pthreads(7) Miscellaneous Information Manual pthreads(7)
NAME
pthreads - POSIX threads
DESCRIPTION
POSIX.1 specifies a set of interfaces (functions, header files) for
threaded programming commonly known as POSIX threads, or Pthreads. A
single process can contain multiple threads, all of which are executing
the same program. These threads share the same global memory (data and
heap segments), but each thread has its own stack (automatic vari-
ables).
POSIX.1 also requires that threads share a range of other attributes
(i.e., these attributes are process-wide rather than per-thread):
• process ID
• parent process ID
• process group ID and session ID
• controlling terminal
• user and group IDs
• open file descriptors
• record locks (see fcntl(2))
• signal dispositions
• file mode creation mask (umask(2))
• current directory (chdir(2)) and root directory (chroot(2))
• interval timers (setitimer(2)) and POSIX timers (timer_create(2))
• nice value (setpriority(2))
• resource limits (setrlimit(2))
• measurements of the consumption of CPU time (times(2)) and resources
(getrusage(2))
As well as the stack, POSIX.1 specifies that various other attributes
are distinct for each thread, including:
• thread ID (the pthread_t data type)
• signal mask (pthread_sigmask(3))
• the errno variable
• alternate signal stack (sigaltstack(2))
• real-time scheduling policy and priority (sched(7))
The following Linux-specific features are also per-thread:
• capabilities (see capabilities(7))
• CPU affinity (sched_setaffinity(2))
Pthreads function return values
Most pthreads functions return 0 on success, and an error number on
failure. The error numbers that can be returned have the same meaning
as the error numbers returned in errno by conventional system calls and
C library functions. Note that the pthreads functions do not set er-
rno. For each of the pthreads functions that can return an error,
POSIX.1-2001 specifies that the function can never fail with the error
EINTR.
Thread IDs
Each of the threads in a process has a unique thread identifier (stored
in the type pthread_t). This identifier is returned to the caller of
pthread_create(3), and a thread can obtain its own thread identifier
using pthread_self(3).
Thread IDs are guaranteed to be unique only within a process. (In all
pthreads functions that accept a thread ID as an argument, that ID by
definition refers to a thread in the same process as the caller.)
The system may reuse a thread ID after a terminated thread has been
joined, or a detached thread has terminated. POSIX says: "If an appli-
cation attempts to use a thread ID whose lifetime has ended, the behav-
ior is undefined."
Thread-safe functions
A thread-safe function is one that can be safely (i.e., it will deliver
the same results regardless of whether it is) called from multiple
threads at the same time.
POSIX.1-2001 and POSIX.1-2008 require that all functions specified in
the standard shall be thread-safe, except for the following functions:
asctime()
basename()
catgets()
crypt()
ctermid() if passed a non-NULL argument
ctime()
dbm_clearerr()
dbm_close()
dbm_delete()
dbm_error()
dbm_fetch()
dbm_firstkey()
dbm_nextkey()
dbm_open()
dbm_store()
dirname()
dlerror()
drand48()
ecvt() [POSIX.1-2001 only (function removed in POSIX.1-2008)]
encrypt()
endgrent()
endpwent()
endutxent()
fcvt() [POSIX.1-2001 only (function removed in POSIX.1-2008)]
ftw()
gcvt() [POSIX.1-2001 only (function removed in POSIX.1-2008)]
getc_unlocked()
getchar_unlocked()
getdate()
getenv()
getgrent()
getgrgid()
getgrnam()
gethostbyaddr() [POSIX.1-2001 only (function removed in
POSIX.1-2008)]
gethostbyname() [POSIX.1-2001 only (function removed in
POSIX.1-2008)]
gethostent()
getlogin()
getnetbyaddr()
getnetbyname()
getnetent()
getopt()
getprotobyname()
getprotobynumber()
getprotoent()
getpwent()
getpwnam()
getpwuid()
getservbyname()
getservbyport()
getservent()
getutxent()
getutxid()
getutxline()
gmtime()
hcreate()
hdestroy()
hsearch()
inet_ntoa()
l64a()
lgamma()
lgammaf()
lgammal()
localeconv()
localtime()
lrand48()
mrand48()
nftw()
nl_langinfo()
ptsname()
putc_unlocked()
putchar_unlocked()
putenv()
pututxline()
rand()
readdir()
setenv()
setgrent()
setkey()
setpwent()
setutxent()
strerror()
strsignal() [Added in POSIX.1-2008]
strtok()
system() [Added in POSIX.1-2008]
tmpnam() if passed a non-NULL argument
ttyname()
unsetenv()
wcrtomb() if its final argument is NULL
wcsrtombs() if its final argument is NULL
wcstombs()
wctomb()
Async-cancel-safe functions
An async-cancel-safe function is one that can be safely called in an
application where asynchronous cancelability is enabled (see
pthread_setcancelstate(3)).
Only the following functions are required to be async-cancel-safe by
POSIX.1-2001 and POSIX.1-2008:
pthread_cancel()
pthread_setcancelstate()
pthread_setcanceltype()
Cancellation points
POSIX.1 specifies that certain functions must, and certain other func-
tions may, be cancelation points. If a thread is cancelable, its can-
celability type is deferred, and a cancelation request is pending for
the thread, then the thread is canceled when it calls a function that
is a cancelation point.
The following functions are required to be cancelation points by
POSIX.1-2001 and/or POSIX.1-2008:
accept()
aio_suspend()
clock_nanosleep()
close()
connect()
creat()
fcntl() F_SETLKW
fdatasync()
fsync()
getmsg()
getpmsg()
lockf() F_LOCK
mq_receive()
mq_send()
mq_timedreceive()
mq_timedsend()
msgrcv()
msgsnd()
msync()
nanosleep()
open()
openat() [Added in POSIX.1-2008]
pause()
poll()
pread()
pselect()
pthread_cond_timedwait()
pthread_cond_wait()
pthread_join()
pthread_testcancel()
putmsg()
putpmsg()
pwrite()
read()
readv()
recv()
recvfrom()
recvmsg()
select()
sem_timedwait()
sem_wait()
send()
sendmsg()
sendto()
sigpause() [POSIX.1-2001 only (moves to "may" list in POSIX.1-2008)]
sigsuspend()
sigtimedwait()
sigwait()
sigwaitinfo()
sleep()
system()
tcdrain()
usleep() [POSIX.1-2001 only (function removed in POSIX.1-2008)]
wait()
waitid()
waitpid()
write()
writev()
The following functions may be cancelation points according to
POSIX.1-2001 and/or POSIX.1-2008:
access()
asctime()
asctime_r()
catclose()
catgets()
catopen()
chmod() [Added in POSIX.1-2008]
chown() [Added in POSIX.1-2008]
closedir()
closelog()
ctermid()
ctime()
ctime_r()
dbm_close()
dbm_delete()
dbm_fetch()
dbm_nextkey()
dbm_open()
dbm_store()
dlclose()
dlopen()
dprintf() [Added in POSIX.1-2008]
endgrent()
endhostent()
endnetent()
endprotoent()
endpwent()
endservent()
endutxent()
faccessat() [Added in POSIX.1-2008]
fchmod() [Added in POSIX.1-2008]
fchmodat() [Added in POSIX.1-2008]
fchown() [Added in POSIX.1-2008]
fchownat() [Added in POSIX.1-2008]
fclose()
fcntl() (for any value of cmd argument)
fflush()
fgetc()
fgetpos()
fgets()
fgetwc()
fgetws()
fmtmsg()
fopen()
fpathconf()
fprintf()
fputc()
fputs()
fputwc()
fputws()
fread()
freopen()
fscanf()
fseek()
fseeko()
fsetpos()
fstat()
fstatat() [Added in POSIX.1-2008]
ftell()
ftello()
ftw()
futimens() [Added in POSIX.1-2008]
fwprintf()
fwrite()
fwscanf()
getaddrinfo()
getc()
getc_unlocked()
getchar()
getchar_unlocked()
getcwd()
getdate()
getdelim() [Added in POSIX.1-2008]
getgrent()
getgrgid()
getgrgid_r()
getgrnam()
getgrnam_r()
gethostbyaddr() [POSIX.1-2001 only (function removed in
POSIX.1-2008)]
gethostbyname() [POSIX.1-2001 only (function removed in
POSIX.1-2008)]
gethostent()
gethostid()
gethostname()
getline() [Added in POSIX.1-2008]
getlogin()
getlogin_r()
getnameinfo()
getnetbyaddr()
getnetbyname()
getnetent()
getopt() (if opterr is nonzero)
getprotobyname()
getprotobynumber()
getprotoent()
getpwent()
getpwnam()
getpwnam_r()
getpwuid()
getpwuid_r()
gets()
getservbyname()
getservbyport()
getservent()
getutxent()
getutxid()
getutxline()
getwc()
getwchar()
getwd() [POSIX.1-2001 only (function removed in POSIX.1-2008)]
glob()
iconv_close()
iconv_open()
ioctl()
link()
linkat() [Added in POSIX.1-2008]
lio_listio() [Added in POSIX.1-2008]
localtime()
localtime_r()
lockf() [Added in POSIX.1-2008]
lseek()
lstat()
mkdir() [Added in POSIX.1-2008]
mkdirat() [Added in POSIX.1-2008]
mkdtemp() [Added in POSIX.1-2008]
mkfifo() [Added in POSIX.1-2008]
mkfifoat() [Added in POSIX.1-2008]
mknod() [Added in POSIX.1-2008]
mknodat() [Added in POSIX.1-2008]
mkstemp()
mktime()
nftw()
opendir()
openlog()
pathconf()
pclose()
perror()
popen()
posix_fadvise()
posix_fallocate()
posix_madvise()
posix_openpt()
posix_spawn()
posix_spawnp()
posix_trace_clear()
posix_trace_close()
posix_trace_create()
posix_trace_create_withlog()
posix_trace_eventtypelist_getnext_id()
posix_trace_eventtypelist_rewind()
posix_trace_flush()
posix_trace_get_attr()
posix_trace_get_filter()
posix_trace_get_status()
posix_trace_getnext_event()
posix_trace_open()
posix_trace_rewind()
posix_trace_set_filter()
posix_trace_shutdown()
posix_trace_timedgetnext_event()
posix_typed_mem_open()
printf()
psiginfo() [Added in POSIX.1-2008]
psignal() [Added in POSIX.1-2008]
pthread_rwlock_rdlock()
pthread_rwlock_timedrdlock()
pthread_rwlock_timedwrlock()
pthread_rwlock_wrlock()
putc()
putc_unlocked()
putchar()
putchar_unlocked()
puts()
pututxline()
putwc()
putwchar()
readdir()
readdir_r()
readlink() [Added in POSIX.1-2008]
readlinkat() [Added in POSIX.1-2008]
remove()
rename()
renameat() [Added in POSIX.1-2008]
rewind()
rewinddir()
scandir() [Added in POSIX.1-2008]
scanf()
seekdir()
semop()
setgrent()
sethostent()
setnetent()
setprotoent()
setpwent()
setservent()
setutxent()
sigpause() [Added in POSIX.1-2008]
stat()
strerror()
strerror_r()
strftime()
symlink()
symlinkat() [Added in POSIX.1-2008]
sync()
syslog()
tmpfile()
tmpnam()
ttyname()
ttyname_r()
tzset()
ungetc()
ungetwc()
unlink()
unlinkat() [Added in POSIX.1-2008]
utime() [Added in POSIX.1-2008]
utimensat() [Added in POSIX.1-2008]
utimes() [Added in POSIX.1-2008]
vdprintf() [Added in POSIX.1-2008]
vfprintf()
vfwprintf()
vprintf()
vwprintf()
wcsftime()
wordexp()
wprintf()
wscanf()
An implementation may also mark other functions not specified in the
standard as cancelation points. In particular, an implementation is
likely to mark any nonstandard function that may block as a cancelation
point. (This includes most functions that can touch files.)
It should be noted that even if an application is not using asynchro-
nous cancelation, that calling a function from the above list from an
asynchronous signal handler may cause the equivalent of asynchronous
cancelation. The underlying user code may not expect asynchronous can-
celation and the state of the user data may become inconsistent.
Therefore signals should be used with caution when entering a region of
deferred cancelation.
Compiling on Linux
On Linux, programs that use the Pthreads API should be compiled using
cc -pthread.
Linux implementations of POSIX threads
Over time, two threading implementations have been provided by the GNU
C library on Linux:
LinuxThreads
This is the original Pthreads implementation. Since glibc 2.4,
this implementation is no longer supported.
NPTL (Native POSIX Threads Library)
This is the modern Pthreads implementation. By comparison with
LinuxThreads, NPTL provides closer conformance to the require-
ments of the POSIX.1 specification and better performance when
creating large numbers of threads. NPTL is available since
glibc 2.3.2, and requires features that are present in the Linux
2.6 kernel.
Both of these are so-called 1:1 implementations, meaning that each
thread maps to a kernel scheduling entity. Both threading implementa-
tions employ the Linux clone(2) system call. In NPTL, thread synchro-
nization primitives (mutexes, thread joining, and so on) are imple-
mented using the Linux futex(2) system call.
LinuxThreads
The notable features of this implementation are the following:
• In addition to the main (initial) thread, and the threads that the
program creates using pthread_create(3), the implementation creates
a "manager" thread. This thread handles thread creation and termi-
nation. (Problems can result if this thread is inadvertently
killed.)
• Signals are used internally by the implementation. On Linux 2.2 and
later, the first three real-time signals are used (see also sig-
nal(7)). On older Linux kernels, SIGUSR1 and SIGUSR2 are used. Ap-
plications must avoid the use of whichever set of signals is em-
ployed by the implementation.
• Threads do not share process IDs. (In effect, LinuxThreads threads
are implemented as processes which share more information than
usual, but which do not share a common process ID.) LinuxThreads
threads (including the manager thread) are visible as separate pro-
cesses using ps(1).
The LinuxThreads implementation deviates from the POSIX.1 specification
in a number of ways, including the following:
• Calls to getpid(2) return a different value in each thread.
• Calls to getppid(2) in threads other than the main thread return the
process ID of the manager thread; instead getppid(2) in these
threads should return the same value as getppid(2) in the main
thread.
• When one thread creates a new child process using fork(2), any
thread should be able to wait(2) on the child. However, the imple-
mentation allows only the thread that created the child to wait(2)
on it.
• When a thread calls execve(2), all other threads are terminated (as
required by POSIX.1). However, the resulting process has the same
PID as the thread that called execve(2): it should have the same PID
as the main thread.
• Threads do not share user and group IDs. This can cause complica-
tions with set-user-ID programs and can cause failures in Pthreads
functions if an application changes its credentials using seteuid(2)
or similar.
• Threads do not share a common session ID and process group ID.
• Threads do not share record locks created using fcntl(2).
• The information returned by times(2) and getrusage(2) is per-thread
rather than process-wide.
• Threads do not share semaphore undo values (see semop(2)).
• Threads do not share interval timers.
• Threads do not share a common nice value.
• POSIX.1 distinguishes the notions of signals that are directed to
the process as a whole and signals that are directed to individual
threads. According to POSIX.1, a process-directed signal (sent us-
ing kill(2), for example) should be handled by a single, arbitrarily
selected thread within the process. LinuxThreads does not support
the notion of process-directed signals: signals may be sent only to
specific threads.
• Threads have distinct alternate signal stack settings. However, a
new thread's alternate signal stack settings are copied from the
thread that created it, so that the threads initially share an al-
ternate signal stack. (A new thread should start with no alternate
signal stack defined. If two threads handle signals on their shared
alternate signal stack at the same time, unpredictable program fail-
ures are likely to occur.)
NPTL
With NPTL, all of the threads in a process are placed in the same
thread group; all members of a thread group share the same PID. NPTL
does not employ a manager thread.
NPTL makes internal use of the first two real-time signals; these sig-
nals cannot be used in applications. See nptl(7) for further details.
NPTL still has at least one nonconformance with POSIX.1:
• Threads do not share a common nice value.
Some NPTL nonconformances occur only with older kernels:
• The information returned by times(2) and getrusage(2) is per-thread
rather than process-wide (fixed in Linux 2.6.9).
• Threads do not share resource limits (fixed in Linux 2.6.10).
• Threads do not share interval timers (fixed in Linux 2.6.12).
• Only the main thread is permitted to start a new session using set-
sid(2) (fixed in Linux 2.6.16).
• Only the main thread is permitted to make the process into a process
group leader using setpgid(2) (fixed in Linux 2.6.16).
• Threads have distinct alternate signal stack settings. However, a
new thread's alternate signal stack settings are copied from the
thread that created it, so that the threads initially share an al-
ternate signal stack (fixed in Linux 2.6.16).
Note the following further points about the NPTL implementation:
• If the stack size soft resource limit (see the description of
RLIMIT_STACK in setrlimit(2)) is set to a value other than unlim-
ited, then this value defines the default stack size for new
threads. To be effective, this limit must be set before the program
is executed, perhaps using the ulimit -s shell built-in command
(limit stacksize in the C shell).
Determining the threading implementation
Since glibc 2.3.2, the getconf(1) command can be used to determine the
system's threading implementation, for example:
bash$ getconf GNU_LIBPTHREAD_VERSION
NPTL 2.3.4
With older glibc versions, a command such as the following should be
sufficient to determine the default threading implementation:
bash$ $( ldd /bin/ls | grep libc.so | awk '{print $3}' ) | \
egrep -i 'threads|nptl'
Native POSIX Threads Library by Ulrich Drepper et al
Selecting the threading implementation: LD_ASSUME_KERNEL
On systems with a glibc that supports both LinuxThreads and NPTL (i.e.,
glibc 2.3.x), the LD_ASSUME_KERNEL environment variable can be used to
override the dynamic linker's default choice of threading implementa-
tion. This variable tells the dynamic linker to assume that it is run-
ning on top of a particular kernel version. By specifying a kernel
version that does not provide the support required by NPTL, we can
force the use of LinuxThreads. (The most likely reason for doing this
is to run a (broken) application that depends on some nonconformant be-
havior in LinuxThreads.) For example:
bash$ $( LD_ASSUME_KERNEL=2.2.5 ldd /bin/ls | grep libc.so | \
awk '{print $3}' ) | egrep -i 'threads|nptl'
linuxthreads-0.10 by Xavier Leroy
SEE ALSO
clone(2), fork(2), futex(2), gettid(2), proc(5), attributes(7),
futex(7), nptl(7), sigevent(7), signal(7)
Various Pthreads manual pages, for example: pthread_atfork(3),
pthread_attr_init(3), pthread_cancel(3), pthread_cleanup_push(3),
pthread_cond_signal(3), pthread_cond_wait(3), pthread_create(3),
pthread_detach(3), pthread_equal(3), pthread_exit(3),
pthread_key_create(3), pthread_kill(3), pthread_mutex_lock(3),
pthread_mutex_unlock(3), pthread_mutexattr_destroy(3),
pthread_mutexattr_init(3), pthread_once(3), pthread_spin_init(3),
pthread_spin_lock(3), pthread_rwlockattr_setkind_np(3),
pthread_setcancelstate(3), pthread_setcanceltype(3),
pthread_setspecific(3), pthread_sigmask(3), pthread_sigqueue(3), and
pthread_testcancel(3)
Linux man-pages 6.03 2023-02-05 pthreads(7)
Generated by dwww version 1.15 on Fri Jun 21 07:26:14 CEST 2024.