2008-12-28 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c: Ability to read extension blocks.
* coders/fits.c: Fixed MaxTextExtent limitation of blocks.
2008-12-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www/OpenMP.rst: Add results for Window Vista 64-bit / AMD Phenom
X4 9550.
* VisualMagick/installer/inc/body.isx: Revert yesterday's change
regarding the placement of config files. Place the config files
in a `config` subdirectory just as before.
2008-12-22 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* VisualMagick/installer/inc/body.isx: They say that when in Rome
you should do as the Roman's do. Based on this philosophy, all of
the coder and filter DLLs are now installed to the same directory
as the executables and DLLs which depend on them. This eases
operation under Windows Vista.
2008-12-21 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/blob.c: First pass at supporting large file access under
Windows.
2008-12-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/resource.c (InitializeMagickResources): Improve resource
estimation for Microsoft Windows systems with large memory.
* magick/segment.c: Added some code to dump histograms with
`-verbose -verbose`.
* coders/tiff.c: Support reading/writing 16 and 24 bit float TIFF
files.
* magick/constitute.c (ExportViewPixelArea): Support exporting 16
and 24 bit short floats. Relies on code developed for
GraphicsMagick by Richard Nolde.
(ImportViewPixelArea): Support importing 16 and 24 bit short
floats. Relies on code developed for GraphicsMagick by Richard
Nolde.
2008-12-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/operator.h (enum QuantumOperator): Added LogQuantumOp,
MaxQuantumOp, MinQuantumOp, and PowQuantumOp enumerations as well
as "Log", "Max", "Min", and "Pow" options to -operator.
2008-12-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (MogrifyImage): The -write option was not
implemented in a useful fashion and the +write option never worked
at all. Re-implement -write and eliminate +write from the
documentation since +write is not needed.
2008-12-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (ReadTIFFImage, WriteTIFFImage) Support reading
and writing 64-bit integer TIFF.
* magick/constitute.c (ImportViewPixelArea): Add support for
importing 64-bit integer values.
(ImportViewPixelArea): Add support for exporting 64-bit integer
values.
2008-12-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (ReadTIFFImage): Fix bug with reading one bit per
sample RGB images.
2008-12-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c (OpenCache): Fix a code ordering problem
which results in `identify` throwing an assertion for PseudoClass
image files. This bug was added in the 1.3.2 release.
* coders/tiff.c (ReadTIFFImage): Fix bug with `ping` mode.
2008-12-07 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c: Proper signed to unsigned conversion for 64 bit LSB images.
2008-12-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/Makefile.am: When X11 is disabled, don't compile the
X11-specific source modules. Don't ever install any X11-related
header files.
2008-12-06 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/segment.c (SegmentImage): Use `double` rather than 64-bit
integer to accumulate totalized values. Make the cluster summary
report more concise.
2008-12-06 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c: Fix for 64 bit images.
2008-12-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/segment.c (SegmentImage): Cluster threshold is expressed
as a percentage of total cluster pixels. Optimize for larger
images.
2008-12-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/segment.c (SegmentImage): Accelerate using OpenMP.
2008-11-30 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/utility.c (ExpandFilenames): Remove some arbitrary
argument length limits. Pass -convolve argument without any
additional checking. Verify that strings are not truncated during
copy.
(ListFiles): Be more memory efficient.
* magick/fx.c (ConvolveImage): Fix formatting problem when logging
the convolution kernel used.
* magick/utility.c (TranslateTextEx): Support formatting huge
comment text.
2008-11-28 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/fx.c (ConvolveImage): Don`t process opacity channel
unless image has one.
* magick/effect.c (MotionBlurImage): Use
AcquireOnePixelByReference() rather than AcquireImagePixels() to
retrieve one pixel. This is much more efficient.
(AdaptiveThresholdImage): Don`t process opacity channel unless
image has one.
(BlurImage): Don`t process opacity channel unless image has one.
2008-11-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/profile.c (ProfileImage): +profile now supports a simple
exclusion syntax. For example, to strip all of the profiles
except for the ICM profile use +profile '!icm,*'. The new syntax
also allows multiple profile names to be listed at once. The
primary requirement is that all excluded profiles must be listed
prior to those to be stripped.
2008-11-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/transform.c (RollImage): Remove image storage class
alteration.
(CompositeImageRegion): Ensure that the canvas image storage class
is correct.
2008-11-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* config/delegates.mgk.in: Since we removed support for `spawn` a
long time ago, and no longer execute using the Unix shell by
default, we need to add an ampersand to the end of the two entries
previously using `spawn` so that the display program does not hang
when it invokes the external program.
* utilities/Makefile.am (UTILITIES_TESTS): Add preview-based
tests.
* coders/preview.c (WritePreviewImage): Solarize requires a
threshold argument.
* coders/vid.c (WriteVIDImage): Eliminate memory leak.
* magick/montage.c (MontageImages): Fix continued use of freed
memory.
2008-11-18 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/omp_data_view.c (AccessThreadViewDataById): New function
to allow retrieving data via the index it was registered with.
* magick/enhance.c (BuildChannelHistograms): EnhanceImage() and
NormalizeImage() now share one common function for generating the
histogram.
* magick/enhance.c (ModulateImage): Improve performance a bit.
(ContrastImage): Improve performance a bit.
(GammaImage): Improve performance a bit.
2008-11-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www/authors.rst: List Mark Mitchell as an author.
* utilities/tests/msl_composite.sh: Fix `rm -f` without a valid
argument which annoyed NetBSD.
* coders/fits.c: Impose a limit on the length of the row PDU.
Make sure that GraphicsMagick version information does not
overflow the length allowed by a row PDU.
2008-11-16 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/jpeg.c (WriteJPEGImage): Use DCT algorithm default from
the library rather than the header file.
* magick: Adjust OpenMP scheduling options based on observed
behavior.
2008-11-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/shear.c (IntegralRotateImage): Added OpenMP acceleration
for rotate by 90 and 270 degrees.
* configure.ac: New --disable-openmp-slow configure for disabling
use of OpenMP for algorithms which may run slower on operating
systems with crummy thread libraries. This still allows gaining
the benefits from OpenMP for CPU hogs. Verified to help with
FreeBSD 7.0 and Apple OS-X Leopard.
* magick/semaphore.c: Trimmed out the debug code in order to
obtain a bit more performance.
2008-11-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/jpeg.c: Allow the user to specify the DCT method
(jpeg:dct-method), or if huffman encoding should be enabled
(jpeg:optimize-coding=true). Default the DCT method to the
libjpeg default rather than forcing it to JDCT_FLOAT since float
is slower on some systems.
2008-11-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/jp2.c (BlobClose): Leak a little bit less memory when
reading a JP2 file.
2008-11-11 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* wand/wandtest.c: Eliminate memory leak.
* wand/drawing_wand.c (DestroyDrawingWand): Eliminate memory
leaks.
* coders/xwd.c (WriteXWDImage): Force colormapped images with more
than 256 colors to DirectClass.
* magick/enhance.c (ModulateImage): Improve progress message.
* coders/msl.c: Eliminate memory leaks.
* GraphicsMagick.spec.in: Apply RPM spec file fixes from Giacomo
Tenaglia for Red Hat Linux 4.
2008-11-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/msl.c: Fix bug with attributes becoming appended to
themselves. Resolves SF issue 2255754. Reflowed code.
2008-11-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* version.sh: GraphicsMagick 1.3 released.
Next release on head will be 1.4.
* www/OpenMP.rst: Updated with latest measurement data.
* www/benchmarks.rst: Updated with latest benchmark data.
* coders/url.c (RegisterURLImage): Register HTTP and FTP URL
support in the "unstable" category since these are capable of
accessing the network and therefore represent a potential security
issue. Register the FILE URL support in the "stable" category
since it is capable of incorporating local disk files, which may
still represent a security security issue for server applications.
Note that disabling these functions might cause some existing MSL,
MVG and SVG scripts to stop working if they use external URLs.
2008-11-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/pnm.c (ReadPNMImage): Sequential multi-thread the PNM raw
format readers. Can improve read performance quite substantially
for large PBM and PGM files, and less so for PPM. There is most
benefit for systems with more I/O than one CPU core will support.
Systems with slow I/O and a relatively fast CPU may see somewhat
diminished read performance with more CPU consumption. As such,
this is effectively a verification that multi-threading the reader
is possible, and may be of benefit to power-users.
* magick/omp_data_view.c (AllocateThreadViewDataArray): New
function to allocate a thread view data array. Updated modules
using similar code to use this function in order eliminate
useless redundancy.
2008-11-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c: Incorporate OMP thread views into the
pixel cache so usage is less invasive. Update OMP-enhanced source
modules to suit.
(GetImagePixelsEx): New function similar to GetImagePixels()
except that it reports exceptions to a user-provided structure.
(SetImagePixelsEx): New function similar to SetImagePixels()
except that it reports exceptions to a user-provided structure.
(SyncImagePixelsEx): New function similar to SyncImagePixels()
except that it reports exceptions to a user-provided structure.
(AccessImmutableIndexes): New function to access read-only
colormap indexes.
(AccessMutableIndexes): New function to access writeable colormap
indexes.
(AccessMutablePixels): New function to access writeable pixels.
(AccessDefaultCacheView): New function to access the default cache
view.
2008-11-05 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (BenchmarkImageCommand): With no other
arguments, the benchmark command now defaults to one iteration.
* magick/effect.c (SpreadImage): Offsets array size is a prime
number to help avoid beating.
(SpreadImage): Ensure that spread loops are always terminal.
* magick/utility.c (MagickRandReentrant): Fix bug where rand() was
being continually re-seeded if rand_r() was not available.
2008-11-04 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* utilities/tests/msl_composite.sh: Replace SVG image generation
with simpler approach which properly centers the text. Use our
own font so that tests will pass if the user does not have fonts
installed.
* magick/utility.c (GetMagickDimension): Extend to support parsing
optional x and y offset values and use to fix parsing for
-oil-paint and -unsharp when sscanf() is C'99 compliant.
2008-11-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.h (AcquireOneCacheViewPixel): Pass pixel to
update by reference.
(AcquireOnePixelByReference): New private inline method which
passes pixel to update by reference.
* magick/omp_thread_view.h (AcquireOneThreadViewPixel): Pass pixel
to update by reference.
* magick/alpha_composite.h (BlendCompositePixel): Replace
BlendComposite with BlendCompositePixel, which passes the
composite pixel by reference.
(AlphaCompositePixel): Replace AlphaComposite with
AlphaCompositePixel, which passes the composite pixel by
reference.
(AtopCompositePixel): Replace AtopComposite with
AtopCompositePixel, which passes the composite pixel by reference.
* configure.ac: With excessive maintenance releases, the library
age portion of MAGICK_LIB_VERSION was overflowing its allotted
space. This resulted in 1.1.X releases reporting the wrong
MagickLibVersion as of 1.1.10. Fix this by supporting up to 99
values for each field.
2008-11-02 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Fix passing the --with-windows-font-dir option via
DISTCHECK_CONFIG_FLAGS.
* utilities/tests/msl_composite.sh: Integrated MSL composition
test script contributed by Max Hohenegger, Max at hohenegger.eu.
* magick/command.c (ConjureImageCommand): Return status was
inverted so one was returned for command success rather than zero.
2008-11-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* png: Updated libpng to 1.2.33 release.
* magick/color.c (FuzzyColorMatch): If fuzz is zero then
completely use the result of ColorMatch() rather than entering
unnecessary expensive code.
2008-10-31 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/studio.h: Make sure we don't conflict with OpenMP
implementation if it is active but we are not using it.
2008-10-30 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/studio.h (HAVE_OPENMP): Add logic to make sure that
OpenMP is only engaged for OpenMP 2.0 or later.
* magick/command.c (VersionCommand): Report OpenMP version.
* Makefile.am: The Magick++ build was supposed to be optional. Now
it is.
* Makefile.am: Eliminated .tar.bz2 and .zip packages from the
distribution. The .tar.bz2 package was hardly smaller than the
.tar.gz package so it wasted 5.9MB with little benefit. The
compression ratio on the .zip archives is absolutely terrible so
eliminating zip eliminates huge 9.6MB and 25MB files from the
distribution equation. Windows users can easily learn how to use
the vastly more efficient 7-Zip format.
2008-10-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Rationalize OpenMP tests to make sure that OpenMP
can not be enabled without thread support.
2008-10-28 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/composite.c (CompositeImageRegion): Add some minimal
region limit checking. Not completed yet.
* magick/transform.c (RollImage): Accellerate using OpenMP.
2008-10-27 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/studio.h (omp_get_thread_num): Remove spurious trailing
`;`.
* magick/render.c (DrawPrimitive): Make method private since
nothing else is using it.
* magick/omp_thread_view.h (AccessThreadView): Inline function for
a bit more performance.
(AcquireOneThreadViewPixel) Inline function for a bit more
performance.
2008-10-26 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* pragma omp parallel for: Use consistent static scheduling
throughout and ensure that 64 threads can be usefully engaged on a
1024 row image.
* magick/pixel_iterator.c (SetRegionThreads): Implement logic so
that pixel iterators execute single-threaded when invoked on tiny
regions.
* magick/pixel_cache.c (SetNexus): Make staging buffer memset()
conditional in order to dramatically diminish impact to small
accesses. This memset() only exists to make valgrind happy.
2008-10-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (ReadTIFFImage): Fix progress monitor for the case
of reading planar stripped images.
2008-10-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (DespeckleImage): Accelerate using OpenMP.
* magick/paint.c (OpaqueImage): Update to use pixel iterators.
(TransparentImage): Update to use pixel iterators.
* magick/decorate.c (FrameImage): Accelerate using OpenMP.
(RaiseImage): Accelerate using OpenMP.
2008-10-22 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/composite.c (CompositeImageRegion): Start of new function
to act as a lighter-weight yet more flexible image composition
interface.
* magick/transform.c (ChopImage): Accelerate using OpenMP.
(CropImage): Accelerate using OpenMP.
(FlipImage): Accelerate using OpenMP.
(FlopImage): Accelerate using OpenMP.
* magick/effect.c (ThresholdImage): Accelerate using OpenMP.
2008-10-21 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c (AcquireOneCacheViewPixel): Optimize
implementation.
* magick/effect.c (MedianFilterImage): Accelerate using OpenMP.
(ReduceNoiseImage): Accelerate using OpenMP.
2008-10-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/fx.c (WaveImage): Accelerate using OpenMP.
(SwirlImage): Accelerate using OpenMP.
(ImplodeImage): Accelerate using OpenMP.
2008-10-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c (GetCacheViewRegion): New function to
return the region bounded by a pixel cache view.
* magick/constitute.c (ExportViewPixelArea): New function to
support exporting the pixels from a pixel cache view.
(ImportViewPixelArea): New function to support importing pixels
to a pixel cache view.
* magick/pixel_cache.c (ReadStream): Eliminated function.
(WriteStream): Eliminated function.
(ClonePixelCacheMethods): Eliminated function.
* magick/image.h: Eliminated StreamHandler call-back type.
Eliminated ImageInfo stream member.
* magick/pixel_cache.c (GetCacheViewArea): New function to return
the area of a cache view.
(AccessCacheViewPixels): New function to access already selected
cache view pixels.
2008-10-19 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c: Remove unused exponential data.
2008-10-16 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/omp_thread_view.c: Move OMP Thread View functions out of
pixel cache module and put them in this new module.
* coders/xtrn.c (ReadXTRNImage): XTRNSTREAM mode was never
implemented so remove unfinished stub code.
2008-10-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (SetImageDepth): Needed to assign image depth
attribute to user-specified depth rather than only altering the
pixels.
(SetImageOpacity): Reimplement using pixel iterators.
(AverageImages): Accelerate using OpenMP.
(GetImageBoundingBox): Accelerate using OpenMP.
2008-10-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/constitute.c (ConstituteTextureImage): Accelerate using
OpenMP.
* magick/image.c (TextureImage): Accelerate using OpenMP.
* magick/render.c (DrawAffineImage): Accelerate using OpenMP.
2008-10-13 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c Fixed palette problem for >8 bit images.
2008-10-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (MogrifyImage): Using +page now resets image
page offsets as documented for convert and mogrify.
2008-10-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (GradientImage): Re-do OpenMP accelleration based
on new pixel cache interface for better performance.
* coders/dpx.c (ReadDPXImage): Progress monitor needs to tick when
row count is updated.
* coders/fits.c (ReadFITSImage): Update to use
MagickFindRawImageMinMax().
(WriteFITSImage): Expand buffer size to MaxTextExtent. Include
GraphicsMagick version in FITS header.
* coders/mat.c (ReadMATImage): Update to use
MagickFindRawImageMinMax().
* magick/constitute.c (MagickFindRawImageMinMax): New internal
function to assist with finding the minimum and maximum data of
raw image files.
2008-10-11 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c (AcquireThreadViewPixels): Convert thread
set view convenience methods into library methods because the
inline methods were causing the Sun Studio compiler to produce
thread unsafe code. Due to likely beneficial inlining in the
library, this is not expected to cause any performance impact.
2008-10-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* PerlMagick/t/filter.t: Add a test for UnsharpMask.
* magick/effect.c (UnsharpMaskImage): Use Blur rather than
GaussianBlur to create blur image since it is faster.
* magick/pixel_cache.c (AllocateThreadViewDataSet): Add a
destructor function in case data should not be destroyed, or needs
something other than MagickFree().
(AllocateThreadViewDataSet): Use user-provided destructor to free
user data.
* scripts/format_c_api_doc.py: Improvements from Mark Mitchell to
perform keyword/target substitions and wrap function prototypes.
* coders/dpx.c (ReadDPXImage): Accellerate reader using OpenMP.
2008-10-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www/api/types.rst: Convert types.html to reStructured text
format.
2008-10-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/monitor.c (MagickMonitorFormatted): New method to support
issuing a formatted progress monitor message. Use it throughout
so that file name is included in progress indication.
2008-10-06 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Bootstrap with autoconf 2.63. Require autoconf
2.62 to bootstrap.
2008-10-05 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www: Adopted improved web page design by Mark Mitchell.
2008-10-04 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c coders/mat.c Used a same piece of code to calculate
min and max data value.
2008-09-30 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c Fixed 16 bit fits writer that wrote wrongly
shaped unsigned ints.
2008-09-30 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* doc/conjure.imdoc: Applied patches from Max at hohenegger.eu to
mention previously undocumented elements and to provide a
composition example.
2008-09-28 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/shear.c (IntegralRotateImage): Accelerate rotation by 0
and 180 degrees using OpenMP.
(XShearImage): Accellerate using OpenMP (accellerates -rotate and
-shear).
(YShearImage): Accellerate using OpenMP (accellerates -rotate and
-shear).
2008-09-27 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (MotionBlurImage): Enable OpenMP now that pixel
cache is re-entrant.
* magick/pixel_iterator.c: Updated to use thread view convenience
inline methods as proof of principle.
* magick/pixel_cache.h: Added convenience inline methods to make
use of thread views a bit more pleasant.
2008-09-26 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (ShadeImage): Fix valgrind gripe.
(MedianFilterImage): Fix valgrind gripe.
2008-09-25 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c: Pixel cache is believed to be thread safe
now.
* magick/deprecate.c (AcquireCacheView): Deprecate this function.
(GetCacheView): Deprecate this function.
(SetCacheView): Deprecate this function.
(SyncCacheView): Deprecate this function.
* magick/pixel_cache.c (AcquireCacheViewPixels): New function to
replace AcquireCacheView().
(GetCacheViewPixels): New function to replace GetCacheView().
(SetCacheViewPixels): New function to replace SetCacheView().
(SyncCacheViewPixels): New function to replace SyncCacheView().
* coders/msl.c: Applied patches from Max at hohenegger.eu which
fix a MSL parsing error related to gamma, and erroneous text
comments which claim that elements can't have attributes.
2008-09-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/resize.c (ResizeImage): Move OpenMP instrumentation to
outer loop so that eventually there can be more performance.
2008-09-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/resize.c (MinifyImage): Accelerate using OpenMP.
* magick/command.c (ConvertImageCommand, MogrifyImageCommand):
Accept -gaussian-blur as a synonym for -gaussian.
(ConvertImageCommand, MogrifyImageCommand): Provide access to
MinifyImage() via -minify.
(ConvertImageCommand, MogrifyImageCommand): Provide access to
Magnifyimage() via -magnify.
2008-09-16 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/channel.c (ImportImageChannelsMasked): New function to
import all the channels from an image except for the channels
specified.
* magick/effect.c (AddNoiseImageChannel): New function to add
noise to an image channel.
(BlurImageChannel): New function to blur one image channel.
(GaussianBlurImageChannel): New function to gaussian blur an image
channel.
(UnsharpMaskImageChannel): New function to unsharpmask an image
channel.
(SharpenImageChannel): New function to sharpen an image channel.
2008-09-15 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (MotionBlurImage): Use GetOptimalKernelWidth1D()
to estimate a reasonable convolution kernel size. Prepare code
for OpenMP but don't enable OpenMP until it runs faster.
(AddNoiseImageChannel): New function to apply noise to a specified
image channel.
2008-09-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (ConvertImageCommand): Provide `convert` access
to MotionBlurImage() via -motion-blur option.
(MogrifyImageCommand): Provide `mogrify` access to
MotionBlurImage() via -motion-blur option.
2008-09-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (SpreadImage): Accelerate using OpenMP.
* coders/msl.c: Applied MSL patch from graphicsmagick-bugs list to
correct handling of geometry x,y values by setting gravity
attribute to ForgetGravity.
2008-09-11 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (ShadeImage): Accelerate using OpenMP.
2008-09-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (RandomChannelThresholdImage): Accelerate using
OpenMP. Support individual thresholding of the color channels.
(BlurImage): Blur was failing for PseudoClass images. This bug
was added on 2008-09-08.
* magick/pixel_cache.c (AcquireOneCacheViewPixel): New function to
return just one pixel from a cache view.
2008-09-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (EnhanceImage): Accelerate using OpenMP.
(BlurImageScanlines): Added optimizations.
* magick/shear.c (IntegralRotateImage): Add missing progress
indication for 90 and 270 degrees rotation.
* www/perl.html: Fix formatting of examples. Should address
SourceForge issue [ 2100339 ] "Wrong format in example script on
web page".
2008-09-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (BlurImage): Accelerate using OpenMP.
2008-09-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/fx.c (ColorizeImage): Re-implement using pixel iterators.
(MorphImages): Re-implement using pixel iterators.
(OilPaintImage): Accelerate using OpenMP.
(SolarizeImage): Re-implement using pixel iterators.
2008-09-06 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/fx.c (ConvolveImage): Accelerate using OpenMP.
* magick/effect.c (AdaptiveThresholdImage): Accelerate using OpenMP.
2008-09-05 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_cache.c: Exhuastive study of the pixel cache code
reveals that it is inscrutable and not implemented in a fashion
which enables useful multi-threading. Therefore, the cache view
interfaces are now made OpenMP-safe via a global critical section.
2008-09-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_iterator.c: Reduce use of critical sections around
pixel cache to the bare minimum based on analysis and testing.
Unfortunately, testing shows that the pixel cache views are still
not 100% thread safe so the extra locking is still required.
* magick/pixel_cache.c (ModifyCache): Make implementation thread
safe. This required removing a thread-unsafe optimization from
Bill Radcliffe.
* magick/command.c (BenchmarkImageCommand): Restore original
client name for each loop so that it is not extended further for
each iteration.
* magick/semaphore.c (UnlockSemaphoreInfo): Decrement lock depth
under protection of the lock.
2008-09-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (AddNoiseImagePixels): Update to pass per-thread
`seed` value for more performance.
2008-08-28 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/gem.c (GenerateDifferentialNoise): Use
MagickRandReentrant(). Added a `seed` argument so that we can pass
a per-thread `seed` value.
* magick/utility.c (MagickRandNewSeed): New function to produce a
semi-random `seed` value.
(MagickRandReentrant): New function which works like rand() but
attempts to be re-entrant if possible by allowing a seed value to
be passed.
2008-08-27 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/channel.c (SetImageChannelDepth): Re-implement using
QuantumOperatorImage().
* magick/image.c (SetImageDepth): Re-implement using
QuantumOperatorImage().
* magick/operator.h (QuantumOperator): Added DepthQuantumOp for
setting the channel depth.
* magick/command.c (BenchmarkImageCommand): Add CPU-based
iteration rate metric to benchmark output.
* magick/resource.c (ListMagickResourceInfo): Include quantum
depth, bits per pixel, and process address size in resource
output so that output is more complete.
2008-08-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (SyncImage): Re-implement using pixel iterators.
(SortColormapByIntensity): Re-implement using pixel iterators.
(ClipPathImage): Re-implement using pixel iterators.
(CycleColormapImage): Re-implement using pixel iterators.
(GetImageDepth): Re-implement using pixel iterators.
(GradientImage): Parallize inner loop for speedup with larger
images.
(ReplaceImageColormap): Re-implement using pixel iterators.
(SetImage): Re-implement using pixel iterators.
2008-08-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/operator.c (QuantumGamma): Removed unnecessary OpenMP
request on inner loops.
* magick/enhance.c (EqualizeImage,NormalizeImage): Execute
histogram generation pixel iterator with just one thread to
decrease contention for the histogram array.
* magick/pixel_iterator.c (InitializePixelIteratorOptions): New
function to initialize PixelIteratorOptions with defaults.
* magick/pixel_iterator.h (PixelIteratorOptions): New structure to
support passing pixel iterator execution options.
2008-08-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* NEWS.txt: Updated for changes to date in 1.3 development code.
* magick/pixel_iterator.c: Execute pixel iterators in parallel via
OpenMP.
* magick/pixel_cache.c (OpenCacheView): Ensure that pixel cache is
open.
(GetCacheInfo): Allocate semaphore immediately.
2008-08-16 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/fits.c Writer now creates valid images according to
http://fits.gsfc.nasa.gov/fits_verify.html
Fixed problems: 1) zeros in HDU, 2) wrong padding. 3) possible
strlen() overflow.
2008-08-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/{compare.c, channel.c, enhance.c, image.c, operator.c}:
Update existing pixel iterator callback functions so that they are
OpenMP safe.
2008-08-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/compare.c (InitializeDifferenceImageOptions): Renamed
from DifferenceImageOptionsDefaults().
(InitializeDifferenceStatistics): New function to initialize
DifferenceStatistics.
(ComputeAbsoluteError, ComputePeakAbsoluteError,
ComputeSquaredError): Use local totalizing structure on stack and
update cumulative statistics when the loop terminates.
2008-08-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www: Convert HTML pages to use a vibrant green theme rather than
colors stolen from old GIMP web site.
2008-08-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* doc/{compare.imdoc, options.imdoc}: Added documentation for
`compare`.
* magick/compare.h (enum HighlightStyle): Added
AssignHighlightStyle for simple color assignment. `Annotate` is
now `Tint`.
* magick/command.c (CompareImageCommand): Useful options are now
-metric, -highlight-color, and -hightlight-style.
2008-08-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/compare.c (DifferenceImagePixels): Fixed `Annotate`
difference annotation algorithm. Added `Threshold` and `Xor`
difference annotation algorithms.
(GetImageChannelDifference): New function for computing
statistical image error using various metrics. Inspired by
`imgcmp` from Jasper.
(GetImageChannelDistortion): New function for obtaining
statistical image error using various metrics for a specified
image channel. Signature is compatible with similar ImageMagick
function.
(GetImageDistortion): New function for obtaining statistical image
error using various metrics for all the active channels in the
image. Signature is compatible with similar ImageMagick function.
* magick/command.c (CompareImageCommand): Added a `compare`
subcommand which compares two images using various metrics, and/or
generates a difference image using various difference annotation
algorithms. Documentation not yet updated.
2008-08-05 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_iterator.c: Split user context in all pixel
iterator APIs into a mutable data part, and an immutable data
part. This required modification to all modules using the pixel
iterator methods.
2008-07-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* wand/magick_wand.c (MagickCompareImageChannels): Use
DifferenceImage().
(MagickCompareImages): Implement by calling
MagickCompareImageChannels().
* magick/compare.c (DifferenceImage): The ImageMagick-compatible
CompareImages() function signature was clearly an example of bad
design so rename CompareImages() to DifferenceImage() with a
signature which does not unnecessarily mix functionality and
allows for ease of future expansion.
2008-07-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* wand/Makefile.am (WAND_TESTS): Added Wand drawtest and wandtest
to automated test suite.
2008-07-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (ThresholdImage): Don't read uninitialized pixel
indexes (valgrind gripe).
* coders/tiff.c (CompressionSupported): Use
TIFFIsCODECConfigured() to test if a codec is supported.
* tests/{rwblob.c, rwfile.c}: use DestroyImageList() rather than
DestroyImage().
* coders/psd.c (RegisterPSDImage): Fix module registration memory leak.
* coders/jpeg.c (RegisterJPEGImage): Fix module registration memory leak.
2008-07-18 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/blob.c (DestroyBlob, DestroyBlobInfo): Implementation is
a bit more robust.
2008-07-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/jpeg.c (ReadJPEGImage): Remove over-write of
image->client_data. Resolves SourceForge issue [ 2018974 ]
client_data is not passed to streamhandler.
* coders/png.c (WriteOnePNGImage): Fix crash when writing PNG
images with transparency and either type Optimize is requested, or
the image is colormapped.
2008-07-12 Fojtik Jaroslav <JaFojtik@seznam.cz>
* coders/mat.c Fixed problem: "In this case, the referenced
images had previously been deallocated but are still being used.
Since they are overwritten, their signatures are invalid.
2008-07-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/dcm.c (ReadDCMImage): Report actual image depth.
* magick/resource.c (InitializeMagickResources): Set default
maximum memory limit to physical memory rather than 2X physical
memory. This decision is made since the system paging device is
often slower than files in the filesystem, and so memory mapping
is likely faster.
* magick/blob.c (OpenBlob): The MAGICK_IO_FSYNC environment
variable causes output files to be synchronized to disk when set
to TRUE.
2008-07-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www/GraphicsMagick.html: Improved formatting of documentation.
2008-07-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (SetImageInfo): Make use of the new
`extension_treatment` field.
* coders/dcraw.c (ReadDCRAWImage): Added a coder module to proxy
from various common RAW camera format extensions to the `dcraw`
delegate.
* magick/magick.h (MagickInfo): Add an extension_treatment member
to indicate how file extensions should be treated for this coder.
2008-06-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/{animate.c,quantize.c}: Replace !ColorMatch() with
NotColorMatch().
* utilities/Makefile.am (install-exec-local-utilities): Add back
in support for --enable-magick-compat which was accidentally
dropped in the new makefiles for GraphicsMagick 1.2. Resolves
SourceForge bug 2005883.
* magick/color.h (NotColorMatch): New macro for testing that two
colors are not the same. Opposite from existing ColorMatch().
* magick/command.c: Replaced the many duplicate enum conversion
code fragments with calls to functions in enum_strings.c.
* magick/enum_strings.c: Absorbed the many "ToString" and
"StringTo" functions from other source modules.
* magick/effect.c (ThresholdImage): Optimize for larger images.
* magick/constitute.c (ConstituteTextureImage): New function to
return a texture canvas image based on a tile image. Similar to
existing TextureImage() except better optimized for creating new
images and inherits tile image properties.
* magick/color.h (IsBlackPixel): New macro to test if a pixel is
black.
(IsWhitePixel): New macro to test if a pixel is white.
* coders/tile.c (ReadTILEImage): Use new ConstituteTextureImage()
function rather than TextureImage(). Also allow the user to
request a particular image type.
* coders/pdf.c (Huffman2DEncodeImage): Explicitly request a strip
per page when writing Group4 TIFF.
* coders/tiff.c (WriteTIFFImage): Place a generous default limit
on rows-per-strip when using Group3 or Group4 FAX compression.
The default limit is added since it is observed that the Group4
compressor fails with extremely huge strips. Added a define
"tiff:rows-per-strip" to allow the user to explicitly set the rows
per strip. Added a define "tiff:strip-per-page=true" to allow the
user to force one strip per page no matter what. Added progress
monitor support to tile writer.
2008-06-25 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* VisualMagick/configure/configure.cpp: The MAT coder now depends
on zlib so add explicit dependencies for it.
* wand/magick_wand.c (MagickNegateImage): Implemented previously
unimplemented Wand method.
(MagickGammaImageChannel): Implemented previously unimplemented
Wand method.
* magick/operator.h (enum QuantumOperator): Added GammaQuantumOp
and "gamma" operator. Renamed InvertQuantumOp to NegateQuantumOp.
2008-06-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/operator.h (enum QuantumOperator): Added InvertQuantumOp
and "invert" operator.
* coders/xcf.c (GIMPBlendModeToCompositeOperator): For XCF format,
we do support GIMP_DIVIDE_MODE composition now. Disable progress
monitor during tile composition.
* magick/composite.c (DivideCompositePixels): New Divide composite
operator contributed by Michael Burian <michael.burian@sbg.at>.
* magick/image.h (enum CompositeOperator): Added DivideCompositeOp.
* magick/enum_strings.c (CompositeOperatorToString): New function
to convert a composite operator to a string.
(StringToCompositeOperator): New function to convert a string to a
composite operator.
2008-06-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* wand/magick_wand.c (MagickThresholdImageChannel): Implement
previously unimplemented Wand function.
(MagickGetImageExtrema): Implement previously unimplemented Wand
function.
(MagickGetImageChannelExtrema): Implement previously unimplemented
Wand function.
(MagickQueryFonts): Implement previously unimplemented Wand
function.
2008-06-22 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* scripts/format_c_api_docs: Scan compare.c for API definitions.
* wand/magick_wand.c (MagickCompareImageChannels): Enable use of
this function.
(MagickCompareImages): Enable use of this function.
* magick/compare.c: New source file.
(IsImagesEqual): Move here from magick/image.c.
(CompareImageChannels): Initial implementation of function roughly
similar to the one in ImageMagick.
(CompareImages): Initial implementation of function roughly
similar to the one in ImageMagick.
* magick/pixel_iterator.c (PixelIterateTripleModify): New pixel
iterator function to access two images as read-only and one as
read-write for updating existing pixels.
(PixelIterateTripleNew): New pixel iterator function to access two
images as read-only and one as read-write for creating new pixels.
2008-06-22 Fojtik Jaroslav <JaFojtik@seznam.cz>
* mat.c Added CloseBlob().
2008-06-21 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* wand/magick_wand.c (MagickSetImageFormat): Add method to support
setting the image format.
2008-06-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/profile.c (ProfileImage): Convert to use pixel iterators.
2008-06-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/channel.c (ImportImageChannel): Convert to use pixel
iterators.
(SetImageChannelDepth): Convert to use pixel
iterators.
* Magick++/lib/Image.cpp (quantize): Error measurement support was
being performed incorrectly. SyncImage() is not needed here.
2008-06-18 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/channel.c (GetImageChannelDepth): Convert to use pixel
iterators.
2008-06-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/mat.c (RegisterMATImage): Set blob support to false for
MAT coder until bug related to blobs is fixed.
2008-06-16 Fojtik Jaroslav <JaFojtik@seznam.cz>
* mat.c Ability to read a new compressed MATLAB image format.
2008-06-15 Fojtik Jaroslav <JaFojtik@seznam.cz>
* mat.c, wpg.c: For empty images a message ImageFileDoesNotContainAnyImageData
is returned.
2008-06-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/channel.c (ChannelImage): Convert to use pixel iterators.
(ExportImageChannel): Convert to use pixel iterators.
* coders/dpx.c (WriteDPXImage): As an experimental feature, when
the environment variable MAGICK_RESERVE_STORAGE is set to "TRUE",
then the DPX format writer will request the required storage from
the filesystem in advance (if supported by the OS) or the full
amount of memory required (when writing to an in-memory BLOB).
2008-06-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/magic.c (InitializeMagicInfo): New function to initialize
file format detection.
(GetMagickFileFormat): New internal implementation function to
detect file format based on file header.
(GetMagicInfo): This internal implementation function is eliminated.
(MagicInfo): MagickInfo structure is now private to the
implementation.
2008-06-11 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/magick.c (ListMagickInfo): Replace "blob support"
indication with the coder stability classification.
(RegisterMagickInfo): Pay attention to coder classification.
* magick/magick.h (MagickInfo): Added a coder stability
classification field as well as the MAGICK_CODER_STABILITY
environment variable to choose which coders are enabled.
2008-06-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (GetImageCharacteristics): Don't access image
pixels if they are not defined yet.
* coders/{avi.c,avs.c,dcm.c,ept.c,fits.c,mtv.c,palm.c,rla.c,tga.c}:
Readers are now much more robust when faced with reading random files.
2008-06-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (SetImageInfo): Exclude all virtual delegates and
coders for pseudo-formats.
2008-06-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/dcm.c (ReadDCMImage): Make DCM reader quit immediately on
EOF condition.
* coders/avi.c (ReadAVIImage): Make AVI reader more robust at
rejecting bad files.
* configure.ac: Eliminated --enable-delegate-build option that I
have not used or tested for almost ten years so it probably did
not work anyway. Use --with-ttf=/prefix to specify the the
installation prefix for freetype. Use
--with-ttf=/prefix/bin/freetype-config to specify the whole path
to freetype-config.
2008-06-04 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (MogrifyImage): Add support for
-black-threshold and -white-threshold.
* magick/image.h (enum ChannelType): Added GrayChannel
enumeration.
* magick/operator.c (QuantumOperatorImageMultivalue): New
implementation function to make creating legacy functions like
black/white thresholding easier.
* wand/magick_wand.c (MagickBlackThresholdImage): Implemented.
(MagickWhiteThresholdImage): Implemented.
* magick/effect.c (BlackThresholdImage): Implemented a
BlackThresholdImage() which is similar to (but not identical to)
the one in ImageMagick.
(WhiteThresholdImage): Implemented a WhiteThresholdImage() which
is similar to (but not identical to) the one in ImageMagick.
2008-06-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/operator.c: Added support for additional channel
operators (-operator) for applying noise to one or more channels.
The additional operators are Noise-Gaussian, Noise-Impulse,
Noise-Laplacian, Noise-Multiplicative, Noise-Poisson, and
Noise-Uniform. The amount of noise applied is controlled via the
numeric argument, which can specify the percentage of noise to
apply.
* magick/enum_strings.c: New source module to contain the various
EnumToString() and StringToEnum() functions which seem to multiply
like bunny-rabbits.
* magick/gem.c (GenerateNoise): Poisson noise generation was
taking excessively long and producing wrong results. Noise
generation was only producing the correct amount of noise in the
Q8 build.
(GenerateDifferentialNoise): New function to return noise in a
floating-point differential format.
2008-06-02 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/pixel_iterator.h: Removed x,y coordinate information from
all of the callback definitions since a use for this information
has yet to be found.
* magick/composite.c (CompositeImage): Use individual callback
functions for the composition operations.
* coders/xcf.c (ReadXCFImage): Deal with grayscale images the
GraphicsMagick-way.
2008-06-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/xcf.c (ReadXCFImage): Validate XCF file data so that
corrupted files don't crash GraphicsMagick.
2008-05-30 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/dpx.c (ReadDPXImage): Incrementally read user data
part and check for EOF so that bogus files are rejected quickly.
* coders/cineon.c (ReadCINEONImage): Incrementally read user data
part and check for EOF so that bogus files are rejected quickly.
2008-05-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/pict.c (ReadPICTImage): Ensure that row_bytes calculation
does not overflow. Verify that RLE decode does not overflow
buffer. Validate image frame dimensions.
* coders/palm.c (ReadPALMImage): Validate PALM bits per pixel and
colormap indexes.
* magick/resource.c (ListMagickResourceInfo): List controlling
environment variable in `-list resource` output as a configuration
usage reminder.
* coders/pdf.c (ReadPDFImage): Properly deal with reading rotated
PDFs.
2008-05-28 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* FAQ.txt: Added a FAQ for how to extract and combine CMYK image
channels to individual files.
2008-05-27 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/fx.c (ConvolveImage): Eliminate unnecessary "range check"
feature since range checking is not where the CPU time is going.
* magick/effect.c (UnsharpMaskImage): Re-write implementation to
use pixel iterators.
* magick/pixel_iterator.c: Decided that the old per-pixel
iterations were not useful enough to keep since the region-based
ones are working fine. Moved pixel_row_iterator.c to
pixel_iterator.c and renamed functions to remove the `Row`
designation.
* magick/composite.c (CompositeImage): Automatically adjust
colorspace of composite image so that it is compatible with canvas
image.
* magick/alpha_composite.h (AlphaComposite): Fix alpha composite
when both pixels contain transparency.
* PerlMagick/demo/demo.pl: Use segmentation parameters which
are more suitable for our image.
2008-05-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/composite.c (CompositeImage): CMYK copy composition
operators automatically set the image colorspace to CMYK.
* coders/tiff.c (WriteTIFFImage): CMYK must take precedence over
JPEG compression. We don't support JPEG compression in TIFF with
CMYK.
2008-05-22 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (ChannelThresholdImage): Re-implement using
pixel iterators. Support thresholding only the red channel by
eliminating the switch to intensity thresholding if only one
channel parameter is supplied.
* coders/tiff.c (WriteTIFFImage): Don't accidentially convert CMYK
images to RGB.
* magick/composite.c (CompositePixels): Handle CopyBlack properly
for CMYK images.
* magick/command.c (CompositeImageCommand): Support CopyCyan,
CopyMagenta, CopyYellow, and CopyBlack.
* magick/composite.c (CompositeImage): Preserve the canvas image
colorspace.
* doc/options.imdoc: Remove mention of thresholding at the channel
level since this never worked in a useful fashion and now only
simple intensity thresholding is available via -threshold.
* magick/command.c (MogrifyImage): Revert to using ThresholdImage() rather
than ChannelThresholdImage().
* PerlMagick/Magick.xs: Revert to using ThresholdImage() rather
than ChannelThresholdImage().
2008-05-21 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/effect.c (AddNoiseImage): Implemented using pixel
iterators.
* magick/pixel_row_iterator.c (PixelRowIterateDualNew): New pixel
iterator. Similar to existing PixelRowIterateDualModify except
that this one is for when initializing a new image.
2008-05-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/composite.c (CompositeImage): Update image composition to
use pixel iterator methods.
2008-05-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/enhance.c: Re-wrote all enhancement functions in this
module to be based on the pixel iterator methods.
* magick/command.c (ConvertImageCommand, MogrifyImageCommand,
DisplayImageCommand): Gamma multiple channel syntax was broken.
Now it is fixed.
2008-05-18 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/colorspace.c (RGBTransformImage): Optimized lookup table
generation performance to the maximum extent possible.
(TransformRGBImage): Optimized lookup table
generation performance to the maximum extent possible.
* magick/image.h (RoundDoubleToQuantum): New macro to explicitly
safely round a `double` to a Quantum.
(RoundFloatToQuantum): New macro to explicitly safely round a
`float` to a Quantum.
* configure.ac: Add OpenMP support library to LIBS so that
dependent applications will pick up this dependency without
themselves needing to enable OpenMP.
* magick/command.c (CompositeImageList): Don't overwrite matte
flag for CopyOpacity composition.
* magick/composite.c (CompositeImage): CopyOpacity composition
needs the opacity channel to be enabled.
* PerlMagick/Magick.xs: Dissolve composition with Opacity was not
working right. Now it does.
2008-05-16 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/gem.c (HWBTransform): Hue value range was scaled wrong,
leading to clipping.
(TransformHWB): Hue value range was scaled wrong, leading to
clipping.
2008-05-15 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/colorspace.c (RGBTransformImage): Re-implement transform
loops using PixelRowIterateMonoModify() in order to simplify the
code.
2008-05-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/colorspace.c (TransformRGBImage): Re-implement transform
loops using PixelRowIterateMonoModify() in order to simplify the
code.
* magick/{pixel_iterator.h, pixel_row_iterator.h}: Pass pixel
colormap index/indexes to callback functions. Dependent code is
adjusted to match.
2008-05-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (ConvertImageCommand, MogrifyImageCommand,
MogrifyImage): Add command access to the new channel operators.
* magick/operator.c (QuantumOperatorRegionImage): Support the new
channel operators. Update to use PixelRowIterateMonoModify() for
a bit more performance.
* magick/operator.h (enum QuantumOperator): Added new operators
AssignQuantumOp, ThresholdQuantumOp, ThresholdBlackQuantumOp, and
ThresholdWhiteQuantumOp.
2008-05-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (VersionCommand): Report if OpenMP is supported
by the build.
* configure.ac, Makefile.am: Install documentation according to
the conventions established by the configure script. This
installs the documentation under
/usr/local/share/doc/GraphicsMagick by default.
2008-05-11 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* scripts/format_c_api_docs: Add pixel_iterator.c and
pixel_row_iterator.c to API documentation formatter.
* magick/api.h: Include pixel_iterator.h and pixel_row_iterator.h.
* magick/Makefile.am (MAGICK_INCLUDE_HDRS): Formally install
pixel_iterator.h and pixel_row_iterator.h.
* magick/image.c (IsImagesEqual): Update to use
PixelRowIterateDualRead().
(GetImageStatistics): Update to use PixelRowIterateMonoRead().
* magick/pixel_row_iterator.h: New interfaces which are similar to
the already existing interfaces in pixel_iterator.h except that
they pass a row to the callback rather than one pixel.
* magick/operator.c (QuantumOperatorRegionImage): Add progress
monitor support.
* magick/pixel_iterator.c (PixelIterateMonoRead): Add a
`description` argument and progress monitor support.
(PixelIterateMonoModify): Add a
`description` argument and progress monitor support.
(PixelIterateDualRead): Add a
`description` argument and progress monitor support.
(PixelIterateDualModify): Add a
`description` argument and progress monitor support.
* magick/resize.c (HorizontalFilter, VerticalFilter): Switch back
to RoundSignedToQuantum() since some pixels were experiencing
underflow. Localize some variables so that we don't have to
declare them as private for OpenMP.
2008-05-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac, magick/resize.c, PerlMagick/Makefile.PL.in: Added
OpenMP support for parallelizing a task across multiple cores.
2008-05-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac, magick/nt_base.h: Fix using libbz2 under MinGW.
* coders/{msl.c, svg.c, url.c}: Fix compilation with modern
libxml2 under MinGW.
2008-05-08 Josue Andrade Gomes <josuegomes@gmail.com>
* magick/nt_base.h, libxml/include/win32config.h (vsnprintf):
Fixed compilation issue noticed with Visual C++ 2008.
2008-05-05 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/magick.c (GetMagickInfo): Simplify implementation.
(RegisterMagickInfo): Remove any existing entry since module
loading may result in duplicate entries.
2008-05-04 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* libtool: Update to libtool 1.2.4.
* magick/magick.h (MagickInfo): Store string attributes as `const
char *` to statically allocated data rather than as heap allocated
strings. THIS IS AN INTERFACE CHANGE. Using a coder written to
the old interface is non-fatal but may resemble a small memory
leak. The reason for the change is to avoid at least 880 needless
malloc()/strlen()/strlcpy() operations at initialization time, and
at least 880 free() calls at destruction time. While these
operations did not take long, they are still an unnecessary
overhead, which is increased in thread-safe applications.
* magick/module.c (OpenModule): Ignore requests to open modules
which have already been opened.
* GraphicsMagick.spec.in: Add --with-included-ltdl to the default
options since this seems safest until the libltdl validation logic
is fully robust. This should be made user-configurable in the
future.
* magick/Makefile.am (magick_libGraphicsMagick_la_LIBADD): Apply
libltdl dependency argument as required for building.
* configure.ac: Intuit if the GraphicsMagick library will depend
on -lltdl.
* Magick++/bin/GraphicsMagick++-config.in: Use substitutions
rather than invoking GraphicsMagick-config in order to determine
GraphicsMagick library usage requirements. This avoids problems
when GraphicsMagick-config is not in the executable search path.
2008-05-02 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* GraphicsMagick.spec.in: NEWS was renamed to NEWS.txt. Enable
libtool verbose output so it is possible to diagnose build
failures.
2008-05-01 Fojtik Jaroslav <JaFojtik@seznam.cz>
* mat.c: gm convert -limit Pixels 1 input_gray_lsb_16bit.mat crap.miff
don't rotate partial image.
2008-04-30 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/magick.c (DestroyMagickInfoList): Use DestroyMagickInfo().
(UnregisterMagickInfo): Use DestroyMagickInfo().
(RegisterMagickInfo): Simplify dramatically by adding to the front
of the list rather than maintaining alpha order.
* magick/image.c (DestroyImageInfo): Tidy up and simplify code.
* magick/constitute.c (WriteImage): Comment out the "bi-modal
delegate" execution code until we determine what value it offers.
The test suite passes without it.
* magick/magick.h (struct MagickInfo): There is no need for `name`
to be allocated data so make it const.
(DestroyMagickInfo): Add a static function to destroy a MagickInfo
structure. Renamed previous DestroyMagickInfo to
DestroyMagickInfoList and made it static.
2008-04-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* version.sh: GraphicsMagick 1.2 released.
CVS head is now 1.3 development.
* png: Updated libpng to 1.2.27.
2008-04-28 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (SetImageInfo): Ignore file extensions which
match defined virtual delegate entries (including stealth
entries).
2008-04-27 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* BENCHMARKS.txt: Added timings for -blur.
2008-04-27 Darko Kojic <dkc@sf.net>
* magick/effect.c (MedianFilterImage): Fixes to compile on ARM
CPU.
2008-04-26 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/magick.h (MagickInfo): Remove image_info member since I
can not find any purpose for it.
* coders/tiff.c (WriteTIFFImage): Remove assertion check on
scanline size since it has not caught anything.
* magick/image.c (SetImageInfo): Ensure that the file extension
does not trigger unwanted activity such as access to an X11
server, printer, or the launch delegate.
* config/Makefile.am (configshare_DATA): Install colors.mgk in
share path.
* magick/blob.c (GetConfigureBlob): Search `share` config path
prior to `lib` config path.
2008-04-25 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/png.c (WriteOnePNGImage): TrueColor RGB was usually
written rather than the desired more compact format. This is a
first pass at fixing that.
2008-04-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* BENCHMARKS.txt: Added a benchmark summary.
2008-04-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* version.sh: Prepare 1.2beta1 release.
* NEWS.txt: Updated with latest news.
2008-04-22 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* libtool: Update to 1.2965 2008-04-22
* coders/png.c (ReadOneJNGImage): Deal with ReadImage() returning
a NULL pointer when reading JPEG sub-image.
2008-04-21 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/channel.c (ExportImageChannel): Added progress monitor
support.
(SetImageChannelDepth): Added progress monitor support.
(ChannelImage): Don't preserve matte channel when extracting
channel.
* magick/image.c (SetImageOpacity): Avoid integer overflow in Q32
build. Added progress monitor support.
(SyncImage): Added progress monitor support.
(SetImage): Added progress monitor support.
(CycleColormapImage): Added progress monitor support.
(GetImageBoundingBox): Added progress monitor support.
(SortColormapByIntensity): Added progress monitor support.
2008-04-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac, magick/Makefile.am: Don't use libtdl unless we are
supposed to be using it!
* libtool: Updated to GNU libtool 1.2960 2008-04-19.
* configure.ac, magick/delegate.h: It seems that the modern
convention is to store ghostscript headers in a subdirectory
called `ghostscript` rather than `ps`.
We don't actually need Ghostscript errors.h and that is a good
thing since it seems that some newer Ghostscript calls it ierrors.h
2008-04-18 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* VisualMagick/installer/inc/files-dlls.isx: Comment out inclusion
of X11 support DLLs.
* VisualMagick/magick/magick_config.h.in: X11 is no longer in the
default Windows build.
2008-04-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/nt_base.c: Eliminate various annoying warnings noticed
under MinGW.
* magick/spinlock.h (_spinlock_release): Use `long` rather than
`int` in order to eliminate warning under MinGW.
* magick/semaphore.c (spinlock_wait): Use `long` rather than `int`
in order to eliminate warning under MinGW.
* magick/log.c (LogMagickEventList): Eliminate warning under MinGW.
* magick/compress.h: Clean up interface definitions to use
magick_uint8_t for unsigned character data.
* coders/jpeg.c (ReadJPEGImage): Don't use GetPixelCachePresent()
since it is not DLL-exported.
2008-04-15 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/yuv.c (ReadYUVImage): Report exception info correctly.
* coders/xpm.c (ReadXPMImage): Report exception info correctly.
* coders/xc.c (ReadXCImage): Report exception info correctly.
* coders/tiff.c (ReadTIFFImage): Report exception info correctly.
* coders/null.c (ReadNULLImage): Report exception info correctly.
* coders/jpeg.c (ReadJPEGImage): Report exception info correctly.
Use of Huffman optimization is now based on available memory
rather than a hard-coded image size.
* coders/gif.c (ReadGIFImage): Report exception info correctly.
* magick/utility.c (MagickSizeStrToInt64): New function to convert
a size string with optional units suffix to a 64-bit integer.
(MagickStrToInt64): New function to convert a string to a 64-bit
integer, with error checking.
* magick/image.c (SetImage): SetImage now returns error status.
* magick/command.c: Eliminated the long-deprecated -cache resource
limit option.
* magick/resource.c: Complete re-write of the resource limit
system. Resource specifications are now absolute except that they
support a binary metric suffix such as `K` to scale the value.
Added the `Pixels` limit type to limit the maximum number of
pixels allowed for each image.
2008-04-12 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/jpeg.c (WriteJPEGImage): Output grayscale images more
efficiently.
2008-04-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* lcms: Updated lcms to 1.17.
* png: Updated libpng to 1.2.26.
2008-04-09 Glenn Randers-Pehrson <glennrp@simple....>
* coders/png.c (ReadOnePNGImage) Use the low bits of the PNG
tRNS values instead of scaling them when reducing from 16-bits.
2008-04-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Updated to Autoconf 2.62.
2008-04-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (MogrifyImageCommand): New -create-directories
option automatically creates subdirectories as needed when
-output-directory option is used. This is useful when one
directory tree of files is being mogrified to a new tree.
2008-04-07 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/utility.c (MagickCreateDirectoryPath): New function to
create a directory path. Will be used later.
* configure.ac: Tweaks to produce a successful MinGW cross-compile.
2008-04-04 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (WriteTIFFImage): Added a simple sentinel
assertion to hopefully flush out any remaining cases where
ExportImagePixelArea() writes past the end of its buffer.
* magick/constitute.c (ExportImagePixelArea): GrayQuantum case for
DirectClass pixels was sometimes writing a zero byte one past the
end of the allocated buffer. Thanks to Josue Gomes for reporting
this bug.
2008-04-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/{pcd.c,pcx.c,pdb.c,pict.c,stegano.c,wpg.c,xcf.c}:
Warnings reduction.
* magick/{channel.c,image.c,unix_port.c,render.c}: Warnings
reduction.
* coders/mat.c: Convert C99 comments to C89 comments so code can
compile with a C89 compiler.
* coders/tiff.c (WriteTIFFImage): Add an assertion to enforce that
the bytes output to the scanline is no more than the bytes
allocated for the scanline.
* NEWS.txt: Updated with latest NEWS.
2008-04-02 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/pdf.c (WritePDFImage): Default to ZIP compression if
available. Ignore Image compression setting since the useful
value (set by the user) usually comes from ImageInfo.
* coders/png.c (WriteOnePNGImage): Fix progress monitor when
writing PNG.
* magick/channel.c (GetImageChannelDepth): Added progress monitor
support.
* magick/signature.c (SignatureImage): Added progress monitor support.
* magick/image.c (GetImageDepth): Added progress monitor support.
2008-04-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* libtool: Update to libtool 2.2.2.
* coders/jpeg.c: Convert more code to use size_t for sized values
rather than long.
* coders/wpg.c (InsertRow): Fix log format string specification.
* coders/dpx.c (WriteDPXImage): Fix typo in casts.
* coders/fpx.c (ReadFPXImage): Apply FreeBSD patch from Mikhail
Teterin to allow FlashPIX to work better for 64-bit builds.
Addresses SourceForge issue 1824658 "FPX should work again now".
* magick/blob.c (ImageToBlob): Fix typo in cast.
2008-03-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* CONTRIBUTE.txt: Convert contribute.html to reStucturedText
format and generate HTML version from it.
* PROCESS.txt: Convert description of development process to
reStucturedText format and generate HTML version from it.
* INSTALL-windows.txt: Add instructions for how to install from
setup.exe style installer. Also add instructions for how the
distribution package is built.
* Copyright.txt: Reformat in reStucturedText format and generate
HTML version from it.
* VisualMagick/installer/inc/body.isx: No longer include
development headers and libraries in the Windows DLL install
package since they are large and they may only work with the
version of Visual C++ used to perform the build. It is much safer
for the developer to build the package from source with his own
compiler.
2008-03-27 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* Fix compilation issues with Microsoft Visual Studio.
2008-03-26 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/dpx.c (ReadDPXImage, WriteDPXImage): Use lookup tables to
speed up value conversion.
* magick/memory.h (MagickAllocateArray): Renamed from
MagickAllocateMemoryElements.
2008-03-25 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* PerlMagick/Magick.xs: Use memory allocation macros like the rest
of the code.
* magick/memory.c (MagickMalloc): New function which behaves
similar to malloc().
(MagickMallocArray): New function for allocating an array.
(MagickRealloc): New function which behaves similar to realloc().
(MagickFree): New function which behaves similar to free().
(MagickAllocFunctions): New function to allow the user to specify
the memory allocation functions.
* magick/memory.h: New header file to define memory allocation
functions.
* magick/deprecate.c (DeleteImageList, DestroyImages,
GetImageList, GetImageListIndex, GetImageListSize, GetNextImage,
GetNumberScenes, GetPreviousImage, ParseImageGeometry,
PopImageList, PostscriptGeometry, PushImageList,
SetCacheThreshold, SetImageList, ShiftImageList, SizeBlob,
SpliceImageList, UnshiftImageList): Remove functions which were
already deprecated in ImageMagick 5.5.2 or earlier.
2008-03-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/dpx.c (WriteDPXImage): Support writing image which is
already in a YCbCr colorspace.
(ReadDPXImage): Return YCbCr images in YCbCr colorspace unless
they are also Cineon log encoded.
* magick/image.c (CloneImage): Use CloneImageAttributes().
* magick/attribute.c (CloneImageAttributes): New function for
copying image attributes from one image to another.
* magick/utility.c (TranslateTextEx): Check if the pixel cache is
initialized before using a function which requires using it.
Thanks to Michal Kowalczuk for bringing this issue to my
attention.
* magick/attribute.c (SetImageAttribute): Only apply
transformations to "comment" and "label" attributes.
* magick/pixel_cache.c (GetPixelCachePresent): New function to
test if the image pixel cache is present and initialized.
2008-03-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/colorspace.c (RGBTransformPacket): Rationalize casts for
improved performance.
* magick/image.c (GetImageDepth): Use table lookups to improve
performance.
2008-03-16 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (AllocateImage): Transfer any attributes from
ImageInfo to allocated image.
(SetImageDepth): Use table lookups to improve performance.
2008-03-14 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (MogrifyImageCommand): Added an
-output-directory option to `mogrify` to send output files to the
specified directory.
2008-03-11 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* PerlMagick/t/read.t: Add input_logical_lsb_08bit.mat to
PerlMagick tests.
* magick/nt_feature.c (CropImageToHBITMAP, ImageToHBITMAP): Use
GlobalFree() to free bitmap handle.
2008-03-10 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* PerlMagick/t/read.t: Added/adjusted WPG test files from Jaroslav
Fojtik.
2008-03-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* AUTHORS.txt, BUGS.txt, FAQ.txt, NEWS.txt, PLATFORMS.txt,
TODO.txt, INSTALL-unix.txt, INSTALL-windows.txt: Use
reStructuredText format.
* Makefile.am: Use reStructuredText for more files.
2008-02-29 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/constitute.c (ReadImage): Disable colorspace override
code since it was being wrongly-triggered in X11 display commands.
2008-02-23 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* www/body.html: Update to mention 1.1.11 release.
2008-02-20 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/colorspace.c (RndToInt): Cast result to `unsigned int`
rather than `int` in order to avoid possible value truncation with
Q32 build. Problem was reported by Kai-Uwe Behrmann.
(TransformRGBImage): Fix loop iterator which was looping one past
the end of the array. Reported by Kai-Uwe Behrmann.
* magick/command.c: Added a -set option to the composite, convert,
display, mogrify, import commands in order to allow setting an
image attribute.
2008-02-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* PerlMagick/Magick.xs: Use MagickAcquireMemory() rather than
AquireMemory().
* coders/xwd.c (ReadXWDImage): Eliminate integer overflow
vulnerability (IDefense 09.19.07).
* coders/xbm.c (ReadXBMImage): ditto
* coders/xcf.c (ReadXCFImage): ditto
* coders/dib.c (ReadDIBImage): ditto
* coders/dcm.c (ReadDCMImage): ditto
2008-02-09 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (WriteTIFFImage): The RFC 3949 specification for
Internet FAX recommends LSB2MSB fill order so document that.
2008-02-08 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (WriteTIFFImage): Use `-define
tiff:fill-order={msb2lsb|lsb2msb}` to control TIFF bit fill order.
2008-02-06 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Updated to latest CVS libtool.
* coders/tiff.c (CompressionSupported): Use
TIFFGetConfiguredCODECs() to test if a requested compression type
is supported by libtiff. Based on advice from Frank Warmerdam.
* configure.ac: Add test for TIFFGetConfiguredCODECs() in libtiff.
2008-02-05 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c: With libtiff 3.6.1, including tiff.h and tiffio.h
is not sufficient to obtain the definitions from tiffconf.h so
libtiff is assumed to not support any features, such as
compression. Avoid this problem by explicitly including
tiffconf.h if it is found. This resolves SourceForge issue
[1883527] compression of tiff-file has no effect.
2008-02-03 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* VisualMagick/installer/inc/setup.isx: Set Inno Setup installer
compression to "lzma/max".
* PerlMagick/Magick.xs: Eliminate use of memory allocation macros
since these failed miserably under Windows where it seems that
malloc, free, and realloc are redefined via macros by the Perl
build environment. This reverts changes made on 2007-12-01.
* magick/memory.c (MagickAcquireMemoryArray): Use implementation
from the 1.1 branch.
* magick/utility.h: Remove MagickSafeMultiplySize_t since it seems
that use of inline functions in Windows is a disaster area.
2008-02-02 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* Makefile.am (windows-dist): Create a 7z compressed Windows
comprehensive source package. See http://www.7-zip.org/ for
information on Windows 7-Zip and http://p7zip.sourceforge.net/ for
information on portable 7-Zip (P7ZIP).
2008-02-01 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* coders/tiff.c (WriteTIFFImage): Add logging for image resolution
and resolution units.
* magick/version.h.in: Update copyright year to 2008.
2008-02-01 Gary V. Vaughan <gary@gnu.org>
* configure.ac: Updated for libtool-2.1b.
* bootstrap (libtoolize): Libtoolize can figure out the mode and
directory for libltdl from configure.ac.
2008-01-28 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* magick/Makefile.am: Update
magick_libGraphicsMagick_la_DEPENDENCIES to use LTDLDEPS.
2008-01-26 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/image.c (SetImageInfo): Successfully read existing file
names in the form file[123] which were failing to read since they
appear to be a valid sub-image specification.
2008-01-24 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/utility.c (ExpandFilenames): If a filename appears to
contain a wildcard specification, first check to see if there is
file matching the unexpanded wildcard prior to engaging in the
slow task of wildcard expansion. Without this fix, expanding the
command line takes a very long time if there are a huge number of
files in the directory, and some file names appear to contain
wildcard specifications. Inspired by SourceForge bug reports [
1878992 ] "literal square brackets in file name cause large delay"
and [ 1783209 ] "converting runs slowly when subimage is
specified", but this might not be the complete fix for the
problem.
2008-01-22 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* Makefile.am: Update to Automake 1.10.1 and enable generation of
an lzma compressed source package.
2008-01-19 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Added configure option --with-umem to enable use
of the umem memory allocation library available in Solaris 9,
Update 3 and later, or from
https://labs.omniti.com/trac/portableumem/. This library supports
concurrency in multi-threaded programs and supports debugging
memory issues. See
http://developers.sun.com/solaris/articles/libumem_library.html
for a description of how to use the library for debugging memory
issues.
2008-01-17 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (VersionCommand): Include a "Large Memory" item
in the Feature Support list.
* coders/png.c (RegisterPNGImage): Remove reference to dead PNG
ftp site.
* VisualMagick/configure/configure.cpp (InitInstance): Remove
project dependency on dxguid.lib (Direct-X).
2008-01-13 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* configure.ac: Update libtool to latest CVS version.
2008-01-02 Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
* magick/command.c (DisplayImageCommand): No longer default to
reading standard input if stdin fails isatty() test. This
behavior was causing failure to launch from Gnome and it is
difficult to work around the issue from within a .desktop file.
(AnimateImageCommand): No longer default to
reading standard input if stdin fails isatty() test.
Generated by dwww version 1.15 on Fri May 24 05:47:36 CEST 2024.