not otherwise set,
this fixes a crash in pavucontrol.
- the connection debug category will now also debug pulse
messages.
- Respect the no_remix flag to make the control panel channel
check work.
- ALSA plugin
- implement pause
PipeWire 0.3.14
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Highlights
- This release focuses on bugfixes and stability
improvements.
- A new experimental pulse-server module was added. This
module implements the pulseaudio protocol on top of
PipeWire and can be used to make flatpaks work with
PipeWire. It looks like this might be a better way
forward compared to the libpulse.so replacement library.
- A2DP bluetooth was reworked. Playback should work a lot
better now. Support was also added to automatically link
an A2DP source to a playback device, which makes it possible
to use PipeWire as a bluetooth receiver as well.
- Improvements to the routing and volume restore features
of the session manager.
- PipeWire improvements
- The channelmixer does not normalize volumes anymore. Volumes
are only normalized for monitoring streams now.
- Streams can actually start in the inactive state now.
- The channelmixer can now also convert volume updates from one
channel layout to another. This makes saved volumes work
even when streams have different channel layouts.
- Clients are only registered after the properties have been
updated.
- Links now have a new active state.
- Drivers can now also specify a minimum quantum. This makes it
possible for bluetooth devices to specify an optimum quantum
for the given codec settings and MTU.
- The amount of data sent over the socket was reduced by only
sending the data that changed.
- Client objects are now exposed after they uploaded their
properties, which makes the new object more useful.
- Tools improvements
- pw-cat will now add metadata to the PipeWire streams.
- Session manager improvements
- Fix crashes when reading bad data in stored settings.
- volume and routing is improved. Settings are now remembered
per application or media-role.
- The session manager remembers the last device used per stream
- Fix a bug when moving streams where it could sometimes end
up with linking a stream to multiple devices.
- Use RTKit to set realtime priority on the data thread in the
session manager. This improves performance of the pulse-server
and bluetooth devices.
- Add a new property to mark streams that want to capture from
the monitor of the default sink.
- NODE_TARGET can now also contain the node name. This avoids
some lookups in the pulseaudio layer when selecting target
nodes by name.
- the -e and -d options are more usable now and can be used to
add and remove modules from the default list of modules.
- Device support
- v4l2: add some workarounds for buggy drivers. Add Limited
support for droidcam.
- ACP: improve selection of default port and profiles.
- ACP: add support for using the hardware mixer for more than
8 channel streams.
- ACP: support the new port type and availability group found
in PulseAudio.
- A2DP bluetooth timings were reworked. Automatic linking of
A2DP sources was added to make it possible for PipeWire to
act as a bluetooth receiver. The code was reworked to allow
other codecs such as APTX and LDAC in the future.
- Try harder to recover from ALSA errors.
- GStreamer improvements
- Fix some crashes in the monitor that cause
gnome-initial-setup to crash.
- PulseAudio layer improvements
- Many compatibility improvements. Improved playback in
chrome. Fix a crash in firefox when the daemon is stopped.
- Fix a leak in the formats.
- Fix !ADJUST_LATENCY streams like paplay.
- Make the device option in paplay work.
- Fix volume/mute notifications, this makes plasma volume updates
work again.
- Do the conversion between PulseAudio cubic volumes and PipeWire
linear volumes. Volume levels should behave now like they did
with PulseAudio.
- JACK layer improvements
- Return an error when we run out of midi events. Some application
rely on this behaviour.
- ALSA plugin improvements
- The ALSA plugin now also supports the node name in the
playback_node and capture_node properties.
PipeWire 0.3.13
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- PipeWire improvements
- Add pw-reserve tool to reserve or monitor a device on DBus.
- Install spa-resample, a tool to resample a file.
- Install spa-acp-tool, a tool to inspect the card profile.
- Various fixes and improvements
- Fix a bug in pw-stream where a capture stream could run out
of buffers and become silent.
- Rework the processing loops in the adapter and stream. There
is now less latency in PulseAudio and ALSA layers.
- Session manager improvements
- Improve the device reservation code. We now try to acquire
the device using the dbus device reservation API before we
probe the device. This avoids conflicts with a running
PulseAudio where devices would disappear (because they were
locked by the other process).
- Don't fail on invalid input from the config files.
- Audio devices now have the same name as what PulseAudio
would assign.
- Device support
- v4l2: try to use the format before enumerating the size and
framerate. Some drivers don't check the format and might now
work better.
- v4l2: Fall back to MMAP when EXPBUF fails. Fix MMAP access,
just export the fd and the mapoffset. This should make more
devices work.
- Fix crash in ALSA Card Profile (ACP) code.
- ACP: fix selection of default profile. Prefer any possibly
available profile over 'Off'. This makes some card at least
start with something.
- Fix soft volume. After setting the volume to 0, it would stay
at 0 until pushed over the max volume. This should fix
various volume related issues.
- PulseAudio layer improvements
- Rework the buffering and latency measurements and tweak the
buffer attributes. This should make browsers and media
players work better. This should also improve speechd
performance.
- JACK layer improvements
- Fix compilation against newer JACK.
PipeWire 0.3.12
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- PipeWire improvements
* the channelmap converter now handles unknown and strange
channellayouts much better.
* the resampler is now cleared correctly, avoiding clicks and
pops at the start of sound.
* Fixes for various crasher bugs. (paplay drain, vlc shutdown,
pactl info, ...)
* Fix a race condition in the node state changes that caused
all kinds of sync and other issues (vlc, mpv, ...)
* Improve the binary name property of applications
* Fix the scheduling again of nodes that always need a driver
such as the jack clients.
- Session manager improvements
* fix routing to default nodes. Sometimes nodes were not routed to
the default node (bluetooth)
- Device support
* disable channelmap from ALSA by default. This is what PulseAudio
does and thus provides better compatibility.
* fix a bug in how the resampler was used in the ALSA source,
causing distortion and errors when using low latency capture
clients. (Discord, webrtc, ...)
* Small bluetooth improvements. More work is needed for reliable
bluetooth playback.
- GStreamer plugins
* the device provider now stops the processing loop before shutting
down, which avoids crashes (gnome-initial-setup).
- PulseAudio layer improvements
* the buffer attributes were reworked to ensure compatibility with
many more applications such as mpv and audacious.
* the pulseaudio layer will now try hard to not hand out invalid
channel maps to the application. (avoids crashes in
gnome-volume-control). The channel map will now also look more
like what PulseAudio does.
* the @DEFAULT_SINK/SOURCE/MONITOR@ wildcards now work. This
fixes the problem with volume keys when they are bound to
scripts using pactl and the default sink/source wildcards.
* the PIPEWIRE_LATENCY environment variable now works again
* Fix some leaks of ports and port info. Also fix the leak of the
context when the mainloop is stopped.
* The sink/source format_info array is now filled up completely,
this is actually not implemented yet in the real PulseAudio.
- JACK layer improvements
* jack now returns version 3.0.0 and has PipeWire in the version
string so that apps can report this.
PipeWire 0.3.11
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- PipeWire improvements
* Properly cleanup the mixer structures when a port is removed,
this should fix client crashes related to port config changes
and other random crashes.
* Optimize the preferred formats in the audio converter. Higher
quality formats with higher performance are chosen first.
* Make sure the time reported by pw_stream is always increasing,
even when the driver and clock changes.
* There is now also a system service and socket that can be used
to enable PipeWire systemwide. This is however not recommended
and disabled by default.
* Fix channelmixer 5.1 to stereo mix matrix. It was not reading
the conversion matrix correctly and cause channels to be
dropped. The channelmixer will now also normalize the volume,
like what pulseaudio does.
* The channelmixer will now just copy channels when no layout
has been given. It has also optimized paths for this. This
makes it possible for apps to request > 8 channels from the
alsa plugin (ardour).
* Port, Node and Link will now also emit an error on the
resources in addition to updating the error in the info. This
would make it easier to track negotiation errors in the session
manager later.
* many small fixes and cleanups.
* Fix compatibility:
+ DOSBox: fix crash because of double free in pw_stream
- Session manager improvements
* The session manager will now try to configure the client to
the channel configuration of the sink/source. It will only
do this for downmixing, never for upmixing and also never
when the client has the dont-remix property set. It will
also renegotiate the channel layout when moving a stream to
a new sink/source.
* Configuration state is now saved in XDG_CONFIG_HOME.
Previously it was saved in $HOME/.pipewire-media-session/
You can migrate the state by moving the files to
$XDG_CONFIG_HOME/pipewire-media-session (or
$HOME/.config/pipewire-media-session as a fallback when
XDG_CONFIG_HOME is not set).
- Device support
* Bluetooth sources and sinks should work better now.
* There is now also a new bluetooth backend using hsphfpd.
* fix the ALSA UCM Off profile for alsa pcm devices
* improve ALSA port and profile switching. The ACP device will
now switch to the best port and profile when availability
changes.
- PulseAudio layer improvements
* Implement some more callbacks. The pulse layer will now also
notify applications of stream moved, started and latency
changes.
* Fix error code when an object was not found. We now return
PA_ERR_NOENTITY instead of PA_ERR_INVALID.
* Add some support for loading new null sinks. Applications such
as pulseeffects use this. Note that pulseeffects does not yet
work reliably but can start now.
* Improve handling of profile and port updates, it should work
much more reliable now. Apps should now also again receive
volume updates from sinks/sources.
* Fix compatibility:
+ openal-soft 1.20
+ pavucontrol (checks PA_ERR_NOENTITY)
- JACK layer improvements
* improve default source and sink handling. It was not updated
correctly in all cases.
* add samplerate and period to the pw-jack wrapper to easily
configure the desired samplerate and period for the app.
- ALSA plugin improvements
* Add a mixer entry in the alsa config file.
* Implement support for planar types, rework the processing
function to make it more robust.
* refuse to load the alsa plugin when linked against 0.2. This
catches some old apps linked against 0.2 that want to use the
alsa plugin.
* Fix compatibility:
+ linphone (ALSA SIGFPE when _status() is called
before _prepare()).
PipeWire 0.3.10
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Many improvements to the pulse layer.
* GStreamer pulsesink element now works.
* Fixes some segfaults.
* Enable rtkit for client threads.
* fixes capture of monitor stream by name
* implement some more extensions, this makes paman
work and removes some warnings.
- Many improvements to the GStreamer elements
* negotiation rework, avoid calling GStreamer methods from
the PipeWire callbacks because they might block and cause
deadlocks.
* Add support for non-string property values.
* improve stability after buffer and format
renegotiation.
* Rework the device provider.
* pipewiresink can now provide a stream that can
be consumed by apps like cheese.
- Many improvements to the JACK layer:
* Rework the buffer_size callbacks. Make sure we call
the callback from a 'safe' thread and that we don't
call the process callback while the application is
handling the callback. This improves stability in
apps like Carla when PipeWire dynamically changes
the buffer size.
* Improve compatibility with apps that call
get_buffer_frames() with a 0 size (calfjackrack)
* JACK can now create nodes that can be set as a
sink/source in PulseAudio/ALSA apps (you can make an
effects rack and set that as default sink for
apps).
- Added a group id property for nodes. This makes it
possible to schedule nodes with the same driver even
when they are otherwise not linked together. To make
this work well a new flag needed to be added to nodes
to signal when they are ready for processing.
Together with the GStreamer fixes, this makes things
like:
gst-launch-1.0 -v pipewiresrc path=51 stream-properties="props,node.group=1" !
audio/x-raw ! pipewiresink stream-properties="props,node.group=1"
work as expected with PipeWire managing the resampling
to keep the clocks of the devices in sync.
This can later also be used to force devices to be grouped
together to create a JACK-like scheduling group.
- Streams and filter now use PIPEWIRE_NODE and
PIPEWIRE_LATENCY env variables as fallback.
- ACP add per device port list. This makes UCM devices
expose the right ports.
- Fix some segfaults in ACP and UCM.
- make pw-cat use the metadata to find default devices.
- The media session can now save and load audio device
Profiles and Routes (volumes), stream volumes and
the default sink and sources.
PipeWire 0.3.9
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Fix bad audio in chrome
- Remove some errors that are not real errors.
- Fix 100% cpu when disconnecting devices.
- Improve pulseaudio introspection of formats
- Fix JACK metadata handling, carla can now monitor the
port it creates and insert midi.
- Add a new permission bit (M) that is needed to be able
to configure metadata on an object. Improve security of
metadata some more, only allow metadata on objects that
are visible to the client setting the metadata.
- Add support for videocrop in the GStreamer elements.
- Improve handling of the runtime directory for the
server sockets. Add some reasonable fallback when
XDG_RUNTIME_DIR is not set, as suggested in the spec.
- Improve ALSA device names from ACP.
- Fix various crasher bugs. One in the pulse layer, one in
the session manager.
- Make alsa plugin respect the PIPEWIRE_REMOTE env variable.
- Various compile fixes.
PipeWire 0.3.8
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Fix an embarrassing crasher in the JACK layer when
metadata keys were removed.
- Make it possible to add properties to jack clients with
a PIPEWIRE_PROPS env variable. This can be used to make
JACK nodes look like a device (like an effects rack).
- Improvements in the session manager in how it links
ports. Now it will try to link matching channels first
and be more intelligent otherwise. The session manager
will also configure the stream to the device port
configuration when needed.
- Add ofono backend for Bluetooth HeadSet support.
- Improve default source and sink handling. They are now
stored with their id, instead of name, in the metadata.
This makes it work better with JACK because of JACK's
limited name length.
- Improve environment variables to make it possible to
create and connect to servers other than "pipewire-0".
Implement this in pulseaudio, JACK and alsa layers.
- Add an alsa mixer plugin so that alsamixer works with
PipeWire. It will configure the default source/sink
volumes.
- Fix capture devices. There was something wrong with how
the resampler was used that caused corruption in the
signal when the resampler was active.
- We now ship alsa card paths, profile-sets configuration
files and udev rules so that we don't have to rely on
the pulseaudio ones.
- Many build and stability fixes.
PipeWire 0.3.7
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Improved PulseAudio compatibility. The alsa card profile
code was reused from PulseAudio. Devices now support
all profiles, ports, jack detection, UCM and hardware
mixers that PulseAudio implements. There should not
be (almost) any difference between PipeWire and PulseAudio
in how it presents and manages devices.
Other missing API pieces such as the default sink/source
and move_stream are implemented now. At this point
it should be possible to replace PulseAudio with the
compatibility layer for those who want to try.
- Many fixes and improvements to the GStreamer elements.
pipewiresrc now has the ability to periodically resend
the last frame. This makes it possible for use-cases like
screensharing to only update the screen on changes while
still keeping the client side encoder busy. PipeWire
elements can now also share a connection between them.
- Improvements to the bluetooth nodes. Dynamically adding
and removing devices should work much smoother now. Many
fixes and improvements to a2dp and sco nodes.
- Reduced memory usage by using less pre-allocated memory
where possible. JACK clients are especially using less
memory.
- Support for passive links is added again. These are links
that don't cause the associated driver to become active.
This makes it possible to have blocks of effects+sinks go
to suspend as a group when not in use.
- Both consumers and producers can now ask to renegotiate
the format. This required some cleanups and improvements
to how links and node states were handled. More work is
needed to implement more use cases.
- Important fixes to how memory is shared with clients. Memory
was not correctly freed in all cases, which would result
in reuse of the wrong memory.
- Support for planar formats for audio and video was added.
- Improved error handling in the session manager.
- Metadata is now used to manage default audio source and
sink devices. The session manager will try to link streams
to the default device. Changing the default device will
move streams to the new device. PulseAudio and JACK layers
respect the default source/sinks.
- Metadata is used to tag the desired output device for
a stream and the session manager will move streams when
the metadata changes. The PulseAudio layer uses this to
implement the move_stream feature.
- Many fixes to the security modules. The session manager now
has a flatpak module that grants permissions to flatpak
apps. The PulseAudio layer now respects the permissions of
objects. Security related properties are made read-only
now. Different access modules can now coexist.
- The portal module has been split up in 2 parts:
1) a part living in the daemon that monitors the portal
dbus owner and tags all clients from this PID. This
part has to run in the daemon in order to securely
tag the clients.
2) a part in the session manager that uses the permission
store to manage the permissions of portal managed
clients.
PipeWire 0.3.6
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Extensive memory leak fixing and stress testing was done.
A big leak in screen sharing with DMA-BUF was fixed.
- Compile fixes
- Stability improvements in jack and pulseaudio layers.
- Added the old portal module to make the Camera portal
work again. This will be moved to the session manager in
future versions.
- Improvements to the GStreamer source and sink shutdown.
- Fix compatibility with v2 clients again when negotiating
buffers.
PipeWire 0.3.5
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Compiler fixes
- Add pw-midiplay and pw-midirecord aliases
- Add pw-mididump tool
- Add pw-metadata tool to inspect, add and remove metadata
for objects.
- Docs updates, man pages
- install alsa config files
- Fix linked sink/source in pulseaudio
- ratelimit graph processing warnings
- improve buffer handling in GStreamer elements
- Fix power usage by removing the queue for the alsa
sequencer system announce messages.
- Fix metadata clear() method dispatch.
- Improve parameter enumeration, make it possible to detect
missing parameters vs no-compatible parameters so that we
can use defaults in the first case and error in the second
case.
- Fix cleanup of proxy objects. Stability improvements on
plug/unplug in session manager.
- Make it possible to set log level from config file
- improve debug of param negotiation errors. Log the
parameters to stderr/journal.
- Make it possible to configure global logger
implementation.
- Fix NEON detection
- JACK and PulseAudio compatibility improvements
PipeWire 0.3.4
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- A quick update with some important stability fixes.
PipeWire 0.3.3
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- NEON optimizations for audio conversion (32 and 64 bits)
- rework of session manager implementation
- Add option to disable modules in the session manager
- Release midi hardware devices when suspended
- various build fixes
- Clean up options of various utils
- Stability improvements
- Mayor improvements in pulseaudio emulation. Improved
timings and compatibility.
- Implementation of drain and flush in pulse and alsa
emulation.
- Implement poll on file descriptors.
- Improvement of metadata for jack emulation.
- Fix memory and thread problems in jack emulation.
- Simplification of state changes. Should make more use
cases work in the jack emulation.
- Improvements in the gstreamer elements. Removal of
extra internal queue. pipewiresink can now be used to
play audio.
- Add pw-jack and pw-pulse scripts to run pulseaudio and
jack applications with the right library path.
PipeWire 0.3.2
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- build fixes
- Added support for data type negotiation. This makes it
possible for a client to say that it can handle DMABuf
and MemFd and then let the server select a compatible
format.
- Handle errors when enumerating parameters better.
- Add support for rate, format, channels and period_bytes
to the alsa config file to restrict what alsa apps can
negotiate.
- Fix JACK midi output.
- Optimizations in common audio format conversions using
AVX2. Small optimizations to plugins.
- Change the vulkan compute example to an MIT licensed
shader.
- Remove some hardcoded defaults in the audio and video
processing and use the values from the processing
context. This also fixes the vulkan example.
- Correct the documentation and defaults in the daemon
config file.
- Fix alsa and v4l2 buffer recycle. A paused client could
cause the server to leak all buffers.
- Remove some warnings that should be ignored.
- Fix a crash in the bluez5 plugins.
- Try to select higher quality formats first when
negotiating a format with an audio device.
- Fix an infinite loop in udev detection in some cases.
- Add non-interactive mode to pw-cli. You can now just
do "pw-cli ls Port" to get a listing of all ports.
pw-cli will now also connect to the default server by
default and has options to select a different server.
- Allow the server to go up to the maximum quantum (8192
samples or ~=180ms) if a client explicitly wants this.
PipeWire 0.3.1
This is a bugfix release that is API and ABI compatible
with previous 0.3.x releases.
- Don't load the rtkit module by default. It can cause a
sigkill, which is not desirable for mutter, for example.
Only enable this for the jack library for now.
- Don't use pthread cancel by default because it uses a
signal that might crash some apps. Only use it for
the jack library because jack clients really expect this.
- Build fixes for -Werror=suggest-attribute=format
- improve error messages, don't report harmless errors and
warnings. Try to send error messages to the proxy that
started the operation or is the owner of the object.
- pw-cat: midi improvement, add midi recording and dump
in verbose mode
- fix properties when loading spa-nodes from the config
- Fix and update some examples
- jack: check arguments and don't crash when invalid
- Fix buffer memory upload.
- jack: fix compatibility with zrythm. Fix timemaster
install, improve sample_rate callback. Fix reposition
handling.
- fix crash in port after buffer negotiation error.
- add support for control ports in pw_filter
- fix cleanup of the metadata module
- improve param enumeration.
- Clear stream buffers when the format is cleared.
- Add create-object command in the config file to create
object from a factory.
- Fix crash after the driver was not removed from unassigned
nodes. Also properly pause inactive nodes.
- Use "true" and "false" in properties when we are talking
about a boolean.
- pulseaudio: improve compatibility
PipeWire 0.3.0
The 0.3 release is a major milestone in the development of
PipeWire. It features a complete redesign of the scheduling
mechanisms that make it possible to run a JACK compatibility
layer with comparable performance to JACK2.
The API has been reworked and is declared stable now. All
development files and runtime paths are versioned so that
future incompatible changes can be done without breaking
existing applications.
PipeWire 0.3 also includes a (now mandatory) session manager
that populates and controls the PipeWire graph. This example
session manager is very simple and not configurable. It is
expected that future version will either switch to a more
flexible session manager (like WirePlumber) or improve the
configuration options of the example session manager.
PipeWire 0.3 includes both PulseAudio, JACK and ALSA
compatibility libraries that are known to support a wide range
of applications. The ALSA library is pretty complete at this
point. The JACK and mostly the PulseAudio compatibility
libraries need more work. See the Wiki pages for the current
compatibility problems. We do not yet encourage people to
switch away from their existing audio solutions (PulseAudio
or JACK) but we would love to hear from people who try it
anyways. Future versions will mostly focus on improving
compatibility further to make PipeWire a drop-in replacement.
PipeWire comes with some GStreamer plugins to consume and
produce data for PipeWire. The consumer (pipewiresrc) is
working well in most cases. The sink (pipewiresink) is known
to be somewhat problematic for now.
PipeWire 0.2.97
Eighth pre-release for upcoming 0.3:
- Build fixes
- pw-cat improvement: Fix remote name, add midi support
- add device subscribe params for completeness
- jack and pulseaudio compatibility fixes
- Fix a bug in resampler, add quality option, tweaked quality
settings, tested now against https://src.infinitewave.ca/
testsignals and submitted results for publication.
- Fix awkwardness in buffer negotiations, the default number of
buffers was 4 and jack could only handle 2, causing
corruption. Also implement negotiation of Step ranges.
- Fix device reservation to work together with pulseaudio,
previously we would block pulseaudio.
PipeWire 0.2.96
Seventh pre-release for upcoming 0.3:
- jack: improve compatibility
- Fix unit test
- Fix license of jack and alsa libs
- Make start/stop more threadsafe
- Fix rt-kit again, add params to configure things, increase default
soft/hard limits to avoid being killed.
- version 0 compatibility improvements, tested with firefox, cheese,
GStreamer and chrome using compat layers.
- Fix timing for gstreamer source
- Require libspa in pkg-config file
- Limit buffers to 16 to support old clients
PipeWire 0.2.95
Sixth pre-release for upcoming 0.3:
- Fix tests for big endian some more
- Improve v2 compatibility mode: improve type negotiation and
update_permissions
- Workaround for firefox screen sharing
PipeWire 0.2.94
Fifth pre-release for upcoming 0.3:
- Fix man page names
- Fix jack set_sync_timeout
- Improve JACK compatibility with apps that cache buffer pointers.
- Improve mlock failure warning message, add property to configure
if mlock should be used.
- Improve OBJECT_PATH in alsa objects
- Install in versioned directory
- Add pw-profiler tool
- Improve pulseaudio compatibility wrt pa_operations
- Thread safety fixes in remote nodes when activating/deactivating
- Improve JACK names on duplicates
- Add option to ignore failure when loading modules
PipeWire 0.2.93
Fourth pre-release for upcoming 0.3:
- Fix unit tests on 32 bits
- Append -pw version to pulse and jack libs. This way we can install
it next to the real libraries and use a symlink to enable it.
- Improve jack support by killing threads with pthread_cancel. This
then also remove the eventfd from the data-loop, making it
maybe a little faster.
- Fix jack_client_close() compatibility
- Fix some segfaults in the session manager
- Improve debug of protocol messages
- Add examples options
- Don't fail when alsa is not found
- Fix some compiler warnings with a new spa_aprintf() helper.
- Add pw-cat, the simple audio playback/record tool
- Rename pipewire tools to pw- prefix
- Add improve pw-cli object dump feature
PipeWire 0.2.92
Third pre-release for upcoming 0.3:
- Improve old version check some more
- Fix unit tests on little/big endian
- Fix compilation when CPU has no optimisations
- Install jack and pulse libraries
- Handle -EACCESS in flatpack access module
PipeWire 0.2.91
It is mostly a bugfix release to make the new version install and
run correctly in distros.
- Install session manager, fix path to find the session manager
- Fix alsa buffer reuse
- Small fixes for crasher bugs
- Implement pw_core_set_paused() to suspend/resume even
processing. This can be used when using multiple connections
to a daemon and one needs to pause one connection until the
other one completes an action. Used by session managers.
- Improve old version check
PipeWire 0.2.90
This is the first pre-release of the 0.3 version. It consists of a
major rewrite and is not API or ABI compatible with the 0.2
branch.
PipeWire 0.2.7
This is mostly a bugfix release and is API/ABI compatible with
previous 0.2 versions.
Work is ongoing in the work branch that features a completely new
scheduling method that will enable audio support. Some of these
API changes are backported in this branch.
- Add support for alsa-lib 1.1.9 which changed the include path
- Improve error checking and reporting in the protocol
- deviceprovider: fix probing without starting
- add sentinel to some functions
- compiler fixes for musl
- Revert object tree permission checks that broke things, this is
probably not a good idea (and the tree of objects is going to
be removed later)
PipeWire 0.2.6
- Improve error checking for threads
- Fix some memory and fd leaks
- Fix compilation with C++ compilers and clang
- DISABLE_RTKIT should now not try to use dbus at all
- Camera Portal fixes:
- add Camera media.role
- Rename module-flatpak to module-portal
- Use the portal permissions store for camera checks
- Actually use the passed fd in pipewiresrc
- Make properties with "pipewire." prefix read-only
- Add security label to client object
- Enforce link permissions
- Permissions of objects are now combined with parent permissions
- Remove libv4l2 dependency, it is not used
- Improve format negotiation in autolink #146
- Try to avoid list corruption with event emission #143
- Fix destroy of client-node memory corruption
- Various small improvements
PipeWire 0.2.5
- build fixes for systemd
- Add cursor and bitmap metadata. This can be used to send a cursor
sprite with the video stream.
- permissions were set too strict for non-flatpak clients
- Fix crash in loop caused by thread unsafe hook emission
- Add more error checking for thread-loop
- Small cleanups and bugfixes
PipeWire 0.2.4
- Install man pages in right directory
- Add systemd socket activation
- Various memory leak and corruption fixes in properties, dbus and
buffer mmapped memory.
- Fix v4l2 crash on unplug
- improve stream cleanup
PipeWire 0.2.3
- Fix deviceprovider caps introspection
- Refcounting fixes in pipewiresrc
- Remove clock interpolation from stream
- Improve clock in gstreamer elements
- Remove spalib
- Fix crash with pw_map
- Add version number to hook list
- Improve driver mode in gstreamer elements
- add daemon options
- add man pages
PipeWire 0.2.2
- Increment API version and .so version
PipeWire 0.2.1
- Various fixes to memory handling
- Fixes for shutdown
- v4l2 fix enumeration of frame intervals
- Make the daemon stop when the setup commands fail
- Improve safety of hooks
- Update stream API to more future proof version
- Add more options to stream API such as scheduling in the
main thread and automatic mapping of buffers
- Add version file and macros to check compile time and
runtime versions of pipewire
- Future proof some structs
PipeWire 0.1.9
- Various build fixes
- Do more permission checks
- Add support for doing async connections. This can be used to
make connections through the portal later.
- Fix device creation from the GStreamer device monitor
- v4l2 experiment with controls
- move rtkit to a module to avoid dbus dependency
- use dmabuf allocator in gstreamer elements
- Add DSP module for pro audio cases, remove jack module. The
idea is to make a replacement jack client library that talks
pipewire directly instead of trying to emulate a jack server.
- Various memory handling improvements
Generated by dwww version 1.15 on Sat May 18 14:13:06 CEST 2024.