commit 0e94cd85b2fa1501d4d883de3c97074c5ea5c373
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Nov 16 11:22:53 2016 +0700
Bump minor for release.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 3fd542b0394f9ab198b7750409ec2c0f16eb59da
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Nov 16 11:35:58 2016 +0700
vmware/vmwgfx: Add a missing source file for distribution
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
(cherry picked from commit fade4f46e84e93153edc3472abb73635f87555e6)
commit e53a7e42eb7597808a364f230a97ce64481f084b
Author: Hans de Goede <hdegoede@redhat.com>
Date: Thu Sep 29 19:37:22 2016 +0200
Adapt Block/WakeupHandler signature for ABI 23
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
(cherry picked from commit d64d01c7a599dc3c79125701f076a3e459cefdc2)
commit 0bcd4df1843f00f8e8507750401ec2a2a29330dc
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Feb 11 09:45:58 2016 +0100
vmware: Bump minor to signal availability of new features
While this may never be an official release, bump minor to enable the
new resolutionKMS functionality. This signals the availability of
autolayout and resolutionKMS support.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit 5036e9d11a899d831b1471f64132eefcf459b222
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Feb 11 09:40:55 2016 +0100
vmware/vmwgfx: Don't require screen objects to run
Using the vmwgfx ldu backend works just as fine except that we're limited
to implicit layout placement.
With this test on, we may end up in the odd situation that the vmwgfx kernel
module and the vwmare legacy Xorg driver are enabled simultaneously, and that
is an unsupported configuration. It will also break resolutionKMS which will
be enabled based on vmwgfx version but should be disabled since the legacy
Xorg driver runs...
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit 57d4499cc252bd1c3362a569ca7fd99ba6b645ed
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 20 19:08:21 2016 +0100
vmware/vmwgfx: Disable autolayout if we detect an old resolutionset
While the autolayout feature should really avoid races both with the old
resolutionSet RandR12 code and with new compositor layout code, let's
disable the autolayout feature if someone tries to set the
layout / resolution through the vmwarectrl interface.
That's most likely an old resolutionSet.
Autolayout is turned on on each new screen generation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 48fb82f13ca290e9fbb8c7f79aba5ee119a3ce7f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 20 14:21:40 2016 +0100
vmware/vmwgfx: Read the implicit output status from KMS if available.
This information is used to switch to software cursors if we have
multiple overlapping explicit outputs and thus might need to display
two cursors simultaneously.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit a81e359d88151159e3a19ceb95027029fef0a9ba
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 20 14:04:13 2016 +0100
vmware/vmwgfx: Avoid filling the log with modeline printouts
There are specific debug options for that.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 5978597da92898a424837ee89e66f66a8120480c
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 20 13:01:21 2016 +0100
vmware/vmwgfx: Add a layout handler v2
Add a handler that, on hotplug events, scans for a new GUI layout and
tries to set that layout using XRandR similar to what the RandR1.2 part of
vmware tools resolutionSet module is doing today.
v2: Address review comments
- Keep the old layout in case of screen resizing errors
- Fix the vmwgfx_layout handler() declaration.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 885e360b16fd88b48b40930c6277637615aab188
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 20 12:09:22 2016 +0100
vmware/vmwgfx: Update RandR output properties on hotplug events v2
Update also RandR output properties when we receive hotplug events;
the RRGetInfo function doesn't do this.
This makes sure RandR sends out property change events to clients.
Also remove some debugging printouts.
v2: Address review comment from Sinclair Yeh;
make sure struct output_private::drm_connector is always valid.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit ada41a5988df8414011ed37ec51cbb402c9c8716
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 20 11:51:46 2016 +0100
vmware/vmwgfx: Add missing includes of the config.h header.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 755e38f373a511bd774a61c9420a67f630f71037
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Dec 18 10:46:42 2014 +0100
vmware/vmwgfx: Expose kernel connector attributes and react to hotplug events
Much of this code is borrowed from the xf86-video-modesetting driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 1e443c4717a8b107c0c9283e222482703ac0f358
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 25 01:51:11 2015 -0800
vmware/vmwgfx: Try to use only_hw_present semantics if screen targets are enabled
If screen targets are enabled and there is a reasonable chance that the vmwgfx
drm driver can use the surface backing a pixmap as a screen target surface,
then make that surface a modesetting framebuffer rather than the corresponding
DMA buffer. In practice this applies when we start scanning out from the
origin (0,0) of the pixmap. However, we would also like to apply the constraint
that the scanout area is the entire pixmap, since that is the constraint used
by the drm driver, but that would currently require drm framebuffer
reallocations and possible flicker, so disable that for now. The drm driver
will correctly handle the possibly oversized surface handed to it anyway, and
the cost we pay for this is an extra hardware copy of the dirtied area when
doing a software update of the scanout.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 8f0cf7c03597532feb1a8ccf3bb1cafcd6170f89
Author: Thomas Klausner <wiz@NetBSD.org>
Date: Sun Aug 10 11:04:51 2014 +0200
Add 2560x1440 to supported resolutions.
Native resolution on iMac 27".
Reported missing by Benjamin Lorenz in
http://gnats.netbsd.org/49094
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
commit ab5be2312023d8ccc7156a05ccc1b0abe7679244
Author: Adam Jackson <ajax@redhat.com>
Date: Thu Dec 4 10:35:04 2014 -0500
saa: Adapt to GC client clip changes in xserver 1.17
1.17 always stores the client clip as a region, so there's no longer a
clientClipType member to look at. Change the code to just inspect
whether the clientClip is non-null, since that works both before and
after 1.17.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 3f7defa8dc595342e2502206ed2006f2be20a884
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Nov 17 19:18:15 2014 +0100
vmware/vmwgfx: Make large Xv video blits cheaper
As screens grow larger, attempt to make large Xv video blits cheaper by
performing the color conversion and scaling in two steps:
1) Color conversion which has a 4x4 matrix multiplication shader is performed
to a bounce buffer the size of which is never larger than the source image.
2) Scaling is performed as a src composite blit to the destination image with
a simple copy shader.
This split is done only if the destination image is substantially larger than
the source image / bounce buffer
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
commit 4664412d7a5266d2b392957406b34abc5db95e48
Author: Stefan Dirsch <sndirsch@suse.de>
Date: Tue Oct 7 11:29:32 2014 +0200
xf86xv.h cannot be included without first including xorg-server.h.
Without this the build fails on systems with the latest glibc,
throwing this error:
In file included from /usr/include/string.h:634:0,
from /usr/include/xorg/os.h:53,
from /usr/include/xorg/misc.h:115,
from /usr/include/xorg/screenint.h:50,
from /usr/include/xorg/scrnintstr.h:50,
from /usr/include/xorg/xvdix.h:55,
from /usr/include/xorg/xf86xv.h:32,
from vmwgfx_overlay.c:38:
/usr/include/xorg/os.h:579:1: error: expected identifier or '(' before '__extension__'
strndup(const char *str, size_t n);
This is caused by HAVE_STRNDUP not being set (it is set from xorg-server.h),
causing os.h to redefine it.
Signed-off-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 8e1c4e5bd521ec2d4f1a21da432f110c606b3fde
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Sep 22 12:09:13 2014 +0200
vmware/saa: Fix saa_check_poly_fill_rect_noreadback v2
We were not clipping the dirty region correctly, Fix this.
Also actually do what the comment in the function says: If there are more than
an ad-hoc number of rectangles to read back, then revert to the default
saa_check_poly_fill_rect function that reads back the whole damage region.
v2: Fix commit log message.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c23fd33d8ce8491891255d93c04e053bf333bd4e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Sep 22 11:43:02 2014 +0200
vmware/saa: Fix saa_check_copy_window dirty region v3
The saa_check_copy_window could dirty regions that were never touched, since
we were using the X server provided damage region rather than the more
detailed region actually copied. This would have been OK if we had first done
a read-back of the region to be dirtied, but since we want to avoid that,
instead compute the detailed destination region and use that for dirtying.
This fixes rendering glitches seen with motif applications.
v2: Fix whitespace error.
v3: Move dirty region computation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f86434ac69bd288c7fba65d178c22a91a0f4f6c2
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Sep 15 15:13:53 2014 +0200
Revert "vmware/saa: Disable the noreadback polyfillrect optimization"
This reverts commit 88c487cb19aaf2882d582f7f887a52935ef8d92e.
While the commit made the rendering artefacts less frequent, they didn't
disappear completely and are likely caused by something else, so revert this
commit.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Sinclair Yeh <syeh@vmware.com>
commit 8545a166931617af0d2a9ca8175fd8b11c67e246
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Sep 9 01:59:07 2014 -0700
vmware/vmwgfx: Fix cursor problem with multimon
In a multimon environment, the cursor would sometimes disappear on the
newly enabled screen. Fix this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 32562129750077a23f26f2e69adc8403eb24bf3f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Sep 3 07:08:41 2014 -0700
vmware/vmwgfx: Don't add pixmaps to the pixmap list if they're already on it
This could cause loops through the list to spin indefinitely.
This would most likely occur at VT switches.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 8b6316a312689d83ca8f8de939698bc137206f58
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Aug 28 15:32:45 2014 +0200
vmware/legacy: Fix overlay related compile breakage on earlier X servers
Introduced by commit:
vmware/legacy: Apply same fix to auto colrkey fill
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 8a47e9a45036005d46a60cf8df366baffcb9a8d1
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Aug 28 13:43:03 2014 +0200
vmware: Fix bootstrap related compile errors on earlier X servers
Introduced by commit
Add support for XSERVER_PLATFORM_BUS
Note that the vmware DriverRec declaration can be cleaned up
considerably using C99 designated initializers. Perhaps something for
the next release...
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f5d8c8f1fe2de727018600f471b6a8829fe492ad
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Aug 20 13:02:58 2014 +0200
vmware: Clear the PITCHLOCK register if available before modeset
In some situations the fbdev driver may have set this register before legacy
driver startup causing a weird-looking desktop. Make sure this register
is cleared on each modeset.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit b1697434348799b0808a6c9e9a899394075b980c
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Aug 14 16:42:05 2014 +0200
vmware/legacy: Fix out of bound array indexing
Spotted by coverity.
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 0825d98744b20a20af7bd81d347334ab4a1de015
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Sat Aug 9 00:19:17 2014 +0200
vmware/vmwgfx: Fix compilation issue on older X servers
Introduced in 268307 "Add support for server managed fds"
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit 0a212afefd8670a1823c9b6474de8bf26d33bdeb
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Fri Aug 8 21:37:38 2014 +0200
vmware/legacy: Fix uninitialized values in video commands
Fixed bug where video stopped working on systems that didn't have the new kms
enabled kernel driver installed. Found on CentOS 6.4.
After updating the register header SVGA_VIDEO_NUM_REGS value got upped by two
in order to support GMR and Screen Objects. Since this path is mostly used
on older hosts that may not support them, don't send them at all.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit 0a596fd0c92fdcf73071869a59029263a2596018
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jul 2 14:21:45 2014 +0200
vmware/vmwgfx: Fix an error path segfault
Part of freedesktop.org bugzilla bug #80645
If taking a scanout reference on a pixmap fails, the
struct vmwgfx_screen_entry::pixmap pointer must be set to NULL, otherwise
the driver will incorrectly attempt to remove the scanout reference in the
error path, causing a segfault.
This problem is seen in the above-mentioned bug, but it is not the root
cause of the problem. With this patch applied, the server will terminate
cleanly instead of segfaulting.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 4e378a730d2d2deffc915af2a3d013d2a994a1b0
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed May 21 11:52:29 2014 +0200
vmware/legacy: Apply same fix to auto colorkey fill
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
commit 82c9b0c1d34459c568d004521e3f35a69f5d7ae3
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed May 21 11:51:46 2014 +0200
vmware/vmwgfx: Fix auto colorkey fill usage
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
commit 43e043868fbd74e28cd392a3665b36abdfe87de0
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed May 21 11:54:48 2014 +0200
vmware/vmwgfx: A bit more error logging when handling cursors
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
commit aa7309254808e27a4ac5d3dc674be179646280b5
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed May 21 11:54:24 2014 +0200
vmware/vmwgfx: Don't move cursors without images
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
commit e8d6facf34adf1c601a3afd0a984ce90ad8fe059
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue May 20 06:29:19 2014 -0700
vmware/vmwgfx: Fix xwayland build on newer XA versions
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 268307e85c06be27345a6808bcf2b3c9887bf8bc
Author: Hans de Goede <hdegoede@redhat.com>
Date: Tue May 6 16:33:21 2014 +0200
Add support for server managed fds
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 675fe58eee8acdb302c3501236b86a3289991053
Author: Hans de Goede <hdegoede@redhat.com>
Date: Tue May 6 16:00:50 2014 +0200
Add support for XSERVER_PLATFORM_BUS
This is a preparation patch for adding support for server managed fds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 88c487cb19aaf2882d582f7f887a52935ef8d92e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri May 9 09:35:59 2014 +0200
vmware/saa: Disable the noreadback polyfillrect optimization
It causes rendering artefacts with some motif applications due to
damage area confusion. Until that is sorted out, temporarily disable the
optimization.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f31eed4a578784329a7038aa01acaa10a2d0c246
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu May 8 09:24:04 2014 +0200
vmware/vmwgfx: Fix initial dirty region for pixmaps
When storage is attached to pixmaps for the first time the dirty region is
set to cover either the hardware surface or the software buffer based on
the presence of the hardware surface.
However, if the storage was created as part of an accelerated operation,
the dirty region was assigned before the hardware surface was assigned to the
pixmap, causing the dirty region to incorrectly cover the software buffer.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 1ed14687a3f1092db8504fb9cf4f446451801665
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Apr 10 14:05:24 2014 +0200
vmware/vmwgfx: Set desired modes after xMir screen init
While XMir does initial mode configuration, it leaves setting initial
modes to the DDX driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit 64e0faf1480663a990e0f6aeef7af0e69845af49
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Apr 2 14:05:23 2014 +0200
vmware/vmwgfx: Don't tell XA that we have a mask when we haven't
In some cases, the X server sends us a composit operation with
mask_pict != NULL, but mask_pix == NULL. Assume there's no mask
involved in that case.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit c062d08a50a26c99a3b8f565a8b2b00e8dc21c3f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 16 18:27:57 2014 +0100
vmware/vmwgfx: Don't change backing-store of active scanout surfaces
With option "HwPresents" on, the driver would sometimes change backing
store of active scanout surfaces, making the kernel module refuse to
present. This was caused by scanout surfaces not having the RENDERTARGET flag
on by default. So when rendered to, using copies or composites, they
would be reallocated. Fix this by adding the RENDERTARGET flag from start.
Also add code that prints out an error message when we change backing store
of active scanout surfaces
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c42e1f750629f18144d065b8bba5e2eaf6cbf675
Author: Julien Cristau <jcristau@debian.org>
Date: Tue Apr 1 10:11:13 2014 +0200
configure: fix build without xatracker
ACTION-IF-NOT-FOUND is the fourth argument to PKG_CHECK_MODULES, not the
fifth.
Debian bug#743239 <https://bugs.debian.org/743239>
Reviewed-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit cbd56b3759f01ec18ae0705d023e4c0b2ab38c25
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed Mar 26 12:45:52 2014 +0100
Bump the version number to 13.0.2
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 51cdfa6f5102bde92c98630ace6650e4b286f6e2
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Fri Feb 21 18:10:07 2014 +0100
vmware: Fix compilation on newer X servers
Found by Bryan Lee. Later versions of X.org turns dispMode pointers
into const upsetting gcc, turn them into size_t's instead.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 8da981712f62050076cff53e1b40ed1e307fcca8
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jan 15 11:04:05 2014 +0100
vmware/vmwgfx: Always allocate shared hardware surfaces.
Hardware surfaces are all likely to be shared at some point, and we *really*
don't want to change a hardware surface that is bound as a drm framebuffer.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 31bff9f7f3d9a68fd1449532e8ab50065de63857
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 9 13:53:59 2014 +0100
vmware: Require libdrm 2.4.38 to build XMir.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit d6b179a5addef6456325adf241eb8dcaf8e4c3d6
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 9 13:28:22 2014 +0100
vmware: Fix build errors and warnings
A previous commit and the hosted merge unfortunately brought in some build
errors / warnings on early X servers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f37684e7169b9c0ab23ff748d5acacb65fad82f7
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Jan 7 17:55:49 2014 +0100
vmwgfx: Block DMA to prime surfaces for now
Since there is currently no _good_ way to get the surface format of a
prime surface, we block DMA to these surfaces; we don't know if our
software data is compatible with the surface format.
This patch also makes sure that there is a hardware surface backing the
drawable we copy from.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 97ce302ddd6e86397ea56ea9089b9549af73c3ac
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jan 6 12:37:36 2014 +0100
vmwgfx: Enable direct dmas
Enable direct dmas instead of using the xa-provided dma functionality.
This saves a bounce-buffer software copy of all dma'd contents.
This also implies that all drawables with mixed software / hardware contents
will use a kernel buffer for software rendering.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
commit fd636e39a3f32a6dcd107c370513d8cb9aae26c2
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 16 06:21:09 2013 -0800
vmwgfx: Add support for XWayland
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c020923597d3bc30dffa89ba0a47f3b9517dd5fb
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 16 06:13:25 2013 -0800
vmwgfx: Add support for XMir v2.
Use the hosted infrastructure to add support for XMir.
Helpers go in vmwgfx_saa.c.
v2: Added comments for the helpers, and added a
vmwgfx_flush_dri2 to be executed when coming back from vt switch.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c8e1c498431b1f8758f62c94131c302cf3d07b39
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 16 06:05:35 2013 -0800
vmwgfx: Add an infrastructure to be able to run hosted under a compositor v2
Figure out what's needed both for XMir and XWayland and make a common
driver structure out of it.
v2: Added a lot of comments. No code change.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f45a551e9b70ccec8f92df02747d4e2af299cf8c
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 16 10:38:21 2013 +0100
vmwgfx: Fix compile breakage on XA version 1.
A recent revert brought back code that assumed XA version 2.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: trivial
commit 93228f3dd3355a25583d22dbb96791678b93be3e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 11 06:54:02 2013 -0800
vmwgfx: Really allow XA version 2.
When XA starts to correctly advertise version 2, we didn't allow it.
Fix this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 4af6062ce281a7f4aaa50985fe757e9569208ee1
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 11 04:59:49 2013 -0800
Revert "vmwgfx: Get rid of device-specific DMA code"
This reverts commit 45b2457516a9db4bd1d60fbb24a1efbe2d9dd932.
Reverting this because using direct DMA for shared pixmaps should
boost performance. It should be usable both in a composited environment
and when running hosted. Need to retest the DMA flaws I saw before disabling
this code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c36cbcefb8526944141eb431e1e736dc4485a36e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 9 00:19:55 2013 -0800
vmwgfx: Remove stray 1
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit a40cbd7b4fa19219849b4b0a48f07538772c3e22
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Dec 5 02:58:47 2013 -0800
vmwgfx: Support also XA version 1 v2
We need to support also XA version 1, since we want to be backwards
compatible with older mesa releases.
Unfortunately, the intended way of detecting XA major version at
compile-time was broken on mesa 10 so we need a workaround that tests
for XA version 2 at config time.
v2: Update the test for XA version 2.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 7ac45326eccbf3bea9a4a8f95b9662a36ab58eb0
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Nov 28 02:02:20 2013 -0800
vmwgfx: Fix some compilation warnings and indentations
Most of the compilation warnings we're seeing are due to bad xorg headers,
but fix the ones we can fix in the driver. Some indentation fixes as well.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit e26dec8f5278df74a102493bf6d2d8444dab5d6d
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Mon Oct 28 18:21:29 2013 -0400
vmwgfx: handle changes of DamageUnregister API in 1.14.99.2
Fix is inspired from the intel driver.
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 45b2457516a9db4bd1d60fbb24a1efbe2d9dd932
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Sep 19 21:50:40 2012 +0200
vmwgfx: Get rid of device-specific DMA code
It's rarely used and things seem to work well enough on top of XA.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
commit 7192acf9f0bf8e7176ab0b803b861a858623f709
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Sep 19 20:36:57 2012 +0200
vmwgfx: Implement textured video completely on top of XA.
Remove device-specific hacks. This may increase resource usage a little
on old hardware revisions, but we don't need separate code paths on
different hardware revisions.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
commit 835ce4698f916ba080f4132988fd4caf898e0b1e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Sep 26 01:25:33 2013 -0700
vmwgfx: Avoid HW operations when not master
Note that for DRI2, a dri2_copy_region becomes a NOP when not master.
Additionally, all dri2 operations that lead to a potential kernel
access will return FALSE.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 0945bea5fc32eacb7bf42639efbd45dcd43e7ab5
Author: Rob Clark <robdclark@gmail.com>
Date: Mon Jun 10 13:31:31 2013 -0400
vmwgfx: update for XA API changes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Tested-by: Jakob Bornecrantz <jakob@vmware.com>
commit b3345886332ee2b9fd1348dc2cd36257dfd71986
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed Apr 17 12:03:32 2013 +0200
Bump the version number to 13.0.1
commit d13a6334fe76f4e869b2cb8c0a6a13c185b1bedd
Author: Loïc Yhuel <loic.yhuel@gmail.com>
Date: Thu Apr 11 11:29:10 2013 +0200
vmwgfx: Use myGlyphs to fix crashes
Tested-by: Christian Hesse <mail@eworm.de>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 23d87c92b7211cc5249eefe4ab3a2c7f370e279e
Author: Zack Rusin <zackr@vmware.com>
Date: Thu Feb 14 14:33:01 2013 -0800
Kill mibstore
It was a noop for at least 5 years and it has been removed.
Signed-off-by: Zack Rusin <zackr@vmware.com>
commit 686859fba16ed2616c38bbe5d4e38abf4c5b7ae9
Author: Zack Rusin <zackr@vmware.com>
Date: Tue Jan 15 12:05:45 2013 -0800
Bump the version number to 13.0.0
New abi and various fixes
Signed-off-by: Zack Rusin <zackr@vmware.com>
commit adf375f3d400e51b1e445e89de6bd82be0bb4ef3
Author: Zack Rusin <zackr@vmware.com>
Date: Thu Dec 6 16:40:13 2012 -0500
xf86-video-vmware 12.0.99.901
Internal release for a round of QE testing
Signed-off-by: Zack Rusin <zackr@vmware.com>
commit 007bed30270ca9548dfe6e359972b56cbb8e2f13
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Tue May 29 23:01:14 2012 +0200
vmwgfx: Guard against null rotate pixmap in shadow destroy
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit e5ac80d8f72963313358e31cfb1ab98583e26f23
Author: Dave Airlie <airlied@redhat.com>
Date: Tue Jul 3 13:50:30 2012 +0100
vmware: avoid warnings about shadowing 'i'
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 46c0862d205eefa985e36a74391ca392640cb898
Author: Dave Airlie <airlied@redhat.com>
Date: Sat Jun 16 14:43:52 2012 +0100
vmware: drop infoFromScreen inline in favour of new interface
This also should fix the build regression introduced with the fix
for this macro.
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 50c01998c7800bc02fd6656cc14efa715bf63e08
Author: Robert Hooker <sarvatt@ubuntu.com>
Date: Fri Jun 15 11:56:59 2012 -0400
vmware: Fix up some warnings after new compat API change.
Fixes multiple instances of these warnings on x86_64:
../../src/vmware.h:180:5: warning: implicit declaration of function 'xf86ScreenToScrn' [-Wimplicit-function-declaration]
../../src/vmware.h:180:5: warning: nested extern declaration of 'xf86ScreenToScrn' [-Wnested-externs]
../../src/vmware.h:180:5: warning: return makes pointer from integer without a cast [enabled by default]
Function `xf86ScreenToScrn' implicitly converted to pointer at ../../src/vmware.h:180
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Robert Hooker <sarvatt@ubuntu.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 61df95a86f4997e342d50d7779b00aba2e8849a6
Author: Dave Airlie <airlied@redhat.com>
Date: Wed Jun 6 09:58:01 2012 +0100
vmware: port vmware driver to new compat API
This is a port of the vmware driver to the new compat API.
Tested-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 46cdf0ed0ad9df66f36f95e27b209d454f67d526
Author: Brian Paul <brianp@vmware.com>
Date: Fri Apr 20 14:24:26 2012 -0600
vmwgfx: set the XA_FLAG_SHARED flag for composite dest surfaces
This fixes a failed assertion in the gallium/svga driver in the
svga_texture_get_handle() function. The texture resource wasn't
getting created with the PIPE_BIND_SHARED flag so the !cachable
assertion would fail and the X session would abort. This didn't
happen with release builds.
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 4d76cfe5e8e5d594ec357b0ef3339f56eeca9c64
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Tue Mar 20 22:05:30 2012 +0100
Bump version number for the release
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit c6f27561c7cf7c30f89493d64e3c5694b5f53469
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Mon Mar 19 14:53:34 2012 +0100
vmware/legacy: Fix crash on Xserver 1.12.0
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
commit b70116b907aa8545f0275589a52275235083bb40
Author: Zack Rusin <zackr@vmware.com>
Date: Thu Mar 15 11:37:26 2012 -0400
Fix a memory corruption due to a redundant free.
We use the empty rect purely as a placeholder and never
initialize it with its own memory so lets not try to free
it.
Spotted by Dave Airlie.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 57f1204292a116b35d5930752bc06f9065332879
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Tue Mar 13 21:41:11 2012 +0100
Bump version number for the release
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit e585f9ea04bbd17398d2fa804be38a4e75bc60e4
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Mar 13 09:44:46 2012 -0400
config: move AC_SYS_LARGEFILE in autoconf init section
There is no need for this statement to be conditionally included.
It adds support for large files without taking anything away.
http://www.gnu.org/software/autoconf/manual/autoconf.html
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 04169f3860e4a7d03485631bee40c05fc45b72c6
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Mon Mar 12 14:51:38 2012 -0400
config: include saa and vmwgfx subdirs in the tarball
Use AM_CONDITIONAL. Automake knows what to distribute.
It needs to be able to navigate down the subdirs to find what
needs to be included in the tarball.
To test reliably, create a tarball and expand it into a separate
directory and build with xatracker. Distcheck will not detect
missing code when such code is configured not to build.
The content of a tarball *must* always be identical, regardless
of the configuration options used or on which platform it was configured.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit e6836ff099e5565dea58a53bba9b2df377241ef7
Author: Zack Rusin <zackr@vmware.com>
Date: Thu Mar 8 09:55:07 2012 -0500
Bump version number for the release
Signed-off-by: Zack Rusin <zackr@vmware.com>
commit c5c38bab8c493985349356be5fadc14d3aee8040
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 8 15:00:20 2012 +0100
vmware/legacy: Fix initial mode size v2
Commit "vmwlegacy: Make the default be a minium of 800x600..."
read the dimensions from the incorrect register pair.
v2: Also treat initial widths and heights larger than the maximum
values as an error and revert back to the minimum.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 49b4cbc5100ce9a4cc40132c2839f9401a58b92e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Feb 6 19:48:57 2012 +0100
saa: Try to avoid readbacks during polyFillRect
This significantly improves performance of shaped windows on top of 3D
contents
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
commit ecf6c5b1081e70ec64132a8188c8cc15945c2290
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Feb 2 10:24:26 2012 +0100
vmware: Kill warnings on Xserver 1.12
Compile-tested on servers 1.0 through 1.12.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 3e18d43c7f8ab5dcb94ac285a687eaaa1a578250
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 1 17:30:52 2012 +0100
vmwgfx: Kill a deprecation warning on server 1.12
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit bfb286bea967c26426aebda2a581f35da0d86884
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 1 17:25:19 2012 +0100
vmwgfx: Fix up swap[sl] for server 1.12
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 8ff19c2b2f288d6851b444dbda39544980837b73
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 1 16:59:13 2012 +0100
vmwgfx: Avoid including a library header and use pixman for type conversion
The PictTransform type is a typedef of a pixman type.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 193b5118199028ea0180785bb3f4c8a16359b8b0
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jan 13 17:01:02 2012 +0100
Bump version number for release
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c5af120177949c82cbd0611da565fef9c2c829cb
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jan 13 17:14:47 2012 +0100
Make the driver build pass "make distcheck"
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit e6d03aceb1195de0b490f39024f34a33b1a8f6fc
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 12 14:00:41 2012 +0100
vmwgfx: Adapt to new XA version number v2
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 59435d2d3af8a9f64ee40eac4f0479470ba6badf
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 12 17:57:37 2012 +0100
vmwgfx,saa: Fix a bunch of compilation warnings
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 0628ad20f31a239f99fcbbfe42197c56a5ae8864
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Fri Dec 9 07:34:58 2011 +0100
vmwlegacy: Make the default be a minimum of 800x600
This patch and the corresponding vmwgfx patch formalizes both drivers
on the same behviour. The minimum is 800x600 (unless the max size is
smaller). This makes it unnecessary to check against VRAM size since
it is always at least large enough to fit the max values.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 8ddbb3216d29b2ecd336d50461216feef0900fd9
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 12 10:00:41 2012 +0100
vmware: Make sure the driver builds on old servers
Move things around a bit so the driver compiles with
servers back to Xserver 1.0.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 194ff6f1517d0a8250e64c3d768a9b7ae9ed3140
Author: Thomas Hellström <thellstrom@vmware.com>
Date: Wed Jan 11 14:49:56 2012 +0100
vmware: Update Manpage
Update the Manpage with new options and a brief modesetting- and 3D
description.
Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit b5546fb1de3f3859151a91e98ab0bd24b6789e2e
Merge: abf9cb7 5748c33
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 19 20:25:43 2011 +0100
Merge branch 'vmwgfx_branch'
commit 5748c33535bc7d3009b9758653885e6ae0e73002
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 14 12:38:27 2011 +0100
saa, vmwgfx: Fix saa_copy_composite
The traditional accelerated copy methods aren't format aware.
Make saa copy format aware,and pass formats on to the driver copy function
if available. If the driver can't handle format conversions it needs to
return FALSE.
This fixes format confusion in the copy composite fastpath.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f664e31d73bd31594e069d8bcca872687b84d8d9
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 14 10:22:22 2011 +0100
saa: Always read back hw contents on poly_fill_rect
The damage region may be much larger than the actual area
filled, so make sure we read back any hw contents in the damage region
since we use it to mark sw dirty.
Revisit this in the future since it may increase readbacks in an
undesired way. There are workarounds.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 0eef22437093d29f572abea845fff9c03fca5e4e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 14 10:18:16 2011 +0100
saa: Only try to accelerate pixmaps that are driver pixmaps
Trying to accelerate scratch pixmaps doesn't work currently,
and I'm not sure it's a big benefit either.
This is in line with what EXA does.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrants <jakob@vmware.com>
commit afd2f828b8a8b2ccc6ebe4d56104db3d03d08493
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Dec 8 13:14:57 2011 +0100
vmwgfx: Reduce system resource usage with textured video
Use U and V textures and corresponding dma buffers that match
the size of the input UV data rather than using textures and DMA buffers
that match the Y data. This simplifies data copy and reduces the amount of
image data transfered to the host by up to 50% (YV12).
It also reduces dma buffer- and surface memory usage correspondingly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 121dba0093d24eb0aefa3d27a22f05f85ac66f72
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 7 20:19:34 2011 +0100
vmwgfx: Hook up XV color conversion control attributes
This enables the standard XV color conversion control attributes
contrast, scaling, saturation and hue.
Currently the attribute change takes effect on the next image only.
If we ever implement a ReputImage callback, we can use it to update
the image immediately on attribute change.
The attribute ranges follow those used by the proprietary Nvidia driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 8bdc6004d34e274d815bb3f3e0aa223085ea848c
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Dec 7 14:17:45 2011 +0100
vmwgfx: Adapt to new interface of xa_yuv_planar_blit
Also make it easier to modify the color conversion matrix based on
yuv encoding properties.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit dba7b865d36ebe06b54987176b1a83cdbc2f846a
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Dec 6 10:00:00 2011 +0100
vmwgfx: Fix MessageType members that are incorrectly typed as Bool
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 2c438ad8b82f47ac3252403052df16655184acbd
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Dec 6 09:53:16 2011 +0100
vmwgfx: Add an option to enable rendercheck mode
Rendercheck mode is used to enable acceleration of all supported composite
operations, regardless of the current data location. The mode is off by
default, but could be turned on to test the hardware composite operation
implementation. Due to excessive data migration, rendercheck mode will be
slow.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 1736a76246f0a0dab01f5a1066332168d34b2803
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Dec 6 09:21:25 2011 +0100
vmwgfx: Adapt to the dri state tracker sending depth instead of bpp
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit fb35176958bba2f86d6d466ccb7baadcff806512
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Dec 5 20:58:45 2011 +0100
vmwgfx: Don't register back buffers as "hw_is_dri2_fronts" v2
That is reserved for dri2 front or fake front pixmaps that need
immediate flushing of software contents to hardware.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 3c2486e05e98f2ff8f4e3d2633d91e14140a676e
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Dec 1 16:47:41 2011 +0100
vmwgfx: Include drm.h from correct path
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 995d86ceb0ae8cf2904100405ba6710c89f7f1b7
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Nov 28 14:51:36 2011 +0100
vmwgfx: Make the drm device name persistent
The DRI2 code doesn't copy the device name, but assumes the storage
is persistent.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
commit 08ca819238f2c2a0494b0bd8452393fc62907cc1
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Nov 25 14:38:45 2011 +0100
vmwgfx: Get the drm device name from the open file descriptor
Rather than hardcoding it.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit d7576c2c50dd0f3b7f70f97d9bde4e8b859e89e5
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Nov 25 11:27:26 2011 +0100
vmwgfx: Use config options to optionally set GUI topology
Use option "StaticXinerama" or "GuiLayout" to set initial GUI topology,
similar to how these options are used with the legacy driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 22d3e58b8810a73c4818d4d3943776a387147b83
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Nov 23 11:02:00 2011 +0100
vmwlegacy: Factor out code that can be common for vmwgfx and vmwlegacy
In this case it's the parsing of the gui / statix xinerama topology.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 2e8aac7031a83f507169f6fe42924c51bdaf7326
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Nov 23 10:49:33 2011 +0100
vmwlegacy: Accept option "GuiLayout" as a synonym for "staticXinerama"
It's more user-friendly and in line with what it's being used for in the
vmwgfx driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 31e80b2a609631d85341025d7f2d0fb818f386f5
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Nov 25 09:42:16 2011 +0100
vmware: Update library dependencies
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit da29c648051208b98704860f851564a80bd3b123
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 22 21:06:24 2011 +0100
vmwgfx: Pre-init fixes
A bunch of fixes that makes the fallback from vmwgfx to vmwlegacy easier.
1) Allow only 16 and 24 bit depths with vmwgfx. We may revisit this later.
2) Try to reclaim some resources if pre_init fails.
3) Print error messages so the user understands what happens on fallback.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit e52b1505cfc4a7d0507e14c3b6335a9b9652c50f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Nov 25 09:15:32 2011 +0100
vmware: Update the vmware register definition
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 1c77e3d7434f04c59233ce7e497a949e386e1630
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 22 19:56:20 2011 +0100
vmware: Hook up vmwgfx to be tried before falling back to legacy
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 2aa256c96496ed6dd9dbd5880c278f4422500b0f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 22 18:37:44 2011 +0100
vmwlegacy: Factor out bootstrap functions
Preparing for choosing driver path in preinit instead of using
shim loader.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit abf9cb75630cb27bb4741d194cb23014fe3d09b1
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Nov 17 16:38:22 2011 +0100
vmwlegacy: Fix up Xinerama / panoramiX replies.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit be23efbc91f47a6a34fbe24f167ee29fdf58f541
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Nov 16 10:23:10 2011 +0100
vmwlegacy: Fix device fifo communication
This fixes two issues with the device fifo communication:
1) Idle the fifo before initializing it. If the fifo is already up and
processing data due to an uncleanly shut down server, and init could
otherwise confuse the device.
2) Mark fifo memory volatile when writing to it and make sure commands
are written before telling the device they are available.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 70487eee975c63b5ed1492927bbc661425278276
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Nov 9 11:34:16 2011 +0100
vmwgfx: Make sure we don't render when VT switched
When compiz is enabled, we may try to DMA sw rendered contents of dri2
drawables to surfaces while VT switched. I'm not sure how this could be
happening, but queue the DMA until the next block handler.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
commit e1810e0b09e07bdab05a57fdef74450a507e9dfa
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 8 15:28:40 2011 +0100
vmwgfx: Fix rendering errors when rotating / unrotating a screen.
The dirty trackers weren't correctly translated to
pending presents / updates when a pixmap was bound as a scanout.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrants <jakob@vmware.com>
commit d0b493d67afd1b5e8c8397c7938752ecd56c91ba
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 8 14:49:36 2011 +0100
vmwgfx: A number of damage fixes
A damage tracker was sometimes attached to a pixmap in the middle of an
operation. That meant that damage was never registered for that operation
which caused dirty-tracking to fail. Instead, add a damage tracker as
soon as we have storage attached to the pixmap.
Also, when a pixmap was resized, the dirty region trackers could become
stale, and cause DMA operation extending outside of the pixmap with
server crashes as a result. This commit fixes that.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit aff799d007c8383321213ad177e5a9deec2b3978
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 1 15:39:07 2011 +0100
vmwgfx: Add an option to use a scanout surface
With this option enabled, we compose all contents (both sw and hw) in
the guest before presenting it. Just like the old xorg state tracker did
when 3D was enabled. It's not as bad as the old xorg state tracker was for
interactivity, but there's a small but noticeable lag when moving windows.
It's mainly intended for testing purposes, like testing the surface
dirty paths in the kernel module.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 5137e8736edfab1aaebef4046baab37361584b2e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 1 09:59:18 2011 +0100
vmwgfx: Be correct when setting up damage tracking
When setting up damage tracking, previously the code would guess wether
sw or hw was currently dirty. The caller always have that information,
so pass it to the damage tracking setup function.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit ed7bba3cda4b454eec771d3bf0ebed4fd998a82a
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 1 08:38:52 2011 +0100
vmwgfx: Add an option for direct presents
With this option set to true, accelerated copies to a scanout pixmap will
be performed as hardware presents instead of copies to an intermediate
3D surface backing the scanout pixmap, followed by a present.
Depending on the application this might be a performance boost, but since
it might trigger device software readbacks in other situations, for example
dri2 copy front->fake_front, it might be a performance hog in other situations,
so disable it by default. (Before this commit it was enabled by default).
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit b2c4a7e682e14fa8af42415d429d6735117fefcb
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Oct 31 15:14:21 2011 +0100
vmwgfx: Fix acceleration options.
Introduce relevant acceleration options and fix up the log printout.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
commit da85719e9e373ee8da53388cccc71a0f9c8bbefc
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Oct 31 14:40:55 2011 +0100
vmwgfx: Remove a couple of unused options
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
commit b6faecc7613e8c73f0681d20a1a80e5e0ddd4058
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Oct 31 14:27:29 2011 +0100
vmwgfx: Don't do present readbacks per crtc
The kernel now takes care of doing this the right way;
no need to duplicate that functionality.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit cc7c1c961b77c139b95fbb6948204def1b4b908a
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Oct 31 10:50:09 2011 +0100
vmwgfx: Fall back to sw cursors if needed
If there is a risc that we need two simultaneous cursors,
(two outputs showing the same contents, at least one of them explicit),
fall back to sw cursor.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 427064b57c52c8881c7a64d9c9e21411e79e644b
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Oct 26 16:33:30 2011 +0200
vmwgfx: Fix crtc position of transformed fb
The fb allocated for transformed data always matches the scanout region,
so set the crtc origin to (0,0)
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 55113dae7cbe99bfb69869831536ff34ed445c73
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Oct 26 15:08:18 2011 +0200
vmwgfx: Hook up vmwarectrl to the gui layout ioctl
Requires drm 2.3.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit c73a7f3d991dd95d332829f2ca8a88aabfea5a46
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Oct 26 07:28:31 2011 +0200
vmwgfx: Update the connector type name array
Also map connector types that are not in the array to "Unknown".
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit a33710b0d16c9c01a1995b60f0b0d4d482f459d3
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Oct 21 11:19:36 2011 +0200
vmwgfx: Save the dri2 requested depth since it may differ from the drawable
depth.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit 4c08c2600936efeedb1a33436876ba82a11218e7
Author: Jeremy Huddleston <jeremyhu@apple.com>
Date: Fri Oct 7 13:15:11 2011 -0700
Build fix for ABI version 12
This results in the vmware driver assuming there is only one PCI domain,
which I think is true for everywhere this is expected to run anyway.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
commit 208ccbc7179b40a570a5943e325dd22740a67577
Author: Jeremy Huddleston <jeremyhu@apple.com>
Date: Fri Oct 7 13:10:59 2011 -0700
Fix build failures resulting from changes to the swaps and swapl macros in recent xorg-server
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
commit de70a1d0cb79dad9e52baa43306264db80a163da
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Oct 5 13:33:17 2011 +0200
xf86-video-vmware 11.0.99.901
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 26845eb54a15d43f09288a87c5f74beac8fb6ec7
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Tue Sep 27 19:31:22 2011 -0700
Use dixLookupWindow instead of LookupWindow on Xorg 1.5 & later
The LookupWindow function was deprecated in xserver commit ed75b056511ccb4
and removed during the Xorg 1.11 merge window by commit 82a8677d9175732.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 5c43481aa639053bbbf7fbf5f72f0edecf616731
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Sep 1 13:59:10 2011 +0200
vmwgfx: Adapt to vmwgfx kernel driver 2.1
This introduces fence objects with 2.0, and present / present readback
ioctls with 2.1.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit b5438423ad29338429321cd29118a66b715cdcac
Author: Matt Turner <mattst88@gmail.com>
Date: Sun Sep 25 14:06:47 2011 -0400
Fix wrong-sized swaps
Signed-off-by: Matt Turner <mattst88@gmail.com>
commit 3c2f9cc43f7d36952e78d10d224da0ba68ecefea
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Aug 30 12:22:53 2011 +0200
vmwgfx-xorg: Avoid enabling unwanted outputs in initial configuration
Add a hack so that we avoid enabling all connected outputs during the
initial configuration. On older X servers they would be enabled as cloned,
which didn't really cause any problem, but on later X servers they would
initially be enabled next to eachother which looks odd.
A RandR call will still show the disabled outputs as connected, and if there
is a monitor section in the config file for the output in question,
it will also have a connected status, so that it may be explicitly enabled
or disabled from a config file.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
commit f17abaa926fdbedab1e6236e109fa746fcc2320b
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed Jul 13 16:30:01 2011 +0100
vmwgfx: Just include vmwgfx_drm.h
We do this in mesa as well
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit b29d71e3adb16f2a8e3e9d534bf8b1c1f8e0d9ef
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Wed Jul 13 16:28:52 2011 +0100
saa: Remove superflouos headers includes
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 98ff64fd7a13d2824d6f36b0d8f13d95f8be9e48
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Mon Jul 11 12:23:32 2011 +0100
vmwgfx: Fix logic when checking for XA
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 858dbcdddb35b690a543a103d43dcaeb040260c1
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Sat Jul 9 22:54:41 2011 +0200
vmwgfx: Don't dirty the front buffer as hw when doing a dri2copyregion from it
When copying from a dri2 buffer we usually dirty it as hw, since dri has
been rendering to it, and there can only be hw contents in the buffer.
However for the real front, X has already done the dirty work for us.
Also remove a glxWaitX() debug message.
This should fix piglit read-front.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit eea96a6f5ccc6a3a1e2bb2737f211076de443462
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jul 7 22:02:15 2011 +0200
vmwgfx: Add boolean flags for different rendering modes
Basically we support three ways of getting data to the screen:
1) Mixed mode: We mix presents and updates.
2) Mixed present optimized: A version of mixed where copies to the front
buffer end up as presents, saving a blit.
3) 3D surface mode: We only present from a 3D surface. Software contents are
first DMA'd to that surface.
This change adds boolean flags to the saa struct to select which mode to use.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 9cff0a84308723d9790c6365c0d4b1c107794995
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jul 7 09:21:56 2011 +0200
vmwgfx: Various acceleration fixes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 4ae8aac35b7209576eaeb64347470d3145b27832
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jul 4 15:39:02 2011 +0200
vmwlegacy: Fix server termination due to pitch inconsistency.
Don't require a 32*32 bit pitch alignment when validating modes, since the
requested virtual pitch (pVMWARE->maxWidth*bpp) must be a multiple of that
alignment. If not, the server will terminate with a cryptic error message.
This is only for validating modes. The driver will adjust the pitch to the
host requirement when a mode is set anyway, and hopefully the host won't
require a pitch it doesn't support.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 81e7099b6bbd9fdae66a3186dfc3fff2758009cf
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jul 1 13:23:30 2011 +0200
vmwgfx: Require libxatracker >= 0.4.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit d2e27ee5c116cd914d98c2ffa4a974704c250be7
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jul 1 12:29:50 2011 +0200
vmwgfx: Set up XA version checking.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 8a9997f060487c0aef07b8e8a95bb3a862de264f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jul 1 11:28:52 2011 +0200
vmwgfx: Try to sort out format handling with composite.
Try to catch all cases where we have to do readbacks or format conversions
due to composite formats not being compatible with ordinary accel formats.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 8a21da8eaa77bb1ec55ab8b5584554ae6cc41e1e
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jun 22 22:26:20 2011 +0200
vmwgfx: Support xa composite.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit c7e8388280fc047b33be4f603afa4b7615ffc585
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jun 22 11:33:14 2011 +0200
saa: Add driver composite.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit b2e116971031d1357f614e9ce1d843768489a304
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Jun 22 10:50:35 2011 +0200
saa: Reuse code for computing composite bounds.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 3650be74d5da602653b2b1d3cf3a6bb5a9cb3539
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Jun 21 00:13:32 2011 +0200
vmwgfx: Try to match created hardware formats with the dri state tracker.
commit 63d7ddb35fe8b6743de182b73e6967f97f6a7eba
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jun 20 21:57:38 2011 +0200
vmwgfx: Fix dirty present bug
Clear dirty present areas when new contents are drawn to the backing
pixmap. Not when it is actually pushed to the screen.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit f71928d3f78d9f9e5a0fd240069b9035d4ccac75
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jun 20 21:48:23 2011 +0200
vmwgfx: Don't call xa_copy_done after a present.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 4d5aec4a7e4512145c76014591488cb5a98ff0ea
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jun 20 14:13:46 2011 +0200
vmwgfx: Make present readbacks not cross scanout bounding box boundaries
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit f6a4690832143b01d419b52a4cb74350cdfa38bf
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jun 20 09:58:44 2011 +0200
vmwgfx: Make a list of scanout bounding boxes available to each scanout pixmap
This info is needed for present readback.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit eea0e6e242a604b1f4d85d947cf2b3f9f4977533
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon Jun 20 09:05:48 2011 +0200
vmwgfx: Import the WSBM list macros
Use WSBM list handling macros for the glxWaitX flush list.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit eabf82fad8ad72aab071cd4e3bc9063022b0aeb3
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jun 17 11:25:53 2011 +0200
vmwgfx: Check for large files
Fixes segfault on 32-bit servers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 7966dfa47c4d2b022ebf0f25a2db3901376e6cbd
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jun 17 08:18:13 2011 +0200
vmwgfx, saa: Build saa as a convenience library
instead of as a shared object.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit d28613e557fcdc4fc69f9a138a8c5fc909a719f5
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jun 16 21:21:25 2011 +0200
vmwgfx: Fix up driver build process for Xserver >= 1.7.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 84166d4b457244bcc2f5ace63702d594d602d0c2
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jun 16 15:55:07 2011 +0200
vmwgfx, saa: Initial import
This imports the vmwgfx driver, based on the Gallium3D Xorg state tracker,
as well as the saa library. A "Shadow Acceleration Architecture", which is
optimized for the case where transfers between system (shadow) and hw memory
is very costly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 0142bb8d10edb153c9ce79a2ea3ff92a7fb15ac5
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Mar 30 12:37:24 2011 +0200
vmwlegacy: Don't prune modes based on the virtual size of the default mode
We might be pruning modes based on the virtual size of the default mode in
some situations. Avoid this by allowing a virtual size equal to the device
max size, unless the user has requested something else.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
commit 04297d435b87e3d04a427ac8ef33d314727220e6
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Mar 30 12:22:43 2011 +0200
vmwlegacy: Fix up default mode VRefresh anc Clock calculation
The VRefresh value was a factor 1000 too high.
Calculate clock based on vrefresh and resolution.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
commit c5ca599361c87ec816db92d4f9841143f8601934
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Mar 30 11:01:06 2011 +0200
vmwlegacy: Fix a bug in screen dimension calculation
This bug resulted in incorrect screen dimensions and DPI being calculated
in some circumstances, leading to among other things bad aspect ratios in xine.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit c02d5977015983473a9bbae97ec65ce70a5faa3b
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Mar 29 13:03:39 2011 +0200
vmwlegacy: Make sure we draw the colorkey to the right drawable
Don't draw the colorkey to the screen drawable, but to the video drawable
when possible.
Also change the Xv API/ABI test to use the builtin ABI version
functions.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <daenzer@vmware.com>
commit b234d7d6925b480a9c4fe23e5100e6fe7e5c0eac
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Mar 29 11:18:24 2011 +0200
vmwlegacy: Silence a number of warnings
This potentially also fixes a use of an uninitialized pointer value, which
may cause OOM or segfaults.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <daenzer@vmware.com>
commit cdb04224db69a6b3beb66c99879e20917b8b0fb2
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Mar 25 19:17:00 2011 +0100
vmwlegacy: Fix segfault and setup of initial mode.
The fact that modes were added without names caused segfaults on older
X servers. At least up to and including Xserver 1.4.
Also, for some reason, at least Xserver 1.4 insists on setting the first mode
in the modelist, even if we set another mode as the current one.
Work around this by inserting a new mode with the current screen dimensions,
and add that modename last to the array of display requested mode names.
This means that if none of the previous mode names are found, we will at least
find the newly inserted mode.
Also, if there are no requested mode names at all, the driver previously
chose the largest mode that fit the timings. Now we will, in that case,
always select the newly inserted mode and thus not change resolution unless
specified.
Also add an option to not add this default mode. The option
"AddDefaultMode" is true by default.
Finally when we restore registers at exit and VT switch, make sure we
reprogram the initial width, height and bpp for the next time we start a
server.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 9a8f0af8782fd5e9de2d71dfa86fad1d48d52b64
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Mar 3 09:47:48 2011 +0100
Remove unused variable
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
commit c208a5380b20f910ab49433abc0d39dce6bb5528
Author: Alan Hourihane <alanh@vmware.com>
Date: Wed Feb 16 18:53:14 2011 +0100
vmwlegacy: Fix mode lookup
In situations where we have trouble finding a specified mode,
use the resolution given by the width and height device registers.
Signed-off-by: Alan Hourihane <alanh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 2e5001b7e93c63c2cd25d7d8ebdee8a420c13b96
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 16 18:47:02 2011 +0100
vmwlegacy: Add a missing include
The test for Xserver >= 1.2 in the affected file was always failing.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <daenzer@vmware.com>
commit b3c244ebd7899a66aa401d2d7b0ddc66ee56e6d7
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Feb 16 17:29:47 2011 +0100
vmwlegacy: Don't attempt to call RRSendConfigNotify on Xservers < 1.2
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alan Hourihane <alanh@vmware.com>
Reviewed-by: Michel Dänzer <daenzer@vmware.com>
commit eacfa46ada8562bfb15d3fc6a8af272d88036d2f
Author: Michel Dänzer <daenzer@vmware.com>
Date: Thu Jan 27 11:09:39 2011 +0100
vmwlegacy: Send ConfigureNotify events on Xinerama state changes with no mode change
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit cc66e4a49a4a9ac90940d7866db5bc7621cb7e16
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 27 11:02:44 2011 +0100
Fix crosscompile build for older Xservers v2
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit d1ac343b8894a9b8a34c1dcf4b6aeb57239034c0
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jan 21 23:07:10 2011 +0100
Revert "Fix crosscompile build for older Xservers"
This reverts commit 16e16390385d890b3666485a40369f4c690d5033.
The fix was bogus as pointed out by Cyril Bruleboid <kibi@debian.org>, and
Gaetan Nadon <memsize@videotron.ca>
commit 16e16390385d890b3666485a40369f4c690d5033
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 13 13:17:17 2011 +0100
Fix crosscompile build for older Xservers
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 5b30df47117bc65fd5f14667671041428e1d00b5
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Jan 13 12:52:14 2011 +0100
vmwlegacy: Remove Write-Combining setups
The virtual CPUs doesn't support it anyway.
Once suggested by Michel Daenzer.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 8f8f71f0075d9d5cbbfca93425462ba03c5b8046
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Nov 9 14:31:30 2010 +0100
Bump package version to 11.0.3 for release
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 30ac6eaf64aa4831025555b72b65843686a35094
Author: Jesse Adkins <jesserayadkins@gmail.com>
Date: Tue Sep 28 13:29:52 2010 -0700
Purge cvs tags.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
commit 083a663bbb186bfb854eda3b9f33d7fc24252ec5
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Sep 16 10:08:12 2010 +0200
Make the modinfo string contain an optional subpatch number
The idea is that the build system assigns this number if needed.
As an example it might be the commit number since the last version tag.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 5a2206c328caaed95daf91aff9220d3a51b492bd
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Sep 16 09:58:07 2010 +0200
Make sure we build on 1.4.99.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit da0f931b90833c7f706ace24b0c9dff2672f1e97
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Sep 8 09:57:35 2010 +0200
vmwlegacy: Fix a segfault in vmwareCursorCloseScreen.
The segfault occured because the named function was using resources that
were already taken down, because VMWARECloseScreen was called very late
in the CloseScreen callchain.
Make sure we wrap the CloseScreen pointers late in ScreenInit to avoid this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 03dca39afa06da04472d56ec4888f010186c6a13
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Sep 7 21:55:28 2010 +0200
vmwlegacy: A number of Xv fixes
Properly init and uninit the port private clipboxes on setup and end.
Clear the port private clipboxes on video stop, to force re-painting
of the colorkey when the stream is resumed.
Make sure the colorkey is painted *before* the overlay is flushed. Some
host implementations seem picky about this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit dfb062e024dfd20789ee8d43c7f94640faa5ea9f
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Sep 7 12:17:46 2010 +0200
vmware/vmwlegacy: Silence compilation errors and -warnings.
Silence warnings and errors on various server versions due to incorrect
usage of libc functions.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 12e4577c020c6905d09459d833fd1c5313f1647b
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Sep 3 11:19:01 2010 +0200
vmwlegacy: Always scale screen dimensions to the initial DPI on modeswitch.
When we switch mode we usually alter the size in a constant DPI environment
rather than keeping the size constant and alter the DPI.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 81a0a1a37e703296d109022bb76a1291e84064fd
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Sep 1 07:58:18 2010 +0200
vmware: Handle chain-loader failures gracefully.
If the vmwlegacy driver wasn't present when expected, that would
leave the X server in a confused state. Thus report loading errors properly
back to the X server.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 2a72ea7a1b1519451350e0741d145f513124a208
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Aug 18 10:57:02 2010 -0400
vmwarectrl: rework standalone package as a subdir of driver
vmwarectrl is a unit test client tool for developers.
By default, it is not built unless --enable-vmwarectrl-client is used.
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit f51ca2cb756dcd541a27f0326496f0aadab3f214
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed Aug 18 11:34:49 2010 +0200
Make the driver build and run without libdrm.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 2e6eca3e7bb19ea69db2cc367c9704c7d657db79
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Aug 12 17:43:59 2010 +0200
Only set the first xinerama output as primary.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
commit 456b74e8778ab0c44e8a70aa45f447ff5c562be3
Author: Adam Jackson <ajax@redhat.com>
Date: Tue Aug 10 11:02:05 2010 -0400
xf86-video-vmware 11.0.2
Signed-off-by: Adam Jackson <ajax@redhat.com>
commit c29d24b2ca598011b84387006f03a9360910707f
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Fri Jul 23 21:02:33 2010 -0400
config: add AM_PROG_CC_C_O for per-target compilation flags
The use of per-target compilation flags with C sources requires
that the macro AM_PROG_CC_C_O be called from configure.ac
If the C compiler does not accept the -c and -o options simultaneously,
define NO_MINUS_C_MINUS_O. This macro actually tests both the compiler
found by AC_PROG_CC, and, if different, the first cc in the path.
The test fails if one fails. This macro was created for GNU Make
to choose the default C compilation rule.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit dfbef04f1ff9430a01ca0ca682be32a8606e9e13
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Jul 21 16:49:04 2010 -0400
config: add comments for main statements
commit 0dbd97fe7d411549aa343c25dab9c70087532727
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Jul 21 16:07:00 2010 -0400
config: replace deprecated use of AC_OUTPUT with AC_CONFIG_FILES
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit dfaa0b6391ebc32f4e81d8add053eabea44d0881
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Jul 21 14:37:42 2010 -0400
config: replace deprecated AC_HELP_STRING with AS_HELP_STRING
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit dd0bb4ac5730331070eac2c39880718eeff3760b
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Jul 21 14:05:23 2010 -0400
config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit f07d572611ba072c5952fea526e7178202d36685
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Jul 21 09:27:42 2010 -0400
config: complete AC_INIT m4 quoting
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit 79956ca804b4ca6227f878cf794edafefa00d25a
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Jul 20 21:44:58 2010 -0400
config: remove unrequired AC_SUBST([XORG_CFLAGS])
This macro is called by PKG_CHECK_MODULES
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit cee7a37a38f83cd5300a19f17493e43eb532e619
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Jul 20 20:24:42 2010 -0400
config: remove unrequired AC_HEADER_STDC
Autoconf says:
"This macro is obsolescent, as current systems have conforming
header files. New programs need not use this macro".
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit 8adb672ac3f754d02e377745c16f64151b50522a
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Jul 20 19:41:31 2010 -0400
config: remove AC_PROG_CC as it overrides AC_PROG_C_C99
XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls
AC_PROG_C_C99. This sets gcc with -std=gnu99.
If AC_PROG_CC macro is called afterwards, it resets CC to gcc.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit d867b84e425cdf66542eebaabd8adb95b8121960
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Jul 20 18:45:19 2010 -0400
config: update AC_PREREQ statement to 2.60
Unrelated to the previous patches, the new value simply reflects
the reality that the minimum level for autoconf to configure
all x.org modules is 2.60 dated June 2006.
ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit 190a6b7e032e37e33dda42482038b8fd1fd9d8af
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Jul 20 16:15:30 2010 -0400
config: upgrade to util-macros 1.8 for additional man page support
Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS
The value of MAN_SUBST is the same for all X.Org packages.
commit e647511e4b9b924b0617171c56b3bb485674b3ff
Author: Julien Cristau <jcristau@debian.org>
Date: Tue Jul 13 11:57:15 2010 +0100
Don't crash the server on Xorg -configure
commit 0bd99bb142093c0072147ec3bb665864b4cadef5
Author: Fernando Carrijo <fcarrijo@yahoo.com.br>
Date: Thu Jul 1 07:18:11 2010 -0300
Purge macros NEED_EVENTS and NEED_REPLIES
Signed-off-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
commit f307f77a34f3a6777f74458819f6a3519c2c3f2b
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Sun Jun 13 13:10:55 2010 -0400
COPYING: replace stub file with actual Copyright notices.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit 423d8a069a2d86068a8f22926a73bc965670315d
Author: Michel Dänzer <daenzer@vmware.com>
Date: Mon Mar 29 10:19:04 2010 +0200
Fix some issues pointed out by compiler warnings.
* vmware_chain_module() doesn't return any values.
* Remove an unused local variable.
commit cc77a36048863640fb1fa9f82b5b0dbf41326872
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Mar 18 15:30:36 2010 +0100
Bump for 11.0.1 release.
commit a5fb3698a033bfe7789641fd6719d8d4fb054201
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Tue Mar 9 08:37:11 2010 +0000
Rework chainloader code to check for vmwgfx userspace driver as well
commit bf18be6f458a4612b2ebdd8d2b5894f8884891e4
Author: Roland Scheidegger <sroland@vmware.com>
Date: Tue Mar 9 16:10:25 2010 +0100
fix a cursor refcounting bug, leading to segfaults
this is similar to what xf86_use_hw_cursor() does, which is replaced by
vmwareUseHWCursor (otherwise, the refcount could reach zero and hence the
cursor deallocated while xf86CursorEnableDisableFBAccess() could still bring
it back to life from the saved cursor).
It is probably insane to do refcounting here, but this needs a xserver fix,
and even if that's fixed this fix here shouldn't hurt (though would be
unnecessary).
commit 257614ae9bea54d6a46e4477496500a84853ee37
Author: Roland Scheidegger <sroland@vmware.com>
Date: Tue Mar 9 16:03:59 2010 +0100
make DEBUG_LOGGING compile
commit 29f6a2dca3e680908e938767256c9b995653ca7f
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Sun Mar 7 15:02:39 2010 +0000
Print text about none fatal error message with Fatal in it
commit 204504861a2847734a04bd976accb0c730733523
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Fri Feb 26 16:27:17 2010 +0100
Don't hardcode the module version in the source
As pointed out by Julien Cristau XORG_RELEASE_VERSION
gives us that info from configure.ac.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
commit 667263d9410bd0d5832cf08a2a28841fe6326b84
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Feb 18 14:11:32 2010 +0100
Bump major for new chainloading driver
commit 048fe839f0d761aeba95c324f14bdc5488e9e634
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Mon Feb 22 13:20:06 2010 +0100
Link to drm but on for the vmware chainloader driver
commit 30964ffa31f4fdbffe563b7d7d20bfbf1ed22969
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Feb 18 15:20:31 2010 +0100
Make sure that modinfo strings are unique
commit 0f2b02d72e36dc6390c09d6adba13e4101bf3df8
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Feb 11 23:18:37 2010 +0100
Add modinfo for vmware_drv.so
commit c4f5bf8ea45b80c2ac4a5eec65ff58f148fb2807
Author: Jakob Bornecrantz <jakob@vmware.com>
Date: Thu Feb 11 22:04:53 2010 +0100
Add a chain loading module to load new vmwgfx driver if kernel module is loaded
commit 0d9d1724dbe113dcc02736a8ca80ab540057cb5e
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date: Fri Jan 15 14:13:42 2010 -0800
Update Sun license notices to current X.Org standard form
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
commit e0d370ae5f307d96e9dd9384cc0ea66a0f6c06c1
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Tue Dec 15 22:01:02 2009 -0500
configure.ac: remove unused sdkdir=$(pkg-config...) statement
The sdkdir variable isn't use, so remove the statement.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
commit 991830e39c34d0a4530a5c5023ec92cf0d7395b0
Author: Michel Dänzer <daenzer@vmware.com>
Date: Tue Dec 29 17:53:35 2009 +0100
Bump for 10.16.9 release.
commit 5a36fcb6a5899e5cfdf6d65e05e3f999d5d25b2a
Author: Michel Dänzer <daenzer@vmware.com>
Date: Tue Dec 29 17:00:45 2009 +0100
VMWAREComposite: Only hide cursor if source picture is backed by drawable.
Should fix https://bugs.freedesktop.org/show_bug.cgi?id=14208 .
commit 4bec18ab8dffd90ab84b986de2136a9d848d3a4a
Author: Michel Dänzer <daenzer@vmware.com>
Date: Tue Dec 29 16:41:16 2009 +0100
vmware: Fix crash with xserver >= 1.7.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=24541 .
commit 74c830e61bdf700c7e422aaa5b1a0136561295dd
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Mon Nov 23 09:25:06 2009 -0500
Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
Now that the INSTALL file is generated.
Allows running make maintainer-clean.
commit e8f5a924226aacc280923aed661b5a821fdaffe8
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Oct 28 14:41:41 2009 -0400
INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
Automake 'foreign' option is specified in configure.ac.
Remove from Makefile.am
commit edb6fcb49bae735c45d9565f7aa8313396cf3b15
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Wed Oct 28 14:09:10 2009 -0400
INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
Add missing INSTALL file. Use standard GNU file on building tarball
README may have been updated
Remove AUTHORS file as it is empty and no content available yet.
Remove NEWS file as it is empty and no content available yet.
commit dcb3d3ed2ba2129b433eee0d18ec86e1e0a6f21f
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Mon Oct 26 12:54:23 2009 -0400
Several driver modules do not have a ChangeLog target in Makefile.am #23814
The git generated ChangeLog replaces the hand written one.
Update configure.ac to xorg-macros level 1.3.
Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros
Update Makefile.am to add ChangeLog target if missing
Remove ChangeLog from EXTRA_DIST or *CLEAN variables
This is a pre-req for the INSTALL_CMD
commit a9dc11de80966fe00efb6c061a6df00678f80b1f
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Thu Oct 22 13:06:19 2009 -0400
.gitignore: use common defaults with custom section # 24239
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
commit 082d1689a8e017d29b108ed3a251141ddf32a35d
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Thu Oct 22 12:34:18 2009 -0400
.gitignore: use common defaults with custom section # 24239
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
commit 6c8fc7b280295b823675285ed78b0fb2365bcf07
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Tue Sep 8 22:21:33 2009 -0700
Bump fo 10.16.8 Release
commit e3e3d8d2488bd289660943e9038bdbe29e11cf77
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Mon Sep 7 11:12:13 2009 -0400
xf86-video-vmware: Remove unused .cvsignore file #23776
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit cce33db3f95c6f3c8537c782063b6ca9ad68f332
Author: Dave Airlie <airlied@redhat.com>
Date: Tue Jul 28 15:22:42 2009 +1000
vmware: change to using ABI version check
commit 0fddce5511b761206bb5f59dcd17652f15bda5ef
Author: Dave Airlie <airlied@redhat.com>
Date: Tue Jul 28 14:11:59 2009 +1000
vmware: fix resource removal properly
commit 4605e8d3a99ddcd75314051bd00b51d8ecee06a1
Author: Dave Airlie <airlied@redhat.com>
Date: Tue Jul 28 13:32:41 2009 +1000
vmware: update for resources/RAC API removal
commit 382c25f53870da0db0ee74f343c20c312e6b03af
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Jul 20 18:03:47 2009 -0700
Bump for 10.16.7 Release.
commit c2d9678431a40f6a15dc7f50690507cdda8d11e2
Author: Micah Dowty <micah@vmware.com>
Date: Mon Jun 1 10:47:51 2009 -0700
An imperfect fix for Xinerama state changes without a mode change
This patch improves behaviour for Xinerama state changes (via the
VMWARE_CTRL) extension that don't have an accompanying mode change.
This will be the case if a new Xinerama monitor layout has a bounding
box with an identical size to that of the previous layout.
Prior to this patch, the behaviour was pretty bad. If you sent two
Xinerama states with the same bounding box, the second state would
be set as pending but no actual mode change would occur, because
the X server would already be in the right video mode. This means
that the pending mode stays pending.
If another Xinerama state comes in after this, we would hit our
"Aborting due to existing pending state" error, and the new state
would be discarded. This means we'd drop the mode switch on the
floor, plus we'd lie to the client and say it worked.
One example of the user-visible symptoms from this: The user has
four monitors of the same size. We'll call them A through D.
The VM goes into full-screen mode, and they set it to use screens
ABC. Now they switch to BCD. These have the same bounding box size,
so no mode change occurs and a topology is still pending. Now they
switch to monitors BC. This mode switch is dropped, so the guest
is still in the ABC topology and the mode is too wide for BC.
This patch is an incomplete fix. If we're setting a new topology
with the same bounding box, we'll flush the Xinerama state
immediately since we know the mode switch will never occur. This
means we don't get stuck with xineramaNextState set when it
shouldn't be, and we don't have the problem with dropping
subsequent mode changes. We also do set the new Xinerama state,
so apps that query it will see the updated state immediately.
But the fix isn't perfect- as far as I can tell, there's no way
to notify applications that the monitor layout changed without
a mode switch. So even though we've set the new topology, most
apps won't notice. There are ways we could hack around this,
but none of them are pretty.
commit d10841493c4707f23f928d7580bc5bddb51d22a6
Author: Bob Long <blong@vmware.com>
Date: Fri May 22 15:48:55 2009 -0700
Fix black screen after resume from hibernate.
The root cause for the black screen and system lock up is
caused by not recovering the SVGA ID register after hibernation.
Incorrect ID register value will invalidate the FIFO memory start
register, and driver will not retrieve correct FIFO memory start
address and the busy read of svga FIFO sync register will lock up
the whole system.
Currently SVGA Xorg driver does not have a kernel module to handle
the power management event, but Xorg will call driver provided
LeaveVT before shutting down system and call EnterVT after resuming
system from hibernation, so these two callback functions are good
entry points to save and restore the ID register value. This patch
saves the ID register value in LeaveVT and restores the value to
SVGA ID register in EnterVT.
commit b4ea3052f843c2d1c285252cbf1bed2f4857f96c
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Tue May 12 16:48:43 2009 -0700
Bump for 10.16.6 release
commit 8e15f6669ff2cb5bf4260ac87a481a4e38044b26
Author: Micah Dowty <micah@vmware.com>
Date: Tue May 12 16:46:39 2009 -0700
Better cursor size limit and explanation
Increase the cursor size limit to 64x64, and give a
better explanation of the host's cursor size limits.
commit bfa3dfc27b05d4a2deff230f8241bd44f72fb7a0
Author: Micah Dowty <micah@vmware.com>
Date: Tue May 12 16:46:00 2009 -0700
Allow cursor updates while unhidden
This change just adds a flag to our hardware cursor,
telling Xorg that it doesn't need to hide the cursor
when updating its shape. This fixes the cursor flicker
in X11.
commit dccc9376a4fb1cba9c35b7617989608497fca7be
Author: Micah Dowty <micah@vmware.com>
Date: Tue May 12 16:45:29 2009 -0700
Unbreak vmwarectrl setres
The vmwarectrl tool's "setres" command was unusable,
because it looks like someone added the settopology
test without updating the argument indices for setres.
This patch makes setres usable again.
commit b7dbdd28764a8f3883833ab818a7b7314632b0b2
Author: Micah Dowty <micah@vmware.com>
Date: Tue May 12 16:44:42 2009 -0700
Fix dynamic mode edge cases
The VMware Xorg driver supports dynamic modelines that can be set from
userspace via an X extension. These are used to implement VM features
which need to automatically change the resolution of the guest OS.
This driver implements the feature using two modelines. The driver
would alternately update one mode then the other, so that in typical
usage one mode is current and the other is available for the next mode
switch.
This usually worked, but there were many edge cases that could cause
this alternating pattern to get 'out of sync', so we'd end up changing
the resolution of the current video mode. This could end up putting
the X server in a state where the screen resolution has been changed,
but the hardware was never reprogrammed for the new resolution.
This patch fixes the problem by explicitly searching for a dynamic
mode that isn't currently in use. We no longer rely on the alternating
pattern.
commit cfe8793180ec633dd7a17d059ad882ef461ed1d9
Author: Micah Dowty <micah@vmware.com>
Date: Tue May 12 16:43:13 2009 -0700
Update README
Updates the copyright date, and replaces the rather out-of-date
2D documentation with a link to the updated 2D and 3D docs on
Source Forge.
commit e3769142d80953d6da484eb979f5274c8a3abeb3
Author: Shelley Gong <shelleygong@vmware.com>
Date: Thu Apr 16 13:28:47 2009 -0700
Automatically add modelines for the driver's built-in set of modes.
The driver has had a built-in set of modes for a while, but there
was nothing adding modelines to back them up, causing initial modes
to be rejected at startup with certain Xorg versions.
This change adds the actual modelines for sufficiently new versions
of the server (>= 1.2), as the necessary calls were only introduced
at that time.
commit 3c223e8f7b03e2d7f8c31faeeeeb37030c461176
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date: Fri Jan 9 16:39:07 2009 -0800
Remove xorgconfig & xorgcfg from See Also list in man page
commit 1bbef3aa7ab15ee93cd4cd47c3d484ac91f0440d
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Tue Aug 19 11:23:44 2008 -0700
Bump version for 10.16.5 release.
commit 6ea8e5000519865dd936cfe82d67efc7d107a28c
Author: Bankim Bhavsar <bbhavsar@vmware.com>
Date: Tue Aug 19 11:23:02 2008 -0700
Add RegionEqual function for older XFree86 versions.
Fixes bug : http://bugzilla.eng.vmware.com/show_bug.cgi?id=312853
When we added AUTOPAINT_COLORKEY capability to our VMware video driver,
region functions were used to keep track of colorkey painting.
REGION_EQUAL was one of them.
Unfortunately REGION_EQUAL was not present in regionstr.h shipped with XFree86 version
4.3.0.
This version is used by TurboLinux 10; causing X server to crash while playing videos.
REGION_EQUAL was added in revision 1.8 of regionstr.h and available for xfree86 version
4.3.99
onwards.
Reference:
http://cvsweb.xfree86.org/cvsweb/xc/programs/Xserver/include/regionstr.h.diff?r1=1.7&r2=1.8
When I compiled the existing code(without my change), I see a warning was generated
indicating REGION_EQUAL is not present.
Too bad we missed it.
This patch includes
1) Slightly modified version of miRegionEqual from miRegion.c
2) Some formating cleanup.
commit 0576b87c27d3d885cc698a3cc013bcfa4021942c
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Jul 21 15:26:01 2008 -0700
Prepare for 10.16.4 release.
commit ad8f17dec71632d0e606af1bea9432ece0bc97db
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Jul 21 15:23:50 2008 -0700
Video Overlay: Handle clipping correctly with AutoPaint colorkey.
We recently added XV_AUTOPAINT_COLORKEY attribute to the X video driver
to enable applications like Real player that rely on this attribute to
display video frames in Linux guest.
When this attribute is SET, we paint the colorkey on 1st frame and from
there on only when the video is moved.
This introduced a bug 305202 with clipping.
Consider a case when the video is playing, obscure the player window
with another window, without moving the player window, move the other
window away. The part of the window that was obscured didn't display
the video.
With this patch instead of relying on the target rectangle, we use
the clipBoxes supplied in every frame.
commit 71f1ca515cd1b3d92397682f4fcea120c392b26e
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Fri Jul 18 14:03:09 2008 -0700
Prepare for 10.16.3
Bump up version numbers.
commit e7f404938b7ccd4c7e61c71c6c182ca8ee8d875f
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Fri Jul 18 13:59:34 2008 -0700
Video Overlay: Add XV_AUTOPAINT_COLORKEY capability to the Xv extension of Linux guest driver.
Applications use XV_AUTOPAINT_COLORKEY capability to let the driver handle the painting
of colorkey.
Real Player assumes this capability as ON by default and hence prior to this patch videos
didn't play with Real player.
With this patch:
a) If AUTOPAINT_COLORKEY is SET then the driver handles the painting of the colorkey.
Painting is done on the 1st frame and from there on only if the video frame moves.
b) Adds UYVY fourcc format to keep it consistent with Windows SVGA driver and the host backends.
c) Changes the default colorkey from a pungent GREEN to a darker shade.
Real Player sets this colorkey and it looks better when the video is moved around.
commit 0705e7093e42f7a5ae909477150fd5bb416f8da0
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Wed Jul 2 21:32:44 2008 -0400
Trivial fix: Delete ASSERT() statement
Delete the ASSERT() statement that got introduced in the previous check-in.
commit f4b5158960c3402e18a0fcf0e0211b68b0f0f127
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Wed Jul 2 18:17:58 2008 -0400
Fix video overlay offscreen allocation bug
When Kaffeine player stops a video, it sets the cleanup flag to FALSE and may
start playing the next video. In its present state the driver does not check or
clean up the offscreen area. This is a bug as the newer video might need more
offscreen space for its frame. The fix is to check for the offscreen frame size
in videoPlay and restart the stream if necessary.
commit b53bb2ad4c6f6e378cbf82a98cac917736d62740
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Thu Jun 12 17:34:30 2008 -0400
Prepare for 10.16.2
Bump up version numbers.
commit 1f7a8390a32852d2ff0039a7d8138a292d17b50a
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Tue Apr 29 18:29:11 2008 -0400
Fix VMWARE_CTRL and Xinerama Initialization
Move initialization code for the vmware control and xinerama extensions to
VMWAREScreenInit(), so that auto-resize and multi-mon work fine after a user
logs out and logs in again in a graphical display manager.
commit db027200474684c0aa4b9387f3ed53b2e5f24478
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Tue Apr 22 14:18:45 2008 -0400
More xorg and xfree86 backwards compatibility
Push most of the xorg-server version checking into the configure script. With
this change, unmodified driver source compiles in the XFree86 4.3 tree.
commit 6849c0a5fbf10722ca475d2ffcce7d0d95d2377a
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Fri Apr 18 18:00:38 2008 -0400
Change // comments to /*
This will make it easier to compile the driver against ancient versions of X.
commit b6c59761e2b984be32493f35224db523dd62bcd8
Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
Date: Thu Apr 17 23:04:45 2008 -0400
Compile warning fixes
Major problem was prototype vmwareInitVideo not matching implementation
vmwareVideoInit. Remaining are adding an "ansification" of a function without
arguments, and removing/disabling unused variables/functions.
commit 7870dc715b1efe173af1e2664778e2066508e066
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Thu Apr 17 20:54:23 2008 -0400
Bump version to 10.16.1 in configure.ac
The previous change didn't bump up the version in configure.ac.
commit be75c66fa7933c7dfa86e5514c744f47734c5fc8
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Thu Apr 17 20:39:02 2008 -0400
Prepare for 10.16.1
Update the modinfo section and make a configure.ac fix.
commit 87e9b32618f037d78d7853b48e40a71533b764d2
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Thu Apr 17 19:16:48 2008 -0400
Fix build for all modular versions of Xorg
This change makes the video driver compile with Xorg 7.0. There are a couple of
trivial changes that bring down the maximum Xserver version down to 2.0. Hacky,
but good enough for now.
commit e4fa13951a7c5dd53005a63392a439e2329fab9c
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Wed Mar 26 21:32:47 2008 -0400
Send down guest display topology
Send down the Xinerama topology from the guest down to the host, by setting
display topology registers in the SVGA device.
commit 5aced9e39a0bf7590c841824c0b66060eb7d5e03
Author: Adam Jackson <ajax@redhat.com>
Date: Wed Mar 19 17:03:18 2008 -0400
vmware 10.16.0
commit cd8bb3018946e82b98207984efc26b13ac260e5e
Author: Adam Jackson <ajax@redhat.com>
Date: Wed Mar 19 17:00:41 2008 -0400
Fix distcheck.
commit 1314a1cd22823a5a7202dac4ac04da3801f1ec94
Author: Bankim Bhavsar <bbhavsar@vmware.com>
Date: Fri Mar 14 12:42:40 2008 -0400
Video Overlay: Source video parameters
This patch adds parameters to the source video frame. Applications can request
only a subset of the source video frame to be displayed. These parameters are
srcX, srcY, srcWidth and srcHeight. width and height represent the entire
source video frame.
commit fdef3fd5ea62a2df6283d48ba18d5c60300534ef
Author: Matthieu Herrb <matthieu.herrb@laas.fr>
Date: Sun Mar 9 00:08:32 2008 +0100
Makefile.am: nuke RCS Id
commit bfd8398dde2d2de238c600eece9374d24d7d8549
Author: Bankim Bhavsar <bbhavsar@vmware.com>
Date: Wed Jan 23 22:13:07 2008 -0800
Xv extension for VMware's video driver
This patch implements the Xv extension for VMware's X video driver.
The Xv specification can be found here
http://www.xfree86.org/current/DESIGN16.html
I've written a trivial offscreen memory manager that allocates memory from the
bottom part of the Video RAM and it can handle only 1 video-stream. Eventually
we intend to support upto 32 video-streams (there is already support for
multiple video streams in respective backends).
commit a33ab73ffa5d3797d16c3a265ddefc56a5a93b6b
Author: Vinay <vinay@vinayb-dev4.(none)>
Date: Sat Jan 19 08:39:24 2008 -0800
Trivial libpciaccess related fix
Fix VMWAREUnmapMem to correctly unmap memory for the libpciaccess case.
commit 62d898669baccfd4c312f3ed8f228d0c3217d3c3
Author: Vinay Bondhugula <vinayb@vmware.com>
Date: Mon Oct 8 10:54:04 2007 -0700
Port to libpciaccess.
commit 73db59fd82ced7a88f6da35d5088608e163f3d86
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Tue Sep 25 16:06:38 2007 -0700
Update for 10.15.2 release
commit ee2fe14d37c9f3c8a170f8e3fcbc62403687ab8f
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Sep 24 11:48:12 2007 -0700
There are problems when running with old X releases with a
global symbol collision with the mouse driver.
commit cfdb0140fa53155ae134ba961ec7d593d5d94713
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Sep 10 21:19:38 2007 -0700
Guard modinfo section against gcc.
commit e41aef1fb187c1b450fbea0163eb16e0c40f0435
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Sep 10 21:16:04 2007 -0700
Ready 10.15.1 release.
To allow for easier detection of driver version by other VMware tools,
we are embedding the version in a .modinfo section so that the Linux
kernel 'modinfo' tool can be (ab)used to check it.
commit 2331c7d1629f9841c02cf907ef4fa8b679cc5141
Author: James Cloos <cloos@jhcloos.com>
Date: Mon Sep 3 05:52:51 2007 -0400
Add *~ to .gitignore to skip patch/emacs droppings
commit ec4dc29434bbbcf382de51fe3355679654489ad7
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Jul 9 13:45:22 2007 -0700
Update copyright date.
commit 0c76b95e7aeac034cc598ea6a407187f76466411
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Fri Feb 9 15:06:17 2007 -0800
Add svga_modes.h to Makefile.am
commit a283c62c1db9e25ba11c6d72e4d00e0d911d64a2
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Fri Feb 9 11:09:17 2007 -0800
Filter out default modes that are larger than the hardware
maxmimum size and add an explicit mode for the hardware
maximum.
commit f4540555dc8c823dfec53dddeb82e2b7b0dbfe3d
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Fri Feb 9 10:00:32 2007 -0800
Correct the incorrect 1080p resolution.
Should be 1920x1080 and not 1900x1080. Whoops.
commit eca6e9f9458440feebd6598aee24f02a3fd7a75f
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Thu Feb 8 18:22:16 2007 -0800
Bump version to 10.15.0
This release adds truely usable resizing support by
removing the restriction that the you cannot resize
larger than the initial mode.
commit 2ec8c25cc935a318bd07c0d1fba9960dfe8f38d4
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Thu Feb 8 18:07:19 2007 -0800
Fix a race condition when switching to a multihead fullscreen mode.
Due to implemtation details on the host side, switching to a multihead
fullscreen mode means multiple mode changes along the way. However,
because rrSetScreenConfig returns before the mode change completes,
we can enter a race, where a subsequent SetDisplayTopology overrides
the current pending one, leading to a mode switch where the resolution
and topology are no longer consistent.
So, we fix this by ignoring any attempts to set the pending topology if
one is already pending.
commit a8afe781e108773e4a575ecc3330a5aa83c1cbb9
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Thu Feb 8 17:08:08 2007 -0800
Add a bunch of useful modes to the mode list.
The X server prunes modes above the initial mode and
the number of default modes varies with distro and
server version. As it's easy to do, let's add a bunch
of useful versions in the driver so that users don't
have to mess with their config files as often.
commit 520f570aa3869090eac3accf6a2b3886ab188590
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Thu Feb 8 13:44:57 2007 -0800
Update man page to remove mention of the NoAccel option which
no longer exists as we don't do any 'acceleration'.
commit af8c0596a224ba8436d55c5dd6063fff688c7ad1
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Thu Feb 8 13:42:31 2007 -0800
Remove XAA 'acceleration'.
We have a lot of stale code to 'accelerate' certain operations
through XAA. However, in practice, this acceleration is
completely unhelpful because whenever we encounter an
unaccelerated action, we have to sync and flush the fifo
which kills any performance gain.
As such, the virtual hardware doesn't even advertise these
acceleration capabilities anymore, so the code is completely
unusued.
In addition, XAA is on the way out, so there's no point
leaving in dead code which will have to go in the fairly
near future.
The one operation we can meaningfully accelerate is a
front-only fill and when we get around to implementing
that, we'll use EXA instead.
commit 3dc1ebc7c2c76f575b5150f1890ec13f8bd3e8a1
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Thu Feb 8 10:33:14 2007 -0800
Make resizing work once and for all.
This change removes the limitation on resizing larger than the
initial size and removes the need for pitch-locking bu resizing
the screen pixmap. Now the only limit on the screen size is
the maximum width/height reported by the virtual hardware which
is configured on the host side.
commit 188c2b44f0f47093092414f9364a52cc2d5016ad
Author: Eamon Walsh <ewalsh@tycho.nsa.gov>
Date: Mon Dec 18 14:05:19 2006 -0500
Revert "Convert callers of LookupWindow() to dixLookupWindow()."
This reverts commit 1f298c24fe1dde35f0d77cc34518eb9c2b873fc5.
commit 1f298c24fe1dde35f0d77cc34518eb9c2b873fc5
Author: Eamon Walsh <ewalsh@tycho.nsa.gov>
Date: Fri Dec 15 17:41:52 2006 -0500
Convert callers of LookupWindow() to dixLookupWindow().
commit 9d41384616c8f6d00b53a61634f73e728d86d615
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Dec 6 16:48:12 2006 -0800
Explicitly initialise buffer to NULL for parsing xinerama topologies.
commit ac2a57ea7aea00c695495aa01c27402569a9514a
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Tue Oct 31 19:17:39 2006 -0800
Update man page to document "StaticXinerama"
commit 4dd038bd73208184344cae4f363c492c7e61524b
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Tue Oct 31 19:12:29 2006 -0800
Bump version to 10.14.0
commit 73945118a6b3cad60f4a1927b9394206d36e8281
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Oct 30 11:52:57 2006 -0800
Fix more warnings.
commit e0dca2ff0b695b60830cf8f10a2c0585602a4d40
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Mon Oct 30 10:53:18 2006 -0800
Fix some warnings noted when compiling the code against
older Xorg versions.
commit f96d12047725becf0515cc4df8572ca4a3956309
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 25 18:06:13 2006 -0700
Refactor static Xinerama parsing.
commit 57b32570f84d06180be2c9d249174b04f02d9fca
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 25 10:49:27 2006 -0700
Add support for a static Xinerama configuration to be specified
in xorg.conf. This static configuration will always be used and
any attempts to update it will be ignored.
Note that all xinerama aware apps that I have seen will not
sanity check the xinerama extents against the screen size, so
if the screen doesn't properly enclose the xinerama extents,
expect your apps to punish you accordingly.
commit c62a63b00f7c43e265079d31f1bf7ff447423056
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 11 11:47:39 2006 -0700
Update .gitignore
commit 9345f8146ae41f7d2269e6fea5e3cba385139960
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 11 11:47:25 2006 -0700
Add vmwarectrl sample client.
commit b35666fdd567d4cd92574aeecadb8e0d41b32d77
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 11 11:36:22 2006 -0700
Add .gitignore files.
commit 7631f4d8db2b83878bd886204aaa978dac9c47b5
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 11 11:32:18 2006 -0700
Document the 'Xinerama' option and tweak the default to reflect
the capabilites of the underlying hardware.
commit 79de175986817cac2fedb267cc9a04438b3694d4
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 11 11:26:04 2006 -0700
Check for xinerama in configure.ac
commit 34e7264e99ceab5e9e2e022ed9a56531845b0b17
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Oct 11 10:57:57 2006 -0700
Add xinerama support to the vmware video driver. (Better late than never).
With this change, the VMWARE_CTRL extension is updated so that it can
receive topology updates at runtime. I will add some sample client code
separately.
I also intend to add support for a static initial topology defined in
xorg.conf but I haven't got around to it yet due to hating to write
string parsing code.
commit dd201e23cc50ded2f316dbfa5d265608b80d994d
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Wed Sep 20 11:40:54 2006 -0700
Add support for the upcoming PITCHLOCK register. The FIFO register
is deprecated but support is retained so the driver works with
Workstation 5.5 and friends.
commit 0850feff708ded63c27dc938ca4b9b8fcbed122b
Author: Philip Langdale <philipl@fido2.homeip.net>
Date: Sun Sep 3 10:45:22 2006 -0700
Fix https://bugs.freedesktop.org/show_bug.cgi?id=8094
Lazily allocate the dynamic modes used for pixel precise guest
resizing. They will not appear until they are neeed.
commit 86aeab28b806642946e59a98573c5b25840c35ed
Author: Adam Jackson <ajax@nwnk.net>
Date: Fri Apr 7 21:57:24 2006 +0000
Unlibcwrap. Bump server version requirement. Bump to 1.1.0.
commit fe6963e09a8197f5c11e8a828c8da4024601a466
Author: Adam Jackson <ajax@nwnk.net>
Date: Fri Apr 7 21:55:49 2006 +0000
Unlibcwrap. Bump server version requirement. Bump to 10.13.0.
commit ac83dff5d6a54b05e0377ceac2b133238293fa0e
Author: philipl <philipl>
Date: Tue Feb 7 18:51:35 2006 +0000
Add VMWARE_CTRL extension.
commit a49f1e65147dc1ab805c74951cb0915b1352e8a9
Author: philipl <philipl>
Date: Tue Jan 17 00:40:43 2006 +0000
Use DriverFunc to adjust physical size to keep DPI constant.
commit ff3f9dc930ff6bd2d6a73d56c70b0284a597cd62
Author: Kevin E Martin <kem@kem.org>
Date: Wed Dec 21 02:30:04 2005 +0000
Update package version for X11R7 release.
commit aa1da8e57939081f15db04fa8c654f363f4e4cb7
Author: Adam Jackson <ajax@nwnk.net>
Date: Mon Dec 19 16:25:56 2005 +0000
Stub COPYING files
commit 835f8000fdbdd35a6bbc5eabf1252d4040a798da
Author: Kevin E Martin <kem@kem.org>
Date: Thu Dec 15 00:24:21 2005 +0000
Update package version number for final X11R7 release candidate.
commit 32a969be355c0c948739b4f18e0caa83c78960cc
Author: Kevin E Martin <kem@kem.org>
Date: Tue Dec 6 22:48:41 2005 +0000
Change *man_SOURCES ==> *man_PRE to fix autotools warnings.
commit 643a290d01553c9fefe9b4e268ae515d49cd1af9
Author: Kevin E Martin <kem@kem.org>
Date: Sat Dec 3 05:49:37 2005 +0000
Update package version number for X11R7 RC3 release.
commit 9d0f12ee6bf340765317214ffef2f70883025e9e
Author: Kevin E Martin <kem@kem.org>
Date: Fri Dec 2 02:16:12 2005 +0000
Remove extraneous AC_MSG_RESULT.
commit e0a08567f46f73005589876d38e3f5ff7543557b
Author: Adam Jackson <ajax@nwnk.net>
Date: Tue Nov 29 23:30:06 2005 +0000
Only build dlloader modules by default.
commit c80ca69d0160b78e8d2bbeae01de52978f8e581f
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date: Mon Nov 28 22:04:15 2005 +0000
Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4
update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir)
commit 417099c602463ff364f70a938c4a2d2275d8a5b7
Author: Eric Anholt <anholt@freebsd.org>
Date: Mon Nov 21 10:49:23 2005 +0000
Add .cvsignores for drivers.
commit 26a28492f738defa0445059c2dd6bb9cad89d0aa
Author: Kevin E Martin <kem@kem.org>
Date: Wed Nov 9 21:31:21 2005 +0000
Bump version numbers for X11R6.9/X11R7 RC2.
commit 9ba2f5c58f6ffc9533f5d1852b6d7ba25fa4785a
Author: Kevin E Martin <kem@kem.org>
Date: Wed Nov 9 21:15:23 2005 +0000
Update package version number for X11R7 RC2 release.
commit 731860b1fea54f2ce54fbf02ab77d7c01f381f80
Author: nolan <nolan>
Date: Thu Nov 3 04:26:00 2005 +0000
Fix a bug where the cursor disappears. Committed on behalf of Shelley Gong
(shelleygong@vmware.com).
commit 623b3c8297fc0b0d05ce0d6684ef3ab57054b0eb
Author: Kevin E Martin <kem@kem.org>
Date: Tue Nov 1 15:08:57 2005 +0000
Update pkgcheck depedencies to work with separate build roots.
commit 4f1ef5a0bf2172b9d38c6b1b5dd92ae8efe01f42
Author: Kevin E Martin <kem@kem.org>
Date: Wed Oct 19 02:48:06 2005 +0000
Update package version number for RC1 release.
commit 3abe1c93562dbc4bbebfd293f7e90972e90c9dcc
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date: Tue Oct 18 00:01:55 2005 +0000
Use @DRIVER_MAN_SUFFIX@ instead of $(DRIVER_MAN_SUFFIX) in macro
substitutions to work better with BSD make
commit ba3716950db330db08960248827bbf9321d42d71
Author: Adam Jackson <ajax@nwnk.net>
Date: Mon Oct 17 22:57:38 2005 +0000
More 1.7 braindamage: define EXTRA_DIST in terms of @DRIVER_NAME@ instead
of indirectly
commit 18207a8cc41044538520dd9f0036e44d3fe26f94
Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
Date: Mon Oct 17 00:09:09 2005 +0000
Use sed & cpp to substitute variables in driver man pages
commit bce0feda4d05bd8fd4db20476e117026a21f3906
Author: nolan <nolan>
Date: Fri Sep 23 02:55:25 2005 +0000
Support for XRandR in the VMware driver. Committed on behalf of Phil
Langdale (plangdale@vmware.com)
commit f06924363cd77770257db5aac6d4d3c6add89dfa
Author: Daniel Stone <daniel@fooishbar.org>
Date: Thu Aug 18 09:03:55 2005 +0000
Update autogen.sh to one that does objdir != srcdir.
commit 120d7d1c616d1e2e3c7ca0d1d119d1b0731491c6
Author: Kevin E Martin <kem@kem.org>
Date: Fri Jul 29 21:22:46 2005 +0000
Various changes preparing packages for RC0:
- Verify and update package version numbers as needed
- Implement versioning scheme
- Change bug address to point to bugzilla bug entry form
- Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
reenable it)
- Fix makedepend to use pkgconfig and pass distcheck
- Update build script to build macros first
- Update modular Xorg version
commit cd14003e4bf878e464437143cf18d30803ace999
Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
Date: Tue Jul 26 23:57:30 2005 +0000
Build system for vmware
commit e5ab935718e3f6aea8edc5edef5c0bd78af0ba14
Author: Adam Jackson <ajax@nwnk.net>
Date: Mon Jul 11 02:30:07 2005 +0000
Prep for modular builds by adding guarded #include "config.h" everywhere.
commit daa2be7a9adf977eb4b63bb601d4b8b0b2881903
Author: Daniel Stone <daniel@fooishbar.org>
Date: Fri Jul 1 22:43:21 2005 +0000
Change all misc.h and os.h references to <X11/foo.h>.
commit ae1ba62c3937e6d1067f850d3aeb0b11d316fb86
Author: Adam Jackson <ajax@nwnk.net>
Date: Sat Jun 25 21:17:00 2005 +0000
Bug #3626: _X_EXPORT tags for video and input drivers.
commit 57d09f92c656203958bbc2040f255040f7d051ca
Author: nolan <nolan>
Date: Fri Feb 18 23:15:59 2005 +0000
updated copyright string in man page of VMware SVGA driver.
commit b4379cd6f99c14a2feaabce4560f6dfd62543c62
Author: nolan <nolan>
Date: Thu Sep 30 21:44:35 2004 +0000
Bugfix for Alpha Texture acceleration from Constantine Sapuntzakis.
commit 325df911a83e336d3463ea2220151af4e9f0ccfa
Author: nolan <nolan>
Date: Sat Aug 14 01:03:55 2004 +0000
Save the register state before we write to any of them. This makes the
VMware driver coexist with VESA fbcon.
commit fed82eea7b64b645926c5102563887bc424245b7
Author: nolan <nolan>
Date: Tue Jun 29 02:20:25 2004 +0000
Send cursor hotspot through the FIFO. This fixes host cursor. Allow any bpp
when 8BIT_EMULATION is set. Save/restore the ID register.
commit a3bdeecbb99c721987a22d52c8adf4b1a96e8eec
Author: Eric Anholt <anholt@freebsd.org>
Date: Wed Jun 16 09:22:38 2004 +0000
DRI XFree86-4_3_99_12-merge import
commit 2e4ba05c72961b611c9c4b93038ce54ab54ab9c3
Author: Egbert Eich <eich@suse.de>
Date: Fri Apr 23 19:53:57 2004 +0000
Merging XORG-CURRENT into trunk
commit b01798791090f20fbf4907902d0d35853c05e3a2
Author: Egbert Eich <eich@suse.de>
Date: Sun Mar 14 08:33:42 2004 +0000
Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004
commit 2ef56b50d6b4fc44359b2bf181ece342fb569153
Author: Egbert Eich <eich@suse.de>
Date: Wed Mar 3 12:12:28 2004 +0000
Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004
commit 7218efdc0d95a5d50b3ddfc6a76921e285cf61b6
Author: Egbert Eich <eich@suse.de>
Date: Thu Feb 26 13:35:56 2004 +0000
readding XFree86's cvs IDs
commit 205e213f8b296c47a80e7c8cfb835449b064fd84
Author: Egbert Eich <eich@suse.de>
Date: Thu Feb 26 09:23:29 2004 +0000
Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004
commit 2f79bc6606f337d0d892e6c73cdf11fe211ead13
Author: Kaleb Keithley <kaleb@freedesktop.org>
Date: Tue Nov 25 19:28:43 2003 +0000
XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks
commit 118eb1bdba4191972b1ca182e34f3d3ca456daea
Author: Kaleb Keithley <kaleb@freedesktop.org>
Date: Fri Nov 14 16:48:55 2003 +0000
XFree86 4.3.0.1
commit 0b01e22c9cd727cce23c4a9670806f7a839e1937
Author: Kaleb Keithley <kaleb@freedesktop.org>
Date: Fri Nov 14 16:48:55 2003 +0000
Initial revision
Generated by dwww version 1.15 on Thu Jun 27 23:33:38 CEST 2024.