OCAMLOPT(1) General Commands Manual OCAMLOPT(1) NAME ocamlopt - The OCaml native-code compiler SYNOPSIS ocamlopt [ options ] filename ... ocamlopt.opt (same options) DESCRIPTION The OCaml high-performance native-code compiler ocamlopt(1) compiles OCaml source files to native code object files and link these object files to produce standalone executables. The ocamlopt(1) command has a command-line interface very close to that of ocamlc(1). It accepts the same types of arguments and processes them sequentially, after all options have been processed: Arguments ending in .mli are taken to be source files for compilation unit interfaces. Interfaces specify the names exported by compilation units: they declare value names with their types, define public data types, declare abstract data types, and so on. From the file x.mli, the ocamlopt(1) compiler produces a compiled interface in the file x.cmi. The interface produced is identical to that produced by the bytecode compiler ocamlc(1). Arguments ending in .ml are taken to be source files for compilation unit implementations. Implementations provide definitions for the names exported by the unit, and also contain expressions to be evaluated for their side-effects. From the file x.ml, the ocamlopt(1) compiler pro- duces two files: x.o, containing native object code, and x.cmx, con- taining extra information for linking and optimization of the clients of the unit. The compiled implementation should always be referred to under the name x.cmx (when given a .o file, ocamlopt(1) assumes that it contains code compiled from C, not from OCaml). The implementation is checked against the interface file x.mli (if it exists) as described in the manual for ocamlc(1). Arguments ending in .cmx are taken to be compiled object code. These files are linked together, along with the object files obtained by com- piling .ml arguments (if any), and the OCaml standard library, to pro- duce a native-code executable program. The order in which .cmx and .ml arguments are presented on the command line is relevant: compilation units are initialized in that order at run-time, and it is a link-time error to use a component of a unit before having initialized it. Hence, a given x.cmx file must come before all .cmx files that refer to the unit x. Arguments ending in .cmxa are taken to be libraries of object code. Such a library packs in two files lib.cmxa and lib.a a set of object files (.cmx/.o files). Libraries are build with ocamlopt -a (see the description of the -a option below). The object files contained in the library are linked as regular .cmx files (see above), in the order specified when the library was built. The only difference is that if an object file contained in a library is not referenced anywhere in the program, then it is not linked in. Arguments ending in .c are passed to the C compiler, which generates a .o object file. This object file is linked with the program. Arguments ending in .o or .a are assumed to be C object files and li- braries. They are linked with the program. The output of the linking phase is a regular Unix executable file. It does not need ocamlrun(1) to run. ocamlopt.opt is the same compiler as ocamlopt, but compiled with itself instead of with the bytecode compiler ocamlc(1). Thus, it behaves ex- actly like ocamlopt, but compiles faster. ocamlopt.opt is not avail- able in all installations of OCaml. OPTIONS The following command-line options are recognized by ocamlopt(1). -a Build a library (.cmxa/.a file) with the object files (.cmx/.o files) given on the command line, instead of linking them into an executable file. The name of the library must be set with the -o option. If -cclib or -ccopt options are passed on the command line, these options are stored in the resulting .cmxa library. Then, linking with this library automatically adds back the -cclib and -ccopt options as if they had been provided on the command line, unless the -noautolink option is given. Addition- ally, a substring $CAMLORIGIN inside a -ccopt options will be replaced by the full path to the .cma library, excluding the filename. -absname Show absolute filenames in error messages. -annot Deprecated since OCaml 4.11. Please use -bin-annot instead. -bin-annot Dump detailed information about the compilation (types, bind- ings, tail-calls, etc) in binary format. The information for file src.ml is put into file src.cmt. In case of a type error, dump all the information inferred by the type-checker before the error. The annotation files produced by -bin-annot contain more information and are much more compact than the files produced by -annot. -c Compile only. Suppress the linking phase of the compilation. Source code files are turned into compiled files, but no exe- cutable file is produced. This option is useful to compile mod- ules separately. -cc ccomp Use ccomp as the C linker called to build the final executable and as the C compiler for compiling .c source files. -cclib -llibname Pass the -llibname option to the linker. This causes the given C library to be linked with the program. -ccopt option Pass the given option to the C compiler and linker. For in- stance, -ccopt -Ldir causes the C linker to search for C li- braries in directory dir. -color mode Enable or disable colors in compiler messages (especially warn- ings and errors). The following modes are supported: auto use heuristics to enable colors only if the output supports them (an ANSI-compatible tty terminal); always enable colors unconditionally; never disable color output. The default setting is auto, and the current heuristic checks that the "TERM" environment variable exists and is not empty or "dumb", and that isatty(stderr) holds. The environment variable "OCAML_COLOR" is considered if -color is not provided. Its values are auto/always/never as above. -error-style mode Control the way error messages and warnings are printed. The following modes are supported: short only print the error and its location; contextual like "short", but also display the source code snip- pet corresponding to the location of the error. The default setting is contextual. The environment variable "OCAML_ERROR_STYLE" is considered if -error-style is not provided. Its values are short/contextual as above. -compact Optimize the produced code for space rather than for time. This results in smaller but slightly slower programs. The default is to optimize for speed. -config Print the version number of ocamlopt(1) and a detailed summary of its configuration, then exit. -config-var Print the value of a specific configuration variable from the -config output, then exit. If the variable does not exist, the exit code is non-zero. -depend ocamldep-args Compute dependencies, as ocamldep would do. -for-pack module-path Generate an object file (.cmx and .o files) that can later be included as a sub-module (with the given access path) of a com- pilation unit constructed with -pack. For instance, ocam- lopt -for-pack P -c A.ml will generate a.cmx and a.o files that can later be used with ocamlopt -pack -o P.cmx a.cmx. -g Add debugging information while compiling and linking. This op- tion is required in order to produce stack backtraces when the program terminates on an uncaught exception (see ocamlrun(1)). -i Cause the compiler to print all defined names (with their in- ferred types or their definitions) when compiling an implementa- tion (.ml file). No compiled files (.cmo and .cmi files) are produced. This can be useful to check the types inferred by the compiler. Also, since the output follows the syntax of inter- faces, it can help in writing an explicit interface (.mli file) for a file: just redirect the standard output of the compiler to a .mli file, and edit that file to remove all declarations of unexported names. -I directory Add the given directory to the list of directories searched for compiled interface files (.cmi), compiled object code files (.cmx), and libraries (.cmxa). By default, the current directory is searched first, then the standard library directory. Directo- ries added with -I are searched after the current directory, in the order in which they were given on the command line, but be- fore the standard library directory. See also option -nostdlib. If the given directory starts with +, it is taken relative to the standard library directory. For instance, -I +compiler-libs adds the subdirectory compiler-libs of the standard library to the search path. -impl filename Compile the file filename as an implementation file, even if its extension is not .ml. -inline n Set aggressiveness of inlining to n, where n is a positive inte- ger. Specifying -inline 0 prevents all functions from being in- lined, except those whose body is smaller than the call site. Thus, inlining causes no expansion in code size. The default ag- gressiveness, -inline 1, allows slightly larger functions to be inlined, resulting in a slight expansion in code size. Higher values for the -inline option cause larger and larger functions to become candidate for inlining, but can result in a serious increase in code size. -insn-sched Enables the instruction scheduling pass in the compiler backend. -intf filename Compile the file filename as an interface file, even if its ex- tension is not .mli. -intf-suffix string Recognize file names ending with string as interface files (in- stead of the default .mli). -keep-docs Keep documentation strings in generated .cmi files. -keep-locs Keep locations in generated .cmi files. -labels Labels are not ignored in types, labels may be used in applica- tions, and labelled parameters can be given in any order. This is the default. -linkall Force all modules contained in libraries to be linked in. If this flag is not given, unreferenced modules are not linked in. When building a library (-a flag), setting the -linkall flag forces all subsequent links of programs involving that library to link all the modules contained in the library. When compil- ing a module (option -c), setting the -linkall option ensures that this module will always be linked if it is put in a library and this library is linked. -linscan Use linear scan register allocation. Compiling with this allo- cator is faster than with the usual graph coloring allocator, sometimes quite drastically so for long functions and modules. On the other hand, the generated code can be a bit slower. -match-context-rows Set number of rows of context used during pattern matching com- pilation. Lower values cause faster compilation, but less opti- mized code. The default value is 32. -no-alias-deps Do not record dependencies for module aliases. -no-app-funct Deactivates the applicative behaviour of functors. With this op- tion, each functor application generates new types in its result and applying the same functor twice to the same argument yields two incompatible structures. -noassert Do not compile assertion checks. Note that the special form as- sert false is always compiled because it is typed specially. This flag has no effect when linking already-compiled files. -noautolink When linking .cmxa libraries, ignore -cclib and -ccopt options potentially contained in the libraries (if these options were given when building the libraries). This can be useful if a li- brary contains incorrect specifications of C libraries or C op- tions; in this case, during linking, set -noautolink and pass the correct C libraries and options on the command line. -nodynlink Allow the compiler to use some optimizations that are valid only for code that is never dynlinked. -no-insn-sched Disables the instruction scheduling pass in the compiler back- end. -nostdlib Do not automatically add the standard library directory to the list of directories searched for compiled interface files (.cmi), compiled object code files (.cmx), and libraries (.cmxa). See also option -I. -nolabels Ignore non-optional labels in types. Labels cannot be used in applications, and parameter order becomes strict. -o exec-file Specify the name of the output file produced by the linker. The default output name is a.out, in keeping with the Unix tradi- tion. If the -a option is given, specify the name of the library produced. If the -pack option is given, specify the name of the packed object file produced. If the -output-obj option is given, specify the name of the output file produced. If the -shared option is given, specify the name of plugin file pro- duced. This can also be used when compiling an interface or im- plementation file, without linking, in which case it sets the name of the cmi or cmo file, and also sets the module name to the file name up to the first dot. -opaque When compiling a .mli interface file, this has the same effect as the -opaque option of the bytecode compiler. When compiling a .ml implementation file, this produces a .cmx file without cross-module optimization information, which reduces recompila- tion on module change. -open module Opens the given module before processing the interface or imple- mentation files. If several -open options are given, they are processed in order, just as if the statements open! module1;; ... open! moduleN;; were added at the top of each file. -output-obj Cause the linker to produce a C object file instead of an exe- cutable file. This is useful to wrap OCaml code as a C library, callable from any C program. The name of the output object file must be set with the -o option. This option can also be used to produce a compiled shared/dynamic library (.so extension). -output-complete-obj Same as -output-obj except the object file produced includes the runtime and autolink libraries. -pack Build an object file (.cmx and .o files) and its associated com- piled interface (.cmi) that combines the .cmx object files given on the command line, making them appear as sub-modules of the output .cmx file. The name of the output .cmx file must be given with the -o option. For instance, ocam- lopt -pack -o P.cmx A.cmx B.cmx C.cmx generates compiled files P.cmx, P.o and P.cmi describing a compilation unit having three sub-modules A, B and C, corresponding to the contents of the ob- ject files A.cmx, B.cmx and C.cmx. These contents can be refer- enced as P.A, P.B and P.C in the remainder of the program. The .cmx object files being combined must have been compiled with the appropriate -for-pack option. In the example above, A.cmx, B.cmx and C.cmx must have been compiled with ocam- lopt -for-pack P. Multiple levels of packing can be achieved by combining -pack with -for-pack. See The OCaml user's manual, chapter "Native- code compilation" for more details. -pp command Cause the compiler to call the given command as a preprocessor for each source file. The output of command is redirected to an intermediate file, which is compiled. If there are no compila- tion errors, the intermediate file is deleted afterwards. -ppx command After parsing, pipe the abstract syntax tree through the pre- processor command. The module Ast_mapper(3) implements the ex- ternal interface of a preprocessor. -principal Check information path during type-checking, to make sure that all types are derived in a principal way. All programs accepted in -principal mode are also accepted in default mode with equiv- alent types, but different binary signatures. -rectypes Allow arbitrary recursive types during type-checking. By de- fault, only recursive types where the recursion goes through an object type are supported. Note that once you have created an interface using this flag, you must use it again for all depen- dencies. -runtime-variant suffix Add suffix to the name of the runtime library that will be used by the program. If OCaml was configured with option -with-de- bug-runtime, then the d suffix is supported and gives a debug version of the runtime. -S Keep the assembly code produced during the compilation. The as- sembly code for the source file x.ml is saved in the file x.s. -stop-after pass Stop compilation after the given compilation pass. The currently supported passes are: parsing, typing, scheduling, emit. -save-ir-after pass Save intermediate representation after the given compilation pass. The currently supported passes are: scheduling. -safe-string Enforce the separation between types string and bytes, thereby making strings read-only. This is the default. -shared Build a plugin (usually .cmxs) that can be dynamically loaded with the Dynlink module. The name of the plugin must be set with the -o option. A plugin can include a number of OCaml modules and libraries, and extra native objects (.o, .a files). Build- ing native plugins is only supported for some operating system. Under some systems (currently, only Linux AMD 64), all the OCaml code linked in a plugin must have been compiled without the -no- dynlink flag. Some constraints might also apply to the way the extra native objects have been compiled (under Linux AMD 64, they must contain only position-independent code). -short-paths When a type is visible under several module-paths, use the shortest one when printing the type's name in inferred inter- faces and error and warning messages. -strict-sequence The left-hand part of a sequence must have type unit. -unboxed-types When a type is unboxable (i.e. a record with a single argument or a concrete datatype with a single constructor of one argu- ment) it will be unboxed unless annotated with [@@ocaml.boxed]. -no-unboxed-types When a type is unboxable it will be boxed unless annotated with [@@ocaml.unboxed]. This is the default. -unsafe Turn bound checking off for array and string accesses (the v.(i)ands.[i] constructs). Programs compiled with -unsafe are therefore faster, but unsafe: anything can happen if the program accesses an array or string outside of its bounds. Additionally, turn off the check for zero divisor in integer division and mod- ulus operations. With -unsafe, an integer division (or modulus) by zero can halt the program or continue with an unspecified re- sult instead of raising a Division_by_zero exception. -unsafe-string Identify the types string and bytes, thereby making strings writable. This is intended for compatibility with old source code and should not be used with new software. -v Print the version number of the compiler and the location of the standard library directory, then exit. -verbose Print all external commands before they are executed, in partic- ular invocations of the assembler, C compiler, and linker. -version or -vnum Print the version number of the compiler in short form (e.g. "3.11.0"), then exit. -w warning-list Enable, disable, or mark as fatal the warnings specified by the argument warning-list. See ocamlc(1) for the syntax of warning- list. -warn-error warning-list Mark as fatal the warnings specified in the argument warn- ing-list. The compiler will stop with an error when one of these warnings is emitted. The warning-list has the same mean- ing as for the -w option: a + sign (or an uppercase letter) marks the corresponding warnings as fatal, a - sign (or a lower- case letter) turns them back into non-fatal warnings, and a @ sign both enables and marks as fatal the corresponding warnings. Note: it is not recommended to use the -warn-error option in production code, because it will almost certainly prevent com- piling your program with later versions of OCaml when they add new warnings or modify existing warnings. The default setting is -warn-error -a+31 (only warning 31 is fa- tal). -warn-help Show the description of all available warning numbers. -where Print the location of the standard library, then exit. -with-runtime Include the runtime system in the generated program. This is the default. -without-runtime The compiler does not include the runtime system (nor a refer- ence to it) in the generated program; it must be supplied sepa- rately. - file Process file as a file name, even if it starts with a dash (-) character. -help or --help Display a short usage summary and exit. OPTIONS FOR THE IA32 ARCHITECTURE The IA32 code generator (Intel Pentium, AMD Athlon) supports the fol- lowing additional option: -ffast-math Use the IA32 instructions to compute trigonometric and exponen- tial functions, instead of calling the corresponding library routines. The functions affected are: atan, atan2, cos, log, log10, sin, sqrt and tan. The resulting code runs faster, but the range of supported arguments and the precision of the result can be reduced. In particular, trigonometric operations cos, sin, tan have their range reduced to [-2^64, 2^64]. OPTIONS FOR THE AMD64 ARCHITECTURE The AMD64 code generator (64-bit versions of Intel Pentium and AMD Athlon) supports the following additional options: -fPIC Generate position-independent machine code. This is the de- fault. -fno-PIC Generate position-dependent machine code. OPTIONS FOR THE POWER ARCHITECTURE The PowerPC code generator supports the following additional options: -flarge-toc Enables the PowerPC large model allowing the TOC (table of con- tents) to be arbitrarily large. This is the default since 4.11. -fsmall-toc Enables the PowerPC small model allowing the TOC to be up to 64 kbytes per compilation unit. Prior to 4.11 this was the default behaviour. \nd{options} OPTIONS FOR THE ARM ARCHITECTURE The ARM code generator supports the following additional options: -farch=armv4|armv5|armv5te|armv6|armv6t2|armv7 Select the ARM target architecture -ffpu=soft|vfpv2|vfpv3-d16|vfpv3 Select the floating-point hardware -fPIC Generate position-independent machine code. -fno-PIC Generate position-dependent machine code. This is the default. -fthumb Enable Thumb/Thumb-2 code generation -fno-thumb Disable Thumb/Thumb-2 code generation The default values for target architecture, floating-point hardware and thumb usage were selected at configure-time when building ocamlopt it- self. This configuration can be inspected using ocamlopt -config. Tar- get architecture depends on the "model" setting, while floating-point hardware and thumb support are determined from the ABI setting in "sys- tem" ( linux_eabiorlinux_eabihf). SEE ALSO ocamlc(1). The OCaml user's manual, chapter "Native-code compilation". OCAMLOPT(1)
Generated by dwww version 1.15 on Mon Jul 1 04:37:02 CEST 2024.