FINDMNT(8) System Administration FINDMNT(8)
NAME
findmnt - find a filesystem
SYNOPSIS
findmnt [options]
findmnt [options] device|mountpoint
findmnt [options] [--source] device [--target path|--mountpoint
mountpoint]
DESCRIPTION
findmnt will list all mounted filesystems or search for a filesystem.
The findmnt command is able to search in /etc/fstab, /etc/mtab or
/proc/self/mountinfo. If device or mountpoint is not given, all
filesystems are shown.
The device may be specified by device name, major:minor numbers,
filesystem label or UUID, or partition label or UUID. Note that findmnt
follows mount(8) behavior where a device name may be interpreted as a
mountpoint (and vice versa) if the --target, --mountpoint or --source
options are not specified.
The command-line option --target accepts any file or directory and then
findmnt displays the filesystem for the given path.
The command prints all mounted filesystems in the tree-like format by
default.
The relationship between block devices and filesystems is not always
one-to-one. The filesystem may use more block devices. This is why
findmnt provides SOURCE and SOURCES (pl.) columns. The column SOURCES
displays all devices where it is possible to find the same filesystem
UUID (or another tag specified in fstab when executed with --fstab and
--evaluate).
OPTIONS
-A, --all
Disable all built-in filters and print all filesystems.
-a, --ascii
Use ascii characters for tree formatting.
-b, --bytes
Print the sizes in bytes rather than in a human-readable format.
By default, the unit, sizes are expressed in, is byte, and unit
prefixes are in power of 2^10 (1024). Abbreviations of symbols are
exhibited truncated in order to reach a better readability, by
exhibiting alone the first letter of them; examples: "1 KiB" and "1
MiB" are respectively exhibited as "1 K" and "1 M", then omitting
on purpose the mention "iB", which is part of these abbreviations.
-C, --nocanonicalize
Do not canonicalize paths at all. This option affects the comparing
of paths and the evaluation of tags (LABEL, UUID, etc.).
-c, --canonicalize
Canonicalize all printed paths.
--deleted
Print filesystems where target (mountpoint) is marked as deleted by
kernel.
-D, --df
Imitate the output of df(1). This option is equivalent to -o
SOURCE,FSTYPE,SIZE,USED,AVAIL,USE%,TARGET but excludes all pseudo
filesystems. Use --all to print all filesystems.
-d, --direction word
The search direction, either forward or backward.
-e, --evaluate
Convert all tags (LABEL, UUID, PARTUUID, or PARTLABEL) to the
corresponding device names for the SOURCE column. It’s an unusual
situation, but the same tag may be duplicated (used for more
devices). For this purpose, there is SOURCES (pl.) column. This
column displays by multi-line cell all devices where the tag is
detected by libblkid. This option makes sense for fstab only.
-F, --tab-file path
Search in an alternative file. If used with --fstab, --mtab or
--kernel, then it overrides the default paths. If specified more
than once, then tree-like output is disabled (see the --list
option).
-f, --first-only
Print the first matching filesystem only.
-i, --invert
Invert the sense of matching.
-J, --json
Use JSON output format.
-k, --kernel
Search in /proc/self/mountinfo. The output is in the tree-like
format. This is the default. The output contains only mount options
maintained by kernel (see also --mtab).
-l, --list
Use the list output format. This output format is automatically
enabled if the output is restricted by the -t, -O, -S or -T option
and the option --submounts is not used or if more that one source
file (the option -F) is specified.
-M, --mountpoint path
Explicitly define the mountpoint file or directory. See also
--target.
-m, --mtab
Search in /etc/mtab. The output is in the list format by default
(see --tree). The output may include user space mount options.
-N, --task tid
Use alternative namespace /proc/<tid>/mountinfo rather than the
default /proc/self/mountinfo. If the option is specified more than
once, then tree-like output is disabled (see the --list option).
See also the unshare(1) command.
-n, --noheadings
Do not print a header line.
-O, --options list
Limit the set of printed filesystems. More than one option may be
specified in a comma-separated list. The -t and -O options are
cumulative in effect. It is different from -t in that each option
is matched exactly; a leading no at the beginning does not have
global meaning. The "no" can used for individual items in the list.
The "no" prefix interpretation can be disabled by "+" prefix.
-o, --output list
Define output columns. See the --help output to get a list of the
currently supported columns. The TARGET column contains tree
formatting if the --list or --raw options are not specified.
The default list of columns may be extended if list is specified in
the format +list (e.g., findmnt -o +PROPAGATION).
--output-all
Output almost all available columns. The columns that require
--poll are not included.
-P, --pairs
Produce output in the form of key="value" pairs. All potentially
unsafe value characters are hex-escaped (\x<code>). See also option
--shell.
-p, --poll[=list]
Monitor changes in the /proc/self/mountinfo file. Supported actions
are: mount, umount, remount and move. More than one action may be
specified in a comma-separated list. All actions are monitored by
default.
The time for which --poll will block can be restricted with the
--timeout or --first-only options.
The standard columns always use the new version of the information
from the mountinfo file, except the umount action which is based on
the original information cached by findmnt. The poll mode allows
using extra columns:
ACTION
mount, umount, move or remount action name; this column is
enabled by default
OLD-TARGET
available for umount and move actions
OLD-OPTIONS
available for umount and remount actions
--pseudo
Print only pseudo filesystems.
--shadow
Print only filesystems over-mounted by another filesystem.
-R, --submounts
Print recursively all submounts for the selected filesystems. The
restrictions defined by options -t, -O, -S, -T and --direction are
not applied to submounts. All submounts are always printed in
tree-like order. The option enables the tree-like output format by
default. This option has no effect for --mtab or --fstab.
-r, --raw
Use raw output format. All potentially unsafe characters are
hex-escaped (\x<code>).
--real
Print only real filesystems.
-S, --source spec
Explicitly define the mount source. Supported specifications are
device, maj:min, LABEL=label, UUID=uuid, PARTLABEL=label and
PARTUUID=uuid.
-s, --fstab
Search in /etc/fstab. The output is in the list format (see
--list).
-T, --target path
Define the mount target. If path is not a mountpoint file or
directory, then findmnt checks the path elements in reverse order
to get the mountpoint (this feature is supported only when
searching in kernel files and unsupported for --fstab). It’s
recommended to use the option --mountpoint when checks of path
elements are unwanted and path is a strictly specified mountpoint.
-t, --types list
Limit the set of printed filesystems. More than one type may be
specified in a comma-separated list. The list of filesystem types
can be prefixed with no to specify the filesystem types on which no
action should be taken. For more details see mount(8).
--tree
Enable tree-like output if possible. The options is silently
ignored for tables where is missing child-parent relation (e.g.,
fstab).
--shadowed
Print only filesystems over-mounted by another filesystem.
-U, --uniq
Ignore filesystems with duplicate mount targets, thus effectively
skipping over-mounted mount points.
-u, --notruncate
Do not truncate text in columns. The default is to not truncate the
TARGET, SOURCE, UUID, LABEL, PARTUUID, PARTLABEL columns. This
option disables text truncation also in all other columns.
-v, --nofsroot
Do not print a [/dir] in the SOURCE column for bind mounts or btrfs
subvolumes.
-w, --timeout milliseconds
Specify an upper limit on the time for which --poll will block, in
milliseconds.
-x, --verify
Check mount table content. The default is to verify /etc/fstab
parsability and usability. It’s possible to use this option also
with --tab-file. It’s possible to specify source (device) or target
(mountpoint) to filter mount table. The option --verbose forces
findmnt to print more details.
--verbose
Force findmnt to print more information (--verify only for now).
--vfs-all
When used with VFS-OPTIONS column, print all VFS (fs-independent)
flags. This option is designed for auditing purposes to list also
default VFS kernel mount options which are normally not listed.
-y, --shell
The column name will be modified to contain only characters allowed
for shell variable identifiers. This is usable, for example, with
--pairs. Note that this feature has been automatically enabled for
--pairs in version 2.37, but due to compatibility issues, now it’s
necessary to request this behavior by --shell.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
EXIT STATUS
The exit value is 0 if there is something to display, or 1 on any error
(for example if no filesystem is found based on the user’s filter
specification, or the device path or mountpoint does not exist).
ENVIRONMENT
LIBMOUNT_FSTAB=<path>
overrides the default location of the fstab file
LIBMOUNT_MTAB=<path>
overrides the default location of the mtab file
LIBMOUNT_DEBUG=all
enables libmount debug output
LIBSMARTCOLS_DEBUG=all
enables libsmartcols debug output
LIBSMARTCOLS_DEBUG_PADDING=on
use visible padding characters.
EXAMPLES
findmnt --fstab -t nfs
Prints all NFS filesystems defined in /etc/fstab.
findmnt --fstab /mnt/foo
Prints all /etc/fstab filesystems where the mountpoint directory is
/mnt/foo. It also prints bind mounts where /mnt/foo is a source.
findmnt --fstab --target /mnt/foo
Prints all /etc/fstab filesystems where the mountpoint directory is
/mnt/foo.
findmnt --fstab --evaluate
Prints all /etc/fstab filesystems and converts LABEL= and UUID=
tags to the real device names.
findmnt -n --raw --evaluate --output=target LABEL=/boot
Prints only the mountpoint where the filesystem with label "/boot"
is mounted.
findmnt --poll --mountpoint /mnt/foo
Monitors mount, unmount, remount and move on /mnt/foo.
findmnt --poll=umount --first-only --mountpoint /mnt/foo
Waits for /mnt/foo unmount.
findmnt --poll=remount -t ext3 -O ro
Monitors remounts to read-only mode on all ext3 filesystems.
AUTHORS
Karel Zak <kzak@redhat.com>
SEE ALSO
fstab(5), mount(8)
REPORTING BUGS
For bug reports, use the issue tracker at
https://github.com/util-linux/util-linux/issues.
AVAILABILITY
The findmnt command is part of the util-linux package which can be
downloaded from Linux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
util-linux 2.38.1 2022-05-11 FINDMNT(8)
Generated by dwww version 1.15 on Mon Jun 17 11:01:19 CEST 2024.