MLX5DV_WR(3) mlx5 Programmer’s Manual MLX5DV_WR(3)
NAME
mlx5dv_wr_set_dc_addr - Attach a DC info to the last work request
mlx5dv_wr_raw_wqe - Build a raw work request
mlx5dv_wr_memcpy - Build a DMA memcpy work request
SYNOPSIS
#include <infiniband/mlx5dv.h>
static inline void mlx5dv_wr_set_dc_addr(struct mlx5dv_qp_ex *mqp,
struct ibv_ah *ah,
uint32_t remote_dctn,
uint64_t remote_dc_key);
static inline void mlx5dv_wr_set_dc_addr_stream(struct mlx5dv_qp_ex *mqp,
struct ibv_ah *ah,
uint32_t remote_dctn,
uint64_t remote_dc_key,
uint16_t stream_id);
struct mlx5dv_mr_interleaved {
uint64_t addr;
uint32_t bytes_count;
uint32_t bytes_skip;
uint32_t lkey;
};
static inline void mlx5dv_wr_mr_interleaved(struct mlx5dv_qp_ex *mqp,
struct mlx5dv_mkey *mkey,
uint32_t access_flags, /* use enum ibv_access_flags */
uint32_t repeat_count,
uint16_t num_interleaved,
struct mlx5dv_mr_interleaved *data);
static inline void mlx5dv_wr_mr_list(struct mlx5dv_qp_ex *mqp,
struct mlx5dv_mkey *mkey,
uint32_t access_flags, /* use enum ibv_access_flags */
uint16_t num_sges,
struct ibv_sge *sge);
static inline int mlx5dv_wr_raw_wqe(struct mlx5dv_qp_ex *mqp, const void *wqe);
static inline void mlx5dv_wr_memcpy(struct mlx5dv_qp_ex *mqp_ex,
uint32_t dest_lkey, uint64_t dest_addr,
uint32_t src_lkey, uint64_t src_addr,
size_t length)
DESCRIPTION
The MLX5DV work request APIs (mlx5dv_wr_*) is an extension for IBV work
request API (ibv_wr_*) with mlx5 specific features for send work re-
quest. This may be used together with or without ibv_wr_* calls.
USAGE
To use these APIs a QP must be created using mlx5dv_create_qp() with
send_ops_flags of struct ibv_qp_init_attr_ex set.
If the QP does not support all the requested work request types then QP
creation will fail.
The mlx5dv_qp_ex is extracted from the IBV_QP by ibv_qp_to_qp_ex() and
mlx5dv_qp_ex_from_ibv_qp_ex(). This should be used to apply the mlx5
specific features on the posted WR.
A work request creation requires to use the ibv_qp_ex as described in
the man for ibv_wr_post and mlx5dv_qp with its available builders and
setters.
QP Specific builders
RC QPs mlx5dv_wr_mr_interleaved()
registers an interleaved memory layout by using an indirect mkey
and some interleaved data. The layout of the memory pointed by
the mkey after its registration will be the data representation
for the num_interleaved entries. This single layout representa-
tion is repeated by repeat_count.
The data as described by struct mlx5dv_mr_interleaved will hold
real data defined by bytes_count and then a padding of
bytes_skip. Post a successful registration, RDMA operations can
use this mkey. The hardware will scatter the data according to
the pattern. The mkey should be used in a zero-based mode. The
addr field in its ibv_sge is an offset in the total data. To
create this mkey mlx5dv_create_mkey() should be used.
Current implementation requires the IBV_SEND_INLINE option to be
on in ibv_qp_ex->wr_flags field. To be able to have more than 3
num_interleaved entries, the QP should be created with a larger
WQE size that may fit it. This should be done using the max_in-
line_data attribute of struct ibv_qp_cap upon its creation.
As one entry will be consumed for strided header, the mkey
should be created with one more entry than the required num_in-
terleaved.
In case ibv_qp_ex->wr_flags turns on IBV_SEND_SIGNALED, the re-
ported WC opcode will be MLX5DV_WC_UMR. Unregister the mkey to
enable another pattern registration should be done via
ibv_post_send with IBV_WR_LOCAL_INV opcode.
mlx5dv_wr_mr_list()
registers a memory layout based on list of ibv_sge. The layout
of the memory pointed by the mkey after its registration will be
based on the list of sge counted by num_sges. Post a successful
registration RDMA operations can use this mkey, the hardware
will scatter the data according to the pattern. The mkey should
be used in a zero-based mode, the addr field in its ibv_sge is
an offset in the total data.
Current implementation requires the IBV_SEND_INLINE option to be
on in ibv_qp_ex->wr_flags field. To be able to have more than 4
num_sge entries, the QP should be created with a larger WQE size
that may fit it. This should be done using the max_inline_data
attribute of struct ibv_qp_cap upon its creation.
In case ibv_qp_ex->wr_flags turns on IBV_SEND_SIGNALED, the re-
ported WC opcode will be MLX5DV_WC_UMR. Unregister the mkey to
enable other pattern registration should be done via
ibv_post_send with IBV_WR_LOCAL_INV opcode.
RC or DCI QPs
mlx5dv_wr_memcpy()
Builds a DMA memcpy work request to copy data of length length
from src_addr to dest_addr. The copy operation will be done us-
ing the DMA MMO functionality of the device to copy data on PCI
bus.
The MLX5DV_QP_EX_WITH_MEMCPY flag in mlx5dv_qp_init_at-
tr.send_ops_flags needs to be set during QP creation. If the
device or QP doesn’t support it then QP creation will fail. The
maximum memcpy length that is supported by the device is report-
ed in mlx5dv_context->max_wr_memcpy_length. A zero value in
mlx5dv_context->max_wr_memcpy_length means the device doesn’t
support memcpy operations.
IBV_SEND_FENCE indicator should be used on a following send re-
quest which is dependent on dest_addr of the memcpy operation.
In case ibv_qp_ex->wr_flags turns on IBV_SEND_SIGNALED, the re-
ported WC opcode will be MLX5DV_WC_MEMCPY.
Raw WQE builders
mlx5dv_wr_raw_wqe()
It is used to build a custom work request (WQE) and post it on a
normal QP. The caller needs to set all details of the WQE (ex-
cept the “ctrl.wqe_index” and “ctrl.signature” fields, which is
the driver’s responsibility to set). The
MLX5DV_QP_EX_WITH_RAW_WQE flag in mlx5_qp_attr.send_ops_flags
needs to be set.
The wr_flags are ignored as it’s the caller’s responsibility to
set flags in WQE.
No matter what the send opcode is, the work completion opcode
for a raw WQE is IBV_WC_DRIVER2.
QP Specific setters
DCI QPs
mlx5dv_wr_set_dc_addr() must be called to set the DCI WR proper-
ties. The destination address of the work is specified by ah,
the remote DCT number is specified by remote_dctn and the DC key
is specified by remote_dc_key. This setter is available when
the QP transport is DCI and send_ops_flags in struct
ibv_qp_init_attr_ex is set. The available builders and setters
for DCI QP are the same as RC QP. DCI QP created with
MLX5DV_QP_INIT_ATTR_MASK_DCI_STREAMS can call
mlx5dv_wr_set_dc_addr_stream() to define the stream_id of the
operation to allow HW to choose one of the multiple concurrent
DCI resources. Calls to mlx5dv_wr_set_dc_addr() are equivalent
to using stream_id=0
EXAMPLE
/* create DC QP type and specify the required send opcodes */
attr_ex.qp_type = IBV_QPT_DRIVER;
attr_ex.comp_mask |= IBV_QP_INIT_ATTR_SEND_OPS_FLAGS;
attr_ex.send_ops_flags |= IBV_QP_EX_WITH_RDMA_WRITE;
attr_dv.comp_mask |= MLX5DV_QP_INIT_ATTR_MASK_DC;
attr_dv.dc_init_attr.dc_type = MLX5DV_DCTYPE_DCI;
ibv_qp *qp = mlx5dv_create_qp(ctx, attr_ex, attr_dv);
ibv_qp_ex *qpx = ibv_qp_to_qp_ex(qp);
mlx5dv_qp_ex *mqpx = mlx5dv_qp_ex_from_ibv_qp_ex(qpx);
ibv_wr_start(qpx);
/* Use ibv_qp_ex object to set WR generic attributes */
qpx->wr_id = my_wr_id_1;
qpx->wr_flags = IBV_SEND_SIGNALED;
ibv_wr_rdma_write(qpx, rkey, remote_addr_1);
ibv_wr_set_sge(qpx, lkey, local_addr_1, length_1);
/* Use mlx5 DC setter using mlx5dv_qp_ex object */
mlx5dv_wr_set_wr_dc_addr(mqpx, ah, remote_dctn, remote_dc_key);
ret = ibv_wr_complete(qpx);
SEE ALSO
ibv_post_send(3), ibv_create_qp_ex(3), ibv_wr_post(3), mlx5dv_cre-
ate_mkey(3).
AUTHOR
Guy Levi <guyle@mellanox.com>
Mark Zhang <markzhang@nvidia.com>
mlx5 2019-02-24 MLX5DV_WR(3)
Generated by dwww version 1.15 on Wed Jun 26 18:07:21 CEST 2024.