2021-11-09 i3status 2.14
• switch to meson build system
• battery: OpenBSD: If acpibat watts value is not available, try current
• make pulseaudio an optional dependency
• print_cpu_usage: use buffered file API
• fix memory leak in slurp()
• NetBSD: native audio support
• wireless: Linux: update %signal and %quality based on station info
• memory: introduce unit and decimals options
• battery: introduce format_percentage option
• memory: fix overflow on 32-bit systems
• use format_placeholder
• wireless: introduce format_bitrate, format_noise and format_signal
• cpu: fix out of bounds read after invalid %cpu conversion
• file system: use f_frsize for correct block size
• wireless: FreeBSD: support connection bitrate
• volume: fix memory leak
• print_file_contents: resolve tilde
• add build option to disable manual pages
• pulseaudio: use port name instead of sink name
• battery: add support for POWER_SUPPLY_TIME_TO_EMPTY (e.g. pinebook pro)
• tztime: allow selective pango markup
• wireless: fix memory corruption
2019-06-30 i3status 2.13
• add memory module
• add read_file module
• drop CAP_NET_ADMIN (not needed on Linux ≥ 2.6.37)
• switch to autotools
• battery: hide seconds by default
• wireless: add format_quality
• doc: clarify min_width not being supported with dzen2/xmobar
• battery: read multiple batteries on DragonFlyBSD
• make: don’t use pulseaudio on DragonFlyBSD
• wireless: detect interface type on DragonFlyBSD
• cpu usage: fix: correctly print usage for cpu 10
• cpu usage: fix: correctly print for invalid %cpu placeholder
• cpu usage: support non-consecutive CPUs
• time: add only_when_tz_different option
• ethernet: add %interface
• ethernet: fix speed display for 100 Gbit/s cards
• battery: handle POWER_SUPPLY_STATUS=Not charging
• volume: provide more natural volume percentage with ALSA
• volume: fix ALSA capture device monitoring
• volume: implement %devicename for PulseAudio and ALSA
• config: re-arrange disk after network interfaces
• fix: include sys/socket.h on macOS
• fix: strip network interface labels
• fix glob(3) error handling
• various testsuite improvements
• switch to clang-format-3.8
2018-05-11 i3status 2.12
• fix NULL value on OpenBSD when there is no acpitz0
• show IP address when address has a label
• man: explicitly use format_up/format_down in ethernet, wireless conf
• man: remove SLOC comment
• treat zero battery capacity as "not available"
• add IPv6 address when IPv4 isn't available
• call tzset at each time print to pick up time zone changes
• doc: fixed minor typos
• be more cautious about handling invalid battery measurements.
• Makefile: make PKG_CONFIG overridable
• fix CPU unit tests
• use local timezone for battery %emptytime
• fix memory leak/use BEGINS_WITH macro
• _first_: add check for virtual ethernet devices
• add battery capacity parsing
• multiple CPU support for cpu_usage
• remove useless checks (we use char, not unsigned char) to fix compilation warnings
• disk: sanitize trailing slashes
• plug an fd leak in the OpenBSD-specific code for
• suppress printing :00 seconds of remaining battery lifetime, as apm(4)'s
estimate only has a granularity of minutes.
• fix the deciKelvin to Celsius conversion on FreeBSD
• make first_eth_interface() work on OpenBSD
• include sys/select.h on OpenBSD
2017-01-21 i3status 2.11
• re-add forgotten wakeup call from SIGUSR1 handler
• disk_info: bugfix: check format_not_mounted is not NULL before using it
• revert back to using nanosleep
• man: give more descriptive symbols to battery format
• battery: removes the 'remaining' time when the battery is full
• add separator and separator_block_width as universal module options
• man: fix link to contrib
• cpu_temperature: add glob check
• battery: add status_unk
• reconnect to PluseAudio when connection is lost
• wireless: add ifdef to compile on macOS
• order default configuration paths the same as in i3
• add version files for release tarball
• man: make tztime example config match the context
• cpu_usage: add color thresholds
• battery: support multiple batteries
• disk: use empty string for not mounted disks
• default config: remove DHCP, VPN
• wireless: fix FTBFS on hurd and kFreeBSD
• parse uevent file to detect network device type
• allow pulse device to be specified by name
• battery: find batteries using glob
• tztime: support locales
• wireless: use blank padding for quality
• add unit tests
• fix compilation with -fno-common
2016-01-01 i3status 2.10
• man: fix typo in battery example
• Pass the "instance" JSON property key for tztime blocks
• Fix build (and build warnings) on FreeBSD
• Fix build on OpenBSD
• path_exists, run_watch: add format_down
• volume: add PulseAudio support. This significantly reduces battery
consumption on systems that use PulseAudio, which is the default on any
modern Linux desktop.
• wireless/OpenBSD: use the maximum rssi, not the scaled percentage for the
signal level.
• make: Add support for differing PREFIX and MANPREFIX.
• battery: make output HH:MM across all platforms.
• battery: clamp the percentage at 100% when last_full_capacity is enabled.
• Use format_not_mounted if the directory for a disk_info block does not
exist.
• disk_info/OS X: Fix build.
• volume/OpenBSD: use SndIO.
• eth, wireless: Use "color_degraded" when interface has no IP.
• eth, wireless/FreeBSD: Fix for recent FreeBSD versions.
• wireless/Linux: switch from libiw to libnl. This allows you to run i3status
on kernels which don’t have the wext compatibility module enabled.
• battery/FreeBSD: properly detect charging status
• eth: first_eth_interface: ignore MAC addresses, look for IPv4/IPv6 addresses
• Implement support for Pango markup.
• format detection: recognise swaybar
2015-03-22 i3status 2.9
• meta: i3status is now on GitHub and uses clang-format
• allow customization of the module separator
• add “align” and “min_width” options for each module
• fix CFLAGS and LDFLAGS for DragonFly and FreeBSD
• add contrib/net-speed, a more light-weight reimplementation of
contrib/measure-net-speed.bash
• battery: add hide_seconds option
• battery: fix for systems without POWER_SUPPLY_VOLTAGE_NOW
• battery: for %percentage, drop leading 0 for values < 10
• battery: add NetBSD support
• battery: use absolute values for (dis)charging rates
• battery: introduce status_{chr,bat,full}
• cpu_temperature: fix displaying multiple sensors
• cpu_temperature: fix NetBSD support
• cpu_temperature: fix DragonFly support
• disk: introduce threshold_type and low_threshold
• disk: add format_not_mounted for unmounted paths
• ethernet, wireless: support special interface name _first_
• run_watch: check all matching pid files until first valid one
• volume: fix wrong color tags with xmobar
• wireless: support %frequency (2.4 vs. 5 GHz)
2014-01-05 i3status 2.8
• Fix build on GNU/Hurd
• Add format_down for battery if no battery is available
• Use degraded color in case volume is muted with OSS
• Support mixer_idx with OSS
• Enable colored output for battery on FreeBSD
• print_volume: don’t return, complete the buffer first
• Support colored output for CPU temperature on FreeBSD
• manpage: mention i3bar in the description
• manpage: be more explicit about the path option
• battery: use path as i3bar JSON “instance”
• print_volume(linux): Open a new mixer every time
• Implement term output format
• signal handler: set flag because directly calling fprintf() is unsafe
• Makefile: use .SILENT and support V=1 for verbose builds
• load: allow max_threshold to be a float
• manpage: Add example path for CPU temperature
• Fix build on NetBSD
• Implement cpu usage, ethernet status, cpu temperature on NetBSD
• fix slurp(), it needs to read size-1 for the trailing NUL
• format detection: simplify code, handle "sh" processes in the hierarchy
• default config: show %avail disk space instead of %free
• Added different format string for volume in case it is muted
• manpage: document format_muted
• add support for path_exists directive
• disk: Distinguish between IEC, SI and custom prefixes
2013-02-27 i3status 2.7
• Various battery fixes for OpenBSD
• Implement %speed for ethernet on OpenBSD
• Implement %essid and %signal for wireless on OpenBSD
• Skip a day in the Discordian calendar when St. Tib's Day has passed
• colors: Handle down wireless interfaces just like ethernet interfaces
• Use acpitz(4) instead of cpu(4) for temperature on OpenBSD
• temperature: introduce max_threshold
• temperature: allow for abitrary sensors to be selected with 'path' on OpenBSD
• battery: colorize output even without discharge rate
• ddate: Reduce the season day to 0-9 to properly print ordinal suffixes
• add good, degraded and bad colors per module
• config: introduce an utf-8 character so that editors are forced to use utf-8
• ddate: Teen ordinal numbers always use a 'th' suffix.
• DragonFlyBSD support added
• make SIGUSR1 do nothing, so that killall -USR1 i3status will force an update
• changing volume color from bad to degraded if muted
• make refreshs align with minutes
• wifi: properly display ad-hoc networks
• Bugfix: output auto detect: properly detect ambiguous situations
• Add tztime module to support multiple different timezones
• battery: add option to show capacity without decimals
• Add colorized output for load avg
• ipv6: properly handle colors for output_format == xmobar
• contrib: fix premature insetion of status message into JSON
2012-10-03 i3status 2.6
• Error handling: Properly output JSON errors in the battery module
• Colorize battery output if remaining time/percentage below threshold
• Colorize volume in red if muted
• Include a Perl and Python example wrapper script for i3status’s JSON output
• Avoid division by zero when calculating CPU usage
• Add consumption to battery info
• Use correct units for battery calculations
• Add percentage values for disk info
• Save the DNS lookup for k.root-servers.net in the ipv6 module
2012-05-11 i3status 2.5.1
• Handle %d with non-default CPU temperature path
• Improve error message when the cpu temperature cannot be read
• Remove cpu_temperature from the default config
• Error handling: Never output null as full_text (JSON), prefix messages with i3status
2012-05-02 i3status 2.5
• implement the i3bar JSON protocol
• Fix configuration paths in error message
• manpage: add a "format" example for run_watch
• manpage: add a section explaining why we don’t want RAM usage etc.
• manpage: add "exit 1" to example shell script.
• manpage: document %emptytime to the battery part
• various patches for OpenBSD
2011-12-27 i3status 2.4
• Support wifi, cpu usage, volume, disk usage on FreeBSD
• Don’t exit, but display an error when CPU temperature/usage/load is not
available
• manpage: load format is %1min %5min %15min
• Don’t use a default order, so that config files can use += everywhere
• Interpret configfiles case-insensitive
• battery: implement path option for batteries with non-standard paths
2011-07-21 i3status 2.3
• config search order is now ~/.i3status.conf, ~/.config/i3status/config,
/etc/i3status/config, then /etc/xdg/i3status/config
• battery: use POWER_NOW if CURRENT_NOW is not available (linux >= 2.6.36)
• use kill(0, pid) instead of /proc to check if a process is alive
• cache DNS query results also if there is no IPv6 connectivity
• implement the 'path' option for cpu_temperature
• add cpu_usage module
• automatically detect the output format unless configured specifically
• Bugfix: get time at the beginning of the loop
• Bugfix: respect locale settings (for %c in date format)
• debian: use [linux-any] in dependencies (Closes: #634491)
2010-09-22 i3status 2.2
• Implement a discordian date module (like ddate(1))
• Implement ALSA volume support
• disk: implement %avail (different from %free with regard to the reserved
space of your filesystem)
• wireless: display quality relative to the wireless maximum quality.
• wireless: display connection speed (bitrate)
• wireless: custom colors for link quality
• Bugfix: Treat an interface as 'down' when it cannot be found in
/proc/net/wireless
• Bugfix: Correctly check for interface up/down status
2010-04-10 i3status 2.1
• battery: implement %emptytime, the time of day when your battery is empty
• ipv6: cache DNS query lookups (for finding the K root server)
• disk: also round when printing TB
• wireless: display no IP instead of (null)
• instead of a relative sleep(1), sleep until the full second
• colorize ethernet output
• use cap_net_admin instead of running i3status as root for getting
ethernet link speed
• ipv6: don't require a title for config option
• ipv6: provide format strings for ipv6 up and ipv6 down
2009-10-27 i3status 2.0
• add support for disk info (free/used/ins)
• add support for displaying the ESSID of the wireless interface
• add support for getting the public IPv6 address of the system
• all "modules" now support format strings
• switch to libconfuse for parsing the config file
• merge support for FreeBSD for many "modules"
• drop support for wmii, add support for xmobar
2009-06-21 i3status 1.2
• Handle SIGPIPE to avoid zombie processes
2009-06-17 i3status 1.1
• Implement getting temperature from thermal zones (Thanks atsutane)
Generated by dwww version 1.15 on Sat May 18 08:18:35 CEST 2024.