“Clang” CFE Internals Manual

Introduction

This document describes some of the more important APIs and internal design decisions made in the Clang C front-end. The purpose of this document is to both capture some of this high level information and also describe some of the design decisions behind it. This is meant for people interested in hacking on Clang, not for end-users. The description below is categorized by libraries, and does not describe any of the clients of the libraries.

LLVM Support Library

The LLVM libSupport library provides many underlying libraries and data-structures, including command line option processing, various containers and a system abstraction layer, which is used for file system access.

The Clang “Basic” Library

This library certainly needs a better name. The “basic” library contains a number of low-level utilities for tracking and manipulating source buffers, locations within the source buffers, diagnostics, tokens, target abstraction, and information about the subset of the language being compiled for.

Part of this infrastructure is specific to C (such as the TargetInfo class), other parts could be reused for other non-C-based languages (SourceLocation, SourceManager, Diagnostics, FileManager). When and if there is future demand we can figure out if it makes sense to introduce a new library, move the general classes somewhere else, or introduce some other solution.

We describe the roles of these classes in order of their dependencies.

The Diagnostics Subsystem

The Clang Diagnostics subsystem is an important part of how the compiler communicates with the human. Diagnostics are the warnings and errors produced when the code is incorrect or dubious. In Clang, each diagnostic produced has (at the minimum) a unique ID, an English translation associated with it, a SourceLocation to “put the caret”, and a severity (e.g., WARNING or ERROR). They can also optionally include a number of arguments to the diagnostic (which fill in “%0“‘s in the string) as well as a number of source ranges that related to the diagnostic.

In this section, we’ll be giving examples produced by the Clang command line driver, but diagnostics can be rendered in many different ways depending on how the DiagnosticConsumer interface is implemented. A representative example of a diagnostic is:

t.c:38:15: error: invalid operands to binary expression ('int *' and '_Complex float')
P = (P-42) + Gamma*4;
    ~~~~~~ ^ ~~~~~~~

In this example, you can see the English translation, the severity (error), you can see the source location (the caret (”^”) and file/line/column info), the source ranges “~~~~”, arguments to the diagnostic (”int*” and “_Complex float”). You’ll have to believe me that there is a unique ID backing the diagnostic :).

Getting all of this to happen has several steps and involves many moving pieces, this section describes them and talks about best practices when adding a new diagnostic.

The Diagnostic*Kinds.td files

Diagnostics are created by adding an entry to one of the clang/Basic/Diagnostic*Kinds.td files, depending on what library will be using it. From this file, tblgen generates the unique ID of the diagnostic, the severity of the diagnostic and the English translation + format string.

There is little sanity with the naming of the unique ID’s right now. Some start with err_, warn_, ext_ to encode the severity into the name. Since the enum is referenced in the C++ code that produces the diagnostic, it is somewhat useful for it to be reasonably short.

The severity of the diagnostic comes from the set {NOTE, REMARK, WARNING, EXTENSION, EXTWARN, ERROR}. The ERROR severity is used for diagnostics indicating the program is never acceptable under any circumstances. When an error is emitted, the AST for the input code may not be fully built. The EXTENSION and EXTWARN severities are used for extensions to the language that Clang accepts. This means that Clang fully understands and can represent them in the AST, but we produce diagnostics to tell the user their code is non-portable. The difference is that the former are ignored by default, and the later warn by default. The WARNING severity is used for constructs that are valid in the currently selected source language but that are dubious in some way. The REMARK severity provides generic information about the compilation that is not necessarily related to any dubious code. The NOTE level is used to staple more information onto previous diagnostics.

These severities are mapped into a smaller set (the Diagnostic::Level enum, {Ignored, Note, Remark, Warning, Error, Fatal}) of output levels by the diagnostics subsystem based on various configuration options. Clang internally supports a fully fine grained mapping mechanism that allows you to map almost any diagnostic to the output level that you want. The only diagnostics that cannot be mapped are NOTEs, which always follow the severity of the previously emitted diagnostic and ERRORs, which can only be mapped to Fatal (it is not possible to turn an error into a warning, for example).

Diagnostic mappings are used in many ways. For example, if the user specifies -pedantic, EXTENSION maps to Warning, if they specify -pedantic-errors, it turns into Error. This is used to implement options like -Wunused_macros, -Wundef etc.

Mapping to Fatal should only be used for diagnostics that are considered so severe that error recovery won’t be able to recover sensibly from them (thus spewing a ton of bogus errors). One example of this class of error are failure to #include a file.

The Format String

The format string for the diagnostic is very simple, but it has some power. It takes the form of a string in English with markers that indicate where and how arguments to the diagnostic are inserted and formatted. For example, here are some simple format strings:

"binary integer literals are an extension"
"format string contains '\\0' within the string body"
"more '%%' conversions than data arguments"
"invalid operands to binary expression (%0 and %1)"
"overloaded '%0' must be a %select{unary|binary|unary or binary}2 operator"
     " (has %1 parameter%s1)"

These examples show some important points of format strings. You can use any plain ASCII character in the diagnostic string except “%” without a problem, but these are C strings, so you have to use and be aware of all the C escape sequences (as in the second example). If you want to produce a “%” in the output, use the “%%” escape sequence, like the third diagnostic. Finally, Clang uses the “%...[digit]” sequences to specify where and how arguments to the diagnostic are formatted.

Arguments to the diagnostic are numbered according to how they are specified by the C++ code that produces them, and are referenced by %0 .. %9. If you have more than 10 arguments to your diagnostic, you are doing something wrong :). Unlike printf, there is no requirement that arguments to the diagnostic end up in the output in the same order as they are specified, you could have a format string with “%1 %0” that swaps them, for example. The text in between the percent and digit are formatting instructions. If there are no instructions, the argument is just turned into a string and substituted in.

Here are some “best practices” for writing the English format string:

  • Keep the string short. It should ideally fit in the 80 column limit of the DiagnosticKinds.td file. This avoids the diagnostic wrapping when printed, and forces you to think about the important point you are conveying with the diagnostic.

  • Take advantage of location information. The user will be able to see the line and location of the caret, so you don’t need to tell them that the problem is with the 4th argument to the function: just point to it.

  • Do not capitalize the diagnostic string, and do not end it with a period.

  • If you need to quote something in the diagnostic string, use single quotes.

Diagnostics should never take random English strings as arguments: you shouldn’t use “you have a problem with %0” and pass in things like “your argument” or “your return value” as arguments. Doing this prevents translating the Clang diagnostics to other languages (because they’ll get random English words in their otherwise localized diagnostic). The exceptions to this are C/C++ language keywords (e.g., auto, const, mutable, etc) and C/C++ operators (/=). Note that things like “pointer” and “reference” are not keywords. On the other hand, you can include anything that comes from the user’s source code, including variable names, types, labels, etc. The “select” format can be used to achieve this sort of thing in a localizable way, see below.

Formatting a Diagnostic Argument

Arguments to diagnostics are fully typed internally, and come from a couple different classes: integers, types, names, and random strings. Depending on the class of the argument, it can be optionally formatted in different ways. This gives the DiagnosticConsumer information about what the argument means without requiring it to use a specific presentation (consider this MVC for Clang :).

Here are the different diagnostic argument formats currently supported by Clang:

“s” format

Example:

"requires %1 parameter%s1"

Class:

Integers

Description:

This is a simple formatter for integers that is useful when producing English diagnostics. When the integer is 1, it prints as nothing. When the integer is not 1, it prints as “s”. This allows some simple grammatical forms to be to be handled correctly, and eliminates the need to use gross things like "requires %1 parameter(s)".

“select” format

Example:

"must be a %select{unary|binary|unary or binary}2 operator"

Class:

Integers

Description:

This format specifier is used to merge multiple related diagnostics together into one common one, without requiring the difference to be specified as an English string argument. Instead of specifying the string, the diagnostic gets an integer argument and the format string selects the numbered option. In this case, the “%2” value must be an integer in the range [0..2]. If it is 0, it prints “unary”, if it is 1 it prints “binary” if it is 2, it prints “unary or binary”. This allows other language translations to substitute reasonable words (or entire phrases) based on the semantics of the diagnostic instead of having to do things textually. The selected string does undergo formatting.

“plural” format

Example:

"you have %1 %plural{1:mouse|:mice}1 connected to your computer"

Class:

Integers

Description:

This is a formatter for complex plural forms. It is designed to handle even the requirements of languages with very complex plural forms, as many Baltic languages have. The argument consists of a series of expression/form pairs, separated by “:”, where the first form whose expression evaluates to true is the result of the modifier.

An expression can be empty, in which case it is always true. See the example at the top. Otherwise, it is a series of one or more numeric conditions, separated by “,”. If any condition matches, the expression matches. Each numeric condition can take one of three forms.

  • number: A simple decimal number matches if the argument is the same as the number. Example: "%plural{1:mouse|:mice}4"

  • range: A range in square brackets matches if the argument is within the range. Then range is inclusive on both ends. Example: "%plural{0:none|1:one|[2,5]:some|:many}2"

  • modulo: A modulo operator is followed by a number, and equals sign and either a number or a range. The tests are the same as for plain numbers and ranges, but the argument is taken modulo the number first. Example: "%plural{%100=0:even hundred|%100=[1,50]:lower half|:everything else}1"

The parser is very unforgiving. A syntax error, even whitespace, will abort, as will a failure to match the argument against any expression.

“ordinal” format

Example:

"ambiguity in %ordinal0 argument"

Class:

Integers

Description:

This is a formatter which represents the argument number as an ordinal: the value 1 becomes 1st, 3 becomes 3rd, and so on. Values less than 1 are not supported. This formatter is currently hard-coded to use English ordinals.

“objcclass” format

Example:

"method %objcclass0 not found"

Class:

DeclarationName

Description:

This is a simple formatter that indicates the DeclarationName corresponds to an Objective-C class method selector. As such, it prints the selector with a leading “+”.

“objcinstance” format

Example:

"method %objcinstance0 not found"

Class:

DeclarationName

Description:

This is a simple formatter that indicates the DeclarationName corresponds to an Objective-C instance method selector. As such, it prints the selector with a leading “-“.

“q” format

Example:

"candidate found by name lookup is %q0"

Class:

NamedDecl *

Description:

This formatter indicates that the fully-qualified name of the declaration should be printed, e.g., “std::vector” rather than “vector”.

“diff” format

Example:

"no known conversion %diff{from $ to $|from argument type to parameter type}1,2"

Class:

QualType

Description:

This formatter takes two QualTypes and attempts to print a template difference between the two. If tree printing is off, the text inside the braces before the pipe is printed, with the formatted text replacing the $. If tree printing is on, the text after the pipe is printed and a type tree is printed after the diagnostic message.

It is really easy to add format specifiers to the Clang diagnostics system, but they should be discussed before they are added. If you are creating a lot of repetitive diagnostics and/or have an idea for a useful formatter, please bring it up on the cfe-dev mailing list.

“sub” format

Example:

Given the following record definition of type TextSubstitution:

def select_ovl_candidate : TextSubstitution<
  "%select{function|constructor}0%select{| template| %2}1">;

which can be used as

def note_ovl_candidate : Note<
  "candidate %sub{select_ovl_candidate}3,2,1 not viable">;

and will act as if it was written "candidate %select{function|constructor}3%select{| template| %1}2 not viable".

Description:

This format specifier is used to avoid repeating strings verbatim in multiple diagnostics. The argument to %sub must name a TextSubstitution tblgen record. The substitution must specify all arguments used by the substitution, and the modifier indexes in the substitution are re-numbered accordingly. The substituted text must itself be a valid format string before substitution.

Producing the Diagnostic

Now that you’ve created the diagnostic in the Diagnostic*Kinds.td file, you need to write the code that detects the condition in question and emits the new diagnostic. Various components of Clang (e.g., the preprocessor, Sema, etc.) provide a helper function named “Diag”. It creates a diagnostic and accepts the arguments, ranges, and other information that goes along with it.

For example, the binary expression error comes from code like this:

if (various things that are bad)
  Diag(Loc, diag::err_typecheck_invalid_operands)
    << lex->getType() << rex->getType()
    << lex->getSourceRange() << rex->getSourceRange();

This shows that use of the Diag method: it takes a location (a SourceLocation object) and a diagnostic enum value (which matches the name from Diagnostic*Kinds.td). If the diagnostic takes arguments, they are specified with the << operator: the first argument becomes %0, the second becomes %1, etc. The diagnostic interface allows you to specify arguments of many different types, including int and unsigned for integer arguments, const char* and std::string for string arguments, DeclarationName and const IdentifierInfo * for names, QualType for types, etc. SourceRanges are also specified with the << operator, but do not have a specific ordering requirement.

As you can see, adding and producing a diagnostic is pretty straightforward. The hard part is deciding exactly what you need to say to help the user, picking a suitable wording, and providing the information needed to format it correctly. The good news is that the call site that issues a diagnostic should be completely independent of how the diagnostic is formatted and in what language it is rendered.

Fix-It Hints

In some cases, the front end emits diagnostics when it is clear that some small change to the source code would fix the problem. For example, a missing semicolon at the end of a statement or a use of deprecated syntax that is easily rewritten into a more modern form. Clang tries very hard to emit the diagnostic and recover gracefully in these and other cases.

However, for these cases where the fix is obvious, the diagnostic can be annotated with a hint (referred to as a “fix-it hint”) that describes how to change the code referenced by the diagnostic to fix the problem. For example, it might add the missing semicolon at the end of the statement or rewrite the use of a deprecated construct into something more palatable. Here is one such example from the C++ front end, where we warn about the right-shift operator changing meaning from C++98 to C++11:

test.cpp:3:7: warning: use of right-shift operator ('>>') in template argument
                       will require parentheses in C++11
A<100 >> 2> *a;
      ^
  (       )

Here, the fix-it hint is suggesting that parentheses be added, and showing exactly where those parentheses would be inserted into the source code. The fix-it hints themselves describe what changes to make to the source code in an abstract manner, which the text diagnostic printer renders as a line of “insertions” below the caret line. Other diagnostic clients might choose to render the code differently (e.g., as markup inline) or even give the user the ability to automatically fix the problem.

Fix-it hints on errors and warnings need to obey these rules:

  • Since they are automatically applied if -Xclang -fixit is passed to the driver, they should only be used when it’s very likely they match the user’s intent.

  • Clang must recover from errors as if the fix-it had been applied.

  • Fix-it hints on a warning must not change the meaning of the code. However, a hint may clarify the meaning as intentional, for example by adding parentheses when the precedence of operators isn’t obvious.

If a fix-it can’t obey these rules, put the fix-it on a note. Fix-its on notes are not applied automatically.

All fix-it hints are described by the FixItHint class, instances of which should be attached to the diagnostic using the << operator in the same way that highlighted source ranges and arguments are passed to the diagnostic. Fix-it hints can be created with one of three constructors:

  • FixItHint::CreateInsertion(Loc, Code)

    Specifies that the given Code (a string) should be inserted before the source location Loc.

  • FixItHint::CreateRemoval(Range)

    Specifies that the code in the given source Range should be removed.

  • FixItHint::CreateReplacement(Range, Code)

    Specifies that the code in the given source Range should be removed, and replaced with the given Code string.

The DiagnosticConsumer Interface

Once code generates a diagnostic with all of the arguments and the rest of the relevant information, Clang needs to know what to do with it. As previously mentioned, the diagnostic machinery goes through some filtering to map a severity onto a diagnostic level, then (assuming the diagnostic is not mapped to “Ignore”) it invokes an object that implements the DiagnosticConsumer interface with the information.

It is possible to implement this interface in many different ways. For example, the normal Clang DiagnosticConsumer (named TextDiagnosticPrinter) turns the arguments into strings (according to the various formatting rules), prints out the file/line/column information and the string, then prints out the line of code, the source ranges, and the caret. However, this behavior isn’t required.

Another implementation of the DiagnosticConsumer interface is the TextDiagnosticBuffer class, which is used when Clang is in -verify mode. Instead of formatting and printing out the diagnostics, this implementation just captures and remembers the diagnostics as they fly by. Then -verify compares the list of produced diagnostics to the list of expected ones. If they disagree, it prints out its own output. Full documentation for the -verify mode can be found in the Clang API documentation for VerifyDiagnosticConsumer.

There are many other possible implementations of this interface, and this is why we prefer diagnostics to pass down rich structured information in arguments. For example, an HTML output might want declaration names be linkified to where they come from in the source. Another example is that a GUI might let you click on typedefs to expand them. This application would want to pass significantly more information about types through to the GUI than a simple flat string. The interface allows this to happen.

Adding Translations to Clang

Not possible yet! Diagnostic strings should be written in UTF-8, the client can translate to the relevant code page if needed. Each translation completely replaces the format string for the diagnostic.

The SourceLocation and SourceManager classes

Strangely enough, the SourceLocation class represents a location within the source code of the program. Important design points include:

  1. sizeof(SourceLocation) must be extremely small, as these are embedded into many AST nodes and are passed around often. Currently it is 32 bits.

  2. SourceLocation must be a simple value object that can be efficiently copied.

  3. We should be able to represent a source location for any byte of any input file. This includes in the middle of tokens, in whitespace, in trigraphs, etc.

  4. A SourceLocation must encode the current #include stack that was active when the location was processed. For example, if the location corresponds to a token, it should contain the set of #includes active when the token was lexed. This allows us to print the #include stack for a diagnostic.

  5. SourceLocation must be able to describe macro expansions, capturing both the ultimate instantiation point and the source of the original character data.

In practice, the SourceLocation works together with the SourceManager class to encode two pieces of information about a location: its spelling location and its expansion location. For most tokens, these will be the same. However, for a macro expansion (or tokens that came from a _Pragma directive) these will describe the location of the characters corresponding to the token and the location where the token was used (i.e., the macro expansion point or the location of the _Pragma itself).

The Clang front-end inherently depends on the location of a token being tracked correctly. If it is ever incorrect, the front-end may get confused and die. The reason for this is that the notion of the “spelling” of a Token in Clang depends on being able to find the original input characters for the token. This concept maps directly to the “spelling location” for the token.

SourceRange and CharSourceRange

Clang represents most source ranges by [first, last], where “first” and “last” each point to the beginning of their respective tokens. For example consider the SourceRange of the following statement:

x = foo + bar;
^first    ^last

To map from this representation to a character-based representation, the “last” location needs to be adjusted to point to (or past) the end of that token with either Lexer::MeasureTokenLength() or Lexer::getLocForEndOfToken(). For the rare cases where character-level source ranges information is needed we use the CharSourceRange class.

The Driver Library

The clang Driver and library are documented here.

Precompiled Headers

Clang supports precompiled headers (PCH), which uses a serialized representation of Clang’s internal data structures, encoded with the LLVM bitstream format.

The Frontend Library

The Frontend library contains functionality useful for building tools on top of the Clang libraries, for example several methods for outputting diagnostics.

Compiler Invocation

One of the classes provided by the Frontend library is CompilerInvocation, which holds information that describe current invocation of the Clang -cc1 frontend. The information typically comes from the command line constructed by the Clang driver or from clients performing custom initialization. The data structure is split into logical units used by different parts of the compiler, for example PreprocessorOptions, LanguageOptions or CodeGenOptions.

Command Line Interface

The command line interface of the Clang -cc1 frontend is defined alongside the driver options in clang/Driver/Options.td. The information making up an option definition includes its prefix and name (for example -std=), form and position of the option value, help text, aliases and more. Each option may belong to a certain group and can be marked with zero or more flags. Options accepted by the -cc1 frontend are marked with the CC1Option flag.

Command Line Parsing

Option definitions are processed by the -gen-opt-parser-defs tablegen backend during early stages of the build. Options are then used for querying an instance llvm::opt::ArgList, a wrapper around the command line arguments. This is done in the Clang driver to construct individual jobs based on the driver arguments and also in the CompilerInvocation::CreateFromArgs function that parses the -cc1 frontend arguments.

Command Line Generation

Any valid CompilerInvocation created from a -cc1 command line can be also serialized back into semantically equivalent command line in a deterministic manner. This enables features such as implicitly discovered, explicitly built modules.

Adding new Command Line Option

When adding a new command line option, the first place of interest is the header file declaring the corresponding options class (e.g. CodeGenOptions.h for command line option that affects the code generation). Create new member variable for the option value:

  class CodeGenOptions : public CodeGenOptionsBase {

+   /// List of dynamic shared object files to be loaded as pass plugins.
+   std::vector<std::string> PassPlugins;

  }

Next, declare the command line interface of the option in the tablegen file clang/include/clang/Driver/Options.td. This is done by instantiating the Option class (defined in llvm/include/llvm/Option/OptParser.td). The instance is typically created through one of the helper classes that encode the acceptable ways to specify the option value on the command line:

  • Flag - the option does not accept any value,

  • Joined - the value must immediately follow the option name within the same argument,

  • Separate - the value must follow the option name in the next command line argument,

  • JoinedOrSeparate - the value can be specified either as Joined or Separate,

  • CommaJoined - the values are comma-separated and must immediately follow the option name within the same argument (see Wl, for an example).

The helper classes take a list of acceptable prefixes of the option (e.g. "-", "--" or "/") and the option name:

  // Options.td

+ def fpass_plugin_EQ : Joined<["-"], "fpass-plugin=">;

Then, specify additional attributes via mix-ins:

  • HelpText holds the text that will be printed besides the option name when the user requests help (e.g. via clang --help).

  • Group specifies the “category” of options this option belongs to. This is used by various tools to filter certain options of interest.

  • Flags may contain a number of “tags” associated with the option. This enables more granular filtering than the Group attribute.

  • Alias denotes that the option is an alias of another option. This may be combined with AliasArgs that holds the implied value.

  // Options.td

  def fpass_plugin_EQ : Joined<["-"], "fpass-plugin=">,
+   Group<f_Group>, Flags<[CC1Option]>,
+   HelpText<"Load pass plugin from a dynamic shared object file.">;

New options are recognized by the Clang driver unless marked with the NoDriverOption flag. On the other hand, options intended for the -cc1 frontend must be explicitly marked with the CC1Option flag.

Next, parse (or manufacture) the command line arguments in the Clang driver and use them to construct the -cc1 job:

  void Clang::ConstructJob(const ArgList &Args /*...*/) const {
    ArgStringList CmdArgs;
    // ...

+   for (const Arg *A : Args.filtered(OPT_fpass_plugin_EQ)) {
+     CmdArgs.push_back(Args.MakeArgString(Twine("-fpass-plugin=") + A->getValue()));
+     A->claim();
+   }
  }

The last step is implementing the -cc1 command line argument parsing/generation that initializes/serializes the option class (in our case CodeGenOptions) stored within CompilerInvocation. This can be done automatically by using the marshalling annotations on the option definition:

  // Options.td

  def fpass_plugin_EQ : Joined<["-"], "fpass-plugin=">,
    Group<f_Group>, Flags<[CC1Option]>,
    HelpText<"Load pass plugin from a dynamic shared object file.">,
+   MarshallingInfoStringVector<CodeGenOpts<"PassPlugins">>;

Inner workings of the system are introduced in the marshalling infrastructure section and the available annotations are listed here.

In case the marshalling infrastructure does not support the desired semantics, consider simplifying it to fit the existing model. This makes the command line more uniform and reduces the amount of custom, manually written code. Remember that the -cc1 command line interface is intended only for Clang developers, meaning it does not need to mirror the driver interface, maintain backward compatibility or be compatible with GCC.

If the option semantics cannot be encoded via marshalling annotations, you can resort to parsing/serializing the command line arguments manually:

  // CompilerInvocation.cpp

  static bool ParseCodeGenArgs(CodeGenOptions &Opts, ArgList &Args /*...*/) {
    // ...

+   Opts.PassPlugins = Args.getAllArgValues(OPT_fpass_plugin_EQ);
  }

  static void GenerateCodeGenArgs(const CodeGenOptions &Opts,
                                  SmallVectorImpl<const char *> &Args,
                                  CompilerInvocation::StringAllocator SA /*...*/) {
    // ...

+   for (const std::string &PassPlugin : Opts.PassPlugins)
+     GenerateArg(Args, OPT_fpass_plugin_EQ, PassPlugin, SA);
  }

Finally, you can specify the argument on the command line: clang -fpass-plugin=a -fpass-plugin=b and use the new member variable as desired.

  void EmitAssemblyHelper::EmitAssemblyWithNewPassManager(/*...*/) {
    // ...
+   for (auto &PluginFN : CodeGenOpts.PassPlugins)
+     if (auto PassPlugin = PassPlugin::Load(PluginFN))
+        PassPlugin->registerPassBuilderCallbacks(PB);
  }

Option Marshalling Infrastructure

The option marshalling infrastructure automates the parsing of the Clang -cc1 frontend command line arguments into CompilerInvocation and their generation from CompilerInvocation. The system replaces lots of repetitive C++ code with simple, declarative tablegen annotations and it’s being used for the majority of the -cc1 command line interface. This section provides an overview of the system.

Note: The marshalling infrastructure is not intended for driver-only options. Only options of the -cc1 frontend need to be marshalled to/from CompilerInvocation instance.

To read and modify contents of CompilerInvocation, the marshalling system uses key paths, which are declared in two steps. First, a tablegen definition for the CompilerInvocation member is created by inheriting from KeyPathAndMacro:

// Options.td

class LangOpts<string field> : KeyPathAndMacro<"LangOpts->", field, "LANG_"> {}
//                   CompilerInvocation member  ^^^^^^^^^^
//                                    OPTION_WITH_MARSHALLING prefix ^^^^^

The first argument to the parent class is the beginning of the key path that references the CompilerInvocation member. This argument ends with -> if the member is a pointer type or with . if it’s a value type. The child class takes a single parameter field that is forwarded as the second argument to the base class. The child class can then be used like so: LangOpts<"IgnoreExceptions">, constructing a key path to the field LangOpts->IgnoreExceptions. The third argument passed to the parent class is a string that the tablegen backend uses as a prefix to the OPTION_WITH_MARSHALLING macro. Using the key path as a mix-in on an Option instance instructs the backend to generate the following code:

// Options.inc

#ifdef LANG_OPTION_WITH_MARSHALLING
LANG_OPTION_WITH_MARSHALLING([...], LangOpts->IgnoreExceptions, [...])
#endif // LANG_OPTION_WITH_MARSHALLING

Such definition can be used used in the function for parsing and generating command line:

// clang/lib/Frontend/CompilerInvoation.cpp

bool CompilerInvocation::ParseLangArgs(LangOptions *LangOpts, ArgList &Args,
                                       DiagnosticsEngine &Diags) {
  bool Success = true;

#define LANG_OPTION_WITH_MARSHALLING(                                          \
    PREFIX_TYPE, NAME, ID, KIND, GROUP, ALIAS, ALIASARGS, FLAGS, PARAM,        \
    HELPTEXT, METAVAR, VALUES, SPELLING, SHOULD_PARSE, ALWAYS_EMIT, KEYPATH,   \
    DEFAULT_VALUE, IMPLIED_CHECK, IMPLIED_VALUE, NORMALIZER, DENORMALIZER,     \
    MERGER, EXTRACTOR, TABLE_INDEX)                                            \
  PARSE_OPTION_WITH_MARSHALLING(Args, Diags, Success, ID, FLAGS, PARAM,        \
                                SHOULD_PARSE, KEYPATH, DEFAULT_VALUE,          \
                                IMPLIED_CHECK, IMPLIED_VALUE, NORMALIZER,      \
                                MERGER, TABLE_INDEX)
#include "clang/Driver/Options.inc"
#undef LANG_OPTION_WITH_MARSHALLING

  // ...

  return Success;
}

void CompilerInvocation::GenerateLangArgs(LangOptions *LangOpts,
                                          SmallVectorImpl<const char *> &Args,
                                          StringAllocator SA) {
#define LANG_OPTION_WITH_MARSHALLING(                                          \
    PREFIX_TYPE, NAME, ID, KIND, GROUP, ALIAS, ALIASARGS, FLAGS, PARAM,        \
    HELPTEXT, METAVAR, VALUES, SPELLING, SHOULD_PARSE, ALWAYS_EMIT, KEYPATH,   \
    DEFAULT_VALUE, IMPLIED_CHECK, IMPLIED_VALUE, NORMALIZER, DENORMALIZER,     \
    MERGER, EXTRACTOR, TABLE_INDEX)                                            \
  GENERATE_OPTION_WITH_MARSHALLING(                                            \
      Args, SA, KIND, FLAGS, SPELLING, ALWAYS_EMIT, KEYPATH, DEFAULT_VALUE,    \
      IMPLIED_CHECK, IMPLIED_VALUE, DENORMALIZER, EXTRACTOR, TABLE_INDEX)
#include "clang/Driver/Options.inc"
#undef LANG_OPTION_WITH_MARSHALLING

  // ...
}

The PARSE_OPTION_WITH_MARSHALLING and GENERATE_OPTION_WITH_MARSHALLING macros are defined in CompilerInvocation.cpp and they implement the generic algorithm for parsing and generating command line arguments.

Option Marshalling Annotations

How does the tablegen backend know what to put in place of [...] in the generated Options.inc? This is specified by the Marshalling utilities described below. All of them take a key path argument and possibly other information required for parsing or generating the command line argument.

Note: The marshalling infrastructure is not intended for driver-only options. Only options of the -cc1 frontend need to be marshalled to/from CompilerInvocation instance.

Positive Flag

The key path defaults to false and is set to true when the flag is present on command line.

def fignore_exceptions : Flag<["-"], "fignore-exceptions">, Flags<[CC1Option]>,
  MarshallingInfoFlag<LangOpts<"IgnoreExceptions">>;

Negative Flag

The key path defaults to true and is set to false when the flag is present on command line.

def fno_verbose_asm : Flag<["-"], "fno-verbose-asm">, Flags<[CC1Option]>,
  MarshallingInfoNegativeFlag<CodeGenOpts<"AsmVerbose">>;

Negative and Positive Flag

The key path defaults to the specified value (false, true or some boolean value that’s statically unknown in the tablegen file). Then, the key path is set to the value associated with the flag that appears last on command line.

defm legacy_pass_manager : BoolOption<"f", "legacy-pass-manager",
  CodeGenOpts<"LegacyPassManager">, DefaultFalse,
  PosFlag<SetTrue, [], "Use the legacy pass manager in LLVM">,
  NegFlag<SetFalse, [], "Use the new pass manager in LLVM">,
  BothFlags<[CC1Option]>>;

With most such pair of flags, the -cc1 frontend accepts only the flag that changes the default key path value. The Clang driver is responsible for accepting both and either forwarding the changing flag or discarding the flag that would just set the key path to its default.

The first argument to BoolOption is a prefix that is used to construct the full names of both flags. The positive flag would then be named flegacy-pass-manager and the negative fno-legacy-pass-manager. BoolOption also implies the - prefix for both flags. It’s also possible to use BoolFOption that implies the "f" prefix and Group<f_Group>. The PosFlag and NegFlag classes hold the associated boolean value, an array of elements passed to the Flag class and the help text. The optional BothFlags class holds an array of Flag elements that are common for both the positive and negative flag and their common help text suffix.

String

The key path defaults to the specified string, or an empty one, if omitted. When the option appears on the command line, the argument value is simply copied.

def isysroot : JoinedOrSeparate<["-"], "isysroot">, Flags<[CC1Option]>,
  MarshallingInfoString<HeaderSearchOpts<"Sysroot">, [{"/"}]>;

List of Strings

The key path defaults to an empty std::vector<std::string>. Values specified with each appearance of the option on the command line are appended to the vector.

def frewrite_map_file : Separate<["-"], "frewrite-map-file">, Flags<[CC1Option]>,
  MarshallingInfoStringVector<CodeGenOpts<"RewriteMapFiles">>;

Integer

The key path defaults to the specified integer value, or 0 if omitted. When the option appears on the command line, its value gets parsed by llvm::APInt and the result is assigned to the key path on success.

def mstack_probe_size : Joined<["-"], "mstack-probe-size=">, Flags<[CC1Option]>,
  MarshallingInfoInt<CodeGenOpts<"StackProbeSize">, "4096">;

Enumeration

The key path defaults to the value specified in MarshallingInfoEnum prefixed by the contents of NormalizedValuesScope and ::. This ensures correct reference to an enum case is formed even if the enum resides in different namespace or is an enum class. If the value present on command line does not match any of the comma-separated values from Values, an error diagnostics is issued. Otherwise, the corresponding element from NormalizedValues at the same index is assigned to the key path (also correctly scoped). The number of comma-separated string values and elements of the array within NormalizedValues must match.

def mthread_model : Separate<["-"], "mthread-model">, Flags<[CC1Option]>,
  Values<"posix,single">, NormalizedValues<["POSIX", "Single"]>,
  NormalizedValuesScope<"LangOptions::ThreadModelKind">,
  MarshallingInfoEnum<LangOpts<"ThreadModel">, "POSIX">;

It is also possible to define relationships between options.

Implication

The key path defaults to the default value from the primary Marshalling annotation. Then, if any of the elements of ImpliedByAnyOf evaluate to true, the key path value is changed to the specified value or true if missing. Finally, the command line is parsed according to the primary annotation.

def fms_extensions : Flag<["-"], "fms-extensions">, Flags<[CC1Option]>,
  MarshallingInfoFlag<LangOpts<"MicrosoftExt">>,
  ImpliedByAnyOf<[fms_compatibility.KeyPath], "true">;

Condition

The option is parsed only if the expression in ShouldParseIf evaluates to true.

def fopenmp_enable_irbuilder : Flag<["-"], "fopenmp-enable-irbuilder">, Flags<[CC1Option]>,
  MarshallingInfoFlag<LangOpts<"OpenMPIRBuilder">>,
  ShouldParseIf<fopenmp.KeyPath>;

The Lexer and Preprocessor Library

The Lexer library contains several tightly-connected classes that are involved with the nasty process of lexing and preprocessing C source code. The main interface to this library for outside clients is the large Preprocessor class. It contains the various pieces of state that are required to coherently read tokens out of a translation unit.

The core interface to the Preprocessor object (once it is set up) is the Preprocessor::Lex method, which returns the next Token from the preprocessor stream. There are two types of token providers that the preprocessor is capable of reading from: a buffer lexer (provided by the Lexer class) and a buffered token stream (provided by the TokenLexer class).

The Token class

The Token class is used to represent a single lexed token. Tokens are intended to be used by the lexer/preprocess and parser libraries, but are not intended to live beyond them (for example, they should not live in the ASTs).

Tokens most often live on the stack (or some other location that is efficient to access) as the parser is running, but occasionally do get buffered up. For example, macro definitions are stored as a series of tokens, and the C++ front-end periodically needs to buffer tokens up for tentative parsing and various pieces of look-ahead. As such, the size of a Token matters. On a 32-bit system, sizeof(Token) is currently 16 bytes.

Tokens occur in two forms: annotation tokens and normal tokens. Normal tokens are those returned by the lexer, annotation tokens represent semantic information and are produced by the parser, replacing normal tokens in the token stream. Normal tokens contain the following information:

  • A SourceLocation — This indicates the location of the start of the token.

  • A length — This stores the length of the token as stored in the SourceBuffer. For tokens that include them, this length includes trigraphs and escaped newlines which are ignored by later phases of the compiler. By pointing into the original source buffer, it is always possible to get the original spelling of a token completely accurately.

  • IdentifierInfo — If a token takes the form of an identifier, and if identifier lookup was enabled when the token was lexed (e.g., the lexer was not reading in “raw” mode) this contains a pointer to the unique hash value for the identifier. Because the lookup happens before keyword identification, this field is set even for language keywords like “for”.

  • TokenKind — This indicates the kind of token as classified by the lexer. This includes things like tok::starequal (for the “*=” operator), tok::ampamp for the “&&” token, and keyword values (e.g., tok::kw_for) for identifiers that correspond to keywords. Note that some tokens can be spelled multiple ways. For example, C++ supports “operator keywords”, where things like “and” are treated exactly like the “&&” operator. In these cases, the kind value is set to tok::ampamp, which is good for the parser, which doesn’t have to consider both forms. For something that cares about which form is used (e.g., the preprocessor “stringize” operator) the spelling indicates the original form.

  • Flags — There are currently four flags tracked by the lexer/preprocessor system on a per-token basis:

    1. StartOfLine — This was the first token that occurred on its input source line.

    2. LeadingSpace — There was a space character either immediately before the token or transitively before the token as it was expanded through a macro. The definition of this flag is very closely defined by the stringizing requirements of the preprocessor.

    3. DisableExpand — This flag is used internally to the preprocessor to represent identifier tokens which have macro expansion disabled. This prevents them from being considered as candidates for macro expansion ever in the future.

    4. NeedsCleaning — This flag is set if the original spelling for the token includes a trigraph or escaped newline. Since this is uncommon, many pieces of code can fast-path on tokens that did not need cleaning.

One interesting (and somewhat unusual) aspect of normal tokens is that they don’t contain any semantic information about the lexed value. For example, if the token was a pp-number token, we do not represent the value of the number that was lexed (this is left for later pieces of code to decide). Additionally, the lexer library has no notion of typedef names vs variable names: both are returned as identifiers, and the parser is left to decide whether a specific identifier is a typedef or a variable (tracking this requires scope information among other things). The parser can do this translation by replacing tokens returned by the preprocessor with “Annotation Tokens”.

Annotation Tokens

Annotation tokens are tokens that are synthesized by the parser and injected into the preprocessor’s token stream (replacing existing tokens) to record semantic information found by the parser. For example, if “foo” is found to be a typedef, the “footok::identifier token is replaced with an tok::annot_typename. This is useful for a couple of reasons: 1) this makes it easy to handle qualified type names (e.g., “foo::bar::baz<42>::t”) in C++ as a single “token” in the parser. 2) if the parser backtracks, the reparse does not need to redo semantic analysis to determine whether a token sequence is a variable, type, template, etc.

Annotation tokens are created by the parser and reinjected into the parser’s token stream (when backtracking is enabled). Because they can only exist in tokens that the preprocessor-proper is done with, it doesn’t need to keep around flags like “start of line” that the preprocessor uses to do its job. Additionally, an annotation token may “cover” a sequence of preprocessor tokens (e.g., “a::b::c” is five preprocessor tokens). As such, the valid fields of an annotation token are different than the fields for a normal token (but they are multiplexed into the normal Token fields):

  • SourceLocation “Location” — The SourceLocation for the annotation token indicates the first token replaced by the annotation token. In the example above, it would be the location of the “a” identifier.

  • SourceLocation “AnnotationEndLoc” — This holds the location of the last token replaced with the annotation token. In the example above, it would be the location of the “c” identifier.

  • void* “AnnotationValue” — This contains an opaque object that the parser gets from Sema. The parser merely preserves the information for Sema to later interpret based on the annotation token kind.

  • TokenKind “Kind” — This indicates the kind of Annotation token this is. See below for the different valid kinds.

Annotation tokens currently come in three kinds:

  1. tok::annot_typename: This annotation token represents a resolved typename token that is potentially qualified. The AnnotationValue field contains the QualType returned by Sema::getTypeName(), possibly with source location information attached.

  2. tok::annot_cxxscope: This annotation token represents a C++ scope specifier, such as “A::B::”. This corresponds to the grammar productions “::” and “:: [opt] nested-name-specifier”. The AnnotationValue pointer is a NestedNameSpecifier * returned by the Sema::ActOnCXXGlobalScopeSpecifier and Sema::ActOnCXXNestedNameSpecifier callbacks.

  3. tok::annot_template_id: This annotation token represents a C++ template-id such as “foo<int, 4>”, where “foo” is the name of a template. The AnnotationValue pointer is a pointer to a malloc’d TemplateIdAnnotation object. Depending on the context, a parsed template-id that names a type might become a typename annotation token (if all we care about is the named type, e.g., because it occurs in a type specifier) or might remain a template-id token (if we want to retain more source location information or produce a new type, e.g., in a declaration of a class template specialization). template-id annotation tokens that refer to a type can be “upgraded” to typename annotation tokens by the parser.

As mentioned above, annotation tokens are not returned by the preprocessor, they are formed on demand by the parser. This means that the parser has to be aware of cases where an annotation could occur and form it where appropriate. This is somewhat similar to how the parser handles Translation Phase 6 of C99: String Concatenation (see C99 5.1.1.2). In the case of string concatenation, the preprocessor just returns distinct tok::string_literal and tok::wide_string_literal tokens and the parser eats a sequence of them wherever the grammar indicates that a string literal can occur.

In order to do this, whenever the parser expects a tok::identifier or tok::coloncolon, it should call the TryAnnotateTypeOrScopeToken or TryAnnotateCXXScopeToken methods to form the annotation token. These methods will maximally form the specified annotation tokens and replace the current token with them, if applicable. If the current tokens is not valid for an annotation token, it will remain an identifier or “::” token.

The Lexer class

The Lexer class provides the mechanics of lexing tokens out of a source buffer and deciding what they mean. The Lexer is complicated by the fact that it operates on raw buffers that have not had spelling eliminated (this is a necessity to get decent performance), but this is countered with careful coding as well as standard performance techniques (for example, the comment handling code is vectorized on X86 and PowerPC hosts).

The lexer has a couple of interesting modal features:

  • The lexer can operate in “raw” mode. This mode has several features that make it possible to quickly lex the file (e.g., it stops identifier lookup, doesn’t specially handle preprocessor tokens, handles EOF differently, etc). This mode is used for lexing within an “#if 0” block, for example.

  • The lexer can capture and return comments as tokens. This is required to support the -C preprocessor mode, which passes comments through, and is used by the diagnostic checker to identifier expect-error annotations.

  • The lexer can be in ParsingFilename mode, which happens when preprocessing after reading a #include directive. This mode changes the parsing of “<” to return an “angled string” instead of a bunch of tokens for each thing within the filename.

  • When parsing a preprocessor directive (after “#”) the ParsingPreprocessorDirective mode is entered. This changes the parser to return EOD at a newline.

  • The Lexer uses a LangOptions object to know whether trigraphs are enabled, whether C++ or ObjC keywords are recognized, etc.

In addition to these modes, the lexer keeps track of a couple of other features that are local to a lexed buffer, which change as the buffer is lexed:

  • The Lexer uses BufferPtr to keep track of the current character being lexed.

  • The Lexer uses IsAtStartOfLine to keep track of whether the next lexed token will start with its “start of line” bit set.

  • The Lexer keeps track of the current “#if” directives that are active (which can be nested).

  • The Lexer keeps track of an MultipleIncludeOpt object, which is used to detect whether the buffer uses the standard “#ifndef XX / #define XX” idiom to prevent multiple inclusion. If a buffer does, subsequent includes can be ignored if the “XX” macro is defined.

The TokenLexer class

The TokenLexer class is a token provider that returns tokens from a list of tokens that came from somewhere else. It typically used for two things: 1) returning tokens from a macro definition as it is being expanded 2) returning tokens from an arbitrary buffer of tokens. The later use is used by _Pragma and will most likely be used to handle unbounded look-ahead for the C++ parser.

The MultipleIncludeOpt class

The MultipleIncludeOpt class implements a really simple little state machine that is used to detect the standard “#ifndef XX / #define XX” idiom that people typically use to prevent multiple inclusion of headers. If a buffer uses this idiom and is subsequently #include’d, the preprocessor can simply check to see whether the guarding condition is defined or not. If so, the preprocessor can completely ignore the include of the header.

The Parser Library

This library contains a recursive-descent parser that polls tokens from the preprocessor and notifies a client of the parsing progress.

Historically, the parser used to talk to an abstract Action interface that had virtual methods for parse events, for example ActOnBinOp(). When Clang grew C++ support, the parser stopped supporting general Action clients – it now always talks to the Sema library. However, the Parser still accesses AST objects only through opaque types like ExprResult and StmtResult. Only Sema looks at the AST node contents of these wrappers.

The AST Library

Design philosophy

Immutability

Clang AST nodes (types, declarations, statements, expressions, and so on) are generally designed to be immutable once created. This provides a number of key benefits:

  • Canonicalization of the “meaning” of nodes is possible as soon as the nodes are created, and is not invalidated by later addition of more information. For example, we canonicalize types, and use a canonicalized representation of expressions when determining whether two function template declarations involving dependent expressions declare the same entity.

  • AST nodes can be reused when they have the same meaning. For example, we reuse Type nodes when representing the same type (but maintain separate TypeLocs for each instance where a type is written), and we reuse non-dependent Stmt and Expr nodes across instantiations of a template.

  • Serialization and deserialization of the AST to/from AST files is simpler: we do not need to track modifications made to AST nodes imported from AST files and serialize separate “update records”.

There are unfortunately exceptions to this general approach, such as:

  • The first declaration of a redeclarable entity maintains a pointer to the most recent declaration of that entity, which naturally needs to change as more declarations are parsed.

  • Name lookup tables in declaration contexts change after the namespace declaration is formed.

  • We attempt to maintain only a single declaration for an instantiation of a template, rather than having distinct declarations for an instantiation of the declaration versus the definition, so template instantiation often updates parts of existing declarations.

  • Some parts of declarations are required to be instantiated separately (this includes default arguments and exception specifications), and such instantiations update the existing declaration.

These cases tend to be fragile; mutable AST state should be avoided where possible.

As a consequence of this design principle, we typically do not provide setters for AST state. (Some are provided for short-term modifications intended to be used immediately after an AST node is created and before it’s “published” as part of the complete AST, or where language semantics require after-the-fact updates.)

Faithfulness

The AST intends to provide a representation of the program that is faithful to the original source. We intend for it to be possible to write refactoring tools using only information stored in, or easily reconstructible from, the Clang AST. This means that the AST representation should either not desugar source-level constructs to simpler forms, or – where made necessary by language semantics or a clear engineering tradeoff – should desugar minimally and wrap the result in a construct representing the original source form.

For example, CXXForRangeStmt directly represents the syntactic form of a range-based for statement, but also holds a semantic representation of the range declaration and iterator declarations. It does not contain a fully-desugared ForStmt, however.

Some AST nodes (for example, ParenExpr) represent only syntax, and others (for example, ImplicitCastExpr) represent only semantics, but most nodes will represent a combination of syntax and associated semantics. Inheritance is typically used when representing different (but related) syntaxes for nodes with the same or similar semantics.

The Type class and its subclasses

The Type class (and its subclasses) are an important part of the AST. Types are accessed through the ASTContext class, which implicitly creates and uniques them as they are needed. Types have a couple of non-obvious features: 1) they do not capture type qualifiers like const or volatile (see QualType), and 2) they implicitly capture typedef information. Once created, types are immutable (unlike decls).

Typedefs in C make semantic analysis a bit more complex than it would be without them. The issue is that we want to capture typedef information and represent it in the AST perfectly, but the semantics of operations need to “see through” typedefs. For example, consider this code:

void func() {
  typedef int foo;
  foo X, *Y;
  typedef foo *bar;
  bar Z;
  *X; // error
  **Y; // error
  **Z; // error
}

The code above is illegal, and thus we expect there to be diagnostics emitted on the annotated lines. In this example, we expect to get:

test.c:6:1: error: indirection requires pointer operand ('foo' invalid)
  *X; // error
  ^~
test.c:7:1: error: indirection requires pointer operand ('foo' invalid)
  **Y; // error
  ^~~
test.c:8:1: error: indirection requires pointer operand ('foo' invalid)
  **Z; // error
  ^~~

While this example is somewhat silly, it illustrates the point: we want to retain typedef information where possible, so that we can emit errors about “std::string” instead of “std::basic_string<char, std:...”. Doing this requires properly keeping typedef information (for example, the type of X is “foo”, not “int”), and requires properly propagating it through the various operators (for example, the type of *Y is “foo”, not “int”). In order to retain this information, the type of these expressions is an instance of the TypedefType class, which indicates that the type of these expressions is a typedef for “foo”.

Representing types like this is great for diagnostics, because the user-specified type is always immediately available. There are two problems with this: first, various semantic checks need to make judgements about the actual structure of a type, ignoring typedefs. Second, we need an efficient way to query whether two types are structurally identical to each other, ignoring typedefs. The solution to both of these problems is the idea of canonical types.

Canonical Types

Every instance of the Type class contains a canonical type pointer. For simple types with no typedefs involved (e.g., “int”, “int*”, “int**”), the type just points to itself. For types that have a typedef somewhere in their structure (e.g., “foo”, “foo*”, “foo**”, “bar”), the canonical type pointer points to their structurally equivalent type without any typedefs (e.g., “int”, “int*”, “int**”, and “int*” respectively).

This design provides a constant time operation (dereferencing the canonical type pointer) that gives us access to the structure of types. For example, we can trivially tell that “bar” and “foo*” are the same type by dereferencing their canonical type pointers and doing a pointer comparison (they both point to the single “int*” type).

Canonical types and typedef types bring up some complexities that must be carefully managed. Specifically, the isa/cast/dyn_cast operators generally shouldn’t be used in code that is inspecting the AST. For example, when type checking the indirection operator (unary “*” on a pointer), the type checker must verify that the operand has a pointer type. It would not be correct to check that with “isa<PointerType>(SubExpr->getType())”, because this predicate would fail if the subexpression had a typedef type.

The solution to this problem are a set of helper methods on Type, used to check their properties. In this case, it would be correct to use “SubExpr->getType()->isPointerType()” to do the check. This predicate will return true if the canonical type is a pointer, which is true any time the type is structurally a pointer type. The only hard part here is remembering not to use the isa/cast/dyn_cast operations.

The second problem we face is how to get access to the pointer type once we know it exists. To continue the example, the result type of the indirection operator is the pointee type of the subexpression. In order to determine the type, we need to get the instance of PointerType that best captures the typedef information in the program. If the type of the expression is literally a PointerType, we can return that, otherwise we have to dig through the typedefs to find the pointer type. For example, if the subexpression had type “foo*”, we could return that type as the result. If the subexpression had type “bar”, we want to return “foo*” (note that we do not want “int*”). In order to provide all of this, Type has a getAsPointerType() method that checks whether the type is structurally a PointerType and, if so, returns the best one. If not, it returns a null pointer.

This structure is somewhat mystical, but after meditating on it, it will make sense to you :).

The QualType class

The QualType class is designed as a trivial value class that is small, passed by-value and is efficient to query. The idea of QualType is that it stores the type qualifiers (const, volatile, restrict, plus some extended qualifiers required by language extensions) separately from the types themselves. QualType is conceptually a pair of “Type*” and the bits for these type qualifiers.

By storing the type qualifiers as bits in the conceptual pair, it is extremely efficient to get the set of qualifiers on a QualType (just return the field of the pair), add a type qualifier (which is a trivial constant-time operation that sets a bit), and remove one or more type qualifiers (just return a QualType with the bitfield set to empty).

Further, because the bits are stored outside of the type itself, we do not need to create duplicates of types with different sets of qualifiers (i.e. there is only a single heap allocated “int” type: “const int” and “volatile const int” both point to the same heap allocated “int” type). This reduces the heap size used to represent bits and also means we do not have to consider qualifiers when uniquing types (Type does not even contain qualifiers).

In practice, the two most common type qualifiers (const and restrict) are stored in the low bits of the pointer to the Type object, together with a flag indicating whether extended qualifiers are present (which must be heap-allocated). This means that QualType is exactly the same size as a pointer.

Declaration names

The DeclarationName class represents the name of a declaration in Clang. Declarations in the C family of languages can take several different forms. Most declarations are named by simple identifiers, e.g., “f” and “x” in the function declaration f(int x). In C++, declaration names can also name class constructors (”Class” in struct Class { Class(); }), class destructors (”~Class”), overloaded operator names (”operator+”), and conversion functions (”operator void const *”). In Objective-C, declaration names can refer to the names of Objective-C methods, which involve the method name and the parameters, collectively called a selector, e.g., “setWidth:height:”. Since all of these kinds of entities — variables, functions, Objective-C methods, C++ constructors, destructors, and operators — are represented as subclasses of Clang’s common NamedDecl class, DeclarationName is designed to efficiently represent any kind of name.

Given a DeclarationName N, N.getNameKind() will produce a value that describes what kind of name N stores. There are 10 options (all of the names are inside the DeclarationName class).

Identifier

The name is a simple identifier. Use N.getAsIdentifierInfo() to retrieve the corresponding IdentifierInfo* pointing to the actual identifier.

ObjCZeroArgSelector, ObjCOneArgSelector, ObjCMultiArgSelector

The name is an Objective-C selector, which can be retrieved as a Selector instance via N.getObjCSelector(). The three possible name kinds for Objective-C reflect an optimization within the DeclarationName class: both zero- and one-argument selectors are stored as a masked IdentifierInfo pointer, and therefore require very little space, since zero- and one-argument selectors are far more common than multi-argument selectors (which use a different structure).

CXXConstructorName

The name is a C++ constructor name. Use N.getCXXNameType() to retrieve the type that this constructor is meant to construct. The type is always the canonical type, since all constructors for a given type have the same name.

CXXDestructorName

The name is a C++ destructor name. Use N.getCXXNameType() to retrieve the type whose destructor is being named. This type is always a canonical type.

CXXConversionFunctionName

The name is a C++ conversion function. Conversion functions are named according to the type they convert to, e.g., “operator void const *”. Use N.getCXXNameType() to retrieve the type that this conversion function converts to. This type is always a canonical type.

CXXOperatorName

The name is a C++ overloaded operator name. Overloaded operators are named according to their spelling, e.g., “operator+” or “operator new []”. Use N.getCXXOverloadedOperator() to retrieve the overloaded operator (a value of type OverloadedOperatorKind).

CXXLiteralOperatorName

The name is a C++11 user defined literal operator. User defined Literal operators are named according to the suffix they define, e.g., “_foo” for “operator "" _foo”. Use N.getCXXLiteralIdentifier() to retrieve the corresponding IdentifierInfo* pointing to the identifier.

CXXUsingDirective

The name is a C++ using directive. Using directives are not really NamedDecls, in that they all have the same name, but they are implemented as such in order to store them in DeclContext effectively.

DeclarationNames are cheap to create, copy, and compare. They require only a single pointer’s worth of storage in the common cases (identifiers, zero- and one-argument Objective-C selectors) and use dense, uniqued storage for the other kinds of names. Two DeclarationNames can be compared for equality (==, !=) using a simple bitwise comparison, can be ordered with <, >, <=, and >= (which provide a lexicographical ordering for normal identifiers but an unspecified ordering for other kinds of names), and can be placed into LLVM DenseMaps and DenseSets.

DeclarationName instances can be created in different ways depending on what kind of name the instance will store. Normal identifiers (IdentifierInfo pointers) and Objective-C selectors (Selector) can be implicitly converted to DeclarationNames. Names for C++ constructors, destructors, conversion functions, and overloaded operators can be retrieved from the DeclarationNameTable, an instance of which is available as ASTContext::DeclarationNames. The member functions getCXXConstructorName, getCXXDestructorName, getCXXConversionFunctionName, and getCXXOperatorName, respectively, return DeclarationName instances for the four kinds of C++ special function names.

Declaration contexts

Every declaration in a program exists within some declaration context, such as a translation unit, namespace, class, or function. Declaration contexts in Clang are represented by the DeclContext class, from which the various declaration-context AST nodes (TranslationUnitDecl, NamespaceDecl, RecordDecl, FunctionDecl, etc.) will derive. The DeclContext class provides several facilities common to each declaration context:

Source-centric vs. Semantics-centric View of Declarations

DeclContext provides two views of the declarations stored within a declaration context. The source-centric view accurately represents the program source code as written, including multiple declarations of entities where present (see the section Redeclarations and Overloads), while the semantics-centric view represents the program semantics. The two views are kept synchronized by semantic analysis while the ASTs are being constructed.

Storage of declarations within that context

Every declaration context can contain some number of declarations. For example, a C++ class (represented by RecordDecl) contains various member functions, fields, nested types, and so on. All of these declarations will be stored within the DeclContext, and one can iterate over the declarations via [DeclContext::decls_begin(), DeclContext::decls_end()). This mechanism provides the source-centric view of declarations in the context.

Lookup of declarations within that context

The DeclContext structure provides efficient name lookup for names within that declaration context. For example, if N is a namespace we can look for the name N::f using DeclContext::lookup. The lookup itself is based on a lazily-constructed array (for declaration contexts with a small number of declarations) or hash table (for declaration contexts with more declarations). The lookup operation provides the semantics-centric view of the declarations in the context.

Ownership of declarations

The DeclContext owns all of the declarations that were declared within its declaration context, and is responsible for the management of their memory as well as their (de-)serialization.

All declarations are stored within a declaration context, and one can query information about the context in which each declaration lives. One can retrieve the DeclContext that contains a particular Decl using Decl::getDeclContext. However, see the section Lexical and Semantic Contexts for more information about how to interpret this context information.

Redeclarations and Overloads

Within a translation unit, it is common for an entity to be declared several times. For example, we might declare a function “f” and then later re-declare it as part of an inlined definition:

void f(int x, int y, int z = 1);

inline void f(int x, int y, int z) { /* ...  */ }

The representation of “f” differs in the source-centric and semantics-centric views of a declaration context. In the source-centric view, all redeclarations will be present, in the order they occurred in the source code, making this view suitable for clients that wish to see the structure of the source code. In the semantics-centric view, only the most recent “f” will be found by the lookup, since it effectively replaces the first declaration of “f”.

(Note that because f can be redeclared at block scope, or in a friend declaration, etc. it is possible that the declaration of f found by name lookup will not be the most recent one.)

In the semantics-centric view, overloading of functions is represented explicitly. For example, given two declarations of a function “g” that are overloaded, e.g.,

void g();
void g(int);

the DeclContext::lookup operation will return a DeclContext::lookup_result that contains a range of iterators over declarations of “g”. Clients that perform semantic analysis on a program that is not concerned with the actual source code will primarily use this semantics-centric view.

Lexical and Semantic Contexts

Each declaration has two potentially different declaration contexts: a lexical context, which corresponds to the source-centric view of the declaration context, and a semantic context, which corresponds to the semantics-centric view. The lexical context is accessible via Decl::getLexicalDeclContext while the semantic context is accessible via Decl::getDeclContext, both of which return DeclContext pointers. For most declarations, the two contexts are identical. For example:

class X {
public:
  void f(int x);
};

Here, the semantic and lexical contexts of X::f are the DeclContext associated with the class X (itself stored as a RecordDecl AST node). However, we can now define X::f out-of-line:

void X::f(int x = 17) { /* ...  */ }

This definition of “f” has different lexical and semantic contexts. The lexical context corresponds to the declaration context in which the actual declaration occurred in the source code, e.g., the translation unit containing X. Thus, this declaration of X::f can be found by traversing the declarations provided by [decls_begin(), decls_end()) in the translation unit.

The semantic context of X::f corresponds to the class X, since this member function is (semantically) a member of X. Lookup of the name f into the DeclContext associated with X will then return the definition of X::f (including information about the default argument).

Transparent Declaration Contexts

In C and C++, there are several contexts in which names that are logically declared inside another declaration will actually “leak” out into the enclosing scope from the perspective of name lookup. The most obvious instance of this behavior is in enumeration types, e.g.,

enum Color {
  Red,
  Green,
  Blue
};

Here, Color is an enumeration, which is a declaration context that contains the enumerators Red, Green, and Blue. Thus, traversing the list of declarations contained in the enumeration Color will yield Red, Green, and Blue. However, outside of the scope of Color one can name the enumerator Red without qualifying the name, e.g.,

Color c = Red;

There are other entities in C++ that provide similar behavior. For example, linkage specifications that use curly braces:

extern "C" {
  void f(int);
  void g(int);
}
// f and g are visible here

For source-level accuracy, we treat the linkage specification and enumeration type as a declaration context in which its enclosed declarations (”Red”, “Green”, and “Blue”; “f” and “g”) are declared. However, these declarations are visible outside of the scope of the declaration context.

These language features (and several others, described below) have roughly the same set of requirements: declarations are declared within a particular lexical context, but the declarations are also found via name lookup in scopes enclosing the declaration itself. This feature is implemented via transparent declaration contexts (see DeclContext::isTransparentContext()), whose declarations are visible in the nearest enclosing non-transparent declaration context. This means that the lexical context of the declaration (e.g., an enumerator) will be the transparent DeclContext itself, as will the semantic context, but the declaration will be visible in every outer context up to and including the first non-transparent declaration context (since transparent declaration contexts can be nested).

The transparent DeclContexts are:

  • Enumerations (but not C++11 “scoped enumerations”):

    enum Color {
      Red,
      Green,
      Blue
    };
    // Red, Green, and Blue are in scope
    
  • C++ linkage specifications:

    extern "C" {
      void f(int);
      void g(int);
    }
    // f and g are in scope
    
  • Anonymous unions and structs:

    struct LookupTable {
      bool IsVector;
      union {
        std::vector<Item> *Vector;
        std::set<Item> *Set;
      };
    };
    
    LookupTable LT;
    LT.Vector = 0; // Okay: finds Vector inside the unnamed union
    
  • C++11 inline namespaces:

    namespace mylib {
      inline namespace debug {
        class X;
      }
    }
    mylib::X *xp; // okay: mylib::X refers to mylib::debug::X
    

Multiply-Defined Declaration Contexts

C++ namespaces have the interesting property that the namespace can be defined multiple times, and the declarations provided by each namespace definition are effectively merged (from the semantic point of view). For example, the following two code snippets are semantically indistinguishable:

// Snippet #1:
namespace N {
  void f();
}
namespace N {
  void f(int);
}

// Snippet #2:
namespace N {
  void f();
  void f(int);
}

In Clang’s representation, the source-centric view of declaration contexts will actually have two separate NamespaceDecl nodes in Snippet #1, each of which is a declaration context that contains a single declaration of “f”. However, the semantics-centric view provided by name lookup into the namespace N for “f” will return a DeclContext::lookup_result that contains a range of iterators over declarations of “f”.

DeclContext manages multiply-defined declaration contexts internally. The function DeclContext::getPrimaryContext retrieves the “primary” context for a given DeclContext instance, which is the DeclContext responsible for maintaining the lookup table used for the semantics-centric view. Given a DeclContext, one can obtain the set of declaration contexts that are semantically connected to this declaration context, in source order, including this context (which will be the only result, for non-namespace contexts) via DeclContext::collectAllContexts. Note that these functions are used internally within the lookup and insertion methods of the DeclContext, so the vast majority of clients can ignore them.

Because the same entity can be defined multiple times in different modules, it is also possible for there to be multiple definitions of (for instance) a CXXRecordDecl, all of which describe a definition of the same class. In such a case, only one of those “definitions” is considered by Clang to be the definition of the class, and the others are treated as non-defining declarations that happen to also contain member declarations. Corresponding members in each definition of such multiply-defined classes are identified either by redeclaration chains (if the members are Redeclarable) or by simply a pointer to the canonical declaration (if the declarations are not Redeclarable – in that case, a Mergeable base class is used instead).

Error Handling

Clang produces an AST even when the code contains errors. Clang won’t generate and optimize code for it, but it’s used as parsing continues to detect further errors in the input. Clang-based tools also depend on such ASTs, and IDEs in particular benefit from a high-quality AST for broken code.

In presence of errors, clang uses a few error-recovery strategies to present the broken code in the AST:

  • correcting errors: in cases where clang is confident about the fix, it provides a FixIt attaching to the error diagnostic and emits a corrected AST (reflecting the written code with FixIts applied). The advantage of that is to provide more accurate subsequent diagnostics. Typo correction is a typical example.

  • representing invalid node: the invalid node is preserved in the AST in some form, e.g. when the “declaration” part of the declaration contains semantic errors, the Decl node is marked as invalid.

  • dropping invalid node: this often happens for errors that we don’t have graceful recovery. Prior to Recovery AST, a mismatched-argument function call expression was dropped though a CallExpr was created for semantic analysis.

With these strategies, clang surfaces better diagnostics, and provides AST consumers a rich AST reflecting the written source code as much as possible even for broken code.

Recovery AST

The idea of Recovery AST is to use recovery nodes which act as a placeholder to maintain the rough structure of the parsing tree, preserve locations and children but have no language semantics attached to them.

For example, consider the following mismatched function call:

int NoArg();
void test(int abc) {
  NoArg(abc); // oops, mismatched function arguments.
}

Without Recovery AST, the invalid function call expression (and its child expressions) would be dropped in the AST:

|-FunctionDecl <line:1:1, col:11> NoArg 'int ()'
`-FunctionDecl <line:2:1, line:4:1> test 'void (int)'
 |-ParmVarDecl <col:11, col:15> col:15 used abc 'int'
 `-CompoundStmt <col:20, line:4:1>

With Recovery AST, the AST looks like:

|-FunctionDecl <line:1:1, col:11> NoArg 'int ()'
`-FunctionDecl <line:2:1, line:4:1> test 'void (int)'
  |-ParmVarDecl <col:11, col:15> used abc 'int'
  `-CompoundStmt <col:20, line:4:1>
    `-RecoveryExpr <line:3:3, col:12> 'int' contains-errors
      |-UnresolvedLookupExpr <col:3> '<overloaded function type>' lvalue (ADL) = 'NoArg'
      `-DeclRefExpr <col:9> 'int' lvalue ParmVar 'abc' 'int'

An alternative is to use existing Exprs, e.g. CallExpr for the above example. This would capture more call details (e.g. locations of parentheses) and allow it to be treated uniformly with valid CallExprs. However, jamming the data we have into CallExpr forces us to weaken its invariants, e.g. arg count may be wrong. This would introduce a huge burden on consumers of the AST to handle such “impossible” cases. So when we’re representing (rather than correcting) errors, we use a distinct recovery node type with extremely weak invariants instead.

RecoveryExpr is the only recovery node so far. In practice, broken decls need more detailed semantics preserved (the current Invalid flag works fairly well), and completely broken statements with interesting internal structure are rare (so dropping the statements is OK).

Types and dependence

RecoveryExpr is an Expr, so it must have a type. In many cases the true type can’t really be known until the code is corrected (e.g. a call to a function that doesn’t exist). And it means that we can’t properly perform type checks on some containing constructs, such as return 42 + unknownFunction().

To model this, we generalize the concept of dependence from C++ templates to mean dependence on a template parameter or how an error is repaired. The RecoveryExpr unknownFunction() has the totally unknown type DependentTy, and this suppresses type-based analysis in the same way it would inside a template.

In cases where we are confident about the concrete type (e.g. the return type for a broken non-overloaded function call), the RecoveryExpr will have this type. This allows more code to be typechecked, and produces a better AST and more diagnostics. For example:

unknownFunction().size() // .size() is a CXXDependentScopeMemberExpr
std::string(42).size() // .size() is a resolved MemberExpr

Whether or not the RecoveryExpr has a dependent type, it is always considered value-dependent, because its value isn’t well-defined until the error is resolved. Among other things, this means that clang doesn’t emit more errors where a RecoveryExpr is used as a constant (e.g. array size), but also won’t try to evaluate it.

ContainsErrors bit

Beyond the template dependence bits, we add a new “ContainsErrors” bit to express “Does this expression or anything within it contain errors” semantic, this bit is always set for RecoveryExpr, and propagated to other related nodes. This provides a fast way to query whether any (recursive) child of an expression had an error, which is often used to improve diagnostics.

// C++
void recoveryExpr(int abc) {
 unknownFunction(); // type-dependent, value-dependent, contains-errors

 std::string(42).size(); // value-dependent, contains-errors,
                         // not type-dependent, as we know the type is std::string
}
// C
void recoveryExpr(int abc) {
  unknownVar + abc; // type-dependent, value-dependent, contains-errors
}

The ASTImporter

The ASTImporter class imports nodes of an ASTContext into another ASTContext. Please refer to the document ASTImporter: Merging Clang ASTs for an introduction. And please read through the high-level description of the import algorithm, this is essential for understanding further implementation details of the importer.

Abstract Syntax Graph

Despite the name, the Clang AST is not a tree. It is a directed graph with cycles. One example of a cycle is the connection between a ClassTemplateDecl and its “templated” CXXRecordDecl. The templated CXXRecordDecl represents all the fields and methods inside the class template, while the ClassTemplateDecl holds the information which is related to being a template, i.e. template arguments, etc. We can get the templated class (the CXXRecordDecl) of a ClassTemplateDecl with ClassTemplateDecl::getTemplatedDecl(). And we can get back a pointer of the “described” class template from the templated class: CXXRecordDecl::getDescribedTemplate(). So, this is a cycle between two nodes: between the templated and the described node. There may be various other kinds of cycles in the AST especially in case of declarations.

Structural Equivalency

Importing one AST node copies that node into the destination ASTContext. To copy one node means that we create a new node in the “to” context then we set its properties to be equal to the properties of the source node. Before the copy, we make sure that the source node is not structurally equivalent to any existing node in the destination context. If it happens to be equivalent then we skip the copy.

The informal definition of structural equivalency is the following: Two nodes are structurally equivalent if they are

  • builtin types and refer to the same type, e.g. int and int are structurally equivalent,

  • function types and all their parameters have structurally equivalent types,

  • record types and all their fields in order of their definition have the same identifier names and structurally equivalent types,

  • variable or function declarations and they have the same identifier name and their types are structurally equivalent.

In C, two types are structurally equivalent if they are compatible types. For a formal definition of compatible types, please refer to 6.2.7/1 in the C11 standard. However, there is no definition for compatible types in the C++ standard. Still, we extend the definition of structural equivalency to templates and their instantiations similarly: besides checking the previously mentioned properties, we have to check for equivalent template parameters/arguments, etc.

The structural equivalent check can be and is used independently from the ASTImporter, e.g. the clang::Sema class uses it also.

The equivalence of nodes may depend on the equivalency of other pairs of nodes. Thus, the check is implemented as a parallel graph traversal. We traverse through the nodes of both graphs at the same time. The actual implementation is similar to breadth-first-search. Let’s say we start the traverse with the <A,B> pair of nodes. Whenever the traversal reaches a pair <X,Y> then the following statements are true:

  • A and X are nodes from the same ASTContext.

  • B and Y are nodes from the same ASTContext.

  • A and B may or may not be from the same ASTContext.

  • if A == X and B == Y (pointer equivalency) then (there is a cycle during the traverse)

    • A and B are structurally equivalent if and only if

      • All dependent nodes on the path from <A,B> to <X,Y> are structurally equivalent.

When we compare two classes or enums and one of them is incomplete or has unloaded external lexical declarations then we cannot descend to compare their contained declarations. So in these cases they are considered equal if they have the same names. This is the way how we compare forward declarations with definitions.

Redeclaration Chains

The early version of the ASTImporter’s merge mechanism squashed the declarations, i.e. it aimed to have only one declaration instead of maintaining a whole redeclaration chain. This early approach simply skipped importing a function prototype, but it imported a definition. To demonstrate the problem with this approach let’s consider an empty “to” context and the following virtual function declarations of f in the “from” context:

struct B { virtual void f(); };
void B::f() {} // <-- let's import this definition

If we imported the definition with the “squashing” approach then we would end-up having one declaration which is indeed a definition, but isVirtual() returns false for it. The reason is that the definition is indeed not virtual, it is the property of the prototype!

Consequently, we must either set the virtual flag for the definition (but then we create a malformed AST which the parser would never create), or we import the whole redeclaration chain of the function. The most recent version of the ASTImporter uses the latter mechanism. We do import all function declarations - regardless if they are definitions or prototypes - in the order as they appear in the “from” context.

If we have an existing definition in the “to” context, then we cannot import another definition, we will use the existing definition. However, we can import prototype(s): we chain the newly imported prototype(s) to the existing definition. Whenever we import a new prototype from a third context, that will be added to the end of the redeclaration chain. This may result in long redeclaration chains in certain cases, e.g. if we import from several translation units which include the same header with the prototype.

To mitigate the problem of long redeclaration chains of free functions, we could compare prototypes to see if they have the same properties and if yes then we could merge these prototypes. The implementation of squashing of prototypes for free functions is future work.

Chaining functions this way ensures that we do copy all information from the source AST. Nonetheless, there is a problem with member functions: While we can have many prototypes for free functions, we must have only one prototype for a member function.

void f(); // OK
void f(); // OK

struct X {
  void f(); // OK
  void f(); // ERROR
};
void X::f() {} // OK

Thus, prototypes of member functions must be squashed, we cannot just simply attach a new prototype to the existing in-class prototype. Consider the following contexts:

// "to" context
struct X {
  void f(); // D0
};
// "from" context
struct X {
  void f(); // D1
};
void X::f() {} // D2

When we import the prototype and the definition of f from the “from” context, then the resulting redecl chain will look like this D0 -> D2', where D2' is the copy of D2 in the “to” context.

Generally speaking, when we import declarations (like enums and classes) we do attach the newly imported declaration to the existing redeclaration chain (if there is structural equivalency). We do not import, however, the whole redeclaration chain as we do in case of functions. Up till now, we haven’t found any essential property of forward declarations which is similar to the case of the virtual flag in a member function prototype. In the future, this may change, though.

Traversal during the Import

The node specific import mechanisms are implemented in ASTNodeImporter::VisitNode() functions, e.g. VisitFunctionDecl(). When we import a declaration then first we import everything which is needed to call the constructor of that declaration node. Everything which can be set later is set after the node is created. For example, in case of a FunctionDecl we first import the declaration context in which the function is declared, then we create the FunctionDecl and only then we import the body of the function. This means there are implicit dependencies between AST nodes. These dependencies determine the order in which we visit nodes in the “from” context. As with the regular graph traversal algorithms like DFS, we keep track which nodes we have already visited in ASTImporter::ImportedDecls. Whenever we create a node then we immediately add that to the ImportedDecls. We must not start the import of any other declarations before we keep track of the newly created one. This is essential, otherwise, we would not be able to handle circular dependencies. To enforce this, we wrap all constructor calls of all AST nodes in GetImportedOrCreateDecl(). This wrapper ensures that all newly created declarations are immediately marked as imported; also, if a declaration is already marked as imported then we just return its counterpart in the “to” context. Consequently, calling a declaration’s ::Create() function directly would lead to errors, please don’t do that!

Even with the use of GetImportedOrCreateDecl() there is still a probability of having an infinite import recursion if things are imported from each other in wrong way. Imagine that during the import of A, the import of B is requested before we could create the node for A (the constructor needs a reference to B). And the same could be true for the import of B (A is requested to be imported before we could create the node for B). In case of the templated-described swing we take extra attention to break the cyclical dependency: we import and set the described template only after the CXXRecordDecl is created. As a best practice, before creating the node in the “to” context, avoid importing of other nodes which are not needed for the constructor of node A.

Error Handling

Every import function returns with either an llvm::Error or an llvm::Expected<T> object. This enforces to check the return value of the import functions. If there was an error during one import then we return with that error. (Exception: when we import the members of a class, we collect the individual errors with each member and we concatenate them in one Error object.) We cache these errors in cases of declarations. During the next import call if there is an existing error we just return with that. So, clients of the library receive an Error object, which they must check.

During import of a specific declaration, it may happen that some AST nodes had already been created before we recognize an error. In this case, we signal back the error to the caller, but the “to” context remains polluted with those nodes which had been created. Ideally, those nodes should not had been created, but that time we did not know about the error, the error happened later. Since the AST is immutable (most of the cases we can’t remove existing nodes) we choose to mark these nodes as erroneous.

We cache the errors associated with declarations in the “from” context in ASTImporter::ImportDeclErrors and the ones which are associated with the “to” context in ASTImporterSharedState::ImportErrors. Note that, there may be several ASTImporter objects which import into the same “to” context but from different “from” contexts; in this case, they have to share the associated errors of the “to” context.

When an error happens, that propagates through the call stack, through all the dependant nodes. However, in case of dependency cycles, this is not enough, because we strive to mark the erroneous nodes so clients can act upon. In those cases, we have to keep track of the errors for those nodes which are intermediate nodes of a cycle.

An import path is the list of the AST nodes which we visit during an Import call. If node A depends on node B then the path contains an A->B edge. From the call stack of the import functions, we can read the very same path.

Now imagine the following AST, where the -> represents dependency in terms of the import (all nodes are declarations).

A->B->C->D
   `->E

We would like to import A. The import behaves like a DFS, so we will visit the nodes in this order: ABCDE. During the visitation we will have the following import paths:

A
AB
ABC
ABCD
ABC
AB
ABE
AB
A

If during the visit of E there is an error then we set an error for E, then as the call stack shrinks for B, then for A:

A
AB
ABC
ABCD
ABC
AB
ABE // Error! Set an error to E
AB  // Set an error to B
A   // Set an error to A

However, during the import we could import C and D without any error and they are independent of A,B and E. We must not set up an error for C and D. So, at the end of the import we have an entry in ImportDeclErrors for A,B,E but not for C,D.

Now, what happens if there is a cycle in the import path? Let’s consider this AST:

A->B->C->A
   `->E

During the visitation, we will have the below import paths and if during the visit of E there is an error then we will set up an error for E,B,A. But what’s up with C?

A
AB
ABC
ABCA
ABC
AB
ABE // Error! Set an error to E
AB  // Set an error to B
A   // Set an error to A

This time we know that both B and C are dependent on A. This means we must set up an error for C too. As the call stack reverses back we get to A and we must set up an error to all nodes which depend on A (this includes C). But C is no longer on the import path, it just had been previously. Such a situation can happen only if during the visitation we had a cycle. If we didn’t have any cycle, then the normal way of passing an Error object through the call stack could handle the situation. This is why we must track cycles during the import process for each visited declaration.

Lookup Problems

When we import a declaration from the source context then we check whether we already have a structurally equivalent node with the same name in the “to” context. If the “from” node is a definition and the found one is also a definition, then we do not create a new node, instead, we mark the found node as the imported node. If the found definition and the one we want to import have the same name but they are structurally in-equivalent, then we have an ODR violation in case of C++. If the “from” node is not a definition then we add that to the redeclaration chain of the found node. This behaviour is essential when we merge ASTs from different translation units which include the same header file(s). For example, we want to have only one definition for the class template std::vector, even if we included <vector> in several translation units.

To find a structurally equivalent node we can use the regular C/C++ lookup functions: DeclContext::noload_lookup() and DeclContext::localUncachedLookup(). These functions do respect the C/C++ name hiding rules, thus you cannot find certain declarations in a given declaration context. For instance, unnamed declarations (anonymous structs), non-first friend declarations and template specializations are hidden. This is a problem, because if we use the regular C/C++ lookup then we create redundant AST nodes during the merge! Also, having two instances of the same node could result in false structural in-equivalencies of other nodes which depend on the duplicated node. Because of these reasons, we created a lookup class which has the sole purpose to register all declarations, so later they can be looked up by subsequent import requests. This is the ASTImporterLookupTable class. This lookup table should be shared amongst the different ASTImporter instances if they happen to import to the very same “to” context. This is why we can use the importer specific lookup only via the ASTImporterSharedState class.

ExternalASTSource

The ExternalASTSource is an abstract interface associated with the ASTContext class. It provides the ability to read the declarations stored within a declaration context either for iteration or for name lookup. A declaration context with an external AST source may load its declarations on-demand. This means that the list of declarations (represented as a linked list, the head is DeclContext::FirstDecl) could be empty. However, member functions like DeclContext::lookup() may initiate a load.

Usually, external sources are associated with precompiled headers. For example, when we load a class from a PCH then the members are loaded only if we do want to look up something in the class’ context.

In case of LLDB, an implementation of the ExternalASTSource interface is attached to the AST context which is related to the parsed expression. This implementation of the ExternalASTSource interface is realized with the help of the ASTImporter class. This way, LLDB can reuse Clang’s parsing machinery while synthesizing the underlying AST from the debug data (e.g. from DWARF). From the view of the ASTImporter this means both the “to” and the “from” context may have declaration contexts with external lexical storage. If a DeclContext in the “to” AST context has external lexical storage then we must take extra attention to work only with the already loaded declarations! Otherwise, we would end up with an uncontrolled import process. For instance, if we used the regular DeclContext::lookup() to find the existing declarations in the “to” context then the lookup() call itself would initiate a new import while we are in the middle of importing a declaration! (By the time we initiate the lookup we haven’t registered yet that we already started to import the node of the “from” context.) This is why we use DeclContext::noload_lookup() instead.

Class Template Instantiations

Different translation units may have class template instantiations with the same template arguments, but with a different set of instantiated MethodDecls and FieldDecls. Consider the following files:

// x.h
template <typename T>
struct X {
    int a{0}; // FieldDecl with InitListExpr
    X(char) : a(3) {}     // (1)
    X(int) {}             // (2)
};

// foo.cpp
void foo() {
    // ClassTemplateSpec with ctor (1): FieldDecl without InitlistExpr
    X<char> xc('c');
}

// bar.cpp
void bar() {
    // ClassTemplateSpec with ctor (2): FieldDecl WITH InitlistExpr
    X<char> xc(1);
}

In foo.cpp we use the constructor with number (1), which explicitly initializes the member a to 3, thus the InitListExpr {0} is not used here and the AST node is not instantiated. However, in the case of bar.cpp we use the constructor with number (2), which does not explicitly initialize the a member, so the default InitListExpr is needed and thus instantiated. When we merge the AST of foo.cpp and bar.cpp we must create an AST node for the class template instantiation of X<char> which has all the required nodes. Therefore, when we find an existing ClassTemplateSpecializationDecl then we merge the fields of the ClassTemplateSpecializationDecl in the “from” context in a way that the InitListExpr is copied if not existent yet. The same merge mechanism should be done in the cases of instantiated default arguments and exception specifications of functions.

Visibility of Declarations

During import of a global variable with external visibility, the lookup will find variables (with the same name) but with static visibility (linkage). Clearly, we cannot put them into the same redeclaration chain. The same is true the in case of functions. Also, we have to take care of other kinds of declarations like enums, classes, etc. if they are in anonymous namespaces. Therefore, we filter the lookup results and consider only those which have the same visibility as the declaration we currently import.

We consider two declarations in two anonymous namespaces to have the same visibility only if they are imported from the same AST context.

Strategies to Handle Conflicting Names

During the import we lookup existing declarations with the same name. We filter the lookup results based on their visibility. If any of the found declarations are not structurally equivalent then we bumped to a name conflict error (ODR violation in C++). In this case, we return with an Error and we set up the Error object for the declaration. However, some clients of the ASTImporter may require a different, perhaps less conservative and more liberal error handling strategy.

E.g. static analysis clients may benefit if the node is created even if there is a name conflict. During the CTU analysis of certain projects, we recognized that there are global declarations which collide with declarations from other translation units, but they are not referenced outside from their translation unit. These declarations should be in an unnamed namespace ideally. If we treat these collisions liberally then CTU analysis can find more results. Note, the feature be able to choose between name conflict handling strategies is still an ongoing work.

The CFG class

The CFG class is designed to represent a source-level control-flow graph for a single statement (Stmt*). Typically instances of CFG are constructed for function bodies (usually an instance of CompoundStmt), but can also be instantiated to represent the control-flow of any class that subclasses Stmt, which includes simple expressions. Control-flow graphs are especially useful for performing flow- or path-sensitive program analyses on a given function.

Basic Blocks

Concretely, an instance of CFG is a collection of basic blocks. Each basic block is an instance of CFGBlock, which simply contains an ordered sequence of Stmt* (each referring to statements in the AST). The ordering of statements within a block indicates unconditional flow of control from one statement to the next. Conditional control-flow is represented using edges between basic blocks. The statements within a given CFGBlock can be traversed using the CFGBlock::*iterator interface.

A CFG object owns the instances of CFGBlock within the control-flow graph it represents. Each CFGBlock within a CFG is also uniquely numbered (accessible via CFGBlock::getBlockID()). Currently the number is based on the ordering the blocks were created, but no assumptions should be made on how CFGBlocks are numbered other than their numbers are unique and that they are numbered from 0..N-1 (where N is the number of basic blocks in the CFG).

Entry and Exit Blocks

Each instance of CFG contains two special blocks: an entry block (accessible via CFG::getEntry()), which has no incoming edges, and an exit block (accessible via CFG::getExit()), which has no outgoing edges. Neither block contains any statements, and they serve the role of providing a clear entrance and exit for a body of code such as a function body. The presence of these empty blocks greatly simplifies the implementation of many analyses built on top of CFGs.

Conditional Control-Flow

Conditional control-flow (such as those induced by if-statements and loops) is represented as edges between CFGBlocks. Because different C language constructs can induce control-flow, each CFGBlock also records an extra Stmt* that represents the terminator of the block. A terminator is simply the statement that caused the control-flow, and is used to identify the nature of the conditional control-flow between blocks. For example, in the case of an if-statement, the terminator refers to the IfStmt object in the AST that represented the given branch.

To illustrate, consider the following code example:

int foo(int x) {
  x = x + 1;
  if (x > 2)
    x++;
  else {
    x += 2;
    x *= 2;
  }

  return x;
}

After invoking the parser+semantic analyzer on this code fragment, the AST of the body of foo is referenced by a single Stmt*. We can then construct an instance of CFG representing the control-flow graph of this function body by single call to a static class method:

Stmt *FooBody = ...
std::unique_ptr<CFG> FooCFG = CFG::buildCFG(FooBody);

Along with providing an interface to iterate over its CFGBlocks, the CFG class also provides methods that are useful for debugging and visualizing CFGs. For example, the method CFG::dump() dumps a pretty-printed version of the CFG to standard error. This is especially useful when one is using a debugger such as gdb. For example, here is the output of FooCFG->dump():

[ B5 (ENTRY) ]
   Predecessors (0):
   Successors (1): B4

[ B4 ]
   1: x = x + 1
   2: (x > 2)
   T: if [B4.2]
   Predecessors (1): B5
   Successors (2): B3 B2

[ B3 ]
   1: x++
   Predecessors (1): B4
   Successors (1): B1

[ B2 ]
   1: x += 2
   2: x *= 2
   Predecessors (1): B4
   Successors (1): B1

[ B1 ]
   1: return x;
   Predecessors (2): B2 B3
   Successors (1): B0

[ B0 (EXIT) ]
   Predecessors (1): B1
   Successors (0):

For each block, the pretty-printed output displays for each block the number of predecessor blocks (blocks that have outgoing control-flow to the given block) and successor blocks (blocks that have control-flow that have incoming control-flow from the given block). We can also clearly see the special entry and exit blocks at the beginning and end of the pretty-printed output. For the entry block (block B5), the number of predecessor blocks is 0, while for the exit block (block B0) the number of successor blocks is 0.

The most interesting block here is B4, whose outgoing control-flow represents the branching caused by the sole if-statement in foo. Of particular interest is the second statement in the block, (x > 2), and the terminator, printed as if [B4.2]. The second statement represents the evaluation of the condition of the if-statement, which occurs before the actual branching of control-flow. Within the CFGBlock for B4, the Stmt* for the second statement refers to the actual expression in the AST for (x > 2). Thus pointers to subclasses of Expr can appear in the list of statements in a block, and not just subclasses of Stmt that refer to proper C statements.

The terminator of block B4 is a pointer to the IfStmt object in the AST. The pretty-printer outputs if [B4.2] because the condition expression of the if-statement has an actual place in the basic block, and thus the terminator is essentially referring to the expression that is the second statement of block B4 (i.e., B4.2). In this manner, conditions for control-flow (which also includes conditions for loops and switch statements) are hoisted into the actual basic block.

Constant Folding in the Clang AST

There are several places where constants and constant folding matter a lot to the Clang front-end. First, in general, we prefer the AST to retain the source code as close to how the user wrote it as possible. This means that if they wrote “5+4”, we want to keep the addition and two constants in the AST, we don’t want to fold to “9”. This means that constant folding in various ways turns into a tree walk that needs to handle the various cases.

However, there are places in both C and C++ that require constants to be folded. For example, the C standard defines what an “integer constant expression” (i-c-e) is with very precise and specific requirements. The language then requires i-c-e’s in a lot of places (for example, the size of a bitfield, the value for a case statement, etc). For these, we have to be able to constant fold the constants, to do semantic checks (e.g., verify bitfield size is non-negative and that case statements aren’t duplicated). We aim for Clang to be very pedantic about this, diagnosing cases when the code does not use an i-c-e where one is required, but accepting the code unless running with -pedantic-errors.

Things get a little bit more tricky when it comes to compatibility with real-world source code. Specifically, GCC has historically accepted a huge superset of expressions as i-c-e’s, and a lot of real world code depends on this unfortunate accident of history (including, e.g., the glibc system headers). GCC accepts anything its “fold” optimizer is capable of reducing to an integer constant, which means that the definition of what it accepts changes as its optimizer does. One example is that GCC accepts things like “case X-X:” even when X is a variable, because it can fold this to 0.

Another issue are how constants interact with the extensions we support, such as __builtin_constant_p, __builtin_inf, __extension__ and many others. C99 obviously does not specify the semantics of any of these extensions, and the definition of i-c-e does not include them. However, these extensions are often used in real code, and we have to have a way to reason about them.

Finally, this is not just a problem for semantic analysis. The code generator and other clients have to be able to fold constants (e.g., to initialize global variables) and have to handle a superset of what C99 allows. Further, these clients can benefit from extended information. For example, we know that “foo() || 1” always evaluates to true, but we can’t replace the expression with true because it has side effects.

Implementation Approach

After trying several different approaches, we’ve finally converged on a design (Note, at the time of this writing, not all of this has been implemented, consider this a design goal!). Our basic approach is to define a single recursive evaluation method (Expr::Evaluate), which is implemented in AST/ExprConstant.cpp. Given an expression with “scalar” type (integer, fp, complex, or pointer) this method returns the following information:

  • Whether the expression is an integer constant expression, a general constant that was folded but has no side effects, a general constant that was folded but that does have side effects, or an uncomputable/unfoldable value.

  • If the expression was computable in any way, this method returns the APValue for the result of the expression.

  • If the expression is not evaluatable at all, this method returns information on one of the problems with the expression. This includes a SourceLocation for where the problem is, and a diagnostic ID that explains the problem. The diagnostic should have ERROR type.

  • If the expression is not an integer constant expression, this method returns information on one of the problems with the expression. This includes a SourceLocation for where the problem is, and a diagnostic ID that explains the problem. The diagnostic should have EXTENSION type.

This information gives various clients the flexibility that they want, and we will eventually have some helper methods for various extensions. For example, Sema should have a Sema::VerifyIntegerConstantExpression method, which calls Evaluate on the expression. If the expression is not foldable, the error is emitted, and it would return true. If the expression is not an i-c-e, the EXTENSION diagnostic is emitted. Finally it would return false to indicate that the AST is OK.

Other clients can use the information in other ways, for example, codegen can just use expressions that are foldable in any way.

Extensions

This section describes how some of the various extensions Clang supports interacts with constant evaluation:

  • __extension__: The expression form of this extension causes any evaluatable subexpression to be accepted as an integer constant expression.

  • __builtin_constant_p: This returns true (as an integer constant expression) if the operand evaluates to either a numeric value (that is, not a pointer cast to integral type) of integral, enumeration, floating or complex type, or if it evaluates to the address of the first character of a string literal (possibly cast to some other type). As a special case, if __builtin_constant_p is the (potentially parenthesized) condition of a conditional operator expression (”?:”), only the true side of the conditional operator is considered, and it is evaluated with full constant folding.

  • __builtin_choose_expr: The condition is required to be an integer constant expression, but we accept any constant as an “extension of an extension”. This only evaluates one operand depending on which way the condition evaluates.

  • __builtin_classify_type: This always returns an integer constant expression.

  • __builtin_inf, nan, ...: These are treated just like a floating-point literal.

  • __builtin_abs, copysign, ...: These are constant folded as general constant expressions.

  • __builtin_strlen and strlen: These are constant folded as integer constant expressions if the argument is a string literal.

The Sema Library

This library is called by the Parser library during parsing to do semantic analysis of the input. For valid programs, Sema builds an AST for parsed constructs.

The CodeGen Library

CodeGen takes an AST as input and produces LLVM IR code from it.

How to change Clang

How to add an attribute

Attributes are a form of metadata that can be attached to a program construct, allowing the programmer to pass semantic information along to the compiler for various uses. For example, attributes may be used to alter the code generation for a program construct, or to provide extra semantic information for static analysis. This document explains how to add a custom attribute to Clang. Documentation on existing attributes can be found here.

Attribute Basics

Attributes in Clang are handled in three stages: parsing into a parsed attribute representation, conversion from a parsed attribute into a semantic attribute, and then the semantic handling of the attribute.

Parsing of the attribute is determined by the various syntactic forms attributes can take, such as GNU, C++11, and Microsoft style attributes, as well as other information provided by the table definition of the attribute. Ultimately, the parsed representation of an attribute object is an ParsedAttr object. These parsed attributes chain together as a list of parsed attributes attached to a declarator or declaration specifier. The parsing of attributes is handled automatically by Clang, except for attributes spelled as keywords. When implementing a keyword attribute, the parsing of the keyword and creation of the ParsedAttr object must be done manually.

Eventually, Sema::ProcessDeclAttributeList() is called with a Decl and a ParsedAttr, at which point the parsed attribute can be transformed into a semantic attribute. The process by which a parsed attribute is converted into a semantic attribute depends on the attribute definition and semantic requirements of the attribute. The end result, however, is that the semantic attribute object is attached to the Decl object, and can be obtained by a call to Decl::getAttr<T>(). Similarly, for statement attributes, Sema::ProcessStmtAttributes() is called with a Stmt a list of ParsedAttr objects to be converted into a semantic attribute.

The structure of the semantic attribute is also governed by the attribute definition given in Attr.td. This definition is used to automatically generate functionality used for the implementation of the attribute, such as a class derived from clang::Attr, information for the parser to use, automated semantic checking for some attributes, etc.

include/clang/Basic/Attr.td

The first step to adding a new attribute to Clang is to add its definition to include/clang/Basic/Attr.td. This tablegen definition must derive from the Attr (tablegen, not semantic) type, or one of its derivatives. Most attributes will derive from the InheritableAttr type, which specifies that the attribute can be inherited by later redeclarations of the Decl it is associated with. InheritableParamAttr is similar to InheritableAttr, except that the attribute is written on a parameter instead of a declaration. If the attribute applies to statements, it should inherit from StmtAttr. If the attribute is intended to apply to a type instead of a declaration, such an attribute should derive from TypeAttr, and will generally not be given an AST representation. (Note that this document does not cover the creation of type attributes.) An attribute that inherits from IgnoredAttr is parsed, but will generate an ignored attribute diagnostic when used, which may be useful when an attribute is supported by another vendor but not supported by clang.

The definition will specify several key pieces of information, such as the semantic name of the attribute, the spellings the attribute supports, the arguments the attribute expects, and more. Most members of the Attr tablegen type do not require definitions in the derived definition as the default suffice. However, every attribute must specify at least a spelling list, a subject list, and a documentation list.

Spellings

All attributes are required to specify a spelling list that denotes the ways in which the attribute can be spelled. For instance, a single semantic attribute may have a keyword spelling, as well as a C++11 spelling and a GNU spelling. An empty spelling list is also permissible and may be useful for attributes which are created implicitly. The following spellings are accepted:

Spelling

Description

GNU

Spelled with a GNU-style __attribute__((attr)) syntax and placement.

CXX11

Spelled with a C++-style [[attr]] syntax with an optional vendor-specific namespace.

C2x

Spelled with a C-style [[attr]] syntax with an optional vendor-specific namespace.

Declspec

Spelled with a Microsoft-style __declspec(attr) syntax.

Keyword

The attribute is spelled as a keyword, and required custom parsing.

GCC

Specifies two or three spellings: the first is a GNU-style spelling, the second is a C++-style spelling with the gnu namespace, and the third is an optional C-style spelling with the gnu namespace. Attributes should only specify this spelling for attributes supported by GCC.

Clang

Specifies two or three spellings: the first is a GNU-style spelling, the second is a C++-style spelling with the clang namespace, and the third is an optional C-style spelling with the clang namespace. By default, a C-style spelling is provided.

Pragma

The attribute is spelled as a #pragma, and requires custom processing within the preprocessor. If the attribute is meant to be used by Clang, it should set the namespace to "clang". Note that this spelling is not used for declaration attributes.

Subjects

Attributes appertain to one or more subjects. If the attribute attempts to attach to a subject that is not in the subject list, a diagnostic is issued automatically. Whether the diagnostic is a warning or an error depends on how the attribute’s SubjectList is defined, but the default behavior is to warn. The diagnostics displayed to the user are automatically determined based on the subjects in the list, but a custom diagnostic parameter can also be specified in the SubjectList. The diagnostics generated for subject list violations are calculated automatically or specified by the subject list itself. If a previously unused Decl node is added to the SubjectList, the logic used to automatically determine the diagnostic parameter in utils/TableGen/ClangAttrEmitter.cpp may need to be updated.

By default, all subjects in the SubjectList must either be a Decl node defined in DeclNodes.td, or a statement node defined in StmtNodes.td. However, more complex subjects can be created by creating a SubsetSubject object. Each such object has a base subject which it appertains to (which must be a Decl or Stmt node, and not a SubsetSubject node), and some custom code which is called when determining whether an attribute appertains to the subject. For instance, a NonBitField SubsetSubject appertains to a FieldDecl, and tests whether the given FieldDecl is a bit field. When a SubsetSubject is specified in a SubjectList, a custom diagnostic parameter must also be provided.

Diagnostic checking for attribute subject lists for declaration and statement attributes is automated except when HasCustomParsing is set to 1.

Documentation

All attributes must have some form of documentation associated with them. Documentation is table generated on the public web server by a server-side process that runs daily. Generally, the documentation for an attribute is a stand-alone definition in include/clang/Basic/AttrDocs.td that is named after the attribute being documented.

If the attribute is not for public consumption, or is an implicitly-created attribute that has no visible spelling, the documentation list can specify the InternalOnly object. Otherwise, the attribute should have its documentation added to AttrDocs.td.

Documentation derives from the Documentation tablegen type. All derived types must specify a documentation category and the actual documentation itself. Additionally, it can specify a custom heading for the attribute, though a default heading will be chosen when possible.

There are four predefined documentation categories: DocCatFunction for attributes that appertain to function-like subjects, DocCatVariable for attributes that appertain to variable-like subjects, DocCatType for type attributes, and DocCatStmt for statement attributes. A custom documentation category should be used for groups of attributes with similar functionality. Custom categories are good for providing overview information for the attributes grouped under it. For instance, the consumed annotation attributes define a custom category, DocCatConsumed, that explains what consumed annotations are at a high level.

Documentation content (whether it is for an attribute or a category) is written using reStructuredText (RST) syntax.

After writing the documentation for the attribute, it should be locally tested to ensure that there are no issues generating the documentation on the server. Local testing requires a fresh build of clang-tblgen. To generate the attribute documentation, execute the following command:

clang-tblgen -gen-attr-docs -I /path/to/clang/include /path/to/clang/include/clang/Basic/Attr.td -o /path/to/clang/docs/AttributeReference.rst

When testing locally, do not commit changes to AttributeReference.rst. This file is generated by the server automatically, and any changes made to this file will be overwritten.

Arguments

Attributes may optionally specify a list of arguments that can be passed to the attribute. Attribute arguments specify both the parsed form and the semantic form of the attribute. For example, if Args is [StringArgument<"Arg1">, IntArgument<"Arg2">] then __attribute__((myattribute("Hello", 3))) will be a valid use; it requires two arguments while parsing, and the Attr subclass’ constructor for the semantic attribute will require a string and integer argument.

All arguments have a name and a flag that specifies whether the argument is optional. The associated C++ type of the argument is determined by the argument definition type. If the existing argument types are insufficient, new types can be created, but it requires modifying utils/TableGen/ClangAttrEmitter.cpp to properly support the type.

Other Properties

The Attr definition has other members which control the behavior of the attribute. Many of them are special-purpose and beyond the scope of this document, however a few deserve mention.

If the parsed form of the attribute is more complex, or differs from the semantic form, the HasCustomParsing bit can be set to 1 for the class, and the parsing code in Parser::ParseGNUAttributeArgs() can be updated for the special case. Note that this only applies to arguments with a GNU spelling – attributes with a __declspec spelling currently ignore this flag and are handled by Parser::ParseMicrosoftDeclSpec.

Note that setting this member to 1 will opt out of common attribute semantic handling, requiring extra implementation efforts to ensure the attribute appertains to the appropriate subject, etc.

If the attribute should not be propagated from a template declaration to an instantiation of the template, set the Clone member to 0. By default, all attributes will be cloned to template instantiations.

Attributes that do not require an AST node should set the ASTNode field to 0 to avoid polluting the AST. Note that anything inheriting from TypeAttr or IgnoredAttr automatically do not generate an AST node. All other attributes generate an AST node by default. The AST node is the semantic representation of the attribute.

The LangOpts field specifies a list of language options required by the attribute. For instance, all of the CUDA-specific attributes specify [CUDA] for the LangOpts field, and when the CUDA language option is not enabled, an “attribute ignored” warning diagnostic is emitted. Since language options are not table generated nodes, new language options must be created manually and should specify the spelling used by LangOptions class.

Custom accessors can be generated for an attribute based on the spelling list for that attribute. For instance, if an attribute has two different spellings: ‘Foo’ and ‘Bar’, accessors can be created: [Accessor<"isFoo", [GNU<"Foo">]>, Accessor<"isBar", [GNU<"Bar">]>] These accessors will be generated on the semantic form of the attribute, accepting no arguments and returning a bool.

Attributes that do not require custom semantic handling should set the SemaHandler field to 0. Note that anything inheriting from IgnoredAttr automatically do not get a semantic handler. All other attributes are assumed to use a semantic handler by default. Attributes without a semantic handler are not given a parsed attribute Kind enumerator.

“Simple” attributes, that require no custom semantic processing aside from what is automatically provided, should set the SimpleHandler field to 1.

Target-specific attributes may share a spelling with other attributes in different targets. For instance, the ARM and MSP430 targets both have an attribute spelled GNU<"interrupt">, but with different parsing and semantic requirements. To support this feature, an attribute inheriting from TargetSpecificAttribute may specify a ParseKind field. This field should be the same value between all arguments sharing a spelling, and corresponds to the parsed attribute’s Kind enumerator. This allows attributes to share a parsed attribute kind, but have distinct semantic attribute classes. For instance, ParsedAttr is the shared parsed attribute kind, but ARMInterruptAttr and MSP430InterruptAttr are the semantic attributes generated.

By default, attribute arguments are parsed in an evaluated context. If the arguments for an attribute should be parsed in an unevaluated context (akin to the way the argument to a sizeof expression is parsed), set ParseArgumentsAsUnevaluated to 1.

If additional functionality is desired for the semantic form of the attribute, the AdditionalMembers field specifies code to be copied verbatim into the semantic attribute class object, with public access.

If two or more attributes cannot be used in combination on the same declaration or statement, a MutualExclusions definition can be supplied to automatically generate diagnostic code. This will disallow the attribute combinations regardless of spellings used. Additionally, it will diagnose combinations within the same attribute list, different attribute list, and redeclarations, as appropriate.

Boilerplate

All semantic processing of declaration attributes happens in lib/Sema/SemaDeclAttr.cpp, and generally starts in the ProcessDeclAttribute() function. If the attribute has the SimpleHandler field set to 1 then the function to process the attribute will be automatically generated, and nothing needs to be done here. Otherwise, write a new handleYourAttr() function, and add that to the switch statement. Please do not implement handling logic directly in the case for the attribute.

Unless otherwise specified by the attribute definition, common semantic checking of the parsed attribute is handled automatically. This includes diagnosing parsed attributes that do not appertain to the given Decl or Stmt, ensuring the correct minimum number of arguments are passed, etc.

If the attribute adds additional warnings, define a DiagGroup in include/clang/Basic/DiagnosticGroups.td named after the attribute’s Spelling with “_”s replaced by “-“s. If there is only a single diagnostic, it is permissible to use InGroup<DiagGroup<"your-attribute">> directly in DiagnosticSemaKinds.td

All semantic diagnostics generated for your attribute, including automatically- generated ones (such as subjects and argument counts), should have a corresponding test case.

Semantic handling

Most attributes are implemented to have some effect on the compiler. For instance, to modify the way code is generated, or to add extra semantic checks for an analysis pass, etc. Having added the attribute definition and conversion to the semantic representation for the attribute, what remains is to implement the custom logic requiring use of the attribute.

The clang::Decl object can be queried for the presence or absence of an attribute using hasAttr<T>(). To obtain a pointer to the semantic representation of the attribute, getAttr<T> may be used.

The clang::AttributedStmt object can be queried for the presence or absence of an attribute by calling getAttrs() and looping over the list of attributes.

How to add an expression or statement

Expressions and statements are one of the most fundamental constructs within a compiler, because they interact with many different parts of the AST, semantic analysis, and IR generation. Therefore, adding a new expression or statement kind into Clang requires some care. The following list details the various places in Clang where an expression or statement needs to be introduced, along with patterns to follow to ensure that the new expression or statement works well across all of the C languages. We focus on expressions, but statements are similar.

  1. Introduce parsing actions into the parser. Recursive-descent parsing is mostly self-explanatory, but there are a few things that are worth keeping in mind:

    • Keep as much source location information as possible! You’ll want it later to produce great diagnostics and support Clang’s various features that map between source code and the AST.

    • Write tests for all of the “bad” parsing cases, to make sure your recovery is good. If you have matched delimiters (e.g., parentheses, square brackets, etc.), use Parser::BalancedDelimiterTracker to give nice diagnostics when things go wrong.

  2. Introduce semantic analysis actions into Sema. Semantic analysis should always involve two functions: an ActOnXXX function that will be called directly from the parser, and a BuildXXX function that performs the actual semantic analysis and will (eventually!) build the AST node. It’s fairly common for the ActOnCXX function to do very little (often just some minor translation from the parser’s representation to Sema’s representation of the same thing), but the separation is still important: C++ template instantiation, for example, should always call the BuildXXX variant. Several notes on semantic analysis before we get into construction of the AST:

    • Your expression probably involves some types and some subexpressions. Make sure to fully check that those types, and the types of those subexpressions, meet your expectations. Add implicit conversions where necessary to make sure that all of the types line up exactly the way you want them. Write extensive tests to check that you’re getting good diagnostics for mistakes and that you can use various forms of subexpressions with your expression.

    • When type-checking a type or subexpression, make sure to first check whether the type is “dependent” (Type::isDependentType()) or whether a subexpression is type-dependent (Expr::isTypeDependent()). If any of these return true, then you’re inside a template and you can’t do much type-checking now. That’s normal, and your AST node (when you get there) will have to deal with this case. At this point, you can write tests that use your expression within templates, but don’t try to instantiate the templates.

    • For each subexpression, be sure to call Sema::CheckPlaceholderExpr() to deal with “weird” expressions that don’t behave well as subexpressions. Then, determine whether you need to perform lvalue-to-rvalue conversions (Sema::DefaultLvalueConversions) or the usual unary conversions (Sema::UsualUnaryConversions), for places where the subexpression is producing a value you intend to use.

    • Your BuildXXX function will probably just return ExprError() at this point, since you don’t have an AST. That’s perfectly fine, and shouldn’t impact your testing.

  3. Introduce an AST node for your new expression. This starts with declaring the node in include/Basic/StmtNodes.td and creating a new class for your expression in the appropriate include/AST/Expr*.h header. It’s best to look at the class for a similar expression to get ideas, and there are some specific things to watch for:

    • If you need to allocate memory, use the ASTContext allocator to allocate memory. Never use raw malloc or new, and never hold any resources in an AST node, because the destructor of an AST node is never called.

    • Make sure that getSourceRange() covers the exact source range of your expression. This is needed for diagnostics and for IDE support.

    • Make sure that children() visits all of the subexpressions. This is important for a number of features (e.g., IDE support, C++ variadic templates). If you have sub-types, you’ll also need to visit those sub-types in RecursiveASTVisitor.

    • Add printing support (StmtPrinter.cpp) for your expression.

    • Add profiling support (StmtProfile.cpp) for your AST node, noting the distinguishing (non-source location) characteristics of an instance of your expression. Omitting this step will lead to hard-to-diagnose failures regarding matching of template declarations.

    • Add serialization support (ASTReaderStmt.cpp, ASTWriterStmt.cpp) for your AST node.

  4. Teach semantic analysis to build your AST node. At this point, you can wire up your Sema::BuildXXX function to actually create your AST. A few things to check at this point:

    • If your expression can construct a new C++ class or return a new Objective-C object, be sure to update and then call Sema::MaybeBindToTemporary for your just-created AST node to be sure that the object gets properly destructed. An easy way to test this is to return a C++ class with a private destructor: semantic analysis should flag an error here with the attempt to call the destructor.

    • Inspect the generated AST by printing it using clang -cc1 -ast-print, to make sure you’re capturing all of the important information about how the AST was written.

    • Inspect the generated AST under clang -cc1 -ast-dump to verify that all of the types in the generated AST line up the way you want them. Remember that clients of the AST should never have to “think” to understand what’s going on. For example, all implicit conversions should show up explicitly in the AST.

    • Write tests that use your expression as a subexpression of other, well-known expressions. Can you call a function using your expression as an argument? Can you use the ternary operator?

  5. Teach code generation to create IR to your AST node. This step is the first (and only) that requires knowledge of LLVM IR. There are several things to keep in mind:

    • Code generation is separated into scalar/aggregate/complex and lvalue/rvalue paths, depending on what kind of result your expression produces. On occasion, this requires some careful factoring of code to avoid duplication.

    • CodeGenFunction contains functions ConvertType and ConvertTypeForMem that convert Clang’s types (clang::Type* or clang::QualType) to LLVM types. Use the former for values, and the latter for memory locations: test with the C++ “bool” type to check this. If you find that you are having to use LLVM bitcasts to make the subexpressions of your expression have the type that your expression expects, STOP! Go fix semantic analysis and the AST so that you don’t need these bitcasts.

    • The CodeGenFunction class has a number of helper functions to make certain operations easy, such as generating code to produce an lvalue or an rvalue, or to initialize a memory location with a given value. Prefer to use these functions rather than directly writing loads and stores, because these functions take care of some of the tricky details for you (e.g., for exceptions).

    • If your expression requires some special behavior in the event of an exception, look at the push*Cleanup functions in CodeGenFunction to introduce a cleanup. You shouldn’t have to deal with exception-handling directly.

    • Testing is extremely important in IR generation. Use clang -cc1 -emit-llvm and FileCheck to verify that you’re generating the right IR.

  6. Teach template instantiation how to cope with your AST node, which requires some fairly simple code:

    • Make sure that your expression’s constructor properly computes the flags for type dependence (i.e., the type your expression produces can change from one instantiation to the next), value dependence (i.e., the constant value your expression produces can change from one instantiation to the next), instantiation dependence (i.e., a template parameter occurs anywhere in your expression), and whether your expression contains a parameter pack (for variadic templates). Often, computing these flags just means combining the results from the various types and subexpressions.

    • Add TransformXXX and RebuildXXX functions to the TreeTransform class template in Sema. TransformXXX should (recursively) transform all of the subexpressions and types within your expression, using getDerived().TransformYYY. If all of the subexpressions and types transform without error, it will then call the RebuildXXX function, which will in turn call getSema().BuildXXX to perform semantic analysis and build your expression.

    • To test template instantiation, take those tests you wrote to make sure that you were type checking with type-dependent expressions and dependent types (from step #2) and instantiate those templates with various types, some of which type-check and some that don’t, and test the error messages in each case.

  7. There are some “extras” that make other features work better. It’s worth handling these extras to give your expression complete integration into Clang:

    • Add code completion support for your expression in SemaCodeComplete.cpp.

    • If your expression has types in it, or has any “interesting” features other than subexpressions, extend libclang’s CursorVisitor to provide proper visitation for your expression, enabling various IDE features such as syntax highlighting, cross-referencing, and so on. The c-index-test helper program can be used to test these features.