CS2CS(1) PROJ CS2CS(1)
NAME
cs2cs - Cartographic coordinate system filter
SYNOPSIS
cs2cs [-eEfIlrstvwW [args]]
[[--area <name_or_code>] | [--bbox <west_long,south_lat,east_long,north_lat>]]
[--authority <name>] [--no-ballpark] [--accuracy <accuracy>] [--3d]
([+opt[=arg] ...] [+to +opt[=arg] ...] | {source_crs} {target_crs})
file ...
where {source_crs} or {target_crs} is one of the possibilities ac-
cepted by proj_create(), provided it expresses a CRS
• a proj-string,
• a WKT string,
• an object code (like "EPSG:4326", "urn:ogc:def:crs:EPSG::4326",
"urn:ogc:def:coordinateOperation:EPSG::1671"),
• an Object name. e.g "WGS 84", "WGS 84 / UTM zone 31N". In that
case as uniqueness is not guaranteed, heuristics are applied to
determine the appropriate best match.
• a OGC URN combining references for compound coordinate reference
systems (e.g "urn:ogc:def:crs,crs:EPSG::2393,crs:EPSG::5717" or
custom abbreviated syntax "EPSG:2393+5717"),
• a OGC URN combining references for references for projected or de-
rived CRSs e.g. for Projected 3D CRS "UTM zone 31N / WGS 84 (3D)":
"-
urn:ogc:def:crs,crs:EPSG::4979,cs:PROJ::ENh,coordinateOpera-
tion:EPSG::16031" (added in 6.2)
• a OGC URN combining references for concatenated operations (e.g.
"-
urn:ogc:def:coordinateOperation,coordinateOperation:EPSG::3895,co-
ordinateOperation:EPSG::1618")
• a PROJJSON string. The jsonschema is at
https://proj.org/schemas/v0.4/projjson.schema.json (added in 6.2)
• a compound CRS made from two object names separated with " + ".
e.g. "WGS 84 + EGM96 height" (added in 7.1)
New in version 6.0.0.
NOTE:
before 7.0.1, it was needed to add +to between {source_crs} and
{target_crs} when adding a filename
DESCRIPTION
cs2cs performs transformation between the source and destination carto-
graphic coordinate reference system on a set of input points. The coor-
dinate reference system transformation can include translation between
projected and geographic coordinates as well as the application of da-
tum shifts.
The following control parameters can appear in any order:
-I Method to specify inverse translation, convert from +to coordi-
nate system to the primary coordinate system defined.
-t<a> Where a specifies a character employed as the first character to
denote a control line to be passed through without processing.
This option applicable to ASCII input only. (# is the default
value).
-d <n> New in version 5.2.0.
Specify the number of decimals to round to in the output.
-e <string>
Where string is an arbitrary string to be output if an error is
detected during data transformations. The default value is a
three character string: *\t*.
-E Causes the input coordinates to be copied to the output line
prior to printing the converted values.
-l<[=id]>
List projection identifiers that can be selected with +proj.
cs2cs -l=id gives expanded description of projection id, e.g.
cs2cs -l=merc.
-lp List of all projection id that can be used with the +proj param-
eter. Equivalent to cs2cs -l.
-lP Expanded description of all projections that can be used with
the +proj parameter.
-le List of all ellipsoids that can be selected with the +ellps pa-
rameters.
-lu List of all distance units that can be selected with the +units
parameter.
-r This options reverses the order of the first two expected inputs
from that specified by the CRS to the opposite order. The third
coordinate, typically height, remains third.
-s This options reverses the order of the first two expected out-
puts from that specified by the CRS to the opposite order. The
third coordinate, typically height, remains third.
-f <format>
Where format is a printf format string to control the form of
the output values. For inverse projections, the output will be
in degrees when this option is employed. If a format is speci-
fied for inverse projection the output data will be in decimal
degrees. The default format is "%.2f" for forward projection and
DMS for inverse.
-w<n> Where n is the number of significant fractional digits to employ
for seconds output (when the option is not specified, -w3 is as-
sumed).
-W<n> Where n is the number of significant fractional digits to employ
for seconds output. When -W is employed the fields will be con-
stant width with leading zeroes. Valid range: -W0 through -W8.
-v Causes a listing of cartographic control parameters tested for
and used by the program to be printed prior to input data.
--area <name_or_code>
New in version 8.0.0.
Specify an area of interest to restrict the results when re-
searching coordinate operations between 2 CRS. The area of in-
terest can be specified either as a name (e.g "Denmark - on-
shore") or a AUTHORITY:CODE (EPSG:3237)
This option is mutually exclusive with --bbox.
--bbox <west_long,south_lat,east_long,north_lat>
New in version 8.0.0.
Specify an area of interest to restrict the results when re-
searching coordinate operations between 2 CRS. The area of in-
terest is specified as a bounding box with geographic coordi-
nates, expressed in degrees in a unspecified geographic CRS.
west_long and east_long should be in the [-180,180] range, and
south_lat and north_lat in the [-90,90]. west_long is generally
lower than east_long, except in the case where the area of in-
terest crosses the antimeridian.
--no-ballpark
New in version 8.0.0.
Disallow any coordinate operation that is, or contains, a
Ballpark transformation
--accuracy <accuracy>
New in version 8.0.0.
Sets the minimum desired accuracy for candidate coordinate oper-
ations.
--authority <name>
New in version 8.0.0.
This option can be used to restrict the authority of coordinate
operations looked up in the database. When not specified, coor-
dinate operations from any authority will be searched, with the
restrictions set in the authority_to_authority_preference data-
base table related to the authority of the source/target CRS
themselves. If authority is set to any, then coordinate opera-
tions from any authority will be searched If authority is a
non-empty string different of any, then coordinate operations
will be searched only in that authority namespace (e.g EPSG).
This option is mutually exclusive with --bbox.
--3d New in version 9.1.
"Promote" 2D CRS(s) to their 3D version, where the vertical axis
is the ellipsoidal height in metres, using the ellipsoid of the
base geodetic CRS. Depending on PROJ versions and the exact na-
ture of the CRS involved, especially before PROJ 9.1, a mix of
2D and 3D CRS could lead to 2D or 3D transformations. Starting
with PROJ 9.1, both CRS need to be 3D for vertical transforma-
tion to possibly happen.
The +opt run-line arguments are associated with cartographic parame-
ters.
The cs2cs program requires two coordinate reference system (CRS) defi-
nitions. The first (or primary is defined based on all projection pa-
rameters not appearing after the +to argument. All projection parame-
ters appearing after the +to argument are considered the definition of
the second CRS. If there is no second CRS defined, a geographic CRS
based on the datum and ellipsoid of the source CRS is assumed. Note
that the source and destination CRS can both of same or different na-
ture (geographic, projected, compound CRS), or one of each and may have
the same or different datums.
When using a WKT definition or a AUTHORITY:CODE, the axis order of the
CRS will be enforced. So for example if using EPSG:4326, the first
value expected (or returned) will be a latitude.
Internally, cs2cs uses the proj_create_crs_to_crs() function to compute
the appropriate coordinate operation, so implementation details of this
function directly impact the results returned by the program.
The environment parameter PROJ_DATA establishes the directory for re-
source files (database, datum shift grids, etc.)
One or more files (processed in left to right order) specify the source
of data to be transformed. A - will specify the location of processing
standard input. If no files are specified, the input is assumed to be
from stdin. For input data the two data values must be in the first
two white space separated fields and when both input and output are
ASCII all trailing portions of the input line are appended to the out-
put line.
Input geographic data (longitude and latitude) must be in DMS or deci-
mal degrees format and input cartesian data must be in units consistent
with the ellipsoid major axis or sphere radius units. Output geographic
coordinates will normally be in DMS format (use -f %.12f for decimal
degrees with 12 decimal places), while projected (cartesian) coordi-
nates will be in linear (meter, feet) units.
Use of remote grids
New in version 7.0.0.
If the PROJ_NETWORK environment variable is set to ON, cs2cs will at-
tempt to use remote grids stored on CDN (Content Delivery Network)
storage, when they are not available locally.
More details are available in the Network capabilities section.
EXAMPLES
Using PROJ strings
The following script
cs2cs +proj=latlong +datum=NAD83 +to +proj=utm +zone=10 +datum=NAD27 -r <<EOF
45°15'33.1" 111.5W
45d15.551666667N -111d30
+45.25919444444 111d30'000w
EOF
will transform the input NAD83 geographic coordinates into NAD27 coor-
dinates in the UTM projection with zone 10 selected. The geographic
values of this example are equivalent and meant as examples of various
forms of DMS input. The x-y output data will appear as three lines of:
1402285.98 5076292.42 0.00
NOTE:
To get those exact values, you have need to have all current grids
installed locally or use networking capabilities mentioned above.
Using EPSG CRS codes
Transforming from WGS 84 latitude/longitude (in that order) to UTM Zone
31N/WGS 84
cs2cs EPSG:4326 EPSG:32631 <<EOF
45N 2E
EOF
outputs
421184.70 4983436.77 0.00
Using EPSG CRS names
Transforming from WGS 84 latitude/longitude (in that order) with EGM96
height to UTM Zone 31N/WGS 84 with WGS84 ellipsoidal height
echo 45 2 0 | cs2cs "WGS 84 + EGM96 height" "WGS 84 / UTM zone 31N" --3d
outputs
421184.70 4983436.77 50.69
NOTE:
To get those exact values, you have need to have the EGM96 grid in-
stalled locally or use networking capabilities mentioned above.
SEE ALSO
proj(1), cct(1), geod(1), gie(1), projinfo(1), projsync(1)
BUGS
A list of known bugs can be found at
https://github.com/OSGeo/PROJ/issues where new bug reports can be sub-
mitted to.
HOME PAGE
https://proj.org/
AUTHOR
Frank Warmerdam
COPYRIGHT
1983-2022
9.1.1 Dec 1st, 2022 CS2CS(1)
Generated by dwww version 1.15 on Sat Jun 29 02:00:12 CEST 2024.