****** Release of sane-backends 1.0.13. End of code freeze ******
2003-11-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: New version: 1.0.13.
2003-11-20 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/snapscan.desc: Added model "SnapScan"
(Bugtrack #300286)
2003-11-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/sane-backends.sv.po: Updated Swedish translation (from
Mattias Ellert <mattias.ellert@tsl.uu.se>).
2003-11-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in acinclude.m4 aclocal.m4: Changed check for
linux/videodev.h. If that file is not compilable, we don't build
the v4l backend. That's to avoid compilation errors if videov.h
from Linux kernel 2.6.* is used. Include all the headers we also
include in backend/v4l.c to make sure we find all problems.
* backend/v4l.c: Try to not include linux/videodev2.h to avoid
compilation errors.
-- snapshot 1.0.13-pre3
---- CODE FREEZE FOR SANE 1.0.13 ---
2003-11-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Updated.
* configure configure.in: Disabled warnings for release.
2003-11-15 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Brother DCP 8020 and
UMAX Astra 3600.
2003-11-14 Eddy De Greef <eddy_de_greef at tiscali dot be>
* doc/sane-mustek_pp.man: added the new libieee1284 style parport
names.
2003-11-14 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek.c backend/plustek-usb.cal backend/plustek-usbshading.c
backend/plustek-usbhw.c: Endianness fixes.
2003-11-13 Eddy De Greef <eddy_de_greef at tiscali dot be>
* backend/mustek_pp_cis.c: accept old style parport names to
ensure backward compatibility with existing mustek_pp.conf files.
2003-11-13 Peter Fales <peter@fales-lorenz.net>
* backend/gphoto2.h: Line beginning with "static static" was breaking
compiles on some platforms.
2003-11-10 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/Makefile.in: Linking pie backend now against sanei_thread lib.
* backend/pie.c: Switched backend over to sanei_thread usage, to make it
also work with OS/2.
2003-11-08 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-options.c backend/snapscan.c
Disabled quality calibration for Epson Perfection 1670 since it does
not work reliably yet
2003-11-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/lhii.desc: Added (back) the links to
the external lhii backend that supports old handscanners.
-- snapshot 1.0.13-pre2
2003-11-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Removed Epson Perfection
1670. It's now supported by the snapscan backend.
2003-11-08 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-options.c backend/snapscan-usb.c
Fix TPO range for Epson 1670, fix compiler warnings on gcc 3.3
2003-11-08 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-scsi.c backend/snapscan.c doc/descriptions/snapscan.desc:
Final bugfixes for Epson 1670
2003-11-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.openbsd: Added info about setting permissions (Bug #300311).
* doc/descriptions/unsupported.desc: Added Genius and Lexmark scanners.
2003-11-07 Oliver Schirrmeister <oschirr@abm.de>
* backend/fujitsu.c: Bugfix. If a scanner returned a color image
in format rr...r gg.g bb...b the reader process crashed.
* backend/fujitsu.[ch] Bugfix. The option gamma was enabled for
the fi-4120. The result was an 'invalid field in parm list'-error.
* doc/descriptions/fujitsu.desc: added model "fi-4530C"
2003-11-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Microtek and Visioneer
scanners.
2003-11-04 m. allan noah <anoah at pfeiffer dot edu>
* doc/descriptions/fujitsu.desc: added model "fi-4110EOX2"
2003-11-04 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/Makefile.in: Linking coolscan now against sanei_thread lib.
* backend/coolscan.c backend/coolscan.h: Switched backend over to
sanei_thread usage, to make it work at least with OS/2.
* backend/plustek-pp_misc.c backend/plustek-pp_hwdefs.h: Fixed bug
in parport setup routine.
* sanei/sanei_pp.c: Fixed problem in sanei_pp_setmode().
Fixed parport mode setting in direct mode.
2003-11-02 Julien Blache <jb@jblache.org>
* frontend/saned.c: fixed endianness issues in
check_v{4,6}_in_range(), also fixed portability issues to other
UNIX platforms due to different representations of IPv6 addresses.
2003-11-02 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/unsupported.desc: Added Plustek OpticSlim 2400.
* include/sanei/sanei_thread.h: Removed OS/2 porting section.
* sanei/sanei_pp.c include/sanei/sanei_pp.h:
Fixed udelay stuff, documentation update.
2003-11-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/Makefile.in: sanei_pp must be linked if we preload
backends.
---- FEATURE FREEZE FOR SANE 1.0.13 ---
-- snapshot 1.0.13-pre1
2003-11-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added PIE Powerslide 3600.
* NEWS: Updated for 1.0.13.
2003-10-30 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/lib/sanei_pp.c: Made sanei_pp_set_datadir work in no ieee1284 mode.
Fixed a minor bug in delay calculation.
* include/sanei/sanei_pp.h: Added some control-port definitions.
* backend/plustek_pp.c backend/plustek-pp*:
Made PS/2 bidirectional mode work.
* doc/plustek/PLUSTEK-PARPORT.txt: Update.
2003-10-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/Makefile.in backend/mustek.c backend/mustek.h
doc/descriptions/mustek.desc doc/mustek/mustek.CHANGES:
Added support for sanei_thread. Removed OS/2 specific code.
Added more debug messages.
* doc/saned.man: Added more info about firewall trouble.
2003-10-29 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/lib/sanei_pp.c include/sanei/sanei_pp.h:
Added functions sanei_pp_set_datadir() and sanei_pp_uses_directio().
Added some documentation.
* doc/plustek/PLUSTEK-PARPORT.txt doc/plustek/PLUSTEK-PARPORT-TODO.txt
doc/plustek/PLUSTEK-USB-TODO.txt: Updates.
* backend/plustek_pp.c backend/plustek-pp_*: Made usage of the new
sanei_pp functions, made EPP modes work with libieee1284. Also some
cleanup work.
2003-10-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-scsi.man: Added hint for setting device permissions for
/dev/xpt0 for FreeBSD users.
* AUTHORS backend/artec.c backend/artec.h doc/sane-artec.man:
Fixed Chris Pinkham's email address.
* doc/descriptions/unsupported.desc: Added Microtek ScanMaker 4900.
2003-10-28 Rene Rebe <rene@rocklinux.org>
* backend/avision.h backend/avision.c doc/descriptions/avision.desc
backend/avision.conf AUTHORS: merge of the current Subversion
revision of SANE/Avision. The fixes include: endianness fixes,
calibration code, ADF detection, correct lamp warmup, gamma table
for new ASICs, some workarounds for ASIC variations and the
conversion to use OPT_SOURCE instead of separate OPT_ADF and
OPT_TRANS. Also fixed Bugs #300288 and #300196 and removed
the conflicting Option_Valu now present in sanei_backend.h
* doc/sane-avision.man: made requested clarifications (Bugs #300290,
#300291)
2003-10-28 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/sane-plustek.man backend/plustek.conf backend/plustek.c:
Changed configuration file back to remain compatible with the old format.
2003-10-27 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Replaced all DBG(0, statements with
DBG(1, ... to avoid logging messages the user should
not see anyways.
2003-10-27 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/lib/sanei_pp.c: Fixed OS/2 compilation problems.
* doc/descriptions/plustek_pp.desc:
Updated status of Primax Compact 4800 Direct 30bit.
2003-10-26 Gerhard Jaeger <gerhard@gjaeger.de>
* configure.in configure include/sanei/config.in.h:
Added check for limits.h - HAVE_LIMITS_H.
* sanei/lib/sanei_pp.c include /sanei/sanei_pp.h:
Added sanei_pp_init() and sanei_pp_udelay().
* backend/plustek_pp.c backend/plustek-pp_misc.c backend/plustek-pp_scan.h:
Fixed compiler warnings, using now sanei_pp_udelay() and
made the backend work with libieee1284.
---- BACKEND FREEZE FOR SANE 1.0.13 ---
2003-10-24 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.c, backend/hp-handle.c, backend/Makefile.in:
second check-in: use new sanei_thread-interface for hp-backend
2003-10-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/hp_rts88xx.desc: Added description
file of new hp_rts88xx backend for HP 44x0 scanners (from
Johannes Hub <johanneshub@foni.net>).
* doc/descriptions/unsupported.desc: Added Minolta DiMAGE Scan
Elite 5400. Removed HP 44x0 (now supported by hp_rts88xx
backend). Updated Epson Perfection 3170. Updated Plustek
S24/ST24.
* doc/descriptions/avision.desc doc/descriptions/canon.desc
doc/descriptions/sharp.desc: Updated to new status values.
Bugs: #300146, #300147, #300154.
* include/sane/sanei_thread.h: Updated doxygen documentation
for new sanei_thread interface.
2003-10-23 Frank Zago <fzago at austin dot rr dot com>
* README.windows: added note about libusb port for cygwin.
2003-10-23 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek.c backend/plustek-usb.c:
fixed bug, that causes CanoScan devices to use the wrong calibration
functions, sanei_usb_get_vendor_product() fails.
* sanei/sanei_pp.c:
Added sanei_pp_getmode, fixed conditional compilation stuff.
* include/sanei/sanei_pp.h:
Added sanei_pp_getmode and SANEI_PP_MODE definitions.
* backend/plustek_pp.c backend/plustek-pp.h backend/plustek-pp_misc.c:
Added parport-mode detection.
2003-10-22 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.c, backend/hp-handle.c, backend/Makefile.in:
use new sanei_thread-interface for hp-backend
2003-10-22 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/descriptions/teco2.desc backend/teco2.conf doc/sane-teco2.man:
Mustek ScanMagic 4830S added.
* doc/sane-teco2.man: maintainer Gerard Klaver added, text update.
* doc/teco/teco2.txt: data VM3564 Relisys AVEC II S3 added.
2003-10-22 Julien Blache <jb@jblache.org>
* frontend/saned.c: replaced in_addr_t mask; by u_int32_t mask; in
check_v4_in_range(). in_addr_t doesn't seem to exist on OS/2, and
it's nothing more than an unsigned 32 bits integer.
2003-10-22 Gerhard Jaeger <gerhard@gjaeger.de>
* configure configure.in include/sane/config.in.h: added checks for iopl.
* sanei/sanei_pp.c sanei/Makefile.in
include/sanei/sanei_pp.h include/sanei/Makefile.in: added generic
parallel-port function lib.
* backend/plustek-pp* backend/plustek_pp.c: major update, sanei_pp
integration, compilation fixes.
* backend/plustek.c: fixed, the "generic disable" switch
2003-10-21 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h backend/snapscan.c backend/snapscan-option.c
backend/snapscan-scsi.c backend/snapscan.conf: Bugfixes,
hopefully better support for Epson 1670.
2003-10-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/epkowa.desc: Added Perfection 1670 as
"unsupported". Changes status of 1260 PHOTO to :basic because of
broken TPU support. Fixed missing quotation mark in Perfection
1200S entry.
* AUTHORS: Oliver Schirrmeister has a CVS account now.
* doc/sane-mustek_usb.man: Added workaround for hardware bug.
2003-10-21 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/sane-umax_pp.man: added help for new configuration option
* tools/umax_pp.c: uppded version number
2003-10-20 Frank Zago <fzago at austin dot rr dot com>
* README.aix doc/sane-leo.man doc/sane-matsushita.man
doc/sane-sceptre.man doc/sane-teco1.man doc/sane-teco2.man
doc/sane-teco3.man doc/descriptions/leo.desc
doc/descriptions/matsushita.desc doc/descriptions/sceptre.desc
doc/descriptions/teco1.desc doc/descriptions/teco2.desc
doc/descriptions/teco3.desc doc/descriptions-external/hp4200.desc:
fixed urls.
2003-10-19 m. allan noah <anoah at pfeiffer dot edu>
* backend/fujitsu.c: reverse previous patch. Dont blindly trust
code from the backend maintainer :)
2003-10-19 Julien Blache <jb@jblache.org>
* frontend/saned.c: added subnet support to saned ; added
check_v4_in_range and check_v6_in_range functions.
* backend/saned.conf: updated the config file.
* doc/saned.man: updated the manpage for saned.
2003-10-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added HP ScanJet 3670.
* doc/descriptions-external/epkowa.desc: Added description file
for the external Epson Kowa backend.
2003-10-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Reflecta iScan
1800. Updated information for Epson Perfection 1670.
* README.linux: Added information about compilation problems when
Linux 2.6 is installed.
* tools/sane-desc.c: In error and warning messages print the name
of the description file. Print warning if the status is not set
for a device.
* backend/test.c: Reindented.
* AUTHORS: Nathan Ruthman has CVS access now.
2003-10-17 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Fixed bug #30149 (added :status information for all scanners)
2003-10-17 Gerhard Jaeger <gerhard@gjaeger.de>
* acinclude.m4 aclocal.m4 configure: Added -D_REENTRANT to compiler
flags, when using pthread support.
* sanei/sanei_thread.c: Added SIGPIPE handling,
when compiled for pthread support.
* backend/test.c: Removed blocking SIGPIPE, as this is now handled
in sanei_thread library.
* backend/plustek.h backend/plustek.c backend/plustek-usbhw.c:
Added checks for intervaltimer, to make it compile on OS/2.
2003-10-16 m. allan noah <anoah at pfeiffer dot edu>
* backend/fujitsu.c: memset the device struct and the scsi buff
when a new device is attached. Submitted by
Chris Chesney <cchesney at go-integral dot com>.
Initialized a couple vars in the 3091 init routines.
2003-10-15 Henning Meier-Geinitz <henning@meier-geinitz.de>
* AUTHORS: Marked maintainers that have CVS access with a
(*). Added m. allan noah to fujitsu backend. Added Julien Blache
and Petter Reinholdtsen to "Miscellaneous coding". Removed
Petter Reinholdtsen from "CVS repository maintainer".
* doc/sane-usb.man: sane-find-scanner is in section 1, not 5.
2003-10-15 Gerhard Jaeger <gerhard@gjaeger.de>
* include/sanei/config.h.in configure.in configure:
Added test for setitimer.
2003-10-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Pentax, Sicos, Syscan,
and UMAX scanners.
2003-10-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx_low.c: Fixed compilation bug when debugging is
disabled.
* backend/test.c doc/descriptions/test.desc: Fixed cancelling when
threads are used. Only SIGPIPE is blocked now. Sleep indefinetly
after the reader_process has finished. Minor fixes of debug
messages.
2003-10-13 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/sanei_thread.c include/sane/sanei_thread.h: Fixed OS/2 compilation
* sanei/sanei_lm983x.c include/sane/sanei_lm983x.h: Copyright update
2003-10-12 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/sanei_thread.[ch]: Improved OS/2 support
* backend/test.c: removed OS/2 section
2003-10-12 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Memorex, TCE and Optrox
scanners.
2003-10-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Canon DR-2080C. Updated
some links.
* backend/mustek_pp_ccd.conf doc/sane-mustek_pp_ccd.man: Explained
that libieee1284 device names like "parport0" can also be used.
2003-10-10 Gerhard Jaeger <gerhard@gjaeger.de>
* sanei/sanei_thread.c: Fixed some compilation errors on Darwin and OS/2
Fixed segfault condition in sanei_thread_waitpid
2003-10-09 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.c backend/hp-option.c backend/hp-scl.c:
Bug #300241: fix inverse image on 3c/4c/6100C at 10 bit depth
Redo when TEST UNIT READY failed
Redo when read returns with 0 bytes (non-SCSI only)
* doc/sane-hp.man: Add environment SANE_HP_RDREDO, SANE_HOME_HP
2003-10-09 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c backend/umax_pp_low.h backend/umax_pp.h
backend/umax_pp_mid.c backend/umax_pp_low.c backend/umax_pp_mid.h
backend/umax_pp.conf: added automatic parallel port detection,
and special keyword in configuration file to use it.
2003-10-08 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/Makefile.in : linking plustek_pp- and test-backend against
sanei_thread
* backend/test.[ch]: added sanei_thread support
* backend/test-picture.ch: fixed compiler warnings
* backend/plustek.[ch] backend/plustek_pp.c backend/plustek-pp.h:
changes due to the sanei_thread-lib work
* sanei/sanei_thread.c include/sane/sanei_thread.h: improved
support of pthreads, changed behaviour of sanei_thread_kill(),
added functions sanei_thread_sendsig() and sanei_thread_get_status()
changed behaviour of sanei_thread_waitpid(), changed parameters
of sanei_thread_begin()
2003-10-08 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/canon630u.c: Workaround for bug in canon630u backend:
The backend assumes that the id it gets back from sanei_usb_open
is a file descriptor. It isn't. So sane_get_select_fd returns
just a random number. That breaks at least saned, other
frontends may not work either. This is a workaround for bug
#300257.
2003-10-07 m. allan noah <anoah at pfeiffer dot edu>
* backend/fujitsu.c: removed ~25 '_' from option names (#300139)
* backend/fujitsu.conf: added lines for known usb scanners
2003-10-07 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h backend/snapscan-scsi.c
Updates for Epson Perfection 1670
2003-10-07 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h backend/snapscan.c backend/snapscan-option.c
Initial support for Epson Perfection 1670, minor bugfix
(#300247)
2003-10-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* acinclude.m4 aclocal.m4 configure.in configure
include/sane/config.h.in sanei/sanei_thread.c: More verbose help
messages for --enable-fork-process. Print message about pthread
support after all the tests. If libpthread isn't available, try if
libc supports pthreead_*. Use macro USE_PTHREAD to check if
threads are used in the code.
* backend/Makefile.in: Added sanei_pthread.lo to list of object
files needed for preloading.
2003-10-07 Gerhard Jaeger <gerhard@gjaeger.de>
* aclocal.m4 acinlcude.m4 configure configure.in: modified checks for
pthread support, added switch --enable-fork-process which toggles
between the usage of fork and pthread, set the default behaviour to
pthread usage on Darwin
* include/sane/config.h: added the HAVE_LIBPTHRAD stuff
* sanei/sanei_thread.c include/sane/sanei_thread.h: fixed compilation issue
on OS/2, added support for fork too, so that we can use sanei_thread
functions in any case.
* backend/plustek.[ch]: changes due to the sanei_thread-lib work
2003-10-06 m. allan noah <anoah at pfeiffer dot edu>
* backend/fujitsu.[ch]: Added support for color modes of fi-4x20C and
fi-4340C, maybe others as well.
2003-10-06 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.c, backend/hp-option.h: Bug #300248 fixed
(correct "Negatives" in option description to "Negative")
2003-10-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/Makefile.in: Remove doxygen-sanei.conf in clean target.
* sanei/sanei_pa4s2.c: Made some internal functions static.
2003-10-06 Thomas Soumarmon <thomas.soumarmon@cogitae.net>
* backend/hp5400_*: fixed bug #300252 : added static to all non
SANE specific functions + changed #include <sane/..> into
#include "../include/sane/..." as mentioned in the
backend-writing.txt file
2003-10-05 Gerhard Jaeger <gerhard@gjaeger.de>
* aclocal.m4 configure configure.in: added checks for pthread.h and
added linker option -lpthread if pthread.h is found
* include/sane/config.in.h: added HAVE_PTHREAD_H
* sanei/sanei_thread.c include/sane/sanei_thread.h: added pthread_
functions to library, so every backend is able to use either fork or
pthread for its reader-process - see plustek backend for example
* backend/plustek.h backend/plustek.c: added sanei_thread stuff to support
threading on MacOS X
* backend/plustek_pp*: some cleanup
2003-10-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/microtek2.h backend/test.c include/sane/saneopts.h:
Fixed some missing or duplicated spaces in option descriptions.
* backend/canon630u.c: Option names shouldn't be translated.
* backend/mustek.c: Use the same title for brightness as in other
backends.
* po/sane-backends.de.po: Fixed minor bugs.
* po/sane-backends.sv.po: Updated (from Mattias Ellert
<mattias.ellert@tsl.uu.se>).
* po/sane-backends.bg.po po/sane-backends.cs.po
po/sane-backends.es.po po/sane-backends.fr.po
po/sane-backends.it.po po/sane-backends.nl.po
po/sane-backends.no.po po/sane-backends.pt.po
po/sane-backends.ru.po: Regenerated.
* doc/descriptions/unsupported.desc: Added Epson Perfection 3170,
Packard Bell Diamond 1200, and Visioneer PaperPort
3100b. Updated Epson Perfection 1670.
2003-10-04 Karl Heinz Kremer <khk@khk.net>
* backend/epson.[ch]: Fixed bug 300246 - Use SANE_TITLE_SCAN_SPEED
(and DESC and NAME) from saneopts.h instead of my own strings.
Fixed typo in gamma correction description.
Start two descriptions with a capital character.
2003-10-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* AUTHORS configure configure.in backend/Makefile.in backend/dll.conf
backend/mustek_pp_ccd.c backend/mustek_pp_ccd.conf backend/mustek_pp_ccd.h
doc/Makefile.in doc/sane.man doc/sane-mustek_pp_ccd.man
doc/descriptions/mustek_pp_ccd.desc: Added back old mustek_pp
backend. That backend supports Mustek CCD scanners. The backend
was renamed to mustek_pp_ccd to avoid conflicts with the new
mustek_pp backend for CIS scanners. The code was taken from
sane-backends 1.0.9. This is only a temporary solution. The goal
is to incooperate CCD and CIS support into mustek_pp.
* doc/sane-mustek_pp.man doc/descriptions/mustek_pp.desc: Added
links to the mustek_pp_ccd backend. Removed scanners supported by
mustek_pp_ccd.
2003-10-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Microtek ScanMaker
5900.
* doc/descriptions/umax1220u.desc: Converted to new
format (bug #300155). Commented out unsupported UMAX Astra 2200U
to avoid confusion.
* doc/Makefile.in: Cleanup. Removed install target for
mostang.com.
* doc/descriptions/microtek2.desc: Converted to new
format (bug #300153). Commented out ScanMaker 9600XL (was
mentioned twice?).
* doc/descriptions/hpsj5s.desc: Converted to new format (bug
#300151). Added comment about only gray mode.
* doc/descriptions/fujitsu.desc: Converted to new format (bug
#300150).
* doc/descriptions/canon630u.desc: Converted to new format (bug
#300148).
2003-10-03 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Changed "status" information
2003-10-02 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek_pp* backend/plustek-usb*: fixed some OS/2 compiling issues
* doc/plustek: fixed module compilation stuff and increase version number
2003-10-02 Peter Fales <peter@fales-lorenz.net>
* backend/gphoto2.c backend/gphoto2.h: Try to handle the case where
the camera has a corrupt file that can't be decoded as a JPEG
image.
2003-10-01 Eddy De Greef <eddy_de_greef at tiscali dot be>
* doc/sane-mustek_pp.man, doc/descriptions/mustek_pp.desc:
Added Mustek 96 CP to list of supported scanners.
2003-09-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Fixed links to messages in
the mailing list archive.
* configure configure.in doc/Makefile.in doc/doxygen-sanei.conf
doc/doxygen-sanei.conf.in: Automatically update the version
number of SANE in the doxygen documentation.
* doc/backend-writing.txt doc/sane.man: Updated links to sanei
documentation.
* doc/.cvsignore include/sane/sanei.h include/sane/sanei_scsi.h:
Minor fixes for sanei documentation.
* backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c
backend/gt68xx_high.c doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES: Added detection of Genius Vivid 4x.
It won't work out-of-the-box, however. CCD coarse calib
shouldn't run into an endless loop anymore. Plustek 1248U
is much faster now.
2003-09-30 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/unsupported.desc: removed OpticSlim entry
* doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES
doc/sane-gt68xx.man backend/gt68xx.conf: added Plustek OpticSlim entry
* backend/gt68xx_devices.c: added settings for Plustek OpticSlim 1200
2003-09-29 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/sane-plustek.man: minor update
* backend/plustek.c: changed version number, cleanup
* backend/plustek-usb*.c: cleanup
* backend/plustek-pp.*: cleanup
* backend/plustek-share.h: removed, no longer needed
* backend/Makefile.in: removed reference to plustek-share.h
2003-09-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Enhans, Genius and UMAX
scanners.
* backend/test.c doc/descriptions/test.desc: Some options had
wrong constraints or didn't match their descriptions (bug
#300235).
2003-09-25 Frank Zago <fzago at austin dot rr dot com>
* README.windows: updated status of xscanimage and XSane.
2003-09-25 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/Makefile.in: Added plustek_pp.c.
* po/sane-backends.nl.po: Updated Dutch translation (from Martin
Kho <mkho@xs4all.nl>).
* po/sane-backends.bg.po po/sane-backends.cs.po po/sane-backends.de.po
po/sane-backends.es.po po/sane-backends.fr.po po/sane-backends.it.po
po/sane-backends.no.po po/sane-backends.pt.po po/sane-backends.ru.po
po/sane-backends.sv.po: Regenerated.
* doc/Makefile.in: Fixed link to image in HTML manpages.
2003-09-24 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backends/snapscan.c: check second argument of sanei_config_get_string
(Bug #300198)
2003-09-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Changed links to point to
sane-project.org.
* TODO: Removed. Please use the bug tracking system at
http://www.sane-project.org/bugs.html instead.
* README README:os2 configure configure.in: Updated contact
information (website, mailing lists, bug tracker). Minor fixes.
* backend/mustek.c: Fixed sane-devel address.
* doc/backend-writing.txt doc/releases.txt: Updated contact
information. Spelling fixes. Minor updates.
* doc/sane.man: Updated contact information. Removed contributing
section (now on homepage). Spelling fixes, general updates.
* sane-abaton.man sane-agfafocus.man sane-apple.man sane-bh.man
sane-dc210.man sane-dc240.man sane-dc25.man sane-gphoto2.man
sane-hp.man sane-microtek2.man sane-microtek.man
sane-mustek.man sane-mustek_pp.man sane-pint.man
sane-st400.man sane-usb.man sane-v4l.man: Updated links to
sane-devel and SANE homepage.
* sane.tex: Changed homepage and sane-devel-request address.
* doc/Makefile.in: Added README.windows.
* doc/canon/canon.install2700F.txt: Updated links.
* include/sane/sanei.h include/sane/sanei_usb.h: Updated links.
* tools/sane-desc.c: Changed links to sane-project.org. Mentioned bug
tracker. Added contact link. Removed link to special USB and
Parport lists (now on static web pages).
* tools/sane-config.in: Updated links.
2003-09-24 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/sane.man, AUTHORS: added plustek_pp information
* doc/backend-writing.txt: Updated CHECKLIST information
* doc/sane-plustek.man: removed parport sections
* doc/sane-plustek_pp.man: removed usb sections
* backend/plustek.c: changed version number
* backend/plustek-usb*.c: minor fixes, esp. CanoScan LiDE30 gray/color bug
* backend/plustek-pp.*: changed file headers and copyright info
applied some minor fixes
* doc/unsupported.desc: Added Plustek OpticPro S28 and S48
* Makefile.in doc/Makefile.in:
removed TODO, as this file does no longer exist
* doc/plustek/*: changed links to www.sane-project.org (Bug #300215)
2003-09-23 Frank Zago <fzago at austin dot rr dot com>
* Makefile.in NEWS configure configure.in backend/Makefile.in
backend/dll.c include/sane/config.h.in sanei/sanei_scsi.c
tools/sane-find-scanner.c: cygwin port.
2003-09-23 Gerhard Jaeger <gerhard@gjaeger.de>
* configure.in: added new backend plustek_pp
* doc/descriptions/plustek_pp.desc : added
* doc/plustek/*: added/updated various doc-files
* doc/sane-plustek_pp.man doc/Makefile.in : added new man page
* backend/dll.conf : added plustek_pp
* backend/Makefile.in : added plustek_pp files, updated plustek files
* backend/plustek-devs.c backend/pustek-pp.c : removed
* backend/plustek-usbcalfile.c backend/plustek-usbcal.c
backend/plustek-usbdevs.c: new files for the plustek usb backend
* backend/plustek_pp.c backend/plustek_pp.conf
* backend/plustek-pp.h backend/plustek-pp_dac.c backend/plustek-pp_dbg.h
backend/plustek-pp_detect.c backend/plustek-pp_genericio.c
backend/plustek-pp_hwdefs.h backend/plustek-pp_image.c
backend/plustek-pp_io.c backend/plustek-pp_map.c backend/plustek-pp_misc.c
backend/plustek-pp_models.c backend/plustek-pp_motor.c
backend/plustek-pp_p12.c backend/plustek-pp_p12ccd.c
backend/plustek-pp_p48xx.c backend/plustek-pp_p9636.c
backend/plustek-pp_procfs.c backend/plustek-pp_procs.h
backend/plustek-pp_ptdrv.c backend/plustek-pp_scale.c
backend/plustek-pp_scan.h backend/plustek-pp_scandata.h
backend/plustek-pp_sysdep.h backend/plustek-pp_tpa.c
backend/plustek-pp_types.h backend/plustek-pp_wrapper.c :
new added, contains all the code necessary for controlling various Plustek
ASIC 9600x/9800x based parallelport scanner
2003-09-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/sane-desc.c: PATH_MAX is too small for long comments on
win32. Actually return 0 if there is no second quotation mark.
Patch from Frank Zago <fzago at austin dot rr dot com>. Check
for !word everywhere to avoid segfaults when a quotation mark is
missing.
* sanei/sanei_config.c: Actually return 0 if there is no second
quotation mark.
* backend/ma1509.c backend/mustek.c backend/mustek_usb.c
backend/test.c doc/descriptions/ma1509.desc
doc/descriptions/mustek.desc doc/descriptions/mustek_usb.desc
doc/descriptions/test.desc doc/mustek/mustek.CHANGES
doc/mustek_usb/mustek_usb.CHANGES: Check if
sanei_config_get_string fails because of a single quotation mark
in the configuration file. Update version numbers.
2003-09-19 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/microtek.desc: Used new :status scheme. Added
Vobis Highscreen Realscan and Genius Colorpage-SP2.
* doc/descriptions/unsupported.desc: Added HP, Microtek and UMAX
scanners.
2003-09-18 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/sane-umax_pp.c: fix default port address handling
(patch from Malcolm Parsons <malcolm.parsons@virgin.net>)
* configure.in configure include/sane/config.h.in: added detection of
machine/cpufunc.h and i386_set_ioperm() for FreeBSD support.
2003-09-16 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/sane-umax_pp_low.man: updated man page
2003-09-15 Simon Munton <simon@munton.demon.co.uk>
* doc/sane-pie.man doc/descriptions/pie.desc: Updated status of ScanAce
III to 'good' based on feedback from Brian Wood.
2003-09-14 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: put Henning's #include change back in.
2003-09-14 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: reworked inb/out functions. The backend now
works on FreeBSD.
2003-09-12 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Increment only once in loop to find USB scanners,
fix rounding error when calculating number of lines to scan.
2003-09-12 Eddy De Greef <eddy_de_greef at tiscali dot be>
* AUTHORS, backend/mustek_pp_cis.c, backend/mustek_pp_cis.h,
doc/sane-mustek_pp.man: Updated e-mail address.
2003-09-12 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/.cvsignore sanei/.cvsignore: Added .libs. Sorted.
* doc/descriptions/unsupported.desc: Updated HP ScanJet 2300c
and 2400c.
* backend/abaton.c backend/abaton.h backend/agfafocus.c
backend/agfafocus.h backend/apple.c backend/apple.h
backend/artec.h backend/artec_eplus48u.h backend/as6e.c
backend/as6e.h backend/avision.h backend/bh.c backend/bh.h
backend/canon.c backend/canon.h backend/coolscan.h backend/dmc.c
backend/dmc.h backend/epson.c backend/epson.h backend/fujitsu.h
backend/gt68xx.c backend/gt68xx_high.h backend/ibm.c backend/ibm.h
backend/leo.h backend/ma1509.c backend/ma1509.h
backend/matsushita.h backend/microtek.c backend/microtek.h
backend/microtek2.c backend/microtek2.h backend/mustek.c
backend/mustek.h backend/mustek_pp.c backend/mustek_pp.h
backend/mustek_usb.c backend/mustek_usb_high.h backend/nec.c
backend/nec.h backend/pie.c backend/pint.c backend/pint.h
backend/plustek.h backend/qcam.c backend/qcam.h backend/ricoh.c
backend/ricoh.h backend/sceptre.h backend/sharp.c backend/sharp.h
backend/sm3600.c backend/sm3600.h backend/snapscan.c
backend/snapscan.h backend/tamarack.c backend/tamarack.h
backend/teco1.h backend/teco2.h backend/teco3.h backend/test.h
backend/umax.c backend/umax.h backend/umax_pp.c backend/umax_pp.h
backend/v4l.c backend/v4l.h include/sane/sanei_backend.h:
Moved union Option_Value from backend header files to
sanei_backend.h. No need to copy it over and over again.
Changed header inclusion order in backend files to include
backend.h after sanei_backend.h. Based on a patch from stef
<stef-listes@wanadoo.fr>.
2003-09-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Canon Lide 80, updated
Canon and HP information.
2003-08-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c doc/sane-gt68xx.man
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES:
Added Mustek ScanMagic 1200 UB Plus. Minor bugfix.
* doc/descriptions/unsupported.desc: Added UMAX Astra 4450 and
Mustek BearPaw 2448 TA Pro. Updated Canon CanoScan 5000F.
2003-08-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/Makefile.in po/sane-backends.it.po: Added Italien translation
(from Luca Clemente <luca.clem@zerobase.it>).
2003-08-22 Karl Heinz Kremer <khk@khk.net>
* backend/epson*.[ch]: Fixed compile problem on Linux
Code cleanup to get rid of compiler warnings
2003-08-21 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Removed '//' comments - again ...
Added EPSON KOWA copyright
2003-08-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.darwin sanei/sanei_scsi.c: Added support for the
MacOS X IOKit SCSI Architecture Model API. Added support for
Firewire scanners. Patch from Guy Brooker <guy_brooker@mac.com>.
* TODO: Added entries for mustek patch, sanei_usb devfs trouble,
and moving of Option_Value. Updated .desc file section.
* doc/descriptions/unsupported.desc: Updated sections about
Canon, Epson, HP, Medion, Microtek, Mustek, and Xerox scanners.
2003-07-22 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.c backend/snapscan.h backend/snapscan-scsi.c
backend/snapscan-options.c backend/snapscan.conf: Backend version
1.4.27 (ID cleanup, fix for firmware download of Acer 310/320,
new USB ID for Acer 310)
2003-08-17 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c backend/umax_pp.h: revert change for UTA
2003-08-15 Karl Heinz Kremer <khk@khk.net>
* backend/epson.[ch]: Added support for GT-30000, with support for the
ADF in simplex mode (used some code from the EPSON Kowa IScan version
of the backend)
* backend/epson_scsi.c: Use sanei_scsi_cmd2() to send commands to fix a problem
with SBP-2 under FreeBSD
2003-08-15 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c backend/umax_pp.h: added a check of values passed
in gamma table. Fixed a bug which prevented custom gamm and UTA to be
active
2003-08-14 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/sane-plustek.man: Added debug description
* backend/plustek.c backend/plustek-usbhw.c backend/plustek-usbshading.c
backend/plustek-usbscan.c backend/plustek-devs.c
Fixed warmup bug
Fixed EPSON12x0 and CanoScan hangs during init step
Some fine-tuning for the CanoScan devices
2003-08-10 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/plustek.desc: Update to new keywords,
added Genius Colorpage HR6X EPP
* TODO: moved Plustek topics to done section
2003-08-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Plustek OpticSlim 1200.
Updated Mustek Paragon 600 II ED/EP information.
2003-07-31 Peter Kirchgessner <peter@kirchgessner.net>
* doc/descriptions/hp.desc: Add status by model
2003-07-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: All the unsupported entries
that pointed to .txt files have links to HTML pages now.
2003-07-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Minolta and Visioneer
scanners. Updated Avision, Medion, and UMAX scanners.
* tools/check-usb-chip.c: Added test for Genesys Logig GL660 +
GL646 combination. Added some more messages about what's going
on.
* TODO: Added frontend linking issue and color management
discussion. Removed sanei_jpeg move and avision patch entries.
Updated global init issue and desc file entry.
* po/sane-backends.bg.po: Updated Bulgarian translation (from
Pavel Constantinov <pavelconstantinov@bigfoot.com>).
2003-07-29 Matthew Duggan <stauff1@users.sourceforge.net>
* backend/canon_pp.c: Reset globals in sane_exit.
2003-07-28 Andras Major <andras@users.sourceforge.net>
* doc/descriptions/coolscan2.desc: changed IEEE1394
to IEEE-1394 and changed to new status keyword scheme.
2003-07-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/Makefile.in po/sane-backends.bg.po: Added Bulgarian
translation (from Pavel Constantinov
<pavelconstantinov@bigfoot.com>).
2003-07-28 Thomas Soumarmon <thomas.soumarmon@cogitae.net>
* doc/descriptions/hp5400.desc : changed status to basic
2003-07-28 Thomas Soumarmon <thomas.soumarmon@cogitae.net>
* backend/hp5400_* : moved constant initialization to sane_init
and sane_exit + removed some compilation warnings.
2003-07-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* Makefile.in backend/Makefile.in doc/Makefile.in
frontend/Makefile.in include/Makefile.in sanei/Makefile.in: Minor
cleanup from the jpeg move. Reverted frontend link order.
2003-07-26 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-usb.c backend/snapscan-usb.h:
Changed license to GPL + SANE exception.
2003-07-26 Peter Fales <peter@fales-lorenz.net>
* sanei/Makefile.in, backend/cderror.h, backend/jinclude.h,
backend/dc210.c, backend/dc240.c, backend/ gphoto2.c,
backend/djpeg.c, backend/cdjpeg.h, backend/Makefile.in, configure
configure.in, frontend/Makefile.in: Move jpeg support file
to sanei directofiles to include/sane, and associated
configure changes
2003-07-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* include/sane/sanei.h include/sane/sanei_codec_ascii.h
include/sane/sanei_codec_bin.h include/sane/saneopts.h: Changed
license to GPL + SANE exception.
* AUTHORS frontend/scanimage.c: Updated email address of Andreas
Beck.
* include/lalloca.h include/lassert.h: Changed
license to GPL + SANE exception.
* LICENSE: Clarify that not all backends us GPL + SANE exception.
Fixed pointer to README.djpeg.
* sanei/linux_sg3_err.h: Added GPL + SANE exception license.
2003-07-25 Peter Fales <peter@fales-lorenz.net>
* include/sane/sanei_cderror.h, include/sane/sanei_jinclude.h
include/sane/sanei_jpeg.h sanei/sanei_jpeg.c: Install these
files as copies of the ones currently in backend. (The old
files will be deleted later)
* Moved backend/djpeg.README to README.djpeg and added usage info
2003-07-25 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx.conf doc/sane-gt68xx.man
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Added
Fujitsu 1200CUS to man page, .conf and .desc. Changed .conf file
to be more readable. Added RevScan 19200i to .conf file. Added
Plustek U16B to .desc and .conf, updated UT16B.
* po/sane-backends.de.po: Added some translations for the HP
backend. Minor header updates.
* po/sane-backends.cs.po po/sane-backends.es.po po/sane-backends.fr.po
po/sane-backends.nl.po po/sane-backends.no.po po/sane-backends.pt.po
po/sane-backends.ru.po po/sane-backends.sv.po: Regenerated to include
recent changes in the backends.
* include/sane/sanei_scsi.h include/sane/sanei_wire.h: Changed
license to GPL + SANE exception.
* TODO: Added canon630u SANE_I18N and include file license
problem. Updated .desc file section.
2003-07-24 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.c, backend/hp-option.h, backend/hp-option.c
po/Makefile.in: Add support for Internationalization for hp-backend.
2003-07-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/check-usb-chip.c: Added support for detecting Genesys
Logic GL646. Fixed indentation.
2003-07-23 Henning Meier-Geinitz <henning@meier-geinitz.de>
* include/sane/sanei_thread.h include/sane/sanei_usb.h: Changed
license to GPL + SANE exception.
2003-07-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/mustek_pp.desc: Tag CCD scanners as unsupported
and mention that they work in 1.0.9 or earlier.
2003-07-22 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/snapscan.desc: Updated to use new status values.
2003-07-22 Matthew Duggan <stauff1@users.sourceforge.net>
* doc/descriptions/canon_pp.desc: Updated to use new status values.
2003-07-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Added mustek_pp CCD support and avision patch
entry. Updated .desc file section.
* doc/descriptions/unsupported.desc: Added more information for
Canon 9900F.
2003-07-21 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/descriptions/umax_pp.desc: removed unwanted status line for
backend
2003-07-20 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/descriptions/umax_pp.desc: updated forgotten status to use new
keyword.
2003-07-20 Oliver Rauch <oliver.rauch@rauch-domain.de>
* backend/umax.c: changes for Umax UC630 3pass color scan
* doc/descriptopns/umax.desc: changed status
2003-07-19 Frank Zago <fzago at austin dot rr dot com>
* backend/teco2.c backend/teco2.h backend/teco2.conf: (from gerard
Klaver and Michael Holler) Better detection of the
scanner. Added white level. More work on some color resolutions.
* updated several backend descriptions file.
2003-07-19 Peter Fales <peter@fales-lorenz.net>
* doc/descriptions/gphoto2.c: Remove "status" (not used for
APIs) and correct typo in comment.
2003-07-19 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/as6e.desc doc/descriptions/bh.desc
doc/descriptions/coolscan.desc doc/descriptions/nec.desc
doc/descriptions/sm3600.desc doc/descriptions/st400.desc:
Converted to use new :status values.
* doc/descriptions/unsupported.desc: Sorted (more or less)
alphabetically. Added some Canon and Hewlett-Packard scanners.
* frontends/scanimage.c: When parsing string options whose
arguments are too short, don't overwrite the remaining command
line arguments. Print "[inactive]" after every inactive option.
* TODO: Added fujitsu patch, description file updates,
close_on_exec problem. Removed scanimage bugs.
2003-07-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-find-scanner.man tools/Makefile.in
tools/check-usb-chip.c tools/sane-find-scanner.c: Added support
for detecting USB chipsets to sane-find-scanner.
2003-07-17 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/sanei_scsi.c: improved SCSI error handling in
sanei_scsi_cmd2 for FREEBSD_CAM_INTERFACE
2003-07-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sanei/sanei_usb.c: Enable close_on_exec in sanei_usb_open.
2003-07-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Added fujitsu option and libtool problem. Updated desc
file entries.
2003-07-15 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/descriptions/umax_pp.desc: updated to use new :status
keyword.
2003-07-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Corex and Relisys
scanners. Updated Canon and HP scanners.
* doc/descriptions-external/primax.desc: Fixed typo.
2003-07-02 Thomas Soumarmon <thomas.soumarmon@cogitae.net>
* backend/hp5400_internal.c: Added version string for v0.87
which has been reported to work ok. Use of a list of versions
instead of several constants.
2003-07-02 Peter Fales <peter@fales-lorenz.net>
* backend/gphoto2.c: Suppress the "bad parameter" message printed
when a camera is not connected, by using Debug level 1
2003-07-01 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Memorex, Visioneer and
Xerox scanners. Updated information for Visioneer scanners.
2003-06-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Visioneer OneTouch 5800
USB.
* doc/doxygen-sanei.conf: Update version.
2003-06-25 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.darwin: Mention some more working scanners.
* doc/descriptions/unsupported.desc: Added Brother and Microtek
scanners.
2003-06-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/sane-desc.c: Mention backend name in warnings and errors.
2003-06-20 Michael Herder <crapsite@gmx.net>
* doc/descriptions/artec_eplus48u.desc: Updated status fields
2003-06-19 Peter Fales <peter@fales-lorenz.net>
* doc/descriptions/dc25.desc, dc240.desc: Updated status fields
2003-06-19 Simon Munton <simon@munton.demon.co.uk>
* doc/descriptions/pie.desc: Updated status fields
2003-06-19 Eddy De Greef <eddy_de_greef at tiscali dot be>
* doc/descriptions/mustek_pp.desc: Updated status fields of CIS type
scanners.
2003-06-19 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions.txt: Changed unmaintained tag to lowercase.
* doc/descriptions/template.desc.
doc/descriptions-external/template.desc.: Updated according to
descriptions.txt.
* doc/sane-gt68xx.man doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES: Added RevScan 19200i. Updated
device status entries.
* doc/descriptions/abaton.desc doc/descriptions/agfafocus.desc
doc/descriptions/apple.desc doc/descriptions/artec.desc
doc/descriptions/dc210.desc doc/descriptions/dll.desc
doc/descriptions/dmc.desc doc/descriptions/ibm.desc
doc/descriptions/ma1509.desc doc/descriptions/mustek.desc
doc/descriptions/mustek_usb.desc doc/descriptions/net.desc
doc/descriptions/pint.desc doc/descriptions/pnm.desc
doc/descriptions/qcam.desc doc/descriptions/ricoh.desc
doc/descriptions/s9036.desc doc/descriptions/sp15c.desc
doc/descriptions/tamarack.desc doc/descriptions/test.desc
doc/descriptions/v4l.desc: Updated to new status system.
Added "unmaintained" where appropriate. The status values are
sometimes guessed from the documentation.
* doc/descriptions/unsupported.desc: Added Benq parport scanners.
* doc/descriptions-external/hp4200.desc
doc/descriptions-external/hpoj.desc
doc/descriptions-external/niash.desc
doc/descriptions-external/primax.desc
doc/descriptions-external/scanwit.desc
doc/descriptions-external/v4l2.desc
doc/descriptions-external/viceo.desc: Updated to new status
system. The status values are sometimes guessed from the
documentation.
2003-06-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/sane-desc.c: Changed to use the new status system for
devices: unsupported, untested, minimal, basic, good, complete.
The old backend and device statuses are translated. Removed
the option to generate one big table of backends (wasn't used
anyway).
* doc/descriptions.txt: Explained the new status values. Removed
reference to emacs-lisp code for generation of HTML
files. Explained unsupported.desc.
* tools/sane-desc.el.in tools/sane-desc-ext.el: Removed because
these emacs-lisp scripts haven't been used for some time now.
Use sane-desc.c instead.
* configure configure.in tools/.cvsignore tools/Makefile.in
tools/README: Removed references to sane-desc.el.
* Makefile.in: Added ChangeLog-1.0.12 to DISTFILES.
2003-06-15 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.darwin: Minor updates.
* TODO: Added v4l2 problem, desc file issues. Removed sm3600
MacOS X problem + printing backends in configure.
* doc/descriptions/unsupported.desc: Added Canon D2400UF
and IS 12.
2003-06-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added link for HP 5550c.
* doc/descriptions/hp5400.desc doc/descriptions/ma1509.desc:
Removed :new marker.
* doc/descriptions/tamarack.desc: Removed link to
www.tamarack.net. Hostname is no longer in DNS.
2003-06-11 Oliver Schirrmeister <oschirr@abm.de>
* backend/fujitsu.c: fixed bug in that code when a scanner is
disconnected (anoah at pfeiffer dot edu)
2003-06-10 Michael Herder <crapsite@gmx.net>
* po/Makefile.in: Added Czech translation
* po/sane-backends.cs.po: Added Czech translation provided
by Josef <joeprusa at volny dot cz>
2003-06-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Canon 8000F. More info
for Avision/Umax scanners.
2003-05-27 Frank Zago <fzago at austin dot rr dot com>
* backend/teco2.c: fixed a bug regarding color shifting above X
max resolution. Added more working resolutions for the VM3575.
2003-06-05 Thomas Soumarmon <thomas.soumarmon@cogitae.net>
* hp5400 backend : synchronized sourceforge CVS with SANE CVS,
details below
added :
backend/hp5400_debug.c
backend/hp5400_debug.h
backend/hp5400_sane.c
backend/hp5400_sanei.h
backend/hp5400_internal.h
modified :
backend/hp5400.c
backend/hp5400.h
backend/hp5400_internal.c
backend/hp5400_sanei.c
backend/hp5400_xfer.h
to compile and run (on linux 2.4.21) as SANE backend and
in the corresponding hp5400backend sourceforge project
2003-06-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Removed saned issues.
* doc/descriptions/unsupported.desc: Added Microtek 336 CX.
* configure configure.in backend/Makefile.in: The list of backends
that are built is now in configure.in. Print backends that are
built. Allow manually setting the backends.
2003-06-05 Jochen Eisinger <jochen.eisinger@gmx.de>
* include/sane/sanei_pa4s2.h, sanei/sanei_pa4s2.c: New sanei_pa4s2
version supporting both raw IO and libieee1284. If you don't
have libieee1284 installed, you need to enable raw IO when
running configure
2003-06-06 Oliver Schirrmeister <oschirr@abm.de>
* backend/fujitsu.h backend/fujitsu.c doc/descriptions/fujitsu.desc:
remove SP15 code
sane_open actually opens the device you request
from (anoah at pfeiffer dot edu)
2003-06-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES: Don't check if the firmware is
loaded. The check seems to confuse the USB system on some UHCI
chips.
2003-06-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sanei/sanei_scsi.c: Fixed C++-like code for MacOS X (patch from
Mattias Ellert <mattias.ellert@tsl.uu.se>).
* acinclude.m4 aclocal.m4 configure frontend/saned.c
include/sane/config.h.in: Check if ss_family or __ss_family is
in struct sockaddr_storage. Otherwise diasbale ipv6. Patch from
Julien BLACHE <jb@jblache.org>.
2003-06-03 Oliver Schirrmeister <oschirr@abm.de>
* backend/fujitsu.c, backend/fujitsu.h: separated the 4x20
into another model and color support for the 4x20
2003-06-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/Makefile.in: hp5400 doesn't need sanei_config2.
2003-05-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/sane-backends.fr.po: Fixed two wrong codings of accented
characters.
* backend/net.c: Fixed bug concerning hosts that have both IPv6
and IPv4 addresses but only accept connections on IPv4. Patch
from Julien BLACHE <jb@jblache.org>.
* doc/descriptions/net.desc: Mention IPv6. Bump version number.
2003-05-27 Frank Zago <fzago at austin dot rr dot com>
* PROJECTS: Changed entry for win32 SANE project.
2003-05-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.html: Added link for Umax astra 4700.
2003-05-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Don't disable IPv6 if poll is not
found.
* frontend/saned.c: Use u_int_* instead of uint_*. That fixes
compilation for MacOS X (hopefully).
* doc/Makefile.in: Add option -nodepage to man2html to avoid
missing lines in the html output.
* doc/descriptions/unsupported.html: Added link for Spot scanners.
2003-05-25 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Warnings enabled again. Added -cvs to
version.
Older entries can be found in ChangeLog-1.0.12.
Generated by dwww version 1.15 on Sat May 18 12:22:36 CEST 2024.