SED(1) User Commands SED(1)
NAME
sed - stream editor for filtering and transforming text
SYNOPSIS
sed [-V] [--version] [--help] [-n] [--quiet] [--silent]
[-l N] [--line-length=N] [-u] [--unbuffered]
[-E] [-r] [--regexp-extended]
[-e script] [--expression=script]
[-f script-file] [--file=script-file]
[script-if-no-other-script]
[file...]
DESCRIPTION
Sed is a stream editor. A stream editor is used to perform basic text
transformations on an input stream (a file or input from a pipeline).
While in some ways similar to an editor which permits scripted edits
(such as ed), sed works by making only one pass over the input(s), and
is consequently more efficient. But it is sed's ability to filter text
in a pipeline which particularly distinguishes it from other types of
editors.
-n, --quiet, --silent
suppress automatic printing of pattern space
--debug
annotate program execution
-e script, --expression=script
add the script to the commands to be executed
-f script-file, --file=script-file
add the contents of script-file to the commands to be executed
--follow-symlinks
follow symlinks when processing in place
-i[SUFFIX], --in-place[=SUFFIX]
edit files in place (makes backup if SUFFIX supplied)
-l N, --line-length=N
specify the desired line-wrap length for the `l' command
--posix
disable all GNU extensions.
-E, -r, --regexp-extended
use extended regular expressions in the script (for portability
use POSIX -E).
-s, --separate
consider files as separate rather than as a single, continuous
long stream.
--sandbox
operate in sandbox mode (disable e/r/w commands).
-u, --unbuffered
load minimal amounts of data from the input files and flush the
output buffers more often
-z, --null-data
separate lines by NUL characters
--help
display this help and exit
--version
output version information and exit
If no -e, --expression, -f, or --file option is given, then the first
non-option argument is taken as the sed script to interpret. All re-
maining arguments are names of input files; if no input files are spec-
ified, then the standard input is read.
GNU sed home page: <https://www.gnu.org/software/sed/>. General help
using GNU software: <https://www.gnu.org/gethelp/>. E-mail bug reports
to: <bug-sed@gnu.org>.
Packaged by Debian Copyright © 2022 Free Software Foundation, Inc. Li-
cense GPLv3+: GNU GPL version 3 or later <https://gnu.org/li-
censes/gpl.html>. This is free software: you are free to change and
redistribute it. There is NO WARRANTY, to the extent permitted by law.
COMMAND SYNOPSIS
This is just a brief synopsis of sed commands to serve as a reminder to
those who already know sed; other documentation (such as the texinfo
document) must be consulted for fuller descriptions.
Zero-address ``commands''
: label
Label for b and t commands.
#comment
The comment extends until the next newline (or the end of a -e
script fragment).
} The closing bracket of a { } block.
Zero- or One- address commands
= Print the current line number.
a \
text Append text, which has each embedded newline preceded by a back-
slash.
i \
text Insert text, which has each embedded newline preceded by a back-
slash.
q [exit-code]
Immediately quit the sed script without processing any more in-
put, except that if auto-print is not disabled the current pat-
tern space will be printed. The exit code argument is a GNU ex-
tension.
Q [exit-code]
Immediately quit the sed script without processing any more in-
put. This is a GNU extension.
r filename
Append text read from filename.
R filename
Append a line read from filename. Each invocation of the com-
mand reads a line from the file. This is a GNU extension.
Commands which accept address ranges
{ Begin a block of commands (end with a }).
b label
Branch to label; if label is omitted, branch to end of script.
c \
text Replace the selected lines with text, which has each embedded
newline preceded by a backslash.
d Delete pattern space. Start next cycle.
D If pattern space contains no newline, start a normal new cycle
as if the d command was issued. Otherwise, delete text in the
pattern space up to the first newline, and restart cycle with
the resultant pattern space, without reading a new line of in-
put.
h H Copy/append pattern space to hold space.
g G Copy/append hold space to pattern space.
l List out the current line in a ``visually unambiguous'' form.
l width
List out the current line in a ``visually unambiguous'' form,
breaking it at width characters. This is a GNU extension.
n N Read/append the next line of input into the pattern space.
p Print the current pattern space.
P Print up to the first embedded newline of the current pattern
space.
s/regexp/replacement/
Attempt to match regexp against the pattern space. If success-
ful, replace that portion matched with replacement. The re-
placement may contain the special character & to refer to that
portion of the pattern space which matched, and the special es-
capes \1 through \9 to refer to the corresponding matching sub-
expressions in the regexp.
t label
If a s/// has done a successful substitution since the last in-
put line was read and since the last t or T command, then branch
to label; if label is omitted, branch to end of script.
T label
If no s/// has done a successful substitution since the last in-
put line was read and since the last t or T command, then branch
to label; if label is omitted, branch to end of script. This is
a GNU extension.
w filename
Write the current pattern space to filename.
W filename
Write the first line of the current pattern space to filename.
This is a GNU extension.
x Exchange the contents of the hold and pattern spaces.
y/source/dest/
Transliterate the characters in the pattern space which appear
in source to the corresponding character in dest.
Addresses
Sed commands can be given with no addresses, in which case the command
will be executed for all input lines; with one address, in which case
the command will only be executed for input lines which match that ad-
dress; or with two addresses, in which case the command will be exe-
cuted for all input lines which match the inclusive range of lines
starting from the first address and continuing to the second address.
Three things to note about address ranges: the syntax is addr1,addr2
(i.e., the addresses are separated by a comma); the line which addr1
matched will always be accepted, even if addr2 selects an earlier line;
and if addr2 is a regexp, it will not be tested against the line that
addr1 matched.
After the address (or address-range), and before the command, a ! may
be inserted, which specifies that the command shall only be executed if
the address (or address-range) does not match.
The following address types are supported:
number Match only the specified line number (which increments cumula-
tively across files, unless the -s option is specified on the
command line).
first~step
Match every step'th line starting with line first. For example,
``sed -n 1~2p'' will print all the odd-numbered lines in the in-
put stream, and the address 2~5 will match every fifth line,
starting with the second. first can be zero; in this case, sed
operates as if it were equal to step. (This is an extension.)
$ Match the last line.
/regexp/
Match lines matching the regular expression regexp. Matching is
performed on the current pattern space, which can be modified
with commands such as ``s///''.
\cregexpc
Match lines matching the regular expression regexp. The c may
be any character.
GNU sed also supports some special 2-address forms:
0,addr2
Start out in "matched first address" state, until addr2 is
found. This is similar to 1,addr2, except that if addr2 matches
the very first line of input the 0,addr2 form will be at the end
of its range, whereas the 1,addr2 form will still be at the be-
ginning of its range. This works only when addr2 is a regular
expression.
addr1,+N
Will match addr1 and the N lines following addr1.
addr1,~N
Will match addr1 and the lines following addr1 until the next
line whose input line number is a multiple of N.
REGULAR EXPRESSIONS
POSIX.2 BREs should be supported, but they aren't completely because of
performance problems. The \n sequence in a regular expression matches
the newline character, and similarly for \a, \t, and other sequences.
The -E option switches to using extended regular expressions instead;
it has been supported for years by GNU sed, and is now included in
POSIX.
BUGS
E-mail bug reports to bug-sed@gnu.org. Also, please include the output
of ``sed --version'' in the body of your report if at all possible.
AUTHOR
Written by Jay Fenlason, Tom Lord, Ken Pizzini, Paolo Bonzini, Jim Mey-
ering, and Assaf Gordon.
This sed program was built with SELinux support. SELinux is disabled
on this system.
GNU sed home page: <https://www.gnu.org/software/sed/>. General help
using GNU software: <https://www.gnu.org/gethelp/>. E-mail bug reports
to: <bug-sed@gnu.org>.
SEE ALSO
awk(1), ed(1), grep(1), tr(1), perlre(1), sed.info, any of various
books on sed, the sed FAQ (http://sed.sf.net/grabbag/tutorials/sed-
faq.txt), http://sed.sf.net/grabbag/.
The full documentation for sed is maintained as a Texinfo manual. If
the info and sed programs are properly installed at your site, the com-
mand
info sed
should give you access to the complete manual.
GNU sed 4.9 January 2023 SED(1)
Generated by dwww version 1.15 on Thu Jun 20 14:25:08 CEST 2024.