dwww Home | Manual pages | Find package

sane-ricoh(5)            SANE Scanner Access Now Easy            sane-ricoh(5)

NAME
       sane-ricoh - SANE backend for Ricoh flatbed scanners

DESCRIPTION
       The  sane-ricoh  library  implements  a  SANE (Scanner Access Now Easy)
       backend that provides access to the following Ricoh flatbed scanners:

              IS50
              IS60

DEVICE NAMES
       This backend expects device names of the form:

              special

       Where special is the path-name for the special device that  corresponds
       to  a  SCSI scanner. The special device name must be a generic SCSI de-
       vice or a symlink to such a device.  The  program  sane-find-scanner(1)
       helps  to  find out the correct device. Under Linux, such a device name
       could be /dev/sga or /dev/sge, for example.  See sane-scsi(5)  for  de-
       tails.

FILES
       /etc/sane.d/ricoh.conf
              The   backend   configuration  file  (see  also  description  of
              SANE_CONFIG_DIR below).

       /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.a
              The static library implementing this backend.

       /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  On *NIX systems, the direc-
              tories are separated by a colon (`:'), under OS/2, they are sep-
              arated by a semi-colon (`;').  If this variable is not set,  the
              configuration  file  is  searched  in  two  default directories:
              first,  the  current  working  directory  (".")  and   then   in
              /etc/sane.d.  If the value of the environment variable ends with
              the directory separator character, then the default  directories
              are  searched  after  the explicitly specified directories.  For
              example, setting SANE_CONFIG_DIR to "/tmp/config:" would  result
              in directories tmp/config, ., and /etc/sane.d being searched (in
              this order).

       SANE_DEBUG_RICOH
              If the library was compiled with debug support enabled, this en-
              vironment  variable  controls  the debug level for this backend.
              Higher debug levels increase the verbosity of the output.

              Example: export SANE_DEBUG_RICOH=4

SEE ALSO
       sane(7), sane-scsi(5), sane-find-scanner(1)

AUTHOR
       Feico W. Dillema

                                  14 Jul 2008                    sane-ricoh(5)

Generated by dwww version 1.15 on Wed Jun 26 01:11:53 CEST 2024.