VIRSH(1) Virtualization Support VIRSH(1)
NAME
virsh - management user interface
SYNOPSIS
virsh [OPTION]... [COMMAND_STRING]
virsh [OPTION]... COMMAND [ARG]...
DESCRIPTION
The virsh program is the main interface for managing virsh guest do-
mains. The program can be used to create, pause, and shutdown domains.
It can also be used to list current domains. Libvirt is a C toolkit to
interact with the virtualization capabilities of recent versions of
Linux (and other OSes). It is free software available under the GNU
Lesser General Public License. Virtualization of the Linux Operating
System means the ability to run multiple instances of Operating Systems
concurrently on a single hardware system where the basic resources are
driven by a Linux instance. The library aims at providing a long term
stable C API. It currently supports Xen, QEMU, KVM, LXC, OpenVZ, Vir-
tualBox and VMware ESX.
The basic structure of most virsh usage is:
virsh [OPTION]... <command> <domain> [ARG]...
Where command is one of the commands listed below; domain is the nu-
meric domain id, or the domain name, or the domain UUID; and ARGS are
command specific options. There are a few exceptions to this rule in
the cases where the command in question acts on all domains, the entire
machine, or directly on the xen hypervisor. Those exceptions will be
clear for each of those commands. Note: it is permissible to give nu-
meric names to domains, however, doing so will result in a domain that
can only be identified by domain id. In other words, if a numeric value
is supplied it will be interpreted as a domain id, not as a name. Any
command starting with # is treated as a comment and silently ignored,
all other unrecognized commands are diagnosed.
The virsh program can be used either to run one COMMAND by giving the
command and its arguments on the shell command line, or a COM-
MAND_STRING which is a single shell argument consisting of multiple
COMMAND actions and their arguments joined with whitespace and sepa-
rated by semicolons or newlines between commands, where unquoted back-
slash-newline pairs are elided. Within COMMAND_STRING, virsh under-
stands the same single, double, and backslash escapes as the shell, al-
though you must add another layer of shell escaping in creating the
single shell argument, and any word starting with unquoted # begins a
comment that ends at newline. If no command is given in the command
line, virsh will then start a minimal interpreter waiting for your com-
mands, and the quit command will then exit the program.
The virsh program understands the following OPTIONS.
-c, --connect URI
Connect to the specified URI, as if by the connect command, instead of
the default connection.
-d, --debug LEVEL
Enable debug messages at integer LEVEL and above. LEVEL can range from
0 to 4 (default). See the documentation of VIRSH_DEBUG environment
variable below for the description of each LEVEL.
• -e, --escape string
Set alternative escape sequence for console command. By default, tel-
net's ^] is used. Allowed characters when using hat notation are: al-
phabetic character, @, [, ], , ^, _.
• -h, --help
Ignore all other arguments, and behave as if the help command were
given instead.
• -k, --keepalive-interval INTERVAL
Set an INTERVAL (in seconds) for sending keepalive messages to check
whether connection to the server is still alive. Setting the interval
to 0 disables client keepalive mechanism.
• -K, --keepalive-count COUNT
Set a number of times keepalive message can be sent without getting an
answer from the server without marking the connection dead. There is
no effect to this setting in case the INTERVAL is set to 0.
• -l, --log FILE
Output logging details to FILE.
• -q, --quiet
Avoid extra informational messages.
• -r, --readonly
Make the initial connection read-only, as if by the --readonly option
of the connect command.
• -t, --timing
Output elapsed time information for each command.
• -v, --version[=short]
Ignore all other arguments, and prints the version of the libvirt li-
brary virsh is coming from
• -V, --version=long
Ignore all other arguments, and prints the version of the libvirt li-
brary virsh is coming from and which options and driver are compiled
in.
NOTES
Most virsh operations rely upon the libvirt library being able to con-
nect to an already running libvirtd service. This can usually be done
using the command service libvirtd start.
Most virsh commands require root privileges to run due to the communi-
cations channels used to talk to the hypervisor. Running as non root
will return an error.
Most virsh commands act synchronously, except maybe shutdown, setvcpus
and setmem. In those cases the fact that the virsh program returned,
may not mean the action is complete and you must poll periodically to
detect that the guest completed the operation.
virsh strives for backward compatibility. Although the help command
only lists the preferred usage of a command, if an older version of
virsh supported an alternate spelling of a command or option (such as
--tunnelled instead of --tunneled), then scripts using that older
spelling will continue to work.
Several virsh commands take an optionally scaled integer; if no scale
is provided, then the default is listed in the command (for historical
reasons, some commands default to bytes, while other commands default
to kibibytes). The following case-insensitive suffixes can be used to
select a specific scale:
b, byte byte 1
KB kilobyte 1,000
k, KiB kibibyte 1,024
MB megabyte 1,000,000
M, MiB mebibyte 1,048,576
GB gigabyte 1,000,000,000
G, GiB gibibyte 1,073,741,824
TB terabyte 1,000,000,000,000
T, TiB tebibyte 1,099,511,627,776
PB petabyte 1,000,000,000,000,000
P, PiB pebibyte 1,125,899,906,842,624
EB exabyte 1,000,000,000,000,000,000
E, EiB exbibyte 1,152,921,504,606,846,976
GENERIC COMMANDS
The following commands are generic i.e. not specific to a domain.
help
Syntax:
help [command-or-group]
This lists each of the virsh commands. When used without options, all
commands are listed, one per line, grouped into related categories,
displaying the keyword for each group.
To display only commands for a specific group, give the keyword for
that group as an option. For example:
Example 1:
virsh # help host
Host and Hypervisor (help keyword 'host'):
capabilities capabilities
cpu-models show the CPU models for an architecture
connect (re)connect to hypervisor
freecell NUMA free memory
hostname print the hypervisor hostname
qemu-attach Attach to existing QEMU process
qemu-monitor-command QEMU Monitor Command
qemu-agent-command QEMU Guest Agent Command
sysinfo print the hypervisor sysinfo
uri print the hypervisor canonical URI
To display detailed information for a specific command, give its name
as the option instead. For example:
Example 2:
virsh # help list
NAME
list - list domains
SYNOPSIS
list [--inactive] [--all]
DESCRIPTION
Returns list of domains.
OPTIONS
--inactive list inactive domains
--all list inactive & active domains
quit, exit
Syntax:
quit
exit
quit this interactive terminal
version
Syntax:
version [--daemon]
Will print out the major version info about what this built from. If
--daemon is specified then the version of the libvirt daemon is in-
cluded in the output.
Example:
$ virsh version
Compiled against library: libvirt 1.2.3
Using library: libvirt 1.2.3
Using API: QEMU 1.2.3
Running hypervisor: QEMU 2.0.50
$ virsh version --daemon
Compiled against library: libvirt 1.2.3
Using library: libvirt 1.2.3
Using API: QEMU 1.2.3
Running hypervisor: QEMU 2.0.50
Running against daemon: 1.2.6
cd
Syntax:
cd [directory]
Will change current directory to directory. The default directory for
the cd command is the home directory or, if there is no HOME variable
in the environment, the root directory.
This command is only available in interactive mode.
pwd
Syntax:
pwd
Will print the current directory.
connect
Syntax:
connect [URI] [--readonly]
(Re)-Connect to the hypervisor. When the shell is first started, this
is automatically run with the URI parameter requested by the -c option
on the command line. The URI parameter specifies how to connect to the
hypervisor. The URI docs https://libvirt.org/uri.html list the values
supported, but the most common are:
• xen:///system
this is used to connect to the local Xen hypervisor
• qemu:///system
connect locally as root to the daemon supervising QEMU and KVM do-
mains
• qemu:///session
connect locally as a normal user to his own set of QEMU and KVM do-
mains
• lxc:///system
connect to a local linux container
To find the currently used URI, check the uri command documented below.
For remote access see the URI docs https://libvirt.org/uri.html on how
to make URIs. The --readonly option allows for read-only connection
uri
Syntax:
uri
Prints the hypervisor canonical URI, can be useful in shell mode.
hostname
Syntax:
hostname
Print the hypervisor hostname.
sysinfo
Syntax:
sysinfo
Print the XML representation of the hypervisor sysinfo, if available.
nodeinfo
Syntax:
nodeinfo
Returns basic information about the node, like number and type of CPU,
and size of the physical memory. The output corresponds to virNodeInfo
structure. Specifically, the "CPU socket(s)" field means number of CPU
sockets per NUMA cell. The information libvirt displays is dependent
upon what each architecture may provide.
nodecpumap
Syntax:
nodecpumap [--pretty]
Displays the node's total number of CPUs, the number of online CPUs and
the list of online CPUs.
With --pretty the online CPUs are printed as a range instead of a list.
nodecpustats
Syntax:
nodecpustats [cpu] [--percent]
Returns cpu stats of the node. If cpu is specified, this will print
the specified cpu statistics only. If --percent is specified, this
will print the percentage of each kind of cpu statistics during 1 sec-
ond.
nodememstats
Syntax:
nodememstats [cell]
Returns memory stats of the node. If cell is specified, this will
print the specified cell statistics only.
nodesevinfo
Syntax:
nodesevinfo
Reports information about the AMD SEV launch security features for the
node, if any. Some of this information is also reported in the domain
capabilities XML document.
nodesuspend
Syntax:
nodesuspend [target] [duration]
Puts the node (host machine) into a system-wide sleep state and sched-
ule the node's Real-Time-Clock interrupt to resume the node after the
time duration specified by duration is out. target specifies the state
to which the host will be suspended to, it can be "mem" (suspend to
RAM), "disk" (suspend to disk), or "hybrid" (suspend to both RAM and
disk). duration specifies the time duration in seconds for which the
host has to be suspended, it should be at least 60 seconds.
node-memory-tune
Syntax:
node-memory-tune [shm-pages-to-scan] [shm-sleep-millisecs] [shm-merge-across-nodes]
Allows you to display or set the node memory parameters.
shm-pages-to-scan can be used to set the number of pages to scan before
the shared memory service goes to sleep; shm-sleep-millisecs can be
used to set the number of millisecs the shared memory service should
sleep before next scan; shm-merge-across-nodes specifies if pages from
different numa nodes can be merged. When set to 0, only pages which
physically reside in the memory area of same NUMA node can be merged.
When set to 1, pages from all nodes can be merged. Default to 1.
Note: Currently the "shared memory service" only means KSM (Kernel
Samepage Merging).
capabilities
Syntax:
capabilities
Print an XML document describing the capabilities of the hypervisor we
are currently connected to. This includes a section on the host capa-
bilities in terms of CPU and features, and a set of description for
each kind of guest which can be virtualized. For a more complete de-
scription see:
https://libvirt.org/formatcaps.html
The XML also show the NUMA topology information if available.
domcapabilities
Syntax:
domcapabilities [virttype] [emulatorbin] [arch] [machine]
Print an XML document describing the domain capabilities for the hyper-
visor we are connected to using information either sourced from an ex-
isting domain or taken from the virsh capabilities output. This may be
useful if you intend to create a new domain and are curious if for in-
stance it could make use of VFIO by creating a domain for the hypervi-
sor with a specific emulator and architecture.
Each hypervisor will have different requirements regarding which op-
tions are required and which are optional. A hypervisor can support
providing a default value for any of the options.
The virttype option specifies the virtualization type used. The value
to be used is either from the 'type' attribute of the <domain/> top
level element from the domain XML or the 'type' attribute found within
each <guest/> element from the virsh capabilities output. The emula-
torbin option specifies the path to the emulator. The value to be used
is either the <emulator> element in the domain XML or the virsh capa-
bilities output. The arch option specifies the architecture to be used
for the domain. The value to be used is either the "arch" attribute
from the domain's XML <os/> element and <type/> subelement or the
"name" attribute of an <arch/> element from the virsh capabililites
output. The machine specifies the machine type for the emulator. The
value to be used is either the "machine" attribute from the domain's
XML <os/> element and <type/> subelement or one from a list of machines
from the virsh capabilities output for a specific architecture and do-
main type.
For the QEMU hypervisor, a virttype of either 'qemu' or 'kvm' must be
supplied along with either the emulatorbin or arch in order to generate
output for the default machine. Supplying a machine value will gener-
ate output for the specific machine.
pool-capabilities
Syntax:
pool-capabilities
Print an XML document describing the storage pool capabilities for the
connected storage driver. This may be useful if you intend to create a
new storage pool and need to know the available pool types and sup-
ported storage pool source and target volume formats as well as the re-
quired source elements to create the pool.
inject-nmi
Syntax:
inject-nmi domain
Inject NMI to the guest.
list
Syntax:
list [--inactive | --all]
[--managed-save] [--title]
{ [--table] | --name | --uuid | --id }
[--persistent] [--transient]
[--with-managed-save] [--without-managed-save]
[--autostart] [--no-autostart]
[--with-snapshot] [--without-snapshot]
[--with-checkpoint] [--without-checkpoint]
[--state-running] [--state-paused]
[--state-shutoff] [--state-other]
Prints information about existing domains. If no options are specified
it prints out information about running domains.
Example 1:
An example format for the list is as follows:
``virsh`` list
Id Name State
----------------------------------------------------
0 Domain-0 running
2 fedora paused
Name is the name of the domain. ID the domain numeric id. State is
the run state (see below).
STATES
The State field lists what state each domain is currently in. A domain
can be in one of the following possible states:
• running
The domain is currently running on a CPU
• idle
The domain is idle, and not running or runnable. This can be caused
because the domain is waiting on IO (a traditional wait state) or has
gone to sleep because there was nothing else for it to do.
• paused
The domain has been paused, usually occurring through the administra-
tor running virsh suspend. When in a paused state the domain will
still consume allocated resources like memory, but will not be eligi-
ble for scheduling by the hypervisor.
• in shutdown
The domain is in the process of shutting down, i.e. the guest operat-
ing system has been notified and should be in the process of stopping
its operations gracefully.
• shut off
The domain is not running. Usually this indicates the domain has
been shut down completely, or has not been started.
• crashed
The domain has crashed, which is always a violent ending. Usually
this state can only occur if the domain has been configured not to
restart on crash.
• pmsuspended
The domain has been suspended by guest power management, e.g. entered
into s3 state.
Normally only active domains are listed. To list inactive domains spec-
ify --inactive or --all to list both active and inactive domains.
Filtering
To further filter the list of domains you may specify one or more of
filtering flags supported by the list command. These flags are grouped
by function. Specifying one or more flags from a group enables the
filter group. Note that some combinations of flags may yield no re-
sults. Supported filtering flags and groups:
Persistence
Flag --persistent is used to include persistent guests in the returned
list. To include transient guests specify --transient.
Existence of managed save image
To list domains having a managed save image specify flag --with-man-
aged-save. For domains that don't have a managed save image specify
--without-managed-save.
Domain state
The following filter flags select a domain by its state: --state-run-
ning for running domains, --state-paused for paused domains,
--state-shutoff for turned off domains and --state-other for all other
states as a fallback.
Autostarting domains
To list autostarting domains use the flag --autostart. To list domains
with this feature disabled use --no-autostart.
Snapshot existence
Domains that have snapshot images can be listed using flag --with-snap-
shot, domains without a snapshot --without-snapshot.
Checkpoint existence
Domains that have checkpoints can be listed using flag --with-check-
point, domains without a checkpoint --without-checkpoint.
When talking to older servers, this command is forced to use a series
of API calls with an inherent race, where a domain might not be listed
or might appear more than once if it changed state between calls while
the list was being collected. Newer servers do not have this problem.
If --managed-save is specified, then domains that have managed save
state (only possible if they are in the shut off state, so you need to
specify --inactive or --all to actually list them) will instead show as
saved in the listing. This flag is usable only with the default --table
output. Note that this flag does not filter the list of domains.
If --name is specified, domain names are printed instead of the table
formatted one per line. If --uuid is specified domain's UUID's are
printed instead of names. If --id is specified then domain's ID's are
printed indead of names. However, it is possible to combine --name,
--uuid and --id to select only desired fields for printing. Flag --ta-
ble specifies that the legacy table-formatted output should be used,
but it is mutually exclusive with --name, --uuid and --id. This is the
default and will be used if neither of --name, --uuid or --id is speci-
fied. If neither --name nor --uuid is specified, but --id is, then only
active domains are listed, even with the --all parameter as otherwise
the output would just contain bunch of lines with just -1.
If --title is specified, then the short domain description (title) is
printed in an extra column. This flag is usable only with the default
--table output.
Example 2:
$ virsh list --title
Id Name State Title
-------------------------------------------
0 Domain-0 running Mailserver 1
2 fedora paused
freecell
Syntax:
freecell [{ [--cellno] cellno | --all }]
Prints the available amount of memory on the machine or within a NUMA
cell. The freecell command can provide one of three different displays
of available memory on the machine depending on the options specified.
With no options, it displays the total free memory on the machine.
With the --all option, it displays the free memory in each cell and the
total free memory on the machine. Finally, with a numeric argument or
with --cellno plus a cell number it will display the free memory for
the specified cell only.
freepages
Syntax:
freepages [{ [--cellno] cellno [--pagesize] pagesize | --all }]
Prints the available amount of pages within a NUMA cell. cellno refers
to the NUMA cell you're interested in. pagesize is a scaled integer
(see NOTES above). Alternatively, if --all is used, info on each pos-
sible combination of NUMA cell and page size is printed out.
allocpages
Syntax:
allocpages [--pagesize] pagesize [--pagecount] pagecount [[--cellno] cellno] [--add] [--all]
Change the size of pages pool of pagesize on the host. If --add is
specified, then pagecount pages are added into the pool. However, if
--add wasn't specified, then the pagecount is taken as the new absolute
size of the pool (this may be used to free some pages and size the pool
down). The cellno modifier can be used to narrow the modification down
to a single host NUMA cell. On the other end of spectrum lies --all
which executes the modification on all NUMA cells.
cpu-baseline
Syntax:
cpu-baseline FILE [--features] [--migratable]
Compute baseline CPU which will be supported by all host CPUs given in
<file>. (See hypervisor-cpu-baseline command to get a CPU which can be
provided by a specific hypervisor.) The list of host CPUs is built by
extracting all <cpu> elements from the <file>. Thus, the <file> can
contain either a set of <cpu> elements separated by new lines or even a
set of complete <capabilities> elements printed by capabilities com-
mand. If --features is specified, then the resulting XML description
will explicitly include all features that make up the CPU, without this
option features that are part of the CPU model will not be listed in
the XML description. If --migratable is specified, features that
block migration will not be included in the resulting CPU.
cpu-compare
Syntax:
cpu-compare FILE [--error] [--validate]
Compare CPU definition from XML <file> with host CPU. (See hypervi-
sor-cpu-compare command for comparing the CPU definition with the CPU
which a specific hypervisor is able to provide on the host.) The XML
<file> may contain either host or guest CPU definition. The host CPU
definition is the <cpu> element and its contents as printed by capabil-
ities command. The guest CPU definition is the <cpu> element and its
contents from domain XML definition or the CPU definition created from
the host CPU model found in domain capabilities XML (printed by domca-
pabilities command). In addition to the <cpu> element itself, this com-
mand accepts full domain XML, capabilities XML, or domain capabilities
XML containing the CPU definition. For more information on guest CPU
definition see: https://libvirt.org/formatdomain.html#elementsCPU. If
--error is specified, the command will return an error when the given
CPU is incompatible with host CPU and a message providing more details
about the incompatibility will be printed out. If --validate is speci-
fied, validates the format of the XML document against an internal RNG
schema.
cpu-models
Syntax:
cpu-models arch
Print the list of CPU models known by libvirt for the specified archi-
tecture. Whether a specific hypervisor is able to create a domain
which uses any of the printed CPU models is a separate question which
can be answered by looking at the domain capabilities XML returned by
domcapabilities command. Moreover, for some architectures libvirt does
not know any CPU models and the usable CPU models are only limited by
the hypervisor. This command will print that all CPU models are ac-
cepted for these architectures and the actual list of supported CPU
models can be checked in the domain capabilities XML.
hypervisor-cpu-compare
Syntax:
hypervisor-cpu-compare FILE [virttype] [emulator] [arch] [machine] [--error] [--validate]
Compare CPU definition from XML <file> with the CPU the hypervisor is
able to provide on the host. (This is different from cpu-compare which
compares the CPU definition with the host CPU without considering any
specific hypervisor and its abilities.)
The XML FILE may contain either a host or guest CPU definition. The
host CPU definition is the <cpu> element and its contents as printed by
the capabilities command. The guest CPU definition is the <cpu> element
and its contents from the domain XML definition or the CPU definition
created from the host CPU model found in the domain capabilities XML
(printed by the domcapabilities command). In addition to the <cpu> ele-
ment itself, this command accepts full domain XML, capabilities XML, or
domain capabilities XML containing the CPU definition. For more infor-
mation on guest CPU definition see:
https://libvirt.org/formatdomain.html#elementsCPU.
The virttype option specifies the virtualization type (usable in the
'type' attribute of the <domain> top level element from the domain
XML). emulator specifies the path to the emulator, arch specifies the
CPU architecture, and machine specifies the machine type. If --error is
specified, the command will return an error when the given CPU is in-
compatible with the host CPU and a message providing more details about
the incompatibility will be printed out. If --validate is specified,
validates the format of the XML document against an internal RNG
schema.
hypervisor-cpu-baseline
Syntax:
hypervisor-cpu-baseline [FILE] [virttype] [emulator] [arch] [machine]
[--features] [--migratable] [model]
Compute a baseline CPU which will be compatible with all CPUs defined
in an XML file and with the CPU the hypervisor is able to provide on
the host. (This is different from cpu-baseline which does not consider
any hypervisor abilities when computing the baseline CPU.)
As an alternative for FILE in case the XML would only contain a CPU
model with no additional features the CPU model name itself can be
passed as model. Exactly one of FILE and model must be used.
The XML FILE may contain either host or guest CPU definitions describ-
ing the host CPU model. The host CPU definition is the <cpu> element
and its contents as printed by capabilities command. The guest CPU def-
inition may be created from the host CPU model found in domain capabil-
ities XML (printed by domcapabilities command). In addition to the
<cpu> elements, this command accepts full capabilities XMLs, or domain
capabilities XMLs containing the CPU definitions. It is recommended to
use only the CPU definitions from domain capabilities, as on some ar-
chitectures using the host CPU definition may either fail or provide
unexpected results.
When FILE contains only a single CPU definition, the command will print
the same CPU with restrictions imposed by the capabilities of the hy-
pervisor. Specifically, running the virsh hypervisor-cpu-baseline com-
mand with no additional options on the result of virsh domcapabilities
will transform the host CPU model from domain capabilities XML to a
form directly usable in domain XML. Running the command with model (or
FILE containing just a single CPU definition with model and no feature
elements) which is marked as unusable in virsh domcapabilities will
provide a list of features that block this CPU model from being usable.
The virttype option specifies the virtualization type (usable in the
'type' attribute of the <domain> top level element from the domain
XML). emulator specifies the path to the emulator, arch specifies the
CPU architecture, and machine specifies the machine type. If --features
is specified, then the resulting XML description will explicitly in-
clude all features that make up the CPU, without this option features
that are part of the CPU model will not be listed in the XML descrip-
tion. If --migratable is specified, features that block migration will
not be included in the resulting CPU.
DOMAIN COMMANDS
The following commands manipulate domains directly, as stated previ-
ously most commands take domain as the first parameter. The domain can
be specified as a short integer, a name or a full UUID.
autostart
Syntax:
autostart [--disable] domain
Configure a domain to be automatically started at boot.
The option --disable disables autostarting.
blkdeviotune
Syntax:
blkdeviotune domain device [[--config] [--live] | [--current]]
[[total-bytes-sec] | [read-bytes-sec] [write-bytes-sec]]
[[total-iops-sec] | [read-iops-sec] [write-iops-sec]]
[[total-bytes-sec-max] | [read-bytes-sec-max] [write-bytes-sec-max]]
[[total-iops-sec-max] | [read-iops-sec-max] [write-iops-sec-max]]
[[total-bytes-sec-max-length] |
[read-bytes-sec-max-length] [write-bytes-sec-max-length]]
[[total-iops-sec-max-length] |
[read-iops-sec-max-length] [write-iops-sec-max-length]]
[size-iops-sec] [group-name]
Set or query the block disk io parameters for a block device of domain.
device specifies a unique target name (<target dev='name'/>) or source
file (<source file='name'/>) for one of the disk devices attached to
domain (see also domblklist for listing these names).
If no limit is specified, it will query current I/O limits setting.
Otherwise, alter the limits with these flags: --total-bytes-sec speci-
fies total throughput limit as a scaled integer, the default being
bytes per second if no suffix is specified. --read-bytes-sec specifies
read throughput limit as a scaled integer, the default being bytes per
second if no suffix is specified. --write-bytes-sec specifies write
throughput limit as a scaled integer, the default being bytes per sec-
ond if no suffix is specified. --total-iops-sec specifies total I/O
operations limit per second. --read-iops-sec specifies read I/O opera-
tions limit per second. --write-iops-sec specifies write I/O opera-
tions limit per second. --total-bytes-sec-max specifies maximum total
throughput limit as a scaled integer, the default being bytes per sec-
ond if no suffix is specified --read-bytes-sec-max specifies maximum
read throughput limit as a scaled integer, the default being bytes per
second if no suffix is specified. --write-bytes-sec-max specifies max-
imum write throughput limit as a scaled integer, the default being
bytes per second if no suffix is specified. --total-iops-sec-max spec-
ifies maximum total I/O operations limit per second.
--read-iops-sec-max specifies maximum read I/O operations limit per
second. --write-iops-sec-max specifies maximum write I/O operations
limit per second. --total-bytes-sec-max-length specifies duration in
seconds to allow maximum total throughput limit.
--read-bytes-sec-max-length specifies duration in seconds to allow max-
imum read throughput limit. --write-bytes-sec-max-length specifies du-
ration in seconds to allow maximum write throughput limit. --to-
tal-iops-sec-max-length specifies duration in seconds to allow maximum
total I/O operations limit. --read-iops-sec-max-length specifies dura-
tion in seconds to allow maximum read I/O operations limit.
--write-iops-sec-max-length specifies duration in seconds to allow max-
imum write I/O operations limit. --size-iops-sec specifies size I/O
operations limit per second. --group-name specifies group name to
share I/O quota between multiple drives. For a QEMU domain, if no name
is provided, then the default is to have a single group for each de-
vice.
Older versions of virsh only accepted these options with underscore in-
stead of dash, as in --total_bytes_sec.
Bytes and iops values are independent, but setting only one value (such
as --read-bytes-sec) resets the other two in that category to unlim-
ited. An explicit 0 also clears any limit. A non-zero value for a
given total cannot be mixed with non-zero values for read or write.
It is up to the hypervisor to determine how to handle the length val-
ues. For the QEMU hypervisor, if an I/O limit value or maximum value
is set, then the default value of 1 second will be displayed. Supplying
a 0 will reset the value back to the default.
If --live is specified, affect a running guest. If --config is speci-
fied, affect the next start of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. When setting the disk io parameters
both --live and --config flags may be given, but --current is exclu-
sive. For querying only one of --live, --config or --current can be
specified. If no flag is specified, behavior is different depending on
hypervisor.
blkiotune
Syntax:
blkiotune domain [--weight weight] [--device-weights device-weights]
[--device-read-iops-sec device-read-iops-sec]
[--device-write-iops-sec device-write-iops-sec]
[--device-read-bytes-sec device-read-bytes-sec]
[--device-write-bytes-sec device-write-bytes-sec]
[[--config] [--live] | [--current]]
Display or set the blkio parameters. QEMU/KVM supports --weight.
--weight is in range [100, 1000]. After kernel 2.6.39, the value could
be in the range [10, 1000].
device-weights is a single string listing one or more device/weight
pairs, in the format of /path/to/device,weight,/path/to/device,weight.
Each weight is in the range [100, 1000], [10, 1000] after kernel
2.6.39, or the value 0 to remove that device from per-device listings.
Only the devices listed in the string are modified; any existing
per-device weights for other devices remain unchanged.
device-read-iops-sec is a single string listing one or more de-
vice/read_iops_sec pairs, int the format of /path/to/de-
vice,read_iops_sec,/path/to/device,read_iops_sec. Each read_iops_sec
is a number which type is unsigned int, value 0 to remove that device
from per-device listing. Only the devices listed in the string are
modified; any existing per-device read_iops_sec for other devices re-
main unchanged.
device-write-iops-sec is a single string listing one or more de-
vice/write_iops_sec pairs, int the format of /path/to/de-
vice,write_iops_sec,/path/to/device,write_iops_sec. Each
write_iops_sec is a number which type is unsigned int, value 0 to re-
move that device from per-device listing. Only the devices listed in
the string are modified; any existing per-device write_iops_sec for
other devices remain unchanged.
device-read-bytes-sec is a single string listing one or more de-
vice/read_bytes_sec pairs, int the format of /path/to/de-
vice,read_bytes_sec,/path/to/device,read_bytes_sec. Each
read_bytes_sec is a number which type is unsigned long long, value 0 to
remove that device from per-device listing. Only the devices listed in
the string are modified; any existing per-device read_bytes_sec for
other devices remain unchanged.
device-write-bytes-sec is a single string listing one or more de-
vice/write_bytes_sec pairs, int the format of /path/to/de-
vice,write_bytes_sec,/path/to/device,write_bytes_sec. Each
write_bytes_sec is a number which type is unsigned long long, value 0
to remove that device from per-device listing. Only the devices listed
in the string are modified; any existing per-device write_bytes_sec for
other devices remain unchanged.
If --live is specified, affect a running guest. If --config is speci-
fied, affect the next start of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. If no flag is specified, behavior is
different depending on hypervisor.
blockcommit
Syntax:
blockcommit domain path [bandwidth] [--bytes] [base]
[--shallow] [top] [--delete] [--keep-relative]
[--wait [--async] [--verbose]] [--timeout seconds]
[--active] [{--pivot | --keep-overlay}]
Reduce the length of a backing image chain, by committing changes at
the top of the chain (snapshot or delta files) into backing images. By
default, this command attempts to flatten the entire chain. If base
and/or top are specified as files within the backing chain, then the
operation is constrained to committing just that portion of the chain;
--shallow can be used instead of base to specify the immediate backing
file of the resulting top image to be committed. The files being com-
mitted are rendered invalid, possibly as soon as the operation starts;
using the --delete flag will attempt to remove these invalidated files
at the successful completion of the commit operation. When the
--keep-relative flag is used, the backing file paths will be kept rela-
tive.
When top is omitted or specified as the active image, it is also possi-
ble to specify --active to trigger a two-phase active commit. In the
first phase, top is copied into base and the job can only be canceled,
with top still containing data not yet in base. In the second phase,
top and base remain identical until a call to blockjob with the --abort
flag (keeping top as the active image that tracks changes from that
point in time) or the --pivot flag (making base the new active image
and invalidating top).
By default, this command returns as soon as possible, and data for the
entire disk is committed in the background; the progress of the opera-
tion can be checked with blockjob. However, if --wait is specified,
then this command will block until the operation completes (or for
--active, enters the second phase), or until the operation is canceled
because the optional timeout in seconds elapses or SIGINT is sent (usu-
ally with Ctrl-C). Using --verbose along with --wait will produce pe-
riodic status updates. If job cancellation is triggered, --async will
return control to the user as fast as possible, otherwise the command
may continue to block a little while longer until the job is done
cleaning up. Using --pivot is shorthand for combining --active --wait
with an automatic blockjob --pivot; and using --keep-overlay is short-
hand for combining --active --wait with an automatic blockjob --abort.
path specifies fully-qualified path of the disk; it corresponds to a
unique target name (<target dev='name'/>) or source file (<source
file='name'/>) for one of the disk devices attached to domain (see also
domblklist for listing these names). bandwidth specifies copying band-
width limit in MiB/s, although for QEMU, it may be non-zero only for an
online domain. For further information on the bandwidth argument see
the corresponding section for the blockjob command.
blockcopy
Syntax:
blockcopy domain path { dest [format] [--blockdev] | --xml file }
[--shallow] [--reuse-external] [bandwidth]
[--wait [--async] [--verbose]] [{--pivot | --finish}]
[--timeout seconds] [granularity] [buf-size] [--bytes]
[--transient-job] [--synchronous-writes] [--print-xml]
Copy a disk backing image chain to a destination. Either dest as the
destination file name, or --xml with the name of an XML file containing
a top-level <disk> element describing the destination, must be present.
Additionally, if dest is given, format should be specified to declare
the format of the destination (if format is omitted, then libvirt will
reuse the format of the source, or with --reuse-external will be forced
to probe the destination format, which could be a potential security
hole). The command supports --raw as a boolean flag synonym for --for-
mat=raw. When using dest, the destination is treated as a regular file
unless --blockdev is used to signal that it is a block device. By de-
fault, this command flattens the entire chain; but if --shallow is
specified, the copy shares the backing chain.
If --reuse-external is specified, then the destination must exist and
have sufficient space to hold the copy. If --shallow is used in con-
junction with --reuse-external then the pre-created image must have
guest visible contents identical to guest visible contents of the back-
ing file of the original image. This may be used to modify the backing
file names on the destination.
By default, the copy job runs in the background, and consists of two
phases. Initially, the job must copy all data from the source, and
during this phase, the job can only be canceled to revert back to the
source disk, with no guarantees about the destination. After this
phase completes, both the source and the destination remain mirrored
until a call to blockjob with the --abort and --pivot flags pivots over
to the copy, or a call without --pivot leaves the destination as a
faithful copy of that point in time. However, if --wait is specified,
then this command will block until the mirroring phase begins, or can-
cel the operation if the optional timeout in seconds elapses or SIGINT
is sent (usually with Ctrl-C). Using --verbose along with --wait will
produce periodic status updates. Using --pivot (similar to blockjob
--pivot) or --finish (similar to blockjob --abort) implies --wait, and
will additionally end the job cleanly rather than leaving things in the
mirroring phase. If job cancellation is triggered by timeout or by
--finish, --async will return control to the user as fast as possible,
otherwise the command may continue to block a little while longer until
the job has actually cancelled.
path specifies fully-qualified path of the disk. bandwidth specifies
copying bandwidth limit in MiB/s. Specifying a negative value is inter-
preted as an unsigned long long value that might be essentially unlim-
ited, but more likely would overflow; it is safer to use 0 for that
purpose. For further information on the bandwidth argument see the cor-
responding section for the blockjob command. Specifying granularity
allows fine-tuning of the granularity that will be copied when a dirty
region is detected; larger values trigger less I/O overhead but may end
up copying more data overall (the default value is usually correct);
hypervisors may restrict this to be a power of two or fall within a
certain range. Specifying buf-size will control how much data can be
simultaneously in-flight during the copy; larger values use more memory
but may allow faster completion (the default value is usually correct).
--transient-job allows specifying that the user does not require the
job to be recovered if the VM crashes or is turned off before the job
completes. This flag removes the restriction of copy jobs to transient
domains if that restriction is applied by the hypervisor.
If --synchronous-writes is specified the block job will wait for guest
writes to be propagated both to the original image and to the destina-
tion of the copy so that it's guaranteed that the job converges if the
destination storage is slower. This may impact performance of writes
while the blockjob is running.
If --print-xml is specified, then the XML used to start the block copy
job is printed instead of starting the job.
blockjob
Syntax:
blockjob domain path { [--abort] [--async] [--pivot] |
[--info] [--raw] [--bytes] | [bandwidth] }
Manage active block operations. There are three mutually-exclusive
modes: --info, bandwidth, and --abort. --async and --pivot imply abort
mode; --raw implies info mode; and if no mode was given, --info mode is
assumed.
path specifies fully-qualified path of the disk; it corresponds to a
unique target name (<target dev='name'/>) or source file (<source
file='name'/>) for one of the disk devices attached to domain (see also
domblklist for listing these names).
In --abort mode, the active job on the specified disk will be aborted.
If --async is also specified, this command will return immediately,
rather than waiting for the cancellation to complete. If --pivot is
specified, this requests that an active copy or active commit job be
pivoted over to the new image.
In --info mode, the active job information on the specified disk will
be printed. By default, the output is a single human-readable summary
line; this format may change in future versions. Adding --raw lists
each field of the struct, in a stable format. If the --bytes flag is
set, then the command errors out if the server could not supply bytes/s
resolution; when omitting the flag, raw output is listed in MiB/s and
human-readable output automatically selects the best resolution sup-
ported by the server.
bandwidth can be used to set bandwidth limit for the active job in
MiB/s. If --bytes is specified then the bandwidth value is interpreted
in bytes/s. Specifying a negative value is interpreted as an unsigned
long value or essentially unlimited. The hypervisor can choose whether
to reject the value or convert it to the maximum value allowed. Option-
ally a scaled positive number may be used as bandwidth (see NOTES
above). Using --bytes with a scaled value permits a finer granularity
to be selected. A scaled value used without --bytes will be rounded
down to MiB/s. Note that the --bytes may be unsupported by the hypervi-
sor.
Note that the progress reported for blockjobs corresponding to a
pull-mode backup don't report progress of the backup but rather usage
of temporary space required for the backup.
blockpull
Syntax:
blockpull domain path [bandwidth] [--bytes] [base]
[--wait [--verbose] [--timeout seconds] [--async]]
[--keep-relative]
Populate a disk from its backing image chain. By default, this command
flattens the entire chain; but if base is specified, containing the
name of one of the backing files in the chain, then that file becomes
the new backing file and only the intermediate portion of the chain is
pulled. Once all requested data from the backing image chain has been
pulled, the disk no longer depends on that portion of the backing
chain.
By default, this command returns as soon as possible, and data for the
entire disk is pulled in the background; the progress of the operation
can be checked with blockjob. However, if --wait is specified, then
this command will block until the operation completes, or cancel the
operation if the optional timeout in seconds elapses or SIGINT is sent
(usually with Ctrl-C). Using --verbose along with --wait will produce
periodic status updates. If job cancellation is triggered, --async
will return control to the user as fast as possible, otherwise the com-
mand may continue to block a little while longer until the job is done
cleaning up.
Using the --keep-relative flag will keep the backing chain names rela-
tive.
path specifies fully-qualified path of the disk; it corresponds to a
unique target name (<target dev='name'/>) or source file (<source
file='name'/>) for one of the disk devices attached to domain (see also
domblklist for listing these names). bandwidth specifies copying band-
width limit in MiB/s. For further information on the bandwidth argument
see the corresponding section for the blockjob command.
blockresize
Syntax:
blockresize domain path size
Resize a block device of domain while the domain is running, path spec-
ifies the absolute path of the block device; it corresponds to a unique
target name (<target dev='name'/>) or source file (<source
file='name'/>) for one of the disk devices attached to domain (see also
domblklist for listing these names).
size is a scaled integer (see NOTES above) which defaults to KiB
(blocks of 1024 bytes) if there is no suffix. You must use a suffix of
"B" to get bytes (note that for historical reasons, this differs from
vol-resize which defaults to bytes without a suffix).
console
Syntax:
console domain [devname] [--safe] [--force]
Connect the virtual serial console for the guest. The optional devname
parameter refers to the device alias of an alternate console, serial or
parallel device configured for the guest. If omitted, the primary con-
sole will be opened.
If the flag --safe is specified, the connection is only attempted if
the driver supports safe console handling. This flag specifies that the
server has to ensure exclusive access to console devices. Optionally
the --force flag may be specified, requesting to disconnect any exist-
ing sessions, such as in a case of a broken connection.
cpu-stats
Syntax:
cpu-stats domain [--total] [start] [count]
Provide cpu statistics information of a domain. The domain should be
running. Default it shows stats for all CPUs, and a total. Use --total
for only the total stats, start for only the per-cpu stats of the CPUs
from start, count for only count CPUs' stats.
create
Syntax:
create FILE [--console] [--paused] [--autodestroy]
[--pass-fds N,M,...] [--validate] [--reset-nvram]
Create a domain from an XML <file>. Optionally, --validate option can
be passed to validate the format of the input XML file against an in-
ternal RNG schema (identical to using virt-xml-validate(1) tool). Do-
mains created using this command are going to be either transient (tem-
porary ones that will vanish once destroyed) or existing persistent
guests that will run with one-time use configuration, leaving the per-
sistent XML untouched (this can come handy during an automated testing
of various configurations all based on the original XML). See the ex-
ample below for usage demonstration.
The domain will be paused if the --paused option is used and supported
by the driver; otherwise it will be running. If --console is requested,
attach to the console after creation. If --autodestroy is requested,
then the guest will be automatically destroyed when virsh closes its
connection to libvirt, or otherwise exits.
If --pass-fds is specified, the argument is a comma separated list of
open file descriptors which should be pass on into the guest. The file
descriptors will be re-numbered in the guest, starting from 3. This is
only supported with container based virtualization.
If --reset-nvram is specified, any existing NVRAM file will be deleted
and re-initialized from its pristine template.
Example:
1. prepare a template from an existing domain (skip directly to 3a if
writing one from scratch)
# virsh dumpxml <domain> > domain.xml
2. edit the template using an editor of your choice and:
a. DO CHANGE! <name> and <uuid> (<uuid> can also be removed), or
b. DON'T CHANGE! either <name> or <uuid>
# $EDITOR domain.xml
3. create a domain from domain.xml, depending on whether following 2a
or 2b respectively:
a. the domain is going to be transient
b. an existing persistent guest will run with a modified one-time
configuration
# virsh create domain.xml
define
Syntax:
define FILE [--validate]
Define a domain from an XML <file>. Optionally, the format of the input
XML file can be validated against an internal RNG schema with --vali-
date (identical to using virt-xml-validate(1) tool). The domain defini-
tion is registered but not started. If domain is already running, the
changes will take effect on the next boot.
desc
Syntax:
desc domain [[--live] [--config] |
[--current]] [--title] [--edit] [--new-desc
New description or title message]
Show or modify description and title of a domain. These values are user
fields that allow storing arbitrary textual data to allow easy identi-
fication of domains. Title should be short, although it's not enforced.
(See also metadata that works with XML based domain metadata.)
Flags --live or --config select whether this command works on live or
persistent definitions of the domain. If both --live and --config are
specified, the --config option takes precedence on getting the current
description and both live configuration and config are updated while
setting the description. --current is exclusive and implied if none of
these was specified.
Flag --edit specifies that an editor with the contents of current de-
scription or title should be opened and the contents saved back after-
wards.
Flag --title selects operation on the title field instead of descrip-
tion.
If neither of --edit and --new-desc are specified the note or descrip-
tion is displayed instead of being modified.
destroy
Syntax:
destroy domain [--graceful] [--remove-logs]
Immediately terminate the domain domain. This doesn't give the domain
OS any chance to react, and it's the equivalent of ripping the power
cord out on a physical machine. In most cases you will want to use the
shutdown command instead. However, this does not delete any storage
volumes used by the guest, and if the domain is persistent, it can be
restarted later.
If domain is transient, then the metadata of any snapshots will be lost
once the guest stops running, but the snapshot contents still exist,
and a new domain with the same name and UUID can restore the snapshot
metadata with snapshot-create. Similarly, the metadata of any check-
points will be lost, but can be restored with checkpoint-create.
If --graceful is specified, don't resort to extreme measures (e.g.
SIGKILL) when the guest doesn't stop after a reasonable timeout; return
an error instead.
If --remove-logs is specified, remove per domain log files. Not all de-
ployment configuration can be supported.
In case of QEMU the flag is only supported if virlogd is used to handle
QEMU process output. Otherwise the flag is ignored.
domblkerror
Syntax:
domblkerror domain
Show errors on block devices. This command usually comes handy when
domstate command says that a domain was paused due to I/O error. The
domblkerror command lists all block devices in error state and the er-
ror seen on each of them.
domblkinfo
Syntax:
domblkinfo domain [block-device --all] [--human]
Get block device size info for a domain. A block-device corresponds to
a unique target name (<target dev='name'/>) or source file (<source
file='name'/>) for one of the disk devices attached to domain (see also
domblklist for listing these names). If --human is set, the output will
have a human readable output. If --all is set, the output will be a
table showing all block devices size info associated with domain. The
--all option takes precedence of the others.
domblklist
Syntax:
domblklist domain [--inactive] [--details]
Print a table showing the brief information of all block devices asso-
ciated with domain. If --inactive is specified, query the block devices
that will be used on the next boot, rather than those currently in use
by a running domain. If --details is specified, disk type and device
value will also be printed. Other contexts that require a block device
name (such as domblkinfo or snapshot-create for disk snapshots) will
accept either target or unique source names printed by this command.
domblkstat
Syntax:
domblkstat domain [block-device] [--human]
Get device block stats for a running domain. A block-device corre-
sponds to a unique target name (<target dev='name'/>) or source file
(<source file='name'/>) for one of the disk devices attached to domain
(see also domblklist for listing these names). On a LXC or QEMU domain,
omitting the block-device yields device block stats summarily for the
entire domain.
Use --human for a more human readable output.
Availability of these fields depends on hypervisor. Unsupported fields
are missing from the output. Other fields may appear if communicating
with a newer version of libvirtd.
Explanation of fields (fields appear in the following order):
• rd_req - count of read operations
• rd_bytes - count of read bytes
• wr_req - count of write operations
• wr_bytes - count of written bytes
• errs - error count
• flush_operations - count of flush operations
• rd_total_times - total time read operations took (ns)
• wr_total_times - total time write operations took (ns)
• flush_total_times - total time flush operations took (ns)
• <-- other fields provided by hypervisor -->
domblkthreshold
Syntax:
domblkthreshold domain dev threshold
Set the threshold value for delivering the block-threshold event. dev
specifies the disk device target or backing chain element of given de-
vice using the 'target[1]' syntax. threshold is a scaled value of the
offset. If the block device should write beyond that offset the event
will be delivered.
domcontrol
Syntax:
domcontrol domain
Returns state of an interface to VMM used to control a domain. For
states other than "ok" or "error" the command also prints number of
seconds elapsed since the control interface entered its current state.
domdirtyrate-calc
Syntax:
domdirtyrate-calc <domain> [--seconds <sec>]
--mode=[page-sampling | dirty-bitmap | dirty-ring]
Calculate an active domain's memory dirty rate which may be expected by
user in order to decide whether it's proper to be migrated out or not.
The seconds parameter can be used to calculate dirty rate in a specific
time which allows 60s at most now and would be default to 1s if miss-
ing. These three page-sampling, dirty-bitmap, dirty-ring modes are mu-
tually exclusive and alternative when specify calculation mode,
page-sampling is the default mode if missing. The calculated dirty rate
information is available by calling 'domstats --dirtyrate'.
domdisplay
Syntax:
domdisplay domain [--include-password] [[--type] type] [--all]
Output a URI which can be used to connect to the graphical display of
the domain via VNC, SPICE or RDP. The particular graphical display
type can be selected using the type parameter (e.g. "vnc", "spice",
"rdp"). If --include-password is specified, the SPICE channel password
will be included in the URI. If --all is specified, then all show all
possible graphical displays, for a VM could have more than one graphi-
cal displays.
domfsfreeze
Syntax:
domfsfreeze domain [[--mountpoint] mountpoint...]
Freeze mounted filesystems within a running domain to prepare for con-
sistent snapshots.
The --mountpoint option takes a parameter mountpoint, which is a mount
point path of the filesystem to be frozen. This option can occur multi-
ple times. If this is not specified, every mounted filesystem is
frozen.
Note: snapshot-create command has a --quiesce option to freeze and thaw
the filesystems automatically to keep snapshots consistent. domfs-
freeze command is only needed when a user wants to utilize the native
snapshot features of storage devices not supported by libvirt.
domfsinfo
Syntax:
domfsinfo domain
Show a list of mounted filesystems within the running domain. The list
contains mountpoints, names of a mounted device in the guest, filesys-
tem types, and unique target names used in the domain XML (<target
dev='name'/>).
Note that this command requires a guest agent configured and running in
the domain's guest OS.
domfsthaw
Syntax:
domfsthaw domain [[--mountpoint] mountpoint...]
Thaw mounted filesystems within a running domain, which have been
frozen by domfsfreeze command.
The --mountpoint option takes a parameter mountpoint, which is a mount
point path of the filesystem to be thawed. This option can occur multi-
ple times. If this is not specified, every mounted filesystem is
thawed.
domfstrim
Syntax:
domfstrim domain [--minimum bytes] [--mountpoint mountPoint]
Issue a fstrim command on all mounted filesystems within a running do-
main. It discards blocks which are not in use by the filesystem. If
--minimum bytes is specified, it tells guest kernel length of contigu-
ous free range. Smaller than this may be ignored (this is a hint and
the guest may not respect it). By increasing this value, the fstrim op-
eration will complete more quickly for filesystems with badly frag-
mented free space, although not all blocks will be discarded. The de-
fault value is zero, meaning "discard every free block". Moreover, if a
user wants to trim only one mount point, it can be specified via op-
tional --mountpoint parameter.
domhostname
Syntax:
domhostname domain [--source lease|agent]
Returns the hostname of a domain, if the hypervisor makes it available.
The --source argument specifies what data source to use for the host-
names, currently 'lease' to read DHCP leases or 'agent' to query the
guest OS via an agent. If unspecified, driver returns the default
method available (some drivers support only one type of source).
domid
Syntax:
domid domain-name-or-uuid
Convert a domain name (or UUID) to a domain id
domif-getlink
Syntax:
domif-getlink domain interface-device [--config]
Query link state of the domain's virtual interface. If --config is
specified, query the persistent configuration, for compatibility pur-
poses, --persistent is alias of --config.
interface-device can be the interface's target name or the MAC address.
domif-setlink
Syntax:
domif-setlink domain interface-device state [--config] [--print-xml]
Modify link state of the domain's virtual interface. Possible values
for state are "up" and "down". If --config is specified, only the per-
sistent configuration of the domain is modified, for compatibility pur-
poses, --persistent is alias of --config. interface-device can be the
interface's target name or the MAC address.
If --print-xml is specified, then the XML used to update the interface
is printed instead.
domifaddr
Syntax:
domifaddr domain [interface] [--full]
[--source lease|agent|arp]
Get a list of interfaces of a running domain along with their IP and
MAC addresses, or limited output just for one interface if interface is
specified. Note that interface can be driver dependent, it can be the
name within guest OS or the name you would see in domain XML. Moreover,
the whole command may require a guest agent to be configured for the
queried domain under some hypervisors, notably QEMU.
If --full is specified, the interface name and MAC address is always
displayed when the interface has multiple IP addresses or aliases; oth-
erwise, only the interface name and MAC address is displayed for the
first name and MAC address with "-" for the others using the same name
and MAC address.
The --source argument specifies what data source to use for the ad-
dresses, currently 'lease' to read DHCP leases, 'agent' to query the
guest OS via an agent, or 'arp' to get IP from host's arp tables. If
unspecified, 'lease' is the default.
backup-begin
Syntax:
backup-begin domain [backupxml] [checkpointxml] [--reuse-external]
Begin a new backup job. If backupxml is omitted, this defaults to a
full backup using a push model to filenames generated by libvirt; sup-
plying XML allows fine-tuning such as requesting an incremental backup
relative to an earlier checkpoint, controlling which disks participate
or which filenames are involved, or requesting the use of a pull model
backup. The backup-dumpxml command shows any resulting values assigned
by libvirt. For more information on backup XML, see:
https://libvirt.org/formatbackup.html
If --reuse-external is used it instructs libvirt to reuse temporary and
output files provided by the user in backupxml.
If checkpointxml is specified, a second file with a top-level element
of domaincheckpoint is used to create a simultaneous checkpoint, for
doing a later incremental backup relative to the time the backup was
created. See checkpoint-create for more details on checkpoints.
This command returns as soon as possible, and the backup job runs in
the background; the progress of a push model backup can be checked with
domjobinfo or by waiting for an event with event (the progress of a
pull model backup is under the control of whatever third party connects
to the NBD export). The job is ended with domjobabort.
backup-dumpxml
Syntax:
backup-dumpxml [--xpath EXPRESSION] [--wrap] domain
Output XML describing the current backup job.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
domiflist
Syntax:
domiflist domain [--inactive]
Print a table showing the brief information of all virtual interfaces
associated with domain. If --inactive is specified, query the virtual
interfaces that will be used on the next boot, rather than those cur-
rently in use by a running domain. Other contexts that require a MAC
address of virtual interface (such as detach-interface or
domif-setlink) will accept the MAC address printed by this command.
domifstat
Syntax:
domifstat domain interface-device
Get network interface stats for a running domain. The network interface
stats are only available for interfaces that have a physical source in-
terface. This does not include, for example, a 'user' interface type
since it is a virtual LAN with NAT to the outside world. interface-de-
vice can be the interface target by name or MAC address.
domiftune
Syntax:
domiftune domain interface-device [[--config] [--live] | [--current]]
[*--inbound average,peak,burst,floor*]
[*--outbound average,peak,burst*]
Set or query the domain's network interface's bandwidth parameters.
interface-device can be the interface's target name (<target
dev='name'/>), or the MAC address.
If no --inbound or --outbound is specified, this command will query and
show the bandwidth settings. Otherwise, it will set the inbound or out-
bound bandwidth. average,peak,burst,floor is the same as in command at-
tach-interface. Values for average, peak and floor are expressed in
kilobytes per second, while burst is expressed in kilobytes in a single
burst at peak speed as described in the Network XML documentation at
https://libvirt.org/formatnetwork.html#quality-of-service.
To clear inbound or outbound settings, use --inbound or --outbound re-
spectfully with average value of zero.
If --live is specified, affect a running guest. If --config is speci-
fied, affect the next start of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. If no flag is specified, behavior is
different depending on hypervisor.
dominfo
Syntax:
dominfo domain
Returns basic information about the domain.
domjobabort
Syntax:
domjobabort domain [--postcopy]
Abort the currently running domain job.
When the job to be aborted is a migration which entered post-copy mode,
it cannot be aborted as none of the hosts involved in migration has a
complete state of the domain. Optional --postcopy can be used to inter-
rupt such migration although doing so may effectively suspend the do-
main until the migration is resumed (see also --postcopy-resume option
of migrate).
domjobinfo
Syntax:
domjobinfo domain [--completed [--keep-completed]] [--anystats] [--rawstats]
Returns information about jobs running on a domain. --completed tells
virsh to return information about a recently finished job. Statistics
of a completed job are automatically destroyed once read (unless
--keep-completed is used) or when libvirtd is restarted.
Normally only statistics for running and successful completed jobs are
printed. --anystats can be used to also display statistics for failed
jobs.
In case --rawstats is used, all fields are printed as received from the
server without any attempts to interpret the data. The "Job type:"
field is special, since it's reported by the API and not part of stats.
Note that time information returned for completed migrations may be
completely irrelevant unless both source and destination hosts have
synchronized time (i.e., NTP daemon is running on both of them).
domlaunchsecinfo
Syntax:
domlaunchsecinfo domain
Returns information about the launch security parameters associated
with a running domain.
The set of parameters reported will vary depending on which type of
launch security protection is active. If none is active, no parameters
will be reported.
domsetlaunchsecstate
Syntax:
domsetlaunchsecstate domain --secrethdr hdr-filename
--secret secret-filename [--set-address address]
Set a launch security secret in the guest's memory. The guest must have
a launchSecurity type enabled in its configuration and be in a paused
state. On success, the guest can be transitioned to a running state.
On failure, the guest should be destroyed.
--secrethdr specifies a filename containing the base64-encoded secret
header. The header includes artifacts needed by the hypervisor
firmware to recover the plain text of the launch secret. --secret spec-
ifies the filename containing the base64-encoded encrypted launch se-
cret.
The --set-address option can be used to specify a physical address
within the guest's memory to set the secret. If not specified, the ad-
dress will be determined by the hypervisor.
dommemstat
Syntax:
dommemstat domain [--period seconds] [[--config] [--live] | [--current]]
Get memory stats for a running domain.
Availability of these fields depends on hypervisor. Unsupported fields
are missing from the output. Other fields may appear if communicating
with a newer version of libvirtd.
Explanation of fields:
• swap_in - The amount of data read from swap space (in KiB)
• swap_out - The amount of memory written out to swap space
(in KiB)
• major_fault - The number of page faults where disk IO was re-
quired
• minor_fault - The number of other page faults
• unused - The amount of memory left unused by the system
(in KiB)
• available - The amount of usable memory as seen by the domain
(in KiB)
• actual - Current balloon value (in KiB)
• rss - Resident Set Size of the running domain's process
(in KiB)
• usable - The amount of memory which can be reclaimed by
balloon without causing host swapping (in KiB)
• last-update - Timestamp of the last update of statistics (in
seconds)
• disk_caches - The amount of memory that can be reclaimed with-
out additional I/O, typically disk caches (in KiB)
• hugetlb_pgalloc - The number of successful huge page allocations
initiated from within the domain
• hugetlb_pgfail - The number of failed huge page allocations initi-
ated from within the domain
For QEMU/KVM with a memory balloon, setting the optional --period to a
value larger than 0 in seconds will allow the balloon driver to return
additional statistics which will be displayed by subsequent dommemstat
commands. Setting the --period to 0 will stop the balloon driver col-
lection, but does not clear the statistics in the balloon driver. Re-
quires at least QEMU/KVM 1.5 to be running on the host.
The --live, --config, and --current flags are only valid when using the
--period option in order to set the collection period for the balloon
driver. If --live is specified, only the running guest collection pe-
riod is affected. If --config is specified, affect the next start of a
persistent guest. If --current is specified, it is equivalent to either
--live or --config, depending on the current state of the guest.
Both --live and --config flags may be given, but --current is exclu-
sive. If no flag is specified, behavior is different depending on the
guest state.
domname
Syntax:
domname domain-id-or-uuid
Convert a domain Id (or UUID) to domain name
dompmsuspend
Syntax:
dompmsuspend domain target [--duration]
Suspend a running domain into one of these states (possible target val-
ues):
• mem - equivalent of S3 ACPI state
• disk - equivalent of S4 ACPI state
• hybrid - RAM is saved to disk but not powered off
The --duration argument specifies number of seconds before the domain
is woken up after it was suspended (see also dompmwakeup). Default is 0
for unlimited suspend time. (This feature isn't currently supported by
any hypervisor driver and 0 should be used.).
Note that this command requires a guest agent configured and running in
the domain's guest OS.
Beware that at least for QEMU, the domain's process will be terminated
when target disk is used and a new process will be launched when lib-
virt is asked to wake up the domain. As a result of this, any runtime
changes, such as device hotplug or memory settings, are lost unless
such changes were made with --config flag.
dompmwakeup
Syntax:
dompmwakeup domain
Wakeup a domain from pmsuspended state (either suspended by dompmsus-
pend or from the guest itself). Injects a wakeup into the guest that is
in pmsuspended state, rather than waiting for the previously requested
duration (if any) to elapse. This operation does not necessarily fail
if the domain is running.
domrename
Syntax:
domrename domain new-name
Rename a domain. This command changes current domain name to the new
name specified in the second argument.
Note: Domain must be inactive.
domstate
Syntax:
domstate domain [--reason]
Returns state about a domain. --reason tells virsh to also print rea-
son for the state.
domstats
Syntax:
domstats [--raw] [--enforce] [--backing] [--nowait] [--state]
[--cpu-total] [--balloon] [--vcpu] [--interface]
[--block] [--perf] [--iothread] [--memory] [--dirtyrate] [--vm]
[[--list-active] [--list-inactive]
[--list-persistent] [--list-transient] [--list-running]y
[--list-paused] [--list-shutoff] [--list-other]] | [domain ...]
Get statistics for multiple or all domains. Without any argument this
command prints all available statistics for all domains.
The list of domains to gather stats for can be either limited by list-
ing the domains as a space separated list, or by specifying one of the
filtering flags --list-NNN. (The approaches can't be combined.)
By default some of the returned fields may be converted to more human
friendly values by a set of pretty-printers. To suppress this behavior
use the --raw flag.
The individual statistics groups are selectable via specific flags. By
default all supported statistics groups are returned. Supported statis-
tics groups flags are: --state, --cpu-total, --balloon, --vcpu, --in-
terface, --block, --perf, --iothread, --memory, --dirtyrate, --vm.
Note that - depending on the hypervisor type and version or the domain
state - not all of the following statistics may be returned.
When selecting the --state group the following fields are returned:
• state.state - state of the VM, returned as number from virDomainState
enum
• state.reason - reason for entering given state, returned as int from
virDomain*Reason enum corresponding to given state
--cpu-total returns:
• cpu.time - total cpu time spent for this domain in nanoseconds
• cpu.user - user cpu time spent in nanoseconds
• cpu.system - system cpu time spent in nanoseconds
• cpu.haltpoll.success.time - cpu halt polling success time spent in
nanoseconds
• cpu.haltpoll.fail.time - cpu halt polling fail time spent in nanosec-
onds
• cpu.cache.monitor.count - the number of cache monitors for this do-
main
• cpu.cache.monitor.<num>.name - the name of cache monitor <num>
• cpu.cache.monitor.<num>.vcpus - vcpu list of cache monitor <num>
• cpu.cache.monitor.<num>.bank.count - the number of cache banks in
cache monitor <num>
• cpu.cache.monitor.<num>.bank.<index>.id - host allocated cache id for
bank <index> in cache monitor <num>
• cpu.cache.monitor.<num>.bank.<index>.bytes - the number of bytes of
last level cache that the domain is using on cache bank <index>
--balloon returns:
• balloon.current - the memory in KiB currently used
• balloon.maximum - the maximum memory in KiB allowed
• balloon.swap_in - the amount of data read from swap space (in KiB)
• balloon.swap_out - the amount of memory written out to swap space (in
KiB)
• balloon.major_fault - the number of page faults when disk IO was re-
quired
• balloon.minor_fault - the number of other page faults
• balloon.unused - the amount of memory left unused by the system (in
KiB)
• balloon.available - the amount of usable memory as seen by the domain
(in KiB)
• balloon.rss - Resident Set Size of running domain's process (in KiB)
• balloon.usable - the amount of memory which can be reclaimed by bal-
loon without causing host swapping (in KiB)
• balloon.last-update - timestamp of the last update of statistics (in
seconds)
• balloon.disk_caches - the amount of memory that can be reclaimed
without additional I/O, typically disk (in KiB)
• balloon.hugetlb_pgalloc - the number of successful huge page alloca-
tions from inside the domain via virtio balloon
• balloon.hugetlb_pgfail - the number of failed huge page allocations
from inside the domain via virtio balloon
--vcpu returns:
• vcpu.current - current number of online virtual CPUs
• vcpu.maximum - maximum number of online virtual CPUs
• vcpu.<num>.state - state of the virtual CPU <num>, as number from
virVcpuState enum
• vcpu.<num>.time - virtual cpu time spent by virtual CPU <num> (in mi-
croseconds)
• vcpu.<num>.wait - virtual cpu time spent by virtual CPU <num> waiting
on I/O (in microseconds)
• vcpu.<num>.halted - virtual CPU <num> is halted: yes or no (may indi-
cate the processor is idle or even disabled, depending on the archi-
tecture)
• vcpu.<num>.delay - time the vCPU <num> thread was enqueued by the
host scheduler, but was waiting in the queue instead of running. Ex-
posed to the VM as a steal time.
This group of statistics also reports additional hypervisor-originating
per-vCPU stats. The hypervisor-specific statistics in this group have
the following naming scheme:
vcpu.<num>.$NAME.$TYPE
$NAME name of the statistics field provided by the hypervisor
$TYPE Type of the value. The following types are returned:
cur current instant value
sum aggregate value
max peak value
The returned value may be either an unsigned long long or a boolean.
Meaning is hypervisor specific. Please see the disclaimer for the
--vm group which also consists of hypervisor-specific stats.
--interface returns:
• net.count - number of network interfaces on this domain
• net.<num>.name - name of the interface <num>
• net.<num>.rx.bytes - number of bytes received
• net.<num>.rx.pkts - number of packets received
• net.<num>.rx.errs - number of receive errors
• net.<num>.rx.drop - number of receive packets dropped
• net.<num>.tx.bytes - number of bytes transmitted
• net.<num>.tx.pkts - number of packets transmitted
• net.<num>.tx.errs - number of transmission errors
• net.<num>.tx.drop - number of transmit packets dropped
--perf returns the statistics of all enabled perf events:
• perf.cmt - the cache usage in Byte currently used
• perf.mbmt - total system bandwidth from one level of cache
• perf.mbml - bandwidth of memory traffic for a memory controller
• perf.cpu_cycles - the count of cpu cycles (total/elapsed)
• perf.instructions - the count of instructions
• perf.cache_references - the count of cache hits
• perf.cache_misses - the count of caches misses
• perf.branch_instructions - the count of branch instructions
• perf.branch_misses - the count of branch misses
• perf.bus_cycles - the count of bus cycles
• perf.stalled_cycles_frontend - the count of stalled frontend cpu cy-
cles
• perf.stalled_cycles_backend - the count of stalled backend cpu cycles
• perf.ref_cpu_cycles - the count of ref cpu cycles
• perf.cpu_clock - the count of cpu clock time
• perf.task_clock - the count of task clock time
• perf.page_faults - the count of page faults
• perf.context_switches - the count of context switches
• perf.cpu_migrations - the count of cpu migrations
• perf.page_faults_min - the count of minor page faults
• perf.page_faults_maj - the count of major page faults
• perf.alignment_faults - the count of alignment faults
• perf.emulation_faults - the count of emulation faults
See the perf command for more details about each event.
--block returns information about disks associated with each domain.
Using the --backing flag extends this information to cover all re-
sources in the backing chain, rather than the default of limiting in-
formation to the active layer for each guest disk. Information listed
includes:
• block.count - number of block devices being listed
• block.<num>.name - name of the target of the block device <num> (the
same name for multiple entries if --backing is present)
• block.<num>.backingIndex - when --backing is present, matches up with
the <backingStore> index listed in domain XML for backing files
• block.<num>.path - file source of block device <num>, if it is a lo-
cal file or block device
• block.<num>.rd.reqs - number of read requests
• block.<num>.rd.bytes - number of read bytes
• block.<num>.rd.times - total time (ns) spent on reads
• block.<num>.wr.reqs - number of write requests
• block.<num>.wr.bytes - number of written bytes
• block.<num>.wr.times - total time (ns) spent on writes
• block.<num>.fl.reqs - total flush requests
• block.<num>.fl.times - total time (ns) spent on cache flushing
• block.<num>.errors - Xen only: the 'oo_req' value
• block.<num>.allocation - offset of highest written sector in bytes
• block.<num>.capacity - logical size of source file in bytes
• block.<num>.physical - physical size of source file in bytes
• block.<num>.threshold - threshold (in bytes) for delivering the
VIR_DOMAIN_EVENT_ID_BLOCK_THRESHOLD event. See domblkthreshold.
--iothread returns information about IOThreads on the running guest if
supported by the hypervisor.
The "poll-max-ns" for each thread is the maximum nanoseconds to allow
each polling interval to occur. A polling interval is a period of time
allowed for a thread to process data before being the guest gives up
its CPU quantum back to the host. A value set too small will not allow
the IOThread to run long enough on a CPU to process data. A value set
too high will consume too much CPU time per IOThread failing to allow
other threads running on the CPU to get time. The polling interval is
not available for statistical purposes.
•
iothread.count - maximum number of IOThreads in the subsequent list
as unsigned int. Each IOThread in the list will will use it's
iothread_id value as the <id>. There may be fewer <id> entries
than the iothread.count value if the polling values are not
supported.
• iothread.<id>.poll-max-ns - maximum polling time in nanoseconds used
by the <id> IOThread. A value of 0 (zero) indicates polling is dis-
abled.
• iothread.<id>.poll-grow - polling time grow value. A value of 0
(zero) growth is managed by the hypervisor.
• iothread.<id>.poll-shrink - polling time shrink value. A value of
(zero) indicates shrink is managed by hypervisor.
--memory returns:
• memory.bandwidth.monitor.count - the number of memory bandwidth moni-
tors for this domain
• memory.bandwidth.monitor.<num>.name - the name of monitor <num>
• memory.bandwidth.monitor.<num>.vcpus - the vcpu list of monitor <num>
•
memory.bandwidth.monitor.<num>.node.count - the number of memory
controller in monitor <num>
• memory.bandwidth.monitor.<num>.node.<index>.id - host allocated mem-
ory controller id for controller <index> of monitor <num>
• memory.bandwidth.monitor.<num>.node.<index>.bytes.local - the accumu-
lative bytes consumed by @vcpus that passing through the memory con-
troller in the same processor that the scheduled host CPU belongs to.
• memory.bandwidth.monitor.<num>.node.<index>.bytes.total - the total
bytes consumed by @vcpus that passing through all memory controllers,
either local or remote controller.
--dirtyrate returns:
• dirtyrate.calc_status - the status of last memory dirty rate calcula-
tion, returned as number from virDomainDirtyRateStatus enum.
• dirtyrate.calc_start_time - the start time of last memory dirty rate
calculation.
• dirtyrate.calc_period - the period of last memory dirty rate calcula-
tion.
• dirtyrate.megabytes_per_second - the calculated memory dirty rate in
MiB/s.
• dirtyrate.calc_mode - the calculation mode used last measurement
(page-sampling/dirty-bitmap/dirty-ring)
• dirtyrate.vcpu.<num>.megabytes_per_second - the calculated memory
dirty rate for a virtual cpu in MiB/s
--vm returns:
The --vm option enables reporting of hypervisor-specific statistics.
Naming and meaning of the fields is entirely hypervisor dependent.
The statistics in this group have the following naming scheme:
vm.$NAME.$TYPE
$NAME name of the statistics field provided by the hypervisor
$TYPE Type of the value. The following types are returned:
cur current instant value
sum aggregate value
max peak value
The returned value may be either an unsigned long long or a boolean.
WARNING: The stats reported in this group are runtime-collected and
hypervisor originated, thus fall outside of the usual stable API
policies of libvirt.
Libvirt can't guarantee that the statistics reported from the out-
side source will be present in further versions of the hypervisor,
or that naming or meaning will stay consistent. Changes to existing
fields, however, are expected to be rare.
Selecting a specific statistics groups doesn't guarantee that the dae-
mon supports the selected group of stats. Flag --enforce forces the
command to fail if the daemon doesn't support the selected group.
When collecting stats libvirtd may wait for some time if there's al-
ready another job running on given domain for it to finish. This may
cause unnecessary delay in delivering stats. Using --nowait suppresses
this behaviour. On the other hand some statistics might be missing for
such domain.
domtime
Syntax:
domtime domain { [--now] [--pretty] [--sync] [--time time] }
Gets or sets the domain's system time. When run without any arguments
(but domain), the current domain's system time is printed out. The
--pretty modifier can be used to print the time in more human readable
form.
When --time time is specified, the domain's time is not gotten but set
instead. The --now modifier acts like if it was an alias for --time
$now, which means it sets the time that is currently on the host virsh
is running at. In both cases (setting and getting), time is in seconds
relative to Epoch of 1970-01-01 in UTC. The --sync modifies the set
behavior a bit: The time passed is ignored, but the time to set is read
from domain's RTC instead. Please note, that some hypervisors may re-
quire a guest agent to be configured in order to get or set the guest
time.
domuuid
Syntax:
domuuid domain-name-or-id
Convert a domain name or id to domain UUID
domxml-from-native
Syntax:
domxml-from-native format config
Convert the file config in the native guest configuration format named
by format to a domain XML format. For QEMU/KVM hypervisor, the format
argument must be qemu-argv. For Xen hypervisor, the format argument may
be xen-xm, xen-xl, or xen-sxpr. For LXC hypervisor, the format argument
must be lxc-tools. For VMware/ESX hypervisor, the format argument must
be vmware-vmx. For the Bhyve hypervisor, the format argument must be
bhyve-argv.
domxml-to-native
Syntax:
domxml-to-native format { [--xml] xml | --domain domain-name-or-id-or-uuid }
Convert the file xml into domain XML format or convert an existing
--domain to the native guest configuration format named by format. The
xml and --domain arguments are mutually exclusive. For the types of
format argument, refer to domxml-from-native.
dump
Syntax:
dump domain corefilepath [--bypass-cache]
{ [--live] | [--crash] | [--reset] }
[--verbose] [--memory-only] [--format string]
Dumps the core of a domain to a file for analysis. If --live is speci-
fied, the domain continues to run until the core dump is complete,
rather than pausing up front. If --crash is specified, the domain is
halted with a crashed status, rather than merely left in a paused
state. If --reset is specified, the domain is reset after successful
dump. Note, these three switches are mutually exclusive. If --by-
pass-cache is specified, the save will avoid the file system cache, al-
though this may slow down the operation. If --memory-only is speci-
fied, the file is elf file, and will only include domain's memory and
cpu common register value. It is very useful if the domain uses host
devices directly. --format string is used to specify the format of
'memory-only' dump, and string can be one of: elf,
kdump-zlib(kdump-compressed format with zlib-compressed),
kdump-lzo(kdump-compressed format with lzo-compressed),
kdump-snappy(kdump-compressed format with snappy-compressed),
win-dmp(Windows full crashdump format).
The progress may be monitored using domjobinfo virsh command and can-
celed with domjobabort command (sent by another virsh instance). An-
other option is to send SIGINT (usually with Ctrl-C) to the virsh
process running dump command. --verbose displays the progress of dump.
NOTE: Some hypervisors may require the user to manually ensure proper
permissions on file and path specified by argument corefilepath.
NOTE: Crash dump in a old kvmdump format is being obsolete and cannot
be loaded and processed by crash utility since its version 6.1.0. A
--memory-only option is required in order to produce valid ELF file
which can be later processed by the crash utility.
dumpxml
Syntax:
dumpxml [--inactive] [--security-info] [--update-cpu] [--migratable]
[--xpath EXPRESSION] [--wrap] domain
Output the domain information as an XML dump to stdout, this format can
be used by the create command. Additional options affecting the XML
dump may be used. --inactive tells virsh to dump domain configuration
that will be used on next start of the domain as opposed to the current
domain configuration. Using --security-info will also include security
sensitive information in the XML dump. --update-cpu updates domain CPU
requirements according to host CPU. With --migratable one can request
an XML that is suitable for migrations, i.e., compatible with older
libvirt releases and possibly amended with internal run-time options.
This option may automatically enable other options (--update-cpu, --se-
curity-info, ...) as necessary.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
edit
Syntax:
edit domain
Edit the XML configuration file for a domain, which will affect the
next boot of the guest.
This is equivalent to:
virsh dumpxml --inactive --security-info domain > domain.xml
vi domain.xml (or make changes with your other text editor)
virsh define domain.xml
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
emulatorpin
Syntax:
emulatorpin domain [cpulist] [[--live] [--config] | [--current]]
Query or change the pinning of domain's emulator threads to host physi-
cal CPUs.
See vcpupin for cpulist.
If --live is specified, affect a running guest. If --config is speci-
fied, affect the next start of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given if cpulist is present, but --current is exclusive. If no flag is
specified, behavior is different depending on hypervisor.
event
Syntax:
event {[domain] { event | --all } [--loop] [--timeout seconds] [--timestamp] | --list}
Wait for a class of domain events to occur, and print appropriate de-
tails of events as they happen. The events can optionally be filtered
by domain. Using --list as the only argument will provide a list of
possible event values known by this client, although the connection
might not allow registering for all these events. It is also possible
to use --all instead of event to register for all possible event types
at once.
By default, this command is one-shot, and returns success once an event
occurs; you can send SIGINT (usually via Ctrl-C) to quit immediately.
If --timeout is specified, the command gives up waiting for events af-
ter seconds have elapsed. With --loop, the command prints all events
until a timeout or interrupt key.
When --timestamp is used, a human-readable timestamp will be printed
before the event.
get-user-sshkeys
Syntax:
get-user-sshkeys domain user
Print SSH authorized keys for given user in the guest domain. Please
note, that an entry in the file has internal structure as defined by
sshd(8) and virsh/libvirt does handle keys as opaque strings, i.e. does
not interpret them.
guest-agent-timeout
Syntax:
guest-agent-timeout domain [--timeout value]
Set how long to wait for a response from guest agent commands. By de-
fault, agent commands block forever waiting for a response. value must
be a positive value (wait for given amount of seconds) or one of the
following values:
• -2 - block forever waiting for a result (used when --timeout is omit-
ted),
• -1 - reset timeout to the default value (currently defined as 5 sec-
onds in libvirt daemon),
• 0 - do not wait at all,
guestinfo
Syntax:
guestinfo domain [--user] [--os] [--timezone] [--hostname] [--filesystem]
[--disk] [--interface]
Print information about the guest from the point of view of the guest
agent. Note that this command requires a guest agent to be configured
and running in the domain's guest OS.
When run without any arguments, this command prints all information
types that are supported by the guest agent at that point, omitting un-
available ones. Success is always reported in this case.
You can limit the types of information that are returned by specifying
one or more flags. Available information types flags are --user, --os,
--timezone, --hostname, --filesystem, --disk and --interface. If an
explicitly requested information type is not supported by the guest
agent at that point, the processes will provide an exit code of 1.
Note that depending on the hypervisor type and the version of the guest
agent running within the domain, not all of the following information
may be returned.
When selecting the --user information type, the following fields may be
returned:
• user.count - the number of active users on this domain
• user.<num>.name - username of user <num>
• user.<num>.domain - domain of the user <num> (may only be present on
certain guets types)
• user.<num>.login-time - the login time of user <num> in milliseconds
since the epoch
--os returns:
• os.id - a string identifying the operating system
• os.name - the name of the operating system
• os.pretty-name - a pretty name for the operating system
• os.version - the version of the operating system
• os.version-id - the version id of the operating system
• os.kernel-release - the release of the operating system kernel
• os.kernel-version - the version of the operating system kernel
• os.machine - the machine hardware name
• os.variant - a specific variant or edition of the operating system
• os.variant-id - the id for a specific variant or edition of the oper-
ating system
--timezone returns:
• timezone.name - the name of the timezone
• timezone.offset - the offset to UTC in seconds
--hostname returns:
• hostname - the hostname of the domain
--filesystem returns:
• fs.count - the number of filesystems defined on this domain
• fs.<num>.mountpoint - the path to the mount point for filesystem
<num>
• fs.<num>.name - device name in the guest (e.g. sda1) for filesystem
<num>
• fs.<num>.fstype - the type of filesystem <num>
• fs.<num>.total-bytes - the total size of filesystem <num>
• fs.<num>.used-bytes - the number of bytes used in filesystem <num>
• fs.<num>.disk.count - the number of disks targeted by filesystem
<num>
• fs.<num>.disk.<num>.alias - the device alias of disk <num> (e.g. sda)
• fs.<num>.disk.<num>.serial - the serial number of disk <num>
• fs.<num>.disk.<num>.device - the device node of disk <num>
--disk returns:
• disk.count - the number of disks defined on this domain
• disk.<num>.name - device node (Linux) or device UNC (Windows)
• disk.<num>.partition - whether this is a partition or disk
• disk.<num>.dependency.count - the number of device dependencies
• disk.<num>.dependency.<num>.name - a dependency name
• disk.<num>.serial - optional disk serial number
• disk.<num>.alias - the device alias of the disk (e.g. sda)
• disk.<num>.guest_alias - optional alias assigned to the disk
--interface returns: * if.count - the number of interfaces defined on
this domain * if.<num>.name - name in the guest (e.g. eth0) for inter-
face <num> * if.<num>.hwaddr - hardware address in the guest for inter-
face <num> * if.<num>.addr.count - the number of IP addresses of inter-
face <num> * if.<num>.addr.<num1>.type - the IP address type of addr
<num1> (e.g. ipv4) * if.<num>.addr.<num1>.addr - the IP address of addr
<num1> * if.<num>.addr.<num1>.prefix - the prefix of IP address of addr
<num1>
guestvcpus
Syntax:
guestvcpus domain [[--enable] | [--disable]] [cpulist]
Query or change state of vCPUs from guest's point of view using the
guest agent. When invoked without cpulist the guest is queried for
available guest vCPUs, their state and possibility to be offlined.
If cpulist is provided then one of --enable or --disable must be pro-
vided too. The desired operation is then executed on the domain.
See vcpupin for information on cpulist.
iothreadadd
Syntax:
iothreadadd domain iothread_id [[--config] [--live] | [--current]]
Add a new IOThread to the domain using the specified iothread_id. If
the iothread_id already exists, the command will fail. The iothread_id
must be greater than zero.
If --live is specified, affect a running guest. If the guest is not
running an error is returned. If --config is specified, affect the
next start of a persistent guest. If --current is specified, it is
equivalent to either --live or --config, depending on the current state
of the guest.
iothreaddel
Syntax:
iothreaddel domain iothread_id [[--config] [--live] | [--current]]
Delete an IOThread from the domain using the specified iothread_id. If
an IOThread is currently assigned to a disk resource such as via the
attach-disk command, then the attempt to remove the IOThread will fail.
If the iothread_id does not exist an error will occur.
If --live is specified, affect a running guest. If the guest is not
running an error is returned. If --config is specified, affect the
next start of a persistent guest. If --current is specified, it is
equivalent to either --live or --config, depending on the current state
of the guest.
iothreadinfo
Syntax:
iothreadinfo domain [[--live] [--config] | [--current]]
Display basic domain IOThreads information including the IOThread ID
and the CPU Affinity for each IOThread.
If --live is specified, get the IOThreads data from the running guest.
If the guest is not running, an error is returned. If --config is
specified, get the IOThreads data from the next start of a persistent
guest. If --current is specified or --live and --config are not speci-
fied, then get the IOThread data based on the current guest state,
which can either be live or offline.
iothreadpin
Syntax:
iothreadpin domain iothread cpulist [[--live] [--config] | [--current]]
Change the pinning of a domain IOThread to host physical CPUs. In order
to retrieve a list of all IOThreads, use iothreadinfo. To pin an io-
thread specify the cpulist desired for the IOThread ID as listed in the
iothreadinfo output.
cpulist is a list of physical CPU numbers. Its syntax is a comma sepa-
rated list and a special markup using '-' and '^' (ex. '0-4', '0-3,^2')
can also be allowed. The '-' denotes the range and the '^' denotes ex-
clusive. If you want to reset iothreadpin setting, that is, to pin an
iothread to all physical cpus, simply specify 'r' as a cpulist.
If --live is specified, affect a running guest. If the guest is not
running, an error is returned. If --config is specified, affect the
next start of a persistent guest. If --current is specified, it is
equivalent to either --live or --config, depending on the current state
of the guest. Both --live and --config flags may be given if cpulist
is present, but --current is exclusive. If no flag is specified, be-
havior is different depending on hypervisor.
Note: The expression is sequentially evaluated, so "0-15,^8" is identi-
cal to "9-14,0-7,15" but not identical to "^8,0-15".
iothreadset
Syntax:
iothreadset domain iothread_id [[--poll-max-ns ns] [--poll-grow factor]
[--poll-shrink divisor] [--thread-pool-min value]
[--thread-pool-max value]]
[[--config] [--live] | [--current]]
Modifies an existing iothread of the domain using the specified io-
thread_id. The --poll-max-ns provides the maximum polling interval to
be allowed for an IOThread in ns. If a 0 (zero) is provided, then
polling for the IOThread is disabled. The --poll-grow is the factor by
which the current polling time will be adjusted in order to reach the
maximum polling time. If a 0 (zero) is provided, then the default fac-
tor will be used. The --poll-shrink is the quotient by which the cur-
rent polling time will be reduced in order to get below the maximum
polling interval. If a 0 (zero) is provided, then the default quotient
will be used. The polling values are purely dynamic for a running
guest. Saving, destroying, stopping, etc. the guest will result in the
polling values returning to hypervisor defaults at the next start, re-
store, etc.
The --thread-pool-min and --thread-pool-max options then set lower and
upper bound, respectively of number of threads in worker pool of given
iothread. For changes to an inactive configuration -1 can be specified
to remove corresponding boundary from the domain configuration. For
changes to a running guest it's recommended to set the upper boundary
first (--thread-pool-max) and only after that set the lower boundary
(--thread-pool-min). It is allowed for the lower boundary to be the
same as the upper boundary, however it's not allowed for the upper
boundary to be value of zero.
If --live is specified, affect a running guest. If the guest is not
running an error is returned. If --current is specified or --live is
not specified, then handle as if --live was specified. (Where "cur-
rent" here means whatever the present guest state is: live or offline.)
managedsave
Syntax:
managedsave domain [--bypass-cache] [{--running | --paused}] [--verbose]
Save and destroy (stop) a running domain, so it can be restarted from
the same state at a later time. When the virsh start command is next
run for the domain, it will automatically be started from this saved
state. If --bypass-cache is specified, the save will avoid the file
system cache, although this may slow down the operation.
The progress may be monitored using domjobinfo virsh command and can-
celed with domjobabort command (sent by another virsh instance). An-
other option is to send SIGINT (usually with Ctrl-C) to the virsh
process running managedsave command. --verbose displays the progress of
save.
Normally, starting a managed save will decide between running or paused
based on the state the domain was in when the save was done; passing
either the --running or --paused flag will allow overriding which state
the start should use.
The dominfo command can be used to query whether a domain currently has
any managed save image.
managedsave-define
Syntax:
managedsave-define domain xml [{--running | --paused}]
Update the domain XML that will be used when domain is later started.
The xml argument must be a file name containing the alternative XML,
with changes only in the host-specific portions of the domain XML. For
example, it can be used to change disk file paths.
The managed save image records whether the domain should be started to
a running or paused state. Normally, this command does not alter the
recorded state; passing either the --running or --paused flag will al-
low overriding which state the start should use.
managedsave-dumpxml
Syntax:
managedsave-dumpxml [--security-info] [--xpath EXPRESSION] [--wrap] domain
Extract the domain XML that was in effect at the time the saved state
file file was created with the managedsave command. Using --secu-
rity-info will also include security sensitive information.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
managedsave-edit
Syntax:
managedsave-edit domain [{--running | --paused}]
Edit the XML configuration associated with a saved state file of a do-
main was created by the managedsave command.
The managed save image records whether the domain should be started to
a running or paused state. Normally, this command does not alter the
recorded state; passing either the --running or --paused flag will al-
low overriding which state the restore should use.
This is equivalent to:
virsh managedsave-dumpxml domain-name > state-file.xml
vi state-file.xml (or make changes with your other text editor)
virsh managedsave-define domain-name state-file-xml
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
managedsave-remove
Syntax:
managedsave-remove domain
Remove the managedsave state file for a domain, if it exists. This en-
sures the domain will do a full boot the next time it is started.
maxvcpus
Syntax:
maxvcpus [type]
Provide the maximum number of virtual CPUs supported for a guest VM on
this connection. If provided, the type parameter must be a valid type
attribute for the <domain> element of XML.
memtune
Syntax:
memtune domain [--hard-limit size] [--soft-limit size] [--swap-hard-limit size]
[--min-guarantee size] [[--config] [--live] | [--current]]
Allows you to display or set the domain memory parameters. Without
flags, the current settings are displayed; with a flag, the appropriate
limit is adjusted if supported by the hypervisor. LXC and QEMU/KVM
support --hard-limit, --soft-limit, and --swap-hard-limit. --min-guar-
antee is supported only by ESX hypervisor. Each of these limits are
scaled integers (see NOTES above), with a default of kibibytes (blocks
of 1024 bytes) if no suffix is present. Libvirt rounds up to the near-
est kibibyte. Some hypervisors require a larger granularity than KiB,
and requests that are not an even multiple will be rounded up. For ex-
ample, vSphere/ESX rounds the parameter up to mebibytes (1024
kibibytes).
If --live is specified, affect a running guest. If --config is speci-
fied, affect the next start of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. If no flag is specified, behavior is
different depending on hypervisor.
For QEMU/KVM, the parameters are applied to the QEMU process as a
whole. Thus, when counting them, one needs to add up guest RAM, guest
video RAM, and some memory overhead of QEMU itself. The last piece is
hard to determine so one needs guess and try.
For LXC, the displayed hard_limit value is the current memory setting
from the XML or the results from a virsh setmem command.
• --hard-limit
The maximum memory the guest can use.
• --soft-limit
The memory limit to enforce during memory contention.
• --swap-hard-limit
The maximum memory plus swap the guest can use. This has to be more
than hard-limit value provided.
• --min-guarantee
The guaranteed minimum memory allocation for the guest.
Specifying -1 as a value for these limits is interpreted as unlimited.
metadata
Syntax:
metadata domain [[--live] [--config] | [--current]]
[--edit] [uri] [key] [set] [--remove]
Show or modify custom XML metadata of a domain. The metadata is a user
defined XML that allows storing arbitrary XML data in the domain defi-
nition. Multiple separate custom metadata pieces can be stored in the
domain XML. The pieces are identified by a private XML namespace pro-
vided via the uri argument. (See also desc that works with textual
metadata of a domain.)
Flags --live or --config select whether this command works on live or
persistent definitions of the domain. If both --live and --config are
specified, the --config option takes precedence on getting the current
description and both live configuration and config are updated while
setting the description. --current is exclusive and implied if none of
these was specified.
Flag --remove specifies that the metadata element specified by the uri
argument should be removed rather than updated.
Flag --edit specifies that an editor with the metadata identified by
the uri argument should be opened and the contents saved back after-
wards. Otherwise the new contents can be provided via the set argu-
ment.
When setting metadata via --edit or set the key argument must be speci-
fied and is used to prefix the custom elements to bind them to the pri-
vate namespace.
If neither of --edit and set are specified the XML metadata correspond-
ing to the uri namespace is displayed instead of being modified.
migrate
Syntax:
migrate [--live] [--offline] [--direct] [--p2p [--tunnelled]]
[--persistent] [--undefinesource] [--suspend] [--copy-storage-all]
[--copy-storage-inc] [--change-protection] [--unsafe] [--verbose]
[--rdma-pin-all] [--abort-on-error] [--postcopy]
[--postcopy-after-precopy] [--postcopy-resume] [--zerocopy]
domain desturi [migrateuri] [graphicsuri] [listen-address] [dname]
[--timeout seconds [--timeout-suspend | --timeout-postcopy]]
[--xml file] [--migrate-disks disk-list] [--disks-port port]
[--compressed] [--comp-methods method-list]
[--comp-mt-level] [--comp-mt-threads] [--comp-mt-dthreads]
[--comp-xbzrle-cache] [--auto-converge] [auto-converge-initial]
[auto-converge-increment] [--persistent-xml file] [--tls]
[--postcopy-bandwidth bandwidth]
[--parallel [--parallel-connections connections]]
[--bandwidth bandwidth] [--tls-destination hostname]
[--disks-uri URI] [--copy-storage-synchronous-writes]
Migrate domain to another host. Add --live for live migration; <--p2p>
for peer-2-peer migration; --direct for direct migration; or --tun-
nelled for tunnelled migration. --offline migrates domain definition
without starting the domain on destination and without stopping it on
source host. Offline migration may be used with inactive domains and
it must be used with --persistent option.
--persistent leaves the domain persistent on destination host, --unde-
finesource undefines the domain on the source host, and --suspend
leaves the domain paused on the destination host.
--copy-storage-all indicates migration with non-shared storage with
full disk copy, --copy-storage-inc indicates migration with non-shared
storage with incremental copy (same base image shared between source
and destination). In both cases the disk images have to exist on des-
tination host, the --copy-storage-... options only tell libvirt to
transfer data from the images on source host to the images found at the
same place on the destination host. By default only non-shared
non-readonly images are transferred. Use --migrate-disks to explicitly
specify a list of disk targets to transfer via the comma separated
disk-list argument. With --copy-storage-synchronous-writes flag used
the disk data migration will synchronously handle guest disk writes to
both the original source and the destination to ensure that the disk
migration converges at the price of possibly decreased burst perfor-
mance.
--change-protection enforces that no incompatible configuration changes
will be made to the domain while the migration is underway; this flag
is implicitly enabled when supported by the hypervisor, but can be ex-
plicitly used to reject the migration if the hypervisor lacks change
protection support.
--verbose displays the progress of migration.
--abort-on-error cancels the migration if a soft error (for example I/O
error) happens during the migration.
--postcopy enables post-copy logic in migration, but does not actually
start post-copy, i.e., migration is started in pre-copy mode. Once mi-
gration is running, the user may switch to post-copy using the mi-
grate-postcopy command sent from another virsh instance or use --post-
copy-after-precopy along with --postcopy to let libvirt automatically
switch to post-copy after the first pass of pre-copy is finished. The
maximum bandwidth consumed during the post-copy phase may be limited
using --postcopy-bandwidth. The maximum bandwidth consumed during the
pre-copy phase may be limited using --bandwidth. In case connection be-
tween the hosts breaks while migration is in post-copy mode, the domain
cannot be resumed on either source or destination host and the migrate
command will report an error leaving the domain active on both hosts.
To recover from such situation repeat the original migrate command with
an additional --postcopy-resume flag.
--auto-converge forces convergence during live migration. The initial
guest CPU throttling rate can be set with auto-converge-initial. If the
initial throttling rate is not enough to ensure convergence, the rate
is periodically increased by auto-converge-increment.
--rdma-pin-all can be used with RDMA migration (i.e., when migrateuri
starts with rdma://) to tell the hypervisor to pin all domain's memory
at once before migration starts rather than letting it pin memory pages
as needed. For QEMU/KVM this requires hard_limit memory tuning element
(in the domain XML) to be used and set to the maximum memory configured
for the domain plus any memory consumed by the QEMU process itself. Be-
ware of setting the memory limit too high (and thus allowing the domain
to lock most of the host's memory). Doing so may be dangerous to both
the domain and the host itself since the host's kernel may run out of
memory.
--zerocopy requests zero-copy mechanism to be used for migrating memory
pages. For QEMU/KVM this means QEMU will be temporarily allowed to
lock all guest pages in host's memory, although only those that are
queued for transfer will be locked at the same time.
Note: Individual hypervisors usually do not support all possible types
of migration. For example, QEMU does not support direct migration.
In some cases libvirt may refuse to migrate the domain because doing so
may lead to potential problems such as data corruption, and thus the
migration is considered unsafe. For QEMU domain, this may happen if the
domain uses disks without explicitly setting cache mode to "none". Mi-
grating such domains is unsafe unless the disk images are stored on co-
herent clustered filesystem, such as GFS2 or GPFS. If you are sure the
migration is safe or you just do not care, use --unsafe to force the
migration.
dname is used for renaming the domain to new name during migration,
which also usually can be omitted. Likewise, --xml file is usually
omitted, but can be used to supply an alternative XML file for use on
the destination to supply a larger set of changes to any host-specific
portions of the domain XML, such as accounting for naming differences
between source and destination in accessing underlying storage. If
--persistent is enabled, --persistent-xml file can be used to supply an
alternative XML file which will be used as the persistent guest defini-
tion on the destination host.
--timeout seconds tells virsh to run a specified action when live mi-
gration exceeds that many seconds. It can only be used with --live.
If --timeout-suspend is specified, the domain will be suspended after
the timeout and the migration will complete offline; this is the de-
fault if no --timeout-\`` option is specified on the command line.
When *--timeout-postcopy is used, virsh will switch migration from
pre-copy to post-copy upon timeout; migration has to be started with
--postcopy option for this to work.
--compressed activates compression, the compression method is chosen
with --comp-methods. Supported methods are "mt" and "xbzrle" and can be
used in any combination. When no methods are specified, a hypervisor
default methods will be used. QEMU defaults to "xbzrle". Compression
methods can be tuned further. --comp-mt-level sets compression level.
Values are in range from 0 to 9, where 1 is maximum speed and 9 is max-
imum compression. --comp-mt-threads and --comp-mt-dthreads set the num-
ber of compress threads on source and the number of decompress threads
on target respectively. --comp-xbzrle-cache sets size of page cache in
bytes.
Providing --tls causes the migration to use the host configured TLS
setup (see migrate_tls_x509_cert_dir in /etc/libvirt/qemu.conf) in or-
der to perform the migration of the domain. Usage requires proper TLS
setup for both source and target. Normally the TLS certificate from the
destination host must match the host's name for TLS verification to
succeed. When the certificate does not match the destination hostname
and the expected certificate's hostname is known, --tls-destination can
be used to pass the expected hostname when starting the migration.
--parallel option will cause migration data to be sent over multiple
parallel connections. The number of such connections can be set using
--parallel-connections. Parallel connections may help with saturating
the network link between the source and the target and thus speeding up
the migration.
Running migration can be canceled by interrupting virsh (usually using
Ctrl-C) or by domjobabort command sent from another virsh instance.
The desturi and migrateuri parameters can be used to control which des-
tination the migration uses. desturi is important for managed migra-
tion, but unused for direct migration; migrateuri is required for di-
rect migration, but can usually be automatically determined for managed
migration.
Note: The desturi parameter for normal migration and peer2peer migra-
tion has different semantics:
• normal migration: the desturi is an address of the target host as
seen from the client machine.
• peer2peer migration: the desturi is an address of the target host as
seen from the source machine.
In a special circumstance where you require a complete control of the
connection and/or libvirt does not have network access to the remote
side you can use a UNIX transport in the URI and specify a socket path
in the query, for example with the qemu driver you could use this:
qemu+unix:///system?socket=/path/to/socket
When migrateuri is not specified, libvirt will automatically determine
the hypervisor specific URI. Some hypervisors, including QEMU, have an
optional "migration_host" configuration parameter (useful when the host
has multiple network interfaces). If this is unspecified, libvirt de-
termines a name by looking up the target host's configured hostname.
There are a few scenarios where specifying migrateuri may help:
• The configured hostname is incorrect, or DNS is broken. If a host
has a hostname which will not resolve to match one of its public IP
addresses, then libvirt will generate an incorrect URI. In this case
migrateuri should be explicitly specified, using an IP address, or a
correct hostname.
• The host has multiple network interfaces. If a host has multiple
network interfaces, it might be desirable for the migration data
stream to be sent over a specific interface for either security or
performance reasons. In this case migrateuri should be explicitly
specified, using an IP address associated with the network to be
used.
• The firewall restricts what ports are available. When libvirt gener-
ates a migration URI, it will pick a port number using hypervisor
specific rules. Some hypervisors only require a single port to be
open in the firewalls, while others require a whole range of port
numbers. In the latter case migrateuri might be specified to choose
a specific port number outside the default range in order to comply
with local firewall policies.
• The desturi uses UNIX transport method. In this advanced case lib-
virt should not guess a migrateuri and it should be specified using
UNIX socket path URI:
unix:///path/to/socket
See https://libvirt.org/migration.html#uris for more details on migra-
tion URIs.
Optional graphicsuri overrides connection parameters used for automati-
cally reconnecting a graphical clients at the end of migration. If
omitted, libvirt will compute the parameters based on target host IP
address. In case the client does not have a direct access to the net-
work virtualization hosts are connected to and needs to connect through
a proxy, graphicsuri may be used to specify the address the client
should connect to. The URI is formed as follows:
protocol://hostname[:port]/[?parameters]
where protocol is either "spice" or "vnc" and parameters is a list of
protocol specific parameters separated by '&'. Currently recognized pa-
rameters are "tlsPort" and "tlsSubject". For example,
spice://target.host.com:1234/?tlsPort=4567
Optional listen-address sets the listen address that hypervisor on the
destination side should bind to for incoming migration. Both IPv4 and
IPv6 addresses are accepted as well as hostnames (the resolving is done
on destination). Some hypervisors do not support specifying the listen
address and will return an error if this parameter is used. This param-
eter cannot be used if desturi uses UNIX transport method.
Optional disks-port sets the port that hypervisor on destination side
should bind to for incoming disks traffic. Currently it is supported
only by QEMU.
Optional disks-uri can also be specified (mutually exclusive with
disks-port) to specify what the remote hypervisor should bind/connect
to when migrating disks. This can be tcp://address:port to specify a
listen address (which overrides --migrate-uri and --listen-address for
the disk migration) and a port or unix:///path/to/socket in case you
need the disk migration to happen over a UNIX socket with that speci-
fied path. In this case you need to make sure the same socket path is
accessible to both source and destination hypervisors and connecting to
the socket on the source (after hypervisor creates it on the destina-
tion) will actually connect to the destination. If you are using
SELinux (at least on the source host) you need to make sure the socket
on the source is accessible to libvirtd/QEMU for connection. Libvirt
cannot change the context of the existing socket because it is differ-
ent from the file representation of the socket and the context is cho-
sen by its creator (usually by using setsockcreatecon{,_raw}() func-
tions).
migrate-compcache
Syntax:
migrate-compcache domain [--size bytes]
Sets and/or gets size of the cache (in bytes) used for compressing re-
peatedly transferred memory pages during live migration. When called
without size, the command just prints current size of the compression
cache. When size is specified, the hypervisor is asked to change com-
pression cache to size bytes and then the current size is printed (the
result may differ from the requested size due to rounding done by the
hypervisor). The size option is supposed to be used while the domain is
being live-migrated as a reaction to migration progress and increasing
number of compression cache misses obtained from domjobinfo.
migrate-getmaxdowntime
Syntax:
migrate-getmaxdowntime domain
Get the maximum tolerable downtime for a domain which is being live-mi-
grated to another host. This is the number of milliseconds the guest
is allowed to be down at the end of live migration.
migrate-getspeed
Syntax:
migrate-getspeed domain [--postcopy]
Get the maximum migration bandwidth (in MiB/s) for a domain. If the
--postcopy option is specified, the command will get the maximum band-
width allowed during a post-copy migration phase.
migrate-postcopy
Syntax:
migrate-postcopy domain
Switch the current migration from pre-copy to post-copy. This is only
supported for a migration started with --postcopy option.
migrate-setmaxdowntime
Syntax:
migrate-setmaxdowntime domain downtime
Set maximum tolerable downtime for a domain which is being live-mi-
grated to another host. The downtime is a number of milliseconds the
guest is allowed to be down at the end of live migration.
migrate-setspeed
Syntax:
migrate-setspeed domain bandwidth [--postcopy]
Set the maximum migration bandwidth (in MiB/s) for a domain which is
being migrated to another host. bandwidth is interpreted as an unsigned
long long value. Specifying a negative value results in an essentially
unlimited value being provided to the hypervisor. The hypervisor can
choose whether to reject the value or convert it to the maximum value
allowed. If the --postcopy option is specified, the command will set
the maximum bandwidth allowed during a post-copy migration phase.
numatune
Syntax:
numatune domain [--mode mode] [--nodeset nodeset]
[[--config] [--live] | [--current]]
Set or get a domain's numa parameters, corresponding to the <numatune>
element of domain XML. Without flags, the current settings are dis-
played.
mode can be one of `strict', `interleave', `preferred' and 'restric-
tive' or any valid number from the virDomainNumatuneMemMode enum in
case the daemon supports it. For a running domain, the mode can't be
changed, and the nodeset can be changed only if the domain was started
with `restrictive' mode.
nodeset is a list of numa nodes used by the host for running the do-
main. Its syntax is a comma separated list, with '-' for ranges and
'^' for excluding a node.
If --live is specified, set scheduler information of a running guest.
If --config is specified, affect the next start of a persistent guest.
If --current is specified, it is equivalent to either --live or --con-
fig, depending on the current state of the guest.
For running guests in Linux hosts, the changes made in the domain's
numa parameters does not imply that the guest memory will be moved to a
different nodeset immediately. The memory migration depends on the
guest activity, and the memory of an idle guest will remain in its pre-
vious nodeset for longer. The presence of VFIO devices will also lock
parts of the guest memory in the same nodeset used to start the guest,
regardless of nodeset changes.
perf
Syntax:
perf domain [--enable eventSpec] [--disable eventSpec]
[[--config] [--live] | [--current]]
Get the current perf events setting or enable/disable specific perf
events for a guest domain.
Perf is a performance analyzing tool in Linux, and it can instrument
CPU performance counters, tracepoints, kprobes, and uprobes (dynamic
tracing). Perf supports a list of measurable events, and can measure
events coming from different sources. For instance, some event are pure
kernel counters, in this case they are called software events, includ-
ing context-switches, minor-faults, etc.. Now dozens of events from
different sources can be supported by perf.
Currently only QEMU/KVM supports this command. The --enable and --dis-
able option combined with eventSpec can be used to enable or disable
specific performance event. eventSpec is a string list of one or more
events separated by commas. Valid event names are as follows:
Valid perf event names
• cmt - A PQos (Platform Qos) feature to monitor the usage of cache by
applications running on the platform.
• mbmt - Provides a way to monitor the total system memory bandwidth
between one level of cache and another.
• mbml - Provides a way to limit the amount of data (bytes/s) send
through the memory controller on the socket.
• cache_misses - Provides the count of cache misses by applications
running on the platform.
• cache_references - Provides the count of cache hits by applications
running on th e platform.
• instructions - Provides the count of instructions executed by appli-
cations running on the platform.
• cpu_cycles - Provides the count of cpu cycles (total/elapsed). May be
used with instructions in order to get a cycles per instruction.
• branch_instructions - Provides the count of branch instructions exe-
cuted by applications running on the platform.
• branch_misses - Provides the count of branch misses executed by ap-
plications running on the platform.
• bus_cycles - Provides the count of bus cycles executed by applica-
tions running on the platform.
• stalled_cycles_frontend - Provides the count of stalled cpu cycles in
the frontend of the instruction processor pipeline by applications
running on the platform.
• stalled_cycles_backend - Provides the count of stalled cpu cycles in
the backend of the instruction processor pipeline by applications
running on the platform.
• ref_cpu_cycles - Provides the count of total cpu cycles not affected
by CPU frequency scaling by applications running on the platform.
• cpu_clock - Provides the cpu clock time consumed by applications run-
ning on the platform.
• task_clock - Provides the task clock time consumed by applications
running on the platform.
• page_faults - Provides the count of page faults by applications run-
ning on the platform.
• context_switches - Provides the count of context switches by applica-
tions running on the platform.
• cpu_migrations - Provides the count cpu migrations by applications
running on the platform.
• page_faults_min - Provides the count minor page faults by applica-
tions running on the platform.
• page_faults_maj - Provides the count major page faults by applica-
tions running on the platform.
• alignment_faults - Provides the count alignment faults by applica-
tions running on the platform.
• emulation_faults - Provides the count emulation faults by applica-
tions running on the platform.
Note: The statistics can be retrieved using the domstats command using
the --perf flag.
If --live is specified, affect a running guest. If --config is speci-
fied, affect the next start of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. If no flag is specified, behavior is
different depending on hypervisor.
reboot
Syntax:
reboot domain [--mode MODE-LIST]
Reboot a domain. This acts just as if the domain had the reboot com-
mand run from the console. The command returns as soon as it has exe-
cuted the reboot action, which may be significantly before the domain
actually reboots.
The exact behavior of a domain when it reboots is set by the on_reboot
parameter in the domain's XML definition.
By default the hypervisor will try to pick a suitable shutdown method.
To specify an alternative method, the --mode parameter can specify a
comma separated list which includes acpi, agent, initctl, signal and
paravirt. The order in which drivers will try each mode is undefined,
and not related to the order specified to virsh. For strict control
over ordering, use a single mode at a time and repeat the command.
reset
Syntax:
reset domain
Reset a domain immediately without any guest shutdown. reset emulates
the power reset button on a machine, where all guest hardware sees the
RST line set and reinitializes internal state.
Note: Reset without any guest OS shutdown risks data loss.
restore
Syntax:
restore state-file [--bypass-cache] [--xml file]
[{--running | --paused}] [--reset-nvram]
Restores a domain from a virsh save state file. See save for more info.
If --bypass-cache is specified, the restore will avoid the file system
cache, although this may slow down the operation.
--xml file is usually omitted, but can be used to supply an alternative
XML file for use on the restored guest with changes only in the
host-specific portions of the domain XML. For example, it can be used
to account for file naming differences in underlying storage due to
disk snapshots taken after the guest was saved.
Normally, restoring a saved image will use the state recorded in the
save image to decide between running or paused; passing either the
--running or --paused flag will allow overriding which state the domain
should be started in.
If --reset-nvram is specified, any existing NVRAM file will be deleted
and re-initialized from its pristine template.
Note: To avoid corrupting file system contents within the domain, you
should not reuse the saved state file for a second restore unless you
have also reverted all storage volumes back to the same contents as
when the state file was created.
resume
Syntax:
resume domain
Moves a domain out of the suspended state. This will allow a previ-
ously suspended domain to now be eligible for scheduling by the under-
lying hypervisor.
save
Syntax:
save domain state-file [--bypass-cache] [--xml file]
[{--running | --paused}] [--verbose]
Saves a running domain (RAM, but not disk state) to a state file so
that it can be restored later. Once saved, the domain will no longer
be running on the system, thus the memory allocated for the domain will
be free for other domains to use. virsh restore restores from this
state file. If --bypass-cache is specified, the save will avoid the
file system cache, although this may slow down the operation.
The progress may be monitored using domjobinfo virsh command and can-
celed with domjobabort command (sent by another virsh instance). An-
other option is to send SIGINT (usually with Ctrl-C) to the virsh
process running save command. --verbose displays the progress of save.
This is roughly equivalent to doing a hibernate on a running computer,
with all the same limitations. Open network connections may be severed
upon restore, as TCP timeouts may have expired.
--xml file is usually omitted, but can be used to supply an alternative
XML file for use on the restored guest with changes only in the
host-specific portions of the domain XML. For example, it can be used
to account for file naming differences that are planned to be made via
disk snapshots of underlying storage after the guest is saved.
Normally, restoring a saved image will decide between running or paused
based on the state the domain was in when the save was done; passing
either the --running or --paused flag will allow overriding which state
the restore should use.
Domain saved state files assume that disk images will be unchanged be-
tween the creation and restore point. For a more complete system re-
store point, where the disk state is saved alongside the memory state,
see the snapshot family of commands.
save-image-define
Syntax:
save-image-define file xml [{--running | --paused}]
Update the domain XML that will be used when file is later used in the
restore command. The xml argument must be a file name containing the
alternative XML, with changes only in the host-specific portions of the
domain XML. For example, it can be used to account for file naming
differences resulting from creating disk snapshots of underlying stor-
age after the guest was saved.
The save image records whether the domain should be restored to a run-
ning or paused state. Normally, this command does not alter the
recorded state; passing either the --running or --paused flag will al-
low overriding which state the restore should use.
save-image-dumpxml
Syntax:
save-image-dumpxml [--security-info] [--xpath EXPRESSION] [--wrap] file
Extract the domain XML that was in effect at the time the saved state
file file was created with the save command. Using --security-info
will also include security sensitive information.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
save-image-edit
Syntax:
save-image-edit file [{--running | --paused}]
Edit the XML configuration associated with a saved state file file cre-
ated by the save command.
The save image records whether the domain should be restored to a run-
ning or paused state. Normally, this command does not alter the
recorded state; passing either the --running or --paused flag will al-
low overriding which state the restore should use.
This is equivalent to:
virsh save-image-dumpxml state-file > state-file.xml
vi state-file.xml (or make changes with your other text editor)
virsh save-image-define state-file state-file-xml
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
schedinfo
Syntax:
schedinfo domain [[--config] [--live] | [--current]] [[--set] parameter=value]...
schedinfo [--weight number] [--cap number] domain
Allows you to show (and set) the domain scheduler parameters. The pa-
rameters available for each hypervisor are:
LXC (posix scheduler) : cpu_shares, vcpu_period, vcpu_quota
QEMU/KVM (posix scheduler): cpu_shares, vcpu_period, vcpu_quota, emula-
tor_period, emulator_quota, global_period, global_quota, iothread_pe-
riod, iothread_quota
Xen (credit scheduler): weight, cap
ESX (allocation scheduler): reservation, limit, shares
If --live is specified, set scheduler information of a running guest.
If --config is specified, affect the next start of a persistent guest.
If --current is specified, it is equivalent to either --live or --con-
fig, depending on the current state of the guest.
Note: The cpu_shares parameter has a valid value range of 2-262144.
Note: The weight and cap parameters are defined only for the XEN_CREDIT
scheduler.
Note: The vcpu_period, emulator_period, and iothread_period parameters
have a valid value range of 1000-1000000 or 0, and the vcpu_quota, emu-
lator_quota, and iothread_quota parameters have a valid value range of
1000-17592186044415 or less than 0. The value 0 for either parameter is
the same as not specifying that parameter.
screenshot
Syntax:
screenshot domain [imagefilepath] [--screen screenID]
Takes a screenshot of a current domain console and stores it into a
file. Optionally, if the hypervisor supports more displays for a do-
main, screenID allows specifying which screen will be captured. It is
the sequential number of screen. In case of multiple graphics cards,
heads are enumerated before devices, e.g. having two graphics cards,
both with four heads, screen ID 5 addresses the second head on the sec-
ond card.
send-key
Syntax:
send-key domain [--codeset codeset] [--holdtime holdtime] keycode...
Parse the keycode sequence as keystrokes to send to domain. Each key-
code can either be a numeric value or a symbolic name from the corre-
sponding codeset. If --holdtime is given, each keystroke will be held
for that many milliseconds. The default codeset is linux, but use of
the --codeset option allows other codesets to be chosen.
If multiple keycodes are specified, they are all sent simultaneously to
the guest, and they may be received in random order. If you need dis-
tinct keypresses, you must use multiple send-key invocations.
• linux
The numeric values are those defined by the Linux generic input event
subsystem. The symbolic names match the corresponding Linux key con-
stant macro names.
See virkeycode-linux(7) and virkeyname-linux(7)
• xt
The numeric values are those defined by the original XT keyboard con-
troller. No symbolic names are provided
See virkeycode-xt(7)
• atset1
The numeric values are those defined by the AT keyboard controller,
set 1 (aka XT compatible set). Extended keycoes from atset1 may dif-
fer from extended keycodes in the xt codeset. No symbolic names are
provided
See virkeycode-atset1(7)
• atset2
The numeric values are those defined by the AT keyboard controller,
set 2. No symbolic names are provided
See virkeycode-atset2(7)
• atset3
The numeric values are those defined by the AT keyboard controller,
set 3 (aka PS/2 compatible set). No symbolic names are provided
See virkeycode-atset3(7)
• os_x
The numeric values are those defined by the macOS keyboard input sub-
system. The symbolic names match the corresponding macOS key constant
macro names
See virkeycode-osx(7) and virkeyname-osx(7)
• xt_kbd
The numeric values are those defined by the Linux KBD device. These
are a variant on the original XT codeset, but often with different
encoding for extended keycodes. No symbolic names are provided.
See virkeycode-xtkbd(7)
• win32
The numeric values are those defined by the Win32 keyboard input sub-
system. The symbolic names match the corresponding Win32 key constant
macro names
See virkeycode-win32(7) and virkeyname-win32(7)
• usb
The numeric values are those defined by the USB HID specification for
keyboard input. No symbolic names are provided
See virkeycode-usb(7)
• qnum
The numeric values are those defined by the QNUM extension for send-
ing raw keycodes. These are a variant on the XT codeset, but extended
keycodes have the low bit of the second byte set, instead of the high
bit of the first byte. No symbolic names are provided.
See virkeycode-qnum(7)
Examples:
# send three strokes 'k', 'e', 'y', using xt codeset. these
# are all pressed simultaneously and may be received by the guest
# in random order
virsh send-key dom --codeset xt 37 18 21
# send one stroke 'right-ctrl+C'
virsh send-key dom KEY_RIGHTCTRL KEY_C
# send a tab, held for 1 second
virsh send-key --holdtime 1000 0xf
send-process-signal
Syntax:
send-process-signal domain-id pid signame
Send a signal signame to the process identified by pid running in the
virtual domain domain-id. The pid is a process ID in the virtual domain
namespace.
The signame argument may be either an integer signal constant number,
or one of the symbolic names:
"nop", "hup", "int", "quit", "ill",
"trap", "abrt", "bus", "fpe", "kill",
"usr1", "segv", "usr2", "pipe", "alrm",
"term", "stkflt", "chld", "cont", "stop",
"tstp", "ttin", "ttou", "urg", "xcpu",
"xfsz", "vtalrm", "prof", "winch", "poll",
"pwr", "sys", "rt0", "rt1", "rt2", "rt3",
"rt4", "rt5", "rt6", "rt7", "rt8", "rt9",
"rt10", "rt11", "rt12", "rt13", "rt14", "rt15",
"rt16", "rt17", "rt18", "rt19", "rt20", "rt21",
"rt22", "rt23", "rt24", "rt25", "rt26", "rt27",
"rt28", "rt29", "rt30", "rt31", "rt32"
The symbol name may optionally be prefixed with sig or sig_ and may be
in uppercase or lowercase.
Examples:
virsh send-process-signal myguest 1 15
virsh send-process-signal myguest 1 term
virsh send-process-signal myguest 1 sigterm
virsh send-process-signal myguest 1 SIG_HUP
set-lifecycle-action
Syntax:
set-lifecycle-action domain type action
[[--config] [--live] | [--current]]
Set the lifecycle action for specified lifecycle type. The valid types
are "poweroff", "reboot" and "crash", and for each of them valid action
is one of "destroy", "restart", "rename-restart", "preserve". For type
"crash", additional actions "coredump-destroy" and "coredump-restart"
are supported.
set-user-password
Syntax:
set-user-password domain user password [--encrypted]
Set the password for the user account in the guest domain.
If --encrypted is specified, the password is assumed to be already en-
crypted by the method required by the guest OS.
For QEMU/KVM, this requires the guest agent to be configured and run-
ning.
set-user-sshkeys
Syntax:
set-user-sshkeys domain user [--file FILE] [{--reset | --remove}]
Append keys read from FILE into user's SSH authorized keys file in the
guest domain. In the FILE keys must be on separate lines and each line
must follow authorized keys format as defined by sshd(8).
If --reset is specified, then the guest authorized keys file content is
removed before appending new keys. As a special case, if --reset is
provided and no FILE was provided then no new keys are added and the
authorized keys file is cleared out.
If --remove is specified, then instead of adding any new keys then keys
read from FILE are removed from the authorized keys file. It is not
considered an error if the key does not exist in the file.
setmaxmem
Syntax:
setmaxmem domain size [[--config] [--live] | [--current]]
Change the maximum memory allocation limit for a guest domain. If
--live is specified, affect a running guest. If --config is specified,
affect the next start of a persistent guest. If --current is speci-
fied, it is equivalent to either --live or --config, depending on the
current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. If no flag is specified, behavior is
different depending on hypervisor.
Some hypervisors such as QEMU/KVM don't support live changes (espe-
cially increasing) of the maximum memory limit. Even persistent con-
figuration changes might not be performed with some hypervisors/config-
uration (e.g. on NUMA enabled domains on QEMU). For complex configura-
tion changes use command edit instead).
size is a scaled integer (see NOTES above); it defaults to kibibytes
(blocks of 1024 bytes) unless you provide a suffix (and the older op-
tion name --kilobytes is available as a deprecated synonym) . Libvirt
rounds up to the nearest kibibyte. Some hypervisors require a larger
granularity than KiB, and requests that are not an even multiple will
be rounded up. For example, vSphere/ESX rounds the parameter up to
mebibytes (1024 kibibytes).
setmem
Syntax:
setmem domain size [[--config] [--live] | [--current]]
Change the memory allocation for a guest domain. If --live is speci-
fied, perform a memory balloon of a running guest. If --config is
specified, affect the next start of a persistent guest. If --current
is specified, it is equivalent to either --live or --config, depending
on the current state of the guest. Both --live and --config flags may
be given, but --current is exclusive. If no flag is specified, behavior
is different depending on hypervisor.
size is a scaled integer (see NOTES above); it defaults to kibibytes
(blocks of 1024 bytes) unless you provide a suffix (and the older op-
tion name --kilobytes is available as a deprecated synonym) . Libvirt
rounds up to the nearest kibibyte. Some hypervisors require a larger
granularity than KiB, and requests that are not an even multiple will
be rounded up. For example, vSphere/ESX rounds the parameter up to
mebibytes (1024 kibibytes).
For Xen, you can only adjust the memory of a running domain if the do-
main is paravirtualized or running the PV balloon driver.
For LXC, the value being set is the cgroups value for limit_in_bytes or
the maximum amount of user memory (including file cache). When viewing
memory inside the container, this is the /proc/meminfo "MemTotal"
value. When viewing the value from the host, use the virsh memtune com-
mand. In order to view the current memory in use and the maximum value
allowed to set memory, use the virsh dominfo command.
setvcpus
Syntax:
setvcpus domain count [--maximum] [[--config] [--live] | [--current]] [--guest] [--hotpluggable]
Change the number of virtual CPUs active in a guest domain. By de-
fault, this command works on active guest domains. To change the set-
tings for an inactive guest domain, use the --config flag.
The count value may be limited by host, hypervisor, or a limit coming
from the original description of the guest domain. For Xen, you can
only adjust the virtual CPUs of a running domain if the domain is par-
avirtualized.
If the --config flag is specified, the change is made to the stored XML
configuration for the guest domain, and will only take effect when the
guest domain is next started.
If --live is specified, the guest domain must be active, and the change
takes place immediately. Both the --config and --live flags may be
specified together if supported by the hypervisor. If this command is
run before the guest has finished booting, the guest may fail to
process the change.
If --current is specified, it is equivalent to either --live or --con-
fig, depending on the current state of the guest.
When no flags are given, the --live flag is assumed and the guest do-
main must be active. In this situation it is up to the hypervisor
whether the --config flag is also assumed, and therefore whether the
XML configuration is adjusted to make the change persistent.
If --guest is specified, then the count of cpus is modified in the
guest instead of the hypervisor. This flag is usable only for live do-
mains and may require guest agent to be configured in the guest.
To allow adding vcpus to persistent definitions that can be later ho-
tunplugged after the domain is booted it is necessary to specify the
--hotpluggable flag. Vcpus added to live domains supporting vcpu unplug
are automatically marked as hotpluggable.
The --maximum flag controls the maximum number of virtual cpus that can
be hot-plugged the next time the domain is booted. As such, it must
only be used with the --config flag, and not with the --live or the
--current flag. Note that it may not be possible to change the maximum
vcpu count if the processor topology is specified for the guest.
setvcpu
Syntax:
setvcpu domain vcpulist [--enable] | [--disable]
[[--live] [--config] | [--current]]
Change state of individual vCPUs using hot(un)plug mechanism.
See vcpupin for information on format of vcpulist. Hypervisor drivers
may require that vcpulist contains exactly vCPUs belonging to one hot-
pluggable entity. This is usually just a single vCPU but certain archi-
tectures such as ppc64 require a full core to be specified at once.
Note that hypervisors may refuse to disable certain vcpus such as vcpu
0 or others.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. This is the default. Both --live and
--config flags may be given, but --current is exclusive.
shutdown
Syntax:
shutdown domain [--mode MODE-LIST]
Gracefully shuts down a domain. This coordinates with the domain OS to
perform graceful shutdown, so there is no guarantee that it will suc-
ceed, and may take a variable length of time depending on what services
must be shutdown in the domain.
The exact behavior of a domain when it shuts down is set by the
on_poweroff parameter in the domain's XML definition.
If domain is transient, then the metadata of any snapshots and check-
points will be lost once the guest stops running, but the underlying
contents still exist, and a new domain with the same name and UUID can
restore the snapshot metadata with snapshot-create, and the checkpoint
metadata with checkpoint-create.
By default the hypervisor will try to pick a suitable shutdown method.
To specify an alternative method, the --mode parameter can specify a
comma separated list which includes acpi, agent, initctl, signal and
paravirt. The order in which drivers will try each mode is undefined,
and not related to the order specified to virsh. For strict control
over ordering, use a single mode at a time and repeat the command.
start
Syntax:
start domain-name-or-uuid [--console] [--paused]
[--autodestroy] [--bypass-cache] [--force-boot]
[--pass-fds N,M,...] [--reset-nvram]
Start a (previously defined) inactive domain, either from the last man-
agedsave state, or via a fresh boot if no managedsave state is present.
The domain will be paused if the --paused option is used and supported
by the driver; otherwise it will be running. If --console is re-
quested, attach to the console after creation. If --autodestroy is re-
quested, then the guest will be automatically destroyed when virsh
closes its connection to libvirt, or otherwise exits. If --by-
pass-cache is specified, and managedsave state exists, the restore will
avoid the file system cache, although this may slow down the operation.
If --force-boot is specified, then any managedsave state is discarded
and a fresh boot occurs.
If --pass-fds is specified, the argument is a comma separated list of
open file descriptors which should be pass on into the guest. The file
descriptors will be re-numbered in the guest, starting from 3. This is
only supported with container based virtualization.
If --reset-nvram is specified, any existing NVRAM file will be deleted
and re-initialized from its pristine template.
suspend
Syntax:
suspend domain
Suspend a running domain. It is kept in memory but won't be scheduled
anymore.
ttyconsole
Syntax:
ttyconsole domain
Output the device used for the TTY console of the domain. If the infor-
mation is not available the processes will provide an exit code of 1.
undefine
Syntax:
undefine domain [--managed-save] [--snapshots-metadata]
[--checkpoints-metadata] [--nvram] [--keep-nvram]
[ {--storage volumes | --remove-all-storage
[--delete-storage-volume-snapshots]} --wipe-storage]
[--tpm] [--keep-tpm]
Undefine a domain. If the domain is running, this converts it to a
transient domain, without stopping it. If the domain is inactive, the
domain configuration is removed.
The --managed-save flag guarantees that any managed save image (see the
managedsave command) is also cleaned up. Without the flag, attempts to
undefine a domain with a managed save image will fail.
The --snapshots-metadata flag guarantees that any snapshots (see the
snapshot-list command) are also cleaned up when undefining an inactive
domain. Without the flag, attempts to undefine an inactive domain with
snapshot metadata will fail. If the domain is active, this flag is ig-
nored.
The --checkpoints-metadata flag guarantees that any checkpoints (see
the checkpoint-list command) are also cleaned up when undefining an in-
active domain. Without the flag, attempts to undefine an inactive do-
main with checkpoint metadata will fail. If the domain is active, this
flag is ignored.
--nvram and --keep-nvram specify accordingly to delete or keep nvram
(/domain/os/nvram/) file. If the domain has an nvram file and the flags
are omitted, the undefine will fail.
The --storage flag takes a parameter volumes, which is a comma sepa-
rated list of volume target names or source paths of storage volumes to
be removed along with the undefined domain. Volumes can be undefined
and thus removed only on inactive domains. Volume deletion is only at-
tempted after the domain is undefined; if not all of the requested vol-
umes could be deleted, the error message indicates what still remains
behind. If a volume path is not found in the domain definition, it's
treated as if the volume was successfully deleted. Only volumes managed
by libvirt in storage pools can be removed this way. (See domblklist
for list of target names associated to a domain). Example: --storage
vda,/path/to/storage.img
The --remove-all-storage flag specifies that all of the domain's stor-
age volumes should be deleted.
The --delete-storage-volume-snapshots (previously --delete-snapshots)
flag specifies that any snapshots associated with the storage volume
should be deleted as well. Requires the --remove-all-storage flag to be
provided. Not all storage drivers support this option, presently only
rbd. Using this when also removing volumes handled by a storage driver
which does not support the flag will result in failure.
The flag --wipe-storage specifies that the storage volumes should be
wiped before removal.
--tpm and --keep-tpm specify accordingly to delete or keep a TPM's per-
sistent state directory structure and files. If the flags are omitted
then the persistent_state attribute in the TPM emulator definition in
the domain XML determines whether the TPM state is kept.
NOTE: For an inactive domain, the domain name or UUID must be used as
the domain.
vcpucount
Syntax:
vcpucount domain [{--maximum | --active}
{--config | --live | --current}] [--guest]
Print information about the virtual cpu counts of the given domain. If
no flags are specified, all possible counts are listed in a table; oth-
erwise, the output is limited to just the numeric value requested. For
historical reasons, the table lists the label "current" on the rows
that can be queried in isolation via the --active flag, rather than re-
lating to the --current flag.
--maximum requests information on the maximum cap of vcpus that a do-
main can add via setvcpus, while --active shows the current usage;
these two flags cannot both be specified. --config requires a persis-
tent guest and requests information regarding the next time the domain
will be booted, --live requires a running domain and lists current val-
ues, and --current queries according to the current state of the domain
(corresponding to --live if running, or --config if inactive); these
three flags are mutually exclusive.
If --guest is specified, then the count of cpus is reported from the
perspective of the guest. This flag is usable only for live domains and
may require guest agent to be configured in the guest.
vcpuinfo
Syntax:
vcpuinfo domain [--pretty]
Returns basic information about the domain virtual CPUs, like the num-
ber of vCPUs, the running time, the affinity to physical processors.
With --pretty, cpu affinities are shown as ranges.
Example:
$ virsh vcpuinfo fedora
VCPU: 0
CPU: 0
State: running
CPU time: 7,0s
CPU Affinity: yyyy
VCPU: 1
CPU: 1
State: running
CPU time: 0,7s
CPU Affinity: yyyy
STATES
The State field displays the current operating state of a virtual CPU
• offline
The virtual CPU is offline and not usable by the domain. This state
is not supported by all hypervisors.
• running
The virtual CPU is available to the domain and is operating.
• blocked
The virtual CPU is available to the domain but is waiting for a re-
source. This state is not supported by all hypervisors, in which
case running may be reported instead.
• no state
The virtual CPU state could not be determined. This could happen if
the hypervisor is newer than virsh.
• N/A
There's no information about the virtual CPU state available. This
can be the case if the domain is not running or the hypervisor does
not report the virtual CPU state.
vcpupin
Syntax:
vcpupin domain [vcpu] [cpulist] [[--live] [--config] | [--current]]
Query or change the pinning of domain VCPUs to host physical CPUs. To
pin a single vcpu, specify cpulist; otherwise, you can query one vcpu
or omit vcpu to list all at once.
cpulist is a list of physical CPU numbers. Its syntax is a comma sepa-
rated list and a special markup using '-' and '^' (ex. '0-4', '0-3,^2')
can also be allowed. The '-' denotes the range and the '^' denotes ex-
clusive. For pinning the vcpu to all physical cpus specify 'r' as a
cpulist. If --live is specified, affect a running guest. If --config
is specified, affect the next start of a persistent guest. If --cur-
rent is specified, it is equivalent to either --live or --config, de-
pending on the current state of the guest. Both --live and --config
flags may be given if cpulist is present, but --current is exclusive.
If no flag is specified, behavior is different depending on hypervisor.
Note: The expression is sequentially evaluated, so "0-15,^8" is identi-
cal to "9-14,0-7,15" but not identical to "^8,0-15".
vncdisplay
Syntax:
vncdisplay domain
Output the IP address and port number for the VNC display. If the in-
formation is not available the processes will provide an exit code of
1.
DEVICE COMMANDS
The following commands manipulate devices associated to domains. The
domain can be specified as a short integer, a name or a full UUID. To
better understand the values allowed as options for the command reading
the documentation at https://libvirt.org/formatdomain.html on the for-
mat of the device sections to get the most accurate set of accepted
values.
attach-device
Syntax:
attach-device domain FILE [[[--live] [--config] | [--current]] | [--persistent]]
Attach a device to the domain, using a device definition in an XML file
using a device definition element such as <disk> or <interface> as the
top-level element. See the documentation at
https://libvirt.org/formatdomain.html#elementsDevices to learn about
libvirt XML format for a device. If --config is specified the command
alters the persistent guest configuration with the device attach taking
effect the next time libvirt starts the domain. For cdrom and floppy
devices, this command only replaces the media within an existing de-
vice; consider using update-device for this usage. For passthrough
host devices, see also nodedev-detach, needed if the PCI device does
not use managed mode.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. When no flag is specified legacy API
is used whose behavior depends on the hypervisor driver.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain.
Note: using of partial device definition XML files may lead to unex-
pected results as some fields may be autogenerated and thus match de-
vices other than expected.
attach-disk
Syntax:
attach-disk domain source target [[[--live] [--config] |
[--current]] | [--persistent]] [--targetbus bus]
[--driver driver] [--subdriver subdriver] [--iothread iothread]
[--cache cache] [--io io] [--type type] [--alias alias]
[--mode mode] [--sourcetype sourcetype]
[--source-protocol protocol] [--source-host-name hostname:port]
[--source-host-transport transport] [--source-host-socket socket]
[--serial serial] [--wwn wwn] [--rawio] [--address address]
[--multifunction] [--print-xml]
Attach a new disk device to the domain. source is path for the files
and devices unless --source-protocol is specified, in which case source
is the name of a network disk. target controls the bus or device under
which the disk is exposed to the guest OS. It indicates the "logical"
device name; the optional targetbus attribute specifies the type of
disk device to emulate; possible values are driver specific, with typi-
cal values being ide, scsi, virtio, xen, usb, sata, or sd, if omitted,
the bus type is inferred from the style of the device name (e.g. a de-
vice named 'sda' will typically be exported using a SCSI bus). driver
can be file, tap or phy for the Xen hypervisor depending on the kind of
access; or qemu for the QEMU emulator. Further details to the driver
can be passed using subdriver. For Xen subdriver can be aio, while for
QEMU subdriver should match the format of the disk source, such as raw
or qcow2. Hypervisor default will be used if subdriver is not speci-
fied. However, the default may not be correct, esp. for QEMU as for
security reasons it is configured not to detect disk formats. type can
indicate lun, cdrom or floppy as alternative to the disk default, al-
though this use only replaces the media within the existing virtual
cdrom or floppy device; consider using update-device for this usage in-
stead. alias can set user supplied alias. mode can specify the two
specific mode readonly or shareable. sourcetype can indicate the type
of source (block|file|network) cache can be one of "default", "none",
"writethrough", "writeback", "directsync" or "unsafe". io controls
specific policies on I/O; QEMU guests support "threads", "native" and
"io_uring". iothread is the number within the range of domain IO-
Threads to which this disk may be attached (QEMU only). serial is the
serial of disk device. wwn is the wwn of disk device. rawio indicates
the disk needs rawio capability. address is the address of disk device
in the form of pci:domain.bus.slot.function, scsi:controller.bus.unit,
ide:controller.bus.unit, usb:bus.port, sata:controller.bus.unit or
ccw:cssid.ssid.devno. Virtio-ccw devices must have their cssid set to
0xfe. multifunction indicates specified pci address is a multifunction
pci device address.
There is also support for using a network disk. As specified, the user
can provide a --source-protocol in which case the source parameter will
be interpreted as the source name. --source-protocol must be provided
if the user intends to provide a network disk or host information.
Host information can be provided using the tags --source-host-name,
--source-host-transport, and --source-host-socket, which respectively
denote the name of the host, the host's transport method, and the
socket that the host uses. --source-host-socket and --source-host-name
cannot both be provided, and the user must provide a
--source-host-transport if they want to provide a --source-host-socket.
The --source-host-name parameter supports host:port syntax if the user
wants to provide a port as well.
If --print-xml is specified, then the XML of the disk that would be at-
tached is printed instead.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. When no flag is specified legacy API
is used whose behavior depends on the hypervisor driver.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain. Like-
wise, --shareable is an alias for --mode shareable.
attach-interface
Syntax:
attach-interface domain type source [[[--live]
[--config] | [--current]] | [--persistent]]
[--target target] [--mac mac] [--script script] [--model model]
[--inbound average,peak,burst,floor] [--outbound average,peak,burst]
[--alias alias] [--managed] [--print-xml]
[--source-mode mode]
Attach a new network interface to the domain.
type can be one of the:
network to indicate connection via a libvirt virtual network,
bridge to indicate connection via a bridge device on the host,
direct to indicate connection directly to one of the host's network in-
terfaces or bridges,
hostdev to indicate connection using a passthrough of PCI device on the
host,
vhostuser to indicate connection using a virtio transport protocol.
source indicates the source of the connection. The source depends on
the type of the interface:
network name of the virtual network,
bridge the name of the bridge device,
direct the name of the host's interface or bridge,
hostdev the PCI address of the host's interface formatted as do-
main:bus:slot.function.
vhostuser the path to UNIX socket (control plane)
--target is used to specify the tap/macvtap device to be used to con-
nect the domain to the source. Names starting with 'vnet' are consid-
ered as auto-generated and are blanked out/regenerated each time the
interface is attached.
--mac specifies the MAC address of the network interface; if a MAC ad-
dress is not given, a new address will be automatically generated (and
stored in the persistent configuration if "--config" is given on the
command line).
--script is used to specify a path to a custom script to be called
while attaching to a bridge - this will be called instead of the de-
fault script not in addition to it. This is valid only for interfaces
of bridge type and only for Xen domains.
--model specifies the network device model to be presented to the do-
main.
alias can set user supplied alias.
--inbound and --outbound control the bandwidth of the interface. At
least one from the average, floor pair must be specified. The other
two peak and burst are optional, so "average,peak", "average,,burst",
"average,,,floor", "average" and ",,,floor" are also legal. Values for
average, floor and peak are expressed in kilobytes per second, while
burst is expressed in kilobytes in a single burst at peak speed as de-
scribed in the Network XML documentation at
https://libvirt.org/formatnetwork.html#quality-of-service.
--managed is usable only for hostdev type and tells libvirt that the
interface should be managed, which means detached and reattached
from/to the host by libvirt.
--source-mode is mandatory for vhostuser interface and accepts values
server and client that control whether hypervisor waits for the other
process to connect, or initiates connection, respectively.
If --print-xml is specified, then the XML of the interface that would
be attached is printed instead.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, affect the current domain state, which can either be live or
offline. Both --live and --config flags may be given, but --current is
exclusive. When no flag is specified legacy API is used whose behavior
depends on the hypervisor driver.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain.
Note: the optional target value is the name of a device to be created
as the back-end on the node. If not provided a device named "vnetN" or
"vifN" will be created automatically.
detach-device
Syntax:
detach-device domain FILE [[[--live] [--config] |
[--current]] | [--persistent]]
Detach a device from the domain, takes the same kind of XML descrip-
tions as command attach-device. For passthrough host devices, see also
nodedev-reattach, needed if the device does not use managed mode.
Note: The supplied XML description of the device should be as specific
as its definition in the domain XML. The set of attributes used to
match the device are internal to the drivers. Using a partial defini-
tion, or attempting to detach a device that is not present in the do-
main XML, but shares some specific attributes with one that is present,
may lead to unexpected results.
Quirk: Device unplug is asynchronous in most cases and requires guest
cooperation. This means that it's up to the discretion of the guest to
disallow or delay the unplug arbitrarily. As the libvirt API used in
this command was designed as synchronous it returns success after some
timeout even if the device was not unplugged yet to allow further in-
teractions with the domain e.g. if the guest is unresponsive. Callers
which need to make sure that the device was unplugged can use libvirt
events (see virsh event) to be notified when the device is removed.
Note that the event may arrive before the command returns.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. When no flag is specified legacy API
is used whose behavior depends on the hypervisor driver.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain.
Note that older versions of virsh used --config as an alias for --per-
sistent.
detach-device-alias
Syntax:
detach-device-alias domain alias [[[--live] [--config] | [--current]]]]
Detach a device with given alias from the domain. This command returns
successfully after the unplug request was sent to the hypervisor. The
actual removal of the device is notified asynchronously via libvirt
events (see virsh event).
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive.
detach-disk
Syntax:
detach-disk domain target [[[--live] [--config] |
[--current]] | [--persistent]] [--print-xml]
Detach a disk device from a domain. The target is the device as seen
from the domain.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. When no flag is specified legacy API
is used whose behavior depends on the hypervisor driver.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain.
Note that older versions of virsh used --config as an alias for --per-
sistent.
If --print-xml is specified, then the XML which would be used to detach
the disk is printed instead.
Please see documentation for detach-device for known quirks.
detach-interface
Syntax:
detach-interface domain type [--mac mac]
[[[--live] [--config] | [--current]] | [--persistent]] [--print-xml]
Detach a network interface from a domain. type can be either network
to indicate a physical network device or bridge to indicate a bridge to
a device. It is recommended to use the mac option to distinguish be-
tween the interfaces if more than one are present on the domain.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. When no flag is specified legacy API
is used whose behavior depends on the hypervisor driver.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain.
Note that older versions of virsh used --config as an alias for --per-
sistent.
If --print-xml is specified, then the XML used to detach the interface
is printed instead.
Please see documentation for detach-device for known quirks.
update-device
Syntax:
update-device domain file [--force] [[[--live]
[--config] | [--current]] | [--persistent]]
Update the characteristics of a device associated with domain, based on
the device definition in an XML file. The --force option can be used
to force device update, e.g., to eject a CD-ROM even if it is
locked/mounted in the domain. See the documentation at
https://libvirt.org/formatdomain.html#elementsDevices to learn about
libvirt XML format for a device.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. Not specifying any flag is the same
as specifying --current.
For compatibility purposes, --persistent behaves like --config for an
offline domain, and like --live --config for a running domain.
Note that older versions of virsh used --config as an alias for --per-
sistent.
Note: using of partial device definition XML files may lead to unex-
pected results as some fields may be autogenerated and thus match de-
vices other than expected.
update-memory-device
Syntax:
update-memory-device domain [--print-xml] [[--alias alias] | [--node node]]
[[--live] [--config] | [--current]]
[--requested-size size]
This command finds <memory/> device inside given domain, changes re-
quested values and passes updated device XML to daemon. If --print-xml
is specified then the device is not changed, but the updated device XML
is printed to stdout. If there are more than one <memory/> devices in
domain use --alias or --node to select the desired one.
If --live is specified, affect a running domain. If --config is speci-
fied, affect the next startup of a persistent guest. If --current is
specified, it is equivalent to either --live or --config, depending on
the current state of the guest. Both --live and --config flags may be
given, but --current is exclusive. Not specifying any flag is the same
as specifying --current.
If --requested-size is specified then <requested/> under memory target
is changed to requested size (as scaled integer, see NOTES above). It
defaults to kibibytes if no suffix is provided. The option is valid
only for virtio-mem memory device model.
change-media
Syntax:
change-media domain path [--eject] [--insert]
[--update] [source] [--force] [[--live] [--config] |
[--current]] [--print-xml] [--block]
Change media of CDROM or floppy drive. path can be the fully-qualified
path or the unique target name (<target dev='hdc'>) of the disk device.
source specifies the path of the media to be inserted or updated. The
--block flag allows setting the backing type in case a block device is
used as media for the CDROM or floppy drive instead of a file.
--eject indicates the media will be ejected. --insert indicates the
media will be inserted. source must be specified. If the device has
source (e.g. <source file='media'>), and source is not specified, --up-
date is equal to --eject. If the device has no source, and source is
specified, --update is equal to --insert. If the device has source, and
source is specified, --update behaves like combination of --eject and
--insert. If none of --eject, --insert, and --update is specified,
--update is used by default. The --force option can be used to force
media changing. If --live is specified, alter live configuration of
running guest. If --config is specified, alter persistent configura-
tion, effect observed on next startup of the guest. --current can be
either or both of live and config, depends on the hypervisor's imple-
mentation. Both --live and --config flags may be given, but --current
is exclusive. If no flag is specified, behavior is different depending
on hypervisor. If --print-xml is specified, the XML that would be used
to change media is printed instead of changing the media.
dom-fd-associate
Syntax:
dom-fd-associate domain --name FDGROUPNAME --pass-fds M,N,....
[--seclabel-writable] [--seclabel-restore]
Associate one or more fds described via --pass-fds argument to domain
as --name. The lifetime of the passed fd group is the same as the con-
nection, thus exitting virsh un-registers them afterwards.
By default security labels are applied if needed but they are not re-
stored after use to avoid keeping them open unnecessarily. Best-effort
security label restore may be requested by using the --seclabel-restore
flag.
NODEDEV COMMANDS
The following commands manipulate host devices that are intended to be
passed through to guest domains via <hostdev> elements in a domain's
<devices> section. A node device key is generally specified by the bus
name followed by its address, using underscores between all components,
such as pci_0000_00_02_1, usb_1_5_3, or net_eth1_00_27_13_6a_fe_00.
The nodedev-list gives the full list of host devices that are known to
libvirt, although this includes devices that cannot be assigned to a
guest (for example, attempting to detach the PCI device that controls
the host's hard disk controller where the guest's disk images live
could cause the host system to lock up or reboot).
For more information on node device definition see:
https://libvirt.org/formatnode.html.
Passthrough devices cannot be simultaneously used by the host and its
guest domains, nor by multiple active guests at once. If the <hostdev>
description of a PCI device includes the attribute managed='yes', and
the hypervisor driver supports it, then the device is in managed mode,
and attempts to use that passthrough device in an active guest will au-
tomatically behave as if nodedev-detach (guest start, device hot-plug)
and nodedev-reattach (guest stop, device hot-unplug) were called at the
right points. If a PCI device is not marked as managed, then it must
manually be detached before guests can use it, and manually reattached
to be returned to the host. Also, if a device is manually detached,
then the host does not regain control of the device without a matching
reattach, even if the guests use the device in managed mode.
nodedev-create
Syntax:
nodedev-create FILE [--validate]
Create a device on the host node that can then be assigned to virtual
machines. Normally, libvirt is able to automatically determine which
host nodes are available for use, but this allows registration of host
hardware that libvirt did not automatically detect. file contains xml
for a top-level <device> description of a node device.
If --validate is specified, validates the format of the XML document
against an internal RNG schema.
nodedev-destroy
Syntax:
nodedev-destroy device
Destroy (stop) a device on the host. device can be either device name
or wwn pair in "wwnn,wwpn" format (only works for vHBA currently).
Note that this makes libvirt quit managing a host device, and may even
make that device unusable by the rest of the physical host until a re-
boot.
nodedev-define
Syntax:
nodedev-define FILE [--validate]
Define an inactive persistent device or modify an existing persistent
one from the XML FILE.
If --validate is specified, validates the format of the XML document
against an internal RNG schema.
nodedev-undefine
Syntax:
nodedev-undefine device
Undefine the configuration for a persistent device. If the device is
active, make it transient.
nodedev-start
Syntax:
nodedev-start device
Start a (previously defined) inactive device.
nodedev-detach
Syntax:
nodedev-detach nodedev [--driver backend_driver]
Detach nodedev from the host, so that it can safely be used by guests
via <hostdev> passthrough. This is reversed with nodedev-reattach, and
is done automatically for managed devices.
Different backend drivers expect the device to be bound to different
dummy devices. For example, QEMU's "vfio" backend driver expects the
device to be bound to vfio-pci. The --driver parameter can be used to
specify the desired backend driver.
nodedev-dumpxml
Syntax:
nodedev-dumpxml [--xpath EXPRESSION] [--wrap] device
Dump a <device> XML representation for the given node device, including
such information as the device name, which bus owns the device, the
vendor and product id, and any capabilities of the device usable by
libvirt (such as whether device reset is supported). device can be ei-
ther device name or wwn pair in "wwnn,wwpn" format (only works for
HBA).
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
nodedev-info
Syntax:
nodedev-info device
Returns basic information about the device object.
nodedev-list
Syntax:
nodedev-list [--cap capability] [--tree] [--inactive | --all]
List all of the devices available on the node that are known by lib-
virt. cap is used to filter the list by capability types, the types
must be separated by comma, e.g. --cap pci,scsi. Valid capability types
include 'system', 'pci', 'usb_device', 'usb', 'net', 'scsi_host',
'scsi_target', 'scsi', 'storage', 'fc_host', 'vports', 'scsi_generic',
'drm', 'mdev', 'mdev_types', 'ccw', 'css', 'ap_card', 'ap_queue',
'ap_matrix'. By default, only active devices are listed. --inactive is
used to list only inactive devices, and -all is used to list both ac-
tive and inactive devices. If --tree is used, the output is formatted
in a tree representing parents of each node. --tree is mutually exclu-
sive with all other options.
nodedev-reattach
Syntax:
nodedev-reattach nodedev
Declare that nodedev is no longer in use by any guests, and that the
host can resume normal use of the device. This is done automatically
for PCI devices in managed mode and USB devices, but must be done ex-
plicitly to match any explicit nodedev-detach.
nodedev-reset
Syntax:
nodedev-reset nodedev
Trigger a device reset for nodedev, useful prior to transferring a node
device between guest passthrough or the host. Libvirt will often do
this action implicitly when required, but this command allows an ex-
plicit reset when needed.
nodedev-event
Syntax:
nodedev-event {[nodedev] event [--loop] [--timeout seconds] [--timestamp] | --list}
Wait for a class of node device events to occur, and print appropriate
details of events as they happen. The events can optionally be fil-
tered by nodedev. Using --list as the only argument will provide a
list of possible event values known by this client, although the con-
nection might not allow registering for all these events.
By default, this command is one-shot, and returns success once an event
occurs; you can send SIGINT (usually via Ctrl-C) to quit immediately.
If --timeout is specified, the command gives up waiting for events af-
ter seconds have elapsed. With --loop, the command prints all events
until a timeout or interrupt key.
When --timestamp is used, a human-readable timestamp will be printed
before the event.
nodedev-autostart
Syntax:
nodedev-autostart [--disable] device
Configure a device to be automatically started when the host machine
boots or the parent device becomes available. With --disable, the de-
vice will be set to manual mode and will no longer be automatically
started by the host. This command is only supported for persis-
tently-defined mediated devices.
VIRTUAL NETWORK COMMANDS
The following commands manipulate networks. Libvirt has the capability
to define virtual networks which can then be used by domains and linked
to actual network devices. For more detailed information about this
feature see the documentation at https://libvirt.org/formatnetwork.html
. Many of the commands for virtual networks are similar to the ones
used for domains, but the way to name a virtual network is either by
its name or UUID.
net-autostart
Syntax:
net-autostart network [--disable]
Configure a virtual network to be automatically started at boot. The
--disable option disable autostarting.
net-create
Syntax:
net-create file [--validate]
Create a transient (temporary) virtual network from an XML file and in-
stantiate (start) the network. See the documentation at
https://libvirt.org/formatnetwork.html to get a description of the XML
network format used by libvirt.
Optionally, the format of the input XML file can be validated against
an internal RNG schema with --validate.
net-define
Syntax:
net-define file [--validate]
Define an inactive persistent virtual network or modify an existing
persistent one from the XML file. Optionally, the format of the input
XML file can be validated against an internal RNG schema with --vali-
date.
net-destroy
Syntax:
net-destroy network
Destroy (stop) a given transient or persistent virtual network speci-
fied by its name or UUID. This takes effect immediately.
net-dumpxml
Syntax:
net-dumpxml [--inactive] [--xpath EXPRESSION] [--wrap] network
Output the virtual network information as an XML dump to stdout. If
--inactive is specified, then physical functions are not expanded into
their associated virtual functions.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
net-edit
Syntax:
net-edit network
Edit the XML configuration file for a network.
This is equivalent to:
virsh net-dumpxml --inactive network > network.xml
vi network.xml (or make changes with your other text editor)
virsh net-define network.xml
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
net-event
Syntax:
net-event {[network] event [--loop] [--timeout seconds] [--timestamp] | --list}
Wait for a class of network events to occur, and print appropriate de-
tails of events as they happen. The events can optionally be filtered
by network. Using --list as the only argument will provide a list of
possible event values known by this client, although the connection
might not allow registering for all these events.
By default, this command is one-shot, and returns success once an event
occurs; you can send SIGINT (usually via Ctrl-C) to quit immediately.
If --timeout is specified, the command gives up waiting for events af-
ter seconds have elapsed. With --loop, the command prints all events
until a timeout or interrupt key.
When --timestamp is used, a human-readable timestamp will be printed
before the event.
net-info
Syntax:
net-info network
Returns basic information about the network object.
net-list
Syntax:
net-list [--inactive | --all]
{ [--table] | --name | --uuid }
[--persistent] [<--transient>]
[--autostart] [<--no-autostart>]
Returns the list of active networks, if --all is specified this will
also include defined but inactive networks, if --inactive is specified
only the inactive ones will be listed. You may also want to filter the
returned networks by --persistent to list the persistent ones, --tran-
sient to list the transient ones, --autostart to list the ones with au-
tostart enabled, and --no-autostart to list the ones with autostart
disabled.
If --name is specified, network names are printed instead of the table
formatted one per line. If --uuid is specified network's UUID's are
printed instead of names. Flag --table specifies that the legacy ta-
ble-formatted output should be used. This is the default. All of these
are mutually exclusive.
NOTE: When talking to older servers, this command is forced to use a
series of API calls with an inherent race, where a pool might not be
listed or might appear more than once if it changed state between calls
while the list was being collected. Newer servers do not have this
problem.
net-name
Syntax:
net-name network-UUID
Convert a network UUID to network name.
net-start
Syntax:
net-start network
Start a (previously defined) inactive network.
net-undefine
Syntax:
net-undefine network
Undefine the configuration for a persistent network. If the network is
active, make it transient.
net-uuid
Syntax:
net-uuid network-name
Convert a network name to network UUID.
net-update
Syntax:
net-update network command section xml
[--parent-index index] [[--live] [--config] | [--current]]
Update the given section of an existing network definition, with the
changes optionally taking effect immediately, without needing to de-
stroy and re-start the network.
command is one of "add-first", "add-last", "add" (a synonym for
add-last), "delete", or "modify".
section is one of "bridge", "domain", "ip", "ip-dhcp-host",
"ip-dhcp-range", "forward", "forward-interface", "forward-pf", "port-
group", "dns-host", "dns-txt", or "dns-srv", each section being named
by a concatenation of the xml element hierarchy leading to the element
being changed. For example, "ip-dhcp-host" will change a <host> element
that is contained inside a <dhcp> element inside an <ip> element of the
network.
xml is either the text of a complete xml element of the type being
changed (e.g. "<host mac="00:11:22:33:44:55' ip='1.2.3.4'/>", or the
name of a file that contains a complete xml element. Disambiguation is
done by looking at the first character of the provided text - if the
first character is "<", it is xml text, if the first character is not
"<", it is the name of a file that contains the xml text to be used.
The --parent-index option is used to specify which of several parent
elements the requested element is in (0-based). For example, a dhcp
<host> element could be in any one of multiple <ip> elements in the
network; if a parent-index isn't provided, the "most appropriate" <ip>
element will be selected (usually the only one that already has a
<dhcp> element), but if --parent-index is given, that particular in-
stance of <ip> will get the modification.
If --live is specified, affect a running network. If --config is spec-
ified, affect the next startup of a persistent network. If --current
is specified, it is equivalent to either --live or --config, depending
on the current state of the guest. Both --live and --config flags may
be given, but --current is exclusive. Not specifying any flag is the
same as specifying --current.
net-dhcp-leases
Syntax:
net-dhcp-leases network [mac]
Get a list of dhcp leases for all network interfaces connected to the
given virtual network or limited output just for one interface if mac
is specified.
NETWORK PORT COMMANDS
The following commands manipulate network ports. Libvirt virtual net-
works have ports created when a virtual machine has a virtual network
interface added. In general there should be no need to use any of the
commands here, since the hypervisor drivers run these commands are the
right point in a virtual machine's lifecycle. They can be useful for
debugging problems and / or recovering from bugs / stale state.
net-port-list
Syntax:
net-port-list { [--table] | --uuid } network
List all network ports recorded against the network.
If --uuid is specified network ports' UUID's are printed instead of a
table. Flag --table specifies that the legacy table-formatted output
should be used. This is the default. All of these are mutually exclu-
sive.
net-port-create
Syntax:
net-port-create network file [--validate]
Allocate a new network port reserving resources based on the port de-
scription. Optionally, the format of the input XML file can be vali-
dated against an internal RNG schema with --validate.
net-port-dumpxml
Syntax:
net-port-dumpxml [--xpath EXPRESSION] [--wrap] network port
Output the network port information as an XML dump to stdout.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
net-port-delete
Syntax:
net-port-delete network port
Delete record of the network port and release its resources
INTERFACE COMMANDS
The following commands manipulate host interfaces. Often, these host
interfaces can then be used by name within domain <interface> elements
(such as a system-created bridge interface), but there is no require-
ment that host interfaces be tied to any particular guest configuration
XML at all.
Many of the commands for host interfaces are similar to the ones used
for domains, and the way to name an interface is either by its name or
its MAC address. However, using a MAC address for an iface argument
only works when that address is unique (if an interface and a bridge
share the same MAC address, which is often the case, then using that
MAC address results in an error due to ambiguity, and you must resort
to a name instead).
iface-bridge
Syntax:
iface-bridge interface bridge [--no-stp] [delay] [--no-start]
Create a bridge device named bridge, and attach the existing network
device interface to the new bridge. The new bridge defaults to start-
ing immediately, with STP enabled and a delay of 0; these settings can
be altered with --no-stp, --no-start, and an integer number of seconds
for delay. All IP address configuration of interface will be moved to
the new bridge device.
See also iface-unbridge for undoing this operation.
iface-define
Syntax:
iface-define file [--validate]
Define an inactive persistent physical host interface or modify an ex-
isting persistent one from the XML file. Optionally, the format of the
input XML file can be validated against an internal RNG schema with
--validate.
iface-destroy
Syntax:
iface-destroy interface
Destroy (stop) a given host interface, such as by running "if-down" to
disable that interface from active use. This takes effect immediately.
iface-dumpxml
Syntax:
iface-dumpxml [--inactive] [--xpath EXPRESSION] [--wrap] interface
Output the host interface information as an XML dump to stdout. If
--inactive is specified, then the output reflects the persistent state
of the interface that will be used the next time it is started.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
iface-edit
Syntax:
iface-edit interface
Edit the XML configuration file for a host interface.
This is equivalent to:
virsh iface-dumpxml iface > iface.xml
vi iface.xml (or make changes with your other text editor)
virsh iface-define iface.xml
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
iface-list
Syntax:
iface-list [--inactive | --all]
Returns the list of active host interfaces. If --all is specified this
will also include defined but inactive interfaces. If --inactive is
specified only the inactive ones will be listed.
iface-name
Syntax:
iface-name interface
Convert a host interface MAC to interface name, if the MAC address is
unique among the host's interfaces.
interface specifies the interface MAC address.
iface-mac
Syntax:
iface-mac interface
Convert a host interface name to MAC address.
interface specifies the interface name.
iface-start
Syntax:
iface-start interface
Start a (previously defined) host interface, such as by running
"if-up".
iface-unbridge
Syntax:
iface-unbridge bridge [--no-start]
Tear down a bridge device named bridge, releasing its underlying inter-
face back to normal usage, and moving all IP address configuration from
the bridge device to the underlying device. The underlying interface
is restarted unless --no-start is present; this flag is present for
symmetry, but generally not recommended.
See also iface-bridge for creating a bridge.
iface-undefine
Syntax:
iface-undefine interface
Undefine the configuration for an inactive host interface.
iface-begin
Syntax:
iface-begin
Create a snapshot of current host interface settings, which can later
be committed (iface-commit) or restored (iface-rollback). If a snap-
shot already exists, then this command will fail until the previous
snapshot has been committed or restored. Undefined behavior results if
any external changes are made to host interfaces outside of the libvirt
API between the beginning of a snapshot and its eventual commit or
rollback.
iface-commit
Syntax:
iface-commit
Declare all changes since the last iface-begin as working, and delete
the rollback point. If no interface snapshot has already been started,
then this command will fail.
iface-rollback
Syntax:
iface-rollback
Revert all host interface settings back to the state recorded in the
last iface-begin. If no interface snapshot has already been started,
then this command will fail. Rebooting the host also serves as an im-
plicit rollback point.
STORAGE POOL COMMANDS
The following commands manipulate storage pools. Libvirt has the capa-
bility to manage various storage solutions, including files, raw parti-
tions, and domain-specific formats, used to provide the storage volumes
visible as devices within virtual machines. For more detailed informa-
tion about this feature, see the documentation at
https://libvirt.org/formatstorage.html . Many of the commands for pools
are similar to the ones used for domains.
find-storage-pool-sources
Syntax:
find-storage-pool-sources type [srcSpec]
Returns XML describing all possible available storage pool sources that
could be used to create or define a storage pool of a given type. If
srcSpec is provided, it is a file that contains XML to further restrict
the query for pools.
Not all storage pools support discovery in this manner. Furthermore,
for those that do support discovery, only specific XML elements are re-
quired in order to return valid data, while other elements and even at-
tributes of some elements are ignored since they are not necessary to
find the pool based on the search criteria. The following lists the
supported type options and the expected minimal XML elements used to
perform the search.
For a "netfs" or "gluster" pool, the minimal expected XML required is
the <host> element with a "name" attribute describing the IP address or
hostname to be used to find the pool. The "port" attribute will be ig-
nored as will any other provided XML elements in srcSpec.
For a "logical" pool, the contents of the srcSpec file are ignored, al-
though if provided the file must at least exist.
For an "iscsi" or "iscsi-direct" pool, the minimal expect XML required
is the <host> element with a "name" attribute describing the IP address
or hostname to be used to find the pool (the iSCSI server address). Op-
tionally, the "port" attribute may be provided, although it will de-
fault to 3260. Optionally, an <initiator> XML element with a "name" at-
tribute may be provided to further restrict the iSCSI target search to
a specific initiator for multi-iqn iSCSI storage pools.
find-pool-sources-as
Syntax:
find-storage-pool-sources-as type [host] [port] [initiator]
Rather than providing srcSpec XML file for find-storage-pool-sources
use this command option in order to have virsh generate the query XML
file using the optional arguments. The command will return the same
output XML as find-storage-pool-sources.
Use host to describe a specific host to use for networked storage, such
as netfs, gluster, and iscsi type pools.
Use port to further restrict which networked port to utilize for the
connection if required by the specific storage backend, such as iscsi.
Use initiator to further restrict the iscsi type pool searches to spe-
cific target initiators.
pool-autostart
Syntax:
pool-autostart pool-or-uuid [--disable]
Configure whether pool should automatically start at boot.
pool-build
Syntax:
pool-build pool-or-uuid [--overwrite] [--no-overwrite]
Build a given pool.
Options --overwrite and --no-overwrite can only be used for pool-build
a filesystem, disk, or logical pool.
For a file system pool if neither flag is specified, then pool-build
just makes the target path directory and no attempt to run mkfs on the
target volume device. If --no-overwrite is specified, it probes to de-
termine if a filesystem already exists on the target device, returning
an error if one exists or using mkfs to format the target device if
not. If --overwrite is specified, mkfs is always executed and any ex-
isting data on the target device is overwritten unconditionally.
For a disk pool, if neither of them is specified or --no-overwrite is
specified, pool-build will check the target volume device for existing
filesystems or partitions before attempting to write a new label on the
target volume device. If the target volume device already has a label,
the command will fail. If --overwrite is specified, then no check will
be made on the target volume device prior to writing a new label. Writ-
ing of the label uses the pool source format type or "dos" if not spec-
ified.
For a logical pool, if neither of them is specified or --no-overwrite
is specified, pool-build will check the target volume devices for ex-
isting filesystems or partitions before attempting to initialize and
format each device for usage by the logical pool. If any target volume
device already has a label, the command will fail. If --overwrite is
specified, then no check will be made on the target volume devices
prior to initializing and formatting each device. Once all the target
volume devices are properly formatted via pvcreate, the volume group
will be created using all the devices.
pool-create
Syntax:
pool-create file [--build] [[--overwrite] | [--no-overwrite]]
Create and start a pool object from the XML file.
[--build] [[--overwrite] | [--no-overwrite]] perform a pool-build after
creation in order to remove the need for a follow-up command to build
the pool. The --overwrite and --no-overwrite flags follow the same
rules as pool-build. If just --build is provided, then pool-build is
called with no flags.
pool-create-as
Syntax:
pool-create-as name type
[--source-host hostname] [--source-path path] [--source-dev path]
[--source-name name] [--target path] [--source-format format]
[--source-initiator initiator-iqn]
[--auth-type authtype --auth-username username
[--secret-usage usage | --secret-uuid uuid]]
[--source-protocol-ver ver]
[[--adapter-name name] | [--adapter-wwnn wwnn --adapter-wwpn wwpn]
[--adapter-parent parent |
--adapter-parent-wwnn parent_wwnn adapter-parent-wwpn parent_wwpn |
--adapter-parent-fabric-wwn parent_fabric_wwn]]
[--build] [[--overwrite] | [--no-overwrite]] [--print-xml]
Create and start a pool object name from the raw parameters. If
--print-xml is specified, then print the XML of the pool object without
creating the pool. Otherwise, the pool has the specified type. When
using pool-create-as for a pool of type "disk", the existing partitions
found on the --source-dev path will be used to populate the disk pool.
Therefore, it is suggested to use pool-define-as and pool-build with
the --overwrite in order to properly initialize the disk pool.
[--source-host hostname] provides the source hostname for pools backed
by storage from a remote server (pool types netfs, iscsi, rbd, sheep-
dog, gluster).
[--source-path path] provides the source directory path for pools
backed by directories (pool type dir).
[--source-dev path] provides the source path for pools backed by physi-
cal devices (pool types fs, logical, disk, iscsi, zfs).
[--source-name name] provides the source name for pools backed by stor-
age from a named element (pool types logical, rbd, sheepdog, gluster).
[--target path] is the path for the mapping of the storage pool into
the host file system.
[--source-format format] provides information about the format of the
pool (pool types fs, netfs, disk, logical).
[--source-initiator initiator-iqn] provides the initiator iqn for iscsi
connection of the pool (pool type iscsi-direct).
[--auth-type authtype --auth-username username [--secret-usage usage |
--secret-uuid uuid]] provides the elements required to generate authen-
tication credentials for the storage pool. The authtype is either chap
for iscsi type pools or ceph for rbd type pools. Either the secret us-
age or uuid value may be provided, but not both.
[--source-protocol-ver ver] provides the NFS protocol version number
used to contact the server's NFS service via nfs mount option
'nfsvers=n'. It is expect the ver value is an unsigned integer.
[--adapter-name name] defines the scsi_hostN adapter name to be used
for the scsi_host adapter type pool.
[--adapter-wwnn wwnn --adapter-wwpn wwpn [--adapter-parent parent |
--adapter-parent-wwnn parent_wwnn adapter-parent-wwpn parent_wwpn |
--adapter-parent-fabric-wwn parent_fabric_wwn]] defines the wwnn and
wwpn to be used for the fc_host adapter type pool. Optionally provide
the parent scsi_hostN node device to be used for the vHBA either by
parent name, parent_wwnn and parent_wwpn, or parent_fabric_wwn. The
parent name could change between reboots if the hardware environment
changes, so providing the parent_wwnn and parent_wwpn ensure usage of
the same physical HBA even if the scsi_hostN node device changes. Usage
of the parent_fabric_wwn allows a bit more flexibility to choose an HBA
on the same storage fabric in order to define the pool.
[--build] [[--overwrite] | [--no-overwrite]] perform a pool-build after
creation in order to remove the need for a follow-up command to build
the pool. The --overwrite and --no-overwrite flags follow the same
rules as pool-build. If just --build is provided, then pool-build is
called with no flags.
For a "logical" pool only [--name] needs to be provided. The
[--source-name] if provided must match the Volume Group name. If not
provided, one will be generated using the [--name]. If provided the
[--target] is ignored and a target source is generated using the
[--source-name] (or as generated from the [--name]).
pool-define
Syntax:
pool-define file [--validate]
Define an inactive persistent storage pool or modify an existing per-
sistent one from the XML file. Optionally, the format of the input XML
file can be validated against an internal RNG schema with --validate.
pool-define-as
Syntax:
pool-define-as name type
[--source-host hostname] [--source-path path] [--source-dev path]
[*--source-name name*] [*--target path*] [*--source-format format*]
[--source-initiator initiator-iqn]
[*--auth-type authtype* *--auth-username username*
[*--secret-usage usage* | *--secret-uuid uuid*]]
[*--source-protocol-ver ver*]
[[*--adapter-name name*] | [*--adapter-wwnn* *--adapter-wwpn*]
[*--adapter-parent parent*]] [*--print-xml*]
Create, but do not start, a pool object name from the raw parameters.
If --print-xml is specified, then print the XML of the pool object
without defining the pool. Otherwise, the pool has the specified type.
Use the same arguments as pool-create-as, except for the --build,
--overwrite, and --no-overwrite options.
pool-destroy
Syntax:
pool-destroy pool-or-uuid
Destroy (stop) a given pool object. Libvirt will no longer manage the
storage described by the pool object, but the raw data contained in the
pool is not changed, and can be later recovered with pool-create.
pool-delete
Syntax:
pool-delete pool-or-uuid
Destroy the resources used by a given pool object. This operation is
non-recoverable. The pool object will still exist after this command,
ready for the creation of new storage volumes.
pool-dumpxml
Syntax:
pool-dumpxml [--inactive] [--xpath EXPRESSION] [--wrap] pool-or-uuid
Returns the XML information about the pool object. --inactive tells
virsh to dump pool configuration that will be used on next start of the
pool as opposed to the current pool configuration.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
pool-edit
Syntax:
pool-edit pool-or-uuid
Edit the XML configuration file for a storage pool.
This is equivalent to:
virsh pool-dumpxml pool > pool.xml
vi pool.xml (or make changes with your other text editor)
virsh pool-define pool.xml
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
pool-info
Syntax:
pool-info [--bytes] pool-or-uuid
Returns basic information about the pool object. If --bytes is speci-
fied the sizes of basic info are not converted to human friendly units.
pool-list
Syntax:
pool-list [--inactive] [--all]
[--persistent] [--transient]
[--autostart] [--no-autostart]
[[--details] [--uuid]
[--name] [<type>]
List pool objects known to libvirt. By default, only active pools are
listed; --inactive lists just the inactive pools, and --all lists all
pools.
In addition, there are several sets of filtering flags. --persistent is
to list the persistent pools, --transient is to list the transient
pools. --autostart lists the autostarting pools, --no-autostart lists
the pools with autostarting disabled. If --uuid is specified only
pool's UUIDs are printed. If --name is specified only pool's names are
printed. If both --name and --uuid are specified, pool's UUID and names
are printed side by side without any header. Option --details is mutu-
ally exclusive with options --uuid and --name.
You may also want to list pools with specified types using type, the
pool types must be separated by comma, e.g. --type dir,disk. The valid
pool types include 'dir', 'fs', 'netfs', 'logical', 'disk', 'iscsi',
'scsi', 'mpath', 'rbd', 'sheepdog', 'gluster', 'zfs', 'vstorage' and
'iscsi-direct'.
The --details option instructs virsh to additionally display pool per-
sistence and capacity related information where available.
NOTE: When talking to older servers, this command is forced to use a
series of API calls with an inherent race, where a pool might not be
listed or might appear more than once if it changed state between calls
while the list was being collected. Newer servers do not have this
problem.
pool-name
Syntax:
pool-name uuid
Convert the uuid to a pool name.
pool-refresh
Syntax:
pool-refresh pool-or-uuid
Refresh the list of volumes contained in pool.
pool-start
Syntax:
pool-start pool-or-uuid [--build] [[--overwrite] | [--no-overwrite]]
Start the storage pool, which is previously defined but inactive.
[--build] [[--overwrite] | [--no-overwrite]] perform a pool-build prior
to pool-start to ensure the pool environment is in an expected state
rather than needing to run the build command prior to startup. The
--overwrite and --no-overwrite flags follow the same rules as
pool-build. If just --build is provided, then pool-build is called with
no flags.
Note: A storage pool that relies on remote resources such as an "iscsi"
or a (v)HBA backed "scsi" pool may need to be refreshed multiple times
in order to have all the volumes detected (see pool-refresh). This is
because the corresponding volume devices may not be present in the
host's filesystem during the initial pool startup or the current re-
fresh attempt. The number of refresh retries is dependent upon the net-
work connection and the time the host takes to export the corresponding
devices.
pool-undefine
Syntax:
pool-undefine pool-or-uuid
Undefine the configuration for an inactive pool.
pool-uuid
Syntax:
pool-uuid pool
Returns the UUID of the named pool.
pool-event
Syntax:
pool-event {[pool] event [--loop] [--timeout seconds] [--timestamp] | --list}
Wait for a class of storage pool events to occur, and print appropriate
details of events as they happen. The events can optionally be fil-
tered by pool. Using --list as the only argument will provide a list
of possible event values known by this client, although the connection
might not allow registering for all these events.
By default, this command is one-shot, and returns success once an event
occurs; you can send SIGINT (usually via Ctrl-C) to quit immediately.
If --timeout is specified, the command gives up waiting for events af-
ter seconds have elapsed. With --loop, the command prints all events
until a timeout or interrupt key.
When --timestamp is used, a human-readable timestamp will be printed
before the event.
VOLUME COMMANDS
vol-create
Syntax:
vol-create pool-or-uuid FILE [--prealloc-metadata] [--validate]
Create a volume from an XML <file>.
pool-or-uuid is the name or UUID of the storage pool to create the vol-
ume in.
FILE is the XML <file> with the volume definition. An easy way to cre-
ate the XML <file> is to use the vol-dumpxml command to obtain the def-
inition of a pre-existing volume.
[--prealloc-metadata] preallocate metadata (for qcow2 images which
don't support full allocation). This option creates a sparse image file
with metadata, resulting in higher performance compared to images with
no preallocation and only slightly higher initial disk space usage.
If --validate is specified, validates the format of the XML document
against an internal RNG schema.
Example:
virsh vol-dumpxml --pool storagepool1 appvolume1 > newvolume.xml
vi newvolume.xml (or make changes with your other text editor)
virsh vol-create differentstoragepool newvolume.xml
vol-create-from
Syntax:
vol-create-from pool-or-uuid FILE vol-name-or-key-or-path
[--inputpool pool-or-uuid] [--prealloc-metadata] [--reflink] [--validate]
Create a volume, using another volume as input.
pool-or-uuid is the name or UUID of the storage pool to create the vol-
ume in.
FILE is the XML <file> with the volume definition.
vol-name-or-key-or-path is the name or key or path of the source vol-
ume.
--inputpool pool-or-uuid is the name or uuid of the storage pool the
source volume is in.
[--prealloc-metadata] preallocate metadata (for qcow2 images which
don't support full allocation). This option creates a sparse image file
with metadata, resulting in higher performance compared to images with
no preallocation and only slightly higher initial disk space usage.
When --reflink is specified, perform a COW lightweight copy, where the
data blocks are copied only when modified. If this is not possible,
the copy fails.
If --validate is specified, validates the format of the XML document
against an internal RNG schema.
vol-create-as
Syntax:
vol-create-as pool-or-uuid name capacity [--allocation size] [--format string]
[--backing-vol vol-name-or-key-or-path]
[--backing-vol-format string] [--prealloc-metadata] [--print-xml]
Create a volume from a set of arguments unless --print-xml is speci-
fied, in which case just the XML of the volume object is printed out
without any actual object creation.
pool-or-uuid is the name or UUID of the storage pool to create the vol-
ume in.
name is the name of the new volume. For a disk pool, this must match
the partition name as determined from the pool's source device path and
the next available partition. For example, a source device path of
/dev/sdb and there are no partitions on the disk, then the name must be
sdb1 with the next name being sdb2 and so on.
capacity is the size of the volume to be created, as a scaled integer
(see NOTES above), defaulting to bytes if there is no suffix.
--allocation size is the initial size to be allocated in the volume,
also as a scaled integer defaulting to bytes.
--format string is used in file based storage pools to specify the vol-
ume file format to use; raw, bochs, qcow, qcow2, vmdk, qed. Use ex-
tended for disk storage pools in order to create an extended partition
(other values are validity checked but not preserved when libvirtd is
restarted or the pool is refreshed).
--backing-vol vol-name-or-key-or-path is the source backing volume to
be used if taking a snapshot of an existing volume.
--backing-vol-format string is the format of the snapshot backing vol-
ume; raw, bochs, qcow, qcow2, qed, vmdk, host_device. These are, how-
ever, meant for file based storage pools.
[--prealloc-metadata] preallocate metadata (for qcow2 images which
don't support full allocation). This option creates a sparse image file
with metadata, resulting in higher performance compared to images with
no preallocation and only slightly higher initial disk space usage.
vol-clone
Syntax:
vol-clone vol-name-or-key-or-path name
[--pool pool-or-uuid] [--prealloc-metadata] [--reflink] [--print-xml]
Clone an existing volume within the parent pool. Less powerful, but
easier to type, version of vol-create-from.
vol-name-or-key-or-path is the name or key or path of the source vol-
ume.
name is the name of the new volume.
--pool pool-or-uuid is the name or UUID of the storage pool that con-
tains the source volume and will contain the new volume. If the source
volume name is provided instead of the key or path, then providing the
pool is necessary to find the volume to be cloned; otherwise, the first
volume found by the key or path will be used.
[--prealloc-metadata] preallocate metadata (for qcow2 images which
don't support full allocation). This option creates a sparse image file
with metadata, resulting in higher performance compared to images with
no preallocation and only slightly higher initial disk space usage.
When --reflink is specified, perform a COW lightweight copy, where the
data blocks are copied only when modified. If this is not possible,
the copy fails.
If --print-xml is specified, then the XML used to clone the volume is
printed instead.
vol-delete
Syntax:
vol-delete vol-name-or-key-or-path [--pool pool-or-uuid] [--delete-snapshots]
Delete a given volume.
vol-name-or-key-or-path is the volume name or key or path of the volume
to delete.
[--pool pool-or-uuid] is the name or UUID of the storage pool the vol-
ume is in. If the volume name is provided instead of the key or path,
then providing the pool is necessary to find the volume to be deleted;
otherwise, the first volume found by the key or path will be used.
The --delete-snapshots flag specifies that any snapshots associated
with the storage volume should be deleted as well. Not all storage
drivers support this option, presently only rbd.
vol-upload
Syntax:
vol-upload vol-name-or-key-or-path local-file
[--pool pool-or-uuid] [--offset bytes]
[--length bytes] [--sparse]
Upload the contents of local-file to a storage volume.
vol-name-or-key-or-path is the name or key or path of the volume where
the local-file will be uploaded.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key or path, then
providing the pool is necessary to find the volume to be uploaded into;
otherwise, the first volume found by the key or path will be used.
--offset is the position in the storage volume at which to start writ-
ing the data. The value must be 0 or larger.
--length is an upper bound of the amount of data to be uploaded. A
negative value is interpreted as an unsigned long long value to essen-
tially include everything from the offset to the end of the volume.
If --sparse is specified, this command will preserve volume sparseness.
An error will occur if the local-file is greater than the specified
length.
See the description for the libvirt virStorageVolUpload API for details
regarding possible target volume and pool changes as a result of the
pool refresh when the upload is attempted.
vol-download
Syntax:
vol-download vol-name-or-key-or-path local-file
[--pool pool-or-uuid] [--offset bytes] [--length bytes]
[--sparse]
Download the contents of a storage volume to local-file.
vol-name-or-key-or-path is the name or key or path of the volume to
download into local-file.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key or path, then
providing the pool is necessary to find the volume to be uploaded into;
otherwise, the first volume found by the key or path will be used.
--offset is the position in the storage volume at which to start read-
ing the data. The value must be 0 or larger.
--length is an upper bound of the amount of data to be downloaded. A
negative value is interpreted as an unsigned long long value to essen-
tially include everything from the offset to the end of the volume.
If --sparse is specified, this command will preserve volume sparseness.
vol-wipe
Syntax:
vol-wipe vol-name-or-key-or-path [--pool pool-or-uuid] [--algorithm algorithm]
Wipe a volume, ensure data previously on the volume is not accessible
to future reads.
vol-name-or-key-or-path is the name or key or path of the volume to
wipe. It is possible to choose different wiping algorithms instead of
re-writing volume with zeroes.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key or path, then
providing the pool is necessary to find the volume to be wiped; other-
wise, the first volume found by the key or path will be used.
Use the --algorithm switch choosing from the list of the following al-
gorithms in order to define which algorithm to use for the wipe.
Supported algorithms
• zero - 1-pass all zeroes
• nnsa - 4-pass NNSA Policy Letter NAP-14.1-C (XVI-8) for sani-
tizing removable and non-removable hard disks: random x2, 0x00, ver-
ify.
• dod - 4-pass DoD 5220.22-M section 8-306 procedure for sani-
tizing removable and non-removable rigid disks: random, 0x00, 0xff,
verify.
• bsi - 9-pass method recommended by the German Center of Secu-
rity in Information Technologies (https://www.bsi.bund.de): 0xff,
0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f.
• gutmann - The canonical 35-pass sequence described in Gutmann's
paper.
• schneier - 7-pass method described by Bruce Schneier in "Applied
Cryptography" (1996): 0x00, 0xff, random x5.
• pfitzner7 - Roy Pfitzner's 7-random-pass method: random x7.
• pfitzner33 - Roy Pfitzner's 33-random-pass method: random x33.
• random - 1-pass pattern: random.
• trim - 1-pass trimming the volume using TRIM or DISCARD
Note: The scrub binary will be used to handle the 'nnsa', 'dod', 'bsi',
'gutmann', 'schneier', 'pfitzner7' and 'pfitzner33' algorithms. The
availability of the algorithms may be limited by the version of the
scrub binary installed on the host. The 'zero' algorithm will write ze-
roes to the entire volume. For some volumes, such as sparse or rbd vol-
umes, this may result in completely filling the volume with zeroes mak-
ing it appear to be completely full. As an alternative, the 'trim' al-
gorithm does not overwrite all the data in a volume, rather it expects
the storage driver to be able to discard all bytes in a volume. It is
up to the storage driver to handle how the discarding occurs. Not all
storage drivers or volume types can support 'trim'.
vol-dumpxml
Syntax:
vol-dumpxml [--pool pool-or-uuid] [--xpath EXPRESSION] [--wrap]
vol-name-or-key-or-path
Output the volume information as an XML dump to stdout.
vol-name-or-key-or-path is the name or key or path of the volume to
output the XML.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key or path, then
providing the pool is necessary to find the volume to be uploaded into;
otherwise, the first volume found by the key or path will be used.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
vol-info
Syntax:
vol-info vol-name-or-key-or-path [--pool pool-or-uuid] [--bytes] [--physical]
Returns basic information about the given storage volume.
vol-name-or-key-or-path is the name or key or path of the volume to re-
turn information for.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key or path, then
providing the pool is necessary to find the volume to be uploaded into;
otherwise, the first volume found by the key or path will be used.
If --bytes is specified the sizes are not converted to human friendly
units.
If --physical is specified, then the host physical size is returned and
displayed instead of the allocation value. The physical value for some
file types, such as qcow2 may have a different (larger) physical value
than is shown for allocation. Additionally sparse files will have dif-
ferent physical and allocation values.
vol-list
Syntax:
vol-list [--pool pool-or-uuid] [--details]
Return the list of volumes in the given storage pool.
--pool pool-or-uuid is the name or UUID of the storage pool.
The --details option instructs virsh to additionally display volume
type and capacity related information where available.
vol-pool
Syntax:
vol-pool vol-key-or-path [--uuid]
Return the pool name or UUID for a given volume. By default, the pool
name is returned.
vol-key-or-path is the key or path of the volume to return the pool in-
formation.
If the --uuid option is given, the pool UUID is returned instead.
vol-path
Syntax:
vol-path vol-name-or-key [--pool pool-or-uuid]
Return the path for a given volume.
vol-name-or-key is the name or key of the volume to return the path.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key, then provid-
ing the pool is necessary to find the volume to be uploaded into; oth-
erwise, the first volume found by the key will be used.
vol-name
Syntax:
vol-name vol-key-or-path
Return the name for a given volume.
vol-key-or-path is the key or path of the volume to return the name.
vol-key
Syntax:
vol-key vol-name-or-path [--pool pool-or-uuid]
Return the volume key for a given volume.
vol-name-or-path is the name or path of the volume to return the volume
key.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the path, then provid-
ing the pool is necessary to find the volume to be uploaded into; oth-
erwise, the first volume found by the path will be used.
vol-resize
Syntax:
vol-resize vol-name-or-path capacity [--pool pool-or-uuid] [--allocate] [--delta] [--shrink]
Resize the capacity of the given volume, in bytes.
vol-name-or-key-or-path is the name or key or path of the volume to re-
size.
capacity is a scaled integer (see NOTES above) for the volume, which
defaults to bytes if there is no suffix.
--pool pool-or-uuid is the name or UUID of the storage pool the volume
is in. If the volume name is provided instead of the key or path, then
providing the pool is necessary to find the volume to be uploaded into;
otherwise, the first volume found by the key or path will be used.
The new capacity might be sparse unless --allocate is specified.
Normally, capacity is the new size, but if --delta is present, then it
is added to the existing size.
Attempts to shrink the volume will fail unless --shrink is present.
The capacity cannot be negative unless --shrink is provided, but a neg-
ative sign is not necessary.
This command is only safe for storage volumes not in use by an active
guest; see also blockresize for live resizing.
SECRET COMMANDS
The following commands manipulate "secrets" (e.g. passwords,
passphrases and encryption keys). Libvirt can store secrets indepen-
dently from their use, and other objects (e.g. volumes or domains) can
refer to the secrets for encryption or possibly other uses. Secrets
are identified using a UUID. See https://libvirt.org/formatsecret.html
for documentation of the XML format used to represent properties of se-
crets.
secret-define
Syntax:
secret-define file [--validate]
Create a secret with the properties specified in file, with no associ-
ated secret value. If file does not specify a UUID, choose one auto-
matically. If file specifies a UUID of an existing secret, replace its
properties by properties defined in file, without affecting the secret
value.
Optionally, the format of the input XML file can be validated against
an internal RNG schema with --validate.
secret-dumpxml
Syntax:
secret-dumpxml [--xpath EXPRESSION] [--wrap] secret
Output properties of secret (specified by its UUID) as an XML dump to
stdout.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
secret-event
Syntax:
secret-event {[secret] event [--loop] [--timeout seconds] [--timestamp] | --list}
Wait for a class of secret events to occur, and print appropriate de-
tails of events as they happen. The events can optionally be filtered
by secret. Using --list as the only argument will provide a list of
possible event values known by this client, although the connection
might not allow registering for all these events.
By default, this command is one-shot, and returns success once an event
occurs; you can send SIGINT (usually via Ctrl-C) to quit immediately.
If --timeout is specified, the command gives up waiting for events af-
ter seconds have elapsed. With --loop, the command prints all events
until a timeout or interrupt key.
When --timestamp is used, a human-readable timestamp will be printed
before the event.
secret-set-value
Syntax:
secret-set-value secret (--file filename [--plain] | --interactive | base64)
Set the value associated with secret (specified by its UUID) to the
value Base64-encoded value base64 or Base-64-encoded contents of file
named filename. Using the --plain flag is together with --file allows
one to use the file contents directly as the secret value.
If --interactive flag is used the secret value is read as a password
from the terminal.
Note that --file, --interactive and base64 options are mutually exclu-
sive.
Passing secrets via the base64 option on command line is INSECURE and
deprecated. Use the --file option instead.
secret-get-value
Syntax:
secret-get-value [--plain] secret
Output the value associated with secret (specified by its UUID) to std-
out, encoded using Base64.
If the --plain flag is used the value is not base64 encoded, but rather
printed raw. Note that unless virsh is started in quiet mode (virsh -q)
it prints a newline at the end of the command. This newline is not part
of the secret.
secret-undefine
Syntax:
secret-undefine secret
Delete a secret (specified by its UUID), including the associated
value, if any.
secret-list
Syntax:
secret-list [--ephemeral] [--no-ephemeral]
[--private] [--no-private]
Returns the list of secrets. You may also want to filter the returned
secrets by --ephemeral to list the ephemeral ones, --no-ephemeral to
list the non-ephemeral ones, --private to list the private ones, and
--no-private to list the non-private ones.
SNAPSHOT COMMANDS
The following commands manipulate domain snapshots. Snapshots take the
disk, memory, and device state of a domain at a point-of-time, and save
it for future use. They have many uses, from saving a "clean" copy of
an OS image to saving a domain's state before a potentially destructive
operation. Snapshots are identified with a unique name. See
https://libvirt.org/formatsnapshot.html for documentation of the XML
format used to represent properties of snapshots.
snapshot-create
Syntax:
snapshot-create domain [xmlfile] {[--redefine [--current]] |
[--no-metadata] [--halt] [--disk-only] [--reuse-external]
[--quiesce] [--atomic] [--live]} [--validate]
Create a snapshot for domain domain with the properties specified in
xmlfile. Optionally, the --validate option can be passed to validate
the format of the input XML file against an internal RNG schema (iden-
tical to using the virt-xml-validate(1) tool). Normally, the only prop-
erties settable for a domain snapshot are the <name> and <description>
elements, as well as <disks> if --disk-only is given; the rest of the
fields are ignored, and automatically filled in by libvirt. If xmlfile
is completely omitted, then libvirt will choose a value for all fields.
The new snapshot will become current, as listed by snapshot-current.
If --halt is specified, the domain will be left in an inactive state
after the snapshot is created.
If --disk-only is specified, the snapshot will only include disk con-
tent rather than the usual full system snapshot with vm state. Disk
snapshots are captured faster than full system snapshots, but reverting
to a disk snapshot may require fsck or journal replays, since it is
like the disk state at the point when the power cord is abruptly
pulled; and mixing --halt and --disk-only loses any data that was not
flushed to disk at the time.
If --redefine is specified, then all XML elements produced by snap-
shot-dumpxml are valid; this can be used to migrate snapshot hierarchy
from one machine to another, to recreate hierarchy for the case of a
transient domain that goes away and is later recreated with the same
name and UUID, or to make slight alterations in the snapshot metadata
(such as host-specific aspects of the domain XML embedded in the snap-
shot). When this flag is supplied, the xmlfile argument is mandatory,
and the domain's current snapshot will not be altered unless the --cur-
rent flag is also given.
If --no-metadata is specified, then the snapshot data is created, but
any metadata is immediately discarded (that is, libvirt does not treat
the snapshot as current, and cannot revert to the snapshot unless --re-
define is later used to teach libvirt about the metadata again).
If --reuse-external is specified, and the snapshot XML requests an ex-
ternal snapshot with a destination of an existing file, then the desti-
nation must exist and be pre-created with correct format and metadata.
The file is then reused; otherwise, a snapshot is refused to avoid los-
ing contents of the existing files.
If --quiesce is specified, libvirt will try to use guest agent to
freeze and unfreeze domain's mounted file systems. However, if domain
has no guest agent, snapshot creation will fail. Currently, this re-
quires --disk-only to be passed as well.
If --atomic is specified, libvirt will guarantee that the snapshot ei-
ther succeeds, or fails with no changes; not all hypervisors support
this. If this flag is not specified, then some hypervisors may fail
after partially performing the action, and dumpxml must be used to see
whether any partial changes occurred.
If --live is specified, libvirt takes the snapshot while the guest is
running. Both disk snapshot and domain memory snapshot are taken. This
increases the size of the memory image of the external snapshot. This
is currently supported only for full system external snapshots.
Existence of snapshot metadata will prevent attempts to undefine a per-
sistent guest. However, for transient domains, snapshot metadata is
silently lost when the domain quits running (whether by command such as
destroy or by internal guest action).
For now, it is not possible to create snapshots in a domain that has
checkpoints, although this restriction will be lifted in a future re-
lease.
snapshot-create-as
Syntax:
snapshot-create-as domain {[--print-xml] [--no-metadata]
[--halt] [--reuse-external]} [name]
[description] [--disk-only [--quiesce]] [--atomic] [--validate]
[[--live] [--memspec memspec]] [--diskspec] diskspec]...
Create a snapshot for domain domain with the given <name> and <descrip-
tion>; if either value is omitted, libvirt will choose a value. If
--print-xml is specified, then XML appropriate for snapshot-create is
output, rather than actually creating a snapshot. Otherwise, if --halt
is specified, the domain will be left in an inactive state after the
snapshot is created, and if --disk-only is specified, the snapshot will
not include vm state.
The --memspec option can be used to control whether a full system snap-
shot is internal or external. The --memspec flag is mandatory, fol-
lowed by a memspec of the form [file=]name[,snapshot=type], where type
can be no, internal, or external. To include a literal comma in
file=name, escape it with a second comma. --memspec cannot be used to-
gether with --disk-only.
The --diskspec option can be used to control how --disk-only and exter-
nal full system snapshots create external files. This option can occur
multiple times, according to the number of <disk> elements in the do-
main xml. Each <diskspec> is in the form disk[,snap-
shot=type][,driver=type][,stype=type][,file=name]. A diskspec must be
provided for disks backed by block devices as libvirt doesn't auto-gen-
erate file names for those. The optional stype parameter allows one to
control the type of the source file. Supported values are 'file' (de-
fault) and 'block'. To exclude a disk from an external snapshot use
--diskspec disk,snapshot=no.
To include a literal comma in disk or in file=name, escape it with a
second comma. A literal --diskspec must precede each diskspec unless
all three of domain, name, and description are also present. For exam-
ple, a diskspec of "vda,snapshot=external,file=/path/to,,new" results
in the following XML:
<disk name='vda' snapshot='external'>
<source file='/path/to,new'/>
</disk>
If --reuse-external is specified, and the domain XML or diskspec option
requests an external snapshot with a destination of an existing file,
then the destination must exist and be pre-created with correct format
and metadata. The file is then reused; otherwise, a snapshot is refused
to avoid losing contents of the existing files.
If --quiesce is specified, libvirt will try to use guest agent to
freeze and unfreeze domain's mounted file systems. However, if domain
has no guest agent, snapshot creation will fail. Currently, this re-
quires --disk-only to be passed as well.
If --no-metadata is specified, then the snapshot data is created, but
any metadata is immediately discarded (that is, libvirt does not treat
the snapshot as current, and cannot revert to the snapshot unless snap-
shot-create is later used to teach libvirt about the metadata again).
If --atomic is specified, libvirt will guarantee that the snapshot ei-
ther succeeds, or fails with no changes; not all hypervisors support
this. If this flag is not specified, then some hypervisors may fail
after partially performing the action, and dumpxml must be used to see
whether any partial changes occurred.
If --live is specified, libvirt takes the snapshot while the guest is
running. This increases the size of the memory image of the external
snapshot. This is currently supported only for external full system
snapshots.
For now, it is not possible to create snapshots in a domain that has
checkpoints, although this restriction will be lifted in a future re-
lease.
Optionally, the --validate option can be passed to validate XML docu-
ment which is internally generated by this command against the internal
RNG schema.
snapshot-current
Syntax:
snapshot-current domain {[--name] | [--security-info] | [snapshotname]}
Without snapshotname, this will output the snapshot XML for the do-
main's current snapshot (if any). If --name is specified, just the
current snapshot name instead of the full xml. Otherwise, using --se-
curity-info will also include security sensitive information in the
XML.
With snapshotname, this is a request to make the existing named snap-
shot become the current snapshot, without reverting the domain.
snapshot-edit
Syntax:
snapshot-edit domain [snapshotname] [--current] {[--rename] | [--clone]}
Edit the XML configuration file for snapshotname of a domain. If both
snapshotname and --current are specified, also force the edited snap-
shot to become the current snapshot. If snapshotname is omitted, then
--current must be supplied, to edit the current snapshot.
This is equivalent to:
virsh snapshot-dumpxml dom name > snapshot.xml
vi snapshot.xml (or make changes with your other text editor)
virsh snapshot-create dom snapshot.xml --redefine [--current]
except that it does some error checking.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
If --rename is specified, then the edits can change the snapshot name.
If --clone is specified, then changing the snapshot name will create a
clone of the snapshot metadata. If neither is specified, then the ed-
its must not change the snapshot name. Note that changing a snapshot
name must be done with care, since the contents of some snapshots, such
as internal snapshots within a single qcow2 file, are accessible only
from the original name.
snapshot-info
Syntax:
snapshot-info domain {snapshot | --current}
Output basic information about a named <snapshot>, or the current snap-
shot with --current.
snapshot-list
Syntax:
snapshot-list domain [--metadata] [--no-metadata]
[{--parent | --roots | [{--tree | --name}]}] [--topological]
[{[--from] snapshot | --current} [--descendants]]
[--leaves] [--no-leaves] [--inactive] [--active]
[--disk-only] [--internal] [--external]
List all of the available snapshots for the given domain, defaulting to
show columns for the snapshot name, creation time, and domain state.
Normally, table form output is sorted by snapshot name; using --topo-
logical instead sorts so that no child is listed before its ancestors
(although there may be more than one possible ordering with this prop-
erty).
If --parent is specified, add a column to the output table giving the
name of the parent of each snapshot. If --roots is specified, the list
will be filtered to just snapshots that have no parents. If --tree is
specified, the output will be in a tree format, listing just snapshot
names. These three options are mutually exclusive. If --name is speci-
fied only the snapshot name is printed. This option is mutually exclu-
sive with --tree.
If --from is provided, filter the list to snapshots which are children
of the given snapshot; or if --current is provided, start at the cur-
rent snapshot. When used in isolation or with --parent, the list is
limited to direct children unless --descendants is also present. When
used with --tree, the use of --descendants is implied. This option is
not compatible with --roots. Note that the starting point of --from or
--current is not included in the list unless the --tree option is also
present.
If --leaves is specified, the list will be filtered to just snapshots
that have no children. Likewise, if --no-leaves is specified, the list
will be filtered to just snapshots with children. (Note that omitting
both options does no filtering, while providing both options will ei-
ther produce the same list or error out depending on whether the server
recognizes the flags). Filtering options are not compatible with
--tree.
If --metadata is specified, the list will be filtered to just snapshots
that involve libvirt metadata, and thus would prevent undefine of a
persistent guest, or be lost on destroy of a transient domain. Like-
wise, if --no-metadata is specified, the list will be filtered to just
snapshots that exist without the need for libvirt metadata.
If --inactive is specified, the list will be filtered to snapshots that
were taken when the domain was shut off. If --active is specified, the
list will be filtered to snapshots that were taken when the domain was
running, and where the snapshot includes the memory state to revert to
that running state. If --disk-only is specified, the list will be fil-
tered to snapshots that were taken when the domain was running, but
where the snapshot includes only disk state.
If --internal is specified, the list will be filtered to snapshots that
use internal storage of existing disk images. If --external is speci-
fied, the list will be filtered to snapshots that use external files
for disk images or memory state.
snapshot-dumpxml
Syntax:
snapshot-dumpxml [--security-info] [--xpath EXPRESSION] [--wrap]
domain snapshot
Output the snapshot XML for the domain's snapshot named snapshot. Us-
ing --security-info will also include security sensitive information.
Use snapshot-current to easily access the XML of the current snapshot.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
snapshot-parent
Syntax:
snapshot-parent domain {snapshot | --current}
Output the name of the parent snapshot, if any, for the given snapshot,
or for the current snapshot with --current.
snapshot-revert
Syntax:
snapshot-revert domain {snapshot | --current} [{--running | --paused}]
[--force] [--reset-nvram]
Revert the given domain to the snapshot specified by snapshot, or to
the current snapshot with --current. Be aware that this is a destruc-
tive action; any changes in the domain since the last snapshot was
taken will be lost. Also note that the state of the domain after snap-
shot-revert is complete will be the state of the domain at the time the
original snapshot was taken.
Normally, reverting to a snapshot leaves the domain in the state it was
at the time the snapshot was created, except that a disk snapshot with
no vm state leaves the domain in an inactive state. Passing either the
--running or --paused flag will perform additional state changes (such
as booting an inactive domain, or pausing a running domain). Since
transient domains cannot be inactive, it is required to use one of
these flags when reverting to a disk snapshot of a transient domain.
Since libvirt 7.10.0 the VM process is always restarted so the follow-
ing paragraph is no longer valid. If the snapshot metadata lacks the
full VM XML it's no longer possible to revert to such snapshot.
There are a number of cases where a snapshot revert involves extra
risk, which requires the use of --force to proceed:
• One is the case of a snapshot that lacks full domain information
for reverting configuration (such as snapshots created prior to
libvirt 0.9.5); since libvirt cannot prove that the current con-
figuration matches what was in use at the time of the snapshot,
supplying --force assures libvirt that the snapshot is compatible
with the current configuration (and if it is not, the domain will
likely fail to run).
• Another is the case of reverting from a running domain to an ac-
tive state where a new hypervisor has to be created rather than
reusing the existing hypervisor, because it implies drawbacks such
as breaking any existing VNC or Spice connections; this condition
happens with an active snapshot that uses a provably incompatible
configuration, as well as with an inactive snapshot that is com-
bined with the --start or --pause flag.
• Also, libvirt will refuse to restore snapshots of inactive QEMU
domains while there is managed saved state. This is because those
snapshots do not contain memory state and will therefore not re-
place the existing memory state. This ends up switching a disk un-
derneath a running system and will likely cause extensive filesys-
tem corruption or crashes due to swap content mismatches when run.
If --reset-nvram is specified, any existing NVRAM file will be deleted
and re-initialized from its pristine template.
snapshot-delete
Syntax:
snapshot-delete domain {snapshot | --current}
[--metadata] [{--children | --children-only}]
Delete the snapshot for the domain named snapshot, or the current snap-
shot with --current. If this snapshot has child snapshots, changes
from this snapshot will be merged into the children. If --children is
passed, then delete this snapshot and any children of this snapshot.
If --children-only is passed, then delete any children of this snap-
shot, but leave this snapshot intact. These two flags are mutually ex-
clusive.
If --metadata is specified, then only delete the snapshot metadata
maintained by libvirt, while leaving the snapshot contents intact for
access by external tools; otherwise deleting a snapshot also removes
the data contents from that point in time.
CHECKPOINT COMMANDS
The following commands manipulate domain checkpoints. Checkpoints
serve as a point in time to identify which portions of a guest's disks
have changed after that time, making it possible to perform incremental
and differential backups. Checkpoints are identified with a unique
name. See https://libvirt.org/formatcheckpoint.html for documentation
of the XML format used to represent properties of checkpoints.
checkpoint-create
Syntax:
checkpoint-create domain [xmlfile] { --redefine [--redefine-validate] | [--quiesce]}
Create a checkpoint for domain domain with the properties specified in
xmlfile describing a <domaincheckpoint> top-level element. The format
of the input XML file will be validated against an internal RNG schema
(identical to using the virt-xml-validate(1) tool). If xmlfile is com-
pletely omitted, then libvirt will create a checkpoint with a name
based on the current time.
If --redefine is specified, then all XML elements produced by check-
point-dumpxml are valid; this can be used to migrate checkpoint hierar-
chy from one machine to another, to recreate hierarchy for the case of
a transient domain that goes away and is later recreated with the same
name and UUID, or to make slight alterations in the checkpoint metadata
(such as host-specific aspects of the domain XML embedded in the check-
point). When this flag is supplied, the xmlfile argument is mandatory.
If --redefine-validate is specified along with --redefine the hypervi-
sor performs validation of metadata associated with the checkpoint
stored in places besides the checkpoint XML. Note that some hypervisors
may require that the domain is running to perform validation.
If --quiesce is specified, libvirt will try to use guest agent to
freeze and unfreeze domain's mounted file systems. However, if domain
has no guest agent, checkpoint creation will fail.
Existence of checkpoint metadata will prevent attempts to undefine a
persistent guest. However, for transient domains, checkpoint metadata
is silently lost when the domain quits running (whether by command such
as destroy or by internal guest action).
For now, it is not possible to create checkpoints in a domain that has
snapshots, although this restriction will be lifted in a future re-
lease.
checkpoint-create-as
Syntax:
checkpoint-create-as domain [--print-xml] [name]
[description] [--quiesce] [--diskspec] diskspec]...
Create a checkpoint for domain domain with the given <name> and <de-
scription>; if either value is omitted, libvirt will choose a value.
If --print-xml is specified, then XML appropriate for checkpoint-create
is output, rather than actually creating a checkpoint.
The --diskspec option can be used to control which guest disks partici-
pate in the checkpoint. This option can occur multiple times, according
to the number of <disk> elements in the domain xml. Each <diskspec> is
in the form disk[,checkpoint=type][,bitmap=name]. A literal --diskspec
must precede each diskspec unless all three of domain, name, and de-
scription are also present. For example, a diskspec of "vda,check-
point=bitmap,bitmap=map1" results in the following XML:
<disk name='vda' checkpoint='bitmap' bitmap='map1'/>
If --quiesce is specified, libvirt will try to use guest agent to
freeze and unfreeze domain's mounted file systems. However, if domain
has no guest agent, checkpoint creation will fail.
For now, it is not possible to create checkpoints in a domain that has
snapshots, although this restriction will be lifted in a future re-
lease.
checkpoint-edit
Syntax:
checkpoint-edit domain checkpointname
Edit the XML configuration file for checkpointname of a domain.
This is equivalent to:
virsh checkpoint-dumpxml dom name > checkpoint.xml
vi checkpoint.xml (or make changes with your other text editor)
virsh checkpoint-create dom checkpoint.xml --redefine
except that it does some error checking, including that the edits
should not attempt to change the checkpoint name.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
checkpoint-info
Syntax:
checkpoint-info domain checkpoint
Output basic information about a named <checkpoint>.
checkpoint-list
Syntax:
checkpoint-list domain [{--parent | --roots |
[{--tree | --name}]}] [--topological]
[[--from] checkpoint | [--descendants]]
[--leaves] [--no-leaves]
List all of the available checkpoints for the given domain, defaulting
to show columns for the checkpoint name and creation time.
Normally, table form output is sorted by checkpoint name; using --topo-
logical instead sorts so that no child is listed before its ancestors
(although there may be more than one possible ordering with this prop-
erty).
If --parent is specified, add a column to the output table giving the
name of the parent of each checkpoint. If --roots is specified, the
list will be filtered to just checkpoints that have no parents. If
--tree is specified, the output will be in a tree format, listing just
checkpoint names. These three options are mutually exclusive. If
--name is specified only the checkpoint name is printed. This option is
mutually exclusive with --tree.
If --from is provided, filter the list to checkpoints which are chil-
dren of the given checkpoint. When used in isolation or with --parent,
the list is limited to direct children unless --descendants is also
present. When used with --tree, the use of --descendants is implied.
This option is not compatible with --roots. Note that the starting
point of --from is not included in the list unless the --tree option is
also present.
If --leaves is specified, the list will be filtered to just checkpoints
that have no children. Likewise, if --no-leaves is specified, the list
will be filtered to just checkpoints with children. (Note that omit-
ting both options does no filtering, while providing both options will
either produce the same list or error out depending on whether the
server recognizes the flags). Filtering options are not compatible
with --tree.
checkpoint-dumpxml
Syntax:
checkpoint-dumpxml [--security-info] [--no-domain] [--size]
[--xpath EXPRESSION] [--wrap] domain checkpoint
Output the checkpoint XML for the domain's checkpoint named checkpoint.
Using --security-info will also include security sensitive information.
Using --size will add XML indicating the current size in bytes of guest
data that has changed since the checkpoint was created (although remem-
ber that guest activity between a size check and actually creating a
backup can result in the backup needing slightly more space). Note that
some hypervisors may require that domain is running when --size is
used.
Using --no-domain will omit the <domain> element from the output for a
more compact view.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
checkpoint-parent
Syntax:
checkpoint-parent domain checkpoint
Output the name of the parent checkpoint, if any, for the given check-
point.
checkpoint-delete
Syntax:
checkpoint-delete domain checkpoint
[--metadata] [{--children | --children-only}]
Delete the checkpoint for the domain named checkpoint. The record of
which portions of the disk changed since the checkpoint are merged into
the parent checkpoint (if any). If --children is passed, then delete
this checkpoint and any children of this checkpoint. If --chil-
dren-only is passed, then delete any children of this checkpoint, but
leave this checkpoint intact. These two flags are mutually exclusive.
If --metadata is specified, then only delete the checkpoint metadata
maintained by libvirt, while leaving the checkpoint contents intact for
access by external tools; otherwise deleting a checkpoint also removes
the ability to perform an incremental backup from that point in time.
NWFILTER COMMANDS
The following commands manipulate network filters. Network filters al-
low filtering of the network traffic coming from and going to virtual
machines. Individual network traffic filters are written in XML and
may contain references to other network filters, describe traffic fil-
tering rules, or contain both. Network filters are referenced by vir-
tual machines from within their interface description. A network filter
may be referenced by multiple virtual machines' interfaces.
nwfilter-define
Syntax:
nwfilter-define xmlfile [--validate]
Make a new network filter known to libvirt. If a network filter with
the same name already exists, it will be replaced with the new XML.
Any running virtual machine referencing this network filter will have
its network traffic rules adapted. If for any reason the network traf-
fic filtering rules cannot be instantiated by any of the running vir-
tual machines, then the new XML will be rejected.
Optionally, the format of the input XML file can be validated against
an internal RNG schema with --validate.
nwfilter-undefine
Syntax:
nwfilter-undefine nwfilter-name
Delete a network filter. The deletion will fail if any running virtual
machine is currently using this network filter.
nwfilter-list
Syntax:
nwfilter-list
List all of the available network filters.
nwfilter-dumpxml
Syntax:
nwfilter-dumpxml [--xpath EXPRESSION] [--wrap] nwfilter-name
Output the network filter XML.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
nwfilter-edit
Syntax:
nwfilter-edit nwfilter-name
Edit the XML of a network filter.
This is equivalent to:
virsh nwfilter-dumpxml myfilter > myfilter.xml
vi myfilter.xml (or make changes with your other text editor)
virsh nwfilter-define myfilter.xml
except that it does some error checking. The new network filter may be
rejected due to the same reason as mentioned in nwfilter-define.
The editor used can be supplied by the $VISUAL or $EDITOR environment
variables, and defaults to vi.
NWFILTER BINDING COMMANDS
The following commands manipulate network filter bindings. Network fil-
ter bindings track the association between a network port and a network
filter. Generally the bindings are managed automatically by the hyper-
visor drivers when adding/removing NICs on a guest.
If an admin is creating/deleting TAP devices for non-guest usage, how-
ever, the network filter binding commands provide a way to make use of
the network filters directly.
nwfilter-binding-create
Syntax:
nwfilter-binding-create xmlfile [--validate]
Associate a network port with a network filter. The network filter
backend will immediately attempt to instantiate the filter rules on the
port. This command may be used to associate a filter with a currently
running guest that does not have a filter defined for a specific net-
work port. Since the bindings are generally automatically managed by
the hypervisor, using this command to define a filter for a network
port and then starting the guest afterwards may prevent the guest from
starting if it attempts to use the network port and finds a filter al-
ready defined.
Optionally, the format of the input XML file can be validated against
an internal RNG schema with --validate.
nwfilter-binding-delete
Syntax:
nwfilter-binding-delete port-name
Disassociate a network port from a network filter. The network filter
backend will immediately tear down the filter rules that exist on the
port. This command may be used to remove the network port binding for a
filter currently in use for the guest while the guest is running with-
out needing to restart the guest. Restoring the network port binding
filter for the running guest would be accomplished by using nwfil-
ter-binding-create.
nwfilter-binding-list
Syntax:
nwfilter-binding-list
List all of the network ports which have filters associated with them.
nwfilter-binding-dumpxml
Syntax:
nwfilter-binding-dumpxml [--xpath EXPRESSION] [--wrap] port-name
Output the network filter binding XML for the network device called
port-name.
If the --xpath argument provides an XPath expression, it will be evalu-
ated against the output XML and only those matching nodes will be
printed. The default behaviour is to print each matching node as a
standalone document, however, for ease of additional processing, the
--wrap argument will cause the matching node to be wrapped in a common
root node.
HYPERVISOR-SPECIFIC COMMANDS
NOTE: Use of the following commands is strongly discouraged. They can
cause libvirt to become confused and do the wrong thing on subsequent
operations. Once you have used these commands, please do not report
problems to the libvirt developers; the reports will be ignored. If
you find that these commands are the only way to accomplish something,
then it is better to request that the feature be added as a first-class
citizen in the regular libvirt library.
qemu-attach
Syntax:
qemu-attach pid
Attach an externally launched QEMU process to the libvirt QEMU driver.
The QEMU process must have been created with a monitor connection using
the UNIX driver. Ideally the process will also have had the '-name' ar-
gument specified.
$ qemu-kvm -cdrom ~/demo.iso \
-monitor unix:/tmp/demo,server,nowait \
-name foo \
-uuid cece4f9f-dff0-575d-0e8e-01fe380f12ea &
$ QEMUPID=$!
$ virsh qemu-attach $QEMUPID
Not all functions of libvirt are expected to work reliably after at-
taching to an externally launched QEMU process. There may be issues
with the guest ABI changing upon migration and device hotplug or hotun-
plug may not work. The attached environment should be considered pri-
marily read-only.
qemu-monitor-command
Syntax:
qemu-monitor-command domain { [--hmp] | [--pretty] [--return-value] }
[--pass-fds N,M,...] command...
Send an arbitrary monitor command command to domain domain through the
QEMU monitor. The results of the command will be printed on stdout.
If more than one argument is provided for command, they are concate-
nated with a space in between before passing the single command to the
monitor.
Note that libvirt uses the QMP to talk to qemu so command must be valid
JSON in QMP format to work properly. If command is not a JSON object
libvirt tries to wrap it as a JSON object to provide convenient inter-
face such as the groups of commands with identical handling:
# simple command
$ virsh qemu-monitor-command VM commandname
$ virsh qemu-monitor-command VM '{"execute":"commandname"}'
# with arguments
$ virsh qemu-monitor-command VM commandname '"arg1":123' '"arg2":"test"'
$ virsh qemu-monitor-command VM commandname '{"arg1":123,"arg2":"test"}'
$ virsh qemu-monitor-command VM '{"execute":"commandname", "arguments":{"arg1":123,"arg2":"test"}}'
If --pretty is given the QMP reply is pretty-printed.
If --return-value is given the 'return' key of the QMP response object
is extracted rather than passing through the full reply from QEMU.
If --hmp is passed, the command is considered to be a human monitor
command and libvirt will automatically convert it into QMP and convert
the result back.
If --pass-fds is specified, the argument is a comma separated list of
open file descriptors which should be passed on to qemu along with the
command.
qemu-agent-command
Syntax:
qemu-agent-command domain [--timeout seconds | --async | --block] command...
Send an arbitrary guest agent command command to domain domain through
QEMU agent. --timeout, --async and --block options are exclusive.
--timeout requires timeout seconds seconds and it must be positive.
When --aysnc is given, the command waits for timeout whether success or
failed. And when --block is given, the command waits forever with
blocking timeout.
qemu-monitor-event
Syntax:
qemu-monitor-event [domain] [--event event-name]
[--loop] [--timeout seconds] [--pretty] [--regex] [--no-case]
[--timestamp]
Wait for arbitrary QEMU monitor events to occur, and print out the de-
tails of events as they happen. The events can optionally be filtered
by domain or event-name. The 'query-events' QMP command can be used
via qemu-monitor-command to learn what events are supported. If
--regex is used, event-name is a basic regular expression instead of a
literal string. If --no-case is used, event-name will match case-in-
sensitively.
By default, this command is one-shot, and returns success once an event
occurs; you can send SIGINT (usually via Ctrl-C) to quit immediately.
If --timeout is specified, the command gives up waiting for events af-
ter seconds have elapsed. With --loop, the command prints all events
until a timeout or interrupt key. If --pretty is specified, any JSON
event details are pretty-printed for better legibility.
When --timestamp is used, a human-readable timestamp will be printed
before the event, and the timing information provided by QEMU will be
omitted.
lxc-enter-namespace
Syntax:
lxc-enter-namespace domain [--noseclabel] --
/path/to/binary [arg1, [arg2, ...]]
Enter the namespace of domain and execute the command /path/to/binary
passing the requested args. The binary path is relative to the con-
tainer root filesystem, not the host root filesystem. The binary will
inherit the environment variables / console visible to virsh. The com-
mand will be run with the same sVirt context and cgroups placement as
processes within the container. This command only works when connected
to the LXC hypervisor driver. This command succeeds only if
/path/to/binary has 0 exit status.
By default the new process will run with the security label of the new
parent container. Use the --noseclabel option to instead have the
process keep the same security label as virsh.
ENVIRONMENT
The following environment variables can be set to alter the behaviour
of virsh
• VIRSH_DEBUG=<0 to 4>
Turn on verbose debugging of virsh commands. Valid levels are
• VIRSH_DEBUG=0
DEBUG - Messages at ALL levels get logged
• VIRSH_DEBUG=1
INFO - Logs messages at levels INFO, NOTICE, WARNING and ERROR
• VIRSH_DEBUG=2
NOTICE - Logs messages at levels NOTICE, WARNING and ERROR
• VIRSH_DEBUG=3
WARNING - Logs messages at levels WARNING and ERROR
• VIRSH_DEBUG=4
ERROR - Messages at only ERROR level gets logged.
• VIRSH_LOG_FILE=``LOGFILE``
The file to log virsh debug messages.
• VIRSH_DEFAULT_CONNECT_URI
The hypervisor to connect to by default. Set this to a URI, in the
same format as accepted by the connect option. This environment vari-
able is deprecated in favour of the global LIBVIRT_DEFAULT_URI vari-
able which serves the same purpose.
• LIBVIRT_DEFAULT_URI
The hypervisor to connect to by default. Set this to a URI, in the
same format as accepted by the connect option. This overrides the de-
fault URI set in any client config file and prevents libvirt from
probing for drivers.
• VISUAL
The editor to use by the edit and related options.
• EDITOR
The editor to use by the edit and related options, if VISUAL is not
set.
• VIRSH_HISTSIZE
The number of commands to remember in the command history. The de-
fault value is 500.
• LIBVIRT_DEBUG=LEVEL
Turn on verbose debugging of all libvirt API calls. Valid levels are
• LIBVIRT_DEBUG=1
Messages at level DEBUG or above
• LIBVIRT_DEBUG=2
Messages at level INFO or above
• LIBVIRT_DEBUG=3
Messages at level WARNING or above
• LIBVIRT_DEBUG=4
Messages at level ERROR
For further information about debugging options consult
https://libvirt.org/logging.html
BUGS
Please report all bugs you discover. This should be done via either:
1. the mailing list
https://libvirt.org/contact.html
2. the bug tracker
https://libvirt.org/bugs.html
Alternatively, you may report bugs to your software distributor / ven-
dor.
AUTHORS
Please refer to the AUTHORS file distributed with libvirt.
COPYRIGHT
Copyright (C) 2005, 2007-2015 Red Hat, Inc., and the authors listed in
the libvirt AUTHORS file.
LICENSE
virsh is distributed under the terms of the GNU LGPL v2+. This is free
software; see the source for copying conditions. There is NO warranty;
not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE
SEE ALSO
virt-install(1), virt-xml-validate(1), virt-top(1), virt-df(1),
https://libvirt.org/
VIRSH(1)
Generated by dwww version 1.15 on Sun Jun 23 11:30:00 CEST 2024.