LaTeX2RTF
*********
This file documents LaTeX2RTF, a converter that translates LaTeX to RTF.
Copyright 1998-2002 Georg Lehner, updates Copyright 1999-2018 by
Wilfried Hennings and Scott Prahl, with contributions by Mikhail
Polianski.
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "Copying" and "GNU General Public License"
are included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the Free Software Foundation.
1 Introduction
**************
LaTeX2RTF is a translator program from LaTeX text into "rich text
format" files. These files are commonly referred to as RTF files. RTF
is a published standard format by Microsoft. This standard can be
ambiguous in places and Microsoft ignores parts of the standard it finds
inconvenient, but RTF is widely used by many WYSIWIG text editors and is
supported by Microsoft Word and most text processors.
LaTeX2RTF translates the text and as much of the formatting
information from LaTeX to RTF. Be forewarned that the typeset output is
not nearly as good as what you would get from using LaTeX directly. So,
why bother translating? Consider,
1. You use LaTeX and hate everything beginning with MS-...
Nevertheless, you have to share your documents with people who
don't even know that there are alternatives to MS-...
2. You know somebody who frequently sends you very fine LaTeX
documents. Unfortunately, you are "on the other side" and need to
import her files, steal some part, and then desktop publish it in
your fine MS-... environment.
3. You like LaTeX and BibTeX. You interact with the rest of the world.
You know someone that wants to include your writing in a Word
document.
There are drawbacks to the conversion process. In fact, don't expect
any LaTeX file to be converted as you would like, don't expect it to be
converted without errors or warnings, and don't be especially surprised
when it doesn't convert at all. LaTeX2RTF is known to have many bugs
and many missing features. Paradoxically, this number seems to grow
more and more with each day. However, we can categorically state that
there are some special cases in which a LaTeX file will be translated to
RTF satisfactorily by LaTeX2RTF--This was sort of disclaimer, ok? OK!
LaTeX is a system for typesetting text and therefore it focuses on
the logical structure of a document, whilst RTF is meant to be a
transport format for a family of Desktop Publishing Software, dealing
mostly with the design of a text.
Although the commands and styles in LaTeX are much more flexible and
standardized than in RTF, only a small subset of commands has been
implemented to date (*note Unimplemented Features::).
Some of the capabilities of LaTeX2RTF are restricted in scope or
buggy (*note Known Bugs::).
RTF is a moving target, because Microsoft does not stop inventing new
extensions and features; consequently you cannot view newer RTF files
with older word processors. The syntax and semantics of RTF are
somewhat artistic, i.e., you can generate a syntactically correct RTF
file that cannot be displayed by some/most word processors. For more
details on RTF the specification consult the links at
<http://latex2rtf.sf.net/>
2 Installation
**************
2.1 General
===========
The documentation of the program is found in the 'doc/' directory in the
file 'latex2rtf.texi' in the GNU TeXInfo format. For your convenience,
you can find HTML and PDF versions of the manual there as well.
Note: In this manual, the terms "directory" and "folder" are used
interchangeably.
2.2 Obtaining LaTeX2RTF
=======================
LaTeX2RTF is available for many Unix Platforms, for the Macintosh, and
for MS-DOS, including all versions of MS Windows.
The latest version of LaTeX2RTF is available at SourceForge
(http://sourceforge.net/projects/latex2rtf/) and -- with some delay --
on CTAN sites: e.g., <http://www.dante.de> or <http://www.ctan.org>.
The DOS package will also run under all MS Windows versions up to
Windows 7, except 64bit systems. It requires an i386 processor or
better.
It should only be used on older Microsoft systems.
For Win9x, ME, NT, or newer, you should use the win or win-NO-GUI
package.
The win-NO-GUI package only runs under Win32 (Win9x, ME, NT, 2000,
XP, 2003, Vista, Win7, probably Win8 and Win10). From LaTeX2RTF version
2.0.0 up it also runs on 64bit systems.
The win package is the win-NO-GUI package plus graphical user
interface (GUI) shell (l2rshell) and installer.
It only runs under Win NT, 2000, XP, 2003, Vista, Win7 and newer.
From LaTeX2RTF version 2.0.0 up it also runs on 64bit systems.
The win64 package (only LaTeX2RTF version 1.9.19) is the win package
but with 32bit versions of the shell utilities so that it also runs on
64bit systems. From LaTeX2RTF version 2.0.0 up, there is no separate
win64 package, as the win32 package also runs on 64bit systems.
There are a few people working on LaTeX2RTF, and some more make
contributions, coordinated by Wilfried Hennings (texconvfaq "at"
gmx.de). See the SourceForge
(http://sourceforge.net/projects/latex2rtf/) project pages for the
latest news.
2.3 UNIX
========
To install,
1. Edit 'MAKEFILE' for your local configuration. In particular, pay
attention to the 'DESTDIR' variable (MAKEFILE line 21). If you do
not have root access you might wish to set the makefile variable
'DESTDIR' to be your home directory.
On some machines the cc compiler will issue errors. Therefore the
default compiler command in the Makefile is 'CC=gcc'.
2. From version 1.9.13 up, LaTeX2RTF supports conversion of LaTeX
equations to bitmaps using the shell script 'latex2png', found in
'scripts/'. 'latex2png' requires that LaTeX, 'Ghostscript' and
'ImageMagick' are installed. LaTeX2RTF will translate documents
without a working 'latex2png', but some features will be missing.
You can verify that the 'latex2png' script is working by typing
'make' in the 'scripts/' directory.
3. 'make'
If this is not your first time installation, you may want to
preserve your old configuration ('*.cfg') files. Copy them to a
safe place before installing.
On IBM AIX, the IBM make utility does not support some of the
commands used in Makefile. In this case use 'gmake' (from GNU)
instead.
Sun has decided to support the XPG4 standard on Solaris by an
alternative set of binaries. To allow bitmap conversion of
equations, two things are needed. First, change the first line of
latex2png to '#!/usr/xpg4/bin/sh' Second, define the XPG4_GREP
environment variable accordingly, for bash-like shells
'XPG4_GREP=/usr/xpg4/bin/grep; export XPG4_GREP' or for tsch-like
shells 'setenv XPG4_GREP /usr/xpg4/bin/grep'.
4. 'make install'
Note that the Makefile does not contain a rule for make uninstall.
This is by design.
On modern Linux distributions, you would prefer to install
LaTeX2RTF by the package manager of your distribution, which also
provides an easy means for update and uninstallation.
If your package manager does not provide the LaTeX2RTF package or
you need to install LaTeX2RTF from the sources for some other
reason, you should consider using 'checkinstall' which creates a
package for your package manager which then can be installed and
uninstalled by the package manager.
If you nevertheless need to run 'make install', note the following:
If your 'mkdir' doesn't support the '-p' option, then create the
necessary directories by hand and remove the option from the
'$MKDIR' variable. If you have other problems, just copy
'latex2rtf' and 'latex2png' to a binary directory, and move the
contents of the 'cfg/' directory to the location specified by
'$CFG_INSTALL'.
5. 'make check'
[OPTIONAL] This tests LaTeX2RTF on a variety of LaTeX files.
Expect a whole lot of warnings, but no outright errors. (On IBM
AIX, use 'gmake check'.) Note that this will check the basic
functionality of the 'latex2png' script, and then that of
'latex2rtf'.
6. 'make install-info'
[OPTIONAL] This installs '.info' files for use with the 'info'
program.
You no longer need to define the environment variable 'RTFPATH'.
This is only necessary if you move the directory containing the '.cfg'
files. Just define 'RTFPATH' to be the path for the new location of the
'cfg' directory.
2.4 plain DOS
=============
The UNIX and Mac packages do not contain an executable for DOS or
Windows. You may compile it yourself (with djgpp or MinGW) or get the
DOS package as file 'latex2rtf-x.x.x_dos.zip' (where x.x.x is the
version number)
or the win-NO-GUI package as file 'latex2rtf-x.x.x_win-NO-GUI.zip' (no
installer, no graphical user interface (GUI))
from SourceForge (http://sourceforge.net/projects/latex2rtf/)
The DOS package contains a precompiled executable which should run
under plain DOS and also in the command prompt (or "console") of any MS
Windows system including Vista and Windows 7 but not on 64bit systems.
To install the DOS or win-no-GUI package of LaTeX2RTF, extract all
files from the zip archive, preserving the folder structure (winzip:
check "use folder names"), preferably to 'C:\l2r', or under Windows, to
your "Program Files" folder (which ever it is named in your system)
because then it will find its cfg files by default.
If you extracted them to another folder (e.g. 'C:\my_files\l2r'), either
edit the file 'L2RPREP.BAT' and change the folder 'C:\l2r' to where you
put them, or specify the path to the cfg folder in the command line.
Avoid blanks in folder and file names!
Make sure that the folder containing the file 'L2RPREP.BAT' is in
your search path, or put this file into a folder which is in your search
path.
To display the current search path, enter 'PATH' from the command prompt
(with no arguments).
Under plain DOS, conversion of equations or figures to bitmaps is not
possible because Ghostscript and ImageMagick are not available for plain
DOS.
2.5 MS Windows systems
======================
To install LaTeX2RTF on a MS Windows system (WinNT, Win2000, WinXP,
Vista, Win7), download the win package, execute the
'latex2rtf-x.x.x_win.exe' (where x.x.x is the version number) and follow
the instructions.
Note: The installer and GUI shell do not support Win9x and WinMe
since LaTeX2RTF v.1.9.17. If you have one of these systems, you should
use the win-NO-GUI package (1.9.19 and up) of LaTeX2RTF.
To start the program double-click the LaTeX2RTF icon, or drag and
drop a '.tex' file onto the icon.
If your LaTeX document refers to external graphic files, e.g. eps, or
you want to use the option to convert equations to bitmaps, you must
have LaTeX, ImageMagick and Ghostscript installed. These programs are
freely available for download at <http://www.miktex.org/>,
<http://www.imagemagick.org> and <http://www.ghostscript.com>
The following versions were available at the time of writing and
tested with LaTeX2RTF version 2.3.11:
- MikTeX 2.9
- Ghostscript 9.19
- ImageMagick-7.0.1-8-Q16-x86-dll.exe
When installing ImageMagick, be sure to choose (check)
"Install legacy utilities (e.g. convert)"
If MikTeX, ImageMagick and Ghostscript are installed, the paths to
their executables are detected automatically. If for any reason this
doesn't happen, these paths can be specified manually in the
"Environment" tab of the LaTeX2RTF GUI shell window.
If you need to start LaTeX2RTF not from its own shell but from
commandline or another Windows application, you need to add the folder
containing the latex2png script and the helper programs to the search
path.
Some applications (e.g. Lyx) allow to temporarily add the path by
specifying it in the options.
If this is not possible, you can add the latex2rtf folder to Windows'
default path like follows:
To add a folder - e.g. C:\Program Files\latex2rtf - to the search
path:
* Note that the folder name "Program Files" contains a blank. This
would lead to some problems as some parts of the latex2rtf program
package interpret the blank as a parameter delimiter. Therefore in
the following example the folder name "Program Files" is replaced
by its DOS equivalent "PROGRA~1" which has the additional effect
that this is similar for several if not all European languages.
* Win95, Win98, WinME
* Open the file 'C:\AUTOEXEC.BAT' either with Edit (DOS) or with
Notepad (Windows).
* At the end of that file, add the line
'PATH=C:\PROGRA~1\latex2rtf;%PATH%'
* Save the file to its original location. Shutdown and reboot
the PC.
* WinNT, Win2000, WinXP, Vista, Win7
* Right-click "My Computer" (German: "Arbeitsplatz"), then
select "Properties";
* NT: Click the "Environment" tab;
XP and up: Click the "Advanced" tab, then the "Environment
variables" button;
* Find the line beginning with 'PATH=' and insert the string
'C:\PROGRA~1\latex2rtf;'
so that the complete line looks like
'PATH=C:\PROGRA~1\latex2rtf;C:\WINDOWS;...'
* Click "OK"
If you do NOT use the GUI (l2rshell.exe), either the folders where
TeX, ImageMagick and Ghostscript are installed must also be in your
search path, or you must edit the file 'L2RPREP.BAT', ensure that the
pathes in this file point to the folders where TeX, ImageMagick and
Ghostscript are installed on your machine, and call 'l2rprep' before
calling 'latex2rt'.
Or you edit 'l2r.bat' and call 'l2r' instead of calling 'latex2rt'.
If you DO use the GUI (l2rshell.exe), the TeX, ImageMagick and
Ghostscript folders are automatically added to the search path by the
GUI.
When equations are to be converted to bitmaps, for each equation
LaTeX2RTF first writes a temporary l2r_nnnn.tex file to disk which
consists of only the equation to be converted. It then sends the call
for '"bash latex2png l2r_nnnn.tex"' to the operating system.
In previous versions of latex2rtf, some users got the message "Out of
environment space" (can occur only under Windows 95, Windows 98 or
Windows ME); this should be solved now by using bash.exe instead of
command.com.
2.6 Macintosh
=============
If you want a MacOS X version, make sure that you have installed the
developer tools CD that is appropriate for your OS version, and then
follow the directions above for a UNIX installation. Alternatively you
can install using fink <http://www.finkproject.org/> and
<http://sourceforge.net/projects/fink/>.
As of 2006-01-30 there was a GUI shell for Macintosh at
<http://www.inf.ethz.ch/personal/fischerk/LaTeX2rtf/index.html>
but now (Nov. 2013) this is not available anymore.
There is a PPC port of an old version 1.9k for Classic MacOS
LaTeX2RTF. To convert a LaTeX file using this version, drag the file
onto the LaTeX2RTF icon. The translation is best if there are '.aux'
and '.bbl' files in the same folder as the '.tex' file to be converted.
These should be generated using LaTeX and 'bibtex'.
2.7 Problems Compiling
======================
The code for LaTeX2RTF is standard ANSI C. Some possible pitfalls are
* Not correctly defining your compiler in the Makefile. The default
is to use 'gcc'.
* Encountering errors because the compiler options. During
development all compiler warnings are turned on. However,
different compilers have different interpretations of '-Wall' and
may generate errors that were not found in a different development
system. Please report these, but a quick fix is to remove all
compiler options.
2.8 Problems with 'make check'
==============================
All the files in the 'test' directory are converted (with varying
degrees of success) using LaTeX2RTF and are tested before most CVS
check-ins and with all released tarballs. There will be many warning
messages, but there should be no actual error messages. If you do not
have a working latex2png script, then some of the files will fail to be
translated.
3 Using LaTeX2RTF
*****************
3.1 General Assumptions
=======================
LaTeX2RTF assumes that the '.tex' file you want to convert is a valid
LaTeX document. The chances of a successful LaTeX2RTF conversion are
slightly better than the proverbial snowball's if the '.tex' file
doesn't 'latex' properly. Use LaTeX to find and correct errors before
using LaTeX2RTF.
LaTeX2RTF also needs the '.aux' file and '.bbl' file which are generated
by running 'latex' on the '.tex' file
To correctly convert font names you must edit the 'fonts.cfg'
configuration file. This file is used to specify the needed font names
and how the LaTeX default font names should be converted to RTF (*note
Font Configuration::). LaTeX variables and user defined commands are
not evaluated. They will be simply ignored. To let LaTeX2RTF know the
names of variables you can add them in the 'ignore.cfg' file (*note
Ignore Command::).
The environment variable RTFPATH may contain a search path for the
support files (all files ending in '.cfg'). If no file is found during
the search in the search-path or if the environment variable is not set,
the compiled-in default for the configuration-file directory is used.
If the files are not found at all the program aborts.
In the DOS and Windows versions the search path is separated by ';'
in the Unix version by ':'. For the paths themselves apply '\' and '/'.
A separator may appear at the beginning or ending of RTFPATH.
Make sure that the configuration files are in the correct directory
(or folder). LaTeX2RTF will need at least 'fonts.cfg', 'direct.cfg',
'ignore.cfg', 'english.cfg'. You may have to change one ore more of
them to suit your needs (*note Configuration::).
*Note Missing options::, for actual implementations irregularities.
*Note Reporting Bugs::, for information on how to reach the
maintainer.
3.2 LaTeX2RTF Options
=====================
The LaTeX2RTF command converts a LaTeX file into RTF text format. The
text and much of the formatting information is translated to RTF making
the new file look similar to the original. The command line syntax is:
latex2rtf [-options] inputfile[.tex]
for the DOS and Windows versions:
latex2rt [-options] inputfile[.tex]
The options set in the Windows GUI (l2rshell.exe) are inserted as
command line options when clicking RUN.
The '-options' may consist of one or more of the following
'-a auxfile'
specify an '.aux' file (for table and figure references) that
differs from 'inputfile.aux'. If this is omitted, the name of the
inputfile with the suffix replaced '.aux''will be taken. You must
provide both files ('.tex' and the '.aux') to be able to convert
cross-references in a LaTeX file. The '.aux' is created by running
the 'inputfile.tex' through 'latex'.
'-b bblfile'
Unless an 'bblfile' is specified with the '-b' option, LaTeX2RTF
uses a 'inputfile.bbl'. The 'bblfile' file is used for citations
and is typically created by running 'inputfile.aux' through
'bibtex'.
'-C codepage'
used to specify the character set (code page) used in the LaTeX
document. This is only important when non-ansi characters are
included in the LaTeX document. Typically this is done in a
LaTeX2e file by using '\usepackage[codepage]{inputenc}' and in this
case you need not specify the -C codepage option. If NO
'\usepackage[codepage]{inputenc}' is in the LaTeX2e file, you must
inform the converter about the codepage by the -C codepage option.
You may select any of the following code pages: ansinew, applemac,
cp437, cp437de, cp850, cp852, cp865, decmulti, cp1250, cp1252,
latin1, latin2, latin3, latin4, latin5, latin9, next. The default
behavior is to use ansinew (code page 1252). Cyrillic support
includes conversion of koi8-r, koi8-u, cp1251, cp855, cp866,
maccyr, and macukr encodings.
'-d debug_level'
The '-d' option determines the amount of debugging information to
send to stderr while translating. debug_level=0 means only Errors,
'1' Warning Messages (default) also. The debug_level can go as
high as '7' for insane amounts of debugging fun. Warnings and
error messages are output to stderr and by default listed in the
console window. They can be redirected to a file "latex2rtf.log"
by appending '2>latex2rtf.log' to the command line.
'-D dots_per_inch'
used to specify the number of dots per inch for equations converted
to bitmaps. This value is also used when picture environments are
converted to bitmaps as well as when EPS graphics are converted to
png files. The default value is 300 dots per inch.
'-E#'
selects whether figures are included in the rtf (default) or
created as external files with the filenames inserted in the rtf
text.
The options -E4, -E8 and -E12 are experimental and may not work as
expected.
'-E0'
Do not include any figures in RTF.
'-E1'
Include figures that need no conversion.
'-E2'
Include figures that need conversion.
'-E3'
Include all figures (default).
'-E4'
Insert filenames for figures that do not need conversion.
'-E8'
Insert filenames for figures that need conversion.
'-E12'
Insert filenames for all figures.
With options -E8 and -E12, pdf and ps graphics as well as tikz
graphics are converted to eps and the eps filenames inserted in the
document text. With -E4 and -E12, bitmap files are inserted in
their original format. After opening the rtf in a textprocessing
or dtp program, a macro can search for the inserted filenames and
insert the files in their places. Further info is in the
description of the -M option.
'-f#'
where # selects which fields to use during conversion:
'-f0'
do not use fields in RTF. This is handy when primitive RTF
editors are being used to view the RTF output.
'-f1'
use fields for equations but not '\ref' and '\cite'.
'-f2'
use fields for '\ref' and '\cite' but not equations. This
will be useful for versions of OpenOffice that import
cross-references properly (as of Sept 2003 in a soon-to-be
released version) but do not properly handle fields in
equations.
'-f3'
use fields when possible. This is the default and is most
useful when the RTF file is being exported to be used in Word.
This retains the most information from the original LaTeX
file.
'-F'
use LaTeX to create bitmaps for all figures. This may help when
figures are not translated properly with the default settings.
This typically requires a functional version of ImageMagick on your
machine to work properly.
'-h'
a short usage description
'-i language'
used to set the idiom or language used by the LaTeX document.
Typically, this is specified in a LaTeX2e document by including
'\usepackage[language]{babel}' where 'language' is one of the
languages supported by the 'babel' package. All languages listed
in the babel system are supported so far as translations for
"Chapter," "References," and the like. Furthermore, some commands
found in the style files for german, french, russian, and czech
style are supported (*note Language Configuration::).
'-l'
same as '-i latin1' (Note that the default behavior is to use
'ansinew' which is a superset of 'latin1'). Included for backwards
compatibility.
'-M#'
where # selects the type of equation conversion. Use
'-M1'
convert displayed equations to RTF
'-M2'
convert inline equations to RTF
'-M4'
convert displayed equations to bitmap
'-M8'
convert inline equations to bitmap
'-M16'
insert Word comment field that contains the raw LaTeX equation
'-M32'
insert the raw latex equation in the RTF text delimited by '$
... $' for inline equations and by '\[ ... \]' for displayed
equations.
This is useful when using version 6 of the MathType equation
editor, which converts typed or pasted TeX code into a
MathType equation.
Probably this could also be useful for use in OpenOffice, as
OO has an equation syntax which partially resembles TeX
syntax.
'-M64'
convert displayed equations to EPS files and insert filenames
in RTF text.
'-M128'
convert inline equations to EPS files and insert filenames in
RTF text.
These switches can be combined to get different effects. Handy
examples are
'-M3'
convert both inline and displayed equations to RTF (default)
'-M6'
convert inline equations to RTF and displayed equations to
bitmaps
'-M12'
convert both inline and displayed equations to bitmaps
'-M192'
convert both inline and displayed equations to EPS and insert
filenames in RTF text
Conversion to bitmaps or eps requires that you have installed a
working latex2png script. Producing bitmaps is slow.
When running the DOS version, conversion to bitmaps works for the
first 26 equations but fails for the rest with the message
"latex2png: pipe error: Too many open files (EMFILE)".
This is probably a bug in the djgpp 2.04 compiler.
The Windows version, compiled with MinGW, successfully converts at
least 500 equations to bitmaps.
When -M64, -M128 or both are specified, equations are converted to
individual eps files, the filenames of which are literally inserted
in the rtf file, delimited by [###...###]. After loading the rtf
file in a text processing program, a macro can be run which
searches for "[###" and "###]", extracts the filename, and inserts
the eps in that place. The Windows installer package contains the
code of such a macro for Word2010 in the file
"WordMacro_InsertEPSfromNames.txt" in subfolder "scripts". (This
macro may also run on other versions of Word but it was only tested
on Word2010.) In Word, the inserted eps graphics display in bad
quality on the screen and on non-postscript printers but can be
printed in high quality on postscript and pdf printers.
'-o outputfile'
Unless an 'outputfile' is specified with the '-o' option, the
resulting RTF filename is formed by removing '.tex' from the
'inputfile' and appending '.rtf'.
'-p'
Escape parentheses in mathematical formulas. This has no effect
unless EQ fields are being generated. When this option is used,
then a '(' or ')' that appears in an EQ field will be preceeded by
a backslash. Despite documentation to the contrary (which says
that all parentheses should be escaped), adding escapes usually
produces a worse result than doing nothing. If Word displays some
formulas with parentheses as "Error!", you might try this option as
a last resort. See also the -S option.
This is an option because it will break typesetting equations with
non-matching parentheses (because an unmatched unquoted parenthesis
would terminate the field).
'-P /path/to/cfg'
used to specify the folder (i.e. directory) that contains the
'.cfg' files and/or the folder that contains the latex2png script.
Unix, Mac: The folder that contains the latex2png script must be
prepended by a ":".
DOS, Windows: The scripts folder is not used, the scripts are
always taken from the search path, therefore the folder containing
the scripts and the helper programs must be the first in the search
path. You can either add it to the search path permanently or add
it temporarily by calling l2rprep.bat before starting conversions.
If any of the folder names contains a blank, the folder string must
be enclosed in single (Unix, Mac) or double (DOS, Windows) quotes.
Examples:
(Unix:) 'latex2rtf -P ./cfg/:./scripts/ foo'
(DOS/Windows:) 'latex2rt -P "C:\Program Files\latex2rtf\cfg" foo'
Note that without specifying the -P option, LaTeX2RTF tries to find
its cfg files in the following locations:
1. the folder specified by the environment variable 'RTFPATH', if
this variable exists;
2. The folder '%PROGRAMFILES%\latex2rtf\cfg', if the variable
'PROGRAMFILES' exists - this is the folder in which LaTeX2RTF is
installed by the Windows GUI installer with default settings;
3. the folder specified at compilation time by the variable
'CFGDIR'. This is set in the Makefile. The DOS version is
compiled with 'CFGDIR=C:/l2r', the Windows version with
'CFGDIR=C:/PROGRA~1/latex2rtf'.
'-se#'
selects the scale for equation conversion, where # is the scale
factor (default 1.00).
'-sf#'
selects the scale for figure conversion, where # is the scale
factor (default 1.00).
'-t#'
where # selects the type of table conversion. Use
'-t1'
convert tables to RTF (default)
'-t2'
convert tables to bitmaps
'-v or -V'
prints version information on standard output and exits.
'-S'
used to specify that semicolons should be used to separate
arguments in RTF fields (instead of commas). Typically this is
needed when the machine that opens the RTF file has a version of
Windows that uses ',' for decimal points.
'-T /path/to/tmp'
used to specify the folder where to put temporary files. The path
can be absolute, e.g. '/path/to/tmp' or relative to the folder
where the .tex input file is in, e.g. 'tmp' or './tmp'.
If you call LaTeX2RTF from the commandline (e.g. under Linux or
when called as export filter by LyX), make sure that the tmp folder
exists. Only the LaTeX2RTF Windows shell tries to create the tmp
folder, the command line program doesn't.
'-W'
includes warnings directly in the RTF file
'-Z#'
add the specified number of extra '}' to the end of the RTF file.
This is useful for files that are not cleanly converted by
LaTeX2RTF.
With no arguments other than switches starting with a "-", LaTeX2RTF
acts as a filter, i.e., it reads from 'stdin' and writes to 'stdout'.
In addition, diagnostic messages are sent to 'stderr'. If these
standard channels are not redirected using '<' and '>', then the input
is read from the command line, and both output and error messages are
printed on the screen. To redirect warnings and error messages to a
file "latex2rtf.log", append '2>latex2rtf.log' to the command line.
If a non-switch argument is present, LaTeX2RTF assumes it is the name
of the input file. The file must have extension ".tex" but the
extension is optional. The output file is constructed from the input
file name by removing the extension ".tex" and adding ".rtf".
3.3 Debugging
=============
With the '-d' option you can specify how much processing information
LaTeX2RTF reports. If there is a logfile specified the output goes to
this file. Nonetheless Warnings and Errors are logged to stderr always.
They can be redirected to a file "latex2rtf.log" by appending
'2>latex2rtf.log' to the command line.
Possible values of '-d' are
0. only errors.
1. Translation Warnings (default).
2. shows preparsing of sections
3. Reasonably high level debugging messages
4. Show all function calls
5. Show each character as it is processed
6. Show processing of characters as they are output as well
4 Features
**********
In this chapter you find what styles is LaTeX2RTF supposed to translate
correctly to RTF.
4.1 LaTeX2e
===========
LaTeX2RTF understands most of the commands introduced with LaTeX2e. It
translates both the old 2.09 version of
'\documentstyle[options]{format#}' and the newer
'\documentclass[options]{format}'.
4.2 Unicode Support
===================
As of version 1.9.17 and up, LaTeX2RTF has limited unicode support.
LaTeX files that use unicode sequences are just emitted directly into
the RTF file.
Symbols and odd characters in math sequences may also be converted to a
unicode sequence. Some of them need the STIXGeneral fonts (see *note
Math and Special Symbols::) to be installed on the system where the rtf
file is to be displayed or printed.
Support for unicode encoded input is activated by the LaTeX command
'\usepackage[utf8]{inputenc}'
or
'\usepackage[utf8x]{inputenc}'.
4.3 Input Encoding
==================
It is not necesary to specify the '-C' option if you use
'\usepackage{isolatin1}' or '\documentstyle[isolatin1]{...}'. LaTeX2RTF
automagically detects these packages/style options and switches to
processing of ISO-Latin1 codes. The following encodings are supported:
ansinew, applemac, cp437, cp437de, cp850, cp852, cp865, decmulti,
cp1250, cp1252, latin1, latin2, latin3, latin4, latin5, latin9, next,
koi8-r, koi8-u, cp1251, cp855, cp866, maccyr, macukr, utf8, and utf8x.
The encoding used in RTF files is cp1252. If cyrillic fonts are
present, then these are represented in the RTF file using cp1251
(Windows Cyrillic).
4.4 Language Support
====================
The following languages from the Babel package are supported: afrikaans,
german, nynorsk, spanish, bahasa, dutch, icelandic, polish, swedish,
basque, english, portuges, turkish, brazil, esperanto, irish, romanian,
usorbian, breton, estonian, italian, samin, welsh, catalan, finnish,
latin, scottish, croatian, lsorbian, serbian, czech, french, magyar,
slovak, danish, galician, norsk, slovene.
The only thing that these files do is to translate various words
usually emitted by LaTeX during processing. For example, this ensures
that the LaTeX2RTF will provide the correct translation of the word
"Chapter" in the converted document.
You can select any of the above languages using the '-l' option.
This is not needed if your LaTeX file contains
'\usepackage[language]{babel}'.
Encountering the 'german' package or babel option (by H. Partl of the
Vienna University) makes LaTeX2RTF behave like that: German Quotes,
German Umlauts by '"a', etc... This support is programmed directly into
LaTeX2RTF and supporting similar features for other languages will
require patching the source code.
There is similar support for 'french' packages.
There is reasonable support for english, latin1, latin2, and cyrillic
languages.
*Note Language Configuration::, for details on how to write a
'language.cfg' file for your language by yourself.
4.5 Cross References
====================
Cross references include everything that you might expect and then some:
bibliographic citations, equation references, table references, figure
references, and section references. Section, equation, table and figure
references are implemented by placing RTF bookmarks around the equation
number (or table number or figure number).
Page references work but are implemented as "warm" cross-references.
This means that Word does not automatically update the page references
when the file is opened. To update the page references you must select
the entire document (in Word) and press 'F9'.
Bibliographic references currently require that a valid '.aux' file
be present. This is where LaTeX2RTF obtains the reference numbers. It
would be nice if LaTeX2RTF just automatically numbered the references
when there was no '.aux' file, but LaTeX2RTF does not do this yet.
LaTeX2RTF relies on BibTeX to convert and format bibliographic
entries. Usually the style file for a particular BibTeX format does not
use any special LaTeX commands and therefore the bibliography file
'file.bbl' can be processed by LaTeX2RTF without difficulty. As a
consequence, LaTeX2RTF can handle most bibliography styles without
problem.
There are several latex style packages that add additional latex
commands to enhance bibliographic formatting. LaTeX2RTF currently
supports the following bibliographic packages:
apacite, apalike, authordate, harvard, natbib (also with apanat1b).
These packages have many, many options and you may encounter problems
with formatting in special cases.
As of LaTeX2RTF 1.9.17 and up, the natbib command bibpunct is
supported.
Footnotes are implemented and appear at the bottom of each page.
Indexing is reasonably-well supported. The simple mark-up of
'makeindex'
\index{topic!subtopic@\textit{subtopic}}
is supported. The rest of the fancy indexing stuff is not
implemented. The index is created at the location of the '\printindex'
command. When a file with an index is first opened in Word, you must
select the entire file and update the page references and fields by
pressing 'F9'.
Currently, there is no support for '\labels' of '\item's in enumerate
environments.
The conversion of cross-references is not perfect because of the
different mechanisms in the LaTeX and Word worlds. In particular, if
there are multiple '\label' in a figure, table, or section environment
then only the first gets processed. It is also possible to confuse the
LaTeX2RTF in eqnarray environments.
4.6 Page Formatting
===================
LaTeX2RTF will handle some basic page formatting options, including
\doublespacing (as implemented in the setspace package), and the margin
setting options provided by the geometry package including commands in
the ratio, centering and margin families. Not all geometry options are
implemented yet, in part because there are no corresponding rtf commands
for many of them.
4.7 Equations
=============
There are six separate levels of equation translation based on the -M
switch, see *note LaTeX2RTF Options::. Each equation is converted
either to an EQ field or to a bitmap or inserted as raw TeX code in the
document or converted to an eps file with the eps file name inserted in
the document text delimited by [###...###].
This is an interim solution (for some definition of "interim").
Ideally the equations would become OLE equation objects in the RTF file,
but this needs to be implemented.
Some functions in the EQ fields have two or more parameters with a
separator between each two. Unfortunately, the interpretation of these
separators depends on the country specific settings in the MS Windows
system in which the rtf file is opened. e.g. in English versions of MS
Windows, the default parameter separator is the comma, in German
versions the default is the semicolon. If the parameter in the RTF file
does not match the Windows setting, some EQ fields are not interpreted
correctly. You can check and set the separator in [Windows control
panel - country settings - numbers - list separator]. By default,
LaTeX2RTF uses the comma as separator. If LaTeX2RTF is called with the
command line parameter -S , the semicolon is inserted as parameter
delimiter.
Theoretically, according to the Word help file, parentheses '(' or
')' in mathematical formulas should be escaped (by a preceding
backslash). Despite this, adding escapes usually produces a worse
result than doing nothing. If Word displays some formulas with
parentheses as "Error!", you might try the -p option as a last resort.
It is also possible to convert an EQ field generated by LaTeX2RTF to
an Equation Editor object by opening the rtf file in Word and
double-clicking on the equation. However there are bugs in the
interface between Word and Equation Editor which prevent symbols in font
Symbol or MTExtra to be converted correctly. The full commercial
version of the Equation Editor, called MathType, handles this conversion
correctly.
If you have MathType version 6 or later, an even better way to
convert LaTeX equations to MathType is letting LaTeX2RTF write the LaTeX
code of the equations verbatim in the rtf file (option -M32), then open
the rtf file in Word, select the LaTeX code of an equation, cut it to
the clipboard, open MathType, and paste the code. MathType will convert
the code into an equation. Wilfried tried to automate this in a Word
macro, but this fails because the macro does not wait until MathType is
started and ready to receive the pasted code. Maybe the MathType
authors will give us a hint or provide such a macro.
MathType can be downloaded from <http://www.dessci.com/> (30 day test
version).
4.8 Math and Special Symbols
============================
The way that symbols are converted in the RTF is based on the following
observations. If the symbol is found in the latin 1 character set, then
the current font is used, else the unicode code is inserted in the rtf
code. (Implemented since version 2.1.0)
The means that on the system where the '.rtf' file is opened, a
unicode font should be available or these glyphs will not be displayed
correctly. As only the STIX fonts contain all needed characters, these
fonts should be installed on the system where the rtf file is to be
displayed or printed.
Many mathematical and special symbols are directly supported by
LaTeX2RTF. Less common symbols (not found in the standard font) are
supported by the conversion table in the file 'direct.cfg', see *note
Direct Conversion::.
Required fonts are:
* "Times" / "Times New Roman" or "Helvetica" / "Arial", preferably
with Unicode extension (i.e. supporting all European languages
including Cyrillic, Greek, and Hebrew). "Times" or "Times New
Roman" and "Helvetica" or "Arial" are standard on all systems, but
not their Unicode extension.
* "STIXGeneral" (4 fonts in plain, italic, bold, bold-italic). These
fonts are available from
<http://sourceforge.net/projects/stixfonts/>.
Note that while Office 2003 on Vista works correctly with the Open
Type version, it does not on Windows XP (Word 2003 assigns no
character spacing, and Publisher doesn't display the character at
all). On Windows XP, Office 2003 only displays the symbols
correctly with the TrueType (ttf) version of the fonts. But
stixfonts.org only supplies the Open Type (otf) version. TrueType
versions of the fonts can be downloaded from
<http://sites.google.com/site/olegueret/stixfonts-ttf>.
4.9 Tables
==========
Conversion of tabular and tabbing environments is somewhat lame. The
main difficulty is that LaTeX (and html) will size the columns of a
table automatically. There is no such feature in RTF. Consequently, the
conversion defaults to making all the columns have equal size. This is
suboptimal and should be revised.
Another way is to use the option -t2 to make latex render them as
bitmaps and insert the bitmaps into the RTF file. This feature was
added in version 1.9.19.
4.10 Graphics
=============
There is now rudimentary support for '\includegraphics'. Three file
types will be inserted into the RTF file without needing conversion:
'.pict', '.jpeg', and '.png' files. EPS and PDF files are converted to
PNG using 'convert' from the ImageMagick package. Some options are even
handled properly.
4.11 Pagestyles
===============
If there is no '\pagestyle' command, the RTF output is generated as with
plain pagestyle, i.e. each page has its page number centered at the
bottom.
You must turn this off with the \pagestyle{empty} command in the
LaTeX file if you don't want pagenumbers. The headings and myheadings
styles are silently ignored by now. The twosided option to the
\documentstyle or \documentclass produces the corresponding RTF tokens.
Note that these features require RTF Version 1.4.
4.12 Hyperlatex
===============
Hyperlatex support is largely broken at the moment, but continues to
improve.
Otfried Schwarzkopf has created the "Hyperlatex Markup Language"
which is a "little package that allows you to use LaTeX to prepare
documents in HTML." It brings an Emacs lisp program with it to convert
the Hyperlatex file to HTML. Hyperlatex can be obtained from the
CTAN-sites, see *note Obtaining LaTeX2RTF::. There are two convenient
commands that avoid typing: \link and \xlink that generate an "internal"
label which then is used in the following \Ref and \Pageref commands.
LaTeX makes it possible to write '\link{anchor}[ltx]{label}', which
typesets: 'anchor ltx'. LaTeX2RTF does NOT support this aproach since
the optional parameter is thrown away right now, see *note LaTeX2RTF
under Development::.
Note that you have to update your '.cfg' files if you are upgrading,
since there are a lot of HTML oriented commands in Hyperlatex that we
simply can 'ignore'.
4.13 APA Support
================
Some APA citation styles are supported, see *note Citation Commands::
Support for APA text formatting is only rudimentary at the moment
(headings without numbering). If you want to format a document
according to APA, rename cfg/style.cfg to style_sav.cfg and rename
cfg/styleAPA.cfg to style.cfg before starting LaTeX2RTF.
5 Configuration
***************
5.1 Input processing
====================
On processing input LaTeX2RTF first converts the LaTeX special
characters. If it encounters one of the standard commands it is
converted internally. If a command is not known to LaTeX2RTF it is
first looked up in 'direct.cfg' and the RTF code specified there is
output. If not found there it is looked up in the section 'ignore.cfg'.
This file includes a lot of LaTeX commands that do not affect the output
(cross reference information and the like), or that we are not able or
willing to convert to RTF.
You can use 'ignore.cfg' if you get tired of seeing
WARNING: command: `foo' not found - ignored
and you don't need 'foo' in your RTF document. It would be nice to send
your additions to the LaTeX2RTF mailing list for inclusion in later
distributions.
LaTeX2RTF accepts Unix, MS-DOS, and Macintosh line ending codes (\n,
\r\n and \r). The files it creates get the line ending for the platform
on which LaTeX2RTF was compiled.
The LaTeX file may have been created with a wide variety of character
sets. If the LaTeX lacks the '\package[codepage]{inputenc}' definition,
then you may need to use the command line switch to manually select the
proper code page (*note Input Encoding::).
5.2 Conditional Parsing
=======================
Starting with LaTeX2RTF 1.9.18, there is a handy method for controlling
which content should be processed by LaTeX or by LaTeX2RTF. Control is
achieved using the standard '\if' facility of TeX. If you include the
following line in the preamble of your document (i.e., before
'\begin{document}')
\newif\iflatextortf
Then you will create a new '\iflatextortf' command in LaTeX. TeX sets
the value of this to 'false' by default. Now, LaTeX2RTF internally sets
'\iflatextortf' to be true, and to ensure that this is always the case,
LaTeX2RTF ignores the command '\latextortffalse'. This means that you
can control how different applications process your document by
\iflatextortf
This code is processed only by latex2rtf
\else
This code is processed only by latex
\fi
Note that '\iflatextortf' will only work within a section; you cannot
use this command to conditionally parse code that crosses section
boundaries. Also, it will only work on complete table or figure
environments. Due to the mechanism used by LaTeX2RTF in processing
these environments, at this time the only way to conditionally parse
tables and figures is to include two complete versions of the
environment in question, nested within an appropriate '\iflatex2rtf'
structure.
LaTeX2RTF versions 1.9.15 to 1.9.18 had the ability to hide contents
from LaTeX but expose them to LaTeX2RTF by starting a line with
'%latex2rtf:'. This code was horribly broken, and it was removed. The
same functionality is readily achieved using the '\iflatextortf'
mechanism. For example, the old method allowed
%latex2rtf: This line will only appear in the latex2rtf output,
To get the same behavior, define '\iflatextortf' and use
\iflatextortf
This code is processed only by latex2rtf
\fi
5.3 Output Formatting
=====================
On writing output, LaTeX2RTF generates the operating system specific
line ending code ('\n' on Unix, '\r\n' on DOS or Windows), depending on
which system LaTeX2RTF was compiled. As both should be legal to any RTF
Reader the resulting RTF rendering should not be affected.
LaTeX2RTF does not offer a whole lot of flexibility in how files are
translated, but it does offer some. This flexibility resides in four
files 'direct.cfg', 'ignore.cfg', 'fonts.cfg', and 'language.cfg'.
These filese are documented in the next four sections.
5.4 Direct Conversion
=====================
The file 'direct.cfg' is used for converting LaTeX commands by simple
text replacement. The format consists of lines with a LaTeX command
with backslash followed by comma. The rest of the line until a '.'
character will be written to the RTF file when the command is found in
the LaTeX file. Lines starting with a '#' character are ignored. After
the '.' everything is ignored to end of line. To select a specific font
use '*fontname*', where 'fontname' be defined in 'fonts.cfg'. To write
the '*' character use '**'.
\bigstar,{\u8727**}.
\copyright,\'a9.
In general, specific fonts should not be specified in this file.
There is a mechanism to do this, but it turns out that this is not as
useful as originally thought. The main reason that this fails is
because the conversion of equations from Word fields to Equation Editor
objects is buggy. The consequence is that to have symbols show up
properly, they must be encoded differently when the Symbol and MT Extra
fonts are used -- depending on whether Word fields are active or not.
It was all very tedious to figure out a mechanism that was "least
broken."
5.5 Ignore Command
==================
The file 'ignore.cfg' is used for defining how to ignore specific
commands. This file is used for recognition of LaTeX variables, user
defined variables, and some simple commands. All variables are ignored
but the converter must know the names to correctly ignore assignments to
variables. Lines in this file consist of a variable name with
backslash, followed by comma and the type of the variable followed by
'.'. Possible types are
'NUMBER'
simple numeric value
'MEASURE'
numeric value with following unit of measure
'OTHER'
ignores anything to the first character after '=' and from there to
next space. e.g., '\setbox\bak=\hbox'
'COMMAND'
ignores anything to next '\' and from there to the occurence of
anything but a letter e.g., '\newbox\bak'
'SINGLE'
ignores single command e.g., '\noindent'
'PARAMETER'
ignores a command with one parameter e.g., '\foo{bar}'
'PACKAGE'
does not produce a Warning message if PACKAGE is encountered, e.g.,
''\kleenex,PACKAGE.'' ignores ''\usepackage{kleenex}''
'ENVCMD'
intended to process contents of unknown environment as if it were
plain LaTeX, e.g. ''\environ,ENVCMD.''
Therefore ''\begin{environ} text \end{environ}'' would be converted
to 'text'. Doesn't work in LaTeX2RTF version 2.1.0 up to and
including 2.3.4.
'ENVIRONMENT'
ignores contents of that environment, e.g., with
''\ifhtml,ENVIRONMENT.'", ''\begin{ifhtml} text \end{ifhtml}''
ignores 'text'.
The types are in upper case exactly as above. Do not use spaces.
Lines starting with a '#' character are ignored. After the '.'
everything is ignored to end of line. Example:
\pagelength,MEASURE.
5.6 Font Configuration
======================
The file 'fonts.cfg' contains the font name mapping. For example, this
file determines what font is used to represent '\rm' characters in the
RTF file.
A line consists of a font name in LaTeX followed by comma and a font
name in RTF. The end is marked by a '.'. No spaces are allowed. The
LaTeX font will be converted to the RTF font when it is found in the
LaTeX file. If multiple translations for the same LaTeX font are
specified, only the first is used. All fonts in a LaTeX file that are
not in this file will be mapped to the default font. All RTF fonts
listed in this file will be in every RTF file header whether used or
not. Lines starting with a '#' character are ignored. After the '.'
everything is ignored to end of line.
To add a RTF font not used as substitute for a LaTeX font -- for
example a Symbol font used in 'direct.cfg' -- use a dummy LaTeX name
like in the following
Dummy3,MathematicalSymbols.
Make sure you use the correct font name. Take care of spaces in font
names. The default fonts are named Roman '\rm', Slanted '\sl', Sans
Serif '\sf', Typewriter '\tt', or Calligraphic '\cal'.
5.7 Language Configuration
==========================
The file(s) 'language.cfg' control the translation of LaTeX's
"hardcoded" sectioning names. The standard LaTeX styles have some fixed
Title names like 'Part', 'Reference' or 'Bibliography' that appeared in
English or German in the output with the original versions of LaTeX2RTF.
It is unlikely that you will need to create a new 'language.cfg'
file. However, just look at one of the existing files and follow the
pattern. The format is really simple.
6 Error Messages and Logging
****************************
As stated in the Debugging section, LaTeX2RTF provides a means to
control the amount of debugging information through the '-d#' switch.
By using a debugging level of 4, you can get a pretty good idea of what
LaTeX command caused the problem and what line that command might be
found on. Warnings and error messages are output to stderr and by
default listed in the console window. They can be redirected to a file
"latex2rtf.log" by appending '2>latex2rtf.log' to the command line.
'Fatal error messages'
indicate a bug in the source code. PLEASE report them, if they do
not apear in the documentation (*note Reporting Bugs::).
'Error messages'
always abort the program and are caused by conditions that prevent
further conversion of the input file. Typically this is cause by
LaTeX2RTF getting hopelessly confused by the number of braces in
the LaTeX file.
'Warning messages'
inform you, that there is some conversion loss from LaTeX to RTF,
or that the output file has some restrictions on some RTF Readers.
Most of these warnings can be supressed by add the offending
command to the 'ignore.cfg' file.
Error and Warning messages should follow the GNU Coding standards,
i.e. they have the format
inputfile':line: Error|Warning: message
You can also control the level of debugging output by inserting
'\verbositylevel{#}' in the LaTeX file. This is very handy if you have
a large LaTeX file that is failing in only a small section. For
example,
problem free latex file ....
\verbositylevel{5}
problematic code
\verbositylevel{0}
will cause a huge amount of debugging information to be emitted for the
problematic code.
Error reporting and logging still has many inconsistencies, but it
gets better with each release. Don't try to make any sense in debugging
levels above 4, these are for my own delight only and can change
significantly between versions.
The 'inputfile' may be incorrectly identified if it is incorporated
through '\input' or '\include'. The line may be also be wrong at times.
*Note Known Bugs::.
7 History & Copyright
*********************
In 1994 the first Version of LaTeX2RTF was written by Fernando Dorner
and Andreas Granzer of the Viena University supervised by Ralf
Schlatterbeck in a one-semester course. They created a simple LaTeX
parser and added most of the infrastructure for the program. This was
version 1.0 of LaTeX2RTF. In 1995, work on LaTeX2RTF was continued in
another one-semester course by Friedrich Polzer and Gerhard Trisko. The
result was LaTeX2RTF version 1.5. Ralf Schlatterbeck (ralf "at"
zoo.priv.at) maintained and extended LaTeX2RTF until 1998.
In 1998 Georg Lehner (jorge_lehner "at" gmx.net) found the reference
to LaTeX2RTF on the TeX Conversion Webpage
(http://tug.org/utilities/texconv/index.html) of Wilfried Hennings and
added some functionality and took over the maintainence of the program.
The last version release by Georg is 1.8aa. The bulk of development
post 1.8aa was done by Scott Prahl. Wilfried Hennings now coordinates
the development of the program and maintains the project on SourceForge
(http://sourceforge.net/projects/latex2rtf/) where there are also (low
volume) mailing lists for users and developers. Mailing via one of
these lists requires subscription to the list (to prevent spam). For
subscription to these lists visit the page: users list
(http://lists.sourceforge.net/lists/listinfo/latex2rtf-users) or
developers list
(http://lists.sourceforge.net/lists/listinfo/latex2rtf-developers)
As of Januar 2017, version 2.3.12 of LaTeX2RTF is available.
The contents of this manual were composed by copying shamelessly what
was available in the original sources and documentation.
8 LaTeX2RTF under Development
*****************************
8.1 Unimplemented Features
==========================
* LaTeX2RTF ignores some optional parameters of '\documentstyle'
* Add the code to produce the corresponding chapter, section, and
page numbering with headings and myheadings pagestyles. Implement
'\markboth' and '\markright'.
* To support '\tableofcontents' there would be two approaches:
Transfer sectioning information, title text and then produce page
numbers by the rtf- reader. Scan and label all of the sectioning
commands while reading and then construct the sectioning
information using these labels. Needs two passes on LaTeX input.
8.2 Missing options
===================
Missing or buggy command line options.
'-d'
Information logging and Error reporting is not implemented
consistently. Need to test and track problems with the linenumber
and with the file name.
'--long_names'
It would be useful to implement the GNU long option names, e.g.:
'-debug', '-output_file', '-quiet', etc. This could be done by
switching to the GNU getopt package.
8.3 Known Bugs
==============
1. The first parameter of a \link{anchor}[ltx]{label} is converted to
the rtf-output. Label is stored to hyperref for later use, the
optional parameter is ignored. [ltx] should be processed as
Otfried recommends it, to use for exclusive LaTeX output.e.g:
\link{readhere}[~\Ref]{explaining: chapter}. Since
{explaining:chapter} is yet read by LaTeX and hyperlatex when [...]
is evaluated it produces the correct reference. LaTeX2RTF is only
strolling from left to right through the text and can't remember
what she will see in the future.
2. The diagnostics routine does not output the correct (actual) input
filename. ('.aux', '.bbl', '\input').
8.4 Reporting Bugs
==================
Report bugs to to the bug tracking system at SourceForge
(http://sourceforge.net/projects/latex2rtf/). Only report bugs for the
latest version of LaTeX2RTF that is available. Please provide the
following information and observe the following guidelines when
reporting a bug in the program:
1. State the version of LaTeX2RTF that you are using. You can get the
version by specifying the '-V' option to LaTeX2RTF.
2. Specify the your operating system and version. Be sure to check
the file 'Makefile' for settings that may be specific to your
machine, especially for some versions of SunOS there may be
settings which are needed to compile successfully. Do this before
submitting a bug report.
3. If the program produces wrong output or does not work for you,
include a short LaTeX file along with a description of the problem.
Isolating the bug into a small LaTeX file does two things. First,
it provides a file that can be used to test future versions of
LaTeX2RTF and second, it certainly improves the chances that the
bug will get some attention. Do not send me large LaTeX or RTF
files, I simply do not have the time to wade through large files to
search for a bug!
4. Be patient. I am maintaining the program in my free time. I did
not write most of the code. Often I do not have the time to answer
to your question. I will, however, try to fix reported bugs in
upcoming releases.
8.5 Todo List
=============
Scott's ToDo list
* Use lex/yacc to implement getSection
* Add support for pagestyle
* Better support for ignoring commands
Georg's todo list
* Make this Manual more consistent, the ToDo and Known Bug List
shorter and the Features List longer.
* Harmonize all of the error and warning messages.
* Put warnings everywhere applicable about producing RTF 1.4 tokens.
* Provide an Error and Warning recovery guide to the user.
* Add a chapter with lists of all LaTeX commands that convert, and
that do not convert to RTF, including their status (for future
releases, never, partially functional, ...).
8.6 Command List
================
Listed here are all the LaTeX commands currently parsed by LaTeX2RTF.
Note: inclusion in this list does not mean that a command is fully and
correctly handled by LaTeX2RTF. In some cases the commands here are
place-holders only, and are not implemented at all. The list is
provided to encourage developers to note any departures from the
behaviour that LaTeX users will expect. The location of the commands is
noted to assist anyone interested in hacking on the C source code. This
list is a work in progress, and may not be immediately useful to general
users, other than to indicate those commands that we have at least
contemplated implementing.
8.6.1 General Commands
----------------------
These commands are found in the 'commands[]' array in commands.c. They
are arranged alphabetically within sections according to function.
8.6.1.1 Basic Commands
......................
All listed commands work as expected.
begin
centerline
end
endnote
footnote
raggedright
the
today
vcenter
8.6.1.2 Font Commands
.....................
All listed commands work as expected.
bf
bfseries
cal
em
emph
enotesize
footnotesize
HUGE
Huge
huge
it
itshape
LARGE
Large
large
mathbf
mathcal
mathit
mathmd
mathnormal
mathrm
mathsc
mathsf
mathsl
mathtt
mathup
mdseries
mit
normalfont
normalsize
rm
rmfamily
sc
scfamily
scriptsize
scshape
sf
sffamily
sl
slshape
small
ssmall
textbf
textfont
textit
textmd
textnormal
textrm
textsc
textsf
textsl
texttt
textup
tiny
tt
ttfamily
underbar
underline
upshape
8.6.1.3 Logos
.............
All listed commands work as expected.
AmSLaTeX
AmSTeX
BibTeX
kern
LaTeX
latex
LaTeXe
lower
LyX
SLiTeX
TeX
8.6.1.4 Special Characters
..........................
These commands all work as expected.
\
acute
b
bar
breve
c
check
d
ddot
dot
grave
H
hat
i
j
l
L
r
tilde
u
v
vec
8.6.1.5 Sectioning Commands
...........................
chapter
chapter*
paragraph
paragraph*
part
part*
section
section*
subparagraph
subparagraph*
subsection
subsection*
subsubsection
subsubsection*
8.6.1.6 Uncategorized
.....................
These commands need to be organized into new or existing sections.
abstract
addcontents
Ignored
addcontentsline
Ignored
addvspace
Ignored
aleph
Alph
alph
Ignored
alpha
Alpha
Ignored
amalg
and
angle
appendix
Ignored
approx
arabic
Ignored
ast
author
baselineskip
because
beta
Beta
bibentry
bibitem
bibliography
bibliographystyle
bibliographystyle
Ignored
bigskip
bot
BoxedEPSF
bullet
cap
caption
cdot
cdots
centering
char
chi
Chi
circ
cite
citeonline
cleardoublepage
clearpage
clubsuit
cong
contentsline
coprod
cup
date
ddots
delta
Delta
dfrac
Diamond
diamondsuit
div
doteq
dotfill
There is no rtf code for dotfill; LaTeX2RTF inserts an ellipsis
only.
dots
dots
downarrow
Downarrow
efloatseparator
ell
emptyset
endinput
endnotemark
Ignored
ensuremath
epsfbox
epsffile
epsilon
eqref
equiv
eta
exists
fbox
fbox
fnsymbol
Ignored
footnotemark
Ignored
forall
frac
Frac
framebox
Ignored
frenchspacing
Ignored
gamma
Gamma
ge
geq
gg
glossary
Ignored
glossaryentry
Ignored
hbar
hbox
heartsuit
hsize
hslash
hspace
Ignored
hspace*
Ignored
htmladdnormallink
htmlref
iiint
iint
Im
in
include
includegraphics
includegraphics*
includeonly
Ignored
indent
index
indexentry
Ignored
infty
input
int
int
iota
kappa
label
lambda
Lambda
land
langle
lceil
ldots
le
left
leftarrow
Leftarrow
leftharpoondown
leftleftarrows
leftrightarrow
Leftrightarrow
leftrightarrows
leq
let
Ignored
letterspace
lfloor
lim
liminf
limsup
linebreak
Ignored
lineskip
listoffigures
listoftables
ll
longleftarrow
longleftrightarrows
longrightarrow
lor
makebox
Ignored
maketitle
mapsto
marginpar
Ignored
markboth
Ignored
markright
Ignored
matrix
mbox
measuredangle
medskip
mho
moveleft
moveright
mp
mu
multicolumn
nabla
ne
nearrow
neg
neq
newblock
newcount
Ignored
newfont
Ignored
newpage
newsavebox
Ignored
nobibliography
Ignored
nobreakspace
nocite
noindent
nolinebreak
Ignored
nonfrenchspacing
Ignored
nonumber
nopagebreak
Ignored
notag
nu
numberline
nwarrow
omega
Omega
omicron
onecolumn
onlinecite
oplus
oslash
otimes
output
Ignored
overline
pagebreak
pagenumbering
Ignored
pageref
pagestyle
Ignored
par
parbox
partial
perp
phi
Phi
pi
Pi
pm
prec
printindex
prod
prod
propto
protect
Ignored
psfig
psfrag
Ignored
psi
Psi
qquad
quad
raisebox
Ignored
rangle
rceil
Re
ref
refstepcounter
rfloor
rho
right
Rightarrow
rightarrow
rightharpoonup
rightleftarrows
rightleftharpoons
rightrightarrows
Roman
Ignored
roman
Ignored
rule
samepage
Ignored
savebox
Ignored
sbox
Ignored
searrow
setbox
settowidth
Ignored
sigma
Sigma
sim
simeq
smallskip
spadesuit
sqrt
stackrel
stepcounter
Ignored
stretch
Ignored
subset
subseteq
succ
sum
sum
supset
supseteq
surd
swarrow
tableofcontents
tau
textalpha
textbeta
textbullet
textchi
textcolor
textDelta
textdelta
textellipsis
textepsilon
texteta
textGamma
textgamma
textiota
textkappa
textLambda
textlambda
textmu
textnu
textOmega
textomega
textperiodcentered
textPhi
textphi
textPi
textpi
textPsi
textpsi
textSigma
textsigma
textsubscript
textsuperscript
textTau
texttau
textTheta
texttheta
textXi
textxi
textzeta
thanks
therefore
Theta
theta
tikzpicture
times
title
to
triangleleft
triangleright
twocolumn
typeaout
Ignored
Typein
Ignored
typein
Ignored
typeout
Ignored
Uparrow
uparrow
updownarrow
Updownarrow
upsilon
Upsilon
url
usebox
Ignored
value
varepsilon
varnothing
varphi
varpi
varpropto
varsigma
vartheta
vbox
vdots
vee
verb
verb*
vref
vsize
vskip
vspace
vspace*
wedge
wp
xi
Xi
zeta
8.6.2 Preamble Commands
-----------------------
These commands are found in 'PreambleCommands[]' in commands.c, and are
implemented in preamble.c.
addtocounter
addtolength
baselineskip
celsius
cfoot
chead
cline
DeclareRobustCommand
DeclareRobustCommand*
def
degreecelsius
documentclass
documentstyle
doublespacing
Currently, the only command from the setspace package that is
implemented, and the only way to modify line spacing.
endnotetext
EUR
euro
evensidemargin
fancyfoot
fancyhead
flushbottom
footnotetext
geometry
Currently recognizes *ratio, *centering, *margin, left, right,
inner, outer, top, bottom, right, left (including vmargin, hratio
etc.)
headheight
headsep
hline
hoffset
htmladdnormallink
htmlref
hyphenation
iflatextortf
ifx
include
input
latextortffalse
Ignored
latextortftrue
Ignored
lfoot
lhead
listoffiles
Ignored
makeglossary
Ignored
makeindex
Ignored
makelabels
Ignored
markboth
Ignored
markright
Ignored
newcommand
newcounter
newenvironment
newif
newlength
newtheorem
nobreakspace
nofiles
Ignored
oddsidemargin
pagenumbering
Ignored
pagestyle
parindent
parskip
providecommand
raggedbottom
renewcommand
renewenvironment
renewtheorem
Ignored
resizebox
resizebox*
rfoot
rhead
setcounter
setlength
signature
textheight
textwidth
theendnotes
thepage
thispagestyle
Ignored
topmargin
usepackage
verbositylevel
voffset
8.6.3 Letter Commands
---------------------
Found in 'LetterCommands[]' in commands.c.
address
cc
closing
encl
opening
ps
signature
8.6.4 Language Commands
-----------------------
8.6.4.1 German Commands
.......................
Found in 'GermanModeCommands[]' in commands.c.
ck
glqq
glq
grq
grqq
8.6.4.2 Czech Commands
......................
uv
8.6.4.3 French Commands
.......................
deuxpoints
dittomark
FCS
fg
fup
ieme
iemes
ier
iere
ieres
iers
inferieura
LCS
lq
lqq
numero
Numero
numeros
Numeros
og
pointexclamation
pointinterrogation
pointvirgule
primo
quarto
rq
rqq
secundo
superieura
tertio
up
8.6.4.4 Russian Commands
........................
CYRA
cyra
CYRB
cyrb
CYRC
cyrc
CYRCH
cyrch
CYRCHSH
cyrchsh
CYRD
cyrd
CYRE
cyre
CYREREV
cyrerev
CYRERY
cyrery
CYRF
cyrf
CYRG
cyrg
CYRH
cyrh
CYRHRDSN
cyrhrdsn
CYRI
cyri
CYRISHRT
cyrishrt
CYRK
cyrk
CYRL
cyrl
CYRM
cyrm
CYRN
cyrn
CYRO
cyro
CYRP
cyrp
CYRR
cyrr
CYRS
cyrs
CYRSFTSN
cyrsftsn
CYRSH
cyrsh
CYRT
cyrt
CYRU
cyru
CYRV
cyrv
CYRYA
cyrya
CYRYU
cyryu
CYRZ
cyrz
CYRZH
cyrzh
8.6.5 Citation Commands
-----------------------
8.6.5.1 Apacite Commands
........................
AX
BAnd
BBA
BBAA
BBAB
BBAY
BBC
BBCP
BBCQ
BBN
BBOP
BBOQ
BCAY
BCBL
BCBT
BCHAIR
BCHAIRS
BCnt
BCntIP
BED
BEd
BEDS
Bem
BIP
BMTh
BNUM
BNUMS
BOthers
BOWP
BPG
BPGS
BPhD
BREPR
BTR
BTRANS
BTRANSS
BUMTh
BUPhD
BVOL
BVOLS
citeA
citeauthor
citeNP
citeyear
citeyearNP
fullcite
fullciteA
fullciteauthor
fullciteNP
shortcite
shortciteA
shortciteauthor
shortciteNP
8.6.5.2 AuthorDate Commands
...........................
citename
shortcite
8.6.5.3 Harvard Commands
........................
cite
citeaffixed
citeasnoun
citename
citeyear
citeyear*
harvardand
harvarditem
harvardyearleft
harvardyearright
possessivecite
8.6.5.4 HyperLatex Commands
...........................
Cite
link
Pageref
Ref
S
xlink
8.6.5.5 Apacite Commands
........................
bibpunct
cite
citealp
Citealp
citealp*
citealt
Citealt
citealt*
citeauthor
Citeauthor
citeauthor*
citep
Citep
citep*
citet
Citet
citet*
citetext
citeyear
citeyearpar
8.6.6 Acronym Commands
----------------------
usepackage [options] {acronym}
ac
acfi
acro
acrodef
acrodefplural
acused
8.6.7 Other Commands
--------------------
Other Commands:
item
caption
center
8.6.8 Environments
------------------
Environments processed - found in 'params[]' in commands.c.
abstract
acknowledgments
align
align*
alltt
array
bf
bfseries
center
comment
compactenum
compactitem
description
displaymath
document
em
enumerate
eqnarray
eqnarray*
equation
equation*
figure
figure*
flushleft
flushright
htmlonly
Ignored
it
itemize
itshape
landscape
latexonly
Ignored
letter
list
longtable
longtable*
math
mdseries
minipage
multicolumn
music
picture
quotation
quote
rawhtml
Ignored
rm
rmfamily
sc
scshape
sf
sffamily
sl
sloppypar
slshape
small
tabbing
table
table*
tabular
tabular*
thebibliography
theindex
Ignored
titlepage
tt
ttfamily
verbatim
Verbatim
verse
9 Function Index
****************
* Menu:
* \: Special Characters. (line 1534)
* abstract: Uncategorized. (line 1580)
* abstract <1>: Environments. (line 2798)
* ac: Acronym Commands. (line 2778)
* acfi: Acronym Commands. (line 2779)
* acknowledgments: Environments. (line 2800)
* acro: Acronym Commands. (line 2780)
* acrodef: Acronym Commands. (line 2781)
* acrodefplural: Acronym Commands. (line 2782)
* acused: Acronym Commands. (line 2783)
* acute: Special Characters. (line 1535)
* addcontents: Uncategorized. (line 1582)
* addcontentsline: Uncategorized. (line 1585)
* address: Letter Commands. (line 2519)
* addtocounter: Preamble Commands. (line 2341)
* addtolength: Preamble Commands. (line 2343)
* addvspace: Uncategorized. (line 1588)
* aleph: Uncategorized. (line 1591)
* align: Environments. (line 2802)
* align*: Environments. (line 2804)
* alltt: Environments. (line 2806)
* Alph: Uncategorized. (line 1593)
* alph: Uncategorized. (line 1595)
* alpha: Uncategorized. (line 1598)
* Alpha: Uncategorized. (line 1600)
* amalg: Uncategorized. (line 1603)
* AmSLaTeX: Logos. (line 1517)
* AmSTeX: Logos. (line 1518)
* and: Uncategorized. (line 1605)
* angle: Uncategorized. (line 1607)
* appendix: Uncategorized. (line 1609)
* approx: Uncategorized. (line 1612)
* arabic: Uncategorized. (line 1614)
* array: Environments. (line 2808)
* ast: Uncategorized. (line 1617)
* author: Uncategorized. (line 1619)
* AX: Apacite Commands. (line 2665)
* b: Special Characters. (line 1536)
* BAnd: Apacite Commands. (line 2666)
* bar: Special Characters. (line 1537)
* baselineskip: Uncategorized. (line 1621)
* baselineskip <1>: Preamble Commands. (line 2345)
* BBA: Apacite Commands. (line 2667)
* BBAA: Apacite Commands. (line 2668)
* BBAB: Apacite Commands. (line 2669)
* BBAY: Apacite Commands. (line 2670)
* BBC: Apacite Commands. (line 2671)
* BBCP: Apacite Commands. (line 2672)
* BBCQ: Apacite Commands. (line 2673)
* BBN: Apacite Commands. (line 2674)
* BBOP: Apacite Commands. (line 2675)
* BBOQ: Apacite Commands. (line 2676)
* BCAY: Apacite Commands. (line 2677)
* BCBL: Apacite Commands. (line 2678)
* BCBT: Apacite Commands. (line 2679)
* BCHAIR: Apacite Commands. (line 2680)
* BCHAIRS: Apacite Commands. (line 2681)
* BCnt: Apacite Commands. (line 2682)
* BCntIP: Apacite Commands. (line 2683)
* because: Uncategorized. (line 1623)
* BED: Apacite Commands. (line 2684)
* BEd: Apacite Commands. (line 2685)
* BEDS: Apacite Commands. (line 2686)
* begin: Basic Commands. (line 1437)
* Bem: Apacite Commands. (line 2687)
* beta: Uncategorized. (line 1625)
* Beta: Uncategorized. (line 1627)
* bf: Font Commands. (line 1452)
* bf <1>: Environments. (line 2810)
* bfseries: Font Commands. (line 1453)
* bfseries <1>: Environments. (line 2812)
* bibentry: Uncategorized. (line 1629)
* bibitem: Uncategorized. (line 1631)
* bibliography: Uncategorized. (line 1633)
* bibliographystyle: Uncategorized. (line 1635)
* bibliographystyle <1>: Uncategorized. (line 1637)
* bibpunct: Natbib Commands. (line 2753)
* BibTeX: Logos. (line 1519)
* bigskip: Uncategorized. (line 1640)
* BIP: Apacite Commands. (line 2688)
* BMTh: Apacite Commands. (line 2689)
* BNUM: Apacite Commands. (line 2690)
* BNUMS: Apacite Commands. (line 2691)
* bot: Uncategorized. (line 1642)
* BOthers: Apacite Commands. (line 2692)
* BOWP: Apacite Commands. (line 2693)
* BoxedEPSF: Uncategorized. (line 1644)
* BPG: Apacite Commands. (line 2694)
* BPGS: Apacite Commands. (line 2695)
* BPhD: Apacite Commands. (line 2696)
* BREPR: Apacite Commands. (line 2697)
* breve: Special Characters. (line 1538)
* BTR: Apacite Commands. (line 2698)
* BTRANS: Apacite Commands. (line 2699)
* BTRANSS: Apacite Commands. (line 2700)
* bullet: Uncategorized. (line 1646)
* BUMTh: Apacite Commands. (line 2701)
* BUPhD: Apacite Commands. (line 2702)
* BVOL: Apacite Commands. (line 2703)
* BVOLS: Apacite Commands. (line 2704)
* c: Special Characters. (line 1539)
* cal: Font Commands. (line 1454)
* cap: Uncategorized. (line 1648)
* caption: Uncategorized. (line 1650)
* cc: Letter Commands. (line 2521)
* cdot: Uncategorized. (line 1652)
* cdots: Uncategorized. (line 1654)
* celsius: Preamble Commands. (line 2347)
* center: Environments. (line 2814)
* centering: Uncategorized. (line 1656)
* centerline: Basic Commands. (line 1438)
* cfoot: Preamble Commands. (line 2349)
* chapter: Sectioning Commands.
(line 1560)
* chapter*: Sectioning Commands.
(line 1561)
* char: Uncategorized. (line 1658)
* chead: Preamble Commands. (line 2351)
* check: Special Characters. (line 1540)
* chi: Uncategorized. (line 1660)
* Chi: Uncategorized. (line 1662)
* circ: Uncategorized. (line 1664)
* cite: Uncategorized. (line 1666)
* cite <1>: Harvard Commands. (line 2728)
* Cite: HyperLatex Commands.
(line 2743)
* cite <2>: Natbib Commands. (line 2754)
* citeA: Apacite Commands. (line 2705)
* citeaffixed: Harvard Commands. (line 2729)
* citealp: Natbib Commands. (line 2755)
* Citealp: Natbib Commands. (line 2756)
* citealp*: Natbib Commands. (line 2757)
* citealt: Natbib Commands. (line 2758)
* Citealt: Natbib Commands. (line 2759)
* citealt*: Natbib Commands. (line 2760)
* citeasnoun: Harvard Commands. (line 2730)
* citeauthor: Apacite Commands. (line 2706)
* citeauthor <1>: Natbib Commands. (line 2761)
* Citeauthor: Natbib Commands. (line 2762)
* citeauthor*: Natbib Commands. (line 2763)
* citename: AuthorDate Commands.
(line 2722)
* citename <1>: Harvard Commands. (line 2731)
* citeNP: Apacite Commands. (line 2707)
* citeonline: Uncategorized. (line 1668)
* citep: Natbib Commands. (line 2764)
* Citep: Natbib Commands. (line 2765)
* citep*: Natbib Commands. (line 2766)
* citet: Natbib Commands. (line 2767)
* Citet: Natbib Commands. (line 2768)
* citet*: Natbib Commands. (line 2769)
* citetext: Natbib Commands. (line 2770)
* citeyear: Apacite Commands. (line 2708)
* citeyear <1>: Harvard Commands. (line 2732)
* citeyear <2>: Natbib Commands. (line 2771)
* citeyear*: Harvard Commands. (line 2733)
* citeyearNP: Apacite Commands. (line 2709)
* citeyearpar: Natbib Commands. (line 2772)
* ck: German Commands. (line 2541)
* cleardoublepage: Uncategorized. (line 1670)
* clearpage: Uncategorized. (line 1672)
* cline: Preamble Commands. (line 2353)
* closing: Letter Commands. (line 2523)
* clubsuit: Uncategorized. (line 1674)
* comment: Environments. (line 2816)
* compactenum: Environments. (line 2818)
* compactitem: Environments. (line 2820)
* cong: Uncategorized. (line 1676)
* contentsline: Uncategorized. (line 1678)
* coprod: Uncategorized. (line 1680)
* cup: Uncategorized. (line 1682)
* CYRA: Russian Commands. (line 2594)
* cyra: Russian Commands. (line 2595)
* CYRB: Russian Commands. (line 2596)
* cyrb: Russian Commands. (line 2597)
* CYRC: Russian Commands. (line 2598)
* cyrc: Russian Commands. (line 2599)
* CYRCH: Russian Commands. (line 2600)
* cyrch: Russian Commands. (line 2601)
* CYRCHSH: Russian Commands. (line 2602)
* cyrchsh: Russian Commands. (line 2603)
* CYRD: Russian Commands. (line 2604)
* cyrd: Russian Commands. (line 2605)
* CYRE: Russian Commands. (line 2606)
* cyre: Russian Commands. (line 2607)
* CYREREV: Russian Commands. (line 2608)
* cyrerev: Russian Commands. (line 2609)
* CYRERY: Russian Commands. (line 2610)
* cyrery: Russian Commands. (line 2611)
* CYRF: Russian Commands. (line 2612)
* cyrf: Russian Commands. (line 2613)
* CYRG: Russian Commands. (line 2614)
* cyrg: Russian Commands. (line 2615)
* CYRH: Russian Commands. (line 2616)
* cyrh: Russian Commands. (line 2617)
* CYRHRDSN: Russian Commands. (line 2618)
* cyrhrdsn: Russian Commands. (line 2619)
* CYRI: Russian Commands. (line 2620)
* cyri: Russian Commands. (line 2621)
* CYRISHRT: Russian Commands. (line 2622)
* cyrishrt: Russian Commands. (line 2623)
* CYRK: Russian Commands. (line 2624)
* cyrk: Russian Commands. (line 2625)
* CYRL: Russian Commands. (line 2626)
* cyrl: Russian Commands. (line 2627)
* CYRM: Russian Commands. (line 2628)
* cyrm: Russian Commands. (line 2629)
* CYRN: Russian Commands. (line 2630)
* cyrn: Russian Commands. (line 2631)
* CYRO: Russian Commands. (line 2632)
* cyro: Russian Commands. (line 2633)
* CYRP: Russian Commands. (line 2634)
* cyrp: Russian Commands. (line 2635)
* CYRR: Russian Commands. (line 2636)
* cyrr: Russian Commands. (line 2637)
* CYRS: Russian Commands. (line 2638)
* cyrs: Russian Commands. (line 2639)
* CYRSFTSN: Russian Commands. (line 2640)
* cyrsftsn: Russian Commands. (line 2641)
* CYRSH: Russian Commands. (line 2642)
* cyrsh: Russian Commands. (line 2643)
* CYRT: Russian Commands. (line 2644)
* cyrt: Russian Commands. (line 2645)
* CYRU: Russian Commands. (line 2646)
* cyru: Russian Commands. (line 2647)
* CYRV: Russian Commands. (line 2648)
* cyrv: Russian Commands. (line 2649)
* CYRYA: Russian Commands. (line 2650)
* cyrya: Russian Commands. (line 2651)
* CYRYU: Russian Commands. (line 2652)
* cyryu: Russian Commands. (line 2653)
* CYRZ: Russian Commands. (line 2654)
* cyrz: Russian Commands. (line 2655)
* CYRZH: Russian Commands. (line 2656)
* cyrzh: Russian Commands. (line 2657)
* d: Special Characters. (line 1541)
* date: Uncategorized. (line 1684)
* ddot: Special Characters. (line 1542)
* ddots: Uncategorized. (line 1686)
* DeclareRobustCommand: Preamble Commands. (line 2355)
* DeclareRobustCommand*: Preamble Commands. (line 2357)
* def: Preamble Commands. (line 2359)
* degreecelsius: Preamble Commands. (line 2361)
* delta: Uncategorized. (line 1688)
* Delta: Uncategorized. (line 1690)
* description: Environments. (line 2822)
* deuxpoints: French Commands. (line 2559)
* dfrac: Uncategorized. (line 1692)
* Diamond: Uncategorized. (line 1694)
* diamondsuit: Uncategorized. (line 1696)
* displaymath: Environments. (line 2824)
* dittomark: French Commands. (line 2560)
* div: Uncategorized. (line 1698)
* document: Environments. (line 2826)
* documentclass: Preamble Commands. (line 2363)
* documentstyle: Preamble Commands. (line 2365)
* dot: Special Characters. (line 1543)
* doteq: Uncategorized. (line 1700)
* dotfill: Uncategorized. (line 1702)
* dots: Uncategorized. (line 1706)
* dots <1>: Uncategorized. (line 1708)
* doublespacing: Preamble Commands. (line 2367)
* downarrow: Uncategorized. (line 1710)
* Downarrow: Uncategorized. (line 1712)
* efloatseparator: Uncategorized. (line 1714)
* ell: Uncategorized. (line 1716)
* em: Font Commands. (line 1455)
* em <1>: Environments. (line 2828)
* emph: Font Commands. (line 1456)
* emptyset: Uncategorized. (line 1718)
* encl: Letter Commands. (line 2525)
* end: Basic Commands. (line 1439)
* endinput: Uncategorized. (line 1720)
* endnote: Basic Commands. (line 1440)
* endnotemark: Uncategorized. (line 1722)
* endnotetext: Preamble Commands. (line 2371)
* enotesize: Font Commands. (line 1457)
* ensuremath: Uncategorized. (line 1725)
* enumerate: Environments. (line 2830)
* epsfbox: Uncategorized. (line 1727)
* epsffile: Uncategorized. (line 1729)
* epsilon: Uncategorized. (line 1731)
* eqnarray: Environments. (line 2832)
* eqnarray*: Environments. (line 2834)
* eqref: Uncategorized. (line 1733)
* equation: Environments. (line 2836)
* equation*: Environments. (line 2838)
* equiv: Uncategorized. (line 1735)
* eta: Uncategorized. (line 1737)
* EUR: Preamble Commands. (line 2373)
* euro: Preamble Commands. (line 2375)
* evensidemargin: Preamble Commands. (line 2377)
* exists: Uncategorized. (line 1739)
* fancyfoot: Preamble Commands. (line 2379)
* fancyhead: Preamble Commands. (line 2381)
* fbox: Uncategorized. (line 1741)
* fbox <1>: Uncategorized. (line 1743)
* FCS: French Commands. (line 2561)
* fg: French Commands. (line 2562)
* figure: Environments. (line 2840)
* figure*: Environments. (line 2842)
* flushbottom: Preamble Commands. (line 2383)
* flushleft: Environments. (line 2844)
* flushright: Environments. (line 2846)
* fnsymbol: Uncategorized. (line 1745)
* footnote: Basic Commands. (line 1441)
* footnotemark: Uncategorized. (line 1748)
* footnotesize: Font Commands. (line 1458)
* footnotetext: Preamble Commands. (line 2385)
* forall: Uncategorized. (line 1751)
* frac: Uncategorized. (line 1753)
* Frac: Uncategorized. (line 1755)
* framebox: Uncategorized. (line 1757)
* frenchspacing: Uncategorized. (line 1760)
* fullcite: Apacite Commands. (line 2710)
* fullciteA: Apacite Commands. (line 2711)
* fullciteauthor: Apacite Commands. (line 2712)
* fullciteNP: Apacite Commands. (line 2713)
* fup: French Commands. (line 2563)
* gamma: Uncategorized. (line 1763)
* Gamma: Uncategorized. (line 1765)
* ge: Uncategorized. (line 1767)
* geometry: Preamble Commands. (line 2387)
* geq: Uncategorized. (line 1769)
* gg: Uncategorized. (line 1771)
* glossary: Uncategorized. (line 1773)
* glossaryentry: Uncategorized. (line 1776)
* glq: German Commands. (line 2545)
* glqq: German Commands. (line 2543)
* grave: Special Characters. (line 1544)
* grq: German Commands. (line 2547)
* grqq: German Commands. (line 2549)
* H: Special Characters. (line 1545)
* harvardand: Harvard Commands. (line 2734)
* harvarditem: Harvard Commands. (line 2735)
* harvardyearleft: Harvard Commands. (line 2736)
* harvardyearright: Harvard Commands. (line 2737)
* hat: Special Characters. (line 1546)
* hbar: Uncategorized. (line 1779)
* hbox: Uncategorized. (line 1781)
* headheight: Preamble Commands. (line 2392)
* headsep: Preamble Commands. (line 2394)
* heartsuit: Uncategorized. (line 1783)
* hline: Preamble Commands. (line 2396)
* hoffset: Preamble Commands. (line 2398)
* hsize: Uncategorized. (line 1785)
* hslash: Uncategorized. (line 1787)
* hspace: Uncategorized. (line 1789)
* hspace*: Uncategorized. (line 1792)
* htmladdnormallink: Uncategorized. (line 1795)
* htmladdnormallink <1>: Preamble Commands. (line 2400)
* htmlonly: Environments. (line 2848)
* htmlref: Uncategorized. (line 1797)
* htmlref <1>: Preamble Commands. (line 2402)
* HUGE: Font Commands. (line 1459)
* Huge: Font Commands. (line 1460)
* huge: Font Commands. (line 1461)
* hyphenation: Preamble Commands. (line 2404)
* i: Special Characters. (line 1547)
* ieme: French Commands. (line 2564)
* iemes: French Commands. (line 2565)
* ier: French Commands. (line 2566)
* iere: French Commands. (line 2567)
* ieres: French Commands. (line 2568)
* iers: French Commands. (line 2569)
* iflatextortf: Preamble Commands. (line 2406)
* ifx: Preamble Commands. (line 2408)
* iiint: Uncategorized. (line 1799)
* iint: Uncategorized. (line 1801)
* Im: Uncategorized. (line 1803)
* in: Uncategorized. (line 1805)
* include: Uncategorized. (line 1807)
* include <1>: Preamble Commands. (line 2410)
* includegraphics: Uncategorized. (line 1809)
* includegraphics*: Uncategorized. (line 1811)
* includeonly: Uncategorized. (line 1813)
* indent: Uncategorized. (line 1816)
* index: Uncategorized. (line 1818)
* indexentry: Uncategorized. (line 1820)
* inferieura: French Commands. (line 2570)
* infty: Uncategorized. (line 1823)
* input: Uncategorized. (line 1825)
* input <1>: Preamble Commands. (line 2412)
* int: Uncategorized. (line 1827)
* int <1>: Uncategorized. (line 1829)
* iota: Uncategorized. (line 1831)
* it: Font Commands. (line 1462)
* it <1>: Environments. (line 2851)
* itemize: Environments. (line 2853)
* itshape: Font Commands. (line 1463)
* itshape <1>: Environments. (line 2855)
* j: Special Characters. (line 1548)
* kappa: Uncategorized. (line 1833)
* kern: Logos. (line 1520)
* l: Special Characters. (line 1549)
* L: Special Characters. (line 1550)
* label: Uncategorized. (line 1835)
* lambda: Uncategorized. (line 1837)
* Lambda: Uncategorized. (line 1839)
* land: Uncategorized. (line 1841)
* landscape: Environments. (line 2857)
* langle: Uncategorized. (line 1843)
* LARGE: Font Commands. (line 1464)
* Large: Font Commands. (line 1465)
* large: Font Commands. (line 1466)
* LaTeX: Logos. (line 1521)
* latex: Logos. (line 1522)
* LaTeXe: Logos. (line 1523)
* latexonly: Environments. (line 2859)
* latextortffalse: Preamble Commands. (line 2414)
* latextortftrue: Preamble Commands. (line 2417)
* lceil: Uncategorized. (line 1845)
* LCS: French Commands. (line 2571)
* ldots: Uncategorized. (line 1847)
* le: Uncategorized. (line 1849)
* left: Uncategorized. (line 1851)
* leftarrow: Uncategorized. (line 1853)
* Leftarrow: Uncategorized. (line 1855)
* leftharpoondown: Uncategorized. (line 1857)
* leftleftarrows: Uncategorized. (line 1859)
* leftrightarrow: Uncategorized. (line 1861)
* Leftrightarrow: Uncategorized. (line 1863)
* leftrightarrows: Uncategorized. (line 1865)
* leq: Uncategorized. (line 1867)
* let: Uncategorized. (line 1869)
* letter: Environments. (line 2862)
* letterspace: Uncategorized. (line 1872)
* lfloor: Uncategorized. (line 1874)
* lfoot: Preamble Commands. (line 2420)
* lhead: Preamble Commands. (line 2422)
* lim: Uncategorized. (line 1876)
* liminf: Uncategorized. (line 1878)
* limsup: Uncategorized. (line 1880)
* linebreak: Uncategorized. (line 1882)
* lineskip: Uncategorized. (line 1885)
* link: HyperLatex Commands.
(line 2744)
* list: Environments. (line 2864)
* listoffigures: Uncategorized. (line 1887)
* listoffiles: Preamble Commands. (line 2424)
* listoftables: Uncategorized. (line 1889)
* ll: Uncategorized. (line 1891)
* longleftarrow: Uncategorized. (line 1893)
* longleftrightarrows: Uncategorized. (line 1895)
* longrightarrow: Uncategorized. (line 1897)
* longtable: Environments. (line 2866)
* longtable*: Environments. (line 2868)
* lor: Uncategorized. (line 1899)
* lower: Logos. (line 1524)
* lq: French Commands. (line 2572)
* lqq: French Commands. (line 2573)
* LyX: Logos. (line 1525)
* makebox: Uncategorized. (line 1901)
* makeglossary: Preamble Commands. (line 2427)
* makeindex: Preamble Commands. (line 2430)
* makelabels: Preamble Commands. (line 2433)
* maketitle: Uncategorized. (line 1904)
* mapsto: Uncategorized. (line 1906)
* marginpar: Uncategorized. (line 1908)
* markboth: Uncategorized. (line 1911)
* markboth <1>: Preamble Commands. (line 2436)
* markright: Uncategorized. (line 1914)
* markright <1>: Preamble Commands. (line 2439)
* math: Environments. (line 2870)
* mathbf: Font Commands. (line 1467)
* mathcal: Font Commands. (line 1468)
* mathit: Font Commands. (line 1469)
* mathmd: Font Commands. (line 1470)
* mathnormal: Font Commands. (line 1471)
* mathrm: Font Commands. (line 1472)
* mathsc: Font Commands. (line 1473)
* mathsf: Font Commands. (line 1474)
* mathsl: Font Commands. (line 1475)
* mathtt: Font Commands. (line 1476)
* mathup: Font Commands. (line 1477)
* matrix: Uncategorized. (line 1917)
* mbox: Uncategorized. (line 1919)
* mdseries: Font Commands. (line 1478)
* mdseries <1>: Environments. (line 2872)
* measuredangle: Uncategorized. (line 1921)
* medskip: Uncategorized. (line 1923)
* mho: Uncategorized. (line 1925)
* minipage: Environments. (line 2874)
* mit: Font Commands. (line 1479)
* moveleft: Uncategorized. (line 1927)
* moveright: Uncategorized. (line 1929)
* mp: Uncategorized. (line 1931)
* mu: Uncategorized. (line 1933)
* multicolumn: Uncategorized. (line 1935)
* multicolumn <1>: Environments. (line 2876)
* music: Environments. (line 2878)
* nabla: Uncategorized. (line 1937)
* ne: Uncategorized. (line 1939)
* nearrow: Uncategorized. (line 1941)
* neg: Uncategorized. (line 1943)
* neq: Uncategorized. (line 1945)
* newblock: Uncategorized. (line 1947)
* newcommand: Preamble Commands. (line 2442)
* newcount: Uncategorized. (line 1949)
* newcounter: Preamble Commands. (line 2444)
* newenvironment: Preamble Commands. (line 2446)
* newfont: Uncategorized. (line 1952)
* newif: Preamble Commands. (line 2448)
* newlength: Preamble Commands. (line 2450)
* newpage: Uncategorized. (line 1955)
* newsavebox: Uncategorized. (line 1957)
* newtheorem: Preamble Commands. (line 2452)
* nobibliography: Uncategorized. (line 1960)
* nobreakspace: Uncategorized. (line 1963)
* nobreakspace <1>: Preamble Commands. (line 2454)
* nocite: Uncategorized. (line 1965)
* nofiles: Preamble Commands. (line 2456)
* noindent: Uncategorized. (line 1967)
* nolinebreak: Uncategorized. (line 1969)
* nonfrenchspacing: Uncategorized. (line 1972)
* nonumber: Uncategorized. (line 1975)
* nopagebreak: Uncategorized. (line 1977)
* normalfont: Font Commands. (line 1480)
* normalsize: Font Commands. (line 1481)
* notag: Uncategorized. (line 1980)
* nu: Uncategorized. (line 1982)
* numberline: Uncategorized. (line 1984)
* numero: French Commands. (line 2574)
* Numero: French Commands. (line 2575)
* numeros: French Commands. (line 2576)
* Numeros: French Commands. (line 2577)
* nwarrow: Uncategorized. (line 1986)
* oddsidemargin: Preamble Commands. (line 2459)
* og: French Commands. (line 2578)
* omega: Uncategorized. (line 1988)
* Omega: Uncategorized. (line 1990)
* omicron: Uncategorized. (line 1992)
* onecolumn: Uncategorized. (line 1994)
* onlinecite: Uncategorized. (line 1996)
* opening: Letter Commands. (line 2527)
* oplus: Uncategorized. (line 1998)
* oslash: Uncategorized. (line 2000)
* otimes: Uncategorized. (line 2002)
* output: Uncategorized. (line 2004)
* overline: Uncategorized. (line 2007)
* pagebreak: Uncategorized. (line 2009)
* pagenumbering: Uncategorized. (line 2011)
* pagenumbering <1>: Preamble Commands. (line 2461)
* pageref: Uncategorized. (line 2014)
* Pageref: HyperLatex Commands.
(line 2745)
* pagestyle: Uncategorized. (line 2016)
* pagestyle <1>: Preamble Commands. (line 2464)
* par: Uncategorized. (line 2019)
* paragraph: Sectioning Commands.
(line 1562)
* paragraph*: Sectioning Commands.
(line 1563)
* parbox: Uncategorized. (line 2021)
* parindent: Preamble Commands. (line 2466)
* parskip: Preamble Commands. (line 2468)
* part: Sectioning Commands.
(line 1564)
* part*: Sectioning Commands.
(line 1565)
* partial: Uncategorized. (line 2023)
* perp: Uncategorized. (line 2025)
* phi: Uncategorized. (line 2027)
* Phi: Uncategorized. (line 2029)
* pi: Uncategorized. (line 2031)
* Pi: Uncategorized. (line 2033)
* picture: Environments. (line 2880)
* pm: Uncategorized. (line 2035)
* pointexclamation: French Commands. (line 2579)
* pointinterrogation: French Commands. (line 2580)
* pointvirgule: French Commands. (line 2581)
* possessivecite: Harvard Commands. (line 2738)
* prec: Uncategorized. (line 2037)
* primo: French Commands. (line 2582)
* printindex: Uncategorized. (line 2039)
* prod: Uncategorized. (line 2041)
* prod <1>: Uncategorized. (line 2043)
* propto: Uncategorized. (line 2045)
* protect: Uncategorized. (line 2047)
* providecommand: Preamble Commands. (line 2470)
* ps: Letter Commands. (line 2529)
* psfig: Uncategorized. (line 2050)
* psfrag: Uncategorized. (line 2052)
* psi: Uncategorized. (line 2055)
* Psi: Uncategorized. (line 2057)
* qquad: Uncategorized. (line 2059)
* quad: Uncategorized. (line 2061)
* quarto: French Commands. (line 2583)
* quotation: Environments. (line 2882)
* quote: Environments. (line 2884)
* r: Special Characters. (line 1551)
* raggedbottom: Preamble Commands. (line 2472)
* raggedright: Basic Commands. (line 1442)
* raisebox: Uncategorized. (line 2063)
* rangle: Uncategorized. (line 2066)
* rawhtml: Environments. (line 2886)
* rceil: Uncategorized. (line 2068)
* Re: Uncategorized. (line 2070)
* ref: Uncategorized. (line 2072)
* Ref: HyperLatex Commands.
(line 2746)
* refstepcounter: Uncategorized. (line 2074)
* renewcommand: Preamble Commands. (line 2474)
* renewenvironment: Preamble Commands. (line 2476)
* renewtheorem: Preamble Commands. (line 2478)
* resizebox: Preamble Commands. (line 2481)
* resizebox*: Preamble Commands. (line 2483)
* rfloor: Uncategorized. (line 2076)
* rfoot: Preamble Commands. (line 2485)
* rhead: Preamble Commands. (line 2487)
* rho: Uncategorized. (line 2078)
* right: Uncategorized. (line 2080)
* Rightarrow: Uncategorized. (line 2082)
* rightarrow: Uncategorized. (line 2084)
* rightharpoonup: Uncategorized. (line 2086)
* rightleftarrows: Uncategorized. (line 2088)
* rightleftharpoons: Uncategorized. (line 2090)
* rightrightarrows: Uncategorized. (line 2092)
* rm: Font Commands. (line 1482)
* rm <1>: Environments. (line 2889)
* rmfamily: Font Commands. (line 1483)
* rmfamily <1>: Environments. (line 2891)
* Roman: Uncategorized. (line 2094)
* roman: Uncategorized. (line 2097)
* rq: French Commands. (line 2584)
* rqq: French Commands. (line 2585)
* rule: Uncategorized. (line 2100)
* S: HyperLatex Commands.
(line 2747)
* samepage: Uncategorized. (line 2102)
* savebox: Uncategorized. (line 2105)
* sbox: Uncategorized. (line 2108)
* sc: Font Commands. (line 1484)
* sc <1>: Environments. (line 2893)
* scfamily: Font Commands. (line 1485)
* scriptsize: Font Commands. (line 1486)
* scshape: Font Commands. (line 1487)
* scshape <1>: Environments. (line 2895)
* searrow: Uncategorized. (line 2111)
* section: Sectioning Commands.
(line 1566)
* section*: Sectioning Commands.
(line 1567)
* secundo: French Commands. (line 2586)
* setbox: Uncategorized. (line 2113)
* setcounter: Preamble Commands. (line 2489)
* setlength: Preamble Commands. (line 2491)
* settowidth: Uncategorized. (line 2115)
* sf: Font Commands. (line 1488)
* sf <1>: Environments. (line 2897)
* sffamily: Font Commands. (line 1489)
* sffamily <1>: Environments. (line 2899)
* shortcite: Apacite Commands. (line 2714)
* shortcite <1>: AuthorDate Commands.
(line 2723)
* shortciteA: Apacite Commands. (line 2715)
* shortciteauthor: Apacite Commands. (line 2716)
* shortciteNP: Apacite Commands. (line 2717)
* sigma: Uncategorized. (line 2118)
* Sigma: Uncategorized. (line 2120)
* signature: Preamble Commands. (line 2493)
* signature <1>: Letter Commands. (line 2531)
* sim: Uncategorized. (line 2122)
* simeq: Uncategorized. (line 2124)
* sl: Font Commands. (line 1490)
* sl <1>: Environments. (line 2901)
* SLiTeX: Logos. (line 1526)
* sloppypar: Environments. (line 2903)
* slshape: Font Commands. (line 1491)
* slshape <1>: Environments. (line 2905)
* small: Font Commands. (line 1492)
* small <1>: Environments. (line 2907)
* smallskip: Uncategorized. (line 2126)
* spadesuit: Uncategorized. (line 2128)
* sqrt: Uncategorized. (line 2130)
* ssmall: Font Commands. (line 1493)
* stackrel: Uncategorized. (line 2132)
* stepcounter: Uncategorized. (line 2134)
* stretch: Uncategorized. (line 2137)
* subparagraph: Sectioning Commands.
(line 1568)
* subparagraph*: Sectioning Commands.
(line 1569)
* subsection: Sectioning Commands.
(line 1570)
* subsection*: Sectioning Commands.
(line 1571)
* subset: Uncategorized. (line 2140)
* subseteq: Uncategorized. (line 2142)
* subsubsection: Sectioning Commands.
(line 1572)
* subsubsection*: Sectioning Commands.
(line 1573)
* succ: Uncategorized. (line 2144)
* sum: Uncategorized. (line 2146)
* sum <1>: Uncategorized. (line 2148)
* superieura: French Commands. (line 2587)
* supset: Uncategorized. (line 2150)
* supseteq: Uncategorized. (line 2152)
* surd: Uncategorized. (line 2154)
* swarrow: Uncategorized. (line 2156)
* tabbing: Environments. (line 2909)
* table: Environments. (line 2911)
* table*: Environments. (line 2913)
* tableofcontents: Uncategorized. (line 2158)
* tabular: Environments. (line 2915)
* tabular*: Environments. (line 2917)
* tau: Uncategorized. (line 2160)
* tertio: French Commands. (line 2588)
* TeX: Logos. (line 1527)
* textalpha: Uncategorized. (line 2162)
* textbeta: Uncategorized. (line 2164)
* textbf: Font Commands. (line 1494)
* textbullet: Uncategorized. (line 2166)
* textchi: Uncategorized. (line 2168)
* textcolor: Uncategorized. (line 2170)
* textDelta: Uncategorized. (line 2172)
* textdelta: Uncategorized. (line 2174)
* textellipsis: Uncategorized. (line 2176)
* textepsilon: Uncategorized. (line 2178)
* texteta: Uncategorized. (line 2180)
* textfont: Font Commands. (line 1495)
* textGamma: Uncategorized. (line 2182)
* textgamma: Uncategorized. (line 2184)
* textheight: Preamble Commands. (line 2495)
* textiota: Uncategorized. (line 2186)
* textit: Font Commands. (line 1496)
* textkappa: Uncategorized. (line 2188)
* textLambda: Uncategorized. (line 2190)
* textlambda: Uncategorized. (line 2192)
* textmd: Font Commands. (line 1497)
* textmu: Uncategorized. (line 2194)
* textnormal: Font Commands. (line 1498)
* textnu: Uncategorized. (line 2196)
* textOmega: Uncategorized. (line 2198)
* textomega: Uncategorized. (line 2200)
* textperiodcentered: Uncategorized. (line 2202)
* textPhi: Uncategorized. (line 2204)
* textphi: Uncategorized. (line 2206)
* textPi: Uncategorized. (line 2208)
* textpi: Uncategorized. (line 2210)
* textPsi: Uncategorized. (line 2212)
* textpsi: Uncategorized. (line 2214)
* textrm: Font Commands. (line 1499)
* textsc: Font Commands. (line 1500)
* textsf: Font Commands. (line 1501)
* textSigma: Uncategorized. (line 2216)
* textsigma: Uncategorized. (line 2218)
* textsl: Font Commands. (line 1502)
* textsubscript: Uncategorized. (line 2220)
* textsuperscript: Uncategorized. (line 2222)
* textTau: Uncategorized. (line 2224)
* texttau: Uncategorized. (line 2226)
* textTheta: Uncategorized. (line 2228)
* texttheta: Uncategorized. (line 2230)
* texttt: Font Commands. (line 1503)
* textup: Font Commands. (line 1504)
* textwidth: Preamble Commands. (line 2497)
* textXi: Uncategorized. (line 2232)
* textxi: Uncategorized. (line 2234)
* textzeta: Uncategorized. (line 2236)
* thanks: Uncategorized. (line 2238)
* the: Basic Commands. (line 1443)
* thebibliography: Environments. (line 2919)
* theendnotes: Preamble Commands. (line 2499)
* theindex: Environments. (line 2921)
* thepage: Preamble Commands. (line 2501)
* therefore: Uncategorized. (line 2240)
* Theta: Uncategorized. (line 2242)
* theta: Uncategorized. (line 2244)
* thispagestyle: Preamble Commands. (line 2503)
* tikzpicture: Uncategorized. (line 2246)
* tilde: Special Characters. (line 1552)
* times: Uncategorized. (line 2248)
* tiny: Font Commands. (line 1505)
* title: Uncategorized. (line 2250)
* titlepage: Environments. (line 2924)
* to: Uncategorized. (line 2252)
* today: Basic Commands. (line 1444)
* topmargin: Preamble Commands. (line 2506)
* triangleleft: Uncategorized. (line 2254)
* triangleright: Uncategorized. (line 2256)
* tt: Font Commands. (line 1506)
* tt <1>: Environments. (line 2926)
* ttfamily: Font Commands. (line 1507)
* ttfamily <1>: Environments. (line 2928)
* twocolumn: Uncategorized. (line 2258)
* typeaout: Uncategorized. (line 2260)
* Typein: Uncategorized. (line 2263)
* typein: Uncategorized. (line 2266)
* typeout: Uncategorized. (line 2269)
* u: Special Characters. (line 1553)
* underbar: Font Commands. (line 1508)
* underline: Font Commands. (line 1509)
* up: French Commands. (line 2589)
* Uparrow: Uncategorized. (line 2272)
* uparrow: Uncategorized. (line 2274)
* updownarrow: Uncategorized. (line 2276)
* Updownarrow: Uncategorized. (line 2278)
* upshape: Font Commands. (line 1510)
* upsilon: Uncategorized. (line 2280)
* Upsilon: Uncategorized. (line 2282)
* url: Uncategorized. (line 2284)
* usebox: Uncategorized. (line 2286)
* usepackage: Preamble Commands. (line 2508)
* usepackage [options] {acronym}: Acronym Commands. (line 2777)
* uv: Czech Commands. (line 2554)
* v: Special Characters. (line 1554)
* value: Uncategorized. (line 2289)
* varepsilon: Uncategorized. (line 2291)
* varnothing: Uncategorized. (line 2293)
* varphi: Uncategorized. (line 2295)
* varpi: Uncategorized. (line 2297)
* varpropto: Uncategorized. (line 2299)
* varsigma: Uncategorized. (line 2301)
* vartheta: Uncategorized. (line 2303)
* vbox: Uncategorized. (line 2305)
* vcenter: Basic Commands. (line 1445)
* vdots: Uncategorized. (line 2307)
* vec: Special Characters. (line 1555)
* vee: Uncategorized. (line 2309)
* verb: Uncategorized. (line 2311)
* verb*: Uncategorized. (line 2313)
* verbatim: Environments. (line 2930)
* Verbatim: Environments. (line 2932)
* verbositylevel: Preamble Commands. (line 2510)
* verse: Environments. (line 2934)
* voffset: Preamble Commands. (line 2512)
* vref: Uncategorized. (line 2315)
* vsize: Uncategorized. (line 2317)
* vskip: Uncategorized. (line 2319)
* vspace: Uncategorized. (line 2321)
* vspace*: Uncategorized. (line 2323)
* wedge: Uncategorized. (line 2325)
* wp: Uncategorized. (line 2327)
* xi: Uncategorized. (line 2329)
* Xi: Uncategorized. (line 2331)
* xlink: HyperLatex Commands.
(line 2748)
* zeta: Uncategorized. (line 2333)
10 Concept Index
****************
* Menu:
* %latex2rtf: Conditional Parsing.
(line 1072)
* APA Support: APA Support. (line 1031)
* apacite: Cross References. (line 837)
* apalike: Cross References. (line 837)
* apanat1b: Cross References. (line 837)
* authordate: Cross References. (line 837)
* babel: Language Support. (line 781)
* bibliography: Cross References. (line 825)
* bibliography, apacite: Cross References. (line 837)
* bibliography, apalike: Cross References. (line 837)
* bibliography, apanat1b: Cross References. (line 837)
* bibliography, authordate: Cross References. (line 837)
* bibliography, BibTeX: Cross References. (line 830)
* bibliography, harvard: Cross References. (line 837)
* bibliography, natbib: Cross References. (line 837)
* BibTeX: Cross References. (line 830)
* Conditional Parsing: Conditional Parsing.
(line 1072)
* Copyright issues: History. (line 1288)
* direct.cfg: Input Processing. (line 1044)
* double spacing: Page Formatting. (line 870)
* equations: Equations. (line 880)
* footnotes: Cross References. (line 847)
* geometry package: Page Formatting. (line 870)
* graphics: Graphics. (line 986)
* harvard: Cross References. (line 837)
* History of the program: History. (line 1288)
* hyperlatex: Hyperlatex. (line 1008)
* iflatextortf: Conditional Parsing.
(line 1072)
* ignore.cfg: Input Processing. (line 1044)
* index: Cross References. (line 849)
* input processing: Input Processing. (line 1044)
* installation: Installation. (line 85)
* language support: Language Support. (line 781)
* line spacing: Page Formatting. (line 870)
* margins: Page Formatting. (line 870)
* math: Math and Special Symbols.
(line 933)
* natbib: Cross References. (line 837)
* page formatting: Page Formatting. (line 870)
* pagestyles: Pagestyles. (line 995)
* RTF sucks: Introduction. (line 74)
* setspace package: Page Formatting. (line 870)
* special symbols: Math and Special Symbols.
(line 933)
* tables: Tables. (line 973)
LaTeX2RTF
1 Introduction
2 Installation
2.1 General
2.2 Obtaining LaTeX2RTF
2.3 UNIX
2.4 plain DOS
2.5 MS Windows systems
2.6 Macintosh
2.7 Problems Compiling
2.8 Problems with 'make check'
3 Using LaTeX2RTF
3.1 General Assumptions
3.2 LaTeX2RTF Options
3.3 Debugging
4 Features
4.1 LaTeX2e
4.2 Unicode Support
4.3 Input Encoding
4.4 Language Support
4.5 Cross References
4.6 Page Formatting
4.7 Equations
4.8 Math and Special Symbols
4.9 Tables
4.10 Graphics
4.11 Pagestyles
4.12 Hyperlatex
4.13 APA Support
5 Configuration
5.1 Input processing
5.2 Conditional Parsing
5.3 Output Formatting
5.4 Direct Conversion
5.5 Ignore Command
5.6 Font Configuration
5.7 Language Configuration
6 Error Messages and Logging
7 History & Copyright
8 LaTeX2RTF under Development
8.1 Unimplemented Features
8.2 Missing options
8.3 Known Bugs
8.4 Reporting Bugs
8.5 Todo List
8.6 Command List
8.6.1 General Commands
8.6.1.1 Basic Commands
8.6.1.2 Font Commands
8.6.1.3 Logos
8.6.1.4 Special Characters
8.6.1.5 Sectioning Commands
8.6.1.6 Uncategorized
8.6.2 Preamble Commands
8.6.3 Letter Commands
8.6.4 Language Commands
8.6.4.1 German Commands
8.6.4.2 Czech Commands
8.6.4.3 French Commands
8.6.4.4 Russian Commands
8.6.5 Citation Commands
8.6.5.1 Apacite Commands
8.6.5.2 AuthorDate Commands
8.6.5.3 Harvard Commands
8.6.5.4 HyperLatex Commands
8.6.5.5 Apacite Commands
8.6.6 Acronym Commands
8.6.7 Other Commands
8.6.8 Environments
9 Function Index
10 Concept Index
Generated by dwww version 1.15 on Sun Jun 16 16:50:59 CEST 2024.