.. include:: common.txt
:mod:`pygame.Rect`
==================
.. currentmodule:: pygame
.. class:: Rect
| :sl:`pygame object for storing rectangular coordinates`
| :sg:`Rect(left, top, width, height) -> Rect`
| :sg:`Rect((left, top), (width, height)) -> Rect`
| :sg:`Rect(object) -> Rect`
Pygame uses Rect objects to store and manipulate rectangular areas. A Rect
can be created from a combination of left, top, width, and height values.
Rects can also be created from python objects that are already a Rect or
have an attribute named "rect".
Any pygame function that requires a Rect argument also accepts any of these
values to construct a Rect. This makes it easier to create Rects on the fly
as arguments to functions.
The Rect functions that change the position or size of a Rect return a new
copy of the Rect with the affected changes. The original Rect is not
modified. Some methods have an alternate "in-place" version that returns
None but affects the original Rect. These "in-place" methods are denoted
with the "ip" suffix.
The Rect object has several virtual attributes which can be used to move and
align the Rect:
::
x,y
top, left, bottom, right
topleft, bottomleft, topright, bottomright
midtop, midleft, midbottom, midright
center, centerx, centery
size, width, height
w,h
All of these attributes can be assigned to:
::
rect1.right = 10
rect2.center = (20,30)
Assigning to size, width or height changes the dimensions of the rectangle;
all other assignments move the rectangle without resizing it. Notice that
some attributes are integers and others are pairs of integers.
If a Rect has a nonzero width or height, it will return ``True`` for a
nonzero test. Some methods return a Rect with 0 size to represent an invalid
rectangle. A Rect with a 0 size will not collide when using collision
detection methods (e.g. :meth:`collidepoint`, :meth:`colliderect`, etc.).
The coordinates for Rect objects are all integers. The size values can be
programmed to have negative values, but these are considered illegal Rects
for most operations.
There are several collision tests between other rectangles. Most python
containers can be searched for collisions against a single Rect.
The area covered by a Rect does not include the right- and bottom-most edge
of pixels. If one Rect's bottom border is another Rect's top border (i.e.,
rect1.bottom=rect2.top), the two meet exactly on the screen but do not
overlap, and ``rect1.colliderect(rect2)`` returns false.
.. versionadded:: 1.9.2
The Rect class can be subclassed. Methods such as ``copy()`` and ``move()``
will recognize this and return instances of the subclass.
However, the subclass's ``__init__()`` method is not called,
and ``__new__()`` is assumed to take no arguments. So these methods should be
overridden if any extra attributes need to be copied.
.. method:: copy
| :sl:`copy the rectangle`
| :sg:`copy() -> Rect`
Returns a new rectangle having the same position and size as the original.
New in pygame 1.9
.. ## Rect.copy ##
.. method:: move
| :sl:`moves the rectangle`
| :sg:`move(x, y) -> Rect`
Returns a new rectangle that is moved by the given offset. The x and y
arguments can be any integer value, positive or negative.
.. ## Rect.move ##
.. method:: move_ip
| :sl:`moves the rectangle, in place`
| :sg:`move_ip(x, y) -> None`
Same as the ``Rect.move()`` method, but operates in place.
.. ## Rect.move_ip ##
.. method:: inflate
| :sl:`grow or shrink the rectangle size`
| :sg:`inflate(x, y) -> Rect`
Returns a new rectangle with the size changed by the given offset. The
rectangle remains centered around its current center. Negative values
will shrink the rectangle. Note, uses integers, if the offset given is
too small(< 2 > -2), center will be off.
.. ## Rect.inflate ##
.. method:: inflate_ip
| :sl:`grow or shrink the rectangle size, in place`
| :sg:`inflate_ip(x, y) -> None`
Same as the ``Rect.inflate()`` method, but operates in place.
.. ## Rect.inflate_ip ##
.. method:: update
| :sl:`sets the position and size of the rectangle`
| :sg:`update(left, top, width, height) -> None`
| :sg:`update((left, top), (width, height)) -> None`
| :sg:`update(object) -> None`
Sets the position and size of the rectangle, in place. See
parameters for :meth:`pygame.Rect` for the parameters of this function.
.. versionadded:: 2.0.1
.. ## Rect.update ##
.. method:: clamp
| :sl:`moves the rectangle inside another`
| :sg:`clamp(Rect) -> Rect`
Returns a new rectangle that is moved to be completely inside the
argument Rect. If the rectangle is too large to fit inside, it is
centered inside the argument Rect, but its size is not changed.
.. ## Rect.clamp ##
.. method:: clamp_ip
| :sl:`moves the rectangle inside another, in place`
| :sg:`clamp_ip(Rect) -> None`
Same as the ``Rect.clamp()`` method, but operates in place.
.. ## Rect.clamp_ip ##
.. method:: clip
| :sl:`crops a rectangle inside another`
| :sg:`clip(Rect) -> Rect`
Returns a new rectangle that is cropped to be completely inside the
argument Rect. If the two rectangles do not overlap to begin with, a Rect
with 0 size is returned.
.. ## Rect.clip ##
.. method:: clipline
| :sl:`crops a line inside a rectangle`
| :sg:`clipline(x1, y1, x2, y2) -> ((cx1, cy1), (cx2, cy2))`
| :sg:`clipline(x1, y1, x2, y2) -> ()`
| :sg:`clipline((x1, y1), (x2, y2)) -> ((cx1, cy1), (cx2, cy2))`
| :sg:`clipline((x1, y1), (x2, y2)) -> ()`
| :sg:`clipline((x1, y1, x2, y2)) -> ((cx1, cy1), (cx2, cy2))`
| :sg:`clipline((x1, y1, x2, y2)) -> ()`
| :sg:`clipline(((x1, y1), (x2, y2))) -> ((cx1, cy1), (cx2, cy2))`
| :sg:`clipline(((x1, y1), (x2, y2))) -> ()`
Returns the coordinates of a line that is cropped to be completely inside
the rectangle. If the line does not overlap the rectangle, then an empty
tuple is returned.
The line to crop can be any of the following formats (floats can be used
in place of ints, but they will be truncated):
- four ints
- 2 lists/tuples/Vector2s of 2 ints
- a list/tuple of four ints
- a list/tuple of 2 lists/tuples/Vector2s of 2 ints
:returns: a tuple with the coordinates of the given line cropped to be
completely inside the rectangle is returned, if the given line does
not overlap the rectangle, an empty tuple is returned
:rtype: tuple(tuple(int, int), tuple(int, int)) or ()
:raises TypeError: if the line coordinates are not given as one of the
above described line formats
.. note ::
This method can be used for collision detection between a rect and a
line. See example code below.
.. note ::
The ``rect.bottom`` and ``rect.right`` attributes of a
:mod:`pygame.Rect` always lie one pixel outside of its actual border.
::
# Example using clipline().
clipped_line = rect.clipline(line)
if clipped_line:
# If clipped_line is not an empty tuple then the line
# collides/overlaps with the rect. The returned value contains
# the endpoints of the clipped line.
start, end = clipped_line
x1, y1 = start
x2, y2 = end
else:
print("No clipping. The line is fully outside the rect.")
.. versionadded:: 2.0.0
.. ## Rect.clipline ##
.. method:: union
| :sl:`joins two rectangles into one`
| :sg:`union(Rect) -> Rect`
Returns a new rectangle that completely covers the area of the two
provided rectangles. There may be area inside the new Rect that is not
covered by the originals.
.. ## Rect.union ##
.. method:: union_ip
| :sl:`joins two rectangles into one, in place`
| :sg:`union_ip(Rect) -> None`
Same as the ``Rect.union()`` method, but operates in place.
.. ## Rect.union_ip ##
.. method:: unionall
| :sl:`the union of many rectangles`
| :sg:`unionall(Rect_sequence) -> Rect`
Returns the union of one rectangle with a sequence of many rectangles.
.. ## Rect.unionall ##
.. method:: unionall_ip
| :sl:`the union of many rectangles, in place`
| :sg:`unionall_ip(Rect_sequence) -> None`
The same as the ``Rect.unionall()`` method, but operates in place.
.. ## Rect.unionall_ip ##
.. method:: fit
| :sl:`resize and move a rectangle with aspect ratio`
| :sg:`fit(Rect) -> Rect`
Returns a new rectangle that is moved and resized to fit another. The
aspect ratio of the original Rect is preserved, so the new rectangle may
be smaller than the target in either width or height.
.. ## Rect.fit ##
.. method:: normalize
| :sl:`correct negative sizes`
| :sg:`normalize() -> None`
This will flip the width or height of a rectangle if it has a negative
size. The rectangle will remain in the same place, with only the sides
swapped.
.. ## Rect.normalize ##
.. method:: contains
| :sl:`test if one rectangle is inside another`
| :sg:`contains(Rect) -> bool`
Returns true when the argument is completely inside the Rect.
.. ## Rect.contains ##
.. method:: collidepoint
| :sl:`test if a point is inside a rectangle`
| :sg:`collidepoint(x, y) -> bool`
| :sg:`collidepoint((x,y)) -> bool`
Returns true if the given point is inside the rectangle. A point along
the right or bottom edge is not considered to be inside the rectangle.
.. note ::
For collision detection between a rect and a line the :meth:`clipline`
method can be used.
.. ## Rect.collidepoint ##
.. method:: colliderect
| :sl:`test if two rectangles overlap`
| :sg:`colliderect(Rect) -> bool`
Returns true if any portion of either rectangle overlap (except the
top+bottom or left+right edges).
.. note ::
For collision detection between a rect and a line the :meth:`clipline`
method can be used.
.. ## Rect.colliderect ##
.. method:: collidelist
| :sl:`test if one rectangle in a list intersects`
| :sg:`collidelist(list) -> index`
Test whether the rectangle collides with any in a sequence of rectangles.
The index of the first collision found is returned. If no collisions are
found an index of -1 is returned.
.. ## Rect.collidelist ##
.. method:: collidelistall
| :sl:`test if all rectangles in a list intersect`
| :sg:`collidelistall(list) -> indices`
Returns a list of all the indices that contain rectangles that collide
with the Rect. If no intersecting rectangles are found, an empty list is
returned.
.. ## Rect.collidelistall ##
.. method:: collidedict
| :sl:`test if one rectangle in a dictionary intersects`
| :sg:`collidedict(dict) -> (key, value)`
| :sg:`collidedict(dict) -> None`
| :sg:`collidedict(dict, use_values=0) -> (key, value)`
| :sg:`collidedict(dict, use_values=0) -> None`
Returns the first key and value pair that intersects with the calling
Rect object. If no collisions are found, ``None`` is returned. If
``use_values`` is 0 (default) then the dict's keys will be used in the
collision detection, otherwise the dict's values will be used.
.. note ::
Rect objects cannot be used as keys in a dictionary (they are not
hashable), so they must be converted to a tuple.
e.g. ``rect.collidedict({tuple(key_rect) : value})``
.. ## Rect.collidedict ##
.. method:: collidedictall
| :sl:`test if all rectangles in a dictionary intersect`
| :sg:`collidedictall(dict) -> [(key, value), ...]`
| :sg:`collidedictall(dict, use_values=0) -> [(key, value), ...]`
Returns a list of all the key and value pairs that intersect with the
calling Rect object. If no collisions are found an empty list is returned.
If ``use_values`` is 0 (default) then the dict's keys will be used in the
collision detection, otherwise the dict's values will be used.
.. note ::
Rect objects cannot be used as keys in a dictionary (they are not
hashable), so they must be converted to a tuple.
e.g. ``rect.collidedictall({tuple(key_rect) : value})``
.. ## Rect.collidedictall ##
.. ## pygame.Rect ##
Generated by dwww version 1.15 on Wed Jun 26 01:19:29 CEST 2024.