sane-sm3840(5) SANE Scanner Access Now Easy sane-sm3840(5) NAME sane-sm3840 - SANE backend for Microtek scanners with SCAN08 USB chip DESCRIPTION The sane-sm3840 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the SCAN08 USB chip. There exist backends for Microtek scanners with SCSI command set. Re- fer to sane-microtek(5) and sane-microtek2(5) for details. There also exists a Microtek 3600 series driver, see sane-sm3600(5) for details. At present, the following scanners are known positively to work with this backend: Vendor Product ID: Remark: -------- -------------- ----------- Microtek ScanMaker 3840 All modes OK Microtek ScanMaker 4800 All modes OK If you own a Microtek scanner with the SCAN08 chip other than the ones listed above, it may or may not work with SANE. Feel free to contact the backend author (earle@ziplabel.com) to report results with scanners not on the list. FRONTEND OPTIONS The following options are supported by the sane-sm3840 driver: --mode color|gray|lineart|halftone Color or grayscale mode. --resolution 150|300|600|1200 Pixels per inch for scans. --depth 8|16 Note that the least significant bits of 16bpp mode may be noise. --brightness 1..4096 Higher numbers increase brightness of returned image. --contrast 0.1..9.9 Larger numbers decrease contrast of returned image. --lamp-timeout 1..15 Time in minutes until the lamp is turned off after a scan. CONFIGURATION This backend does not support a configuration file right now. FILES /usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.a The static library implementing this backend. /usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so The shared library implementing this backend (present on systems that support dynamic loading). ENVIRONMENT SANE_DEBUG_SM3840 If the library was compiled with debug support enabled, this en- vironment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. To see error messages on stderr set SANE_DEBUG_SM3840 to 1. SEE ALSO sane(7), sane-microtek(5), sane-microtek2(5), sane-sm3600(5) http://www.ziplabel.com/sm3840 AUTHOR Earle F. Philhower III <earle@ziplabel.com> 11 Jul 2008 sane-sm3840(5)
Generated by dwww version 1.15 on Tue Jun 25 14:42:29 CEST 2024.