Date::Manip::Obj(3pm) User Contributed Perl DocumentationDate::Manip::Obj(3pm)
NAME
Date::Manip::Obj - Base class for Date::Manip objects
SYNOPSIS
The Date::Manip::Obj class is the base class used for the following
Date::Manip classes:
Date::Manip::Base
Date::Manip::TZ
Date::Manip::Date
Date::Manip::Delta
Date::Manip::Recur
This module is not intended to be called directly and performs no
useful function by itself. Instead, use the various derived classes
which inherit from it.
DESCRIPTION
This module contains a set of methods used by all Date::Manip classes
listed above.
You should be familiar with the Date::Manip::Objects and
Date::Manip::Config documentation.
In the method descriptions below, Date::Manip::Date objects will
usually be used as examples, but (unless otherwise stated), all of the
classes listed above have the same methods, and work in the same
fashion.
METHODS FOR CREATING OBJECTS
In the examples below, any variable named some variation of $date
($date, $date1, $date2, ...) is a Date::Manip::Date object. Similarly,
$delta, $recur, $tz, and $base refer to objects in the appropriate
class.
Any $obj variable refers to an object in any of the classes.
new There are two ways to use the new method. They are:
$obj2 = new CLASS ($obj1,$string,@parse_opts,\@opts);
$obj2 = $obj1->new($string,@parse_opts,\@opts)
In both cases, all arguments are optional.
Both methods are used to create a new object of a given class. In
the first case, CLASS is the class of the new object. For example:
$date = new Date::Manip::Date;
$delta = new Date::Manip::Delta;
In the second method, the class of the new object will be derived
from the first object. For example:
$date1 = new Date::Manip::Date;
$date2 = $date1->new();
the class of the second object ($date2) is Date::Manip::Date
because that is the class of the object ($date1) used to create it.
In both first method (when a $obj1 is passed in) and always in the
second method, the new object will share as much information from
the old object ($obj1) as possible.
For example, if you call either of these:
$date2 = new Date::Manip::Date $date1;
$date2 = $date1->new();
the new date object will use the same embedded Date::Manip::TZ and
Date::Manip::Base objects.
When specifying CLASS and including an old object, objects do not
need to be of the same class. For example, the following are all
valid:
$date = new Date::Manip::Date $delta;
$date = new Date::Manip::Date $tz;
You can even do:
$date = new Date::Manip::Date $base;
but this will have to create a completely new Date::Manip::TZ
object, which means that optimal performance may not be achieved if
a Date::Manip::TZ object already exists.
There are two special cases. Either of the following will create a
new Date::Manip::Base object for handling multiple configurations:
$base2 = new Date::Manip::Base $base1;
$base2 = $base1->new();
Either of the following will create a new Date::Manip::TZ object
with the same Date::Manip::Base object embedded in it:
$tz2 = new Date::Manip::TZ $tz1;
$tz2 = $tz1->new();
The new base object will initially have the same configuration as
the original base object, but changing it's configuration will not
affect the original base object.
If the "\@opts" argument is passed in, it is a list reference
containing a list suitable for passing to the config method
(described below). In this case, a new Date::Manip::Base object
(and perhaps Date::Manip::TZ object) will be created. The new Base
object will start as identical to the original one (if a previously
defined object was used to create the new object) with the
additional options in @opts added.
In other words, the following are equivalent:
$date = new Date::Manip::Date $obj,\@opts;
$base = $obj->base();
$base2 = $base->new();
$date = new Date::Manip::Date $base2;
$date->config(@opts);
It should be noted that the options are applied to the NEW
Date::Manip::Base object, not the old one.
An optional string ($string and parse opts @parse_opts) may be
passed in only when creating a Date::Manip::Date,
Date::Manip::Delta, or Date::Manip::Recur object. If passed in
when creating a Date::Manip::TZ or Date::Manip::Base object, a
warning will be issued, but execution will continue.
If the string is included, it will be parsed to give an initial
value to the object. This will only be done AFTER any options are
handled, so the following are equivalent:
$date = new Date::Manip::Date $string,@parse_opts,\@opts;
$date = new Date::Manip::Date;
$date->config(@opts);
$date->parse($string,@parse_opts);
Once a Date::Manip::Date object (or any object in any other
Date::Manip class) is created, it should always be used to create
additional objects in order to preserve cached data for optimal
performance and memory usage.
The one caveat is if you are working with multiple configurations
as described in the Date::Manip::Objects document. In that case,
you may need to create completely new objects to allow multiple
Date::Manip::Base objects to be used.
new_config
$obj2 = $obj1->new_config($string,\@opts);
This creates a new instance with a new Date::Manip::Base object
(and possibly a new Date::Manip::TZ object).
For example,
$date2 = $date1->new_config();
creates a new Date::Manip::Date object with a new Date::Manip::TZ
(and Date::Manip::Base) object. Initially, it is the same
configuration as the original object.
If the object is a Date::Manip::Base object, the following are
equivalent:
$base2 = $base1->new_config();
$base2 = $base1->new();
Both $string and "\@opts" are optional. They are used in the same
way they are used in the new method.
new_date
new_delta
new_recur
These are shortcuts for specifying the class. The following sets of
calls are all equivalent:
$date = $obj->new_date();
$date = new Date::Manip::Date($obj);
$delta = $obj->new_delta();
$delta = new Date::Manip::Date($obj);
These methods all allow optional "($string,\@opts)" arguments.
OTHER METHODS
base
tz
$base = $obj->base();
This returns the Date::Manip::Base object associated with the given
object.
If $obj is a Date::Manip::Base object, nothing is returned (i.e. it
doesn't create a new copy of the object).
$tz = $obj->tz();
This returns the Date::Manip::TZ object associated with the given
object. If $obj is a Date::Manip::TZ or Date::Manip::Base object,
nothing is returned.
config
$obj->config($var1,$val1,$var2,$val2,...);
This will set the value of any configuration variables. Please
refer to the Date::Manip::Config manual for a list of all
configuration variables and their description.
get_config
@var = $obj->get_config();
$val = $obj->get_config($var1);
@val = $obj->get_config($var1,$var2,...);
This queries the current config values. With no argument, it will
return the list of config variables (all lowercase).
With one or more arguments, it returns the current values for the
config variables passed in (case insensitive).
err
$err = $obj->err();
This will return the full error message if the previous operation
failed for any reason.
$obj->err(1);
will clear the error code.
is_date
is_delta
is_recur
$flag = $obj->is_date();
Returns 0 or 1, depending on the object. For example, a
Date::Manip::Date object returns 1 with the is_date method, and 0
for the other two.
version
$vers = $obj->version($flag);
This returns the version of Date::Manip.
If $flag is passed in, and $obj is not a Date::Manip::Base object,
the version and timezone information will be passed back.
KNOWN BUGS
None known.
BUGS AND QUESTIONS
Please refer to the Date::Manip::Problems documentation for information
on submitting bug reports or questions to the author.
SEE ALSO
Date::Manip - main module documentation
LICENSE
This script is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
AUTHOR
Sullivan Beck (sbeck@cpan.org)
perl v5.36.0 2023-03-05 Date::Manip::Obj(3pm)
Generated by dwww version 1.15 on Wed Jun 26 05:23:57 CEST 2024.