SYSTEMD.NSPAWN(5) systemd.nspawn SYSTEMD.NSPAWN(5)
NAME
systemd.nspawn - Container settings
SYNOPSIS
/etc/systemd/nspawn/machine.nspawn
/run/systemd/nspawn/machine.nspawn
/var/lib/machines/machine.nspawn
DESCRIPTION
An nspawn container settings file (suffix .nspawn) contains runtime
configuration for a local container, and is used by systemd-nspawn(1).
Files of this type are named after the containers they define settings
for. They are optional, and only required for containers whose
execution environment shall differ from the defaults. Files of this
type mostly contain settings that may also be set on the systemd-nspawn
command line, and make it easier to persistently attach specific
settings to specific containers. The syntax of these files is inspired
by .desktop files, similarly to other configuration files supported by
the systemd project. See systemd.syntax(7) for an overview.
.NSPAWN FILE DISCOVERY
Files are searched for by appending the .nspawn suffix to the machine
name of the container, as specified with the --machine= switch of
systemd-nspawn, or derived from the directory or image file name. This
file is first searched for in /etc/systemd/nspawn/ and
/run/systemd/nspawn/. If found there, the settings are read and all of
them take full effect (but may still be overridden by corresponding
command line arguments). Otherwise, the file will then be searched for
next to the image file or in the immediate parent of the root directory
of the container. If the file is found there, only a subset of the
settings will take effect however. All settings that possibly elevate
privileges or grant additional access to resources of the host (such as
files or directories) are ignored. To which options this applies is
documented below.
Persistent settings files created and maintained by the administrator
(and thus trusted) should be placed in /etc/systemd/nspawn/, while
automatically downloaded (and thus potentially untrusted) settings
files are placed in /var/lib/machines/ instead (next to the container
images), where their security impact is limited. In order to add
privileged settings to .nspawn files acquired from the image vendor, it
is recommended to copy the settings files into /etc/systemd/nspawn/ and
edit them there, so that the privileged options become available. The
precise algorithm for how the files are searched and interpreted may be
configured with systemd-nspawn's --settings= switch, see systemd-
nspawn(1) for details.
[EXEC] SECTION OPTIONS
Settings files may include an [Exec] section, which carries various
execution parameters:
Boot=
Takes a boolean argument, which defaults to off. If enabled,
systemd-nspawn will automatically search for an init executable and
invoke it. In this case, the specified parameters using Parameters=
are passed as additional arguments to the init process. This
setting corresponds to the --boot switch on the systemd-nspawn
command line. This option may not be combined with ProcessTwo=yes.
This option is specified by default in the systemd-nspawn@.service
template unit.
Ephemeral=
Takes a boolean argument, which defaults to off, If enabled, the
container is run with a temporary snapshot of its file system that
is removed immediately when the container terminates. This is
equivalent to the --ephemeral command line switch. See systemd-
nspawn(1) for details about the specific options supported.
ProcessTwo=
Takes a boolean argument, which defaults to off. If enabled, the
specified program is run as PID 2. A stub init process is run as
PID 1. This setting corresponds to the --as-pid2 switch on the
systemd-nspawn command line. This option may not be combined with
Boot=yes.
Parameters=
Takes a whitespace-separated list of arguments. Single ("'") and
double (""") quotes may be used around arguments with whitespace.
This is either a command line, beginning with the binary name to
execute, or – if Boot= is enabled – the list of arguments to pass
to the init process. This setting corresponds to the command line
parameters passed on the systemd-nspawn command line.
Note: Boot=no, Parameters=a b "c c" is the same as systemd-nspawn a
b "c c", and Boot=yes, Parameters=b 'c c' is the same as
systemd-nspawn --boot b 'c c'.
Environment=
Takes an environment variable assignment consisting of key and
value, separated by "=". Sets an environment variable for the main
process invoked in the container. This setting may be used multiple
times to set multiple environment variables. It corresponds to the
--setenv= command line switch.
User=
Takes a UNIX user name. Specifies the user name to invoke the main
process of the container as. This user must be known in the
container's user database. This corresponds to the --user= command
line switch.
WorkingDirectory=
Selects the working directory for the process invoked in the
container. Expects an absolute path in the container's file system
namespace. This corresponds to the --chdir= command line switch.
PivotRoot=
Selects a directory to pivot to / inside the container when
starting up. Takes a single path, or a pair of two paths separated
by a colon. Both paths must be absolute, and are resolved in the
container's file system namespace. This corresponds to the
--pivot-root= command line switch.
Capability=, DropCapability=
Takes a space-separated list of Linux process capabilities (see
capabilities(7) for details). The Capability= setting specifies
additional capabilities to pass on top of the default set of
capabilities. The DropCapability= setting specifies capabilities to
drop from the default set. These settings correspond to the
--capability= and --drop-capability= command line switches. Note
that Capability= is a privileged setting, and only takes effect in
.nspawn files in /etc/systemd/nspawn/ and /run/system/nspawn/ (see
above). On the other hand, DropCapability= takes effect in all
cases. If the special value "all" is passed, all capabilities are
retained (or dropped).
These settings change the bounding set of capabilities which also
limits the ambient capabilities as given with the
AmbientCapability=.
AmbientCapability=
Takes a space-separated list of Linux process capabilities (see
capabilities(7) for details). The AmbientCapability= setting
specifies capabilities which will be passed to the started program
in the inheritable and ambient capability sets. This will grant
these capabilities to this process. This setting correspond to the
--ambient-capability= command line switch.
The value "all" is not supported for this setting.
The setting of AmbientCapability= must be covered by the bounding
set settings which were established by Capability= and
DropCapability=.
Note that AmbientCapability= is a privileged setting (see above).
NoNewPrivileges=
Takes a boolean argument that controls the PR_SET_NO_NEW_PRIVS flag
for the container payload. This is equivalent to the
--no-new-privileges= command line switch. See systemd-nspawn(1) for
details.
KillSignal=
Specify the process signal to send to the container's PID 1 when
nspawn itself receives SIGTERM, in order to trigger an orderly
shutdown of the container. Defaults to SIGRTMIN+3 if Boot= is used
(on systemd-compatible init systems SIGRTMIN+3 triggers an orderly
shutdown). For a list of valid signals, see signal(7).
Personality=
Configures the kernel personality for the container. This is
equivalent to the --personality= switch.
MachineID=
Configures the 128-bit machine ID (UUID) to pass to the container.
This is equivalent to the --uuid= command line switch. This option
is privileged (see above).
PrivateUsers=
Configures support for usernamespacing. This is equivalent to the
--private-users= command line switch, and takes the same options.
This option is privileged (see above). This option is the default
if the systemd-nspawn@.service template unit file is used.
NotifyReady=
Configures support for notifications from the container's init
process. This is equivalent to the --notify-ready= command line
switch, and takes the same parameters. See systemd-nspawn(1) for
details about the specific options supported.
SystemCallFilter=
Configures the system call filter applied to containers. This is
equivalent to the --system-call-filter= command line switch, and
takes the same list parameter. See systemd-nspawn(1) for details.
LimitCPU=, LimitFSIZE=, LimitDATA=, LimitSTACK=, LimitCORE=, LimitRSS=,
LimitNOFILE=, LimitAS=, LimitNPROC=, LimitMEMLOCK=, LimitLOCKS=,
LimitSIGPENDING=, LimitMSGQUEUE=, LimitNICE=, LimitRTPRIO=,
LimitRTTIME=
Configures various types of resource limits applied to containers.
This is equivalent to the --rlimit= command line switch, and takes
the same arguments. See systemd-nspawn(1) for details.
OOMScoreAdjust=
Configures the OOM score adjustment value. This is equivalent to
the --oom-score-adjust= command line switch, and takes the same
argument. See systemd-nspawn(1) for details.
CPUAffinity=
Configures the CPU affinity. This is equivalent to the
--cpu-affinity= command line switch, and takes the same argument.
See systemd-nspawn(1) for details.
Hostname=
Configures the kernel hostname set for the container. This is
equivalent to the --hostname= command line switch, and takes the
same argument. See systemd-nspawn(1) for details.
ResolvConf=
Configures how /etc/resolv.conf in the container shall be handled.
This is equivalent to the --resolv-conf= command line switch, and
takes the same argument. See systemd-nspawn(1) for details.
Timezone=
Configures how /etc/localtime in the container shall be handled.
This is equivalent to the --timezone= command line switch, and
takes the same argument. See systemd-nspawn(1) for details.
LinkJournal=
Configures how to link host and container journal setups. This is
equivalent to the --link-journal= command line switch, and takes
the same parameter. See systemd-nspawn(1) for details.
SuppressSync=
Configures whether to suppress disk synchronization for the
container payload. This is equivalent to the --suppress-sync=
command line switch, and takes the same parameter. See systemd-
nspawn(1) for details.
[FILES] SECTION OPTIONS
Settings files may include a [Files] section, which carries various
parameters configuring the file system of the container:
ReadOnly=
Takes a boolean argument, which defaults to off. If specified, the
container will be run with a read-only file system. This setting
corresponds to the --read-only command line switch.
Volatile=
Takes a boolean argument, or the special value "state". This
configures whether to run the container with volatile state and/or
configuration. This option is equivalent to --volatile=, see
systemd-nspawn(1) for details about the specific options supported.
Bind=, BindReadOnly=
Adds a bind mount from the host into the container. Takes a single
path, a pair of two paths separated by a colon, or a triplet of two
paths plus an option string separated by colons. This option may be
used multiple times to configure multiple bind mounts. This option
is equivalent to the command line switches --bind= and --bind-ro=,
see systemd-nspawn(1) for details about the specific options
supported. This setting is privileged (see above).
BindUser=
Binds a user from the host into the container. This option is
equivalent to the command line switch --bind-user=, see systemd-
nspawn(1) for details about the specific options supported. This
setting is privileged (see above).
TemporaryFileSystem=
Adds a "tmpfs" mount to the container. Takes a path or a pair of
path and option string, separated by a colon. This option may be
used multiple times to configure multiple "tmpfs" mounts. This
option is equivalent to the command line switch --tmpfs=, see
systemd-nspawn(1) for details about the specific options supported.
This setting is privileged (see above).
Inaccessible=
Masks the specified file or directory in the container, by
over-mounting it with an empty file node of the same type with the
most restrictive access mode. Takes a file system path as argument.
This option may be used multiple times to mask multiple files or
directories. This option is equivalent to the command line switch
--inaccessible=, see systemd-nspawn(1) for details about the
specific options supported. This setting is privileged (see above).
Overlay=, OverlayReadOnly=
Adds an overlay mount point. Takes a colon-separated list of paths.
This option may be used multiple times to configure multiple
overlay mounts. This option is equivalent to the command line
switches --overlay= and --overlay-ro=, see systemd-nspawn(1) for
details about the specific options supported. This setting is
privileged (see above).
PrivateUsersOwnership=
Configures whether the ownership of the files and directories in
the container tree shall be adjusted to the UID/GID range used, if
necessary and user namespacing is enabled. This is equivalent to
the --private-users-ownership= command line switch. This option is
privileged (see above).
[NETWORK] SECTION OPTIONS
Settings files may include a [Network] section, which carries various
parameters configuring the network connectivity of the container:
Private=
Takes a boolean argument, which defaults to off. If enabled, the
container will run in its own network namespace and not share
network interfaces and configuration with the host. This setting
corresponds to the --private-network command line switch.
VirtualEthernet=
Takes a boolean argument. Configures whether to create a virtual
Ethernet connection ("veth") between host and the container. This
setting implies Private=yes. This setting corresponds to the
--network-veth command line switch. This option is privileged (see
above). This option is the default if the systemd-nspawn@.service
template unit file is used.
VirtualEthernetExtra=
Takes a colon-separated pair of interface names. Configures an
additional virtual Ethernet connection ("veth") between host and
the container. The first specified name is the interface name on
the host, the second the interface name in the container. The
latter may be omitted in which case it is set to the same name as
the host side interface. This setting implies Private=yes. This
setting corresponds to the --network-veth-extra= command line
switch, and maybe be used multiple times. It is independent of
VirtualEthernet=. Note that this option is unrelated to the Bridge=
setting below, and thus any connections created this way are not
automatically added to any bridge device on the host side. This
option is privileged (see above).
Interface=
Takes a space-separated list of interfaces to add to the container.
This option corresponds to the --network-interface= command line
switch and implies Private=yes. This option is privileged (see
above).
MACVLAN=, IPVLAN=
Takes a space-separated list of interfaces to add MACLVAN or IPVLAN
interfaces to, which are then added to the container. These options
correspond to the --network-macvlan= and --network-ipvlan= command
line switches and imply Private=yes. These options are privileged
(see above).
Bridge=
Takes an interface name. This setting implies VirtualEthernet=yes
and Private=yes and has the effect that the host side of the
created virtual Ethernet link is connected to the specified bridge
interface. This option corresponds to the --network-bridge= command
line switch. This option is privileged (see above).
Zone=
Takes a network zone name. This setting implies VirtualEthernet=yes
and Private=yes and has the effect that the host side of the
created virtual Ethernet link is connected to an automatically
managed bridge interface named after the passed argument, prefixed
with "vz-". This option corresponds to the --network-zone= command
line switch. This option is privileged (see above).
Port=
Exposes a TCP or UDP port of the container on the host. This option
corresponds to the --port= command line switch, see systemd-
nspawn(1) for the precise syntax of the argument this option takes.
This option is privileged (see above).
SEE ALSO
systemd(1), systemd-nspawn(1), systemd.directives(7)
systemd 252 SYSTEMD.NSPAWN(5)
Generated by dwww version 1.15 on Fri Jun 28 21:00:36 CEST 2024.