****** Release of sane-backends 1.0.16. End of code freeze ******
2005-08-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: New version 1.0.16.
2005-08-05 St�hane Voltz <stefdev@modulonet.fr>
* backend/genesys.c: Fixed endianness issue in slope table
generation. Tested ok on x86 architecture.
2005-08-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/sane-backends.da.po: Updated Danish translation (from
Mogens Jaeger <mogensjaeger@get2net.dk).
2005-08-02 Mattias Ellert <mattias.ellert@tsl.uu.se>
* po/sane-backends.sv.po: Update Swedish translation
2005-08-01 Eddy De Greef <eddy_de_greef at tiscali dot be>
* doc/sane-mustek_pp.man: updated URL for additional CIS driver info.
2005-07-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Updated.
---- CODE FREEZE FOR SANE 1.0.16 ---
2005-07-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Disabled compilation warnings.
2005-07-30 Karl Heinz Kremer <khk@khk.net>
* backend/epson_usb.c: Applied Olaf Meuwissen's patch to add
new device IDs.
2005-07-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Xerox Workcentre
470cx. Added link for Canon DR-2080C.
* backend/Makefile.in: libsane and documentation is installed
correctly again.
* acinclude.m4 configure configure.in: Avoid error messages in
locking test. Make sure that io/cam/cam.h header file will be
detected correctly.
2005-07-29 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/sane-teco2.man: text update
doc/descriptions/teco2.desc: update status VM3564
doc/teco/teco2.txt: text added
backend/teco2.c: removed teco_request_sens command for VM3564 (bug)
backend/teco2.h: text update
2005-07-29 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added various Epson IDs from Olaf
Meeuwissen; reodered some misplaced Epson entries.
2005-07-29 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added Visioneer OneTouch 7300
(0x0444,0x0211), from Derek J Frye.
2005-07-25 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions-external/epkowa.desc: Updated according to
the info provided by Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
2005-07-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/brother2.desc: Brother DCP 7025 is
reported to work (bug #301960).
* doc/descriptions-external/hp_rts88xx.desc: Moved unsupported
devices to unsupported.desc.
* doc/descriptions-external/hp3770.desc
doc/descriptions-external/hp8200.desc: Added external hp3770 and
hp8200 backends.
* doc/descriptions/unsupported.desc: Added unsupported scanners
from hp_rts88xx.desc. Removed HP ScanJet 3770 (now in hp3770
backend). Added Lexmark X75 PrinTrio.
2005-07-22 Giuseppe Sacco <eppesuig@debian.org>
* italian translation update
2005-07-22 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added HP ScanJet 7400C (0x03f0,
0x0801), from Thomas Nadolny.
2005-07-21 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Bumped build number.
* backend/plustek-usbcal.c: Fixed lampsettings for CIS devices.
2005-07-15 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-options.c: Change TPO range for Epson 2480/2580 to
55x80mm^2 which is the working range for the 2580. Re-enabled
2400 DPI for 2480/2580.
2005-07-15 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-mutex.c backend/snapscan-usb.c: Changes to support
SANE on ZETA.
* backend/snapscan-scsi.c: Fix compiler warnings.
---- FEATURE FREEZE FOR SANE 1.0.16 ---
2005-07-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* Makefile.in backend/Makefile.in tools/Makefile.in: Make sure
that all the necessary files will be in the distribution .tar.gz
file.
* sanei/sanei_scsi.c: Removed "const" to make gcc on OS/2 happy.
* NEWS: Updated.
2005-07-15 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/sp15c.c: Better 4->8 bit depth expansion algorithm (from
Mattias Ellert <mattias.ellert@tsl.uu.se>).
* sanei/sanei_usb.c: Fixed comment (we still use 30 seconds USB
timeout by default).
* README.zeta configure configure.in Makefile.in backend/Makefile.in
backend/artec_eplus48u.h backend/dll.c backend/plustek-pp_scan.h
doc/Makefile.in frontend/saned.c include/sane/config.h.in
po/Makefile.in sanei/sanei_config.c sanei/sanei_config2.c
sanei/sanei_init_debug.c sanei/sanei_pio.c sanei/sanei_thread.c
sanei/sanei_usb.c: Changes to support SANE on ZETA. Not all
patches have been applied yet, but it's a start. The backends
are not installed as shared libs but as add-ons, which are shared libs
but in a specific folder in [/system|~]/config/add-ons/ named SANE/.
The install target has been changed to account for this,
Some files don't exist in BeOS/ZETA (ipc.h, ...).
Backend function names get a prefix, I suppose to avoid namespace clashes.
Though we do have a libdl to implement dl_open, the native way is preferred.
Added a --with-docdir= configure arg.
BeOS has a broken get[name|addr]info() from bind. This is fixed in ZETA R1.
libtool needs -no-undefined. Various VPATH fixes.
Check for <be/drivers/USB_scanner.h>, but not used yet.
No S_IFSOCK (sockets are fds to /dev/net/api). Stub pio code, untested.
Patch from Fran�is Revol <revol@free.fr>.
2005-07-15 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/snapscan.desc:
updated comments for Epson 1670, 2480 and 2580
2005-07-15 Rene Rebe <rene@exactcode.de>
* backend/avision.h, backend/avision.c, doc/sane-avision.man,
doc/descriptions/avision.desc: updated the Avision backend with the
latest off-site maintained version: fixed segmentation faults for
some modes, many many new devices, two different duplex modes
are supported, vast speedup of multi page batch scans, buttons as well
a 7-segment LED readout and some quirks for old scanners not filling
all fields
2005-07-15 Rene Rebe <rene@exactcode.de>
* include/sane/sanei_usb.h sanei/sanei_usb.c: Added support to set
the USB timeout.
2005-07-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx_devices.c
backend/gt68xx_generic.c backend/gt68xx_high.c
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
doc/gt68xx/gt68xx.TODO: Changed resolution from 75 to 100 dpi
and changed 16 bit/color to 12 based on a user report for the
Visioneer OneTouch 7300. Updated .desc. Moved check for stable
lamp to its own function. Mustek ScanExpress A3 USB: Use CIS
calibration. Use lamp warmup. Fixed CCD on GT6801 scanning (color
scanning was broken due to a change in motormode_2.
2005-07-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/Makefile.in po/sane-backends.bg.po po/sane-backends.cs.po
po/sane-backends.da.po po/sane-backends.de.po
po/sane-backends.es.po po/sane-backends.fi.po
po/sane-backends.fr.po po/sane-backends.it.po
po/sane-backends.nl.po po/sane-backends.no.po
po/sane-backends.pl.po po/sane-backends.pt.po
po/sane-backends.ru.po po/sane-backends.sv.po: Updated Danish
translation (from Mogens Jaeger <mogensjaeger@get2net.dk>). Made
sure that no errors occur because xgettext/xmsgfmt think that
"%" is a C format string. Regenerated all po files.
* configure configure.in include/sane/config.h.in: Make sure that
getopt is not built on OS/2 (from Franz Bakan <fbakan@gmx.net>).
2005-07-07 Frank Zago
* AUTHORS backend/leo.c backend/leo.h backend/matsushita.c
backend/matsushita.h backend/sceptre.c backend/sceptre.h
backend/teco1.c backend/teco1.h backend/teco2.c backend/teco2.h
backend/teco3.c backend/teco3.h frontend/tstbackend.c: new
email address.
2005-07-07 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Fixed scanarea calculation.
* backend/plustek-usbshading.c: Fixed fine-white calibration.
2005-07-05 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions-external/epkowa.desc: Updated according to
the info provided by Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
2005-07-04 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.[ch] backend/plustek-usbscan.c
backend/plustek-usbshading.c backend/plustek-usbdevs.c
backend/plustek-usbdevs.c backend/plustek-usbimg.c
backend/plustek-usbmap.c backend/plustek-usbhw.c
backend/plustek-usbcal.c backend/plustek-usb.[ch]:
Added button support, did some cleanup, added IPC between
reader- and parent-process.
2005-07-04 ULrich Deiters <ulrich.deiters@uni-koeln.de>
* inserted a definition for SSIZE_MAX in backend/canon.h
2005-07-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/sm3600.c: Don't check the result of
usb_find_busses(). Based on patch from Julien BLACHE
<jb@jblache.org>.
* doc/descriptions/genesys.desc: Used
"Medion/Lifetec/Tevion/Cytron" as manufacturer as in the other
backends. Used "ScanJet 2300C" as model name as in other
backends.
* doc/descriptions/unsupported.desc: Added links to scanners with
GL646 and GL841 chipsets. Moved all unsupported scanners from
doc/descriptions-external/genesys.desc to unsupported.desc. Minor
fixes for other scanners.
* doc/descriptions-external/genesys.desc: Removed. Scanners have
been moved to doc/descriptions/genesys.desc and
doc/descriptions/unsupported.desc.
* doc/sane-genesys.man: Typo/formatting fixes.
* NEWS: Updated for sane-backends 1.0.16.
2005-07-01 Ulrich Deiters <ulrich.deiters@uni-koeln.de>
* restored the actual version of the Canon-SCSI backend
(backend/canon.c, canon-sane.c canon-scsi.c canon.h)
2005-06-30 St�hane Voltz <stefdev@modulonet.fr>
* configure.in AUTHORS backend/dll.conf doc/sane.man doc/Makefile.in
po/Makefile.in : Fixed forgotten modifications when adding the
genesys backend
2005-06-30 Gerhard Jaeger <gerhard@gjaeger.de>
* tools/RenSaneDlls.cmd backend/dll.c: Fixed OS/2 restriction for
dlopening DLLs on OS/2, as it only works for 7.3 filenames for
some reason (patches by Franz Bakan <fbakan@gmx.net>.
2005-06-27 St�hane Voltz <stefdev@modulonet.fr>
* configure doc/sane-genesys.man doc/sane-genesys.man doc/Makefile.in
doc/descriptions/genesys.desc doc/descriptions/unsupported.desc
backend/genesys_low.h backend/genesys_devices.c
backend/genesys_gl841.c backend/genesys_gl646.c backend/genesys.h
backend/genesys.conf backend/genesys.c backend/Makefile.in
2005-06-27 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek.c: Fixed "double free" problem in sane_exit.
* doc/plustek/Plustek-USB.changes: Update.
2005-06-26 Mattias Ellert <mattias.ellert@tsl.uu.se>
* po/sane-backends.sv.po: Update Swedish translation
* tools/Makefile.in: link sane-desc to $(LIBLIB)
2005-06-12 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Removed Samsung SCX-4216F
(supported by samsung backend). Dell 1600n has also network
connection.
* doc/descriptions-external/brother.desc: Removed misleading
comment.
* doc/descriptions-external/samsung.desc: Added several models,
updated others.
* doc/descriptions.txt: Added "Ethernet" to list of possible
interfaces.
2005-06-12 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Canon CanoScan LiDE
500F.
2005-06-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Genius ColorPage-SF600.
* doc/descriptions-external/brother2.desc: New. Listed scanners
supported by the new external brother2 backend.
* doc/descriptions-external/brother.desc: Fixed comments.
2005-05-30 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Added CX-4600
2005-05-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/samsung.desc: Status of Samsung
SCX-4100 is "good" asit's reported to work.
* doc/sane-usb.man doc/sane.man: Updated, mostly concerning kernel
scanner driver (deprecated). Minor fixes.
* backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c
backend/gt68xx_low.h doc/sane-gt68xx.man
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
doc/gt68xx/gt68xx.TODO:
Start exposure with the settings from the scanner entry. CIS
Calibration and exposure uses a broader spectrum now. Expsoure
limit is increased to 50 loops. Genius Vivid 4x is reported to
work so the UNTESTED label is removed now. Visioneer 7300 is
reported to work so the UNTESTED label is removed now. Genius
ColorPage Vivid 1200XE: Removed UNTESTED label. Fixed
resolutions. Adjusted margins. Fixed color order. Fixed
linedistance. Adjusted AFE. Mustek ScanExpress 1248 UB: Fixed
margins. Adjusted AFE. Adjusted exposure. Adjusted
gamma. Changed status to "complete". Mustek BearPaw 2400 CU
Plus: Adsusted exposure and AFE parameters. Hopefully stripes
and similar trouble are gone now. Mustek BearPaw 1200 CU:
Increased exposure to avoid vertical lines. Updated manual page.
2005-05-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Avision DS310F. Added link
for the UMAX Astra 4000. Fixed missing link for Genius
ColorPage-Slim 1200 USB2.
2005-05-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/net.tex doc/sane.tex: Mention RPC codes explicitly and
explain what request and reply means. based on patch from
Johannes Berg <johannes@sipsolutions.net>.
2005-05-25 Jochen Eisinger <jochen@penguin-breeder.org>
* doc/descriptions/mustek_pp.desc: added scanner
2005-05-23 Julien Blache <jb@jblache.org>
* doc/sane-find-scanner.man, doc/gamma4scanimage.man: spelling
fixes from A Costa.
2005-05-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Konica Minolta Dimage
5400 2. Fixed bus type for Mustek 800 II EP.
* doc/descriptions-external/genesys.desc: Changed status of Medion
MD 6471 to "basic".
2005-05-22 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-options.c:
Disabled 2400 DPI for Epson 2480 due to user report of
broken scanner
2005-05-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx_devices.c
backend/gt68xx_generic.c backend/gt68xx_generic.h
backend/gt68xx_gt6801.c backend/gt68xx_gt6801.h
backend/gt68xx_gt6816.c backend/gt68xx_gt6816.h
backend/gt68xx_high.c backend/gt68xx_high.h backend/gt68xx_low.c
backend/gt68xx_low.h backend/gt68xx_mid.c
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
doc/gt68xx/gt68xx.TODO:
Mustek BearPaw 1200 CU Plus model 0x21b works now. Fixed
firmware and offset settings. Calibration is not completely ok
yet, however. Code cleanup for setup_scan (only one function
for all chipsets). Simplified line mode/pixel mode setting
Updated TODO. Mustek BearPaw 2448 TA Plus is now only
"basic". Too much trouble for "good". Removed option "fast
preview". By default for preview mode 8 bits/pixel are used.
Fixed indentation. Full scan really scans from y=0 on gt6816
scanners now.
* po/sane-backends.bg.po po/sane-backends.cs.po
po/sane-backends.da.po po/sane-backends.de.po
po/sane-backends.es.po po/sane-backends.fi.po
po/sane-backends.fr.po po/sane-backends.it.po
po/sane-backends.nl.po po/sane-backends.no.po
po/sane-backends.pl.po po/sane-backends.pt.po
po/sane-backends.ru.po po/sane-backends.sv.po: Regenerated
translation files. Updated German translation.
2005-05-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/backend-writing.txt: Minor updates and line-wrap fixes.
* doc/descriptions/unsupported.desc: Added Kodak i30 and Minolta
Dual Scan IV. Updated link to Konica Minolta website.
2005-05-15 frank <sane at zago net>
* tools/Makefile.in: remove superfluous libraries for sane-desc
* doc/descriptions/matsushita.desc: changed some scanner status from
good to minimal
* doc/descriptions/unsupported.desc: added a few Panasonic scanners.
2005-05-13 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added Epson Stylus RX620
(04b8/0811). From Mike Talbot.
2005-05-11 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek-pp_misc.c: Applied patch (see bug #301605).
* doc/plustek/Plustek-PARPORT.changes: Update.
* backend/plustek-pp.c: Bumped build number.
2005-05-10 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/sanei_access.c: Added PATH_MAX, in case it's not defined
by any header (i.e. OS/2).
2005-05-07 Mattias Ellert <mattias.ellert@tsl.uu.se>
* README.darwin: updated the section about libusb, since all known
bugs have now been fixed in the libusb CVS.
2005-05-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx_devices.c
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
doc/gt68xx/gt68xx.TODO: Plustek OpticSlim 2400: Fixed list of
resolutions. That fixed the preview. Removed "untested"
warning. Adjusted scan area. Updated gt68xx.TODO. Find firmwares
independent of capitalization (bug #301580).
2005-05-07 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added Microtek ScanMaker 3700
(05da/40cb). From Ian Beckwith.
2005-05-06 Gerard Klaver <gerard at gkall dot hobby dot nl>
* backend/qcam.c -indent -gnu, bugreport 300128 free (devlist) added,
DEBUG output added and some small fixes.
2005-05-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Dell 922.
* backend/mustek.c backend/mustek.h doc/descriptions/mustek.desc
doc/mustek/mustek.CHANGES: Added options to set the time after
which the lamp of the A3 Pro is shut off and to shut it off
immediately.
2005-05-02 Peter Fales <peter@fales-lorenz.net>
* backend/gphoto2.c: Fix core dump when no port is specified in
the gphoto2 config file. (bug #301552)
2005-04-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/sp15c.desc: Added ScanPartner 600C (bug
#301528).
* doc/descriptions/unsupported.desc: Removed several Brother
scanner which are supported by the brother backend now.
* doc/descriptions-external/brother.desc: Fixed link.
2005-04-28 Julien Blache <jb@jblache.org>
* backend/v4l.c: duplicate capability.name in attach() so that
each device is listed with its actual name, not with the name of
the last discovered device. Reported by Andreas Hartmann.
2005-04-28 Mattias Ellert <mattias.ellert@tsl.uu.se>
* frontend/scanimage.c: Added missing braces
2005-04-27 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/plustek.desc: Added UMAX Astranet ia101.
2005-04-26 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added Epson Stylus CX3650
(04b8/080e), from Daniel Sobe.
2005-04-25 Gerhard Jaeger <gerhard@gjaeger.de>
* include/sane/sanei_pp.h, sanei/sanei_pp.c: Added outb_eppdata
functionality (thanks to Anderson Lizardo).
* backend/plustek-pp_procs.h, backend/plustek-pp_io.c,
backend/plustek-pp_misc.c: Fixed compilation problem for kernel
module with gcc-3.4 compiler.
* doc/plustek/Plustek-PARPORT.changes: Update.
* backend/plustek-pp.c: Bumped build number.
2005-04-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/hotplug/libsane.usermap: Fixed Minolta Scan Dual III entry
(bug #301512).
* doc/descriptions/mustek.desc: Added Mustek TwainScan II SP (bug
#301217).
* doc/descriptions-external/viceo.desc: Added Primax Colorado 2200
USB.
* doc/descriptions/unsupported.desc: Added Canon PIXMA MP110.
* AUTHORS: Marked Kazuya Fukuda as active.
2005-04-23 Julien Blache <jb@jblache.org>
* LICENSE: Add an FAQ section.
* tools/hotplug/libsane.usermap: Added Genius ColorPage Vivid3xe
(0458/2017), from Ramiro Aceves through Debian BTS.
2005-04-18 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek-usbhw.c, backend/plustek-usbscan.c: Fixed
problem, that has been reported in conjunction with backtracking
and sensor-speedup option.
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Bumped build number.
2005-04-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc
doc/descriptions-external/genesys.desc: Added and updated
several scanners.
2005-04-15 Gerard Klaver <gerard at gkall dot hobby dot nl>
* sanei/sanei_usb.c More debug info for control and isochronous mode
Detection added for endpoints for configurations, interface and
altsetting numbers > 0
Routine added for changing configuration, interface or altsetting
number
sanei_usb_set_configuration
sanei_usb_claim_interface
sanei_usb_release_interface
sanei_usb_set_altinterface
* include/sane/sanei_usb.h headers and text added for
sanei_usb_set_configuration
sanei_usb_claim_interface
sanei_usb_release_interface
sanei_usb_set_altinterface
* frontend/scanimage.c added -B option buf size
split up printf command to remove warning ISO C89
patch for bugreport 300160, ranges for width and height are wrong
* doc/scanimage.man added text -B option buf size
2005-04-13 Mattias Ellert <mattias.ellert@tsl.uu.se>
* backend/hp-option.c: Add missing SANE_I18N
* po/sane-backends.*.po: Regenerate .po files accordingly
* po/sane-backends.sv.po: Update Swedish translations
2005-04-12 Mattias Ellert <mattias.ellert@tsl.uu.se>
* Various man page fixes: sane-agfafocus.man, sane-apple.man,
sane-artec.man, sane-artec_eplus48u.man, sane-avision.man,
sane-bh.man, sane-canon_pp.man, sane-coolscan.man,
sane-coolscan2.man, sane-dll.man, sane-epson.man, sane-fujitsu.man,
sane-hp.man, sane-leo.man, sane-matsushita.man, sane-microtek2.man,
sane-mustek.man, sane-mustek_pp.man, sane-mustek_usb.man,
sane-nec.man, sane-niash.man, sane-pie.man, sane-plustek.man,
sane-plustek_pp.man, sane-sceptre.man, sane-scsi.man, sane-sharp.man,
sane-sm3600.man, sane-sm3840.man, sane-sp15c.man, sane-teco1.man,
sane-teco2.man, sane-teco3.man, sane-test.man, sane-u12.man,
sane-umax.man, sane-umax1220u.man, sane-umax_pp.man, sane.man,
saned.man
2005-04-11 Gerhard Jaeger <gerhard@gjaeger.de>
* acinclude.m4, configure.in, configure: the locking feature will
now be disabled, when the selected group could not be set.
The configuration script should not fail any longer.
2005-04-10 Julien Blache <jb@jblache.org>
* backend/hp5400_xfer.h, backend/hp5400_sanei.c, backend/hp5400.c:
make non-SANE-standard functions static.
2005-04-10 Jochen Eisinger <jochen@penguin-breeder.org>
* backend/mustek_pp.c, backend/mustek_pp.conf, sanei/sanei_pa4s2.c,
include/sane/sanei_pa4s2.h, doc/sane-mustek_pp.man: added global
option "no_epp" to work around a known bug in the linux parport
code.
2005-04-02 Julien Blache <jb@jblache.org>
* doc/sane.man: typo fix from A Costa.
2005-04-01 Gerhard Jaeger <gerhard@gjaeger.de>
* README: Added some info about the --enable-locking switch.
* doc/descriptions/unsupported.desc
doc/descriptions-external/genesys.desc: Moved some Plustek
devices over to the genesys descriptions.
* tools/hotplug/libsane.usermap: Added some Plustek devices.
* mkinstalldirs: Added -o and -g options for changing the
owner and group of an installed directory.
* acinclude.m4, configure.in, configure: Added --enable-locking
and --with-group to enable device locking via sanei_access-lib
and to specify the group of the locking directory.
* include/sane/config.h.in: ENABLE_LOCKING has been added
by automake/autoconf.
* backend/Makefile.in: Added installation of
$(localstatesanedir)/lock/sane, were the lockfile should go to.
Also added linking of sanei_access to the plustek backend.
* include/Makefile.in: Added sane/sanei_access.h.
* sanei/Makefile.in: Added sanei_access.c.
* include/sane/sanei_access.h sanei/sanei_access.c: Initial checkin.
2005-03-31 Julien Blache <jb@jblache.org>
* doc/scanimage.man: fix typos, patch from A Costa.
2005-03-20 Earle F. Philhower III <earle@ziplabel.com>
* backend/sm3840_scan.c: Big-endian graymode fix
2005-03-17 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/descriptions-external/samsung.desc added
2005-03-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Removed Microtek ScanMaker
4800 (supported by sm3840 now).
2005-03-16 Earle F. Philhower III <earle@ziplabel.com>
* backend/sm3840.c backend/sm3840_scan.c backend/sm3840.conf
backend/Makefile.in doc/descriptions/sm3840.desc
doc/sane-sm3840.man: Added ScanMaker 4800 USB ID and
documentation, fixed PPC endianness problems, fixed
Makefile dependencies for sm3840 driver
2005-03-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc
doc/descriptions-external/genesys.desc: Added and updated
various scanners.
2005-03-04 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/sane-teco2.man: text update
backends/teco2: use of __unused__
2005-03-03 Julien Blache <jb@jblache.org>
* tools/hotplug-ng/libsane.hotplug: add missing quote in the grep line.
2005-03-02 Julien Blache <jb@jblache.org>
* tools/hotplug-ng/libsane.hotplug: allow for several spaces
between fields in the db file.
2005-02-28 Julien Blache <jb@jblache.org>
* tools/hotplug-ng/libsane.hotplug: replace \t by [[:space:]] when
grepping for the device in the db file.
2005-02-21 Julien Blache <jb@jblache.org>
* tools/hotplug-ng: added new hotplug/hotplug-ng hook, with
scripts and documentation.
2005-02-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Removed Genius
ColorPage-Vivid Pro II, now in external backend. Added Visioneer
9000.
* AUTHORS configure configure.in backend/Makefile.in
backend/dll.conf backend/sm3840.c backend/sm3840.conf
backend/sm3840.h backend/sm3840_lib.c backend/sm3840_lib.h
backend/sm3840_params.h backend/sm3840_scan.c doc/Makefile.in
doc/sane-sm3840.man doc/sane.man doc/descriptions/sm3840.desc:
Added sm3840 backend (from "Earle F. Philhower, III"
<earlephilhower@yahoo.com>).
* doc/descriptions-external/sm3840.desc: Removed (backend included
in SANE).
* NEWS: Updated.
2005-02-14 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions-external: Added new external backend geniusvp2.
2005-02-10 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Added CX-3600 and 3650
doc/sane-epson.man, backend/epson.conf: Added information about
GT-6500 (bug #301100)
2005-02-08 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h backend/snapscan.conf
Added IDs for Benq 5250C and 5000S
2005-02-08 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/sanei_pp.c: Cleanup, uses now static array for parport
management instead of dynamically allocated. Fixes at least a
potential memory leak.
2005-02-06 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/unsupported.desc doc/descriptions/snapscan.desc:
Renamed "Benq" to "Benq (Acer)" for better access through the
scanner search engine. Fixes bug #301158
2005-02-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added several scanners. Minor
fixes.
* doc/descriptions-external/sm3840.desc: Added new external
backend sm3840.
* doc/descriptions-external/brother.desc: Updated status.
* po/Makefile.in po/sane-backends.pl.po: Added Polish translation
(from Jerzy Szczudlowski
<jerzy-guest@users.alioth.debian.org>). See bug #301054.
2005-02-04 Gerhard Jaeger <gerhard@gjaeger.de>
* tools/hotplug/libsane.usermap: Added Epson CX6600 based on patch
submitted by Aurelien Jarno <lists@aurel32.net>.
2005-02-03 Ulrich Sigwanz <usigwanz@freesurf.ch>
* backend/niash_xfer.c:
* tools/hotplug/libsane.usermap:
added ID for Silitek-HP-ScanJet-3400c-Clone
2005-01-19 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
* backend/coolscan.c: added initialization of dev->scanning = SANE_FALSE
2005-01-18 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h: Added ID for Benq 5250C
2005-01-16 Karl Heinz Kremer <khk@khk.net>
* backend/epson_usb.c: Added IDs for RX-425 (from bug report #301114)
* doc/descriptsions/epson.desc: Added RX-425
2005-01-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added UMAX Astraslim
6000. Added Trust SCSI Scan 19200 -Excellence Series-. Added
ColorPage-Vivid Pro II.
* tools/hotplug/libsane.usermap: Added Epson Stylus RX425 based on
bug report #301114.
* doc/sane-agfafocus.man doc/sane-artec.man: Fixed some macros
(patch from esr@thyrsus.com).
2005-01-12 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Genius ColorPage-Slim
1200 USB2.
* doc/descriptions-external/genesys.desc: Added Canon Lide 40.
* doc/descriptions-external/brother.desc: Added several scanners
and updated the status of others based on user comments.
2005-01-12 Julien Blache <jb@jblache.org>
* tools/hotplug/libusbscanner: use sysfs to get the device number,
instead of guessing (it ended up being wrong in a number of
cases...). Fix from Ubuntu, transmitted by Martin Pitt.
2005-01-12 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Bumped build number. Copyright Update.
* backend/plustek-usbscan.c backend/plustek-usbshading.c:
Using now PhyDpi.y as selector for the motor MCLK setting.
Copyright Update.
* backend/plustek-usbdevs.c:
Tweaked motor settings for EPSON and CANON1200. Copyright Update.
* backend/plustek-*.[ch]: Copyright Update.
2005-01-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Guillemot scanner.
2005-01-09 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: "flaming hack to get USB scanners working without timeouts
under linux" submitted by "Steve" (in comment to bug #300830)
* doc/descriptions/epson.desc, doc/sane-epson.man:
Added SCSI version of GT-5000 to supported list.
2004-12-29 Julien Blache <jb@jblache.org>
* tools/sane-find-scanner.c: Added a hint about switching the
scanner on and connecting it to the computer before doing
anything.
2004-12-26 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/descriptions-external/hpaio.desc join two lines so html
conversion possible
doc/descriptions-external/stv680.desc added two webcams with
different usb vid and pid
2004-12-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added several scanners.
2004-12-18 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c backend/epson_usb.c: Added USB IDs for
CX-3650 and CX-4600 and updated version number.
2004-12-15 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/descriptions-external/hpaio.desc stv680.desc
Info new external backends
2004-12-01 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.c backend/snapscan-scsi.c backend/snapscan-options.c:
Added quality calibration for Epson 2480 (implemented by Simon Munton)
2004-12-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx_devices.c: Disabled stop_scan command for Mustek
BearPaw 2448 TA Plus.
2004-12-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-gphoto2.man doc/sane-microtek2.man: Fixed minor
glitches based on patch from Eric S. Raymond <esr@thyrsus.com>.
* doc/descriptions/unsupported.desc: Added Benq 320p.
2004-12-04 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added Epson Perfection 4870
Photo, vendor 0x04b8 product 0x0128.
2004-12-01 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.c: Applied fix for allocation of gamma tables
(thanks to Simon Munton)
2004-12-01 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/unsupported.desc: removed Epson Perfection 1270
2004-12-01 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h backend/snapscan.c backend/snapscan-scsi.c
backend/snapscan-options.c doc/descriptions/snapscan.desc:
Added support for Epson Perfection 1270
2004-12-01 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/umax1220u.desc doc/descriptions/unsupported.desc
doc/descriptions-external/genesys.desc: Added several scanners. Moved
UMAX 2100U to umax1220u.desc. Moved Plustek S(T)12 to unsupported.desc.
2004-11-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/brother.desc. Updated comments. 9160 works.
2004-11-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Updated/added several scanners.
2004-11-21 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek-usb.c: Fixed problem, when builing supported
and connected device list.
2004-11-19 Rene Rebe <rene@exactcode.de>
* sanei/sanei_usb.c configure.in: use usb_interrupt_read instead of
usb_bulk_read for sanei_usb_read_int. Fixes bug #300878. Added a
missing DBG output in sanei_usb_read_int. Check for
usb_interrupt_read to make sure, we have at least version 0.1.8.
2004-11-19 Rene Rebe <rene@exactcode.de>
* backend/avison.c doc/descriptions/avision.desc
doc/descriptions/unsupported.desc: just added new IDs including
moving the HP 82xx to the avision backend
2004-11-19 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek.c backend/plustek-usb*: Major update, see
doc/plustek/Plustek-USB.changes. Esp. improved support for multiple
devices and autodetection.
* doc/plustek/Plustek-USB.changes: Update.
* doc/descriptions/plustek.desc: Updated release number.
2004-04-15 St�hane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: non i386 linux compilation fix,
1220P gray levels scan hang fix, 1220P color calibration tuning.
2004-11-14 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* snapscan-sources.c: Applied patch by Julien Blache to change
ch_past_init from SANE_Int to SANE_Bool
2004-11-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx_devices.c
backend/gt68xx_gt6801.c backend/gt68xx_gt6816.c
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Fixed test
to move home sensor at the start of scan. Fixed gray mode
linemode test. That stopped e.g. the Plustek OpticPro U 16 B from
working in gray mode.
2004-11-13 Frank Zago <fzago at austin dot rr dot com>
* include/sane/sanei_backend.h: Added compiler attribute __unused__
for unused variables/functions.
* backend/leo.c backend/teco3.c backend/matsushita.c
backend/sceptre.c backend/teco1.c: use __unused__
* sanei/sanei_wire.c sanei/sanei_pa4s2.c sanei/sanei_scsi.c:
fixes for 64 bits platforms.
* backend/sp15c-scsi.h backend/sp15c.h backend/dc210.c backend/dc210.h:
fixes some warnings.
2004-11-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/v4l.c: 64 bit fix from Frank Zago <fzago at austin dot
rr dot com>.
2004-11-13 Julien Blache <jb@jblache.org>
* tools/hotplug/libsane.usermap: Added Epson Stylus Photo RX500,
Epson Stylus Photo RX600 and Minolta Scan Dual II.
2004-11-10 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* snapscan-sources.c: First implementation of deinterlacer for epson
scanners at high resolutions (thanks to Brad Johnson)
2004-11-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Updated version. Enabled compilation
warnings.
* doc/releases.txt: Updated according to current practice.
Older entries can be found in ChangeLog-1.0.15.
Generated by dwww version 1.15 on Sat May 18 14:13:50 CEST 2024.