.. include:: common.txt
:mod:`pygame.Surface`
=====================
.. currentmodule:: pygame
.. class:: Surface
| :sl:`pygame object for representing images`
| :sg:`Surface((width, height), flags=0, depth=0, masks=None) -> Surface`
| :sg:`Surface((width, height), flags=0, Surface) -> Surface`
A pygame Surface is used to represent any image. The Surface has a fixed
resolution and pixel format. Surfaces with 8-bit pixels use a color palette
to map to 24-bit color.
Call :meth:`pygame.Surface()` to create a new image object. The Surface will
be cleared to all black. The only required arguments are the sizes. With no
additional arguments, the Surface will be created in a format that best
matches the display Surface.
The pixel format can be controlled by passing the bit depth or an existing
Surface. The flags argument is a bitmask of additional features for the
surface. You can pass any combination of these flags:
::
HWSURFACE (obsolete in pygame 2) creates the image in video memory
SRCALPHA the pixel format will include a per-pixel alpha
Both flags are only a request, and may not be possible for all displays and
formats.
Advance users can combine a set of bitmasks with a depth value. The masks
are a set of 4 integers representing which bits in a pixel will represent
each color. Normal Surfaces should not require the masks argument.
Surfaces can have many extra attributes like alpha planes, colorkeys, source
rectangle clipping. These functions mainly effect how the Surface is blitted
to other Surfaces. The blit routines will attempt to use hardware
acceleration when possible, otherwise they will use highly optimized
software blitting methods.
There are three types of transparency supported in pygame: colorkeys,
surface alphas, and pixel alphas. Surface alphas can be mixed with
colorkeys, but an image with per pixel alphas cannot use the other modes.
Colorkey transparency makes a single color value transparent. Any pixels
matching the colorkey will not be drawn. The surface alpha value is a single
value that changes the transparency for the entire image. A surface alpha of
255 is opaque, and a value of 0 is completely transparent.
Per pixel alphas are different because they store a transparency value for
every pixel. This allows for the most precise transparency effects, but it
also the slowest. Per pixel alphas cannot be mixed with surface alpha and
colorkeys.
There is support for pixel access for the Surfaces. Pixel access on hardware
surfaces is slow and not recommended. Pixels can be accessed using the
:meth:`get_at()` and :meth:`set_at()` functions. These methods are fine for
simple access, but will be considerably slow when doing of pixel work with
them. If you plan on doing a lot of pixel level work, it is recommended to
use a :class:`pygame.PixelArray`, which gives an array like view of the
surface. For involved mathematical manipulations try the
:mod:`pygame.surfarray` module (It's quite quick, but requires NumPy.)
Any functions that directly access a surface's pixel data will need that
surface to be lock()'ed. These functions can :meth:`lock()` and
:meth:`unlock()` the surfaces themselves without assistance. But, if a
function will be called many times, there will be a lot of overhead for
multiple locking and unlocking of the surface. It is best to lock the
surface manually before making the function call many times, and then
unlocking when you are finished. All functions that need a locked surface
will say so in their docs. Remember to leave the Surface locked only while
necessary.
Surface pixels are stored internally as a single number that has all the
colors encoded into it. Use the :meth:`map_rgb()` and
:meth:`unmap_rgb()` to convert between individual red, green, and blue
values into a packed integer for that Surface.
Surfaces can also reference sections of other Surfaces. These are created
with the :meth:`subsurface()` method. Any change to either Surface will
effect the other.
Each Surface contains a clipping area. By default the clip area covers the
entire Surface. If it is changed, all drawing operations will only effect
the smaller area.
.. method:: blit
| :sl:`draw one image onto another`
| :sg:`blit(source, dest, area=None, special_flags=0) -> Rect`
Draws a source Surface onto this Surface. The draw can be positioned with
the dest argument. The dest argument can either be a pair of coordinates representing the position of
the upper left corner of the blit or a Rect, where the upper left corner of the rectangle will be used as the
position for the blit. The size of the destination rectangle does not
effect the blit.
An optional area rectangle can be passed as well. This represents a
smaller portion of the source Surface to draw.
.. versionadded:: 1.8
Optional ``special_flags``: ``BLEND_ADD``, ``BLEND_SUB``,
``BLEND_MULT``, ``BLEND_MIN``, ``BLEND_MAX``.
.. versionadded:: 1.8.1
Optional ``special_flags``: ``BLEND_RGBA_ADD``, ``BLEND_RGBA_SUB``,
``BLEND_RGBA_MULT``, ``BLEND_RGBA_MIN``, ``BLEND_RGBA_MAX``
``BLEND_RGB_ADD``, ``BLEND_RGB_SUB``, ``BLEND_RGB_MULT``,
``BLEND_RGB_MIN``, ``BLEND_RGB_MAX``.
.. versionadded:: 1.9.2
Optional ``special_flags``: ``BLEND_PREMULTIPLIED``
.. versionadded:: 2.0.0
Optional ``special_flags``: ``BLEND_ALPHA_SDL2`` - Uses the SDL2 blitter for alpha blending,
this gives different results than the default blitter, which is modelled after SDL1, due to
different approximations used for the alpha blending formula. The SDL2 blitter also supports
RLE on alpha blended surfaces which the pygame one does not.
The return rectangle is the area of the affected pixels, excluding any
pixels outside the destination Surface, or outside the clipping area.
Pixel alphas will be ignored when blitting to an 8 bit Surface.
For a surface with colorkey or blanket alpha, a blit to self may give
slightly different colors than a non self-blit.
.. ## Surface.blit ##
.. method:: blits
| :sl:`draw many images onto another`
| :sg:`blits(blit_sequence=((source, dest), ...), doreturn=1) -> [Rect, ...] or None`
| :sg:`blits(((source, dest, area), ...)) -> [Rect, ...]`
| :sg:`blits(((source, dest, area, special_flags), ...)) -> [Rect, ...]`
Draws many surfaces onto this Surface. It takes a sequence as input,
with each of the elements corresponding to the ones of :meth:`blit()`.
It needs at minimum a sequence of (source, dest).
:param blit_sequence: a sequence of surfaces and arguments to blit them,
they correspond to the :meth:`blit()` arguments
:param doreturn: if ``True``, return a list of rects of the areas changed,
otherwise return ``None``
:returns: a list of rects of the areas changed if ``doreturn`` is
``True``, otherwise ``None``
:rtype: list or None
New in pygame 1.9.4.
.. ## Surface.blits ##
.. method:: convert
| :sl:`change the pixel format of an image`
| :sg:`convert(Surface=None) -> Surface`
| :sg:`convert(depth, flags=0) -> Surface`
| :sg:`convert(masks, flags=0) -> Surface`
Creates a new copy of the Surface with the pixel format changed. The new
pixel format can be determined from another existing Surface. Otherwise
depth, flags, and masks arguments can be used, similar to the
:meth:`pygame.Surface()` call.
If no arguments are passed the new Surface will have the same pixel
format as the display Surface. This is always the fastest format for
blitting. It is a good idea to convert all Surfaces before they are
blitted many times.
The converted Surface will have no pixel alphas. They will be stripped if
the original had them. See :meth:`convert_alpha()` for preserving or
creating per-pixel alphas.
The new copy will have the same class as the copied surface. This lets
as Surface subclass inherit this method without the need to override,
unless subclass specific instance attributes also need copying.
.. ## Surface.convert ##
.. method:: convert_alpha
| :sl:`change the pixel format of an image including per pixel alphas`
| :sg:`convert_alpha(Surface) -> Surface`
| :sg:`convert_alpha() -> Surface`
Creates a new copy of the surface with the desired pixel format. The new
surface will be in a format suited for quick blitting to the given format
with per pixel alpha. If no surface is given, the new surface will be
optimized for blitting to the current display.
Unlike the :meth:`convert()` method, the pixel format for the new
image will not be exactly the same as the requested source, but it will
be optimized for fast alpha blitting to the destination.
As with :meth:`convert()` the returned surface has the same class as
the converted surface.
.. ## Surface.convert_alpha ##
.. method:: copy
| :sl:`create a new copy of a Surface`
| :sg:`copy() -> Surface`
Makes a duplicate copy of a Surface. The new surface will have the same
pixel formats, color palettes, transparency settings, and class as the
original. If a Surface subclass also needs to copy any instance specific
attributes then it should override ``copy()``.
.. ## Surface.copy ##
.. method:: fill
| :sl:`fill Surface with a solid color`
| :sg:`fill(color, rect=None, special_flags=0) -> Rect`
Fill the Surface with a solid color. If no rect argument is given the
entire Surface will be filled. The rect argument will limit the fill to a
specific area. The fill will also be contained by the Surface clip area.
The color argument can be either a ``RGB`` sequence, a ``RGBA`` sequence
or a mapped color index. If using ``RGBA``, the Alpha (A part of
``RGBA``) is ignored unless the surface uses per pixel alpha (Surface has
the ``SRCALPHA`` flag).
.. versionadded:: 1.8
Optional ``special_flags``: ``BLEND_ADD``, ``BLEND_SUB``,
``BLEND_MULT``, ``BLEND_MIN``, ``BLEND_MAX``.
.. versionadded:: 1.8.1
Optional ``special_flags``: ``BLEND_RGBA_ADD``, ``BLEND_RGBA_SUB``,
``BLEND_RGBA_MULT``, ``BLEND_RGBA_MIN``, ``BLEND_RGBA_MAX``
``BLEND_RGB_ADD``, ``BLEND_RGB_SUB``, ``BLEND_RGB_MULT``,
``BLEND_RGB_MIN``, ``BLEND_RGB_MAX``.
This will return the affected Surface area.
.. ## Surface.fill ##
.. method:: scroll
| :sl:`Shift the surface image in place`
| :sg:`scroll(dx=0, dy=0) -> None`
Move the image by dx pixels right and dy pixels down. dx and dy may be
negative for left and up scrolls respectively. Areas of the surface that
are not overwritten retain their original pixel values. Scrolling is
contained by the Surface clip area. It is safe to have dx and dy values
that exceed the surface size.
.. versionadded:: 1.9
.. ## Surface.scroll ##
.. method:: set_colorkey
| :sl:`Set the transparent colorkey`
| :sg:`set_colorkey(Color, flags=0) -> None`
| :sg:`set_colorkey(None) -> None`
Set the current color key for the Surface. When blitting this Surface
onto a destination, any pixels that have the same color as the colorkey
will be transparent. The color can be an ``RGB`` color or a mapped color
integer. If ``None`` is passed, the colorkey will be unset.
The colorkey will be ignored if the Surface is formatted to use per pixel
alpha values. The colorkey can be mixed with the full Surface alpha
value.
The optional flags argument can be set to ``pygame.RLEACCEL`` to provide
better performance on non accelerated displays. An ``RLEACCEL`` Surface
will be slower to modify, but quicker to blit as a source.
.. ## Surface.set_colorkey ##
.. method:: get_colorkey
| :sl:`Get the current transparent colorkey`
| :sg:`get_colorkey() -> RGB or None`
Return the current colorkey value for the Surface. If the colorkey is not
set then ``None`` is returned.
.. ## Surface.get_colorkey ##
.. method:: set_alpha
| :sl:`set the alpha value for the full Surface image`
| :sg:`set_alpha(value, flags=0) -> None`
| :sg:`set_alpha(None) -> None`
Set the current alpha value for the Surface. When blitting this Surface
onto a destination, the pixels will be drawn slightly transparent. The
alpha value is an integer from 0 to 255, 0 is fully transparent and 255
is fully opaque. If ``None`` is passed for the alpha value, then alpha
blending will be disabled, including per-pixel alpha.
This value is different than the per pixel Surface alpha. For a surface
with per pixel alpha, blanket alpha is ignored and ``None`` is returned.
.. versionchanged:: 2.0 per-surface alpha can be combined with per-pixel
alpha.
The optional flags argument can be set to ``pygame.RLEACCEL`` to provide
better performance on non accelerated displays. An ``RLEACCEL`` Surface
will be slower to modify, but quicker to blit as a source.
.. ## Surface.set_alpha ##
.. method:: get_alpha
| :sl:`get the current Surface transparency value`
| :sg:`get_alpha() -> int_value`
Return the current alpha value for the Surface.
.. ## Surface.get_alpha ##
.. method:: lock
| :sl:`lock the Surface memory for pixel access`
| :sg:`lock() -> None`
Lock the pixel data of a Surface for access. On accelerated Surfaces, the
pixel data may be stored in volatile video memory or nonlinear compressed
forms. When a Surface is locked the pixel memory becomes available to
access by regular software. Code that reads or writes pixel values will
need the Surface to be locked.
Surfaces should not remain locked for more than necessary. A locked
Surface can often not be displayed or managed by pygame.
Not all Surfaces require locking. The :meth:`mustlock()` method can
determine if it is actually required. There is no performance penalty for
locking and unlocking a Surface that does not need it.
All pygame functions will automatically lock and unlock the Surface data
as needed. If a section of code is going to make calls that will
repeatedly lock and unlock the Surface many times, it can be helpful to
wrap the block inside a lock and unlock pair.
It is safe to nest locking and unlocking calls. The surface will only be
unlocked after the final lock is released.
.. ## Surface.lock ##
.. method:: unlock
| :sl:`unlock the Surface memory from pixel access`
| :sg:`unlock() -> None`
Unlock the Surface pixel data after it has been locked. The unlocked
Surface can once again be drawn and managed by pygame. See the
:meth:`lock()` documentation for more details.
All pygame functions will automatically lock and unlock the Surface data
as needed. If a section of code is going to make calls that will
repeatedly lock and unlock the Surface many times, it can be helpful to
wrap the block inside a lock and unlock pair.
It is safe to nest locking and unlocking calls. The surface will only be
unlocked after the final lock is released.
.. ## Surface.unlock ##
.. method:: mustlock
| :sl:`test if the Surface requires locking`
| :sg:`mustlock() -> bool`
Returns ``True`` if the Surface is required to be locked to access pixel
data. Usually pure software Surfaces do not require locking. This method
is rarely needed, since it is safe and quickest to just lock all Surfaces
as needed.
All pygame functions will automatically lock and unlock the Surface data
as needed. If a section of code is going to make calls that will
repeatedly lock and unlock the Surface many times, it can be helpful to
wrap the block inside a lock and unlock pair.
.. ## Surface.mustlock ##
.. method:: get_locked
| :sl:`test if the Surface is current locked`
| :sg:`get_locked() -> bool`
Returns ``True`` when the Surface is locked. It doesn't matter how many
times the Surface is locked.
.. ## Surface.get_locked ##
.. method:: get_locks
| :sl:`Gets the locks for the Surface`
| :sg:`get_locks() -> tuple`
Returns the currently existing locks for the Surface.
.. ## Surface.get_locks ##
.. method:: get_at
| :sl:`get the color value at a single pixel`
| :sg:`get_at((x, y)) -> Color`
Return a copy of the ``RGBA`` Color value at the given pixel. If the
Surface has no per pixel alpha, then the alpha value will always be 255
(opaque). If the pixel position is outside the area of the Surface an
``IndexError`` exception will be raised.
Getting and setting pixels one at a time is generally too slow to be used
in a game or realtime situation. It is better to use methods which
operate on many pixels at a time like with the blit, fill and draw
methods - or by using :mod:`pygame.surfarray`/:mod:`pygame.PixelArray`.
This function will temporarily lock and unlock the Surface as needed.
.. versionadded:: 1.9
Returning a Color instead of tuple. Use ``tuple(surf.get_at((x,y)))``
if you want a tuple, and not a Color. This should only matter if
you want to use the color as a key in a dict.
.. ## Surface.get_at ##
.. method:: set_at
| :sl:`set the color value for a single pixel`
| :sg:`set_at((x, y), Color) -> None`
Set the ``RGBA`` or mapped integer color value for a single pixel. If the
Surface does not have per pixel alphas, the alpha value is ignored.
Setting pixels outside the Surface area or outside the Surface clipping
will have no effect.
Getting and setting pixels one at a time is generally too slow to be used
in a game or realtime situation.
This function will temporarily lock and unlock the Surface as needed.
.. ## Surface.set_at ##
.. method:: get_at_mapped
| :sl:`get the mapped color value at a single pixel`
| :sg:`get_at_mapped((x, y)) -> Color`
Return the integer value of the given pixel. If the pixel position is
outside the area of the Surface an ``IndexError`` exception will be
raised.
This method is intended for pygame unit testing. It unlikely has any use
in an application.
This function will temporarily lock and unlock the Surface as needed.
.. versionadded:: 1.9.2
.. ## Surface.get_at_mapped ##
.. method:: get_palette
| :sl:`get the color index palette for an 8-bit Surface`
| :sg:`get_palette() -> [RGB, RGB, RGB, ...]`
Return a list of up to 256 color elements that represent the indexed
colors used in an 8-bit Surface. The returned list is a copy of the
palette, and changes will have no effect on the Surface.
Returning a list of ``Color(with length 3)`` instances instead of tuples.
.. versionadded:: 1.9
.. ## Surface.get_palette ##
.. method:: get_palette_at
| :sl:`get the color for a single entry in a palette`
| :sg:`get_palette_at(index) -> RGB`
Returns the red, green, and blue color values for a single index in a
Surface palette. The index should be a value from 0 to 255.
.. versionadded:: 1.9
Returning ``Color(with length 3)`` instance instead of a tuple.
.. ## Surface.get_palette_at ##
.. method:: set_palette
| :sl:`set the color palette for an 8-bit Surface`
| :sg:`set_palette([RGB, RGB, RGB, ...]) -> None`
Set the full palette for an 8-bit Surface. This will replace the colors in
the existing palette. A partial palette can be passed and only the first
colors in the original palette will be changed.
This function has no effect on a Surface with more than 8-bits per pixel.
.. ## Surface.set_palette ##
.. method:: set_palette_at
| :sl:`set the color for a single index in an 8-bit Surface palette`
| :sg:`set_palette_at(index, RGB) -> None`
Set the palette value for a single entry in a Surface palette. The index
should be a value from 0 to 255.
This function has no effect on a Surface with more than 8-bits per pixel.
.. ## Surface.set_palette_at ##
.. method:: map_rgb
| :sl:`convert a color into a mapped color value`
| :sg:`map_rgb(Color) -> mapped_int`
Convert an ``RGBA`` color into the mapped integer value for this Surface.
The returned integer will contain no more bits than the bit depth of the
Surface. Mapped color values are not often used inside pygame, but can be
passed to most functions that require a Surface and a color.
See the Surface object documentation for more information about colors
and pixel formats.
.. ## Surface.map_rgb ##
.. method:: unmap_rgb
| :sl:`convert a mapped integer color value into a Color`
| :sg:`unmap_rgb(mapped_int) -> Color`
Convert an mapped integer color into the ``RGB`` color components for
this Surface. Mapped color values are not often used inside pygame, but
can be passed to most functions that require a Surface and a color.
See the Surface object documentation for more information about colors
and pixel formats.
.. ## Surface.unmap_rgb ##
.. method:: set_clip
| :sl:`set the current clipping area of the Surface`
| :sg:`set_clip(rect) -> None`
| :sg:`set_clip(None) -> None`
Each Surface has an active clipping area. This is a rectangle that
represents the only pixels on the Surface that can be modified. If
``None`` is passed for the rectangle the full Surface will be available
for changes.
The clipping area is always restricted to the area of the Surface itself.
If the clip rectangle is too large it will be shrunk to fit inside the
Surface.
.. ## Surface.set_clip ##
.. method:: get_clip
| :sl:`get the current clipping area of the Surface`
| :sg:`get_clip() -> Rect`
Return a rectangle of the current clipping area. The Surface will always
return a valid rectangle that will never be outside the bounds of the
image. If the Surface has had ``None`` set for the clipping area, the
Surface will return a rectangle with the full area of the Surface.
.. ## Surface.get_clip ##
.. method:: subsurface
| :sl:`create a new surface that references its parent`
| :sg:`subsurface(Rect) -> Surface`
Returns a new Surface that shares its pixels with its new parent. The new
Surface is considered a child of the original. Modifications to either
Surface pixels will effect each other. Surface information like clipping
area and color keys are unique to each Surface.
The new Surface will inherit the palette, color key, and alpha settings
from its parent.
It is possible to have any number of subsurfaces and subsubsurfaces on
the parent. It is also possible to subsurface the display Surface if the
display mode is not hardware accelerated.
See :meth:`get_offset()` and :meth:`get_parent()` to learn more
about the state of a subsurface.
A subsurface will have the same class as the parent surface.
.. ## Surface.subsurface ##
.. method:: get_parent
| :sl:`find the parent of a subsurface`
| :sg:`get_parent() -> Surface`
Returns the parent Surface of a subsurface. If this is not a subsurface
then ``None`` will be returned.
.. ## Surface.get_parent ##
.. method:: get_abs_parent
| :sl:`find the top level parent of a subsurface`
| :sg:`get_abs_parent() -> Surface`
Returns the parent Surface of a subsurface. If this is not a subsurface
then this surface will be returned.
.. ## Surface.get_abs_parent ##
.. method:: get_offset
| :sl:`find the position of a child subsurface inside a parent`
| :sg:`get_offset() -> (x, y)`
Get the offset position of a child subsurface inside of a parent. If the
Surface is not a subsurface this will return (0, 0).
.. ## Surface.get_offset ##
.. method:: get_abs_offset
| :sl:`find the absolute position of a child subsurface inside its top level parent`
| :sg:`get_abs_offset() -> (x, y)`
Get the offset position of a child subsurface inside of its top level
parent Surface. If the Surface is not a subsurface this will return (0,
0).
.. ## Surface.get_abs_offset ##
.. method:: get_size
| :sl:`get the dimensions of the Surface`
| :sg:`get_size() -> (width, height)`
Return the width and height of the Surface in pixels.
.. ## Surface.get_size ##
.. method:: get_width
| :sl:`get the width of the Surface`
| :sg:`get_width() -> width`
Return the width of the Surface in pixels.
.. ## Surface.get_width ##
.. method:: get_height
| :sl:`get the height of the Surface`
| :sg:`get_height() -> height`
Return the height of the Surface in pixels.
.. ## Surface.get_height ##
.. method:: get_rect
| :sl:`get the rectangular area of the Surface`
| :sg:`get_rect(\**kwargs) -> Rect`
Returns a new rectangle covering the entire surface. This rectangle will
always start at (0, 0) with a width and height the same size as the image.
You can pass keyword argument values to this function. These named values
will be applied to the attributes of the Rect before it is returned. An
example would be ``mysurf.get_rect(center=(100, 100))`` to create a
rectangle for the Surface centered at a given position.
.. ## Surface.get_rect ##
.. method:: get_bitsize
| :sl:`get the bit depth of the Surface pixel format`
| :sg:`get_bitsize() -> int`
Returns the number of bits used to represent each pixel. This value may
not exactly fill the number of bytes used per pixel. For example a 15 bit
Surface still requires a full 2 bytes.
.. ## Surface.get_bitsize ##
.. method:: get_bytesize
| :sl:`get the bytes used per Surface pixel`
| :sg:`get_bytesize() -> int`
Return the number of bytes used per pixel.
.. ## Surface.get_bytesize ##
.. method:: get_flags
| :sl:`get the additional flags used for the Surface`
| :sg:`get_flags() -> int`
Returns a set of current Surface features. Each feature is a bit in the
flags bitmask. Typical flags are ``RLEACCEL``, ``SRCALPHA``, and
``SRCCOLORKEY``.
Here is a more complete list of flags. A full list can be found in
``SDL_video.h``
::
SWSURFACE 0x00000000 # Surface is in system memory
HWSURFACE 0x00000001 # (obsolete in pygame 2) Surface is in video memory
ASYNCBLIT 0x00000004 # (obsolete in pygame 2) Use asynchronous blits if possible
See :func:`pygame.display.set_mode()` for flags exclusive to the
display surface.
Used internally (read-only)
::
HWACCEL 0x00000100 # Blit uses hardware acceleration
SRCCOLORKEY 0x00001000 # Blit uses a source color key
RLEACCELOK 0x00002000 # Private flag
RLEACCEL 0x00004000 # Surface is RLE encoded
SRCALPHA 0x00010000 # Blit uses source alpha blending
PREALLOC 0x01000000 # Surface uses preallocated memory
.. ## Surface.get_flags ##
.. method:: get_pitch
| :sl:`get the number of bytes used per Surface row`
| :sg:`get_pitch() -> int`
Return the number of bytes separating each row in the Surface. Surfaces
in video memory are not always linearly packed. Subsurfaces will also
have a larger pitch than their real width.
This value is not needed for normal pygame usage.
.. ## Surface.get_pitch ##
.. method:: get_masks
| :sl:`the bitmasks needed to convert between a color and a mapped integer`
| :sg:`get_masks() -> (R, G, B, A)`
Returns the bitmasks used to isolate each color in a mapped integer.
This value is not needed for normal pygame usage.
.. ## Surface.get_masks ##
.. method:: set_masks
| :sl:`set the bitmasks needed to convert between a color and a mapped integer`
| :sg:`set_masks((r,g,b,a)) -> None`
This is not needed for normal pygame usage.
.. note:: In SDL2, the masks are read-only and accordingly this method will raise
an AttributeError if called.
.. versionadded:: 1.8.1
.. ## Surface.set_masks ##
.. method:: get_shifts
| :sl:`the bit shifts needed to convert between a color and a mapped integer`
| :sg:`get_shifts() -> (R, G, B, A)`
Returns the pixel shifts need to convert between each color and a mapped
integer.
This value is not needed for normal pygame usage.
.. ## Surface.get_shifts ##
.. method:: set_shifts
| :sl:`sets the bit shifts needed to convert between a color and a mapped integer`
| :sg:`set_shifts((r,g,b,a)) -> None`
This is not needed for normal pygame usage.
.. note:: In SDL2, the shifts are read-only and accordingly this method will raise
an AttributeError if called.
.. versionadded:: 1.8.1
.. ## Surface.set_shifts ##
.. method:: get_losses
| :sl:`the significant bits used to convert between a color and a mapped integer`
| :sg:`get_losses() -> (R, G, B, A)`
Return the least significant number of bits stripped from each color in a
mapped integer.
This value is not needed for normal pygame usage.
.. ## Surface.get_losses ##
.. method:: get_bounding_rect
| :sl:`find the smallest rect containing data`
| :sg:`get_bounding_rect(min_alpha = 1) -> Rect`
Returns the smallest rectangular region that contains all the pixels in
the surface that have an alpha value greater than or equal to the minimum
alpha value.
This function will temporarily lock and unlock the Surface as needed.
.. versionadded:: 1.8
.. ## Surface.get_bounding_rect ##
.. method:: get_view
| :sl:`return a buffer view of the Surface's pixels.`
| :sg:`get_view(<kind>='2') -> BufferProxy`
Return an object which exports a surface's internal pixel buffer as
a C level array struct, Python level array interface or a C level
buffer interface. The new buffer protocol is supported.
The kind argument is the length 1 string '0', '1', '2', '3',
'r', 'g', 'b', or 'a'. The letters are case insensitive;
'A' will work as well. The argument can be either a Unicode or byte (char)
string. The default is '2'.
'0' returns a contiguous unstructured bytes view. No surface shape
information is given. A ``ValueError`` is raised if the surface's pixels
are discontinuous.
'1' returns a (surface-width * surface-height) array of continuous
pixels. A ``ValueError`` is raised if the surface pixels are
discontinuous.
'2' returns a (surface-width, surface-height) array of raw pixels.
The pixels are surface-bytesize-d unsigned integers. The pixel format is
surface specific. The 3 byte unsigned integers of 24 bit surfaces are
unlikely accepted by anything other than other pygame functions.
'3' returns a (surface-width, surface-height, 3) array of ``RGB`` color
components. Each of the red, green, and blue components are unsigned
bytes. Only 24-bit and 32-bit surfaces are supported. The color
components must be in either ``RGB`` or ``BGR`` order within the pixel.
'r' for red, 'g' for green, 'b' for blue, and 'a' for alpha return a
(surface-width, surface-height) view of a single color component within a
surface: a color plane. Color components are unsigned bytes. Both 24-bit
and 32-bit surfaces support 'r', 'g', and 'b'. Only 32-bit surfaces with
``SRCALPHA`` support 'a'.
The surface is locked only when an exposed interface is accessed.
For new buffer interface accesses, the surface is unlocked once the
last buffer view is released. For array interface and old buffer
interface accesses, the surface remains locked until the BufferProxy
object is released.
.. versionadded:: 1.9.2
.. method:: get_buffer
| :sl:`acquires a buffer object for the pixels of the Surface.`
| :sg:`get_buffer() -> BufferProxy`
Return a buffer object for the pixels of the Surface. The buffer can be
used for direct pixel access and manipulation. Surface pixel data is
represented as an unstructured block of memory, with a start address
and length in bytes. The data need not be contiguous. Any gaps are
included in the length, but otherwise ignored.
This method implicitly locks the Surface. The lock will be released when
the returned :mod:`pygame.BufferProxy` object is garbage collected.
.. versionadded:: 1.8
.. ## Surface.get_buffer ##
.. attribute:: _pixels_address
| :sl:`pixel buffer address`
| :sg:`_pixels_address -> int`
The starting address of the surface's raw pixel bytes.
.. versionadded:: 1.9.2
.. ## pygame.Surface ##
Generated by dwww version 1.15 on Wed Jun 26 01:03:48 CEST 2024.