2022-04-07 Jim Meyering <meyering@fb.com>
version 1.12
* NEWS: Record release date.
2022-04-07 Paul Eggert <eggert@cs.ucla.edu>
zgrep: fix "binary file matches" mislabeling
Problem reported by Jim Avera (Bug#31280).
This became more of an issue when GNU grep 3.5 (2020) started sending
"binary file matches" diagnostics to stderr instead of to stdout.
* tests/Makefile.am (TESTS): Add zgrep-binary.
* tests/zgrep-binary: New test.
* zgrep.in (args): New var, to accumulate args separately
from grep command, so we can prepend args if need be.
Most uses of 'grep' changed to use 'args' instead, or also.
(with_filename): Set to 1 if more than one file and -h not given;
this simplifies later code.
(gnuish_grep): New var; evaluates to true if grep supports
-H and --label options, as is true for GNU and FreeBSD grep.
Append -H to 'grep' if outputting file names with GNUish grep,
and use --label with GNUish grep unless reading from stdin,
as that’s safer and more efficient than relabeling with 'sed'.
maint: use C locale more often
* gzexe.in, zdiff.in, zgrep.in:
Run expr and sed in the C locale when it might help to avoid
undefined behavior on non-GNU platforms.
* sample/zfile, znew.in: Run in the C locale, for simplicity and
to avoid undefined behavior on non-GNU platforms.
gzexe: optimize out a grep
* gzexe.in: Avoid an unnecessary invocation of ‘grep’,
by using sed instead. Also, look only for at-most-3-digit numbers,
for consistency with the rest of the script.
gzip: mention when fixed bugs were introduced
zgrep: port to POSIX sed
* zgrep.in (res): When escaping the file name do not rely on GNU
sed’s extension to POSIX with respect to s/.../\n/. Instead, use
features that should also work with AIX and/or Solaris sed. This is
simpler anyway, and would have prevented the recently-fixed bug.
2022-04-07 Jim Meyering <meyering@fb.com>
zgrep: add NEWS and tests for this exploitable bug
* tests/zgrep-abuse: New file, based on PoC by cleemy desu wayo.
* tests/Makefile.am (TESTS): Add it.
* NEWS: Mention the exploit.
The bug appears to have been present since the beginning.
2022-04-06 Lasse Collin <lasse.collin@tukaani.org>
zgrep: avoid exploit via multi-newline file names
* zgrep.in: The issue with the old code is that with multiple
newlines, the N-command will read the second line of input,
then the s-commands will be skipped because it's not the end
of the file yet, then a new sed cycle starts and the pattern
space is printed and emptied. So only the last line or two get
escaped. This patch makes sed read all lines into the pattern
space and then do the escaping.
This vulnerability was discovered by:
cleemy desu wayo working with Trend Micro Zero Day Initiative
2022-04-06 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix i386 port
* deflate.c (prev_length, match_start, max_chain_length, good_match):
Make these extern instead of static, reverting part of the
2021-12-01T21:46:36Z!eggert@cs.ucla.edu patch. These symbols are
used by i386 asm, and so must be extern at least for i386.
maint: pacify GCC with recent x86 glibc
* configure.ac (WERROR_CFLAGS): Disable -Wtype-limits,
due to a false alarm on platforms where 'long' is 32 bits
and time_t is 64-bit, such as recent glibc on x86.
2022-04-04 Paul Eggert <eggert@cs.ucla.edu>
maint: update from Gnulib
* bootstrap, tests/init.sh: Copy manually from current Gnulib.
* lib/.gitignore, m4/.gitignore: Update as per current Gnulib.
build: update gnulib submodule to latest
build: support --program-prefix etc.
Problem reported by Antonio Diaz Diaz via Dagobert Michelsen in:
https://bugs.gnu.org/16876
* Makefile.am (.in): Substitute for 'gzip', 'zdiff', 'zgrep'.
($(GZIP_TRANSFORMED), $(ZDIFF_TRANSFORMED), $(ZGREP_TRANSFORMED)):
New rules to build forwarding shell scripts, if needed.
Add these files to BUILT_SOURCES and MOSTLY_CLEANFILES if needed.
* configure.ac (GZIP_TRANSFORMED, ZDIFF_TRANSFORMED, ZGREP_TRANSFORMED):
New substituted vars.
(GZIP_IS_TRANSFORMED, ZDIFF_IS_TRANSFORMED, ZGREP_IS_TRANSFORMED):
New Automake conditions.
* gunzip.in, gzexe.in, zcat.in, zcmp.in, zdiff.in, zegrep.in:
* zfgrep.in, zforce.in, zgrep.in, zless.in, zmore.in, znew.in:
Quote possibly-transformed subcommand names.
2022-04-01 Paul Eggert <eggert@cs.ucla.edu>
doc: improve doc for saved timestamps etc.
Problem reported by Carpe Sébastien (Bug#24559).
2022-03-31 Paul Eggert <eggert@cs.ucla.edu>
tests: port list-big test to macOS 12.1
* tests/list-big: Use dd, not truncate, to create a big file.
zmore: don't assume benign PAGER in testing
* tests/help-version (zmore_setup): Unset PAGER so that we test
'more', not whatever the tester has in its PAGER environment
variable. This works around a problem I found when I ran
'PAGER=less make check' on a platform that lacked 'less'.
zless: install only on platforms with 'less'
Problem reported by Michael Felt (Bug#30029).
* Makefile.am (ZLESS_MAN, ZLESS_PROG): New macros.
(man_MANS, bin_SCRIPTS): Use them.
* configure.ac: Check for 'less'.
* tests/Makefile.am (ZLESS_PROG): New macro.
(built_programs): Use it.
2022-03-29 Paul Eggert <eggert@cs.ucla.edu>
doc: spelling fixes
doc: omit @refill
* doc/gzip.texi: Remove @refill to suppress warning
‘gzip.texi:562: warning: @refill is obsolete.’ from makeinfo 6.8.
2022-03-08 Paul Eggert <eggert@cs.ucla.edu>
zdiff: fix another arg-handling bug
Also allow args after file names.
Problem reported by Lv Ying <https://bugs.gnu.org/54290#12>.
2022-03-07 Paul Eggert <eggert@cs.ucla.edu>
zdiff: fix arg handling bug
Problem reported by Lv Ying (Bug#54291).
* zdiff.in (escape): Handle args like '-C 5'.
2022-02-10 Paul Eggert <eggert@cs.ucla.edu>
doc: embolden SEE ALSO refs
Problem reported by Helge Kreutzmann (Bug#53918).
2022-01-03 Jim Meyering <meyering@fb.com>
maint: avoid new syntax-check failures
* cfg.mk (local-checks-to-skip): Add sc_indent, to skip it.
Otherwise, "make syntax-check" would fail.
build: disable some expensive compiler warnings by default
* configure.ac (gl_GCC_VERSION_IFELSE): Copy from coreutils.
(gcc-warnings): Update from coreutils.
maint: make update-copyright
build: update gnulib to latest; also bootstrap and init.sh
2021-12-15 Paul Eggert <eggert@cs.ucla.edu>
doc: document gzip -l change
* NEWS, doc/gzip.texi (Invoking gzip), gzip.1 (gunzip):
Document recent change.
gzip: gzip -l now outputs accurate size
gzip -l now decompresses to see how long the uncompressed file was.
This fixes what is by far the most common bug report for gzip.
It has a significant performance cost, but it’s worth it nowadays.
* gzip.c (main): -l now sets 'test' too. All uses of
'test' changed.
(treat_stdin, treat_file): Call do_list after decompressing,
so that the length is known.
(do_list): Omit arg IFD, since it is no longer needed.
All callers changed. Get the CRC and uncompressed size
from input_crc and bytes_out instead of using lseek.
* tests/list-big: New test.
* unzip.c (unzip): Set unzip_crc before returning.
* util.c (write_buf): If 'test', output nothing.
Update bytes_out with output byte count, regardless of 'test'.
All callers changed.
2021-12-01 Paul Eggert <eggert@cs.ucla.edu>
maint: reduce module coupling
If a symbol is extern but never used by another module, make it
static instead, or remove it if it is not used anywhere.
* Makefile.am (gzip_SOURCES): Remove lzw.c.
* bits.c (bi_buf, bi_valid) [!IBM_Z_DFLTCC]:
* deflate.c (prev_length, match_start, max_chain_length)
(good_match, lm_init):
* gzip.c (verbose) [!DEBUG]:
* unlzw.c (block_mode):
Now static.
* gzip.c (help, main, do_lzw):
* revision.h:
Simplify by assuming !LZW.
* util.c (setcrc): Define only if IBM_Z_DFLTCC.
(make_simple_name): Define only if NO_MULTIPLE_DOTS.
2021-10-30 Paul Eggert <eggert@cs.ucla.edu>
maint: modernize README-{hacking,prereq}
2021-09-07 Paul Eggert <eggert@cs.ucla.edu>
build: update gnulib submodule to latest
2021-09-03 Jim Meyering <meyering@fb.com>
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.11
* NEWS: Record release date.
2021-08-31 Paul Eggert <eggert@cs.ucla.edu>
tests: port still better to NetBSD
* tests/hufts: Ignore more lines starting with ‘+’ in stderr.
tests: port better to NetBSD
* tests/hufts, tests/zdiff:
Ignore lines starting with ‘+’ in stderr.
The NetBSD shell outputs them after set -x.
tests: update help-version from coreutils
This merges coreutils/tests/misc/help-version.sh into
gzip/tests/help-version; they're now identical except
for the initial init.sh configuration line. This
should port better to NetBSD.
maint: update .gitignore files
* .gitignore, lib/.gitignore, m4/.gitignore:
Bring up to date. Remove duplicates. Sort.
tests: port two-files to IRIX 6.5
Problem reported by Nelson H. F. Beebe.
* tests/two-files: Skip test if /dev/urandom is not readable.
2021-08-29 Jim Meyering <meyering@fb.com>
build: update gnulib to latest
maint: don't send announcements to TP coordinator
gzip has no translatable strings, so don't include the translation
project coordinator's email address in the announcement template.
* cfg.mk (translation_project_): Define to be empty.
2021-08-19 Paul Eggert <eggert@cs.ucla.edu>
gzip: clarify "other links" diagnostic
* gzip.c (treat_file): Instead of saying
"gzip: FOO has 1 other link -- unchanged", say
"gzip: FOO has 1 other link -- file ignored".
This is clearer when -k is also used (Bug#50097).
2021-08-08 Jim Meyering <meyering@fb.com>
build: update gnulib to latest
2021-06-30 Jim Meyering <meyering@fb.com>
build: update gnulib to latest
2021-04-11 Dmitry V. Levin <ldv@altlinux.org>
bug#47715: [PATCH] gzip.c: use a more portable alignment
The alignment of 8192 introduced by commit
be0c5581e38332b2ffa8a4cf92076cfde02872b4 is not quite portable:
eu-elflint --gnu-ld complains about the result gzip executable
with the following diagnostics:
section [25] '.bss' not fully contained in segment of program header entry 6
* gzip.c [__alignas_is_defined] (BUFFER_ALIGNED): Decrease alignment
from 8192 back to 4096.
2021-03-07 Paul Eggert <eggert@cs.ucla.edu>
maint: modernize .gitignore
* lib/.gitignore, m4/.gitignore: Sort and modernize
to current Gnulib.
zgrep: fix option typo
* zgrep.in: Fix typo in option processing that prevented
operands like ‘binary-1’.
gzip: port to SIGPIPE-less platforms
* gzip.c (main): Don’t assume SIGPIPE is defined.
2021-02-26 Paul Eggert <eggert@cs.ucla.edu>
* gzip.1: Quote better (Bug#46730).
2021-01-01 Jim Meyering <meyering@fb.com>
maint: update all copyright year number ranges
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
2020-12-09 Jim Meyering <meyering@fb.com>
maint: avoid another autoreconf warning
* configure.ac: modernize AC_TRY_COMPILE invocation
Use AC_COMPILE_IFELSE instead of AC_TRY_COMPILE.
maint: remove uses of obsolete macros
* configure.ac (AC_TYPE_SIGNAL, AC_ISC_POSIX, AC_HEADER_STDC): Remove.
maint: avoid autoreconf warnings
* configure.ac: Go back to using AC_PROG_CC rather than AC_PROG_CC_STDC,
as the latter is obsolescent and the Autoconf bug involving the former
has been fixed.
build: update gnulib to latest
build: require autoconf-2.64
* configure.ac: Require autoconf-2.64, up from 2.63, to align with gnulib.
2020-09-24 Ilya Leoshkevich <iii@linux.ibm.com>
Add a test for compressing and decompressing two files
It ensures that compression and decompression state of the first file
does not affect the second file.
Fix DFLTCC segfault when compressing or decompressing two files
The value in total_in global variable from processing the first file
affected processing of the second file. Fix by making total_in local.
bug#43583: Fix building DFLTCC with clang
clang does not support .machinemode, so put it under an #ifdef.
Update .gitignore files
On my s390x Fedora 31 machine there are a bunch of extra files copied to
lib and m4 directories. Add them to .gitignore.
2020-08-31 Paul Eggert <eggert@cs.ucla.edu>
doc: prefer bold to italics for command names
2020-05-29 Ilya Leoshkevich <iii@linux.ibm.com>
IBM Z DFLTCC: add STREQ definition
Commit 81c9fe4d0986 replaced !strcmp with STREQ in order to be compliant
with the gnulib linter, however, gnulib does not provide STREQ!
Quite a few gnulib .c files contain private definitions of STREQ. This
patch just goes with the flow and does the same in dfltcc.c.
2020-03-21 Jim Meyering <meyering@fb.com>
build: update gnulib to latest
2020-03-21 Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
doc: gzip.1: Change .BR to .B as there is only one argument
* gzip.1: Use .B rather than .BR to avoid diagnostics from an
upcoming version of groff:
$ groff -b -e -mandoc -T utf8 -rF0 -t -w w -z
<gzip.1>:327 (macro BR): only 1 argument, but more are expected
<gzip.1>:459 (macro BR): only 1 argument, but more are expected
This addresses https://bugs.gnu.org/39845
2020-03-14 Jim Meyering <meyering@fb.com>
doc: man page improvements
* gzip.1 (REPORTING BUGS): New section.
(-t, --test): Add "then quit" at end of sentence to clarify what
this option does.
Reported by Dan Jacobson in https://bugs.gnu.org/839768.
2020-01-10 Ilya Leoshkevich <iii@linux.ibm.com>
IBM Z DFLTCC: fix three data corruption issues
SUSE maintainers have found an issue related to building zlib in 31-bit
mode, which also applies to gzip: STFLE instruction can be used only in
z/Architecture mode: https://build.opensuse.org/request/show/708284 --
I have integrated the fix into this patch.
* configure.ac (AC_CHECK_HEADERS_ONCE): Add feature detection for
sys/sdt.h probes.
* dfltcc.c (dfltcc_cc): Minor formatting improvements.
(HB_BITS): Remove.
(HB_SIZE): Likewise.
(is_dfltcc_enabled): Fix buffer overrun on newer models and incomplete
initialization on older models.
Add machine mode hint.
(dfltcc): Use sys/sdt.h feature detection.
(bi_load): New function.
(bi_close_block): Use bi_load.
(close_stream): Fix overwriting the End-of-block Symbol.
(dfltcc_deflate): Fix losing partial byte on flush.
Fix setting Block-Continuation Flag when DFLTCC-CMPR outputs 0 bits and
requests a retry.
Minor formatting improvements.
(dfltcc_inflate): Retry immediately if requested.
Print the hardware error code and flush the output buffer on error.
Minor formatting improvements.
* tests/hufts: Ignore the hardware error code.
2020-01-05 Ilya Leoshkevich <iii@linux.ibm.com>
Document IBM Z environment variables
IBM Z patch (7a6f9c9) introduced 6 environment variables, which are
used to tune the compression and decompression with the DEFLATE
COMPRESSION CALL instruction. This patch adds texinfo documentation for
all of them.
* doc/gzip.texi (Environment): Add DFLTCC* environment variables.
2020-01-01 Jim Meyering <meyering@fb.com>
maint: update all copyright year number ranges
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
maint: change calloc module to calloc-gnu
* bootstrap.conf (gnulib_modules): Use calloc-gnu module,
not the deprecated "calloc".
2019-09-07 Jim Meyering <meyering@fb.com>
maint: placate strcmp-vs-STREQ syntax check rule
* dfltcc.c (is_dfltcc_enabled): Use STREQ (env, "0")
in place of "!strcmp (env, "0").
2019-04-02 Paul Eggert <eggert@cs.ucla.edu>
Improve IBM Z patch
Most of this is minor changes to use GNU style and C99 constructs.
* NEWS: Mention IBM Z.
* bootstrap.conf (gnulib_modules): Add stdalign.
* dfltcc.c: Include stdalign.h, stdbool.h.
(union aligned_dfltcc_qaf_param, union aligned_dfltcc_param_v0):
New types, used for C11-style alignment. All uses changed.
(init_param):
* gzip.c (BUFFER_ALIGNED): New macro.
(inbuf, outbuf, window): Use it, so buffers are aligned everywhere.
* gzip.h (INBUFSIZ, OUTBUFSIZE): Use big buffers everywhere,
unless SMALL_MEM.
* zip.c (SLOW, FAST): Now enums since they need not be macros:
2019-04-02 Ilya Leoshkevich <iii@linux.ibm.com>
bug#34918: [PATCH] Add support for IBM Z hardware-accelerated deflate
Future versions of IBM Z mainframes will provide DFLTCC instruction,
which implements deflate algorithm in hardware with estimated
compression and decompression performance orders of magnitude faster
than the current gzip and ratio comparable with that of level 1.
This patch adds DFLTCC support to gzip. In order to enable it, the
following build commands should be used:
$ ./configure --enable-dfltcc
$ make
When built like this, gzip would compress in hardware on level 1, and in
software on all other levels. Decompression will always happen in
hardware. In order to enable DFLTCC compression for levels 1-6 (i.e. to
make it used by default) one could either add -DDFLTCC_LEVEL_MASK=0x7e
at compile time, or set the environment variable DFLTCC_LEVEL_MASK to
0x7e at run time.
Two DFLTCC compression calls produce the same results only when they
both are made on machines of the same generation, and when the
respective buffers have the same offset relative to the start of the
page. Therefore care should be taken when using hardware compression
when reproducible results are desired. One such use case - reproducible
software builds - is handled explicitly: when SOURCE_DATE_EPOCH
environment variable is set, the hardware compression is disabled.
This patch tries to add DFLTCC support in a least intrusive way.
All SystemZ-specific code was placed into a separate file, but
unfortunately there is still a noticeable amount of changes in the
main gzip code. Below is the summary of those changes.
DFLTCC will refuse to write an End-of-block Symbol if there is no input
data, thus in some cases it is necessary to do this manually. In order
to achieve this, bi_buf and bi_valid were promoted to extern variables.
lm_init() function moves the input buffer into the window, which is not
desirable for DFLTCC. Therefore, its invocation was moved to
software-only deflate(). In addition to initializing the window, this
function also used to convert compression level to flags, which is still
needed for DFLTCC. This responsibility was handed off to zip() function.
To achieve maximum performance with DFLTCC, inbuf and outbuf must be
256k big and page-aligned. Additionally, for DFLTCC to work at all, the
window must be page-aligned.
In addition to compression, DFLTCC computes CRC-32 checksum, therefore,
whenever it's used, software checksumming needs to be suppressed and its
results replaced by those of dfltcc. This is achieved by introducing the
new getcrc() and setcrc() functions.
Unlike the current software implementation, DFLTCC decompresses data
into the output buffer, and not the window. Therefore, just like
flushing the window, flushing the output buffer must honor the test
flag.
Finally, znew-k test assumes that "znew -K" would not convert the test
.Z file to .gz, which is not the case with DFLTCC. Since this is not the
main point of the test, this assumption was relaxed.
2019-03-26 Paul Eggert <eggert@cs.ucla.edu>
gzexe: fix count of lines to skip
Problem reported by Jakub Martisko (Bug#35002).
* gzexe.in (skip): Bump from 44 to 49.
2019-01-20 Jim Meyering <meyering@fb.com>
build: ensure no VLA is used
Cause developer builds to fail for any use of a VLA.
VLAs (variable length arrays) limit portability.
* configure.ac (nw): Remove -Wvla from the list of disabled warnings,
thus enabling the warning when configured with --enable-gcc-warnings.
(GNULIB_NO_VLA) Define, disabling use of VLAs in gnulib. This commit
is functionally equivalent to coreutils' v8.30-44-gd26dece5d.
build: update gnulib to latest
2019-01-01 Jim Meyering <meyering@fb.com>
maint: update all copyright dates via "make update-copyright"
* gnulib: Also update submodule for its copyright updates.
2018-12-29 Jim Meyering <meyering@fb.com>
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.10
* NEWS: Record release date.
2018-12-23 Paul Eggert <eggert@cs.ucla.edu>
build: enable -Wunreachable-code
* configure.ac (nw): Remove -Wunreachable-code from the list of
disabled warnings, now that all offending statements have been removed.
maint: remove unreachable code
Problem reported by Oracle Developer Studio 12.6.
In the old days we needed a return statement at the end of
the gzip main function to pacify traditional 'lint', but
lint checkers nowadays are smarter.
* gzip.c (main):
* zip.c (file_read): Remove unreachable code.
2018-12-23 Jim Meyering <meyering@fb.com>
maint: use a slightly cleaner expression
* gzip.c (do_list): Simplify an expression:
- int positive_off_t_width = INT_BUFSIZE_BOUND (off_t) - 2;
+ int positive_off_t_width = INT_STRLEN_BOUND (off_t) - 1;
2018-12-22 Jim Meyering <meyering@fb.com>
build: avoid build failure with --enable-gcc-warnings and latest gcc
* gzip.c (do_list): There was a loop to compute the maximum width
of a decimal positive off_t value. Replace it with assignment to a
constant. Noticed because gcc 9.0.0 20181219 warned about its use
as a printf format-width value.
(OFF_T_MAX): Remove now-unused definition.
2018-12-21 Jim Meyering <meyering@fb.com>
maint: improve a comment
* trees.c (flush_block): Fix grammar/spelling in a comment.
maint: update gnulib to latest; also update bootstrap and init.sh
build: make the autoconf-2.63 requirement explicit
* configure.ac: AC_PREREQ: Require 2.63, not 2.59.
Autoconf-2.63 has been required for some time via gnulib.
This merely makes it explicit.
2018-11-30 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix use of uninitialized memory
Problem reported by Hanno Böck (Bug#33501).
* NEWS: Mention this.
* inflate.c (inflate_dynamic): Return if code is invalid.
Fix by Mark Adler.
* tests/hufts: Add test case for the bug.
2018-08-19 Paul Eggert <eggert@cs.ucla.edu>
* gzip.c (remove_output_file): Fix typo.
gzip: fix bug in signal-handling fix
Problem reported by Johannes Przybilla (Bug#32375#26).
* gzip.c (volatile_strcpy): Source is now pointer-to-volatile too.
(remove_output_file): Copy remove_ofname to a private nonvolatile
copy so that it can be passed to xunlink safely.
2018-08-06 Paul Eggert <eggert@cs.ucla.edu>
Fix some theoretical races in signal handling
Problem reported by Johannes Przybilla (Bug#32375).
* NEWS: Mention this.
* bootstrap.conf (gnulib_modules): Add sigaction.
* gzip.c (SA_NOCLDSTOP, sigprocmask, sigset_t)
(siginterrupt) [!SA_NOCLDSTOP]: Remove; Gnulib not supplies these.
(remove_ofname): New var.
(volatile_strcpy): New function.
(create_outfile): Use it.
(install_signal_handlers, abort_gzip_signal): Assume sigaction.
(remove_output_file): New arg SIGNALS_ALREADY_BLOCKED.
All uses changed. Avoid unnecessary (and racy) call
to sigprocmask if this new arg is set.
(abort_gzip_signal): Assume C89 or better for signal handler type.
* gzip.h (RETSIGTYPE): Remove.
* lib/.gitignore, m4/.gitignore:
Add files brought in by Gnulib sigaction module. Sort.
2018-08-04 Paul Eggert <eggert@cs.ucla.edu>
gzip: port better to mingw again
Problem reported by Bdale Garbee (Bug#32305#8).
* gzip.c (do_chown): Use HAVE_FCHOWN || HAVE_CHOWN,
which is configured, instead of DO_CHOWN, which is not.
2018-08-02 Paul Eggert <eggert@cs.ucla.edu>
gzip: make the output more reproducible
Problem reported by Bernhard M. Wiedemann (Bug#32342).
* NEWS: Mention this.
* doc/gzip.texi (Overview, Invoking gzip): Document this.
* gzip.c (get_input_size_and_time): New function,
which implements the change.
(treat_stdin, treat_file): Use it.
* tests/reproducible: New test.
* tests/Makefile.am (TESTS): Add it.
2018-07-29 Paul Eggert <eggert@cs.ucla.edu>
gzip: port better to mingw
Problem reported by Bdale Garbee for Debian
* gzip.c (do_chown): Don't assume uid_t and gid_t.
2018-07-01 Jim Meyering <meyering@fb.com>
maint: update gnulib to latest; also update bootstrap and init.sh
2018-06-30 Jim Meyering <meyering@fb.com>
build: remove -Wformat-truncation=2 to avoid avoid false-positive
* configure.ac (GNULIB_WARN_CFLAGS): Add -Wformat-truncation=2,
to disable it when building gnulib with --enable-gcc-warnings.
This avoids what looks like a false positive from GCC 9:
strerror_r.c: In function 'rpl_strerror_r':
strerror_r.c:453:35: error: 'Unknown error ' directive output \
truncated writing 14 bytes into a region of size 2 \
[-Werror=format-truncation=]
snprintf (buf, buflen, "Unknown error %d", errnum);
~~^~~~~~~~~~~~
In file included from /usr/include/stdio.h:862,
from ./stdio.h:43,
from strerror_r.c:29:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' \
output between 16 and 26 bytes into a destination of size 2
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
2018-01-15 Paul Eggert <eggert@cs.ucla.edu>
misc: update --version copyright
* gunzip.in, gzexe.in, gzip.c, zcat.in, zdiff.in, zforce.in, zgrep.in:
* zless.in, zmore.in, znew.in:
Update copyright year in --version output to 2018.
This part of the year-number update isn’t automated yet.
2018-01-07 Jim Meyering <meyering@fb.com>
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.9
* NEWS: Record release date.
2018-01-06 Paul Eggert <eggert@cs.ucla.edu>
gzexe: port to macOS mktemp
Problem reported by Jeffrey Walton (Bug#30000).
* gzexe.in, zdiff.in, zgrep.in:
Don’t assume that mktemp works when given no arguments,
as this is not true for macOS. Instead, use a syntax
that should work with coreutils, NetBSD, and macOS.
While we’re in the neighborhood, be more consistent about how program
names are used in temporary file names. Also, watch out for TMPDIR
values that are not absolute file names, since they can cause problems
(e.g., leading "-").
2018-01-03 Jim Meyering <meyering@fb.com>
maint: update gnulib and copyright dates for 2018
* gnulib: Update to latest.
* bootstrap: Update from gnulib.
* all files: Run "make update-copyright".
2017-12-16 Jim Meyering <meyering@fb.com>
build: update gnulib to latest
2017-11-24 Paul Eggert <eggert@cs.ucla.edu>
maint: zforce and zmore exit status cleanup
Problem reported by Nelson H. F. Beebe.
* zforce.in, zmore.in: On failure, exit with status 1 instead of
with whatever failing status that printf or mv exited with.
2017-11-23 Paul Eggert <eggert@cs.ucla.edu>
gzexe: ensure file always exists
* gzexe.in: When in a filesystem that does not support symlinks,
use rm+cp rather than mv to make backups, so that the argument
file always exists.
2017-11-23 Jim Meyering <meyering@fb.com>
build: update gnulib to latest
2017-11-16 Jim Meyering <meyering@fb.com>
gzexe: work even without the ability to make a hard link
* gzexe.in: When ln -f fails to create a "~"-style backup,
fall back to using mv -f.
Reported by Bruno Haible in http://debbugs.gnu.org/29266
2017-11-15 Jim Meyering <meyering@fb.com>
build: make each generated script unwritable
* Makefile.am (.in): Ensure that each generated script is unwritable.
This makes it less likely that someone (even me) will mistakenly
modify one of those generated files.
2017-11-13 Jim Meyering <meyering@fb.com>
zless, znew: exit 1 upon --help or --version write failure
* zless.in: Exit 1 upon --help or --version write error.
* znew.in: Likewise.
2017-11-12 Paul Eggert <eggert@cs.ucla.edu>
maint: script diagnostics status cleanup
Problem reported by Bruno Haible (Bug#29266#20).
* NEWS: Mention this.
* gunzip.in, gzexe.in, zcat.in, zcmp.in, zdiff.in, zforce.in:
* zgrep.in, zless.in, zmore.in, znew.in:
Use printf instead of echo if the argument might contain ‘\’, at
least in theory. Don’t assume printf exits with status 1 on
failure; it might be some other positive status.
* gzexe.in: Use printf consistently instead of echo, and
proscribe it instead of echo.
tests: don’t be so strict about timestamps
* tests/timestamp: We’ve had many false alarms about timestamps
that are not gzip problems, but instead are problems with ‘touch’.
Attempt to work around them by not trusting ‘touch’ so much.
Problems and parts of solutions proposed by Bruno Haible.
2017-11-10 Paul Eggert <eggert@cs.ucla.edu>
build: update gnulib submodule to latest
2017-11-09 Jim Meyering <meyering@fb.com>
gnulib: update to latest
maint: use noreturn, not ATTRIBUTE_NORETURN
Use gnulib's stdnoreturn module so we can include
<stdnoreturn.h> and the "noreturn" helper macro, thus
replacing the definition and uses of ATTRIBUTE_NORETURN.
* bootstrap.conf (gnulib_modules): Add stdnoreturn.
* gzip.h (ATTRIBUTE_NORETURN): Remove definition.
Include stdnoreturn.h and use "noreturn" for each
ATTRIBUTE_NORETURN-adorned function declaration.
* gzip.c (do_exit, try_help): Use "noreturn".
tests: unpack-invalid: correct and clean up a test
* tests/unpack-invalid: There was a logic error that would have
caused this test to ignore a failure if first iteration of the
loop set fail=1 and the second one reset it to 0. Also, use
"returns_ 1 ...", to require an exit status of 1.
2017-11-07 Paul Eggert <eggert@cs.ucla.edu>
gzip: diagnose out-of-range MTIME
This seems to be the problem reported by Bruno Haible for GNU/Hurd
i386 with touch 8.26 and glibc 2.24 (Bug#29033#20).
* NEWS: Document this.
* gzip.c (get_method): If MTIME is out of range for
this platform, warn and substitute the nearest in-range
value, instead of silently ignoring it.
(do_list): Remove no-longer-needed test for unknown time stamp.
2017-11-06 Paul Eggert <eggert@cs.ucla.edu>
misc: diagnose year-2038 configuration problems
* bootstrap.conf (gnulib_modules): Add year2038.
* m4/.gitignore: Add year2038.m4[
maint: remove IMPORT_FROM_GETTEXT
* bootstrap.conf (IMPORT_FROM_GETTEXT): Remove.
This is a relic from older Gnulib, and has no effect now.
2017-10-29 Jim Meyering <meyering@fb.com>
tests/unpack-valid: port to printf that do not grok hex
Many versions of printf do not handle hexadecimal in a format string,
so this test would fail.
* tests/init.cfg (hex_printf_): Copied from grep's tests/init.cfg.
* tests/unpack-valid: Use hex_printf_.
Reported by Bruno Haible in https://bugs.gnu.org/29033#26
gnulib: update to latest; also update tests/init.sh from gnulib
gzip: fix bug with any upper case custom ('-S'-specified) suffix
Any user-specified suffix with an upper case
letter would fail to match desired file.
* gzip.c (get_suffix): First, arrange to have only one return
point rather than two. Put a lower-cased (just-malloc'd) copy
of z_suffix in the suffix vector, and free it before returning.
* tests/upper-suffix: New file.
* tests/Makefile.am (TESTS): Add it.
* NEWS: Mention it.
Reported by meo@xenialab.it in https://bugs.gnu.org/29006
2017-10-16 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix bug in unpack EOB check
Problem reported by Vidar Holen (Bug#28861).
* NEWS: Mention fix.
* tests/unpack-valid: New test.
* tests/Makefile.am (TESTS): Add it.
* unpack.c (build_tree): Report an error if Huffman tree has
too few leaves.
* unpack.c (unpack): Fix check for EOB.
Remove now-unnecessary check for code out of range.
2017-09-19 Jim Meyering <meyering@fb.com>
maint: fix "make syntax-check": remove useless HAVE_UTIME_H definitions
* tailor.h: Don't define HAVE_UTIME_H.
maint: avoid "make syntax-check" failure due to old-NEWS modification
* cfg.mk (old_NEWS_hash): Update, to reflect recent NEWS correction.
2017-09-19 Paul Eggert <eggert@cs.ucla.edu>
gzexe: improve usage diagnostic
* gzexe.in (usage): Reword for clarity (Bug#28514).
misc: update --version copyright
* gunzip.in, gzexe.in, gzip.c, zcat.in, zdiff.in, zforce.in, zgrep.in:
* zless.in, zmore.in, znew.in: Update copyright year in --version
output to 2017.
maint: prefer HTTPS to HTTP, FTP in URLs
maint: copy bootstrap from Gnulib
maint: port to GCC 7.2
* configure.ac (WERROR_CFLAGS): Avoid -Wduplicated-branches.
* tailor.h (FALLTHROUGH): New macro, taken from Emacs.
* gzip.c (main): Use it.
maint: update .gitignore for recent Gnulib
build: update gnulib submodule to latest
2017-05-07 Jim Meyering <meyering@fb.com>
maint: also distribute a zip-compressed tarball
* configure.ac (AM_INIT_AUTOMAKE): Add dist-zip, for
those lacking gzip, 7zip, etc. Suggested by Karl Berry in
https://bugs.gnu.org/25538.
2017-03-13 Paul Eggert <eggert@cs.ucla.edu>
gzip: port zdiff, zless to Busybox
Problem reported by Denys Zagorui (Bug#26088).
* tests/zdiff: Check that diff uses POSIX-format output.
* zless.in (less_version): Don't exit merely because 'less -V'
fails; instead, assume 'less' is compatible with an old version of
the original 'less'. Busybox 'less -V' fails, but apparently its
'less' works anyway somehow.
2017-02-06 Jim Meyering <meyering@fb.com>
tests: avoid failure when running with no tty
* tests/help-version (zcat_setup): Export TERM=dumb, to avoid zless
malfunction. Reported by Assaf Gordon in https://bugs.gnu.org/25636#8
gnulib: update to latest; and tests/init.sh and bootstrap
maint: change "time stamp" to "timestamp" globally
This avoids a new syntax-check failure.
* ChangeLog-2007: Perform that change.
* NEWS: Likewise.
* algorithm.doc: Likewise.
* doc/gzip.texi: Likewise.
* gunzip.in: Likewise.
* gzip.1: Likewise.
* gzip.c: Likewise.
* gzip.h: Likewise.
* m4/.gitignore: Likewise.
* sample/ztouch: Likewise.
* tests/timestamp: Likewise.
* unzip.c: Likewise.
* zip.c: Likewise.
* znew.1: Likewise.
* cfg.mk: Update the old news hash accordingly.
2017-01-01 Jim Meyering <meyering@fb.com>
maint: tweak a distcheck rule
* dist-check.mk (my-distcheck): Don't use --disable-nls.
That option is now unrecognized.
maint: update gnulib and copyright dates for 2017
* gnulib: Update to latest.
* all files: Run "make update-copyright".
2016-11-08 Jim Meyering <meyering@fb.com>
maint: use "returns_" rather than explicit comparison with "$?"
* tests/zdiff: Use "returns_ 1" rather than testing $? = 1.
* tests/hufts: Likewise.
* tests/timestamp: Likewise, but s/1/2/.
2016-11-04 Paul Eggert <eggert@cs.ucla.edu>
gzip: minor time stamp cleanups
* NEWS: Document this.
* gzip.c (get_method): Do not warn about MTIME out of range.
This should avoid useless chatter on hosts with 32-bit time_t
after the year 2038 (!).
(do_list): Do not pass junk time stamp to localtime.
(copy_stat): Do not report "time stamp restored" if restoration
fails.
gzip: --no-time cleanup
Problem reported by Jim Meyering (Bug#24826).
* gzip.c (longopts): Remove non-working no-time entry.
(help) [UNDOCUMENTED]: Don't document it.
gzip --no-name: avoid spurious warning
Problem reported by Jim Meyering (Bug#24826).
* tests/timestamp: Add a test from Jim Meyering to exercise the fix
* zip.c (zip): Treat unknown time stamps as 0.
2016-10-24 Jim Meyering <meyering@fb.com>
maint: update .gitignore files to ignore more generated files
2016-10-02 Jim Meyering <meyering@fb.com>
maint: avoid unwarranted "make syntax-check" failure
* tests/timestamp: Reorder "rm" arguments so the doubled-word
syntax-check rule does not detect a false positive "in in" here.
gnulib: update to latest
2016-09-07 Paul Eggert <eggert@cs.ucla.edu>
* doc/gzip.texi: Fix off-by-one timestamp.
2016-09-06 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix some Y2038 etc. bugs
* NEWS: Document this.
* gzip.c (get_method): Warn about out-of-range MTIME,
and ignore it instead of relying on possibly-undefined behavior.
* tests/Makefile.am (TESTS): Add timestamp.
* tests/timestamp: New test.
* zip.c (zip): Warn about out-of-range file time stamp.
2016-08-29 Jim Meyering <meyering@fb.com>
maint: fix gzip-specific syntax-check rule
* cfg.mk (sc_gzip_copyright_check): This rule had two problems.
It was failing erroneously (the copyright date in gzip.c is fine),
yet it was complaining. The first problem is that the rule's
diagnostic mentioned the wrong file: lib/version-etc.c, rather than
./gzip.c. The second problem is that it specified this file name
via "in_files" rather than the "in_vc_files" variable.
2016-06-12 Paul Eggert <eggert@penguin.cs.ucla.edu>
gzip: fix port to Atari by not defining ASMV
Problem reported by Helmut Karlowski in: http://bugs.gnu.org/23751
* tailor.h (ASMV) [ATARI || atarist]: Do not define.
2016-06-12 Paul Eggert <eggert@cs.ucla.edu>
gzip: drop mentions of Amiga, VMS
These platforms were not supported anyway, and their code was
suffering from bitrot. This patch may also fix some file name
glitches on MS-Windowsish platforms.
* bootstrap.conf (gnulib_modules): Add dosname.
* gzip.c: Include dosname.h.
(shorten_name, treat_dir): Use last_component rather than looking
at path separators by hand.
* tailor.h: Remove sections on porting to VMS and to Amiga,
since dosname.h doesn't support these platforms anyway.
(PATH_SEP2, PATH_SEP3, STDC_HEADERS, SUFFIX_SEP, RECORD_IO)
(HAVE_CHOWN, HAVE_LSTAT, HAVE_SYS_DIR_H, direct): Remove. All
uses removed. Many uses replaced by calls to ISSLASH and/or
last_component.
2016-04-29 Jim Meyering <meyering@fb.com>
maint: arrange for better URLs in generated announcement message
* cfg.mk (url_dir_list): Define. I had been correcting the generated
URLs by hand, just before the announcement. This is better.
2016-04-26 Jim Meyering <meyering@fb.com>
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.8
* NEWS: Record release date.
gnulib: update to latest
2016-04-19 Paul Eggert <eggert@cs.ucla.edu>
gzip: simplify by closing ourselves
This simplifies the previous fix, by avoiding the use of the
closein module. That module was problematic, as gzip normally
does not use stdio for output and never uses it for input.
Also, it is a heavyweight module, as it drags many files into lib
(c-ctype.c, c-ctype.h, closein.c, closein.h, closeout.c, closeout.h,
close-stream.c, close-stream.h, config.charset, c-strcasecmp.c,
c-strcaseeq.h, c-strcase.h, c-strncasecmp.c, fpending.c, fpending.h,
freadahead.c, freadahead.h, localcharset.c, localcharset.h, mbrtowc.c,
mbsinit.c, quotearg.c, quotearg.h, quote.h, ref-add.sin, ref-del.sin,
streq.h, wctype-h.c, wctype.in.h) and into m4 (closein.m4, closeout.m4,
close-stream.m4, codeset.m4, configmake.m4, fpending.m4, freadahead.m4,
glibc21.m4, localcharset.m4, locale-fr.m4, locale-ja.m4, locale-zh.m4,
mbrtowc.m4, mbsinit.m4, mbstate_t.m4, quotearg.m4, wctype_h.m4),
and these files are thus no longer needed.
* bootstrap.conf (gnulib_modules): Remove closein.
* gzip.c: Don't include closein.h.
(stdin_was_read): New static var.
(main): Don't use close_stdin.
Invoke finish_out to exit after outputting via stdio's stdout.
Close stdin after reading it.
Restore previous way of closing stdout.
(treat_stdin): Record that stdin was read.
(finish_out): New function.
gzip: fix bug with -l output to pipes
Problem reported by Christian Franke via Eric Blake in:
http://bugs.gnu.org/23314
* NEWS: Mention this.
* gzip.c (main): Do not close stdout twice when given -l.
Instead, -l now just fflushes stdout, so that fdatasync
can synchronize it if --synchronize is also specified.
* tests/list: New test case.
* tests/Makefile.am (TESTS): Add it.
2016-03-28 Paul Eggert <eggert@cs.ucla.edu>
Port to Oracle Solaris Studio 12.4
Problem reported by Kiyoshi KANAZAWA in: http://bugs.gnu.org/23133
* NEWS: Document this.
* configure.ac (ASMV): Do not define if NO_ASM is
anywhere in DEFS; it doesn't need to be surrounded by white space.
* lib/match.c: Do not use x86 version if __x86_64__ is defined.
2016-03-27 Jim Meyering <meyering@fb.com>
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.7
* NEWS: Record release date.
2016-03-26 Paul Eggert <eggert@cs.ucla.edu>
Port to NetBSD 7.0
Problem reported by Assaf Gordon in: http://bugs.gnu.org/23107#13
* gzexe.in, zdiff.in, zgrep.in: Don't rely on mktemp -t,
as it has a different meaning in NetBSD.
* tests/init.sh: Sync from Gnulib.
Port to Alpine Linux which uses Busybox
* Makefile.am (check-local): Use plain diff rather than
2016-03-24 Jim Meyering <meyering@fb.com>
gzip: also honor GZIP=--rsyncable
* gzip.c (main): Also accept --rsyncable when it is specified
via the GZIP environment variable.
I noticed this when gzip's "make dist" failed because maint.mk
detected that gzip now honors --rsyncable, yet when it set GZIP_ENV
to include that, and that propagated via automake-generated code
to the GZIP setting used in the "make dist" rule, there, it was not
honored, and caused "make dist" to fail.
2016-03-21 Paul Eggert <eggert@cs.ucla.edu>
Fix typo in previous patch
Port to Solaris 11 /bin/sh
* m4/shell.m4 (AC_PROG_SHELL): Reject Solaris 11 /bin/sh.
A problem was reported by Nelson H. F. Beebe for OpenIndiana.
I reproduced a problem with different symptoms on Solaris 11.
Switching to Bash fixed it, and I hope this fixes it for
OpenIndiana too, since both problems appear to be shell-related.
2016-03-18 Paul Eggert <eggert@cs.ucla.edu>
zgrep: with -f SPECIAL, read SPECIAL just once
Problem reported by Fulvio Scapin in: http://bugs.gnu.org/22945
* NEWS: Document this.
* tests/zgrep-f: Add a test.
Adjust a test to cover the case of more than one line in -f's input.
* zgrep.in (with_filename): With -f FILE, if FILE is stdin or not
a regular file, copy it into a temporary and use the temporary.
2016-03-15 Paul Eggert <eggert@cs.ucla.edu>
gzip: port to AIX 7.1 + xlc V12.1
* inflate.c, unlzw.c, util.c: Include tailor.h after including any
system include file that might in turn include signal.h for the
first time, so that SIGPIPE is not #defined to 0 prematurely,
which clashes with signal.h's SIGPIPE.
2016-03-15 Jim Meyering <meyering@fb.com>
gnulib: update to latest
maint: don't ignore gitlog-to-changelog failure
* Makefile.am (gen-ChangeLog): Don't ignore failure of
gitlog-to-changelog. This syncs to coreutils' copy of this rule.
2016-03-06 Paul Eggert <eggert@cs.ucla.edu>
gzip: pacify clang
* gzip.c (do_list): Use 2D array of char for month abbreviations,
as this is clearer anyway, and it pacifies Clang. Problem reported
by Assaf Gordon in: http://bugs.gnu.org/22900#40
2016-03-06 Jim Meyering <meyering@fb.com>
tests: port to systems for which ":" is not the PATH separator
* Makefile.am (new_path): New variable.
(check-local): Use $(PATH_SEPARATOR) rather than a literal ":",
to avoid "make syntax-check" failure.
2016-03-06 Paul Eggert <eggert@cs.ucla.edu>
doc: minor --rsyncable doc fixes
* doc/gzip.texi (Sample): Mention --rsyncable.
* gzip.c (help): Sort and do not capitalize the new --rsyncable
help string.
gzip: minor zgrep cleanup
* zgrep.in: Simplify previous change.
gzip: port zgrep to Solaris 11.2
Problem reported by Assaf Gordon in: http://bugs.gnu.org/22900#11
* zgrep.in: Port to Solaris 11.2 /bin/sh (ksh 93u 2011-02-08),
where $? is 256+SIG when a process was killed with signal SIG, and
where 'exit 257' is equivalent to 'exit 1'. Apparently some other
sh implementations use 256+128+SIG. So, instead of using plain
'exit $?', use the equivalent of 'exit ((128 * (128 <= $?)) + $? %
128)' within the script, and use the equivalent of 'kill -$($? %
128)' at the top level if the exit status is 128 or more.
gzip: remove --__bindir
* NEWS: Document this.
* gzexe.in, gunzip.in, zcat.in, zcmp.in, zdiff.in, zegrep.in:
* zfgrep.in, zforce.in, zgrep.in, zless.in, zmore.in, znew.in:
Remove support for undocumented --__bindir option. Callers can
set PATH instead; that's less error-prone. This fixes some
'make check' failures on my Solaris 11 box, which occurred
because the test scripts were mistakenly testing the installed
gzip rather than the gzip in the working directory.
* Makefile.am (.in): Don't replace bindir.
(check-local): Set PATH instead of using --__bindir.
* tests/help-version (gunzip_setuphelp, gzexe_setuphelp)
(zcat_setuphelp, zcmp_setuphelp, zdiff_setuphelp)
(zegrep_setuphelp, zfgrep_setuphelp, zforce_setuphelp)
(zgrep_setuphelp, zless_setuphelp, zmore_setuphelp)
(znew_setuphelp): Remove. All uses removed.
(lbracket_setup): Default args to empty.
2016-03-04 Jim Meyering <meyering@fb.com>
tests: fix "make check" failure on AIX 7.1
* tests/Makefile.am (TESTS_ENVIRONMENT): Modernize:
remove unused shell_or_perl_ function, and use an
export_with_values function as grep does, to remove
a lot of duplication.
Reported by Assaf Gordon in http://debbugs.gnu.org/22900
2016-03-02 Rusty Russell <rusty@rustcorp.com.au>
gzip: support the --rsyncable option
* deflate.c: Include verify.h.
(RSYNC_WIN, RSYNC_SUM_MATCH): Define.
(rsync_sum, rsync_chunk_end): Declare file-scoped globals.
(lm_init): Initialize globals.
(fill_window): Update rsync_chunk_end.
(rsync_roll): New function.
(RSYNC_ROLL): New macro.
(FLUSH_BLOCK): Update for new "pad" parameter.
(deflate_fast): Use RSYNC_ROLL and flush/pad.
(deflate): Likewise.
* trees.c (flush_block): Add "pad" parameter.
* gzip.c (rsync): New global.
(RSYNCABLE_OPTION, longopts, help): Add the option.
(main): Set the new global.
* gzip.h (rsync): Declare new global.
(flush_block): Update prototype.
* doc/gzip.texi: Document it.
* gzip.1: Likewise.
* bootstrap.conf: Use verify module.
* NEWS (New feature): Mention it.
* Makefile.am (check-local): Add tests and use AM_V__* command-
hiding opions. Reported against Debian here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=118118
2016-02-28 Jim Meyering <meyering@fb.com>
maint: dist-check.mk: remove .deps dirs before comparing
"make distcheck" with automake-from-trunk would fail like this:
...
Only in /gz/tests/torture/gzip/test/gzip-1.6.42-9d47.old: .deps
Only in /gz/tests/torture/gzip/test/gzip-1.6.42-9d47.old/lib: .deps
Only in /gz/tests/torture/gzip/test/gzip-1.6.42-9d47.old/lib/glthread: .deps
* dist-check.mk (my-distcheck): Remove all .deps directories before
comparing the two hierarchies.
2016-02-28 Paul Eggert <eggert@cs.ucla.edu>
misc: update --version copyright
* gunzip.in, gzexe.in, zcat.in, zdiff.in, zforce.in, zgrep.in:
* zless.in, zmore.in, znew.in: Update copyright year in --version
output to 2016.
gzip: new option --synchronous
This follows up on the earlier patch to avoid data loss near the
system crashes. It makes the new behavior optional, with the
default off. See: http://bugs.gnu.org/22768
* NEWS, doc/gzip.texi (Sample, Invoking gzip), gunzip.in (usage):
* gzip.1, zcat.in (usage):
Document this.
* gzip.c (synchronous): New static var.
(SYNCHRONOUS_OPTION): New constant.
(longopts, help, main, treat_file): Add support for --synchronous.
gzip: use constants, not fileno
* gzip.c (main, treat_stdin, treat_file, get_method)
(check_ofname): Prefer STDIN_FILENO to fileno (stdin),
and similarly for STDOUT_FILENO.
gzip: fdatasync output dir before unlinking
This follows up on the earlier patch to avoid data loss near
the system crashes. See: http://bugs.gnu.org/22768
* bootstrap.conf (gnulib_modules): Add dirname-lgpl, fdatasync,
openat-safer, unistd-safer, unlinkat.
* gzip.c: Include stddef.h, dirname.h.
Include fcntl--.h instead of fcntl-safer.h.
(RW_USER): Remove; no longer needed.
(dfname, dfd): New static vars.
(dot): New static const.
(atdir_eq, atdir_set): New functions.
(treat_file): Also fdatasync the output directory, if !keep.
(treat_file, create_outfile, open_and_stat):
Use dir fd for unlinkat and openat, if possible.
(open_and_stat): Omit mode argument, since it was always the
same. All callers changed.
* lib/.gitignore, m4/.gitignore: Add new gnulib files.
* tailor.h (PROTO, NO_STDIN_FSTAT, OPEN): Remove. Remove MACOS
section, as this stuff would not work anyway now, and circa 2001
Apple stopped supporting Mac OS 9 and earlier.
* zip.c: Do not include unistd.h and fcntl.h, as this file does
not directly use any symbols defined by those headers.
2016-02-22 Paul Eggert <eggert@cs.ucla.edu>
fsync output file before closing
Problem reported by Yanyan Jiang 蒋炎岩 in: http://bugs.gnu.org/22768
* NEWS: Document this.
* bootstrap.conf (gnulib_modules): Add fsync.
* gzip.c (treat_file): Call fsync just before closing the output.
* lib/.gitignore, m4/.gitignore: Add fsync-related gnulib files.
2016-01-22 Jason Leschnik <jason@leschnik.me>
doc: correct a diagnostic in man page to match actual
* gzip.1: s/no change/unchanged/
This addresses http://debbugs.gnu.org/22413
2016-01-01 Jim Meyering <meyering@fb.com>
maint: update copyright year, bootstrap, init.sh
Run "make update-copyright" and then...
* gzip.c: Transform the copyright notice via s/2015/2016/.
* gnulib: Update to latest.
* tests/init.sh: Update from gnulib.
* bootstrap: Likewise.
2015-11-01 Jim Meyering <meyering@fb.com>
maint: avoid three warnings from the very latest gcc-built-from-git
* unzip.c (unzip): Correct two format strings to match the types of the corresponding arguments.
* unlzw.c (unlzw): Cast an "int" to unsigned to match expected type of %x.
2015-08-24 Jim Meyering <meyering@fb.com>
maint: adjust copyright notices in *.in files to be consistent
The copyright year ranges in *.in files were not being updated,
because of a missing ", Inc." suffix. Add that, run
run "make udpate-copyright", and ensure 2010..2015 year
ranges are covered.
* gunzip.in: Update copyright notice and year ranges.
* gzexe.in: Likewise.
* zcat.in: Likewise.
* zdiff.in: Likewise.
* zforce.in: Likewise.
* zgrep.in: Likewise.
* zless.in: Likewise.
* zmore.in: Likewise.
* znew.in: Likewise.
2015-08-24 Jim Meyering <meyering@fb.com>
build: avoid -Wshift-negative-value warning
Configured with --enable-gcc-warnings, a gcc-6.x build would fail with this:
gzip.c:118:32: error: left shift of negative value
#define OFF_T_MIN (~ (off_t) 0 << (sizeof (off_t) * CHAR_BIT - 1))
* gzip.c [OFF_T_MAX]: Define in terms of TYPE_MAXIMUM, not OFF_T_MIN.
[OFF_T_MIN]: Remove now-unused definition.
Include "intprops.h" for definiton of TYPE_MAXIMUM.
* bootstrap.conf (gnulib_modules): Add intprops.
2015-07-30 Jim Meyering <meyering@fb.com>
maint: remove dead code
This package has not been compilable with -DCRYPT
since commit v1.4-82-g9d1b943. Remove final vestiges.
* bits.c (copy_block) [CRYPT]: Remove #ifdef'd code.
* inflate.c (NEXTBYTE) [CRYPT]: Likewise.
Prompted by a report from Flávio Medeiros
that HEADER and T might be used uninitialized.
2015-03-17 Paul Eggert <eggert@cs.ucla.edu>
gzip: make the GZIP env var obsolescent
* NEWS, gzip.1:
* doc/gzip.texi (Environment, Tapes): Document this.
* gzip.c (args): Remove static var; no longer needed now that
'main' frees it. All uses removed.
(ENV_OPTION, shortopts): New constants.
(main): Warn about nontrivial uses of GZIP. Reject dangerous uses.
* tests/gzip-env: New test case.
* tests/Makefile.am (TESTS): Add it.
* util.c (add_envopt): Create new vector instead of adding to old
one. Only use changed.
2015-03-13 Paul Eggert <eggert@cs.ucla.edu>
maint: adjust to recent gnulib
* doc/.gitignore: Add gendocs_template_min.
* lib/.gitignore: Add assure.h.
2015-02-08 Jim Meyering <meyering@fb.com>
maint: ensure that --version's copyright date is current
* cfg.mk (sc_gzip_copyright_check): Ensure we keep this copyright
year number up to date. Reported by Paul Eggert.
* gzip.c (license_msg): Include only the current year number,
as is done in nearly every other program.
gnulib: update to latest
2015-01-01 Jim Meyering <meyering@fb.com>
maint: update copyright year ranges to include 2015; update gnulib
2014-11-10 Jim Meyering <meyering@fb.com>
maint: move new NEWS entry into block for upcoming release
* NEWS: Move the latest NEWS entry from the block for gzip-1.6
into the block for the upcoming release.
2014-11-10 Paul Eggert <eggert@cs.ucla.edu>
gzip: adjust -v output when -k is also specified
Problem reported by Eric Benoit in: http://bugs.gnu.org/16401
* gzip.c (treat_file): When keeping a file, don't say it's replaced.
* NEWS: Document this.
* tests/keep: Test this.
2014-11-10 Jim Meyering <meyering@fb.com>
maint: enable more syntax checks
* cfg.mk (local-checks-to-skip): Remove several rule names from this
list, thus enabling the corresponding checks. To fix some, I made
syntactic changes to source files. In other cases, I exempted certain
files from the checks.
Add exemptions for these:
sc_prohibit_atoi_atof = ^(gzip|sample/sub)\.c$$
sc_space_tab = ^lib/match\.c$$
sc_useless_cpp_parens = ^(lib/match\.c|tailor\.h)$$
* configure.ac: Add quotes to fix under-quoting.
* deflate.c: Remove unnecessary cpp parentheses.
* tests/Makefile.am (TEST_ENVIRONMENT): Remove space-before-TAB.
* unlzw.c: Change some TABs to spaces.
maint: avoid false positive match in check for double semicolon
* cfg.mk (exclude_file_name_regexp--sc_prohibit_double_semicolon):
Exempt the file, lib/match.c, from gnulib's new double-semicolon
check.
gnulib+bootstrap: update to latest
* gnulib: Update the submodule.
* bootstrap: Update from gnulib.
2014-10-10 Paul Eggert <eggert@cs.ucla.edu>
tests: use local dir for output
Reported by Kiyoshi KANAZAWA in: http://bugs.gnu.org/18679
* tests/unpack-invalid: Use local directory, not /tmp, for output.
2014-08-10 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix --suffix=z bug (Bug#18239)
* gzip.c (get_suffix): Put --suffix string at the end
of the list of suffixes if it is a suffix of one one them.
* tests/z-suffix: New file.
* tests/Makefile.am (TESTS): Add it.
2014-06-12 Paul Eggert <eggert@cs.ucla.edu>
zgrep: exit with status 0 if a file matches and there's no trouble
Reported by Pavel Raiskup in: http://bugs.gnu.org/17760
* zgrep.in (res): Treat exit status 0 to be greater than 1.
Also, exit immediately on software configuration error.
2014-06-07 Paul Eggert <eggert@cs.ucla.edu>
doc: use UTF-8 in the manual
* doc/gzip.texi: Switch to UTF-8 encoding. Fix ASCIIisms.
Don't use @sc; plain caps are fine for GNU manuals.
maint: update .gitignore files
* lib/.gitignore, m4/.gitignore: Adjust to match current sources.
Also, sort.
2014-06-07 Jim Meyering <meyering@fb.com>
maint: udpate all copyright notices via "make update-copyright"
maint: update copyright year range in gzip.texi
* doc/gzip.texi: Update copyright date.
maint: update gnulib to latest and adapt streamsavedir usage
* gnulib: Update module to latest.
* gzip.c (treat_dir): Gnulib's streamsavedir API has changed:
call it with a new argument, SAVEDIR_SORT_NONE, to retain the
preceding behavior.
2014-03-06 Paul Eggert <eggert@cs.ucla.edu>
zless: improve gzip failure checking, and port to new -V format
Problem reported by Jaroslaw Weglinski, and LESSOPEN change
suggested by Mark Nudelman, in: http://bugs.gnu.org/16951
This doesn't fix bug 16951 entirely, as 'less' needs to be changed
too, but it's a start.
* zless.in (check_exit_status): New var.
(LESSOPEN): Use it.
(use_input_pipe_on_stdin): Adjust to output format on Fedora 20,
where 'less -V' outputs "less 458 (POSIX regular expressions)"
on the first line.
2013-10-24 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix permissions issue on Solaris-like systems
I.e., on systems that let users give files away.
* gzip.c (do_chown): New function.
(copy_stat): Use it, to change the group, then the permissions,
then the owner. Idea suggested by Vladimir Marek in
<http://bugs.gnu.org/15672#11>
2013-10-03 Paul Eggert <eggert@cs.ucla.edu>
znew: avoid denial-of-service issue
Reported by Rich Burridge in <http://bugs.gnu.org/15522>.
* znew.in: Rewrite to avoid the need for a temporary file in /tmp.
That way, we avoid the need for set -C
and worrying about denial of service.
Use touch -r and chmod --reference rather than cpmod.
Assume cp -p works, as it's now universal.
Quote 'echo' args better, while we're at it.
(warn, tmp, cpmod, cpmodarg): Remove.
(GZIP): Unset, so that we needn't test for gzip extension.
(ext): Now always '.gz'.
* znew.1: Document the change of implementation assumptions.
2013-06-19 Paul Eggert <eggert@cs.ucla.edu>
Fix spelling typo in newly-added comment.
tests: zgrep-signal race condition fix
* tests/zgrep-signal: Check that Perl supports dup2.
(exec_with_SIGPIPE_SIGDFL): Remove.
(write_to_dangling_pipe): Simplify by moving more of it into Perl.
Fix race condition, where subcommand writes to a pipe before the ":"
command exits. Problem reported by Thorsten Glaser in
<http://lists.gnu.org/archive/html/bug-gzip/2013-06/msg00028.html>.
2013-06-12 Paul Eggert <eggert@cs.ucla.edu>
zgrep: usage should say which grep options are not supported
* zgrep.in (usage): Document which grep options are not supported.
Problem reported by Liron Paryente in
<http://lists.gnu.org/archive/html/bug-grep/2013-06/msg00005.html>.
2013-06-11 Paul Eggert <eggert@cs.ucla.edu>
gzip: port util.c to Compaq C V6.5-303
* util.c (crc_32_tab): Move definition to front, since this
compiler doesn't allow declarations of static arrays with
incomplete types. Problem reported by Steven M. Schweda in
<http://lists.gnu.org/archive/html/bug-gzip/2013-06/msg00010.html>.
tests: zgrep-context assumes grep knows context
* tests/Makefile.am (TESTS_ENVIRONMENT): Pass GREP too.
* tests/zgrep-context: Check that the underlying grep supports
context options. Problem reported by Steven M. Schweda in
<http://lists.gnu.org/archive/html/bug-gzip/2013-06/msg00010.html>.
doc: zgrep exit status, unsupported options
* zgrep.1 (EXIT STATUS, BUGS): New sections.
Problem reported by Bdale Garbee in
<http://lists.gnu.org/archive/html/bug-gzip/2013-06/msg00007.html>.
maint: port to platforms lacking SIGPIPE
* tailor.h (SIGPIPE): Define to 0 if not defined. This fixes a
porting bug introduced as part of 2012-11-16 syntax-check cleanup.
Problem reported by Bdale Garbee in
<http://lists.gnu.org/archive/html/bug-gzip/2013-06/msg00006.html>.
2013-06-09 Jim Meyering <meyering@fb.com>
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.6
* NEWS: Record release date.
build: avoid automake warning that suggests use of subdir-objects
* configure.ac (AM_INIT_AUTOMAKE): Use the subdir-objects option.
build: avoid warning about deprecated use of automake's ACLOCAL_AMFLAGS
* Makefile.am (ACLOCAL_AMFLAGS): Don't use this deprecated variable.
* configure.ac: Do this instead: AC_CONFIG_MACRO_DIR([m4]).
build: use more portable shell syntax in search of working shell
* m4/shell.m4: Adjust sh/case syntax not to evoke a syntax
error from Solaris 10's /bin/sh.
build: update gnulib to latest, and bootstrap
2013-05-28 Jim Meyering <meyering@fb.com>
tests: exercise the new --keep option
* tests/keep: New file.
* tests/Makefile.am (TESTS): Add it.
2013-05-28 Rodrigo Campos <rodrigo@sdfg.com.ar>
gzip: add "--keep" option to retain (don't delete) input files
gzip now accepts the --keep (-k) option, for consistency with tools
like xz, lzip and bzip2. With this option, gzip no longer removes
named input files when compressing and decompressing.
* doc/gzip.texi: Document it.
* gzip.1: Likewise.
* gunzip.in: Likewise.
* NEWS: Likewise.
* gzip.c: Add support for "--keep".
2013-04-15 Paul Eggert <eggert@cs.ucla.edu>
tests: redo patch for non-GNU gzip installed in /usr/local/bin
Problem with previous patch reported by Antonio Diaz Diaz in
<http://lists.gnu.org/archive/html/bug-gzip/2013-04/msg00011.html>.
* tests/help-version (gunzip_setuphelp, gzexe_setuphelp)
(zcat_setuphelp, zcmp_setuphelp, zdiff_setuphelp)
(zegrep_setuphelp, zfgrep_setuphelp, zforce_setuphelp)
(zgrep_setuphelp, zless_setuphelp, zmore_setuphelp)
(znew_setuphelp): New functions, used when testing even --help.
(zdiff_setup, zcat_setup, znew_setup, zgrep_setup, gzexe_setup):
Use gzip_setuphelp to set --__bindir.
2013-04-10 Paul Eggert <eggert@cs.ucla.edu>
tests: work even if non-GNU gzip is installed in /usr/local/bin
Problem reported by Antonio Diaz Diaz in
<http://lists.gnu.org/archive/html/bug-gzip/2013-04/msg00004.html>.
* tests/help-version (zdiff_setup, zcat_setup, znew_setup, zgrep_setup)
(gzexe_setup): Pass --__bindir so that subsidiary programs are our
own's, not /usr/local/bin's. This requires using 'eval' on the result.
(zcmp_setup, gunzip_setup, zmore_setup, zless_setup, zforce_setup)
(zegrep_setup, zfgrep_setup): Invoke one of the other setup functions,
to make the patterns more obvious and simplify future maintenance.
* zcmp.in, zegrep.in, zfgrep.in: Pass __bindir to subsidiary program.
maint: adjust to Gnulib, Automake changes
* .gitignore: Add *.trs.
* lib/.gitignore: Add unused-parameter.h.
tests: port to Solaris 10 /bin/sh
* tests/Makefile.am (TESTS_ENVIRONMENT):
Use "FOO=val; export FOO" rather than "export FOO=val",
as the latter form doesn't work with Solaris /bin/sh.
2013-02-25 Paul Eggert <eggert@cs.ucla.edu>
gzip: port to DMF file systems
* util.c (read_buffer): When reading a file with O_NONBLOCK, if
the read fails with errno==EAGAIN, clear O_NONBLOCK and try again.
Problem reported by Vitezslav Cizek in
<http://lists.gnu.org/archive/html/bug-gzip/2013-02/msg00030.html>.
2013-02-05 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix bug where you say "n" and gzip acts as if you said "y"
Problem reported for GCC 4.7 x86-64 -O2 by Allan McRae in
<http://lists.gnu.org/archive/html/bug-gzip/2013-02/msg00000.html>.
* NEWS: Document this. Use consistent format in earlier note.
* gzip.c: Include yesno.h.
* gzip.h (yesno): Remove decl; that's yesno.h's job.
2013-01-06 Paul Eggert <eggert@cs.ucla.edu>
maint: adjust to Gnulib changes
* lib/.gitignore: Add glthread, math.c, unistd.c, wctype-h.c.
* m4/.gitignore: Remove inline.m4.
2013-01-04 Jim Meyering <jim@meyering.net>
maint: update all copyright year number ranges
Run "make update-copyright".
build: update gnulib submodule to latest
2012-12-10 Paul Eggert <eggert@cs.ucla.edu>
diagnose unexpected EOF and zero lengths in packed data
Problem reported by Aki Helin.
* NEWS: Mention Aki's reports.
* tests/unpack-invalid: New file,
with test data suggested by Aki.
* tests/Makefile.am (TESTS): Add it.
* unpack.c (read_byte): New function.
(look_bits, read_tree): Use it.
(read_tree): Check against zero bit length Huffman code.
gzip: diagnose invalid code in packed data
* unpack.c (unpack): When encountering a code out of range, report
it and fail rather than charging ahead with randomish output.
Problem reported by Aki Helin.
2012-11-16 Jim Meyering <jim@meyering.net>
maint: avoid new syntax-check failures
* cfg.mk (_gl_TS_unmarked_extern_vars): Append nice_match, to avoid
false-positive syntax-check failure on i686.
* gzip.c (SIGPIPE): Remove definition. Now always provided via gnulib.
* lib/.gitignore: xsize.c, added by gnulib-tool.
2012-11-16 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix debugging/porting typo
* unlzw.c (unlzw) [DEBUG]: Don't assume 'long' can be printed with %d.
maint: merge build improvements from coreutils
* configure.ac: Invoke gl_ASSERT_NO_GNULIB_POSIXCHECK.
(--enable-gcc-warnings): Change help message.
(gl_GCC_VERSION_IFELSE): New macro.
Do not omit -Wunused-macros for main code.
Adjust other -W options as per coreutils.
* lib/Makefile.am (AM_CFLAGS): Use GNULIB_WARN_CFLAGS, not WARN_CFLAGS.
* unlzw.c (REGISTERS, REG1, REG2, ..., REG16): Remove.
All uses removed. These provoked -Wunused-macros warnings.
This sort of fiddling with registers hasn't been needed for years.
build: update gnulib submodule to latest
maint: port to platforms lacking SIGPIPE
* gzip.c (SIGPIPE): Define to 0 if not already defined.
doc: bring up to date and fix troff typos
* doc/gzip.texi (Overview): Update RFC URLs.
* gzip.1: Likewise. Don't say "SEE ALSO" to programs that almost
nobody has installed anymore.
* gzip.1, zmore.1: Fix some troff typos.
* zdiff.1: Clarify what happens with input files. Don't talk
about temporary file names, as they're rarely used these days.
2012-10-24 Paul Eggert <eggert@cs.ucla.edu>
tests: exercise the grep -e portability fix
Remove workaround for Solaris, since the bug should be fixed now.
Suggested by Petr Sumbera in
<http://lists.gnu.org/archive/html/bug-gzip/2012-10/msg00005.html>.
* tests/zgrep-context, tests/zgrep-f: All uses removed.
* tests/init.cfg (require_POSIX_grep_): Remove.
2012-10-23 Eric Blake <eblake@redhat.com>
build: default to --enable-gcc-warnings in a git tree
Anyone building from cloned sources can be assumed to have a new
enough environment, such that enabling gcc warnings by default will
be useful. Tarballs still default to no warnings, and the default
can still be overridden with --disable-gcc-warnings.
* configure.ac (gl_gcc_warnings): Set default based on environment.
2012-10-20 Paul Eggert <eggert@cs.ucla.edu>
zgrep: do not assume standard 'grep' has -e
On Solaris 11, /usr/bin/grep -e does not work.
Problem reported by Petr Sumbera in
<http://lists.gnu.org/archive/html/bug-gzip/2012-10/msg00003.html>.
* Makefile.am (.in): Substitute @GREP@.
* configure.ac (AC_PROG_GREP): Invoke.
* zgrep.in (grep): Use @GREP@.
2012-08-14 Paul Eggert <eggert@cs.ucla.edu>
zgrep: do not assume GNU expr
* zgrep.in: Do not assume '\+' has the GNU behavior in the BRE
given to 'expr', as POSIX does not guarantee that. Come to think
of it, use a shell pattern rather than 'expr', as this is more
efficient.
2012-08-08 Jim Meyering <meyering@redhat.com>
tests: exercise the just-fixed part of zgrep
* tests/zgrep-context: New file.
* tests/Makefile.am (TESTS): Add it.
2012-08-08 Jim Meyering <meyering@redhat.com>
zgrep: handle a multi-digit context option like -15
* zgrep.in: Do not malfunction when given an option like -15.
Before, it could end up treating the pattern as a file name:
$ echo x | gzip | zgrep -15 x
gzip: x.gz: No such file or directory
* NEWS (Bug fixes): Mention it.
Reported by Dan Bloch via Thomas Bushnell in
https://bugs.launchpad.net/bugs/1032831
2012-08-07 Jim Meyering <meyering@redhat.com>
build: update gnulib, bootstrap and init.sh
maint: fix misspellings in old ChangeLog and NEWS
* ChangeLog-2007: s/Supress/Suppress/
* NEWS: Likewise.
* cfg.mk (old_NEWS_hash): Update to match typo fix.
2012-06-19 Paul Eggert <eggert@cs.ucla.edu>
zmore: rewrite to fix bugs and assume POSIX
Problem reported for Solaris 9 by Daniel in
<http://lists.gnu.org/archive/html/bug-gzip/2012-06/msg00007.html>.
Rather than figure out what exactly went wrong in Solaris 9
it was easier to rip out all the buggy compatibility and stty cruft.
* zmore.in: Don't use stty or trap; simply pipe the output to 'more'
and let it deal with signals and terminal control.
Use printf, not 'echo', to avoid problems with backslashes.
Don't assume ANS is not 's' in the environment.
Use a 'more'-style header instead of rolling our own style.
Paginate the header, too; the old behavior lost the header.
* NEWS, zmore.1: Document this.
2012-06-17 Jim Meyering <meyering@redhat.com>
maint: add .mailmap
* .mailmap: New file. Unify two spellings of Paul's name,
to make git log output slightly cleaner.
maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.5
* NEWS: Record release date.
build: update gnulib for fixed maint.mk
build: update gnulib submodule; bootstrap and init.sh, too
* cfg.mk: Exempt crufty tailor.h from its use of "#define off_t...".
* .gitignore, m4/.gitignore: Update semi-automatically (via bootstrap).
2012-04-24 Paul Eggert <eggert@cs.ucla.edu>
doc: document -rf change
* NEWS: Document the ZFS fix.
gzip: remove CLOSEDIR
* gzip.c (CLOSEDIR): Remove; no longer used.
gzip: port gzip -rf to ZFS
Problem reported privately by Rich Burridge.
* bootstrap.conf: Add savedir.
* gzip.c: Include <savedir.h>.
(_D_EXACT_NAMELEN): Remove.
(treat_dir): Use savedir rather than reading directory entries one
at a time, to avoid revisiting an already-compressed file when using
ZFS and the -rf flags are specified.
* lib/.gitignore, m4/.gitignore: Ignore savedir-related files.
2012-03-18 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix nondeterministic compression results
Reported by Jakub Wilk in <http://bugs.debian.org/647522>.
* deflate.c (fill_window): Don't let garbage pollute the dictionary.
2012-01-11 Jim Meyering <meyering@redhat.com>
tests: make all test scripts executable; work with automake-1.12
* tests/Makefile.am (TESTS_ENVIRONMENT): Adapt to work with upcoming
automake-1.12.
* tests/mixed: Make executable.
* tests/zgrep-f: Likewise.
* tests/zgrep-signal: Likewise.
* tests/znew-k: Likewise.
build: accommodate newer bootstrap from gnulib
* bootstrap.conf (gnulib_tool_option_extras): Add both --symlink
and --makefile-name=gnulib.mk.
* bootstrap: Update from gnulib.
* tests/init.sh: Update from gnulib.
* lib/Makefile.am: Initialize all of the following so that
generated code in gnulib.mk may use += to append to those variables:
AM_CFLAGS, BUILT_SOURCES, CLEANFILES, EXTRA_DIST, MOSTLYCLEANDIRS,
MOSTLYCLEANFILES, SUFFIXES, noinst_LTLIBRARIES.
2012-01-01 Jim Meyering <meyering@redhat.com>
maint: update all copyright year number ranges
Run "make update-copyright".
2011-12-21 Paul Eggert <eggert@cs.ucla.edu>
zless: decompress stdin too, if less 429 or later
* zless.in: Use LESSOPEN |- feature of less 429 or later.
Problem reported by Jeroen Roovers via Mike Frysinger in
<http://lists.gnu.org/archive/html/bug-gzip/2011-12/msg00006.html>.
2011-11-29 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
build: accommodate gnulib's new warnings with --enable-gcc-warnings
* configure.ac (WERROR_CFLAGS): Disable two new warnings:
-Wno-format-nonliteral, -Wno-unsuffixed-float-constants.
* gzip.h (bi_reverse): Declare with _GL_ATTRIBUTE_CONST.
(gzip_base_name): Declare with _GL_ATTRIBUTE_PURE.
2011-11-29 Jim Meyering <meyering@redhat.com>
tests: use "compare exp out", not "compare out exp"
Likewise, when an empty file is expected, use "compare /dev/null out",
not "compare out /dev/null". I.e., specify the expected/desired contents
via the first file name. Prompted by a suggestion from Bruno Haible
in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154
Run these commands:
git grep -l -E 'compare [^ ]+ exp' \
|xargs perl -pi -e 's/\b(compare) (\S+) (exp\S*)/$1 $3 $2/'
git grep -l -E 'compare [^ ]+ /dev/null' \
|xargs perl -pi -e 's,\b(compare) (\S+) (/dev/null),$1 $3 $2,'
2011-11-05 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
2011-11-02 Paul Eggert <eggert@cs.ucla.edu>
* tests/zgrep-signal: Don't assume exit status 141 on PIPE signal.
Problem reported by Eric Blake in
<http://lists.gnu.org/archive/html/bug-gzip/2011-11/msg00007.html>.
* tests/zgrep-signal: Use perl instead of a nonportable shell trap.
Problem reported by Eric Blake in
<http://lists.gnu.org/archive/html/bug-gzip/2011-11/msg00005.html>.
* tests/zgrep-signal: Test for Fedora 15 signal bug.
Also, don't assume that SIGPIPE is SIG_DFL on entry.
2011-11-02 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
tests: mixed: correct size-enumeration logic
* tests/mixed (sizes): Fix misplaced "&& break" that made us test
only with a size of 0, rather than all sizes in 0..64.
maint: avoid "make syntax-check" failure
* gzip.c (treat_stdin): Indent with spaces, not TABs.
2011-11-02 Paul Eggert <eggert@cs.ucla.edu>
* gzip.c (treat_stdin): If quiet, be quiet with plain gzip -q.
Problem reported by Michaël Guitton in
<http://lists.gnu.org/archive/html/bug-gzip/2011-11/msg00000.html>.
2011-08-10 Jim Meyering <meyering@redhat.com>
maint: remove amiga, atari, msdos, nt, os2, vms sub-directories,
and all files therein. This was proposed months prior, and no
one objected.
* amiga/Makefile.gcc: Remove file.
* amiga/Makefile.sasc: Likewise.
* amiga/match.a: Likewise.
* amiga/tailor.c: Likewise.
* amiga/utime.h: Likewise.
* atari/Makefile.st: Likewise.
* msdos/Makefile.bor: Likewise.
* msdos/Makefile.djg: Likewise.
* msdos/Makefile.msc: Likewise.
* msdos/doturboc.bat: Likewise.
* msdos/gzip.prj: Likewise.
* msdos/match.asm: Likewise.
* msdos/tailor.c: Likewise.
* nt/Makefile.nt: Likewise.
* os2/Makefile.os2: Likewise.
* os2/gzip.def: Likewise.
* os2/gzip16.def: Likewise.
* vms/Makefile.gcc: Likewise.
* vms/Makefile.mms: Likewise.
* vms/Makefile.vms: Likewise.
* vms/Readme.vms: Likewise.
* vms/gzip.hlp: Likewise.
* vms/makegzip.com: Likewise.
* vms/vms.c: Likewise.
* Makefile.am (EXTRA_DIST): Remove those file names.
build: use largefile module and update to latest gnulib
* configure.ac: Remove AC_SYS_LARGEFILE, subsumed by ...
* bootstrap.conf (gnulib_modules): ...this. Use largefile module.
* gnulib: Update to latest.
2011-07-12 Jim Meyering <meyering@redhat.com>
maint: update init.sh and bootstrap from gnulib
* bootstrap: Update from gnulib.
* tests/init.sh: Update from gnulib.
maint: use gnulib's realloc-gnu and malloc-gnu modules
* bootstrap.conf (gnulib_modules): Use realloc-gnu and malloc-gnu,
rather than the now-deprecated realloc and malloc modules.
build: update gnulib submodule to latest
2011-06-21 Paul Eggert <eggert@cs.ucla.edu>
* deflate.c: Export nice_match to assembler.
(static_unless_ASMV): New macro.
(nice_match): Use it.
2011-06-08 Jim Meyering <meyering@redhat.com>
build: fix "make syntax-check"
* cfg.mk (_gl_TS_unmarked_extern_vars): Add good_match.
build: avoid link failure: this time on i686 linux
* deflate.c (good_match): Must not be static, since it may
be used from lib/match.c.
2011-05-14 Jim Meyering <meyering@redhat.com>
build: avoid link failure on at least i386-FreeBSD7.2
* deflate.c (match_start, prev_length, max_chain_length): Do not
declare these as static. On some types of system/arch, they are
used via match_.s.
* cfg.mk (_gl_TS_unmarked_extern_vars): Mark those three variables
as known-extern: match_start, prev_length, max_chain_length.
2011-05-13 Jim Meyering <meyering@redhat.com>
avoid new build failure on a system without <crypt.h>
* bits.c: Don't include "crypt.h", now that it's deleted.
maint: use gnulib's new readme-release module
* bootstrap.conf (gnulib_modules): Add readme-release.
(bootstrap_epilogue): Add the recommended perl one-liner.
* README-release: Remove file; it is now generated from gnulib.
* .gitignore: Add it.
2011-05-09 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
maint: prepare for gnulib's new tight-scope syntax-check rule
* cfg.mk (_gl_TS_dir): Define.
(_gl_TS_unmarked_extern_vars): Define.
maint: declare many variables to be static
* deflate.c: Likewise.
* gzip.c: Likewise.
* gzip.h: Likewise.
* inflate.c: Likewise.
* trees.c: Likewise.
* unzip.c: Likewise.
* util.c: Likewise.
maint: remove crypt.[ch] stubs
* Makefile.am (gzip_SOURCES): Remove crypt.c
(EXTRA_DIST): Remove crypt.h
* crypt.c, crypt.h: Remove files.
* unpack.c: Don't #include "crypt.h"
* zip.c: Likewise
* util.c: Likewise.
* unzip.c: Likewise.
maint: limit scope of several functions
* deflate.c (longest_match): Move extern declaration into #if-ASMV block.
[!ASMV]: Define as static.
* inflate.c: Remove unnecessary prototypes.
ANSI-declify functions and declare them to be static.
maint: remove all uses of OF((...)) prototype-hiding macro
* bits.c: Remove all uses of OF.
* deflate.c: Likewise.
* gzip.c: Likewise.
* inflate.c: Likewise.
* lzw.h: Likewise.
* trees.c: Likewise.
* unlzh.c: Likewise.
* unpack.c: Likewise.
* util.c: Likewise.
* gzip.h: Likewise.
(OF): Remove its definition, too.
maint: prepare for tight-scope rule: use noinst_HEADERS
* Makefile.am (EXTRA_DIST): Move lzw.h and gzip.h from here to ...
(noinst_HEADERS): ...here.
For convenience, since the tight-scope rule uses $(noinst_HEADERS).
2011-04-14 Jim Meyering <meyering@redhat.com>
maint: update bootstrap and init.sh from gnulib
* bootstrap: Likewise.
* tests/init.sh: Update from gnulib.
maint: note that we'll remove amiga, atari, msdos, nt, os2, vms soon
If someone can show that any of these are being used, let us know.
* TODO: Note the plan to remove those directories this year.
build: update gnulib submodule to latest
maint: fix typos in vms manual: s/it\nit/\nit/
* vms/gzip.hlp: Remove doubled "it".
2011-04-10 Jim Meyering <meyering@redhat.com>
maint: fix typos in comment: s/to to/to/
* deflate.c: Remove doubled 'to's.
2011-03-20 Jim Meyering <meyering@redhat.com>
maint: stop using .x-sc_* files to list syntax-check exemptions
Instead, use the new mechanism with which you merely use a
variable (derived from the rule name) defined in cfg.mk to an ERE
matching the exempted file names.
* gnulib: Update to latest, to get maint.mk that implements this.
* .x-sc_file_system: Remove file.
* .x-sc_prohibit_tab_based_indentation: Likewise.
* .x-sc_require_config_h: Likewise.
* .x-sc_require_config_h_first: Likewise.
* cfg.mk: Define variables to exempt the same files.
2011-03-18 Jim Meyering <meyering@redhat.com>
doc: correct README-release
* README-release: Remove mention of -announce mailing list.
Unlike coreutils, gzip does not have its own.
doc: update release procedure
* README-release: Resync from coreutils' file by the same name.
2011-01-03 Jim Meyering <meyering@redhat.com>
maint: update copyright year ranges to include 2011
Run "make update-copyright", so "make syntax-check" works in 2011.
build: update gnulib submodule to latest
maint: avoid failure of new test for bindtextdomain
* cfg.mk (local-checks-to-skip): Add sc_bindtextdomain.
2010-12-02 Jim Meyering <meyering@redhat.com>
maint: avoid "make syntax-check" failure due to old-NEWS modification
* cfg.mk (old_NEWS_hash): Update, to reflect recent NEWS correction.
2010-12-01 Paul Eggert <eggert@cs.ucla.edu>
* NEWS: The "gzip -f foo.gz" change occurred in 1.3.13, not 1.3.12
2010-11-10 Paul Eggert <eggert@cs.ucla.edu>
zgrep: don't assume traditional behavior with signal numbers
* zgrep.in: Don't assume the exit status is the signal number plus
128, as POSIX doesn't require this. No need to kill self; exiting
with large status is enough. Propagate all exit statuses greater
than 1, not merely those in the range 129..143, as there's no need
to treat that range specially (and it's not portable anyway).
2010-11-09 Paul Eggert <eggert@cs.ucla.edu>
zgrep: fix shell portability bug with -f; fix mishandling of "-e -"
* tests/zgrep-f: Check for "zgrep -e -" bug, too.
* zgrep.in: Don't assume that if the shell redirects fd 6, then
this redirection is visible to the subsidiary grep. POSIX doesn't
guarantee this visibility except for file descriptors 0, 1, and 2,
and ksh does not support it. Problem reported by Thomas Schulz in
<http://lists.gnu.org/archive/html/bug-gzip/2010-11/msg00000.html>.
Also, fix a related bug: "-e -" was mishandled. These two bugs
were introduced by commit 5b54db4546b84ec97ff57a62f8ddb98faacf77f2
dated 2009-10-09.
(escape): Change the convention: do not assume that a stray X
is present at the end of the last line. All uses changed.
There was no longer any need for this convention, and fixing this
made it a bit easier to use 'sed' in a later part of the fix.
2010-11-08 Paul Eggert <eggert@cs.ucla.edu>
maint: fix copyright dates that were munged by a maintenance script
* gunzip.in, gzexe.in, zcat.in, zcmp.in, zdiff.in, zforce.in:
* zgrep.in, zless.in, zmore.in, znew.in:
A script went awry when updating copyright dates in gzip's shell
scripts. It should update comments to look like "# Copyright (C)
2007, 2010 Free Software Foundation, Inc." (with a set of years)
and version messages to look like "Copyright (C) 2010 Free
Software Foundation, Inc." (with just the most-recent year).
Instead, it sometimes ignored one, sometimes the other, and
typically put ranges into version messages. Fix all this stuff by
hand, using dates that I divined from the change logs (so they're
a bit more accurate than script-generated dates). We need to fix
the script before it runs in 2011.
2010-10-23 Jim Meyering <meyering@redhat.com>
maint: anchor patterns in .gitignore files
* doc/.gitignore: Anchor patterns.
* lib/.gitignore: Likewise.
* m4/.gitignore: Likewise.
maint: update bootstrap and init.sh from gnulib
* bootstrap: Update.
* tests/init.sh: Update.
2010-10-23 Rob Vermaas <rob.vermaas@gmail.com>
maint: update to latest gnulib; use fdutimens, not gl_futimens
* gzip.c (copy_stat): Use fdutimens, not gl_futimens.
* gnulib: Update to latest.
2010-10-23 Jim Meyering <meyering@redhat.com>
maint: accommodate stricter syntax-check
Avoid #if, #define and #undef of always-defined symbols.
* gzip.c (ELOOP, SIGPIPE): Remove unneeded cpp directives.
* tailor.h (HAVE_DIRENT_H, HAVE_FCNTL_H, HAVE_UNISTD_H, MSDOS):
(O_BINARY): Likewise.
maint: make our use of gnulib's init.sh conform
* tests/help-version: Make use of init.sh conform.
* tests/helin-segv: Likewise.
* tests/help-version: Likewise.
* tests/hufts: Likewise.
* tests/memcpy-abuse: Likewise.
* tests/mixed: Likewise.
* tests/null-suffix-clobber: Likewise.
* tests/stdin: Likewise.
* tests/trailing-nul: Likewise.
* tests/zdiff: Likewise.
* tests/zgrep-f: Likewise.
* tests/zgrep-signal: Likewise.
* tests/znew-k: Likewise.
2010-10-10 Jim Meyering <meyering@redhat.com>
maint: describe policy on copyright year number ranges
* README: Mention coreutils' long-standing policy on use of M-N
ranges in copyright year lists. Requested by Richard Stallman.
2010-09-15 Paul Eggert <eggert@cs.ucla.edu>
zgrep: fix parsing of -Eh options
* zgrep.in: Update list of single-letter options to match what's
in GNU grep. Add -h as an alias for --no-filename. Bug reported
by Vladimir Sidorenko in
<http://lists.gnu.org/archive/html/bug-gzip/2010-09/msg00007.html>.
2010-08-17 Paul Eggert <eggert@cs.ucla.edu>
gzip: fix NO_SIZE_CHECK for VMS
* gzip.c (do_list): Use if, not #if.
* tailor.h (NO_SIZE_CHECK) [defined(VAXC) || defined(VMS)]: Define.
* zip.c (zip): Simplify conditional, which was incorrect at any rate
for VMS.
2010-08-15 Paul Eggert <eggert@cs.ucla.edu>
algorithm.doc: mention Internet RFC 1952 and modernize a bit
* algorithm.doc: Update to mention header-CRC and Internet RFC 1952.
Also, remove the crypto stuff, which never worked.
Inspired by that same suggestion of Greg Roelofs.
gzip: Use 0x%04x instead of %x when printing 16-bit checksums
* gzip.c (get_method): Use 0x%04x, not %x, to print 16-bit checksums.
Inspired by a suggestion of Greg Roelofs in
http://lists.gnu.org/archive/html/bug-gzip/2010-08/msg00004.html
2010-08-03 Paul Eggert <eggert@cs.ucla.edu>
maint: update bootstrap
* bootstrap, bootstrap.conf, tests/init.sh: Merge from gnulib.
2010-07-19 Paul R. Eggert <eggert@cs.ucla.edu>
gzip: don't assume C99, and don't assume overlapping memcpy should work
* tailor.h (NOMEMCPY): Remove. memcpy is entitled to not work
on overlapping blocks.
* inflate.c (inflate_codes): Don't put decl after statement.
Omit NOMEMCPY.
* gzip.c (get_method): don't assume size_t can be printed with %u
2010-07-02 Paul Eggert <eggert@cs.ucla.edu>
Mention that gzip -d now handles FHCRC.
2010-07-02 Paul Eggert <eggert@cs.ucla.edu>
Decode FHCRC flag properly, as per Internet RFC 1952.
Problem reported by Greg Roelofs in:
http://lists.gnu.org/archive/html/bug-gzip/2010-06/msg00003.html
* gzip.c (discard_input_bytes): New function.
(get_method): Check header checksum, if given. We never generate it,
but other programs may.
* gzip.h (HEADER_CRC): Renamed from CONTINUATION. All uses changed.
* tailor.h [defined __50SERIES]: Remove PRIMOS stuff that was obsolete
anyway and would have made this patch harder to maintain.
(get_char, put_char): Remove.
* zip.c (zip): Use put_byte instead of the now-removed put_char.
2010-07-01 Paul Eggert <eggert@cs.ucla.edu>
Don't assume that sizeof (long) == 4 when computing statistics.
* gzip.c (get_method): Don't assume sizeof (long) == 4.
* zip.c (zip): Likewise.
Update Info-ZIP name and coordinates (thanks to Greg Roelofs).
2010-05-11 Paul Eggert <eggert@cs.ucla.edu>
* doc/gzip.texi (Sample): Fix backslash quoting problem.
Problem reported by Ole Tange in
<http://lists.gnu.org/archive/html/bug-gzip/2010-05/msg00000.html>.
2010-04-26 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
maint: remove primos support
* Makefile.am (EXTRA_DIST): Remove all primos/ files.
* primos/build.cpl: Remove file.
* primos/ci.opts: Likewise.
* primos/include/errno.h: Likewise.
* primos/include/fcntl.h: Likewise.
* primos/include/stdlib.h: Likewise.
* primos/include/sysStat.h: Likewise.
* primos/include/sysTypes.h: Likewise.
* primos/primos.c: Likewise.
* primos/readme: Likewise.
2010-04-08 Jim Meyering <meyering@redhat.com>
build: include cfg.mk in the distribution tarball
* Makefile.am (EXTRA_DIST): Add cfg.mk.
2010-04-07 Eric Blake <eblake@redhat.com>
maint: ignore more built files
* .gitignore: Add version files.
2010-04-07 Jim Meyering <meyering@redhat.com>
tests: help-version: cross-check PATH in tests
* tests/help-version: Cross-check $VERSION and --version output.
* tests/Makefile.am (TESTS_ENVIRONMENT): Export VERSION=$(VERSION).
tests: improve help-version
* tests/help-version: Use fail_, rather than echo+Exit.
tests: pull help-version from grep
build: keep --version strictly up to date
Before this change, in development, gzip's --version output could lag
behind reality by a couple deltas or by a "-dirty" suffix. That would
lead to spurious failure of the new --version-$VERSION PATH cross-check.
* Makefile.am (version.c, version.h): New rules.
(BUILT_SOURCES): Set/append.
(noinst_LIBRARIES, noinst_libver_a_SOURCES): Define.
(gzip_LDADD): Add libver.a.
(DISTCLEANFILES): Define.
* gzip.c (license): Use Version, not VERSION.
2010-04-06 Jim Meyering <meyering@redhat.com>
tests: (portability) use st, not "status" as variable name
* tests/zgrep-signal: Do not use status as a variable name,
per autoconf's documentation that it is not portable to
some shells.
tests: s/framework_failure/framework_failure_/
tests: update init.sh from gnulib
* tests/init.sh: Update from gnulib.
tests: run most tests via tests/Makefile.am
* Makefile.am (SUBDIRS): List tests after ".".
Move most test-related things from here to ...
* tests/Makefile.am: ... here.
* configure.ac (AC_CONFIG_FILES): Add tests/Makefile.
* tests/helin-segv: Adjust.
* tests/help-version: Likewise.
* tests/hufts: Likewise.
* tests/memcpy-abuse: Likewise.
* tests/mixed: Likewise.
* tests/null-suffix-clobber: Likewise.
* tests/stdin: Likewise.
* tests/trailing-nul: Likewise.
* tests/zdiff: Likewise.
* tests/zgrep-f: Likewise.
* tests/zgrep-signal: Likewise.
* tests/znew-k: Likewise.
tests: skip tests that use grep's -f and -E options, if they don't work
* tests/init.cfg (require_grep_minus_f): New function.
* tests/zgrep-f: Use require_grep_minus_f. Use path_prepend_.
tests: arrange for skip and failure notices to go to stderr, not .log
* tests/init.cfg: New file. Make init.sh's stderr_fileno_ match
what the "exec 9>&2" we use in TESTS_ENVIRONMENT.
* Makefile.am (EXTRA_DIST): Add it.
2010-04-06 Eric Blake <eblake@redhat.com>
maint: ignore generated files
* .gitignore: Ignore recent gnulib additions.
maint: update bootstrap
* bootstrap: Use latest copy from gnulib/build-aux.
2010-04-05 Jim Meyering <meyering@redhat.com>
build: use gnulib's lib-ignore module
* bootstrap.conf (gnulib_modules): Add lib-ignore, in case it helps.
* Makefile.am (AM_LDFLAGS): Define it.
maint: let configure-invoked cpp emit diagnostics to config.log
* configure.ac: Do not discard CPP's stderr.
build: update gnulib submodule to latest, and adapt
* cfg.mk: Update to use new _sc_search_regexp interface. Run this:
perl -pi -e 's/\b_prohibit_regexp\b/_sc_search_regexp/;'
-e 's/\bmsg=/halt=/; s/\bre=/prohibit=/;' cfg.mk
and then adjust backslashes so they still line up.
* cfg.mk (local-checks-to-skip): Add new sc_texinfo_acronym, to skip it.
* msdos/tailor.c (fcalloc): Mark a diagnostic for translation, to
placate stricter syntax-check, even though no one uses this file.
use assembly code matcher when possible
* configure.ac (ASCPPPOST): Backslash-escape "#" in AC_SUBST'd
variable, to keep make from seeing it as a comment-introducer.
Based on a patch by Petr Pisar.
* lib/Makefile.am (match.$(OBJEXT)): Use AM_V_GEN and AM_V_at.
* lib/match.c: Don't include <config.h>.
It would impede configure-time assembler test.
* .x-sc_require_config_h: Exempt lib/match.c from syntax-check.
* .x-sc_require_config_h_first: Likewise.
2010-03-20 Jim Meyering <meyering@redhat.com>
do not use stat.st_mtime of a non-regular file
* gzip.c: Include "timespec.h".
(treat_stdin): Use st_mtime only from a regular file.
This matters at least on Cygwin 1.7.1-1, for which a stdin-pipe has
the mtime of /dev/null, rather than the gzip-documented-for-pipes
"current time". Reported by Denis Excoffier.
2010-02-22 Jim Meyering <meyering@redhat.com>
tests: exercise the fix for the decompression data-loss bug
* tests/null-suffix-clobber: New file.
* Makefile.am (TESTS): Add it.
gzip: fix a data-loss bug when decompressing with --suffix=''
* gzip.c (main): Disallow an empty --suffix=S also with -d.
Otherwise, "gzip -d -S '' F.gz" would ask if it's ok to remove the
existing file, "F.gz"; if you reply "yes", you'd lose all of that data.
Use of an empty suffix was already rejected in compression mode.
* gzip.1 (--suffix (-S)): Do not recommend to use "gunzip -S '' *".
Describe how the suffix is used when decompressing, too.
* NEWS (Bug fixes): mention the fix.
Reported by Ripduman Sohan.
tests: add ---presume-input-tty option, solely for testing
* gzip.c: Include <stdbool.h>.
(presume_input_tty): New global.
(main): Set it.
(treat_stdin, check_ofname): Use it.
2010-02-07 Jim Meyering <meyering@redhat.com>
doc: minor adjustment to README-release
* README-release: Tweak description, to sync from coreutils.
tests: add the help-version sanity tests from coreutils
* tests/help-version: New file, from coreutils.
* Makefile.am (TESTS): Add it.
tests: make distcheck invoke "make syntax-check" and other tests
* dist-check.mk: New file, from coreutils.
* cfg.mk: Include it.
* Makefile.am (distcheck-hook): New rule, to make us use it.
zcmp: consistently indicate failure with exit status of 2
* zcmp.in: Exit with status of 2 (not 1), when writing
--help or --version output fails, to be more like cmp.
2010-02-03 Jim Meyering <meyering@redhat.com>
tests: add more tests of gzip -cdf
* tests/mixed: Test "gzip -cdf" for a range of small uncompressed files.
tests: flip and adjust mixed test, now that the bug is fixed
* NEWS (Bug fixes): Mention the fix.
* Makefile.am (XFAIL_TESTS): Move tests/mixed from here...
(TESTS): ...to here.
* tests/mixed: Comment out the currently (always?) failing part.
2010-02-03 Mark Adler <madler@alumni.caltech.edu>
gzip -cdf now handles concatenation of gzip'd and uncompressed data
* util.c (copy): Change semantics so as to honor a decremented inptr.
* gzip.c (get_method): When needed (-cdf), decrement inptr rather
than clearing it -- and output the first magic byte.
2010-02-03 Dmitry V. Levin <ldv@altlinux.org>
zgrep: terminate gracefully when a pipeline is interrupted by a signal
zgrep is not terminated gracefully when its grep/sed pipeline
is terminated by a signal. For example, a command like
zgrep -F .TH /usr/share/man/man1/*.gz | head
continues working long after the "head" process completes.
Another example, a command like
zgrep unmatched-pattern /usr/share/man/man1/*.gz
cannot be interrupted by sending a SIGQUIT with Ctrl-\ key, it outputs
zgrep: line 221: test: : integer expression expected
and goes on.
* zgrep.in: Terminate gracefully when the grep/sed pipeline is
terminated by a signal.
* tests/zgrep-signal: New test.
* Makefile.am (TESTS): Add it.
2010-02-03 Jim Meyering <meyering@redhat.com>
maint: teach "make syntax-check" the space-only indentation rule
* cfg.mk (sc_prohibit_tab_based_indentation): New rule, from coreutils.
(sc_prohibit_emacs__indent_tabs_mode__setting): Likewise.
* bootstrap: Remove "indent-tabs-mode: nil" directive.
* .x-sc_prohibit_tab_based_indentation: New file.
2010-02-02 Jim Meyering <meyering@redhat.com>
global: convert indentation-TABs to spaces
Transformed via this shell code:
t=$'\t'
git ls-files \
| grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \
| grep -vE 'tests/pr/|help2man' \
| xargs grep -lE "^ *$t" \
| xargs perl -MText::Tabs -ni -le \
'$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
2010-02-02 Dmitry V. Levin <ldv@altlinux.org>
wrapper scripts: write diagnostics to stderr, not to stdout
* zforce.in: In case of usage error, output short error diagnostics to
stderr instead of printing help text to stdout.
* zmore.in: Likewise.
* znew.in: Likewise.
2010-02-02 Jim Meyering <meyering@redhat.com>
gzip -cdf mishandles some concatenated input streams: test it
* tests/mixed: Exercise "gzip -cdf" bug.
* Makefile.am (XFAIL_TESTS): Add it.
Mark Adler reported the bug.
tests: move the hufts-segv test to its own file
* tests/hufts: New test.
* Makefile.am (TESTS): Add tests/
(check-local): Remove the hufts-segv test from this rule.
tests: begin moving tests into their own files
* Makefile.am (TESTS): Add tests/stdin.
(check-local): Move the stdin check to its own file:
* tests/stdin: New script.
tests: remove unnecessary use of "path_prepend_ ."
It is unnecessary, since Makefile.am's TESTS_ENVIRONMENT setting
already adds the top build directory, and besides, is only
marginally useful when running stand-alone, since it presumes
that the script is being run from the top build directory.
* tests/helin-segv: Remove unnecessary use of path_prepend_.
* tests/memcpy-abuse: Likewise.
* tests/trailing-nul: Likewise.
* tests/zdiff: Likewise.
* tests/zgrep-f: Likewise.
tests: note that znew-k test depends on length of temp file name
* tests/znew-k: Tweak diagnostic, factor and add a surprising comment.
2010-02-01 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
2010-02-01 Dmitry V. Levin <ldv@altlinux.org>
fix "znew -K" to work without use of compress utility
* znew.in: Change -K option to imply -t, do not use compress(1).
* znew.1: Document it.
* tests/znew-k: New test.
* Makefile.am (TESTS): Add it.
2010-01-20 Jim Meyering <meyering@redhat.com>
maint: update README-release procedure
* README-release: sync from coreutils.
post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.4
* NEWS: Record release date.
tests: exercise the segfault fix
* tests/helin-segv: New test.
* Makefile.am (TESTS): Add it.
gzip -d: do not clobber stack for valid input on x86_64
* unlzw.c (unlzw): Avoid integer overflow.
Aki Helin reported the segfault along with an input to trigger the bug.
* NEWS (Bug fixes): Mention it.
maint: avoid a minor "make syntax-check" failure
* .x-sc_file_system: Exempt NEWS, since it includes a literal
from an old diagnostic.
maint: remove unused file: README-alpha
* README-alpha: Remove unused file.
build: update gnulib submodule to latest
2010-01-11 Yuxi Zhang <YZhang@qnx.com>
gzip -d: use memcpy more often
* inflate.c (inflate_codes): Use memcpy (rather than slower
memcopy-like code) in more cases.
2010-01-11 Jim Meyering <meyering@redhat.com>
build: do not override gnulib-provided AM_CFLAGS options
Avoid a warning from automake:
lib/Makefile.am:24: AM_CFLAGS multiply defined in condition TRUE ...
lib/gnulib.mk:30: ... `AM_CFLAGS' previously defined here
lib/Makefile.am:20: `lib/gnulib.mk' included from here
* lib/Makefile.am (AM_CFLAGS): Append $(WARN_CFLAGS) and
$(WERROR_CFLAGS), i.e., use "+=", not "=".
This was introduced via 2009-12-17 commit 0341fc22,
"build: with --enable-gcc-warnings, use -Werror",
but fortunately is not a bug, because the definition
it would have overridden was always empty.
2010-01-10 Jim Meyering <meyering@redhat.com>
gzip -d would fail with a CRC error...
...for some inputs, and some memcpy implementations. It is possible
that an offending input has to be compressed "from FAT filesystem
(MS-DOS, OS/2, NT)", since the sole reproducer no longer evokes a
CRC error when uncompressed and recompressed on a GNU/Linux system.
Also, using an unpatched reverse-memcpy-gzip on over 100,000 inputs
on a GNU/Linux system did not turn up another reproducer.
* inflate.c (inflate_codes): Don't call memcpy with overlapping regions.
Properly detect when source and destination overlap.
* tests/memcpy-abuse: New test, to trigger misbehavior.
* Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Alain Magloire in
http://thread.gmane.org/gmane.comp.gnu.gzip.bugs/307
2010-01-08 Jim Meyering <meyering@redhat.com>
tests: switch to gnulib's init.sh test infrastructure
* tests/test-lib.sh: Remove file.
* tests/init.sh: New file, from gnulib.
* tests/trailing-nul: Use the new file.
* tests/zdiff: Likewise.
* tests/zgrep-f: Likewise.
* Makefile.am (EXTRA_DIST): List tests/init.sh, not test-lib.sh.
build: update gnulib submodule to latest
2010-01-03 Jim Meyering <meyering@redhat.com>
maint: record update-copyright options for this package
* cfg.mk: Next time, just run "make update-copyright".
2010-01-01 Jim Meyering <meyering@redhat.com>
maint: update all FSF copyright year lists to include 2010
Use this command:
git ls-files |grep -vE '^(\..*|COPYING|gnulib)$' |xargs \
env UPDATE_COPYRIGHT_USE_INTERVALS=1 build-aux/update-copyright
2009-12-31 Jim Meyering <meyering@redhat.com>
maint: newer gnulib; don't hard-code my GPG key ID
* cfg.mk (gpg_key_ID): Remove definition, now that maint.mk automates it.
* gnulib: Update to lastest.
2009-12-30 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
maint: remove lots of obsolete #if...HAVE_* checks
Remove many always-true cpp tests like #ifdef HAVE_UNISTD_H,
#ifdef HAVE_FCNTL_H and #ifdef SSIZE_MAX.
* gzip.c: As above.
* gzip.h: Likewise.
* inflate.c: Likewise.
* tailor.h: Likewise.
* unlzw.c: Likewise.
* util.c: Likewise.
* zip.c: Likewise.
build: add a syntax-check
* cfg.mk (sc_prohibit_obsolete_HAVE_HEADER_H): New rule.
build: with --enable-gcc-warnings, use -Werror
* Makefile.am (AM_CFLAGS): Enable $(WERROR_CFLAGS).
* lib/Makefile.am (AM_CFLAGS): Enable both $(WARN_CFLAGS) and
$(WERROR_CFLAGS).
build: quiet warnings from util.c
* configure.ac (warnings): Add -Wno-overflow and -Wno-type-limits.
build: avoid warning about possibly-no-return functions
* gzip.h (read_error, write_error): Mark these functions as "no-return".
build: avoid warning about ignored chown/fchown return value
* bootstrap.conf (gnulib_modules): Add ignore-value.
* gzip.c: Include "ignore-value.h".
(copy_stat): Explicitly ignore chown and fchown failure
build: update gnulib submodule to latest
2009-11-20 Jim Meyering <meyering@redhat.com>
build: unlzw.c: avoid warnings about unused macros
* configure.ac: Turn off -Wunused-macros.
build: avoid warnings about unused macros
* unzip.c (LOCTIM): Comment out unused macro.
* deflate.c (EQUAL): Remove definition. Use "0" at sole point of use.
build: util.c: avoid warnings about add_envopt
* util.c (add_envopt): The parameter "env" was used for two conflicting
purposes. One use required a const char* parameter, while the other
was used as an argument to free, which must not be "const".
Rename the parameter and use a new local variable for the second role.
build: avoid many const-related warnings
* gzip.c: Add "const" to many variables, to avoid compiler warnings.
* util.c (add_envopt): Make 3rd parameter const
(gzip_error): Make sole parameter const.
* gzip.h: Update prototypes.
build: avoid warnings from -Wstrict-prototypes
* gzip.c (main): Declare using a prototype.
(progerror): Likewise. And make parameter const.
build: use gnulib's fdopendir module
* bootstrap.conf (gnulib_modules): Add fdopendir.
* gzip.c (treat_dir): Don't depend on HAVE_FDOPENDIR.
Gnulib now guarantees its availability.
* configure.ac: Don't check for fdopendir here.
build: enable many warnings
* configure.ac: Add support for --enable-gcc-warnings.
* bootstrap.conf (gnulib_modules): Add manywarnings.
* Makefile.am (AM_CFLAGS): Add (WARN_CFLAGS) # $(WERROR_CFLAGS)
maint: tweak formatting of bootstrap.conf
* bootstrap.conf (gnulib_modules): Unindent list.
maint: cfg.mk: remove factored-out ftp host/dir definitions
* cfg.mk (gnu_ftp_host-alpha, gnu_ftp_host-beta gnu_ftp_host-stable):
(gnu_rel_host, url_dir_list): Remove definitions. The defaults,
now provided by maint.mk, are the same.
* gnulib: Update for latest, including those maint.mk additions.
build: "make stable" emitted an invalid gnupload command
* cfg.mk (gnu_ftp_host-stable): Rename from gnu_ftp_host-major.
* README-release: Change another s/major/stable/.
2009-10-30 Jim Meyering <meyering@redhat.com>
post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.3.14
* NEWS: Record release date.
build: accommodate new syntax-check test
* amiga/tailor.c (_expand_args): Change each of three uses of
"exit(20)" to "exit(EXIT_FAILURE)".
* sample/add.c: Include <stdlib.h>.
(main): Use EXIT_FAILURE and EXIT_SUCCESS, not 1 and 0.
* sample/sub.c (main): Likewise.
* sample/zread.c (main): Likewise.
build: update gnulib submodule to latest
build: link with $(LIB_CLOCK_GETTIME)
* Makefile.am (gzip_LDADD): Add $(LIB_CLOCK_GETTIME), now that
utimens pulls in gettime.
(FILES_TO_CHECK): Remove $(gzip_LDADD), now that it may contain -lrt.
2009-10-28 Jim Meyering <meyering@redhat.com>
msdos: fix syntax in Makefile.djg
* msdos/Makefile.djg (gzip): Change each of two leading 8-space
sequences to a TAB. Reported by Allan Mui.
2009-10-20 Jim Meyering <meyering@redhat.com>
build: do not use AC_PREFIX_PROGRAM
* configure.ac: Do not use "AC_PREFIX_PROGRAM(gzip)".
It would induce behavior that is so surprising that it is probably
universally considered to be buggy, these days. Reported by Zube
in http://thread.gmane.org/gmane.comp.gnu.gzip.bugs/273
2009-10-10 Jim Meyering <meyering@redhat.com>
gzip: add tests for today's bug fix
* tests/trailing-nul: New file. Test for today's fix.
* Makefile.am (TESTS): Add new script.
* NEWS (Bug fixes): Mention it.
2009-10-10 Daniel Barkalow <barkalow@iabervon.org>
gzip: don't fail when there is exactly one trailing NUL byte
* gzip.c (get_method): Require the second byte of magic only if
the first byte was nonzero.
2009-10-09 Jim Meyering <meyering@redhat.com>
build: enable automake color- and parallel-test options
* configure.ac (AM_INIT_AUTOMAKE): Enable color-tests and parallel-tests.
zgrep: portability improvements; exercise "-f -"
* zgrep.in: Adjust loop not to use seq; it's not portable enough.
Fail if we don't find a free file descriptor.
(exists): New function; Use it in place of less portable "test -e".
Testing for existence of /dev/fd/$fd doesn't work on Solaris 10,
since all 256 always exist (as char devices), but testing for
/proc/$$/fd/$fd does work, so do that instead.
* Makefile.am (TESTS): Add tests/zgrep-f.
* tests/zgrep-f: New test; exercise this bug.
* NEWS (Bug fixes): Mention it.
2009-10-09 Carl Worth <cworth@cworth.org>
zgrep: handle "-f -" the same way that it works with grep
Before this change, echo needle|zgrep -f - haystack.gz would not work.
* zgrep.in: When the pattern comes from stdin, redirect it to a
different file descriptor, since we're about to use stdin.
2009-10-09 Jim Meyering <meyering@redhat.com>
zdiff would exit 2 (error) rather than 1 for differences
* zdiff.in: Save and restore cmp's exit status around a case
statement that would otherwise clobber its value.
* NEWS (Bug fixes): Mention it.
* tests/zdiff: New test; exercise both bugs.
* tests/test-lib.sh: New file. From coreutils.
* Makefile.am (EXTRA_DIST): Add tests/test-lib.sh.
(TESTS): Add tests/zdiff.
(TESTS_ENVIRONMENT): Define. From coreutils.
(EXTRA_DIST): Append all $(TESTS).
zdiff: fix malfunction when operating on two gzip'd inputs
zdiff would fail to print differences in two compressed inputs
* zdiff.in: Don't let cmp output mix with echo'd gzip exit
status values. Report and fix from Jörg-Volker Peetz via
<http://bugs.debian.org/434275>
* NEWS (Bug fixes): Mention it.
build: update gnulib submodule to latest
2009-10-07 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
2009-10-06 Jim Meyering <meyering@redhat.com>
maint: clarify web-doc-update instructions
* README-release: sync a tiny change from coreutils.
2009-10-03 Jim Meyering <meyering@redhat.com>
build: update gnulib submodule to latest
doc: use gnu-web-doc-update module
* bootstrap.conf (gnulib_modules): Add it.
2009-10-02 Jim Meyering <meyering@redhat.com>
doc: describe release procedure
* README-release: New file.
2009-10-01 Jim Meyering <meyering@redhat.com>
maint: make cfg.mk slightly more generic
* cfg.mk (url_dir_list): Don't hard-code "coreutils". Use $(PACKAGE).
2009-09-30 Jim Meyering <meyering@redhat.com>
post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
version 1.3.13
* NEWS: Record release date.
build: update gnulib submodule to latest
maint: update bootstrap script
* bootstrap (with_gettext): Update from coreutils.
maint: pull in two release-related modules from gnulib
* bootstrap.conf (gnulib_modules): Add announce-gen and gnupload.
build: use more gnulib modules for better POSIX compliance
* bootstrap.conf (gnulib_modules): Add modules exposed via
make CFLAGS=-DGNULIB_POSIXCHECK 2>&1 \
|perl -lne '/.* use gnulib module (\S+).*/ and print $1' \
|sort |uniq -c|sort -nr
Add these: calloc close fclose fprintf-posix lstat malloc
perror printf-posix realloc
2009-09-30 Karl Berry <karl@freefriends.org>
doc: update to FDL 1.3, minor clean-up
* NEWS, README, TODO: Update FDL s/1.2/1.3/.
2009-09-28 Karl Berry <karl@freefriends.org>
doc: update gzip.texi
* doc/gzip.texi: FDL 1.3+
Consistently (de)capitalize section names.
"User's" is not correct; seems best to simplify the title.
Throw in some "GNU"'s.
Make direntries be what we actually want.
Detabify.
2009-09-26 Jim Meyering <meyering@redhat.com>
maint: temporarily exempt failing syntax-check tests
* cfg.mk (local-checks-to-skip): Add the list of currently-failing
tests, to exempt them from "make syntax-check".
gzip: don't use an uninitialized file descriptor
gzip interprets an argument of "-" as indicating stdin, but when
"-" is not the first name on the command line, it doesn't work.
* gzip.c (treat_stdin): Initialize "ifd".
Patch and fine description by Lasse Collin in
http://www.mail-archive.com/bug-gzip@gnu.org/msg00213.html
* Makefile.am (check-local): Exercise the fix. Based on the above.
* NEWS (Bug fixes): Mention this.
maint: use a git submodule for gnulib
* .gitmodules: New file, to track gnulib.
* gnulib: New file, created by running this:
git submodule add git://git.sv.gnu.org/gnulib.git gnulib
maint: update existing copyright year lists to include 2009
* bootstrap.conf (gnulib_modules): Add update-copyright.
maint: include <config.h> first in many files
maint: avoid another "make syntax-check" failure
* lib/Makefile.am (match.$(OBJEXT)): Use $(ASCPPPOST), not @ASCPPPOST@.
maint: remove RCS $Id$ variables and comments
maint: change spelling in comments: s/filesystem/file system/
maint: don't use "the the"
* msdos/doturboc.bat: s/the the/the/.
maint: remove trailing blanks
maint: remove useless if-before-free tests
* gzip.c (do_exit): Remove useless if-before-free tests.
maint: remove useless casts to avoid "make syntax-check" failures
* gzip.c (do_exit): Remove anachronistic cast.
* inflate.c (huft_free): Likewise.
* util.c (add_envopt): Likewise.
* vms/vms.c (vms_expand_args): Likewise.
maint: new file: .prev-version
* .prev-version: New file, to record previous version number.
2009-09-06 Jim Meyering <meyering@redhat.com>
build: avoid spurious warnings from clang
* gzip.h (gzip_error): Declare with ATTRIBUTE_NORETURN.
maint: update build-from-scratch infrastructure
* bootstrap: Modernize.
* bootstrap.conf: Modernize.
* cfg.mk: New file.
2009-08-18 Jim Meyering <meyering@redhat.com>
inflate: avoid a leak on a error path
* inflate.c (inflate_dynamic): Don't leak
maint: ignore a few generated files
* lib/.gitignore: ignore more generated files.
tests: add a test for just-fixed bug
* tests/hufts-segv.gz: New file, from bug report.
* Makefile.am (EXTRA_DIST): Add tests/hufts-segv.gz.
(check-local): Exercise the bug.
tests: don't misinterpret a failing test as successful
* Makefile.am (check-local): Exit "1" upon failure, not 0.
2009-08-18 Thiemo Nagel <thiemo.nagel@ph.tum.de>
avoid creating an undersized buffer for the hufts table
A malformed input file can cause gzip to crash with a segmentation
violation or hang in an endless loop.
Reported in <http://bugs.debian.org/507263>.
* NEWS (Bug fixes): Mention it.
2009-08-18 Jim Meyering <meyering@redhat.com>
avoid silent data loss e.g., on NFS, due to unchecked close of stdout
* gzip.c: Include "closein.h".
(main): Use atexit (close_stdin);
* bootstrap.conf (gnulib_modules): Add closein.
Prompted by Mark Kidwell's report and patch in
http://bugs.debian.org/538187
* NEWS (Bug fixes): Mention it.
* */.gitignore: Update.
build: require automake-1.11 and produce xz-compressed tarballs, too
* configure.ac: Require automake-1.11. Use the dist-xz option.
build: avoid non-srcdir build failure
* Makefile.am (gzip.doc.gz): Use $(srcdir)/gzip.doc, not gzip.doc.
Don't redirect directly to $@. Use $(AM_V_GEN).
(gzip.doc, .in): Don't redirect directly to $@. Use $(AM_V_GEN).
* NEWS: Add template header for upcoming release.
build: enable git-version-gen, automake silent rules, generate ChangeLog
* configure.ac (AC_INIT): Use git-version-gen.
Use AM_SILENT_RULES([yes]).
(AM_INIT_AUTOMAKE): Drop gnits; conflicts with git-version-gen versions.
* bootstrap.conf (gnulib_modules): Use getopt-gnu
Ensure ChangeLog exists, for automake.
rather than obsolete "getopt" module.
Add gitlog-to-changelog.
Add git-version-gen.
Add gnu-make, gnumakefile and maintainer-makefile.
* Makefile.am (dist-hook, gen-ChangeLog): New rules, to generate
ChangeLog and insert it into the distribution tarball.
(EXTRA_DIST): Add ChangeLog-2007.
maint: retire the last VC'd ChangeLog file
* ChangeLog-2007: Rename from ChangeLog.
From now on, the ChangeLog file will be generated automatically
from commit logs.
maint: rename .cvsignore files to .gitignore
* .gitignore: Renamed from .cvsignore.
* doc/.gitignore: Likewise.
* lib/.gitignore: Likewise.
* m4/.gitignore: Likewise.
Generated by dwww version 1.15 on Sat May 18 15:28:32 CEST 2024.