OPENSSL-TS(1SSL) OpenSSL OPENSSL-TS(1SSL)
NAME
openssl-ts - Time Stamping Authority command
SYNOPSIS
openssl ts -help
openssl ts -query [-config configfile] [-data file_to_hash] [-digest
digest_bytes] [-digest] [-tspolicy object_id] [-no_nonce] [-cert] [-in
request.tsq] [-out request.tsq] [-text] [-rand files] [-writerand file]
[-provider name] [-provider-path path] [-propquery propq]
openssl ts -reply [-config configfile] [-section tsa_section]
[-queryfile request.tsq] [-passin password_src] [-signer tsa_cert.pem]
[-inkey filename|uri] [-digest] [-chain certs_file.pem] [-tspolicy
object_id] [-in response.tsr] [-token_in] [-out response.tsr]
[-token_out] [-text] [-engine id] [-provider name] [-provider-path
path] [-propquery propq]
openssl ts -verify [-data file_to_hash] [-digest digest_bytes]
[-queryfile request.tsq] [-in response.tsr] [-token_in] [-untrusted
files|uris] [-CAfile file] [-CApath dir] [-CAstore uri]
[-allow_proxy_certs] [-attime timestamp] [-no_check_time]
[-check_ss_sig] [-crl_check] [-crl_check_all] [-explicit_policy]
[-extended_crl] [-ignore_critical] [-inhibit_any] [-inhibit_map]
[-partial_chain] [-policy arg] [-policy_check] [-policy_print]
[-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192]
[-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num]
[-verify_depth num] [-verify_email email] [-verify_hostname hostname]
[-verify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks]
[-provider name] [-provider-path path] [-propquery propq]
DESCRIPTION
This command is a basic Time Stamping Authority (TSA) client and server
application as specified in RFC 3161 (Time-Stamp Protocol, TSP). A TSA
can be part of a PKI deployment and its role is to provide long term
proof of the existence of a certain datum before a particular time.
Here is a brief description of the protocol:
1. The TSA client computes a one-way hash value for a data file and
sends the hash to the TSA.
2. The TSA attaches the current date and time to the received hash
value, signs them and sends the timestamp token back to the client.
By creating this token the TSA certifies the existence of the
original data file at the time of response generation.
3. The TSA client receives the timestamp token and verifies the
signature on it. It also checks if the token contains the same hash
value that it had sent to the TSA.
There is one DER encoded protocol data unit defined for transporting a
timestamp request to the TSA and one for sending the timestamp response
back to the client. This command has three main functions: creating a
timestamp request based on a data file, creating a timestamp response
based on a request, verifying if a response corresponds to a particular
request or a data file.
There is no support for sending the requests/responses automatically
over HTTP or TCP yet as suggested in RFC 3161. The users must send the
requests either by ftp or e-mail.
OPTIONS
-help
Print out a usage message.
-query
Generate a TS query. For details see "Timestamp Request
generation".
-reply
Generate a TS reply. For details see "Timestamp Response
generation".
-verify
Verify a TS response. For details see "Timestamp Response
verification".
Timestamp Request generation
The -query command can be used for creating and printing a timestamp
request with the following options:
-config configfile
The configuration file to use. Optional; for a description of the
default value, see "COMMAND SUMMARY" in openssl(1).
-data file_to_hash
The data file for which the timestamp request needs to be created.
stdin is the default if neither the -data nor the -digest parameter
is specified. (Optional)
-digest digest_bytes
It is possible to specify the message imprint explicitly without
the data file. The imprint must be specified in a hexadecimal
format, two characters per byte, the bytes optionally separated by
colons (e.g. 1A:F6:01:... or 1AF601...). The number of bytes must
match the message digest algorithm in use. (Optional)
-digest
The message digest to apply to the data file. Any digest supported
by the openssl-dgst(1) command can be used. The default is
SHA-256. (Optional)
-tspolicy object_id
The policy that the client expects the TSA to use for creating the
timestamp token. Either the dotted OID notation or OID names
defined in the config file can be used. If no policy is requested
the TSA will use its own default policy. (Optional)
-no_nonce
No nonce is specified in the request if this option is given.
Otherwise a 64 bit long pseudo-random none is included in the
request. It is recommended to use nonce to protect against replay-
attacks. (Optional)
-cert
The TSA is expected to include its signing certificate in the
response. (Optional)
-in request.tsq
This option specifies a previously created timestamp request in DER
format that will be printed into the output file. Useful when you
need to examine the content of a request in human-readable format.
(Optional)
-out request.tsq
Name of the output file to which the request will be written.
Default is stdout. (Optional)
-text
If this option is specified the output is human-readable text
format instead of DER. (Optional)
-rand files, -writerand file
See "Random State Options" in openssl(1) for details.
Timestamp Response generation
A timestamp response (TimeStampResp) consists of a response status and
the timestamp token itself (ContentInfo), if the token generation was
successful. The -reply command is for creating a timestamp response or
timestamp token based on a request and printing the response/token in
human-readable format. If -token_out is not specified the output is
always a timestamp response (TimeStampResp), otherwise it is a
timestamp token (ContentInfo).
-config configfile
The configuration file to use. Optional; for a description of the
default value, see "COMMAND SUMMARY" in openssl(1). See
"CONFIGURATION FILE OPTIONS" for configurable variables.
-section tsa_section
The name of the config file section containing the settings for the
response generation. If not specified the default TSA section is
used, see "CONFIGURATION FILE OPTIONS" for details. (Optional)
-queryfile request.tsq
The name of the file containing a DER encoded timestamp request.
(Optional)
-passin password_src
Specifies the password source for the private key of the TSA. See
description in openssl(1). (Optional)
-signer tsa_cert.pem
The signer certificate of the TSA in PEM format. The TSA signing
certificate must have exactly one extended key usage assigned to
it: timeStamping. The extended key usage must also be critical,
otherwise the certificate is going to be refused. Overrides the
signer_cert variable of the config file. (Optional)
-inkey filename|uri
The signer private key of the TSA in PEM format. Overrides the
signer_key config file option. (Optional)
-digest
Signing digest to use. Overrides the signer_digest config file
option. (Mandatory unless specified in the config file)
-chain certs_file.pem
The collection of certificates in PEM format that will all be
included in the response in addition to the signer certificate if
the -cert option was used for the request. This file is supposed to
contain the certificate chain for the signer certificate from its
issuer upwards. The -reply command does not build a certificate
chain automatically. (Optional)
-tspolicy object_id
The default policy to use for the response unless the client
explicitly requires a particular TSA policy. The OID can be
specified either in dotted notation or with its name. Overrides the
default_policy config file option. (Optional)
-in response.tsr
Specifies a previously created timestamp response or timestamp
token (if -token_in is also specified) in DER format that will be
written to the output file. This option does not require a request,
it is useful e.g. when you need to examine the content of a
response or token or you want to extract the timestamp token from a
response. If the input is a token and the output is a timestamp
response a default 'granted' status info is added to the token.
(Optional)
-token_in
This flag can be used together with the -in option and indicates
that the input is a DER encoded timestamp token (ContentInfo)
instead of a timestamp response (TimeStampResp). (Optional)
-out response.tsr
The response is written to this file. The format and content of the
file depends on other options (see -text, -token_out). The default
is stdout. (Optional)
-token_out
The output is a timestamp token (ContentInfo) instead of timestamp
response (TimeStampResp). (Optional)
-text
If this option is specified the output is human-readable text
format instead of DER. (Optional)
-engine id
See "Engine Options" in openssl(1). This option is deprecated.
-provider name
-provider-path path
-propquery propq
See "Provider Options" in openssl(1), provider(7), and property(7).
Timestamp Response verification
The -verify command is for verifying if a timestamp response or
timestamp token is valid and matches a particular timestamp request or
data file. The -verify command does not use the configuration file.
-data file_to_hash
The response or token must be verified against file_to_hash. The
file is hashed with the message digest algorithm specified in the
token. The -digest and -queryfile options must not be specified
with this one. (Optional)
-digest digest_bytes
The response or token must be verified against the message digest
specified with this option. The number of bytes must match the
message digest algorithm specified in the token. The -data and
-queryfile options must not be specified with this one. (Optional)
-queryfile request.tsq
The original timestamp request in DER format. The -data and -digest
options must not be specified with this one. (Optional)
-in response.tsr
The timestamp response that needs to be verified in DER format.
(Mandatory)
-token_in
This flag can be used together with the -in option and indicates
that the input is a DER encoded timestamp token (ContentInfo)
instead of a timestamp response (TimeStampResp). (Optional)
-untrusted files|uris
A set of additional untrusted certificates which may be needed when
building the certificate chain for the TSA's signing certificate.
These do not need to contain the TSA signing certificate and
intermediate CA certificates as far as the response already
includes them. (Optional)
Multiple sources may be given, separated by commas and/or
whitespace. Each file may contain multiple certificates.
-CAfile file, -CApath dir, -CAstore uri
See "Trusted Certificate Options" in
openssl-verification-options(1) for details. At least one of
-CAfile, -CApath or -CAstore must be specified.
-allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check,
-crl_check_all, -explicit_policy, -extended_crl, -ignore_critical,
-inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy,
-policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only,
-suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth,
-verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict
-issuer_checks
Set various options of certificate chain verification. See
"Verification Options" in openssl-verification-options(1) for
details.
Any verification errors cause the command to exit.
CONFIGURATION FILE OPTIONS
The -query and -reply commands make use of a configuration file. See
config(5) for a general description of the syntax of the config file.
The -query command uses only the symbolic OID names section and it can
work without it. However, the -reply command needs the config file for
its operation.
When there is a command line switch equivalent of a variable the switch
always overrides the settings in the config file.
tsa section, default_tsa
This is the main section and it specifies the name of another
section that contains all the options for the -reply command. This
default section can be overridden with the -section command line
switch. (Optional)
oid_file
This specifies a file containing additional OBJECT IDENTIFIERS.
Each line of the file should consist of the numerical form of the
object identifier followed by whitespace then the short name
followed by whitespace and finally the long name. (Optional)
oid_section
This specifies a section in the configuration file containing extra
object identifiers. Each line should consist of the short name of
the object identifier followed by = and the numerical form. The
short and long names are the same when this option is used.
(Optional)
RANDFILE
At startup the specified file is loaded into the random number
generator, and at exit 256 bytes will be written to it. (Note:
Using a RANDFILE is not necessary anymore, see the "HISTORY"
section.
serial
The name of the file containing the hexadecimal serial number of
the last timestamp response created. This number is incremented by
1 for each response. If the file does not exist at the time of
response generation a new file is created with serial number 1.
(Mandatory)
crypto_device
Specifies the OpenSSL engine that will be set as the default for
all available algorithms. The default value is built-in, you can
specify any other engines supported by OpenSSL (e.g. use chil for
the NCipher HSM). (Optional)
signer_cert
TSA signing certificate in PEM format. The same as the -signer
command line option. (Optional)
certs
A file containing a set of PEM encoded certificates that need to be
included in the response. The same as the -chain command line
option. (Optional)
signer_key
The private key of the TSA in PEM format. The same as the -inkey
command line option. (Optional)
signer_digest
Signing digest to use. The same as the -digest command line option.
(Mandatory unless specified on the command line)
default_policy
The default policy to use when the request does not mandate any
policy. The same as the -tspolicy command line option. (Optional)
other_policies
Comma separated list of policies that are also acceptable by the
TSA and used only if the request explicitly specifies one of them.
(Optional)
digests
The list of message digest algorithms that the TSA accepts. At
least one algorithm must be specified. (Mandatory)
accuracy
The accuracy of the time source of the TSA in seconds, milliseconds
and microseconds. E.g. secs:1, millisecs:500, microsecs:100. If any
of the components is missing zero is assumed for that field.
(Optional)
clock_precision_digits
Specifies the maximum number of digits, which represent the
fraction of seconds, that need to be included in the time field.
The trailing zeros must be removed from the time, so there might
actually be fewer digits, or no fraction of seconds at all.
Supported only on UNIX platforms. The maximum value is 6, default
is 0. (Optional)
ordering
If this option is yes the responses generated by this TSA can
always be ordered, even if the time difference between two
responses is less than the sum of their accuracies. Default is no.
(Optional)
tsa_name
Set this option to yes if the subject name of the TSA must be
included in the TSA name field of the response. Default is no.
(Optional)
ess_cert_id_chain
The SignedData objects created by the TSA always contain the
certificate identifier of the signing certificate in a signed
attribute (see RFC 2634, Enhanced Security Services). If this
variable is set to no, only this signing certificate identifier is
included in the SigningCertificate signed attribute. If this
variable is set to yes and the certs variable or the -chain option
is specified then the certificate identifiers of the chain will
also be included, where the -chain option overrides the certs
variable. Default is no. (Optional)
ess_cert_id_alg
This option specifies the hash function to be used to calculate the
TSA's public key certificate identifier. Default is sha1.
(Optional)
EXAMPLES
All the examples below presume that OPENSSL_CONF is set to a proper
configuration file, e.g. the example configuration file
openssl/apps/openssl.cnf will do.
Timestamp Request
To create a timestamp request for design1.txt with SHA-256 digest,
without nonce and policy, and without requirement for a certificate in
the response:
openssl ts -query -data design1.txt -no_nonce \
-out design1.tsq
To create a similar timestamp request with specifying the message
imprint explicitly:
openssl ts -query -digest b7e5d3f93198b38379852f2c04e78d73abdd0f4b \
-no_nonce -out design1.tsq
To print the content of the previous request in human readable format:
openssl ts -query -in design1.tsq -text
To create a timestamp request which includes the SHA-512 digest of
design2.txt, requests the signer certificate and nonce, and specifies a
policy id (assuming the tsa_policy1 name is defined in the OID section
of the config file):
openssl ts -query -data design2.txt -sha512 \
-tspolicy tsa_policy1 -cert -out design2.tsq
Timestamp Response
Before generating a response a signing certificate must be created for
the TSA that contains the timeStamping critical extended key usage
extension without any other key usage extensions. You can add this line
to the user certificate section of the config file to generate a proper
certificate;
extendedKeyUsage = critical,timeStamping
See openssl-req(1), openssl-ca(1), and openssl-x509(1) for
instructions. The examples below assume that cacert.pem contains the
certificate of the CA, tsacert.pem is the signing certificate issued by
cacert.pem and tsakey.pem is the private key of the TSA.
To create a timestamp response for a request:
openssl ts -reply -queryfile design1.tsq -inkey tsakey.pem \
-signer tsacert.pem -out design1.tsr
If you want to use the settings in the config file you could just
write:
openssl ts -reply -queryfile design1.tsq -out design1.tsr
To print a timestamp reply to stdout in human readable format:
openssl ts -reply -in design1.tsr -text
To create a timestamp token instead of timestamp response:
openssl ts -reply -queryfile design1.tsq -out design1_token.der -token_out
To print a timestamp token to stdout in human readable format:
openssl ts -reply -in design1_token.der -token_in -text -token_out
To extract the timestamp token from a response:
openssl ts -reply -in design1.tsr -out design1_token.der -token_out
To add 'granted' status info to a timestamp token thereby creating a
valid response:
openssl ts -reply -in design1_token.der -token_in -out design1.tsr
Timestamp Verification
To verify a timestamp reply against a request:
openssl ts -verify -queryfile design1.tsq -in design1.tsr \
-CAfile cacert.pem -untrusted tsacert.pem
To verify a timestamp reply that includes the certificate chain:
openssl ts -verify -queryfile design2.tsq -in design2.tsr \
-CAfile cacert.pem
To verify a timestamp token against the original data file:
openssl ts -verify -data design2.txt -in design2.tsr \
-CAfile cacert.pem
To verify a timestamp token against a message imprint:
openssl ts -verify -digest b7e5d3f93198b38379852f2c04e78d73abdd0f4b \
-in design2.tsr -CAfile cacert.pem
You could also look at the 'test' directory for more examples.
BUGS
• No support for timestamps over SMTP, though it is quite easy to
implement an automatic e-mail based TSA with procmail(1) and perl(1).
HTTP server support is provided in the form of a separate apache
module. HTTP client support is provided by tsget(1). Pure TCP/IP
protocol is not supported.
• The file containing the last serial number of the TSA is not locked
when being read or written. This is a problem if more than one
instance of openssl(1) is trying to create a timestamp response at
the same time. This is not an issue when using the apache server
module, it does proper locking.
• Look for the FIXME word in the source files.
• The source code should really be reviewed by somebody else, too.
• More testing is needed, I have done only some basic tests (see
test/testtsa).
HISTORY
OpenSSL 1.1.1 introduced a new random generator (CSPRNG) with an
improved seeding mechanism. The new seeding mechanism makes it
unnecessary to define a RANDFILE for saving and restoring randomness.
This option is retained mainly for compatibility reasons.
The -engine option was deprecated in OpenSSL 3.0.
SEE ALSO
openssl(1), tsget(1), openssl-req(1), openssl-x509(1), openssl-ca(1),
openssl-genrsa(1), config(5), ossl_store-file(7)
COPYRIGHT
Copyright 2006-2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
3.0.13 2024-03-03 OPENSSL-TS(1SSL)
Generated by dwww version 1.15 on Thu Jun 20 14:10:22 CEST 2024.