README for USB_ModeSwitch
For up-to-date and more detailed information (plus a friendly forum) visit
http://www.draisberghof.de/usb_modeswitch
What it is
==========
USB_ModeSwitch is - hardly surprising - a mode switching tool for controlling
USB devices with multiple "modes". Now, what does THAT mean?
More and more USB devices have their MS Windows drivers onboard; when plugged
in for the first time they act like a flash storage and offer their driver
installation from there.
After installation (and on every consecutive plugging) the driver switches the
mode internally by sending a certain command sequence; the storage device
vanishes (in most cases) and a different device - like a USB modem - shows up.
To the host, this is like unplugging one device and then plugging annother.
At first this feature appeared on devices with cell phone chipsets, presumably
because some of them were already able to change the mode of their USB port
from storage to communication - so why not make use of this in a modem stick?
Modem maker "Option" calls that feature "ZeroCD (TM)" since it eliminates the
need for shipping a separate driver carrier.
In the beginning, nothing of this was documented in any form and there was
hardly any Linux/Unix support available.
On the good side, most of the known devices are working out of the box in all
modes with available Linux modules like "usb-storage" or serial USB drivers.
That leaves only the problem of the mode-switching from storage to whatever
the thing is supposed to do.
Fortunately there are things like human smartness, USB sniffing programs and
LibUSB. The obvious way is to eavesdrop on the communication of the MS Windows
driver, to isolate the command or action that does the switching, and then re-
play the same sequence in a non-Windows system.
In theory, this task could also be handled on the kernel driver level, but a
userspace program is much more flexible and can easily be disabled if access
to the initial mode of those devices should be desired. There has been a
principle decision by kernel developers to keep mode-switching outside of the
kernel.
So USB_ModeSwitch has evolved to make this process easy to handle by taking the
relevant parameters from configuration files and handling all initialization
and communication business, with essential help from "libusb".
In Linux and friends it is intended to work automatically - via udev events
and rules - and doing the mode switch without any user interaction.
However, the core C program should be as portable als libusb itself; it does not
rely on specific Linux features.
It can also be run as an interactive command line tool, which can be useful
when trying to tinker with hitherto unknown devices.
We have already collected a wide range of information on how to mode-switch all
sorts of devices. If you run into a new one that is unknown yet, don't despair:
we can find out what you need to do!
How to install
==============
If you only need the core C program, run "make usb_modeswitch". All further steps
described below are referring to a common, fairly current Linux system where
USB_ModeSwitch is expected to do its work automatically.
!! You need the usb-modeswitch-data package from the same source as this !!
If you have an earlier version installed, de-installation is recommended ("make
uninstall") but not mandatory. The dispatcher's location changed in 1.1.0;
old files might be orphaned but will not do any harm.
The main prerequisite for installing from source is the development package for
"libusb". It may be called "libusb-dev" or similar in your distribution. From
usb_modeswitch 2.0.0 on, it should have an "1.x" in the name to reflect the change
to libusb-1. There are also variants around called "libusbx" if libusb-1 is not
available on your distribution.
To install the tool set, unpack and run the install command (see below) in the
newly created directory.
From version 1.2.0, there are three flavours of installing. The only difference
between those is the way the dispatcher is installed, but this affects the
dependencies as well:
1. If you have the "Tcl" scripting language available on your system (packages
"tcl" or "jimsh"), use the light-weight installation:
# make install
2. If you are size-constrained and have the Jimsh library on your system
(package "libjim-dev"), you can have the Tcl interpreter embedded with the
dispatcher, using its shared lib:
# make install-dynlink
3. If you are size-constrained and definitely don't need a Tcl interpreter
for anything else, choose the statically embedded flavour. You will need
to have "libjim.a" on your system, but afterwards the dispatcher has no more
special dependencies:
# make install-statlink
Note that the "dynlink" and "statlink" targets are NOT referring to the
usb_modeswitch program, only to the dispatcher!
Any one of these commands will install a small posix shell script for udev,
the dispatcher (basically a wrapper) as script or as binary, a global config
file, the core program and a man page.
Install the data package as well and you are set.
NOTE: installing over (possibly outdated) distribution packages of this program
and the data collection should generally not be a problem.
How to use
==========
If your device is known, you should be able to just plug it and use it. If
it doesn't work - we will find out why.
For manual use just run "usb_modeswitch" (as root). Work with the command
line interface or with a setup file. You can use any file and give its path
with the "-c" parameter.
The file named "device_reference.txt" that you can find on the home site of
this package is a device and configuration reference containing most known
devices; you can use it as a "database" to create your own configuration file.
It's heavily commented and should tell you what to do. It also contains a
thorough explanation of all the parameters.
However, the device list in that reference file is no longer maintained.
See the data package for the USB IDs of devices known to usb_modeswitch.
Run "usb_modeswitch -h" to list the command line parameters.
See also the provided man page.
Important note: Manual use is intended for testing and analyzing. The
program puts no limits on what you can send to your USB device, so I
assume it's possible to screw it up profoundly. You have been warned.
Once your new device is switching fine you can add it to the data files to
make the process automatic.
For this to work, add a rule entry to the rules file to let udev run
usb_modeswitch as soon as the default IDs are found (when the device is
plugged). If you look into the rules file you will see immediately how
your new entry should look like.
The location is:
/lib/udev/rules.d/40-usb_modeswitch.rules
Then add your new config file to the folder
"/etc/usb_modeswitch.d" (only for custom config files!).
And don't forget to report your success !!
Again, remember that the rules file and the default device config folder
(/usr/share/usb_modeswitch) are installed by the usb_modeswitch data package.
##########
Important: libusb programs - like this tool - want to be run with administrative
privileges (as root or with sudo)!
##########
Known working hardware, Troubleshooting
=======================================
Please go to the homepage (see link at the top). Read carefully.
For support questions use ONLY public posts in the forum.
ONCE AGAIN: The USB IDs of devices are the only halfway reliable indicator to
determine if they are known/supported. Brand and model names are often not
helpful, due to rebranding and fimrware variations.
See the data package, folder "usb_modeswitch.d" for known IDs.
Contribute
==========
USB_ModeSwitch comes quite handy for experimenting with your own hardware if
not supported yet. You could try this approach:
Note the device's vendor and product ID from /proc/bus/usb/devices (or from the
output of lsusb); the assigned driver is usually "usb-storage". Then try spying
on the USB communication to the device with the same ID inside MS Windoze.
Nowadays the standard tool for this is Wireshark/USBPcap.
PLEASE post any improvements, new device information and/or bug reports to the
forum (see above) or send it to the author (see below)!
Whodunit
========
Copyright 2007 - 2019 Josua Dietze (for non-support notifications write a personal
message through the forum to "Josh"; everything else only in a forum thread)
!!! NO SUPPORT QUESTIONS VIA E-MAIL, use the forum !!!
Major contributions:
Command line parsing and other essential contributions:
Joakim Wennergren
TargetClass parameter implementation to support new Option devices/firmware:
Paul Hardwick (http://www.pharscape.org)
Created with initial help from:
"usbsnoop2libusb.pl" by Timo Lindfors
(http://iki.fi/lindi/usb/usbsnoop2libusb.pl)
Config file parsing code borrowed from:
Guillaume Dargaud (http://www.gdargaud.net/Hack/SourceCode.html)
Hexstr2bin function borrowed from:
Jouni Malinen (http://hostap.epitest.fi/wpa_supplicant, from "common.c")
Indispensable help with device research and compilation:
Lars Melin
Code, fixes and ideas contributed by:
Aki Makkonen
Denis Sutter
Lucas Benedicic
Roman Laube
Luigi Iotti
Vincent Teoh
Tommy Cheng
Daniel Cooper
Andrew Bird
Yaroslav Levandovskiy
Sakis Dimopoulos
Steven Fernandez
Christophe Fergeau
Nils Radtke
Filip Aben
Amit Mendapara
Roman S. Samarev
Chi-Hang Long
Andrey Tikhomirov
Daniel Mende
Nicholas Carrier
Adam Goode
Leonid Lisovskiy
Vladislav Grishenko
Lubomir Rintel
Frank Schmirler
Device information contributors are named in the "device_reference.txt" file.
Legal
=====
The files usb_modeswitch.c, usb_modeswitch.h, usb_modeswitch.sh and
usb_modeswitch_dispatcher.tcl are released under the conditions of
the GPL 2 (or any later GPL version of your choice). It says:
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details:
http://www.gnu.org/licenses/gpl.txt
You can also find it in the file COPYING in this folder.
The file dispatcher.c is released under the BSD-2-Clause, as available here:
https://opensource.org/licenses/BSD-2-Clause
You can also find it in the file COPYING in this folder.
Last revised: 2019-11-27, Josua Dietze
Generated by dwww version 1.15 on Thu Jun 27 23:16:18 CEST 2024.