DMESG(1) User Commands DMESG(1)
NAME
dmesg - print or control the kernel ring buffer
SYNOPSIS
dmesg [options]
dmesg --clear
dmesg --read-clear [options]
dmesg --console-level level
dmesg --console-on
dmesg --console-off
DESCRIPTION
dmesg is used to examine or control the kernel ring buffer.
The default action is to display all messages from the kernel ring
buffer.
OPTIONS
The --clear, --read-clear, --console-on, --console-off, and
--console-level options are mutually exclusive.
-C, --clear
Clear the ring buffer.
-c, --read-clear
Clear the ring buffer after first printing its contents.
-D, --console-off
Disable the printing of messages to the console.
-d, --show-delta
Display the timestamp and the time delta spent between messages. If
used together with --notime then only the time delta without the
timestamp is printed.
-E, --console-on
Enable printing messages to the console.
-e, --reltime
Display the local time and the delta in human-readable format. Be
aware that conversion to the local time could be inaccurate (see -T
for more details).
-F, --file file
Read the syslog messages from the given file. Note that -F does not
support messages in kmsg format. The old syslog format is supported
only.
-f, --facility list
Restrict output to the given (comma-separated) list of facilities.
For example:
dmesg --facility=daemon
will print messages from system daemons only. For all supported
facilities see the --help output.
-H, --human
Enable human-readable output. See also --color, --reltime and
--nopager.
-J, --json
Use JSON output format. The time output format is in "sec.usec"
format only, log priority level is not decoded by default (use
--decode to split into facility and priority), the other options to
control the output format or time format are silently ignored.
-k, --kernel
Print kernel messages.
-L, --color[=when]
Colorize the output. The optional argument when can be auto, never
or always. If the when argument is omitted, it defaults to auto.
The colors can be disabled; for the current built-in default see
the --help output. See also the COLORS section below.
-l, --level list
Restrict output to the given (comma-separated) list of levels. For
example:
dmesg --level=err,warn
will print error and warning messages only. For all supported
levels see the --help output.
-n, --console-level level
Set the level at which printing of messages is done to the console.
The level is a level number or abbreviation of the level name. For
all supported levels see the --help output.
For example, -n 1 or -n emerg prevents all messages, except
emergency (panic) messages, from appearing on the console. All
levels of messages are still written to /proc/kmsg, so syslogd(8)
can still be used to control exactly where kernel messages appear.
When the -n option is used, dmesg will not print or clear the
kernel ring buffer.
--noescape
The unprintable and potentially unsafe characters (e.g., broken
multi-byte sequences, terminal controlling chars, etc.) are escaped
in format \x<hex> for security reason by default. This option
disables this feature at all. It’s usable for example for debugging
purpose together with --raw. Be careful and don’t use it by
default.
-P, --nopager
Do not pipe output into a pager. A pager is enabled by default for
--human output.
-p, --force-prefix
Add facility, level or timestamp information to each line of a
multi-line message.
-r, --raw
Print the raw message buffer, i.e., do not strip the log-level
prefixes, but all unprintable characters are still escaped (see
also --noescape).
Note that the real raw format depends on the method how dmesg reads
kernel messages. The /dev/kmsg device uses a different format than
syslog(2). For backward compatibility, dmesg returns data always in
the syslog(2) format. It is possible to read the real raw data from
/dev/kmsg by, for example, the command 'dd if=/dev/kmsg
iflag=nonblock'.
-S, --syslog
Force dmesg to use the syslog(2) kernel interface to read kernel
messages. The default is to use /dev/kmsg rather than syslog(2)
since kernel 3.5.0.
-s, --buffer-size size
Use a buffer of size to query the kernel ring buffer. This is 16392
by default. (The default kernel syslog buffer size was 4096 at
first, 8192 since 1.3.54, 16384 since 2.1.113.) If you have set the
kernel buffer to be larger than the default, then this option can
be used to view the entire buffer.
-T, --ctime
Print human-readable timestamps.
Be aware that the timestamp could be inaccurate! The time source
used for the logs is not updated after system SUSPEND/RESUME.
Timestamps are adjusted according to current delta between boottime
and monotonic clocks, this works only for messages printed after
last resume.
--since time
Display record since the specified time. The time is possible to
specify in absolute way as well as by relative notation (e.g. '1
hour ago'). Be aware that the timestamp could be inaccurate and see
--ctime for more details.
--until time
Display record until the specified time. The time is possible to
specify in absolute way as well as by relative notation (e.g. '1
hour ago'). Be aware that the timestamp could be inaccurate and see
--ctime for more details.
-t, --notime
Do not print kernel’s timestamps.
--time-format format
Print timestamps using the given format, which can be ctime,
reltime, delta or iso. The first three formats are aliases of the
time-format-specific options. The iso format is a dmesg
implementation of the ISO-8601 timestamp format. The purpose of
this format is to make the comparing of timestamps between two
systems, and any other parsing, easy. The definition of the iso
timestamp is: YYYY-MM-DD<T>HH:MM:SS,<microseconds>←+><timezone
offset from UTC>.
The iso format has the same issue as ctime: the time may be
inaccurate when a system is suspended and resumed.
-u, --userspace
Print userspace messages.
-w, --follow
Wait for new messages. This feature is supported only on systems
with a readable /dev/kmsg (since kernel 3.5.0).
-W, --follow-new
Wait and print only new messages.
-x, --decode
Decode facility and level (priority) numbers to human-readable
prefixes.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
COLORS
The output colorization is implemented by terminal-colors.d(5)
functionality. Implicit coloring can be disabled by an empty file
/etc/terminal-colors.d/dmesg.disable
for the dmesg command or for all tools by
/etc/terminal-colors.d/disable
The user-specific $XDG_CONFIG_HOME/terminal-colors.d or
$HOME/.config/terminal-colors.d overrides the global setting.
Note that the output colorization may be enabled by default, and in
this case terminal-colors.d directories do not have to exist yet.
The logical color names supported by dmesg are:
subsys
The message sub-system prefix (e.g., "ACPI:").
time
The message timestamp.
timebreak
The message timestamp in short ctime format in --reltime or --human
output.
alert
The text of the message with the alert log priority.
crit
The text of the message with the critical log priority.
err
The text of the message with the error log priority.
warn
The text of the message with the warning log priority.
segfault
The text of the message that inform about segmentation fault.
EXIT STATUS
dmesg can fail reporting permission denied error. This is usually
caused by dmesg_restrict kernel setting, please see syslog(2) for more
details.
AUTHORS
Karel Zak <kzak@redhat.com>
dmesg was originally written by Theodore Ts’o <tytso@athena.mit.edu>.
SEE ALSO
terminal-colors.d(5), syslogd(8)
REPORTING BUGS
For bug reports, use the issue tracker at
https://github.com/util-linux/util-linux/issues.
AVAILABILITY
The dmesg command is part of the util-linux package which can be
downloaded from Linux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
util-linux 2.38.1 2022-05-11 DMESG(1)
Generated by dwww version 1.15 on Sun Jun 2 00:03:52 CEST 2024.