BTRFS-SELECT-SUPER(8) BTRFS BTRFS-SELECT-SUPER(8)
NAME
btrfs-select-super - overwrite primary superblock with a backup copy
SYNOPSIS
btrfs-select-super -s number <device>
DESCRIPTION
Destructively overwrite all copies of the superblock with a specified
copy. This helps in certain cases, for example when write barriers
were disabled during a power failure and not all superblocks were writ-
ten, or if the primary superblock is damaged, e.g. accidentally over-
written.
The filesystem specified by device must not be mounted.
NOTE:
Prior to overwriting the primary superblock, please make sure that
the backup copies are valid!
To dump a superblock use the btrfs inspect-internal dump-super command.
Then run the check (in the non-repair mode) using the command btrfs
check -s where -s specifies the superblock copy to use.
Superblock copies exist in the following offsets on the device:
• primary: 64KiB (65536)
• 1st copy: 64MiB (67108864)
• 2nd copy: 256GiB (274877906944)
A superblock size is 4KiB (4096).
OPTIONS
-s|--super <N>
use Nth superblock copy, valid values are 0 1 or 2 if the re-
spective superblock offset is within the device size
SEE ALSO
btrfs(8)
6.2 Feb 28, 2023 BTRFS-SELECT-SUPER(8)
Generated by dwww version 1.15 on Fri Jun 28 02:24:19 CEST 2024.