SS(8) System Manager's Manual SS(8)
NAME
ss - another utility to investigate sockets
SYNOPSIS
ss [options] [ FILTER ]
DESCRIPTION
ss is used to dump socket statistics. It allows showing information
similar to netstat. It can display more TCP and state information than
other tools.
OPTIONS
When no option is used ss displays a list of open non-listening sockets
(e.g. TCP/UNIX/UDP) that have established connection.
-h, --help
Show summary of options.
-V, --version
Output version information.
-H, --no-header
Suppress header line.
-O, --oneline
Print each socket's data on a single line.
-n, --numeric
Do not try to resolve service names. Show exact bandwidth val-
ues, instead of human-readable.
-r, --resolve
Try to resolve numeric address/ports.
-a, --all
Display both listening and non-listening (for TCP this means es-
tablished connections) sockets.
-l, --listening
Display only listening sockets (these are omitted by default).
-o, --options
Show timer information. For TCP protocol, the output format is:
timer:(<timer_name>,<expire_time>,<retrans>)
<timer_name>
the name of the timer, there are five kind of timer
names:
on : means one of these timers: TCP retrans timer, TCP
early retrans timer and tail loss probe timer
keepalive: tcp keep alive timer
timewait: timewait stage timer
persist: zero window probe timer
unknown: none of the above timers
<expire_time>
how long time the timer will expire
<retrans>
how many times the retransmission occurred
-e, --extended
Show detailed socket information. The output format is:
uid:<uid_number> ino:<inode_number> sk:<cookie>
<uid_number>
the user id the socket belongs to
<inode_number>
the socket's inode number in VFS
<cookie>
an uuid of the socket
-m, --memory
Show socket memory usage. The output format is:
skmem:(r<rmem_alloc>,rb<rcv_buf>,t<wmem_alloc>,tb<snd_buf>,
f<fwd_alloc>,w<wmem_queued>,o<opt_mem>,
bl<back_log>,d<sock_drop>)
<rmem_alloc>
the memory allocated for receiving packet
<rcv_buf>
the total memory can be allocated for receiving packet
<wmem_alloc>
the memory used for sending packet (which has been sent
to layer 3)
<snd_buf>
the total memory can be allocated for sending packet
<fwd_alloc>
the memory allocated by the socket as cache, but not used
for receiving/sending packet yet. If need memory to
send/receive packet, the memory in this cache will be
used before allocate additional memory.
<wmem_queued>
The memory allocated for sending packet (which has not
been sent to layer 3)
<opt_mem>
The memory used for storing socket option, e.g., the key
for TCP MD5 signature
<back_log>
The memory used for the sk backlog queue. On a process
context, if the process is receiving packet, and a new
packet is received, it will be put into the sk backlog
queue, so it can be received by the process immediately
<sock_drop>
the number of packets dropped before they are de-multi-
plexed into the socket
-p, --processes
Show process using socket.
-T, --threads
Show thread using socket. Implies -p. -p.
-i, --info
Show internal TCP information. Below fields may appear:
ts show string "ts" if the timestamp option is set
sack show string "sack" if the sack option is set
ecn show string "ecn" if the explicit congestion notification
option is set
ecnseen
show string "ecnseen" if the saw ecn flag is found in re-
ceived packets
fastopen
show string "fastopen" if the fastopen option is set
cong_alg
the congestion algorithm name, the default congestion al-
gorithm is "cubic"
wscale:<snd_wscale>:<rcv_wscale>
if window scale option is used, this field shows the send
scale factor and receive scale factor
rto:<icsk_rto>
tcp re-transmission timeout value, the unit is millisec-
ond
backoff:<icsk_backoff>
used for exponential backoff re-transmission, the actual
re-transmission timeout value is icsk_rto << icsk_backoff
rtt:<rtt>/<rttvar>
rtt is the average round trip time, rttvar is the mean
deviation of rtt, their units are millisecond
ato:<ato>
ack timeout, unit is millisecond, used for delay ack mode
mss:<mss>
max segment size
cwnd:<cwnd>
congestion window size
pmtu:<pmtu>
path MTU value
ssthresh:<ssthresh>
tcp congestion window slow start threshold
bytes_acked:<bytes_acked>
bytes acked
bytes_received:<bytes_received>
bytes received
segs_out:<segs_out>
segments sent out
segs_in:<segs_in>
segments received
send <send_bps>bps
egress bps
lastsnd:<lastsnd>
how long time since the last packet sent, the unit is
millisecond
lastrcv:<lastrcv>
how long time since the last packet received, the unit is
millisecond
lastack:<lastack>
how long time since the last ack received, the unit is
millisecond
pacing_rate <pacing_rate>bps/<max_pacing_rate>bps
the pacing rate and max pacing rate
rcv_space:<rcv_space>
a helper variable for TCP internal auto tuning socket re-
ceive buffer
tcp-ulp-mptcp flags:[MmBbJjecv] token:<rem_token(rem_id)/loc_to-
ken(loc_id)> seq:<sn> sfseq:<ssn> ssnoff:<off> maplen:<maplen>
MPTCP subflow information
--tos Show ToS and priority information. Below fields may appear:
tos IPv4 Type-of-Service byte
tclass IPv6 Traffic Class byte
class_id
Class id set by net_cls cgroup. If class is zero this
shows priority set by SO_PRIORITY.
--cgroup
Show cgroup information. Below fields may appear:
cgroup Cgroup v2 pathname. This pathname is relative to the
mount point of the hierarchy.
--tipcinfo
Show internal tipc socket information.
-K, --kill
Attempts to forcibly close sockets. This option displays
sockets that are successfully closed and silently skips
sockets that the kernel does not support closing. It sup-
ports IPv4 and IPv6 sockets only.
-s, --summary
Print summary statistics. This option does not parse
socket lists obtaining summary from various sources. It
is useful when amount of sockets is so huge that parsing
/proc/net/tcp is painful.
-E, --events
Continually display sockets as they are destroyed
-Z, --context
As the -p option but also shows process security context.
If the -T option is used, also shows thread security con-
text.
For netlink(7) sockets the initiating process context is
displayed as follows:
1. If valid pid show the process context.
2. If destination is kernel (pid = 0) show kernel
initial context.
3. If a unique identifier has been allocated by
the kernel or netlink user, show context as
"unavailable". This will generally indicate
that a process has more than one netlink
socket active.
-z, --contexts
As the -Z option but also shows the socket context. The
socket context is taken from the associated inode and is
not the actual socket context held by the kernel. Sockets
are typically labeled with the context of the creating
process, however the context shown will reflect any pol-
icy role, type and/or range transition rules applied, and
is therefore a useful reference.
-N NSNAME, --net=NSNAME
Switch to the specified network namespace name.
-b, --bpf
Show socket classic BPF filters (only administrators are
allowed to get these information).
-4, --ipv4
Display only IP version 4 sockets (alias for -f inet).
-6, --ipv6
Display only IP version 6 sockets (alias for -f inet6).
-0, --packet
Display PACKET sockets (alias for -f link).
-t, --tcp
Display TCP sockets.
-u, --udp
Display UDP sockets.
-d, --dccp
Display DCCP sockets.
-w, --raw
Display RAW sockets.
-x, --unix
Display Unix domain sockets (alias for -f unix).
-S, --sctp
Display SCTP sockets.
--tipc Display tipc sockets (alias for -f tipc).
--vsock
Display vsock sockets (alias for -f vsock).
--xdp Display XDP sockets (alias for -f xdp).
-M, --mptcp
Display MPTCP sockets.
--inet-sockopt
Display inet socket options.
-f FAMILY, --family=FAMILY
Display sockets of type FAMILY. Currently the following
families are supported: unix, inet, inet6, link, netlink,
vsock, tipc, xdp.
-A QUERY, --query=QUERY, --socket=QUERY
List of socket tables to dump, separated by commas. The
following identifiers are understood: all, inet, tcp,
udp, raw, unix, packet, netlink, unix_dgram, unix_stream,
unix_seqpacket, packet_raw, packet_dgram, dccp, sctp,
tipc, vsock_stream, vsock_dgram, xdp, mptcp. Any item in
the list may optionally be prefixed by an exclamation
mark (!) to exclude that socket table from being dumped.
-D FILE, --diag=FILE
Do not display anything, just dump raw information about
TCP sockets to FILE after applying filters. If FILE is -
stdout is used.
-F FILE, --filter=FILE
Read filter information from FILE. Each line of FILE is
interpreted like single command line option. If FILE is -
stdin is used.
FILTER := [ state STATE-FILTER ] [ EXPRESSION ]
Please take a look at the official documentation for de-
tails regarding filters.
STATE-FILTER
STATE-FILTER allows one to construct arbitrary set of states to match.
Its syntax is sequence of keywords state and exclude followed by iden-
tifier of state.
Available identifiers are:
All standard TCP states: established, syn-sent, syn-recv, fin-
wait-1, fin-wait-2, time-wait, closed, close-wait, last-ack,
listening and closing.
all - for all the states
connected - all the states except for listening and closed
synchronized - all the connected states except for syn-sent
bucket - states, which are maintained as minisockets, i.e.
time-wait and syn-recv
big - opposite to bucket
EXPRESSION
EXPRESSION allows filtering based on specific criteria. EXPRESSION
consists of a series of predicates combined by boolean operators. The
possible operators in increasing order of precedence are or (or | or
||), and (or & or &&), and not (or !). If no operator is between con-
secutive predicates, an implicit and operator is assumed. Subexpres-
sions can be grouped with "(" and ")".
The following predicates are supported:
{dst|src} [=] HOST
Test if the destination or source matches HOST. See HOST SYNTAX
for details.
{dport|sport} [OP] [FAMILY:]:PORT
Compare the destination or source port to PORT. OP can be any of
"<", "<=", "=", "!=", ">=" and ">". Following normal arithmetic
rules. FAMILY and PORT are as described in HOST SYNTAX below.
dev [=|!=] DEVICE
Match based on the device the connection uses. DEVICE can either
be a device name or the index of the interface.
fwmark [=|!=] MASK
Matches based on the fwmark value for the connection. This can
either be a specific mark value or a mark value followed by a
"/" and a bitmask of which bits to use in the comparison. For
example "fwmark = 0x01/0x03" would match if the two least sig-
nificant bits of the fwmark were 0x01.
cgroup [=|!=] PATH
Match if the connection is part of a cgroup at the given path.
autobound
Match if the port or path of the source address was automati-
cally allocated (rather than explicitly specified).
Most operators have aliases. If no operator is supplied "=" is assumed.
Each of the following groups of operators are all equivalent:
• = == eq
• != ne neq
• > gt
• < lt
• >= ge geq
• <= le leq
• ! not
• | || or
• & && and
HOST SYNTAX
The general host syntax is [FAMILY:]ADDRESS[:PORT].
FAMILY must be one of the families supported by the -f option. If not
given it defaults to the family given with the -f option, and if that
is also missing, will assume either inet or inet6. Note that all host
conditions in the expression should either all be the same family or be
only inet and inet6. If there is some other mixture of families, the
results will probably be unexpected.
The form of ADDRESS and PORT depends on the family used. "*" can be
used as a wildcard for either the address or port. The details for each
family are as follows:
unix ADDRESS is a glob pattern (see fnmatch(3)) that will be matched
case-insensitively against the unix socket's address. Both path
and abstract names are supported. Unix addresses do not support
a port, and "*" cannot be used as a wildcard.
link ADDRESS is the case-insensitive name of an Ethernet protocol to
match. PORT is either a device name or a device index for the
desired link device, as seen in the output of ip link.
netlink
ADDRESS is a descriptor of the netlink family. Possible values
come from /etc/iproute2/nl_protos. PORT is the port id of the
socket, which is usually the same as the owning process id. The
value "kernel" can be used to represent the kernel (port id of
0).
vsock ADDRESS is an integer representing the CID address, and PORT is
the port.
inet and inet6
ADDRESS is an ip address (either v4 or v6 depending on the fam-
ily) or a DNS hostname that resolves to an ip address of the re-
quired version. An ipv6 address must be enclosed in "[" and "]"
to disambiguate the port separator. The address may additionally
have a prefix length given in CIDR notation (a slash followed by
the prefix length in bits). PORT is either the numerical socket
port, or the service name for the port to match.
USAGE EXAMPLES
ss -t -a
Display all TCP sockets.
ss -t -a -Z
Display all TCP sockets with process SELinux security contexts.
ss -u -a
Display all UDP sockets.
ss -o state established '( dport = :ssh or sport = :ssh )'
Display all established ssh connections.
ss -x src /tmp/.X11-unix/*
Find all local processes connected to X server.
ss -o state fin-wait-1 '( sport = :http or sport = :https )' dst
193.233.7/24
List all the tcp sockets in state FIN-WAIT-1 for our apache to
network 193.233.7/24 and look at their timers.
ss -a -A 'all,!tcp'
List sockets in all states from all socket tables but TCP.
SEE ALSO
ip(8),
RFC 793 - https://tools.ietf.org/rfc/rfc793.txt (TCP states)
AUTHOR
ss was written by Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>.
This manual page was written by Michael Prokop <mika@grml.org> for the
Debian project (but may be used by others).
SS(8)
Generated by dwww version 1.15 on Thu Jun 20 13:53:23 CEST 2024.