****** Release of sane-backends 1.0.18. End of code freeze ******
2006-07-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Increased version number.
2006-07-02 Gerhard Jaeger <gerhard@gjaeger.de>
* backend/plustek.c: Fixed the fix (problem when trying to
select bit-depth).
2006-07-01 Wittawat Yamwong <wittawat@web.de>
* doc/sane-pixma.man doc/descriptions/pixma.desc:
Updated status of MP760 and MP780
2006-06-30 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update
* backend/plustek.c: Fixed problem when trying to select bit-depth.
2006-06-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Added dell1600n_net backend.
* doc/releases.txt: Typo fix.
* aclocal.m4 configure configure.in include/sane/config.h.in:
Disabled compilation warnings for release.
---- CODE FREEZE FOR SANE-BACKENDS 1.0.18 ---
2006-06-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Updated for 1.0.18.
2006-06-24 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.c: update to v1.0.33, add 5900 usb id
* doc/descriptions/fujitsu.desc: usb id and version update
2006-06-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/epson.desc: Fixed USB id of CX6600 (patch from
Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>).
* doc/descriptions-external/epkowa.desc: Updated (patch from
Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>).
* doc/descriptions/unsupported.desc: Added Xerox WorkCentre
PE120i.
2006-06-19 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-usb.man: Fixed typo (bug #303571).
2006-06-19 Giuseppe Sacco <eppesuig@debian.org>
* corrected sane-usb manual page.
2006-06-15 Ulrich Deiters <ulrich.deiters@uni-koeln.de>
* backend/canon.c, canon.h, canon-scsi.c, canon-sane.c:
got rid of some compiler warnings
2006-06-14 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.c: update to v1.0.32, add 4220c2 usb id
* doc/descriptions/fujitsu.desc: usb id and version update
2006-06-14 Jon Chambers <jon@jon.demon.co.uk>
* backend/dell1600n_net.c: working backend added
2006-06-13 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.[ch]: update to v1.0.31, add 5220c usb id,
don't show ink level buttons if no imprinter, gather button
presses more frequently
* doc/descriptions/fujitsu.desc: usb id and version update
2006-06-12 Jochen Eisinger <jochen@penguin-breeder.org>
* doc/descriptions/mustek_pp.desc: Added Micromaxx MM-0851
---- FEATURE FREEZE FOR SANE 1.0.18 ---
2006-06-11 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/coolscan2.c doc/descriptions/coolscan2.desc: Added
(minimal) support for Nikon LS 50 ED, Coolscan V ED and
(probably) Super Coolscan LS-5000 ED (patch from Giuseppe Sacco
<giuseppe@eppesuigoccas.homedns.org>).
* backend/pixma.h: Fixed compilation problem on *BSD (ENODATA not
defined).
* doc/descriptions/unsupported.desc: Added Canon 9950. Removed
Epson 4490 (supported by epkowa). Removed Nikon scanners
(supported by coolscan2 backend). Updated PLANon DocuPen R700.
2006-06-11 Eddy De Greef <eddy_de_greef at scarlet dot be>
* AUTHORS backend/mustek_pp_cis.c backend/mustek_pp_cis.h
doc/sane-mustek_pp.man: e-mail address update.
2006-06-11 Henning Meier-Geinitz <henning@meier-geinitz.de>
(patch applied by Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Added CX-4800. Added Perfection
4990 (bug #301795).
* backend/epson_usb.c: Added CX-4800 (bug #303341).
* backend/epson.c: Fixed segfault when a scanner isn't
recognized. Added "Flatbed" as the only possible source option for
MOD_SOURCE in this case (bug #303340).
Epson CX4800 and CX6400 were detected as "unknown model". This
changes request_identity2 to 0 in the EpsonCmdRec for the "D7"
level, which skips the call to get_identity2_information(). The
second bug was that the return status of
get_identity2_information() was not checked in attach(). This
actually allowed the scanner to be used but with inaccurate
parameters (e.g. "Unknown model", default color depth, etc)
because the scanner was already closed before probing for the rest
of the parameters (bug #301478, #303342).
The Epson Perfection 4990 photo/GT-X800 wrongly return 3200 dpi as
their maximum resolution. This workaround enables the full 4800
dpi (bug #302090, patch from Claus Boje <claus@egehuset.dk>).
* backend/epson.conf.in: Detect some more epson SCSI scanners
(GT-6000, GT-9000) which report "EPSON SC" instead of "EPSON" as
SCSI manufacturer ID (bug #303269).
* sanei/sanei_pio.c: Don't do a busy loop when looking for
scanners. This froze the backend when the scanner was switched
off. Also CPU time is much reduced (bug #301926).
2006-06-11 Gerard Klaver <gerard at gkall dot hobby dot nl>
* include/Makefile.in font_6x11.h added
2006-06-10 Wittawat Yamwong <wittawat@web.de>
* backend/pixma_mp750.c doc/sane-pixma.man
/doc/descriptions/pixma.desc:
Removed experimental flag from MP750, MP760 and MP780.
2006-06-09 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/sane-stv680.man update text
2006-06-09 m. allan noah <anoah AT pfeiffer DOT edu>
* frontend/scanimage.c: move sane_cancel() out of scan_it().
more like scanadf. fixes issues with duplex adf scanning.
2006-06-08 Wittawat Yamwong <wittawat@web.de>
* backend/pixma.h: Upgraded to version 0.11.3
* backend/pixma_common.c backend/pixma_common.h:
Added a work-around for the buffer underrun problem.
* backend/pixma_io_sanei.c: Set minimum timeout to 10ms.
* backend/pixma_mp150.c: Added 2 commands for MP800.
* backend/pixma_mp730.c: Added debug info.
* backend/pixma_mp750.c: Added support for buttons and a work-around
for the lockup problem.
* backend/pixma.c: Removed SANE_I18N from backend type string.
* doc/sane-pixma.man: Updated
* doc/descriptions/pixma.desc: Updated status of MP750.
2006-06-08 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update
* backend/plustek.c backend/plustek-usbcal.c
backend/plustek-usbcalfile.c backend/plustek-usbhw.c:
Fixed calibration cache issues (coarse calibration for all modes,
correct fine calibration for sheetfed devices).
2006-06-08 Mattias Ellert <mattias.ellert@tsl.uu.se>
* po/sane-backends.*.po: updated with new translation keys from
genesys backend.
2006-06-07 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys.c backend/genesys.h backend/genesys_low.h: added
options for enabling/disabling horizontal interpolation at high
resolutions and selection of color filter in grayscale and
lineart modes.
* backend/genesys_gl841.c: implemented color filter selection.
2006-06-07 Gerhard Jaeger <gerhard@gjaeger.de>
* configure, configure.in, backend/Makefile.in
include/sane/sanei_access.h sanei/Makefile.in
sanei/sanei_access.c: Added patch created by
Vitaly Lipatov <LAV AT vl3143.spb.edu>:
Add --with-lockdir to configure for set path to lock dir
Set PATH_SANE_LOCK_DIR really to lock dir (instead localstatedir)
* po/sane-backends.de.po: Update.
2006-06-06 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.[ch]: update to v1.0.30, init more models,
M3091/2 duplex support, flatbed bug fixes, minor refactoring
* doc/descriptions/fujitsu.desc: status and version update
* doc/sane-fujitsu.man: remove note about broken M3091/2 duplex
2006-06-06 Rene Rebe <rene@exactcode.de>
* backend/avision.c backend/avision.h backend/avision.conf.in
doc/descriptions/avision.desc doc/sane-avision.man: updated the
Avision backend (Build 182 -> 201), including a lot fixes,
some new features and support for a bunch of new devices and updates
to the status marks, including: control of the lamp power-save time,
retrieval of NVRAM data such as the scan counts and serial number,
correction of the quality vs. preview scan bit (was inverted),
fixes for the logic deciding whether the cached window parameters
are valid, yet another deinterlacing method (for new scanner
models), rewritten main loop to be able to read with larger
USB buffers for enhanced scan speed, fixes of BGR -> RGB mirroring
(was off-by-one), attaching without a config by probing all
known SCSI vendor/product IDs and some fixed typos on the way
2006-06-06 Mattias Ellert <mattias.ellert@tsl.uu.se>
* po/Makefile.in, po/sane-backends.*.po: updated with translation
keys from stv680 backend
* backend/Makefile.in: Fix stv680 dependencies
2006-06-05 Gerard Klaver <gerard at gkall dot hobby dot nl>
* backend/stv680.c backend/stv680.h backend/stv680.conf.in added
* doc/sane-stv680.man doc/descriptions/stv680.desc added
* AUTHORS: added stv680 Gerard Klaver
* configure configure.in doc/Makefile.in doc/sane.man
backend/Makefile.in backend/dll.conf.in: added stv680 backend
* doc/descriptions-external/stv680.desc: removed because the backend
is now a part of sane-backends.
2006-06-04 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.[ch]: update to v 1.0.29, option cleanups,
M3091/2 color mode support, sloppy buffer supports saned/scanimage -T
* backend/fujitsu-scsi.c: proper casting in macro
* doc/descriptions/fujitsu.desc: status and version update
* doc/sane-fujitsu.man: remove note about broken M3091/2 color
2006-06-03 Wittawat Yamwong <wittawat@web.de>
* backend/pixma_sane_options.c: Added SANE_I18N for "Flatbed" and "Color"
* backend/pixma_common.[ch]
backend/pixma_mp150.c backend/pixma_mp730.c
backend/pixma_mp750.c backend/pixma_rename.h
backend/pixma.h: Added pixma_get_device_status()
* backend/pixma.c: Fixed a bug in sane_open(). State wasn't initiallized
properly.
* doc/sane-pixma.man doc/descriptions/pixma.desc: Updated device status.
2006-06-01 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.[ch]: update to v 1.0.28
* doc/descriptions/fujitsu.desc: status and version update
2006-05-30 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.c: DBG speedup from abel deuring,
duplex bugfix, split scsi/usb data into new DBG level,
stop including or calling sanei_thread
* doc/descriptions/fujitsu.desc: minor update
* doc/sane-fujitsu.man: minor text changes, note DBG levels
2006-05-28 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/sane-plustek_pp.man: Fixed typo.
* doc/sane-plustek.man: Update.
* doc/descriptions/plustek.desc: Update.
* backend/plustek.c backend/plustek.h backend/plustek-usb.c
backend/plustek-usbcal.c backend/plustek-usbcalfile.c
backend/plustek-usbdevs.c backend/plustek-usb.h
backend/plustek-usbhw.c backend/plustek-usbimg.c
backend/plustek-usbio.c backend/plustek-usbmap.c
backend/plustek-usbscan.c backend/plustek-usbshading.c:
Added support for CIS-based sheetfed scanners, namely TravelScan662.
Added support for saving calibration data for CIS
devices - should speedup CanoScan devices.
2006-05-28 Wittawat Yamwong <wittawat@web.de>
* backend/pixma.h: Added #define ENODATA and EPROTO to let the
backend compiles under OS/2 with gcc 3.3.5.
2006-05-27 Giuseppe Sacco <eppesuig@debian.org>
* Updated italian translation
2006-05-27 Mattias Ellert <mattias.ellert@tsl.uu.se>
* tools/sane-desc.c: Added plist output
2006-05-26 Mattias Ellert <mattias.ellert@tsl.uu.se>
* po/Makefile.in, po/sane-backends.*.po: updated with translation
keys from pixma backend
2006-05-26 Wittawat Yamwong <wittawat@web.de>
* AUTHORS: added Wittawat Yamwong
* configure configure.in doc/Makefile.in doc/sane.man
doc/descriptions/pixma.desc backend/Makefile.in
backend/dll.conf.in backend/pixma*.[ch]: added pixma backend
* doc/descriptions-external/pixma.desc: removed because the backend
is now a part of sane-backends.
* sanei/sanei_usb.c: Modified sanei_read_int(): call
usb_clear_halt() if and only if the endpoint is halted.
2006-05-24 Mattias Ellert <mattias.ellert@tsl.uu.se>
* Updated Swedish translation
2006-05-23 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.c: don't send scsi cmd F1 if unsupported.
* doc/descriptions/fujitsu.desc: update version number.
2006-05-23 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Makefile.kernel26: Fixed extraction of version string.
2006-05-21 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.c backend/fujitsu.conf.in
doc/descriptions/fujitsu.desc: added usb ids for fi-5110EOX
2006-05-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.linux: Updated concerning USB permissions (really, this
time).
* doc/descriptions/unsupported.desc: Removed models that are now
in pixma.desc. Updated comment for Plustek OpticPro S24.
* doc/descriptions-external/hp_rts88xx.desc: Added reason for not
including the backend.
* backend/gt68xx.c backend/gt68xx_devices.c doc/gt68xx/gt68xx.CHANGES
doc/descriptions/gt68xx.desc: Added support for Plustek OpticPro
S24 (some models). Added .conf entry for Plustek OpticPro S12.
2006-05-19 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu*: use sanei_scsi_open_extended()
change config file var to "buffer-size", increase default
* doc/sane-fujitsu.man: buffer-size mentioned
2006-05-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/pixma.desc: Added some models (from
Wittawat Yamwong <wy-sane-devel@arcor.de>).
2006-05-14 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu.c: sane_read() - only send EOF with len=0
do_cmd() - simplify timeout handling
* backend/fujitsu-scsi.h: increase default timeoutes
2006-05-15 Stephane Voltz <stefdev@modulonet.fr>
* backend/genesys_devices.c backend/genesys_gl646.c: tuned HP 2300
geometry description and added a safeguard against failed origin
detection
2006-05-14 m. allan noah <anoah AT pfeiffer DOT edu>
* backend/fujitsu*: rewritten backend, supports many more scanners
with much better usb support and less model-specific code.
* doc/sane-fujitsu.man: updated to match new backend.
2006-05-12 m. allan noah <anoah AT pfeiffer DOT edu>
* doc/descriptions/fujitsu.desc: updated with all known scanners
by fujitsu. Most now supported as 'basic'.
2006-05-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/hotplug-ng/convert-usermap.sh
tools/udev/convert-usermap.sh: Removed. No longer needed as
hotplug-ng and udev files are generated by sane-desc now.
* tools/README tools/hotplug/README tools/hotplug-ng/README
doc/sane-usb.man: Updated documentation concerning udev.
* doc/descriptions/unsupported.desc: Added Epson Stylus CX-5800
and some PLANon scanners.
2006-05-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/lexmark.desc: X1150 is reported to work.
* doc/descriptions-external/brother.desc: MFC-3820CN is reported
to work.
2006-04-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/brother.desc
doc/descriptions-external/brother2.desc: Network models are now
supported (bug #303386).
2006-04-23 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys_devices.c: Increase length of acceleration
slopes for Canon LiDE 35/40/50/60
2006-04-21 Stephane Voltz <stefdev@modulonet.fr>
* backend/genesys.c: add workraound with issue related
to asic reset and data scan amount
2006-04-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/artec_eplus48u.conf.in: Made config file more
readable. Instead of commenting every single line, the
explanations are given once at the top. Don't repeat options
that aren't changed anyway.
* doc/descriptions/unsupported.desc: Added Microtek Scanmaker
3880.
2006-04-18 Giuseppe Sacco <eppesuig@debian.org>
* Updated italian translation
2006-04-18 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys_gl841.c backend/genesys_gl646.c: Actually use
the endian converted slope table.
* backend/genesys_conv_hlp.c: Fix interpolation code to emit all
pixels of a line.
* doc/descriptions/unsupported.desc: Added missing scanners from
libsane.usermap.
2006-04-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/epson.desc doc/descriptions/fujitsu.desc
doc/descriptions/hp.desc doc/descriptions/u12.desc
doc/descriptions/umax.desc: Added most USB vendor and product
ids. Minor cleanup.
* doc/descriptions/avision.desc: Used avision-desc.sh to update
the .desc file to current SANE CVS avision.c code. Added USB
ids.
* doc/descriptions/plustek.desc: Added USB ids. Split some
entries which have two different USB ids. Clarified comment about
UMAX 3400.
* tools/hotplug/libsane.usermap: Removed. Will be created
automatically by sane-desc.
* tools/Makefile.in: Create libsane.usermap (for hotplug),
libsane.db (for hotplug-ng) and libsane.rules (for udev)
automatically with sane-desc based on the :usbid tokens in the
description files.
* doc/Makefile.in: Don't print warnings when creating the HTML
scanner tables. The warnings are already printed in the tools
directory.
* doc/descriptions-external/brother.desc
doc/descriptions-external/brother2.desc: Point to current lists
on Brother website.
* tools/hotplug/.cvsignore tools/hotplug-ng/.cvsignore
tools/udev/.cvsignore: Added.
2006-04-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/umax1220u-common.c backend/umax1220u.c
doc/descriptions/umax1220u.desc doc/sane-umax1220u.man: Make
UMAX 2100U (and probably 1600U and 2000U) work. Code from Patrick
Lessard <palessar@cgocable.ca>. Updated manual page and .desc
file.
* AUTHORS: Added Patrick Lessard and Pierre Willenbrock.
* doc/descriptions/unsupported.desc
doc/descriptions-external/pixma.desc: Moved scanners supported
by the external pixma backend to pixma.desc. Added Canon PIXMA
MP730.
* doc/sane-mustek_usb2.man: Removed description of non-existing
configuration file.
2006-04-12 Julien Blache <jb@jblache.org>
* tools/sane-desc.c: Fix/optimize udev rules; tests on the same
line are ANDed together, not ORed together, causing the rules to
trigger more often than necessary.
2006-04-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* frontend/saned.c: If saned does not find any config file, it
calls fclose with a NULL FILE*. The code may also leak open file
descriptors and FILE's if multiple config files are found. (bug
#303339). Fixed possible segfault on close_handle() (bug
#303338).
* doc/descriptions/umax1220u.desc: Added links to Patrick
Lessard's patch.
* backend/qcam.c: Fixed undefined symbols in the qcam backend on
GNU/kFreeBSD (patch from Aurelien Jarno <aurelien@aurel32.net>).
* doc/descriptions/unsupported.desc: Added Lexmark X5150.
2006-04-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/brother2.desc: Added several scanners
from Brother website.
* doc/descriptions/unsupported.desc: Added C-Channel scanners.
* tools/hotplug/libsane.usermap: Added some scanners.
2006-03-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/sp15c.c: Fixed ADF support. Patch from Andreas Degert
<ad@papyrus-gmbh.de>.
* doc/descriptions-external/cs3200f.desc: Listed new cs3200f
backend for Canon 3200F.
* doc/descriptions/unsupported.desc: Added Canon PIXMA760, Tevion
MD 90090, Microtek ScanMaker 4600, and Visioneer Onetouch
9320. Removed Canon CanoScan 3200F (now in external backends).
2006-03-27 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys.c backend/genesys.h backend/genesys_low.h
backend/genesys_conv.c backend/genesys_gl841.c: Added extended
option "Threshold" for lineart mode(Thanks to Laurent Charpentier).
2006-03-24 Julien Blache <jb@jblache.org>
* doc/*: Another batch of spelling fixes from A. Costa.
2006-03-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Iris Iriscan and Xerox
Documate 510.
2006-03-21 Julien Blache <jb@jblache.org>
* doc/*.man: More spelling fixes from A. Costa (through Debian).
2006-02-02 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-scsi.c: Limit inquiry length to 120 bytes if
firmware is not yet loaded
2006-03-18 Julien Blache <jb@jblache.org>
* doc/sane-apple.man: Applied patch from A Costa (through Debian);
english/spelling fixes for sane-apple(5).
2006-03-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Microtek ScanMaker 4850
II and Plustek OpticPro ST 64+.
2006-03-12 Stephane Voltz <stefdev@modulonet.fr>
* backend/genesys_gl646.c: removed now unneeded #ifdef in
gl646_send_gamma_table.
2006-03-12 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys_gl646.c: fixed silly thinko in
gl646_send_gamma_table.
2006-03-12 Stephane Voltz <stefdev@modulonet.fr>
* backend/genesys_gl646.c: fixed gl646_send_gamma_table after
endianness changes. Put again a little fix for power saving
2006-03-11 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sanei/sanei_usb.c tools/sane-find-scanner.c: Added USB support
for DragonFlyBSD (bug #303183).
2006-03-09 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys.c backend/genesys_low.h: Removed little endian
conversions in slope table creation functions
* backend/genesys_gl646.c backend/genesys_gl841.c: Added little
endian conversions to gl*_send_slope_table functions
2006-03-09 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
* backend/genesys.c: Some annotations about endianness of scanned
data
* backend/genesys_gl646.c: Convert gamma tables to little endian
2006-03-06 Stephane Voltz <stefdev@modulonet.fr>
* backend/genesys_gl646.c: power saving fixes
2006-03-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/samsung.desc: Added USB ids for
SCX-4100 (bug #303166).
* doc/descriptions/unsupported.desc: Added Brother MFC 9600, Canon
PIXMA MP450, and Plustek ScanCopy 115.
2006-02-16 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-PARPORT.changes: Update.
* backend/plustek_pp.c: Bumped build number.
* backend/plustek-pp_ptdrv.c backend/plustek-pp_detec.c:
Fixed bug, that prevents backend from working, when the device
is another parport than parport0 - spotted by Christoph Steinbruchel.
2006-02-14 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/u12/U12.changes: Update.
* backend/u12.c: Bumped build number.
* backend/u12-hw.c: SoftwareReset is now disabled in
cancelSequence when the device is a Genius scanner.
2006-02-13 Stephane Voltz <stefdev@modulonet.fr>
* backend/genesys_gl646.c: disabled power saving for gl646.
2006-02-12 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.solaris: Added link to installation report.
* doc/descriptions/unsupported.desc: Removed HP ScanJet 8200
(supported by Avision backend). Minor updates.
2006-02-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Removed Trust Office Scan USB
19200 (now in niash.desc), added Xerox 4800 One Touch.
* include/sane/sanei_usb.h sanei/sanei_usb.c: Workaround for
compilation problem on Windows/cygwin.
* backend/dll.c: With cygwin, use ":" as DIR_SEP (patch from
Philip Aston <paston@bea.com>).
2006-02-04 Ullrich Sigwanz <usigwanz@freesurf.ch>
* backend/niash_xfer.c: Added Trust OfficeScan 19200
* doc/descriptions/niash.desc: Added Trust OfficeScan 19200
* backend/niash.c: Removed Reload on X,Y settings
2006-02-02 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan.h: Corrected USB ID for Benq 310
2006-01-31 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Bumped build number.
* backend/plustek-usbdevs.c: Fixed CanoScan N1220U settings.
2006-01-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/brother2.desc: Changed status of
Brother MFC-410CN to "basic" (bug #302961).
* doc/descriptions/unsupported.desc: Added Benq 7400UT and Genius
Colorpage CS.
2006-01-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/snapscan-usb.c: Added #defines for SHM_R/W for cygwin
(patch from Philip Aston <philipa@mail.com>).
* AUTHORS: Troy Rollo is now active.
2006-01-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/epkowa.desc: Updated to match
iscan-1.18.0. Added usb ids (patch from Olaf Meeuwissen
<olaf@member.fsf.org>).
* doc/descriptions/unsupported.desc: Added Scanshell 800N and
Canon Smartbase MP360.
* sanei/sanei_usb.c tools/sane-find-scanner.c: Added checks for
altsetting =! 0.
2006-01-22 Mattias Ellert <mattias.ellert@tsl.uu.se>
* backend/dll.c, backend/plustek-usbhw.c, backend/plustek-usbscan.c,
sanei/sanei_pio.c: Fixed warnings about C++ style comments.
* backend/hp5400_xfer.h: Fixed compilation warnings.
2006-01-21 Mattias Ellert <mattias.ellert@tsl.uu.se>
* backend/canon-sane.c: Fixed variable redeclaration.
2006-01-05 Stephane Voltz <stefdev@modulonet.fr>
* tools/hotplug/libsane.usermap: Added Dell A920 (rebranded X1100)
2006-01-19 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Bumped build number. Fixed constraint_type for
OPT_BUTTON.
* backend/plustek-usbdevs.c: Added high-speed setting for HP2200.
Cleanup.
2006-01-18 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.changes: Update.
* backend/plustek.c: Bumped build number.
* backend/plustek-usbdevs.c: Fixed CanoScan N670U settings,
see (bugreport #302738).
2006-01-15 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/canon630u.desc doc/descriptions/coolscan2.desc
doc/descriptions/hp5400.desc doc/descriptions/niash.desc
doc/descriptions/unsupported.desc: Added USB vendor and product
ids. Minor cleanup.
* backend/artec_eplus48u.conf.in doc/sane-artec_eplus48u.man
doc/descriptions/artec_eplus48u.desc: Added Yakumo Scan50. Minor
cleanup.
* doc/descriptions/gt68xx.desc: Added Mustek BearPaw 1248 CU.
* doc/descriptions/lexmark.desc: Added USB vendor and product
ids. Changed status of X1150 and X1170 according to reports on
sane-devel.
2006-01-15 Ulrich Deiters <ulrich.deiters@uni-koeln.de>
* backend/canon-sane.c: fixed byte-swapping problem for little-endian
platforms (affects raw-mode scanning with FS2710 slide scanner)
2006-01-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/check-usb-chip.c: Improved rts8822l-01h chipset
detection by adding check for descriptor.bcdUSB == 0x110 reported
by some scanners and accepting any value different to 0, read
from 0xfe11 register. Patch from Jonathan Bravo Lopez
<JKD@JKDSoft.cjb.net>.
* tools/sane-desc.c: Added "ignore" parameter to :usbid
token. Print warning if a backend defines USB models without
defining usbid. Print warning if a model doesn't have an
interface.
* doc/descriptions.txt: Added "ignore" parameter to :usbid
token.
* doc/descriptions-external/hpaio.desc doc/descriptions-external/hpoj.desc
doc/descriptions-external/samsung.desc: Updated comments. Added
usb ids or "ignore".
2006-01-10 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/snapscan.desc: Changed entries for duplicate USB IDs,
added Epson Stylus CX-1500
* backend/snapscan.c backend/snapscan-scsi.c: Added support for 12 bit
gamma tables for Epson CX-1500
* backend/snapscan.conf.in: Added Epson Stylus CX-1500
2006-01-10 Gerard Klaver <gerard at gkall dot hobby dot nl>
* doc/descriptions-external/stv680.desc: Added USB id.
added Creative webcam to list
2006-01-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/epkowa.desc: Film area guide mode of
4990 not supported (bug #302728).
* doc/descriptions-external/brother-mfc4600.desc
doc/descriptions-external/brother.desc
doc/descriptions-external/brother2.desc
doc/descriptions-external/hp3770.desc
doc/descriptions-external/hp3900.desc
doc/descriptions-external/hp8200.desc
doc/descriptions-external/hp_rts88xx.desc
doc/descriptions-external/mustek_a3p1.desc
doc/descriptions-external/primascan.desc
doc/descriptions-external/template.desc.
doc/descriptions-external/viceo.desc:
Added several USB ids. Added some more scanners. General cleanup.
2006-01-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/gt68xx.desc: Added USB id.
* doc/descriptions/unsupported.desc: Added interfaces to Panasonic
scanners.
2006-01-08 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/snapscan.desc: Added USB IDs
2006-01-08 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Xerox 4800.
* doc/descriptions.txt tools/sane-desc.c: Added support for
keyword :usbid. All output modes now print the usb vendor and
product modes. Added usermap, db, and udev output modes for
generating USB vendor/product lists for hotplug (ng) and Linux
udev. Added version information to html modes.
* doc/descriptions/gt68xx.desc: Added vendor and product ids for
all scanners.
* doc/descriptions/artec_eplus48u.desc
doc/descriptions/genesys.desc doc/descriptions/hp3500.desc
doc/descriptions/hp4200.desc doc/descriptions/ma1509.desc
doc/descriptions/microtek2.desc doc/descriptions/mustek_usb.desc
doc/descriptions/mustek_usb2.desc doc/descriptions/sm3600.desc
doc/descriptions/sm3840.desc doc/descriptions/template.desc.
doc/descriptions/umax1220u.desc doc/descriptions/unsupported.desc
doc/descriptions-external/template.desc.:
Added USB vendor and product ids. Minor cleanups.
2006-01-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Medion MD 85264 finger
print sensor and Trust Office Scan USB 19200.
* doc/descriptions-external/brother2.desc
tools/hotplug/libsane.usermap: Brother DCP-7010 is reported to
work (bug #302862).
* tools/check-usb-chip.c: Print version information when detecting
chip sets.
* sanei/sanei_usb.c: Added warning if libusb support is not built
in and some more debug messages.
* doc/descriptions-external/hp3900.desc: Status of HP ScanJet 4070
Photosmart is now minimal.
* tools/sane-desc.c: Added new output mode: statistics. This mode
prints overal statistics about known devices. Added support for
more than one search directory. Removed support for deprecated
backend status ("alpha", "beta" ...). Ran indent -gnu. HTML
output (backends and mfgs) prints statistics now. Unify status
and device type strings. Simplified status and device type
string printing. Removed any remaining links of backend status.
2006-01-06 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-scsi.c backend/snapscan-options.c backend/snapscan.c:
Some fixes for the Epson Stylus CX1500
2006-01-05 Stephane Voltz <stefdev@modulonet.fr>
* backend/umax_pp_low.c: removed unused local variable
2006-01-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/Makefile.in backend/abaton.conf backend/abaton.conf.in
backend/agfafocus.conf backend/agfafocus.conf.in
backend/apple.conf backend/apple.conf.in backend/artec.conf
backend/artec.conf.in backend/artec_eplus48u.conf
backend/artec_eplus48u.conf.in backend/avision.conf
backend/avision.conf.in backend/bh.conf backend/bh.conf.in
backend/canon.conf backend/canon.conf.in backend/canon630u.conf
backend/canon630u.conf.in backend/canon_pp.conf
backend/canon_pp.conf.in backend/coolscan.conf
backend/coolscan.conf.in backend/coolscan2.conf
backend/coolscan2.conf.in backend/dc210.conf
backend/dc210.conf.in backend/dc240.conf backend/dc240.conf.in
backend/dc25.conf backend/dc25.conf.in backend/dll.conf
backend/dll.conf.in backend/dmc.conf backend/dmc.conf.in
backend/epson.conf backend/epson.conf.in backend/fujitsu.conf
backend/fujitsu.conf.in backend/genesys.conf
backend/genesys.conf.in backend/gphoto2.conf
backend/gphoto2.conf.in backend/gt68xx.conf
backend/gt68xx.conf.in backend/hp.conf backend/hp.conf.in
backend/hp4200.conf backend/hp4200.conf.in backend/hp5400.conf
backend/hp5400.conf.in backend/hpsj5s.conf
backend/hpsj5s.conf.in backend/ibm.conf backend/ibm.conf.in
backend/leo.conf backend/leo.conf.in backend/lexmark.conf
backend/lexmark.conf.in backend/ma1509.conf
backend/ma1509.conf.in backend/matsushita.conf
backend/matsushita.conf.in backend/microtek.conf
backend/microtek.conf.in backend/microtek2.conf
backend/microtek2.conf.in backend/mustek.conf
backend/mustek.conf.in backend/mustek_pp.conf
backend/mustek_pp.conf.in backend/mustek_usb.conf
backend/mustek_usb.conf.in backend/nec.conf backend/nec.conf.in
backend/net.conf backend/net.conf.in backend/pie.conf
backend/pie.conf.in backend/plustek.conf backend/plustek.conf.in
backend/plustek_pp.conf backend/plustek_pp.conf.in
backend/qcam.conf backend/qcam.conf.in backend/ricoh.conf
backend/ricoh.conf.in backend/s9036.conf backend/s9036.conf.in
backend/saned.conf backend/saned.conf.in backend/sceptre.conf
backend/sceptre.conf.in backend/sharp.conf backend/sharp.conf.in
backend/sm3840.conf backend/sm3840.conf.in backend/snapscan.conf
backend/snapscan.conf.in backend/sp15c.conf
backend/sp15c.conf.in backend/st400.conf backend/st400.conf.in
backend/tamarack.conf backend/tamarack.conf.in
backend/teco1.conf backend/teco1.conf.in backend/teco2.conf
backend/teco2.conf.in backend/teco3.conf backend/teco3.conf.in
backend/test.conf backend/test.conf.in backend/u12.conf
backend/u12.conf.in backend/umax.conf backend/umax.conf.in
backend/umax1220u.conf backend/umax1220u.conf.in
backend/umax_pp.conf backend/umax_pp.conf.in backend/v4l.conf
backend/v4l.conf.in:
Renamed backend configuration files from *.conf to
*.conf.in. The configuration files are preprocessed by
backend/Makefile now and variables like @DATADIR@ are substituted
by the appropriate directories. This is especially useful for
firmware locations. For the firmware paths for the artec_eplus48u,
gt68xx, and snapscan backends variables were used. Bug #302590.
Regenerate .conf files only if .conf.in were changed.
* backend/.cvsignore: Added *.conf.
* README.linux: Mentioned udev.
* doc/backend-writing.txt: New chapters about the build system and
the files and directories of sane-backends. Fixed building
instructions for tstbackend. Mentioned that sane_* symbols
should be only used for API symbols.
* testsuite/Makefile.in testsuite/README testsuite/testfile.pnm:
Changed testsuite to use the test backend instead of the pnm
backend. This actually works with current sane-backends.
* PROBLEMS: Removed pnm problem description. It's not relevant for
normal users and explained in the sane-pnm man page anyway.
* backend/genesys.c: Fixed some compilation warnings.
* tools/hotplug/libsane.usermap: Added Hewlett-Packard PSC 1210.
2006-01-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane.tex: Corrected formula for calculation of
bytes_per_line in chapter 4.3.8 sane_get_parameters.
New version: 1.04.
2006-01-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/microtek2.c backend/microtek2.h: Fixed problem with
option "resolution" which exists twice at the same time. Bug
#302466.
* tools/hotplug/libsane.usermap: Added Canon LiDE 60 (bug
#302830).
* backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c
backend/gt68xx_high.c doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Added Plustek
OpticPro S(T)12 (product id 0x040b). Mostly untested. Print
warmup message 5 seconds after starting the warm-up.
* doc/descriptions/unsupported.desc: Added Visioneer 9450
USB. Updated comments for Plustek S(T)12.
* backend/test.c backend/test.conf backend/test.h
doc/sane-test.man doc/descriptions/test.desc:
Added option "source" which can be used to simulate an Automatic
Document Feeder (ADF). Added copyright header to test.h.
* frontend/scanimage.c: Don't create and delete a file in batch
mode if the document feeder is empty or if CTRL-D is pressed in
prompt mode. This change avoids deleting existing files. For an
explanation, see bug #302797.
2006-01-01 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* backend/snapscan-data.c backend/snapscan-options.c backend/snapscan.c
doc/descriptions/snascan.desc:
Added (static) calibration data for Benq 5150 / 5250
* backend/snapscan.h backend/snapscan.conf:
Added preliminary support for Epson Stylus CX 1500
* backend/Makefile.in: Added snapscan-data.c
2005-12-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/scanwit.desc: Added "(Acer)" to
manufacturer name (bug #302801).
* doc/descriptions/unsupported.desc: Added/updated several old
Acer (Benq) and Agfa parport scanners.
2005-12-28 Henning Meier-Geinitz <henning@meier-geinitz.de>
* tools/hotplug/libsane.usermap: Added Brother MFC 8440.
* Makefile.in: make libcheck now also checks for non standard sane
symbols (sane_*).
* doc/descriptions/unsupported.desc: HP Scanjet 3690 uses GL646_HP
chipset.
2005-12-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README.linux: Mention ld.so.conf issue.
* doc/descriptions/unsupported.desc
doc/descriptions-external/hp3900.desc: Added external hp3900
backend. Moved (possibly) supported scanners from
unsupported.desc.
* doc/backend-writing.txt: Added some hints about what to do to add
a new backend to the existing sane-backends code.
2005-12-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Lexmark X2330.
2005-12-23 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Canon Pixma MP500.
* README.openbsd: Added hint about CPPFLAGS.
* doc/descriptions/artec.desc: Changed status of Artec AT6 to
"good" as reported in bug #302749.
* tools/hotplug/libsane.usermap: Added Brother MFC-7420.
2005-12-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/dll.c doc/descriptions/dll.desc: Fixed dynamic loading
on current HP/UX systems (bug #302732).
* AUTHORS ChangeLog configure configure.in backend/Makefile.in
backend/dll.conf backend/hp3500.c doc/Makefile.in
doc/sane-hp3500.man doc/sane.man doc/descriptions/hp3500.desc:
Added hp3500 backend which supports the HP ScanJet 3500 series,
including the 3500C, 3530C and 3570C (patch from Troy Rollo
<sane@troy.rollo.name>) (bug #302687).
* doc/descriptions-external/hp3500.desc: Deleted.
* doc/descriptions/hp4200.desc doc/descriptions/lexmark.desc
doc/descriptions/mustek_usb2.desc: Removed "NEW!" markers.
2005-12-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* Makefile.in: List ChangeLog-1.0.17 in DISTFILES.
* configure configure.in: Changed version to 1.0.17-cvs. Enabled
compilation warnings.
* doc/descriptions-external/brother2.desc: Added Brother MFC-215C.
Older entries can be found in ChangeLog-1.0.17.
Generated by dwww version 1.15 on Sun Jun 23 20:48:40 CEST 2024.