# Changelog All notable changes to charset-normalizer will be documented in this file. This project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/). ## [3.0.1](https://github.com/Ousret/charset_normalizer/compare/3.0.0...3.0.1) (2022-11-18) ### Fixed - Multi-bytes cutter/chunk generator did not always cut correctly (PR #233) ### Changed - Speedup provided by mypy/c 0.990 on Python >= 3.7 ## [3.0.0](https://github.com/Ousret/charset_normalizer/compare/2.1.1...3.0.0) (2022-10-20) ### Added - Extend the capability of explain=True when cp_isolation contains at most two entries (min one), will log in details of the Mess-detector results - Support for alternative language frequency set in charset_normalizer.assets.FREQUENCIES - Add parameter `language_threshold` in `from_bytes`, `from_path` and `from_fp` to adjust the minimum expected coherence ratio - `normalizer --version` now specify if current version provide extra speedup (meaning mypyc compilation whl) ### Changed - Build with static metadata using 'build' frontend - Make the language detection stricter - Optional: Module `md.py` can be compiled using Mypyc to provide an extra speedup up to 4x faster than v2.1 ### Fixed - CLI with opt --normalize fail when using full path for files - TooManyAccentuatedPlugin induce false positive on the mess detection when too few alpha character have been fed to it - Sphinx warnings when generating the documentation ### Removed - Coherence detector no longer return 'Simple English' instead return 'English' - Coherence detector no longer return 'Classical Chinese' instead return 'Chinese' - Breaking: Method `first()` and `best()` from CharsetMatch - UTF-7 will no longer appear as "detected" without a recognized SIG/mark (is unreliable/conflict with ASCII) - Breaking: Class aliases CharsetDetector, CharsetDoctor, CharsetNormalizerMatch and CharsetNormalizerMatches - Breaking: Top-level function `normalize` - Breaking: Properties `chaos_secondary_pass`, `coherence_non_latin` and `w_counter` from CharsetMatch - Support for the backport `unicodedata2` ## [3.0.0rc1](https://github.com/Ousret/charset_normalizer/compare/3.0.0b2...3.0.0rc1) (2022-10-18) ### Added - Extend the capability of explain=True when cp_isolation contains at most two entries (min one), will log in details of the Mess-detector results - Support for alternative language frequency set in charset_normalizer.assets.FREQUENCIES - Add parameter `language_threshold` in `from_bytes`, `from_path` and `from_fp` to adjust the minimum expected coherence ratio ### Changed - Build with static metadata using 'build' frontend - Make the language detection stricter ### Fixed - CLI with opt --normalize fail when using full path for files - TooManyAccentuatedPlugin induce false positive on the mess detection when too few alpha character have been fed to it ### Removed - Coherence detector no longer return 'Simple English' instead return 'English' - Coherence detector no longer return 'Classical Chinese' instead return 'Chinese' ## [3.0.0b2](https://github.com/Ousret/charset_normalizer/compare/3.0.0b1...3.0.0b2) (2022-08-21) ### Added - `normalizer --version` now specify if current version provide extra speedup (meaning mypyc compilation whl) ### Removed - Breaking: Method `first()` and `best()` from CharsetMatch - UTF-7 will no longer appear as "detected" without a recognized SIG/mark (is unreliable/conflict with ASCII) ### Fixed - Sphinx warnings when generating the documentation ## [3.0.0b1](https://github.com/Ousret/charset_normalizer/compare/2.1.0...3.0.0b1) (2022-08-15) ### Changed - Optional: Module `md.py` can be compiled using Mypyc to provide an extra speedup up to 4x faster than v2.1 ### Removed - Breaking: Class aliases CharsetDetector, CharsetDoctor, CharsetNormalizerMatch and CharsetNormalizerMatches - Breaking: Top-level function `normalize` - Breaking: Properties `chaos_secondary_pass`, `coherence_non_latin` and `w_counter` from CharsetMatch - Support for the backport `unicodedata2` ## [2.1.1](https://github.com/Ousret/charset_normalizer/compare/2.1.0...2.1.1) (2022-08-19) ### Deprecated - Function `normalize` scheduled for removal in 3.0 ### Changed - Removed useless call to decode in fn is_unprintable (#206) ### Fixed - Third-party library (i18n xgettext) crashing not recognizing utf_8 (PEP 263) with underscore from [@aleksandernovikov](https://github.com/aleksandernovikov) (#204) ## [2.1.0](https://github.com/Ousret/charset_normalizer/compare/2.0.12...2.1.0) (2022-06-19) ### Added - Output the Unicode table version when running the CLI with `--version` (PR #194) ### Changed - Re-use decoded buffer for single byte character sets from [@nijel](https://github.com/nijel) (PR #175) - Fixing some performance bottlenecks from [@deedy5](https://github.com/deedy5) (PR #183) ### Fixed - Workaround potential bug in cpython with Zero Width No-Break Space located in Arabic Presentation Forms-B, Unicode 1.1 not acknowledged as space (PR #175) - CLI default threshold aligned with the API threshold from [@oleksandr-kuzmenko](https://github.com/oleksandr-kuzmenko) (PR #181) ### Removed - Support for Python 3.5 (PR #192) ### Deprecated - Use of backport unicodedata from `unicodedata2` as Python is quickly catching up, scheduled for removal in 3.0 (PR #194) ## [2.0.12](https://github.com/Ousret/charset_normalizer/compare/2.0.11...2.0.12) (2022-02-12) ### Fixed - ASCII miss-detection on rare cases (PR #170) ## [2.0.11](https://github.com/Ousret/charset_normalizer/compare/2.0.10...2.0.11) (2022-01-30) ### Added - Explicit support for Python 3.11 (PR #164) ### Changed - The logging behavior have been completely reviewed, now using only TRACE and DEBUG levels (PR #163 #165) ## [2.0.10](https://github.com/Ousret/charset_normalizer/compare/2.0.9...2.0.10) (2022-01-04) ### Fixed - Fallback match entries might lead to UnicodeDecodeError for large bytes sequence (PR #154) ### Changed - Skipping the language-detection (CD) on ASCII (PR #155) ## [2.0.9](https://github.com/Ousret/charset_normalizer/compare/2.0.8...2.0.9) (2021-12-03) ### Changed - Moderating the logging impact (since 2.0.8) for specific environments (PR #147) ### Fixed - Wrong logging level applied when setting kwarg `explain` to True (PR #146) ## [2.0.8](https://github.com/Ousret/charset_normalizer/compare/2.0.7...2.0.8) (2021-11-24) ### Changed - Improvement over Vietnamese detection (PR #126) - MD improvement on trailing data and long foreign (non-pure latin) data (PR #124) - Efficiency improvements in cd/alphabet_languages from [@adbar](https://github.com/adbar) (PR #122) - call sum() without an intermediary list following PEP 289 recommendations from [@adbar](https://github.com/adbar) (PR #129) - Code style as refactored by Sourcery-AI (PR #131) - Minor adjustment on the MD around european words (PR #133) - Remove and replace SRTs from assets / tests (PR #139) - Initialize the library logger with a `NullHandler` by default from [@nmaynes](https://github.com/nmaynes) (PR #135) - Setting kwarg `explain` to True will add provisionally (bounded to function lifespan) a specific stream handler (PR #135) ### Fixed - Fix large (misleading) sequence giving UnicodeDecodeError (PR #137) - Avoid using too insignificant chunk (PR #137) ### Added - Add and expose function `set_logging_handler` to configure a specific StreamHandler from [@nmaynes](https://github.com/nmaynes) (PR #135) - Add `CHANGELOG.md` entries, format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) (PR #141) ## [2.0.7](https://github.com/Ousret/charset_normalizer/compare/2.0.6...2.0.7) (2021-10-11) ### Added - Add support for Kazakh (Cyrillic) language detection (PR #109) ### Changed - Further, improve inferring the language from a given single-byte code page (PR #112) - Vainly trying to leverage PEP263 when PEP3120 is not supported (PR #116) - Refactoring for potential performance improvements in loops from [@adbar](https://github.com/adbar) (PR #113) - Various detection improvement (MD+CD) (PR #117) ### Removed - Remove redundant logging entry about detected language(s) (PR #115) ### Fixed - Fix a minor inconsistency between Python 3.5 and other versions regarding language detection (PR #117 #102) ## [2.0.6](https://github.com/Ousret/charset_normalizer/compare/2.0.5...2.0.6) (2021-09-18) ### Fixed - Unforeseen regression with the loss of the backward-compatibility with some older minor of Python 3.5.x (PR #100) - Fix CLI crash when using --minimal output in certain cases (PR #103) ### Changed - Minor improvement to the detection efficiency (less than 1%) (PR #106 #101) ## [2.0.5](https://github.com/Ousret/charset_normalizer/compare/2.0.4...2.0.5) (2021-09-14) ### Changed - The project now comply with: flake8, mypy, isort and black to ensure a better overall quality (PR #81) - The BC-support with v1.x was improved, the old staticmethods are restored (PR #82) - The Unicode detection is slightly improved (PR #93) - Add syntax sugar \_\_bool\_\_ for results CharsetMatches list-container (PR #91) ### Removed - The project no longer raise warning on tiny content given for detection, will be simply logged as warning instead (PR #92) ### Fixed - In some rare case, the chunks extractor could cut in the middle of a multi-byte character and could mislead the mess detection (PR #95) - Some rare 'space' characters could trip up the UnprintablePlugin/Mess detection (PR #96) - The MANIFEST.in was not exhaustive (PR #78) ## [2.0.4](https://github.com/Ousret/charset_normalizer/compare/2.0.3...2.0.4) (2021-07-30) ### Fixed - The CLI no longer raise an unexpected exception when no encoding has been found (PR #70) - Fix accessing the 'alphabets' property when the payload contains surrogate characters (PR #68) - The logger could mislead (explain=True) on detected languages and the impact of one MBCS match (PR #72) - Submatch factoring could be wrong in rare edge cases (PR #72) - Multiple files given to the CLI were ignored when publishing results to STDOUT. (After the first path) (PR #72) - Fix line endings from CRLF to LF for certain project files (PR #67) ### Changed - Adjust the MD to lower the sensitivity, thus improving the global detection reliability (PR #69 #76) - Allow fallback on specified encoding if any (PR #71) ## [2.0.3](https://github.com/Ousret/charset_normalizer/compare/2.0.2...2.0.3) (2021-07-16) ### Changed - Part of the detection mechanism has been improved to be less sensitive, resulting in more accurate detection results. Especially ASCII. (PR #63) - According to the community wishes, the detection will fall back on ASCII or UTF-8 in a last-resort case. (PR #64) ## [2.0.2](https://github.com/Ousret/charset_normalizer/compare/2.0.1...2.0.2) (2021-07-15) ### Fixed - Empty/Too small JSON payload miss-detection fixed. Report from [@tseaver](https://github.com/tseaver) (PR #59) ### Changed - Don't inject unicodedata2 into sys.modules from [@akx](https://github.com/akx) (PR #57) ## [2.0.1](https://github.com/Ousret/charset_normalizer/compare/2.0.0...2.0.1) (2021-07-13) ### Fixed - Make it work where there isn't a filesystem available, dropping assets frequencies.json. Report from [@sethmlarson](https://github.com/sethmlarson). (PR #55) - Using explain=False permanently disable the verbose output in the current runtime (PR #47) - One log entry (language target preemptive) was not show in logs when using explain=True (PR #47) - Fix undesired exception (ValueError) on getitem of instance CharsetMatches (PR #52) ### Changed - Public function normalize default args values were not aligned with from_bytes (PR #53) ### Added - You may now use charset aliases in cp_isolation and cp_exclusion arguments (PR #47) ## [2.0.0](https://github.com/Ousret/charset_normalizer/compare/1.4.1...2.0.0) (2021-07-02) ### Changed - 4x to 5 times faster than the previous 1.4.0 release. At least 2x faster than Chardet. - Accent has been made on UTF-8 detection, should perform rather instantaneous. - The backward compatibility with Chardet has been greatly improved. The legacy detect function returns an identical charset name whenever possible. - The detection mechanism has been slightly improved, now Turkish content is detected correctly (most of the time) - The program has been rewritten to ease the readability and maintainability. (+Using static typing)+ - utf_7 detection has been reinstated. ### Removed - This package no longer require anything when used with Python 3.5 (Dropped cached_property) - Removed support for these languages: Catalan, Esperanto, Kazakh, Baque, Volapük, Azeri, Galician, Nynorsk, Macedonian, and Serbocroatian. - The exception hook on UnicodeDecodeError has been removed. ### Deprecated - Methods coherence_non_latin, w_counter, chaos_secondary_pass of the class CharsetMatch are now deprecated and scheduled for removal in v3.0 ### Fixed - The CLI output used the relative path of the file(s). Should be absolute. ## [1.4.1](https://github.com/Ousret/charset_normalizer/compare/1.4.0...1.4.1) (2021-05-28) ### Fixed - Logger configuration/usage no longer conflict with others (PR #44) ## [1.4.0](https://github.com/Ousret/charset_normalizer/compare/1.3.9...1.4.0) (2021-05-21) ### Removed - Using standard logging instead of using the package loguru. - Dropping nose test framework in favor of the maintained pytest. - Choose to not use dragonmapper package to help with gibberish Chinese/CJK text. - Require cached_property only for Python 3.5 due to constraint. Dropping for every other interpreter version. - Stop support for UTF-7 that does not contain a SIG. - Dropping PrettyTable, replaced with pure JSON output in CLI. ### Fixed - BOM marker in a CharsetNormalizerMatch instance could be False in rare cases even if obviously present. Due to the sub-match factoring process. - Not searching properly for the BOM when trying utf32/16 parent codec. ### Changed - Improving the package final size by compressing frequencies.json. - Huge improvement over the larges payload. ### Added - CLI now produces JSON consumable output. - Return ASCII if given sequences fit. Given reasonable confidence. ## [1.3.9](https://github.com/Ousret/charset_normalizer/compare/1.3.8...1.3.9) (2021-05-13) ### Fixed - In some very rare cases, you may end up getting encode/decode errors due to a bad bytes payload (PR #40) ## [1.3.8](https://github.com/Ousret/charset_normalizer/compare/1.3.7...1.3.8) (2021-05-12) ### Fixed - Empty given payload for detection may cause an exception if trying to access the `alphabets` property. (PR #39) ## [1.3.7](https://github.com/Ousret/charset_normalizer/compare/1.3.6...1.3.7) (2021-05-12) ### Fixed - The legacy detect function should return UTF-8-SIG if sig is present in the payload. (PR #38) ## [1.3.6](https://github.com/Ousret/charset_normalizer/compare/1.3.5...1.3.6) (2021-02-09) ### Changed - Amend the previous release to allow prettytable 2.0 (PR #35) ## [1.3.5](https://github.com/Ousret/charset_normalizer/compare/1.3.4...1.3.5) (2021-02-08) ### Fixed - Fix error while using the package with a python pre-release interpreter (PR #33) ### Changed - Dependencies refactoring, constraints revised. ### Added - Add python 3.9 and 3.10 to the supported interpreters
Generated by dwww version 1.15 on Thu Jun 27 23:19:55 CEST 2024.